QKT Audio Instruction v2
-
Upload
brad-drenth -
Category
Documents
-
view
12 -
download
1
Transcript of QKT Audio Instruction v2
QKT AUDIO SET UP
1. Select rtr-vl-main on the KVM
to get to the VistaLink
2. Open VistaLink Pro (if it is not yet open)
username: administrator
there is no password
3. Select the frame sync for your event
FRM07 then HDFS07
or FRM08 then HDFS08
or FRM15 then HDFS15
4. With the HDFS of your frame sync still selected
click on Configuration and then
View Configuration
5. Click on the Audio Control tab
Then set Input Ch1 and Ch2 to AES
6. On the Audio Process UC tab
Set Output Channel 2 to Channel 1
This sets the frame sync to a Mono Mix
QKT AUDIO SET UPCONTINUED . . . .
7. In the Audio Gain UC, Set Input Channel 1
to between + 10.0 and 24.0 dB
8. Click Apply
You have now set up your QKT Audio
AFTER YOUR EVENT
Be Sure to reset the Mono-Mix so the next show on this
Frame Sync can be in Stereo