QESletter QESletter's Newsletter is belong to QES Management Consultants Sdn Bhd (1115356-X) QES #...
Transcript of QESletter QESletter's Newsletter is belong to QES Management Consultants Sdn Bhd (1115356-X) QES #...
QESletter's Newsletter is belong to QES Management Consultants Sdn Bhd (1115356-X) QES # 65 & 66, May & June 2018
Contents:
1. World No Tobacco Day 4. World OSH Day
2. World Environment Day 5. Gallery - Consultancy & Training
3. World Blood Day HRDF Approved Training Provider
1.World No Tobacco Day
World No Tobacco Day (WNTD) is observed around the world every year on 31 May. It is intended to encourage a 24-hour period of abstinence from all forms of tobacco
consumption around the globe. The day is further intended to draw attention to the widespread prevalence of tobacco use and to negative health effects, which currently lead
to nearly 6 million deaths each year worldwide, including 600,000 of which are the result of non-smokers being exposed to second-hand smoke. The member states of the
World Health Organization (WHO) created World No Tobacco Day in 1987. In the past twenty one years, the day has been met with both enthusiasm and resistance around
the globe from governments, public health organizations, smokers, growers, and the tobacco industry.
WNTD is one of eight official global public health campaigns marked by the WHO, along with World Health Day, World Blood Donor Day, World Immunization Week, World
Tuberculosis Day, World Malaria Day, World Hepatitis Day, and World AIDS Day.
QESletter
Page 1 of 13
QESletter's Newsletter is belong to QES Management Consultants Sdn Bhd (1115356-X) QES # 65 & 66, May & June 2018
2. World Environment Day 3. World Blood Day
World Environment Day (WED) is celebrated on the 5th of June every year, and is the United Every year on 14 June, countries around the world celebrate World Blood
Nation's principal vehicle for encouraging awareness and action for the protection of our Donor Day (WBDD). The event, established in 2004, serves to raise
environment. First held in 1974, it has been a flagship campaign for raising awareness on awareness of the need for safe blood and blood products, and to thank
emerging environmental issues from marine pollution, human over 143 countries annually.
Each year, WED has a new theme that major corporations, NGOs, communities, governments World Blood Donor Day is one of eight official global public health campaigns
and celebrities worldwide adopt to advocate environmental causes. marked by the World Health Organization (WHO), along with World Health
Day, World Tuberculosis Day, World Immunization Week, World Malaria Day,
World Environment Day [WED] was established by the UN General Assembly in 1972 World No Tobacco Day, World Hepatitis Day, and World AIDS Day.
on the first day of the Stockholm Conference on the Human Environment, resulting from
discussions on the integration of human interactions and the environment.Two years later, in 1974
the first WED was held with the theme "Only One Earth". Even though WED
celebration have been held annually since 1974, in 1987 the idea for rotating the center of these
activities through selecting different host countries began.
blood donors for their voluntary, life-saving gifts of blood.
QESletter
Page 2 of 13
4. World OSH Day
This year, the World Day for Safety and Health at Work (SafeDay) and the World Day Against Child Labour (WDACL) are coming together in a joint campaign to improve
the safety and health of young workers and end child labour.
The campaign aims to accelerate action to achieve Sustainable Development Goal (SDG) target 8.8 of safe and secure working environments for all workers by 2030 and SDG
target 8.7 of ending all forms of child labour by 2025. Achieving these goals for the benefit of the next generation of the global workforce requires a concerted and integrated
approach to eliminating child labour and promoting a culture of prevention on occupational safety health (OSH). There are 541 million young workers (15-24 years old) globally.
They account for more than 15 per cent of the world’s labour force and suffer up to a 40 per cent higher rate of non-fatal occupational injuries than adult workers older
than 25. They include 37 million 15-17 year olds
in hazardous child labour.
Other specilised training:
1. CPR & First Aid 5. Safe Handling & Defensive Driving of Forklift
2. Awareness Good Laboratory Practise 6. Awareness Confined Space & ERP
3. Occupational Ergonomics 7. ISO 28000 Supply Chain Security Management System
4. Fire Fighting and Prevention 8. Life Guard - Basic Water Safety & Life Saving
5. Gallery - Consultancy & Training
5.1 ISO 9001 consultation for AV Media KT on 3 May 18
QES Management Consultants Sdn Bhd Khairil Anwar Razali
012-778 3462, 019-778 2769 [email protected]
fb/QES Management Consultants
Page 3 of 13
5.2 ESD for JVC Kenwood on 7 & 8 May 18
5.3 ISO 9001 RA at Evergreen on 11 May 18
5.4 GMP HACCP Halal MUI factory visit Global Palm on 8 June 18
Page 4 of 13
5.5 GMP HACCP & Halal Jakim Awareness training at Marcentils Food on 11 June 18 5.6 USFDA audit at Marcentil on 21 & 22 June 18
5.7 ISO 9001 2015 Awareness & RA at 5.8 ISO 45001 2018 Awareness & IA at Advaltech on 26 June 18
AV Media on 25 June 18
Page 5 of 13
5.9 SLPM training at Marcentil on 26 June 18 5.10 ISO 9001 2015 IA at Evergreen on 27 June 18
5.11 Forklift training at Starson on 27 June 18
5.12 ISO 45001 2018 Talk at Johor Skills on 28 June 18
Page 6 of 13
5.14 Halal visit at Socship & Washer on 29 June 18
QES Management Consultants Sdn Bhd
Inhouse Training Plan for 2018
Code Programme Title Objective Target Audience Duration
ISO 9001 Quality Management System
QMS1 ISO 9001:2015 Workshop on Standard 1. What is the major changes? QMR, QA Manager, Senior Management, QMS 2 days
Interpretation 2. How organization to get ready? Committee
QMS2 ISO 9001:2015 Risk Assessment Methodology 1. Method to adopt? QMR, QA Manager, Senior Management, QMS 1 day
QMS3 New Techniques ISO 9001:2015 Internal Auditing 1. Process-based and Risk-based approach QMR, QA Manager, Senior Management, QMS 2 days
QMS4 Understanding of ISO 9001:2008 1. To increase awareness & understanding of ISO 9001:2008 QMR, QA Manager, Senior Management, QMS 2 days
2. To understand the benefit gains from the standard Committee
QMS5 Interpretation of ISO 9001:2008 Standard 1. To provide correct interpretation of ISO 9001:2008 standard QMR, QA Manager, Senior Management, QMS 1 day
2. To understand each clauses requirements and expectation Committee
3. To understand the 8 Principles
QMS6 Internal Auditing by Process Approach 1. To understand the requirements of ISO 9001:2008 on internal Managers, Engineers, Executives, 2 days
auditing Supervisors or anyone who is responsible
2. To train participant to become qualified internal auditor that is for the development of system and process
equipped with knowledge, skills & experience for quality management
3. To train internal auditor to identify areas for continuous
improvement by using process-based auditing techniques
ISO 14001 Environmental Management System
EMS1 ISO 14001:2015 Workshop on Standard 1. What is the major changes? EMR, QA Manager, Senior Management, EMS/OHSAS 2 days
Interpretation 2. How organization to get ready? Committee
5.13 HACCP visit at Teck Sheng on 28 June 18
Page 7 of 13
EMS2 ISO 14001:2015 Life Cycle Assessment 1. Method to adopt? EMR, QA Manager, Senior Management, EMS/OHSAS 1 day
EMS3 New Techniques ISO 14001:2015 Internal Auditing 1. Process-based and Risk-based approach EMR, QA Manager, Senior Management, EMS/OHSAS 2 days
EMS3 Understanding of ISO 14001:2004 1. To understand the requirements of ISO 14001:2004 and its Managers, Engineers, Executives, Supervisors or anyone 2 days
application who is responsible for the development of system and
2. To continually improve the Environmental Performance of an process for environmental management
organization
EMS4 Conducting an Effective EMS Auditing 1. To have basic concept of Environmental Aspect & Impact identification Managers, Engineers, Executives, Supervisors or anyone 2 days
& assessment who is responsible for the establishment of an Internal
2. To have an understanding of the process of EMS auditing Effective EMS Auditing
EMS5 Identification and Assessment of Environmental 1. To understand the definition of Environmental Aspect & Impact Managers, Engineers, Executives, Supervisors or anyone 2 days
Aspect and Impact 2. To understand and implement the method of identifying Environmental anyone who is responsible for the identifying and
Aspect & Impact assessment of Environmental Aspect & Impact
3. To understand the consideration of factors in deciding significance of
Environmental Aspect & Impact
EMS6 WEEE and RoHS Compliance Implementation and 1. To understand the EU Directive on six banned substances Managers and Engineers especially from Procurement and 2 days
Monitoring 2. To establish a program to comply to RoHS Design/Engineering Dept.
3. To continually ensure the system implementation through audit
OHSAS 18001 Occupational Health & Safety Management System
OHMS1 ISO 45001:2018 1. What is the major changes? Managers, Engineers, Executives, Supervisors or 2 days
2. Main revision from OHSAS 18001 who is responsible for the safety
3. Practical approach for conversion
OHMS2 CLASS Regulation 2013 1. To have an understanding of CLASS Regulation 2013 Managers, Engineers, Executives, Supervisors or 2 days
requirements who is responsible for the handling of chemicals
2. To promote awareness of Occupational Health and Safety
in the organization
OHMS3 Understanding and Implementing an Effective OHSAS 1. To have an understanding of OHSAS 18001 & OSHMS 1722:2005 requirements Managers, Engineers, Executives, Supervisors or anyone 2 days
18001 & MS 1722:2005 Management System 2. To integrate the OHSAS 18001:2007 and MS 1722:2005 who is responsible for the establishment of Occupational
3. To promote awareness of Occupational Health and Safety in an Safety and Health Management System
organization
* For In House Training, to be accomodated with customer preference date
QES Management Consultants Sdn Bhd
Inhouse Training Plan for 2018Code Programme Title Objective Target Audience Duration
OHSAS 18000 Occupational Health & Safety Management System
OHMS4 Conducting an Effective OSHMS Auditing 1. To have an understanding of the OHSAS 18001:2007 Standard Managers, Engineers, Executives, Supervisors or anyone 2 days
2. To have a basic concept of Hazard Identification, Risk Assessment and who is responsible for the establishment of an Internal
Control OHSAS Audiing
3. To have an understanding of the process of OHSAS auditing
OHMS5 Practical Hazard Identification, Risk Assessment and 1. To understand the definition of Hazard Risk Managers, Engineers, Executives, Supervisors or anyone 1 day
Control 2. To understand and implement the method of Hazard Identification, who is responsible for the identifying and assessment of
Risk Assessment and Control Hazard Identification, Risk Assessment & Control
3. To understand the consideration of factors in deciding tolerable &
intolerable risk
OHMS6 Understanding of Malaysia Occupational Safety 1. To have a basic understanding of Malaysian laws Internal auditors, Managers, Engineers, Executives, Legal 2 days
Health Law 2. To be able to identify the law that applies to organization Committee, HR and Admin Executives or anyone who is
3. To enable a staff to become a competent internal OHSAS auditor responsible for taking care of the Occupational Safety &
Health Law
OHMS7 Establishing an Effective Safety & Health 1. To understand the composition and function of the Committee Safety and Health Committee, Managers, Engineers, Admin 2 days
Committee 2. To establish an effective Committee Executives or anyone who is responsible for taking care of
the Occupational Safety & Health Management System
OHMS8 Emergency Preparedness & Response 1. To understand the basic Safety & Health Management System Safety and Health Committee, Response Team, First Aider, 2 days
2. To effectively test the ERP through continuous drill Managers, Engineers or anyone who is responsible for taking
3. To understand the roles and responsibilities of Committee, Response care of the Emergency Preparedness and Response
Team, First Aider and Bomba
3. To understand the roles and
OHMS9 Effective Hazardous Chemicals Handling & Control 1. Understanding the categories of Hazardous Chemicals and its Managers, Engineers, Executives or anyone who is 1 day
nomenclature responsible for the establishment of the Chemical
2. Understanding the Hazardous Chemicals Labelling, Material Safety Management System
Data Sheet (MSDS) and Chemical Safety Data Sheet (CSDS)
3. Understanding the Handling and Storage of Hazardous ChemicalsPage 8 of 13
OHMS10 Effective Accident/Incident Investigation 1. To understand the essential steps in accident/incident investigation Safety and Health Committee, Managers, Engineers, Admin 1 day
2. To understand the root cause and contributing factors in accident Executives or anyone who is responsible for the accident/
3. To understand the content of accident report incident investigation
4. To understand the law govern the accident and reporting system
OHMS11 Safe Working in Confined Space 1. To be more aware towards confined space risk and hazard Safety and Health Committee, Managers, 2 days
2. To understand the regulations and code of practise on safe working Engineers or anyone who involved in
in confined space confined space works.
3. Able to know equipments use in confined space
IATF 16949:2016 Automotive Quality Management System
TS1 Understanding of IATF 16949:2016 1. To understand the requirements of IATF 16949:2016 Managers, Engineers, Executives or anyone who is 2 days
Automotive Quality Management System 2. To equip delegates with the required knowledge on how to responsible to implement ISO/TS 16949:2002
comply with the requirements
3. To enable delegates to carry out required planning for
effective implementation
TS2 Process Oriented Internal Auditing for 1. To understand the requirements of IATF 16949:2016 on internal Managers, Engineers, Executives or anyone who is wishes 2 days
IATF 16949:2016 auditing to become qualified internal auditor
2. To train delegates to become qualified internal auditor
3. To train auditor to identify areas for continual improvement by using
process oriented auditing techniques
TS3 Failure Mode and Effect Analysis (FMEA) 1. To understand the basic concepts, required tools & techniques of Managers, Engineers, Executives or anyone who wishes to 2 days
failure analysis and risk assessment for product & process design introduce FMEA for process and quality improvement
2. Able to implement Design FMEA and Process FMEA programs
effectively
TS4 Advanced Product Quality Planning (APQP) and 1. Be able to establish structured procedure for new model start up and Managers, Engineers, Executives or anyone who wishes to 1 day
Production Part Approval Process (PPAP) product quality planning introduce structured approach for new model start up and
2. Be able to handle and overcome the possible difficulties during new effective product quality planning
model start up
3. To equip delegates with the knowledge, understanding and skills of
project planning and control
* For In House Training, to be accomodated with customer preference date
QES Management Consultants Sdn Bhd
Inhouse Training Plan for 2018
ISO/TS 16949:2009 Automotive Quality Management System
TS5 Statistical Process Control (SPC) for Process and 1. To understand the important elements of SPC and process variation Managers, Engineers, Executives or anyone who wishes to 2 days
Quality Improvement affects the process performance introduce SPC for process and quality improvement
2. To be able to check the process performance through process
capability index
3. To identify steps for implementing SPC program successfully
TS6 International Material Data System (IMDS) 1. Basic understanding on the concepts & application of IMDS ISO/TS Committee, IMDS users and IMDS Coordinator 1 day
2. Able to fulfill ELV Directives by publishing material contents of the
products
TS7 Measurement System Analysis (MSA) for 1. To understand the concept of measurement system Managers, Engineers, Executives or anyone who wishes to 2 days
Effective Measurement / Testing Equioments 2. Be able to apply practical MSA methodology for various types of introduce MSA for effective measuring/testing equipments
measuring and testing equipments
3. Be able to evaluate the MSA result and provide practical solutions
Food Safety Management System
FS1 Introduction of Food Act and Regulations 1. To understand the requirement of Act and its application Personnel who involved in the developing and implementing 1 day
2. Able to fulfill the requirements without obstacle the food handling and service program
FS2 Food Handling and Service Management Program 1. To understand the Food Handling and Service Management Personnel who involved in the developing and implementing 1 day
requirements the food handling and service program
2. Able to demostrate proper handling and service of food
FS3 Understanding and Application of HACCP 1. To understand the type of Food Safety Hazard Personnel who involved in the developing and implementing 1 day
Principles 2. To understand the principles of HACCP and required Pre-requisite the HACCP system also for those who wishes to enhance the
Program understanding of Food Safety Hazards and HACCP
3. Identify the hazards throughout the food production processess Principles
FS4 Effective HACCP Auditing 1. To understand the verification of HACCP Personnel who involved in the verifying and auditing the 1 day
2. Able to plan and carry out the HACCP audit HACCP system also for those who wishes to enhance the
3. Able to continuously look for improvement understanding of Food Safety Hazards and HACCP systemPage 9 of 13
verification
FS5 Good Manufacturing Practises for HACCP 1. To understand the fundamental system on Pre-requisite Program (PRP) Personnel who involved in the developing and implementing 1 day
of GMP HACCP system also for those who wishes to enhance the
2. To understand the procedures that set up the operation condition understanding of Food Safety Hazards and HACCP
3. To limit the food hazards through control of process and facility Princliples
FS6 Documenting the HACCP Plan 1. Provide knowledge and skills in developing HACCP Plan Personnel or HACCP Team who involved in the developing 1 day
2. Ensure the HACCP Plan is continuously updated to latest practise the HACCP system
FS7 Understanding of MS 1500:2004 Standard 1. To understand the MS 1500:2004 standard requirements Managers, Engineers and Supervisors who involved in the 1 day
2. Able to establish and implement the standard and benefit from it Halal products
3. Understand the related certificate and audit process
FS8 Understanding and Application of Halal 1. To understand and fulfill the requirements from Jakim Personnel who involve in food handling especially Food 1 day
Certification from JAKIM 2. Able to apply the certificate and get approval without any obstacle Handlers.
Quality and Productivity Improvement
QP1 Quality Control Circle (QCC) / Innovative & 1. To introduce the concept of QCC/ICC Managers, Engineers or anyone who wishes to introduce 2 days
Creative Circle (ICC) 2. Be able to establish practical QCC/ICC program company wide QCC/ICC in the workplace
3. Be able to identify and use various QC Tools for problem solving
QP2 Measurement and Calibration System 1. To understand the basic terminology for measurement and calibration Managers, Engineers or anyone who wishes to apply and 2 days
2. Able to implement cost effective measurement & calibration system improve current calibration system
according to ISO 9001:2008
QP3 Seven QC Tools for Process and Quality 1. Introduction the concept of seven QC Tools Managers, Engineers or anyone who wishes to introduce 2 days
Improvement 2. Able to solve problems with correct tools Seven QC Tools for process and quality improvement
QP4 Advanced Seven QC Tools for Process and Quality 1. To understand and apply systematic problem solving methodology Managers, Engineers or anyone who wishes to introduce 2 days
Improvement 2. As Management Tools to guide a pool of people to solve problems Advanced Seven QC Tools for process and quality
improvement
QP5 Statistical Process Control (SPC) for Process 1. To understand the important elements of SPC and process variation Managers, Engineers or anyone who wishes to introduce 2 days
and Quality Improvement affects the process performance SPC for process and quality improvement
2. To be able to check the process performance through process
capability index
3. To identify steps for implementing SPC program effectively
* For In House Training, to be accomodated with customer preference date
QES Management Consultants Sdn Bhd
Inhouse Training Plan for 2018
Quality and Productivity Improvement
QP6 Practical Poka Yoke approach in Process 1. To identify the features and advantages of Poka Yoke methodology Managers, Engineers or anyone who wishes to introduce 2 days
Improvement comparing to conventional detection method Poka Yoke in the workplace
2. To provide practical examples of actual application in industry
3. To identify steps for implementing Poka Yoke system successfully
QP7 5S Management 1. To understand the 5S concept Managers, Engineers or anyone who wishes to introduce 2 days
2. To provide practical examples of actual application in industry 5S in the workplace
3. To identify steps for implementing 5S system successfully
QP8 Kaizen 1. To understand the Kaizen concept Managers, Engineers or anyone who wishes to introduce 2 days
2. To provide practical examples of actual application in industry Kaizen in the workplace
3. To identify steps for implementing Kaizen system successfully
Management Programs
MP1 Practical Cost Reduction Program 1. To identify and reduce wastage, inefficiencies, rejects and reworks in Managers, Engineers or anyone who wishes to introduce 2 days
organization Cost Reduction program in organization
2. To continuously improve the process thus enable the organization to
be more efficient and competitive
3. Able to establish practical monitoring for tracking purpose
MP2 Project Management 1. To understand the key activities of Project Management Planner and Project Manager who wants to be equipped with 2 days
2. To identify and define the activity, event, critical path, PERT/cost an understanding of the Project Management
3. To implement the Project Management through CPM, PERT
MP3 Effective QA/QC Skills 1. To understand the meaning of quality and correct approach in Production floor staff which are Operators, Team Leaders 2 days
production control and Supervisors of QA/QC who wishes to enhance the use
2. To understand the roles and responsibilities of each QA/QC staff of QA/QC Skills
* For In House Training, to be accomodated with customer preference date
For other training not listed above, please contact us for a proposal.Page 10 of 13
For In House Training's investment fee or further enquiries, please do not hesitate to contact:
Khairil Anwar Razali
QES Management Consultants Sdn Bhd (1115356-X)
No 16-02, Jalan Setia Tropika 1/18, Taman Setia Tropika, 81200 Johor Bahru, Johor.
Tel: 07 244 7309, Fax: 07 244 7308, Email: [email protected]
FGV approved vendor Cert # B-01071400032-02
Kementerian Kewangan Malaysia Cert # K22162245431471551
Page 11 of 13