Qasair Installation Instructions 2015

INSTALLATION & USER INSTRUCTIONS

Qasair Rangehoods Installation Instructions2

Qasair Rangehoods Installation Instructions 3

Standard Warranty

Important Information

Instructions for Models MT / MC / FA / CON / NDCH / LIS / ETN / ECH / WCV

Instructions for Models EAS / WES

Instructions for Models H Series & PYR

Instructions for Models3F / ST / SEA / SMF / CM / STA / STAR / IN

Instructions for ModelsTR CT

Instructions for ModelsBRH / LAM / BAR / MAR / MAJ / FAS

Instructions for Models4F / PRE / MA / SQ 420 / MOL / HAM / FPR / BUR / BEL / D 400 / D 500 / SEN

Installation Ideas

Rangehood Cleaning, Filter Cleaning

Ducting Pieces

Appliance Guarantee

Guarantee Exclusions

8

4

28

33

37

54

56

67

101

96

84

102

103

104


CONDARI PTY LTD makes over 120 different models of QASAIR Rangehoods plusmany special rangehoods designed by architects and interior designers.

It is important to follow the installation instructions.

There are many different cooking appliances on the Australian market today. Examples: Electric Ego, ceramic hotplates, teppanyaki plates and Induction hotplates. There are gas hotplates with four burners, a wok burner or fish burner of all different heat output. Many companies offer a vario system with individual two gas burners, a wok burner, electric ceramic hotplate, an electric griller or barbecue and an induction hotplate. There are three gas cooking appliances with an open flame griller or barbecue.

Gas regulations require different heights for different brands of rangehoods. QASAIR rangehoods can be fitted 600 mm above the trivet of a gas hotplate. This is due to the fact they do not have plastic motors or plastic internal parts. Over the open flame gas grillers or gas barbecues the filters must be 1200 mm above the cooking surface. Therefore, a special rangehood is required to comply with the regulations. There are no regulations over an electric hotplate except for those set out by the manufacturer. Above a gas wok burner or electric griller or barbecue they should be 700 mm to 800 mm above. All decorative rangehoods in the Sapphire, Gallery, Imperial, Argyle, Federation and Heritage range should be 700 mm to 800 mm above the cooking surface. When a rangehood is in a galley or partially enclosed kitchen, the rangehood can be higher at 900 mm to 1000 mm.

For island situations they should not be above 800 mm as movement around the bench will result in fumes being drawn out from the catchment area of the rangehood.We have a model, the Thermidor which is installed in the ceiling and is higher than the recommendation. This is for aesthetic reasons such as a view or window setting. The rangehood is fitted with three fans to provide the necessary air movement. The Executive Range can be installed at 600mm above the trivets of a gas hotplate, over an induction cooktop the minimum should be 750mm.

1. The installation of QASAIR Rangehoods must comply with the information in this booklet. QASAIR Rangehoods are designed and made to work efficiently over all domestic cookware available on the Australian market.

2. Every QASAIR Rangehood must be ducted to the outside atmosphere by the use of zinc-alume duct or non-porous and non-flammable materials. Do not use of any type of flexible ducting or plastic PVC piping. Rangehoods must not be vented into a wall cavity or a ceiling space. Externally ducting the rangehood prevents a build up of grease, which can be a fire risk. Ensure the external outlet vent does not restrict the airflow in any way, as this may result in reduced performance.

3. QASAIR Rangehoods must be ducted in duct work equivalent to the outlet of the rangehood ie: The cross sectional area of the rangehood outlet and the duct work must be equal. Do not reduce the duct size or have sharp bends. Enlarge the duct size if the duct is to run 6 metres or longer. Advice from CONDARI is available to ensure optimum performance. Always use nonflammable materials to minimise the risk of fire in the duct.

4. Ensure all ducting pieces are correctly fitted and sealed with either duct tape or silicone to ensure that fumes do not escape into the ceiling space and seep into living areas through vents or light fittings. The installation

IMPORTANT INFORMATION


and fitting of the rangehood should be done in such a way that will allow the unit to be removed if service is required. Additional costs incurred in the removal of wall tiles, damage to walls or bench tops are not covered by warranty.

5. Always adequately ventilate the room when the rangehood is in use at the same time as appliances burning gas or other fuels.

6. WARNING: Incorrect venting will result in additional noise and a reduction in efficiency. Exhaust air must not be discharged into any chimney or flue, which may carry combustible products from other sources. a) Do not discharge the air-flow from the rangehood into a flue used for exhausting fumes from burning gas or fuel; b) For cleaning purposes please refer to page 101 of installation instructions for stainless steel; c) If cleaning is not carried out in accordance with the instructions as listed on page 101, there may be an increased risk of fire; d) Some parts of the rangehood may become hot when cooking; e) This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

7. Do not flambé under the rangehood.8. If the supply cord is damaged, an authorised service centre or licensed electrician must replace it.9. NOTE: CONDARI recommend an air movement of between 1000 to 1400 cubic metres per hour over an indoor

barbecue, depending on the length of the duct run. Ensure a twin motor unit is installed over indoor barbecues for optimum results. Barbecues should be positioned under the centre of the hood where the fans are mounted and not near the outer edges where leakage may occur.

10. The lights in the rangehoods are LED and come with a night light except for D400L-1 and SEN400L-1. 11. To reduce the risk of fixing screws coming in contact with live parts, do not drill or screw into the rangehood.

Live wires are encapsulated where possible to prevent user contact. If necessary drill from the inside out and only through single sheet material.

12. QASAIR domestic rangehoods are not to be used over barbecues approved for outdoor use only, with a Mega Joule rating of 50mj and over.

13. CONDARI make a range of hoods specifically for outdoor barbecues in alfresco areas under the CONDOR name.

14. CONDARI can manufacture rangehoods to be used over commercial cookers in domestic applications.


INSTALLATION INSTRUCTIONS - EXECUTIVE RANGE

CUTOUT DIMENSIONS

MODEL HOOD SIZE BASE SIZE CUT OUT DIMENSION

CON 60L 243 x 580 280 x 600 258 x 585

CON 80L 243 x 780 280 x 800 258 x 785

NDCH 90L 243 x 880 280 x 900 258 x 885

NDCH 100L 243 x 980 280 x 1000 258 x 985

NDCH 120L 243 x 1180 280 x 1200 258 x 1185

LIS 500L 390 x 480 430 x 500 400 x 485

LIS 800L 390 x 780 430 x 800 400 x 785

LIS 900L 390 x 870 430 x 900 400 x 885

LIS 1000L 390 x 980 430 x 1000 400 x 985

LIS 1200L 390 x 1180 430 x 1200 400 x 1185

LIS 1500L 390 x 1480 430 x 1500 400 x 1485

WES 60L / EAS 60L 290 x 565 330 x 600 300 x 570

WES 80L / EAS 80L 290 x 780 330 x 800 300 x 785

WES 90L / EAS 90L 290 x 880 330 x 900 300 x 885

WES 100L / EAS 100L 290 x 980 330 x 1000 300 x 985

WCV 1000L 560 x 980 600 x 1000 570 x 985

WCV 1300L 560 x 1280 600 x 1300 570 x 1285

WCV 1600L 560 x 1580 600 x 1600 570 x 1585

WCV 1800L 560 x 1780 600 x 1800 570 x 1785

ECH 600L / ETN 600L 340 x 580 380 x 600 355 x 585

ECH 800L 340 x 780 380 x 800 355 x 785

ECH 900L / ETN 900L 340 x 880 380 x 900 355 x 885

ECH 1000L 340 x 980 380 x 1000 355 x 985

ECH 1200L 340 x 1180 380 x 1200 355 x 1185


DUCT DIRECTION CHANGE INSTRUCTIONSBefore installing your rangehood check whether it has the fan mounted for back or top ducting.For top ducting, the unit will have the air outlet at the top, and for back ducting, the unit will have the air outlet at the back.

To change from top to back or back to top, proceed as follows:

Duct direction for ECH, ETN, NDCH and CON modelsThe motor shown is fitted to the back plate (P) and this plate is attached to the hood by screws (S). To change from top to back, remove the filters, unplug fan(s). Undo all the screw (S), carefully remove the plate and turn it around so the motor points out the way required. Fit and reconnect the fan(s), and fit all the screws again and tighten.

Duct direction for LIS / FA / MT / MC / EAS and WES

To change the duct direction, proceed as follows:1. Remove the screws from the fan access panel and remove access panel (for MT and MC models only).2. Disconnect fan(s).3. Unscrew the 2 x 7mm screws (B) fixing the fan to the hood. Remove fan entirely. Repeat for each fan.4. Rotate the fan assembly and re-install so that the air outlet meets with the rangehood outlet hole through which

you are going to vent (top or back).5. Replace the 2 x 7mm screws holding each fan.6. Reconnect the fan(s)7. Refit the fan access panel (for MT, EAS and WES models only).

LIS model – Rear duct


INSTALLATION INSTRUCTIONS • MT • MC

1. Fit a shelf at 410mm from the base of the cupboard.2. Note hinge location prior to drilling.3. Work from the centre line mark and drill 4 x M5 to M8 holes.4. For top ducted models, cut out hole for the ducting allow 20mm clearance.5. Fix left and right hand mounting brackets (supplied) 145mm from the base of the cupboard flush with the rear of the unit. Notch to the back.6. Lift rangehood onto mounting brackets by holding either end. DO NOT use the slide mechanism as this may

cause damage.7. Insert the 4 x 50mm pan head screws supplied through the shelf and into the rangehood. Turn clockwise to level

the rangehood.8. Fix the rangehood position by inserting 2 x no 8 1/2 inch screws through the left and right hand brackets.9. Fit doors.10. Minor adjustments may be required on the rangehood handle. Loosen the screws on the rear of the handle and

adjust handle position and re- tighten. The rangehood handle can be replaced.11. All of the rangehoods shown on pages 1 and 8 are supplied with a 10AMP plug and lead for connection to a 10AMP GPO, which must be in an accessible position.12. The handle can be removed and replaced with one made by the cabinet maker to fit in with the kitchen cabinets.

The MT 90 has 3 screws and the MT 60 has 2 screws. These can be accessed by sliding the facia out and un-screwing the front from underneath and behind the facia. The handle will come off by tilting it forward from

the top.

Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.


Mini TrimTechnical Specification Sheet

MT Slide Out

Motor Box /Flue Width

Body Width

Light Centres

LED Light

Light Qty

Motor Qty

Filter Qty 1

N/A

Model Model MT 60L-1

2

320mm

Nightlight

N/A

Minimum Height(H =)

Page 1 of 1Condari Pty Ltd.

All-thread Fixing Centres

PowderKote Available

Maximum Height(H =)

Corner Type

ConversionTop/Back Back/Top

Electrical Connection

YES

N/A

10 Amp Lead

N/A

Square

N/A

Version: B 03/12/2014F

N/A

514mm x 177mm

2

MT 90L-1

1

Cool

YES

MT 60L-1

600mm

518mm

1 10 Amp Lead

YES

407mm x 177mm

MT 90L-1

N/A

Square

Cool

YES

518mm

900mm

1

Filter Size

N/A

N/A

Power entry locationis the same for all

MT models.

20

38

275 170

120

395

255

20110

20

110

This view is shownwith slide out trimin closed position.

MINI TRIM - MT



Condari Pty Ltd. Page 1 of 1Version: B 03/12/2014F

Body Width

Model

Motor Qty

Light Centres

Light Qty

Nightlight

LED Light

Filter Qty

Model

Filter SizeConversionTop/Back Back/Top

Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type

MC 1000L-2MC 1000L-2

1000mm

918mm

2

Cool

YES

2

320mm

2

457mm x 177mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

MarcelTechnical Specification Sheet

MC Slide Out

Power Entry

170275

455

179100

20

255

20110

20

110

This view is shownwith slide out trim in closed position.

MARCEL - MC


INSTALLATION INSTRUCTIONS • FA

1. The rangehood is designed to be fitted within joinery and can be installed by inserting screws in the three holes provided on each side, or to the top or back by drilling your own mounting holes as required.

2. When installed, cover the access holes to the side fixing screws with the plastic plugs supplied.3. Fit filters.4. Install front panel to suit as per your kitchen design.



Door Width


Body Width

Model

Motor Qty

Light Centres

Light Qty

Nightlight

LED Light

Filter Qty

Model



FA 60L-1 FA 90L-2FA 90L-1FA 60L-1FA 90L-2FA 90L-1

598mm

Centre

2

573.4mm

1

Cool

YES

1

274mm x 290mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

898mm

873.4mm

1

Cool

YES

2

350mm

2

898mm

873.4mm

2

Cool

YES

2

350mm

2

424mm x 290mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

424mm x 290mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

FoldawayTechnical Specification Sheet

FA Undercupboard

Power Entry

300

450

20

110

200

4 4 4

20110

Power Entry

This view is shownwith door in closedposition.

10

FOLDAWAY - FA


INSTALLATION INSTRUCTIONS • CON • NDCH • LIS • ECH • ETN

1. Loosen screws A and B by turning anti-clockwise.2. Turn screw ‘D’ anti-clockwise to extend the outer spring bracket.3. Insert rangehood into cut out and turn screw ‘C’ clockwise to align rangehood with cupboard base.4. Do not over tighten.5. Tighten screw ‘A’ by turning clockwise to lock fixing bracket.6. Fit off ductwork as required.7. To remove rangehood, turn screw ‘D’ clockwise.

Models: ETN ECH NDCH

Models: LIS CON

RANGEHOOD SPRING BRACKETS


1

1

2

2

3

3

4

4

5

5

6

6

A A

B B

C C

D D

Cupboard Front of Rangehood



Condari Pty Ltd. Page 1 of 1Version: A 01/07/2014F

Body Width

Model

Motor Qty

Light Centres

Light Qty

Nightlight

LED Light

Filter Qty

Model



CON 60L-1 CON 80L-2CON 80L-1CON 60L-1CON 80L-2CON 80L-1

600mm

Centre

2

580mm

1

Cool

YES

1

269mm x 250mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

800mm

780mm

1

Cool

YES

2

379mm

2

800mm

780mm

2

Cool

YES

2

379mm

2

379mm x 157mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

379mm x 157mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

ConleyTechnical Specification Sheet

CON Undercupboard

Power Entry

280

360

12

10110

10

110

Power Entry

240

CONLEY - CON


UndermountTechnical Specification Sheet

NDCH Undercupboard

Motor Qty

LED Light

Nightlight

Model

Body Width


Light Qty

Light Centres

Filter Qty

Cool

YES

1

880mm

900mm

NDCH 90L-1

2

Page 1 of 2


Condari Pty Ltd.


2

770mm

NDCH 90L-2

2

770mm

880mm

Minimum Height(H =)

Model

Maximum Height(H =)

Corner Type Square

N/AN/A


Square


N/A

N/A

340mm x 260mm

YES

NDCH 90L-1 NDCH 90L-2

Cool

YES

900mm

2

2

10 Amp Lead

YES

340mm x 260mm

10 Amp Lead

N/A


N/A

N/A

N/A

Power entry locationis the same for allNDCH models.

280

12

360

10

110

240

10110

UNDERMOUNT - NDCH


UndermountTechnical Specification Sheet

NDCH Undercupboard

2

Light Centres

Filter Qty

860mm


Body Width

Motor Qty

Nightlight

Light Qty

LED Light

1060mm

Cool

NDCH 120L-2

1180mm

YES

2

NDCH 100L-2

Cool

980mm

Model

2


Page 2 of 2Version: B 19/12/2014FCondari Pty Ltd.

2 Corner Type

Maximum Height(H =)

2

1000mm 1200mm Filter Size

Electrical ConnectionMinimum Height(H =)

Square

N/A

N/A N/A

Square

Model

PowderKote Available N/A

N/A

10 Amp Lead

N/A

N/A

YES

479mm x 260mm

N/A

NDCH 100L-2

YES

NDCH 120L-2

10 Amp Lead

379mm x 260mm

YES

2


Power entry location is the same for allNDCH models.

280

12

360

10110

240

10

110

UNDERMOUNT - NDCH




Body Width

Model

Motor Qty

Light Centres

Light Qty

Nightlight

LED Light

Filter Qty

Model



LIS 500L-1 LIS 800L-2LIS 800L-1LIS 500L-1LIS 800L-2LIS 800L-1

500mm

Centre

1

480mm

1

Cool

YES

1

459mm x 290mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

800mm

780mm

1

Cool

YES

2

380mm

2

800mm

780mm

2

Cool

YES

2

380mm

2

379mm x 290mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

379mm x 290mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

LismoreTechnical Specification Sheet

LIS Undercupboard


LIS models.

430

20 20

400

20

110

315

20110

75

390

12 150

LISMORE - LIS



LIS Undercupboard


Body Width

Light Centres

LED Light

Light Qty

Motor Qty

Filter Qty 2

424mm

Model Model LIS 900L-2

2

480mm

Nightlight

N/A

Minimum Height(H =)




Maximum Height(H =)

Corner Type



YES

N/A

10 Amp Lead

N/A

Square

N/A


N/A

424mm x 290mm

2

LIS 1000L-2

2

Cool

YES

LIS 900L-2

900mm

870mm

2 10 Amp Lead

YES

479mm x 290mm

LIS 1000L-2

N/A

Square

Cool

YES

980mm

1000mm

2

Filter Size

N/A

N/A


LIS models.

430

20 20

400

20

110

20110

315

390

7512 150

LISMORE - LIS


Minimum Height(H =)

Filter Size

Model


N/A

LIS 1200L-3


Page 3 of 3

Body Width

Motor Box /Flue WidthMotor Qty

Model

Nightlight

Filter Qty

Light Qty


Light Centres

Maximum Height(H =)

Corner Type

Condari Pty Ltd.

1180mm

1200mm

LIS 1200L-2

4

LED Light

580mm

YES

N/A

N/A

10 Amp Lead

290mm x 290mm

LIS 1200L-2

N/A

LIS 1500L-3

N/A

YESYES

2

N/A

290mm x 290mm 365mm

x 290mm



LIS 1500L-3

1500mm

1480mm

3

3

1200mm

1180mm

452mm

4

YES

4

Cool Cool

32

LIS 1200L-3

N/A

Square

YES

10 Amp Lead10 Amp Lead

YES

N/A

Square

N/A

N/A

N/A

Square

N/A

580mm

2

Cool


LIS Undercupboard


LIS models.

430

20 20

400

20

110

20110

315

7512

390

150

LISMORE - LIS


EatonTechnical Specification Sheet

ETN Undercupboard

N/A

10 Amp Lead

N/A

N/A

N/A

379mm x 290mm

YES

N/A




Filter Size

Maximum Height(H =)YES

Cool

880mm

21

2

N/A

900mm

ETN 900L-2

379mm x 290mm

YES

10 Amp Lead

YES

900mm

Cool

2

880mm

10 Amp Lead

N/A

N/A

479mm x 290mm

ETN 900L-1

YES

N/A

ETN 600L-1 ETN 900L-2Model

2

YES

Cool

ETN 900L-1ETN 600L-1

1

580mm

600mm

Square

N/A

Square


N/A

Square

N/A

2

800mm520mm

1 2

800mm

Corner Type


Condari Pty Ltd. Page 1 of 1


Filter Qty

Light Centres

LED Light

Motor Qty

Light Qty

Nightlight

Body Width

Model

380

12

290

340

10110

10

110

Power entry locationis the same for all ECH models.

EATON - ETN


ECH Undercupboard

ECHTechnical Specification Sheet


Condari Pty Ltd. Page 1 of 3Version: A 10/04/2014

Body Width

Model

Motor Qty

Light Centres

Light Qty

Nightlight

LED Light

Filter Qty

Model



ECH 600L-1 ECH 800L-2ECH 800L-1ECH 600L-1ECH 800L-2ECH 800L-1

600mm

521mm

1

580mm

1

Cool

YES

2

479mm x 290mm

YES

10 Amp Lead

N/A

N/A

N/A

Square

800mm

780mm

1

Cool

YES

2

721mm

2

800mm

780mm

2

Cool

YES

2

721mm

2

340mm x 290mm

YES

10 Amp Lead

N/A

N/A

N/A

Square

340mm x 290mm

YES

10 Amp Lead

N/A

N/A

N/A

Square

N/A N/A N/A

Power entry location is the same for allECH models.

380

290

340

10110

12

10

110

ECH


Motor Qty

LED Light

Nightlight

Model

Body Width


Light Qty

Light Centres

Filter Qty

Cool

YES

1

880mm

900mm

ECH 900L-1

2

Page 2 of 3


Condari Pty Ltd.


2

800mm

ECH 900L-2

2

800mm

880mm

Minimum Height(H =)

Model

Maximum Height(H =)

Corner Type Square

N/AN/A

Version: A 10/04/2014

Square


N/A

N/A

379mm x 290mm

YES

ECH 900L-1 ECH 900L-2

Cool

YES

900mm

2

2

10 Amp Lead

YES

379mm x 290mm

10 Amp Lead

N/A


N/A

N/A

N/A


ECH Undercupboard

380

12

290

340

10110

10

110

Power entry locationis the same for all ECH models.

ECH

Qasair Rangehoods Installation Instructions 23Version: A 10/04/2014 Page 3 of 3

Square

N/A

Corner Type

Light Centres

Light Qty


Condari Pty Ltd.


290mm x 290mm

ECH 1000L-2

Filter Qty


N/A

YES

N/A

ECH 1200L-2Model

Filter Size


Maximum Height(H =)


Body Width

Model

Motor Qty

Nightlight

LED Light

YES

340mm x 290mm

10 Amp Lead

N/A

N/A

10 Amp Lead

N/A

N/A

N/A

Square

2

1180mm

1200mm

ECH 1200L-2

1061mm

3

911mm

2

Cool

YES

2

980mm

3

2

Cool

1000mm

ECH 1000L-2

YES

ECH 1200L-3 ECH 1200L-3

1200mm

1180mm

3

Cool

YES

2

1061mm

3

340mm x 290mm

YES

10 Amp Lead

N/A

N/A

N/A

N/A

Square

ECH


Undercupboard

380

290

340

10110

10

11012

Power entry location is the same for allECH models.

ECH


INSTALLATION INSTRUCTIONS • WCV

All the rangehoods are supplied as Top ducted and can be Side or Back ducted through separate ducting pieces.Side ducting can be either Left or Right.

When being installed over a gas cooker with an open flame griller the filters must be 1200 mm above the cooking

surface. In these cases, it may be necessary to have remote switching as the switches on the rangehood may be out of reach.

Please refer to Gas Installation Code AG 601 – 2002.

1. Unplug power cable ‘A’ and fan cables.2. Remove screws ‘B’ and remove inner section of rangehood.3. Loosen screws ‘C’ & ‘D’ by turning anti-clockwise.4. Turn screw ‘F’ anti-clockwise to extend the spring bracket.5. Insert outer shell of rangehood into cutout and turn screw ‘E’ clockwise to align rangehood with cupboard base. Be

sure that the spring bracket has engaged with the cabinet panel before tightening ‘E’.6. Do not over tighten.7. Tighten screw ‘C’ by turning clockwise to lock fixing bracket.8. Refit inner section of rangehood with screws ‘B’.9. Plug power cable ‘A’ into it’s socket and in in fan cables.10. Fit off ductwork as required.11. To remove rangehood repeat points 1 & 2 loosen screw ‘C’, turn screw ‘F’ clockwise.

Installation Instructions WCV1000L-2 WCV1300L-3WCV1600L-3 WCV1800L-3

Cutout Dimensions -WCV1000L-2 985 x 568WCV1300L-3 1285 x 568WCV1600L-3 1585 x 568WCV1800L-3 1785 x 568

A

B

C

D

E

1. Unplug power cable A and fan cables.2. Remove screws B and remove inner section of rangehood.3. Loosen screws C & D by turning anti-clockwise.4. Insert outer shell of rangehood into cutout and turn screw E clockwise to align rangehood with cupboard base.5. Do not over tighten this screw.6. Tighten screw C by turning clockwise to lock fixing bracket.7. Refit inner section of rangehood with screws B.8. Plug power cable A into it's socket and plug in fan cables.9. Fit off duct work as required.10. To remove rangehood repeat points 1 & 2, loosen screw C, turn screw F clockwise.

F

Installation Instructions WCV1000L-2 WCV1300L-3WCV1600L-3 WCV1800L-3

Cutout Dimensions -WCV1000L-2 985 x 568WCV1300L-3 1285 x 568WCV1600L-3 1585 x 568WCV1800L-3 1785 x 568

A

B

C

D

E

1. Unplug power cable A and fan cables.2. Remove screws B and remove inner section of rangehood.3. Loosen screws C & D by turning anti-clockwise.4. Insert outer shell of rangehood into cutout and turn screw E clockwise to align rangehood with cupboard base.5. Do not over tighten this screw.6. Tighten screw C by turning clockwise to lock fixing bracket.7. Refit inner section of rangehood with screws B.8. Plug power cable A into it's socket and plug in fan cables.9. Fit off duct work as required.10. To remove rangehood repeat points 1 & 2, loosen screw C, turn screw F clockwise.

F


1

1

2

2

3

3

4

4

5

5

6

6

A A

B B

C C

D D



COBARTechnical Specification Sheet

WCV Undercupboard

Body Width

LED Light

Motor Qty

Model

Light Qty

Light Centres

Filter Qty

YES

4

580mm

Cool

WCV 1000L-2

1000mm

2

Nightlight

3


Maximum Height(H =)

Version: A 13/11/2014F

N/A

Square

Condari Pty Ltd.

All-thread Fixing CentresCorner Type

580mm

4

YES

Cool

3


10 Amp Lead

WCV 1000L-2

290mm x 422mm

N/A N/A

Page 1 of 3

4

980mm

Square

N/A

N/A

YES

290mm x 422mm

N/A


Model WCV 1300L-3

YES

10 Amp Lead

1300mm

1280mm

WCV 1300L-3

Minimum Height(H =)

Filter SizeTop DuctedConversion: Back , Side

N/A

N/A


Cobar models.

600

28012

500

20

30 110340

560

COBAR - WCV


272mm x 422mm

YES

10 Amp Lead

YES

WCV 1800L-3

4

3

YES

816mm

WCV 1800L-3

1780mm

1800mm

1580mmMotor Box /Flue Width

Cool


Condari Pty Ltd.

N/A

N/A N/A

N/A

N/A

Square


N/AMinimum Height(H =)

Top DuctedConversion: Back , Side


Filter Size

Model

Corner Type

N/A

6

Maximum Height(H =)

Page 2 of 3

Square

N/A

290mm x 422mm

WCV 1600L-3


10 Amp Lead

YES

4

1600mm

WCV 1600L-3

Filter Qty

Light Centres

Light Qty

Nightlight

LED Light

Motor Qty

Body Width

3

Cool

5

872mm

Model

Undercupboard


WCV


Cobar models.

560

34011030

20

500

12 280

600

COBAR - WCV


WCV B2

WCV S2

WCV B3

WCV S3

WCV S3T


UndercupboardWCV

Version: A 13/11/2014F Page 3 of 3Condari Pty Ltd.Ducted Pieces

BACK DUCTED PIECES

SIDE DUCTED PIECES

110

150

138

110

24

25

15

COBAR - WCV


INSTALLATION INSTRUCTIONS • WES • EAS

1. Loosen screws A and B by turning anti-clockwise.2. Turn ‘D’ anti-clockwise to extend the outer spring bracket.3. Insert rangehood into cut out and turn screw ‘C’ clockwise to align rangehood with cupboard base.4. Do not over tighten.5. Tighten screw ‘A’ by turning clockwise to lock fixing bracket.6. Fit off ductwork as required.7. To remove rangehood, turn screw ‘D’ clockwise.

Model: WES Model: EAS

WESTMOREEASTMORE

RANGEHOOD SPRING BRACKETS


1

1

2

2

3

3

4

4

5

5

6

6

A A

B B

C C

D D


A

B

C

B C

D

D

A


EastmoreTechnical Specification Sheet

EAS Undercupboard

Motor Qty

LED Light

Nightlight

Model

Body Width


Light Qty

Light Centres

Filter Qty

Cool

YES

1

565mm

600mm

EAS 60L-1

2

Page 1 of 2


Condari Pty Ltd.


2

380mm

EAS 80L-2

2

300mm

780mm

Minimum Height(H =)

Model

Maximum Height(H =)

Corner Type Square

N/AN/A


Square


N/A

N/A

272mm x 272mm

YES

EAS 60L-1 EAS 80L-2

Cool

YES

800mm

2

2

10 Amp Lead

YES

379mm x 260mm

10 Amp Lead

N/A


N/A

N/A

N/A


EAS models.

Motor AccessPanel

Motor AccessPanel

330

12

FILTER 330

11020

20 110290

FILTER225

570

EASTMORE - EAS


EastmoreTechnical Specification Sheet

EAS Undercupboard

Body Width

LED Light

Motor Qty

Model

Light Qty

Light Centres

Filter Qty

YES

2

430mm

Cool

EAS 90L-2

900mm

2

Nightlight

2


Maximum Height(H =)


N/A

Square

Condari Pty Ltd.


480mm

2

YES

Cool

2


10 Amp Lead

EAS 90L-2

429mm x 260mm

N/A N/A

Page 2 of 2

2

880mm

Square

N/A

N/A

YES

479mm x 260mm

N/A


Model EAS 100L-2

YES

10 Amp Lead

1000mm

980mm

EAS 100L-2

Minimum Height(H =)


N/A

N/A


EAS models.

Motor AccessPanel

Motor AccessPanel

330

12

110

20

20 110290

570

FILTER330 FILTER

225

EASTMORE - EAS


WestmoreTechnical Specification Sheet

WES Undercupboard

Motor Qty

LED Light

Nightlight

Model

Body Width


Light Qty

Light Centres

Filter Qty

Cool

YES

1

565mm

600mm

WES 60L-1

2

Page 1 of 2


Condari Pty Ltd.


2

380mm

WES 80L-2

2

300mm

780mm

Minimum Height(H =)

Model

Maximum Height(H =)

Corner Type Square

N/AN/A


Square


N/A

N/A

272mm x 272mm

YES

WES 60L-1 WES 80L-2

Cool

YES

800mm

2

2

10 Amp Lead

YES

379mm x 260mm

10 Amp Lead

N/A


N/A

N/A

N/A


WES models.

Motor AccessPanel

Motor AccessPanel

33012

FILTER145

450110

20

20 110290

FILTER60

WESTMORE - WES


WestmoreTechnical Specification Sheet

WES Undercupboard

Body Width

LED Light

Motor Qty

Model

Light Qty

Light Centres

Filter Qty

YES

2

430mm

Cool

WES 90L-2

900mm

2

Nightlight

2


Maximum Height(H =)


N/A

Square

Condari Pty Ltd.


480mm

2

YES

Cool

2


10 Amp Lead

WES 90L-2

429mm x 260mm

N/A N/A

Page 2 of 2

2

880mm

Square

N/A

N/A

YES

479mm x 260mm

N/A


Model WES 100L-2

YES

10 Amp Lead

1000mm

980mm

WES 100L-2

Minimum Height(H =)


N/A

N/A


WES models.

Motor AccessPanel

Motor AccessPanel

FILTER60

29011020

20

110450

FILTER145

12 330

WESTMORE - WES


INSTALLATION INSTRUCTIONS • H SERIES • PYR

1. Remove canopy and flue from boxes and check you have correct model and flue.2. Locate centre point of cooktop.3. Use level or plumb line to mark centre up to ceiling.4. Mark level line for base of canopy 700-800mm above bench 750mm desirable.5. Check roof space above for wires and obstructions as now is the time to decide on any changes to location due

to immovable obstructions.6. Mark flue size on ceiling and cut neat exact hole to pass flue through.7. For rear ducted models cut hole in wall for vent to pass through.8. Fix mounting bracket to wall at desired height.9. Remove fan(s) from canopy by removing side fixing bolts and disconnecting electrical plug at flexible connector.10. Locate solid fixing points on wall and drill holes in rear of canopy to suit. If no solid fixing is available then now is

the time to install fixing points. Four points are recommended with one on each side at top and one on each side at bottom.

11. Drill hole in rear of unit to pass power connection through where available on wall.12. Check flue slides through hole in ceiling.13. Place canopy flat on floor and fit stainless flue over spigot pushing all the way down for a neat fit. Drill hole in

rear of flue and fix to canopy with pop rivet or screw.14. Carefully lift canopy into position, guiding flue through ceiling and feeding power cable through hole in rear of

canopy. Make sure canopy is sitting correctly on mounting bracket then fix to wall through fixing holes with solid screws. (You may need to place a packer behind canopy if wall is bowed to make the canopy sit correctly).

15. Complete electrical connection to 10 AMP junction box to local electrical authority regulations ensuring power is turned off during work.

16. Fit ducting to outside or exterior wall vent for rear ducted models. (Seal rear vents onto rear of hood with silicone). A plumber should seal roof penetration with appropriate flashing. All joins in ducting need to be sealed with duct tape or silicone and only use approved ducting of the correct size for your canopy.

17. Fit motor(s) back into canopy with fixing bolts and plug electrical connector in.18. Test run hood.

MOUNTING BRACKET• Use vertically punched slot for centre line• Before cutting any holes check ceiling space for structural beams. It may be possible at this point to relocate the

hood position.

The fixing points are prepunched holes in the back of the hood and it may be necessary to drill through the back of the hood into the wall stud.

Recommended fixing points



HeritageTechnical Specification Sheet

H Wall Mounted

3

310mm

Power Entry Vertical

Light Centres

Light Qty

600mm

600HL-1

LED Light


Nightlight

2

Condari Pty Ltd.

Filter Qty 2

Motor Qty


150mm

Version: C 20/01/2015F

Body Width

Model 600HL-1

Page 1 of 2

Filter Size 272mm x 355mm

NO

700HL-1

Square Square

130mm

900HL-1

N/A

YES

125mmPower Entry Horizontal


Corner Type


YES

Outlet Spacing

900mm

240mm

Cool

11

700HL-1

Cool

510mm

22

310mm

YES

Junction Box

NO

Junction Box

135mm 210mm

NO

YES

Square

N/A N/A

272mm x 355mm290mm

x 355mm

150mm

Junction Box

Model900HL-1

YESYES

1

240mm

Cool

240mm

700mm

2

500

300

150

110

Available Lengths:

DLE

600mm

DLE

900mm

DLE

1200mm

DLE

1500mm

106

30

Minimum Height:

300mm

Maximum Height:

1800mm

HERITAGE - H


HeritageTechnical Specification Sheet

H Wall Mounted

YES

2

816mm

2

370mm

Cool

Model1500HL-2

1500mm1200mm

370mm

1200HL-2

YES

Cool

2

Power Entry Vertical

648mm

22

Cool

370mm

2

YES

5

Outlet Spacing

Model

Body Width


LED Light

4

1000HL-2

1000mm

510mm

3

Nightlight

Light Qty

Light Centres

Filter Qty

Junction Box

215mm

375mm

YES

272mm x 355mm 272mm

x 355mm

1500HL-2

NO

1200HL-2

YES

150mm

Square


Square

75mm

290mm x 355mm

1000HL-2

Junction Box

130mm

100mm

NO

Square

Page 2 of 2

Junction Box

NO

250mm

YES

190mm

100mm

Condari Pty Ltd.


Corner Type


Power Entry Horizontal


500

30

150

110375

Available Lengths:

DLE-2

600mm

DLE-2

900mm

DLE-2

1200mm

DLE-2

1500mm

150

Minimum Height:

375mm

Maximum Height:

1875mm

HERITAGE - H


PyramidTechnical Specification Sheet

PYR Wall Mounted


Filter Size

Model

Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing Centres

Page 1 of 1

Corner Type

N/A

Filter Qty 3

Motor Qty

Light Qty

Light Centres


Body Width

Model

Cool

YES

2

PYR 900L-1

1

900mm

270mm

510mm

LED Light

Nightlight

Condari Pty Ltd.

Junction Box

PYR 900L-1

Square


NO

N/A

N/A

N/A

272mm x 355mm

500

380

150

110

30

Power Entry

280

Available Lengths:

DLP

600mm

DLP

900mm

DLP

1200mm

DLP

1500mm

20 110

500

30

230

PYRAMID - PYR


INSTALLATION INSTRUCTIONS • 3F • ST • SEA • SMF • CM • STA / STAR / STF • IN (REMOTE SWITCHED)

1. Prepare wall by marking level line at desired height above cooktop.2. Plumb line from centre of cooktop to ceiling and mark flue cut out. 3. Mark level line for base of canopy 700-800mm above bench 750mm desirable. 4. Position mounting bracket on wall and fix with four screws. 5. Cut a neat hole through the ceiling and remove any obstructing timbers.6. Note: Various offsets are available from your QASAIR dealer to duct around any major structural beams which

cannot be removed. Ask your QASAIR dealer for advice.7. In the case of back ducted models, cut a hole in the wall at the desired height.8. Locate solid fixing point in wall to support hood. If there is no solid fixing point it will have to be placed in the wall

before proceeding. QASAIR recommend at least four (4) fixing points.9. Drill holes in back of unit at suitable fixing points.10. Drill 20mm hole in the rear of unit for 240 volt power cable as close as possible to junction box or use hole below

the junction box.11. Attach flue (if applicable), then carefully lift into position on level line. Ensure flue is pushed into position and

electrical cable is fed into rear of unit.12. Duct in approved manner to outside atmosphere.

Recommended fixing points



3 FlareTechnical Specification Sheet

3F Wall Mounted

3F 1200L-2

2

3

510mm

YESYES

2

1200mm

400mm

22

300mm

Cool

900mm

3F 900L-2

Cool

Light Centres

Filter Qty

Nightlight

Light Qty

LED Light

Motor Qty

Model

Body Width

Maximum Height(H =)

Corner Type

648mm

Condari Pty Ltd.

4




Page 1 of 2


Minimum Height(H =)

Model


480mm

NO

3F 900L-2

272mm x 355mm


YES

1680mm

Junction Box Junction Box

NO

1680mm

YES

480mm

Round

N/A

Round

N/A

272mm x 355mm

3F 1200L-2

Power Entry

Power Entry

A Transition is supplied to suit standard DL2 ducting. Flues made to order for back ducted models.

Ø15mm Radius

Ø15mm RadiusØ

510

80

90

250480

180

Available Lengths:

600mm900mm

1200mm

3 FLARE - 3F



3F Wall Mounted

Filter Qty

Nightlight

Light Qty

Light Centres

Motor Qty

LED Light


Model

Body Width

4

816mm

5


Condari Pty Ltd.

Maximum Height(H =)


Minimum Height(H =)

Corner Type

3F 1500L-3 Model

648mm


PowderKote Available YES

Round

N/A

Version: C 20/01/2015F Page 2 of 2

N/A

YES

450mm

3

1200mm

3F 1200L-3 3F 1200L-3

NO

Junction Box

272mm x 355mm

480mm

1680mm 1680mm

3F 1500L-3

Round

Junction Box

Filter Size

3

2

Cool

272mm x 355mm

NO500mm

Cool

1500mm

2

YES

480mm

YES

Power Entry

Power Entry

Ø15mm Radius

Ø15mm Radius

A Transition is supplied to suit standard DL3 ducting. Flues made

to

order

for

back

ducted

models.

510

80

90

250480

Available Lengths:

600mm900mm

1200mm

230

3 FLARE - 3F



Condari Pty Ltd. Page 1 of 1Version: C 20/01/2015F

Body Width

Model

Motor Qty

Light Centres

Light Qty

Nightlight

LED Light

Filter Qty

Model



ST 900L-1 ST 1200L-2ST 900L-2ST 900L-1ST 1200L-2ST 900L-2

900mm

510mm

3

400mm

1

Cool

YES

2

272mm x 355mm

NO

Junction BoxBack Ducted 350mmTop Ducted 450mm

1530mm

YES

N/A

Round

900mm

400mm

2

Cool

YES

2

510mm

3

1200mm

400mm

2

Cool

YES

2

648mm

4

272mm x 355mm

NO


1530mm

YES

N/A

Round

272mm x 355mm

NO


1530mm

YES

N/A

Round

StepTechnical Specification Sheet

ST Wall Mounted


Step models.

9mm S-S rail.

510

120

350

H

200 140

Ø15mm Radius

Ø15mm Radius

STEP - ST




Body Width

Model

Motor Qty

Light Centres

Light Qty

Nightlight

LED Light

Filter Qty

Model



SEA 600L-1 SEA 900L-2SEA 900L-1SEA 600L-1SEA 900L-2SEA 900L-1

600mm

Centre

2

N/A

1

Cool

YES

1

272mm x 272mm

NO

Junction Box

400mm

1450mm

YES

400mm

Square

900mm

N/A

1

Cool

YES

2

510mm

3

900mm

N/A

2

Cool

YES

2

510mm

3

272mm x 272mm

NO

Junction Box

400mm

1450mm

YES

700mm

Square

272mm x 272mm

NO

Junction Box

400mm

1450mm

YES

700mm

Square

SenatorTechnical Specification Sheet

SEA Wall Mounted


Senator models.

H

400

310

All-Thread rods

are

supplied

for

extra

support.

SENATOR - SEA


1300mm

Square

1300mm

Square

YES

400mm

Junction Box

NO NO

1450mm

Junction Box

Square


1000mmAll-thread Fixing Centres

3

Cool

1500mm

N/A

Maximum Height(H =)

22

816mm

5

816mm

5

Cool

YES YES

N/A

1500mm

Cool

2

SEA 1500L-2 SEA 1500L-3

N/A

2

YES

2

Junction Box

NO

SEA 1200L-2

272mm x 272mm

YES

400mm

272mm x 272mm 272mm

x 272mm

1450mm

Model


400mm

YES

1450mm

SEA 1500L-3

Corner Type


SEA 1500L-2

Condari Pty Ltd.

Filter Size

648mm

4

1200mm

LED Light

Filter Qty

SEA 1200L-2


Light Centres

Light Qty

Nightlight

Model

Body Width


SenatorTechnical Specification Sheet

SEA Wall Mounted


Senator models.

400

310

H

All-Thread rods

are

supplied

for

extra

support.

SENATOR - SEA




Body Width

Model

Motor Qty

Light Centres

Light Qty

Nightlight

LED Light

Filter Qty

Model



SMF 600L-1 SMF 900L-2SMF 900L-1SMF 600L-1SMF 900L-2SMF 900L-1

600mm

310mm

2

450mm

1

Cool

YES

2

272mm x 355mm

YES

Junction Box

N/A

N/A

YES

N/A

Round

900mm

750mm

1

Cool

YES

2

510mm

3

900mm

750mm

2

Cool

YES

2

510mm

3

272mm x 355mm

YES

Junction Box

N/A

N/A

YES

N/A

Round

272mm x 355mm

YES

Junction Box

N/A

N/A

YES

N/A

Round

MaitlandTechnical Specification Sheet

SMF Wall Mounted


SMF models.

510

150

11020

450

20110

280

Ø15mm Radius

Ø15mm Radius

MAITLAND - SMF



SMF Wall Mounted

Model


Minimum Height(H =)


Filter SizeBody Width


Model

Maximum Height(H =)

SMF 1000L-2

290mm x 355mm

N/A



648mm

4

Condari Pty Ltd.

Round

N/A

N/A

Round

YES

Motor Qty

Page 2 of 4

N/A

YES

Nightlight

Light Qty

850mm

1000mm

SMF 1000L-2

510mm

3

LED Light

Light Centres

Filter Qty

Junction Box

YES

SMF 1200L-2

2

SMF 1200L-2

2

YES

2

Cool

2

N/ACool

YES

1050mm

1200mm 272mm x 355mm

YES

Junction Box

N/A


280110

20

450

20110

150

510


SMF models.

Ø15mm Radius

Ø15mm Radius

MAITLAND - SMF


Minimum Height(H =)

Filter Size

Model


N/A

SMF 1500L-3


Page 3 of 4

Body Width


Model

Nightlight

Filter Qty

Light Qty


Light Centres

Maximum Height(H =)

Corner Type

Condari Pty Ltd.

1350mm

1500mm

SMF 1500L-2

5

LED Light

816mm

YES

N/A

YES

Junction Box

272mm x 355mm

SMF 1500L-2

N/A

SMF 1800L-3

YES

YESYES

2

N/A

272mm x 355mm 290mm

x 355mm



SMF 1800L-3

1800mm

1650mm

4

3

1500mm

1350mm

422mm

6

YES

5

Cool Cool

32

SMF 1500L-3

N/A

Round

YES

Junction BoxJunction Box

YES

N/A

Round

N/A

YES

N/A

Round

N/A

816mm

2

Cool


SMF Wall Mounted

280110

20

450

20110

150

510


SMF models.

Ø15mm Radius

Ø15mm Radius

MAITLAND - SMF


Wall Mounted


SMF

SMF 600L-1 SHROUD

YES YES

SMF 900L-2 SHROUD

1450mm1450mm

SMF 1500L-3 SHROUD

300mm


SMF 1200L-2 SHROUD

Condari Pty Ltd.

Model

300mm300mm

1450mm

YES

Minimum Height(H =)Maximum Height(H =)

YESPowderkote Available

300mm

1450mm

SMF 900L-1 SHROUD

YES

SMF 1000L-2 SHROUD

YES

1450mm

300mm

YES

1450mm

300mm

YES

300mm

1450mm1450mm

300mm

SMF 1500L-2 SHROUD

SMF 1800L-3 SHROUD

SMF 600L-1

SHROUD

SMF 900L-1

SHROUD

SMF 900L-2

SHROUD

SMF 1000L-2

SHROUD

SMF 1200L-2

SHROUD

SMF 1500L-2

SHROUD

SMF 1500L-3

SHROUD

SMF 1800L-3

SHROUD

MAITLAND - SMF


CompactTechnical Specification Sheet

CM Wall Mounted

CM 900L-2

2

3

510mm

YESYES

2

900mm

750mm

21

450mm

Cool

900mm

CM 900L-1

Cool

Light Centres

Filter Qty

Nightlight

Light Qty

LED Light

Motor Qty

Model

Body Width

Maximum Height(H =)

Corner Type

510mm

Condari Pty Ltd.

3




Page 1 of 3


Minimum Height(H =)

Model


N/A

YES

CM 900L-1

272mm x 355mm


YES

N/A


YES

N/A

YES

N/A

Round

N/A

Round

N/A

272mm x 355mm

CM 900L-2

Power Entry

Ø15mm Radius

510

80

20110415

11020

280

Ø15mm Radius

Power Entry

COMPACT - CM



CM Wall Mounted

Filter Qty

Nightlight

Light Qty

Light Centres

Motor Qty

LED Light


Model

Body Width

3

648mm

4


Condari Pty Ltd.

Maximum Height(H =)


Minimum Height(H =)

Corner Type

CM 1200L-2 Model

510mm


PowderKote Available YES

Round

N/A


N/A

YES

850mm

2

1000mm

CM 1000L-2 CM 1000L-2

YES

Junction Box

290mm x 355mm

N/A

N/A N/A

CM 1200L-2

Round

Junction Box

Filter Size

2

2

Cool

272mm x 355mm

YES1050mm

Cool

1200mm

2

YES

N/A

YES

Ø15mm Radius

Ø15mm Radius

28020

110

415 11020

80

510

Power Entry

Power Entry

COMPACT - CM


Wall Mounted


CM

Condari Pty Ltd. Version: C 20/01/2015F Page 3 of 3

YESPowderkote Available YES

Maximum Height(H =)

Minimum Height(H =)

1450mm

335mm335mm

1450mm

Model CM 1000L-2 SHROUD

1450mm

YES

335mm

CM 900L-2 SHROUD

335mm

CM 1200L-2 SHROUD

1450mm

YES

CM 900L-1 SHROUD

CM 900L-1

SHROUD

CM 900L-2

SHROUD

CM 1000L-2

SHROUD

CM 1200L-2

SHROUD

COMPACT - CM


StatesmanTechnical Specification Sheet

STA / STAR Wall Mounted


Body Width

LED Light

Motor Qty

Model


Maximum Height(H =)

403mm

STA 900L-2

900mm

Cool

STAR 900L-2

W/Rail

3

510mm All-thread Fixing CentresCorner Type

Condari Pty Ltd.

Light Centres

Light Qty

Nightlight

Page 1 of 2

Filter Qty



Model

Minimum Height(H =) 740mm

YES

Junction Box

272mm x 355mm

STA 900L-2

3

510mm

YES

N/A

1550mm

Round

N/A

Round

1550mm

YES

Junction Box


YES2 2

YES

403mm

Cool

2

900mm

2


740mm

STAR 900L-2 W/Rail

YES

20

250

H

80

20250

Power EntrySTA 900L-2 shownwithout shroud.

Ø9mm S-S rail

Shroud

STAR 900L-2 shownwithout shroud.

Shroud

380

Shroud

Rangehood is manufactured as top duct only. A conversion kit for back ducted is supplied.

510

15mm Radius

15mm Radius

STATESMAN - STA/STAR


StatesmanTechnical Specification Sheet

STA / STAR Wall Mounted


N/A

Round

N/A

Round

740mm

1550mm

Junction Box

STAR 1200L-2 W/Rail

YES

272mm x 355mm

YES

STA 1200L-2

YES

272mm x 355mm

Page 2 of 2

YES

740mm

1550mm

Junction Box

Body Width


Nightlight

Motor Qty

LED Light

Light Qty

403mm

2

Cool

YES

2

403mm

2

Cool

YES

4

648mm

2

STAR 1200L-2 W/Rail

1200mm

Model

1200mm

STA 1200L-2

Filter Qty 4

Light Centres 648mm

Condari Pty Ltd.

Corner Type



Filter Size

Model


Maximum Height(H =)


Minimum Height(H =)

25020

80

H

250

20

Ø9mm S-S rail

STA 1200L-2 shownwithout shroud.

STAR 1200L-2 shownwithout shroud.

Shroud

Shroud

Power Entry

380

Shroud15mm

Radius

15mm Radius

510

Rangehood is manufactured as top duct only. A conversion kit for back ducted is supplied.

STATESMAN - STA/STAR


IntegraTechnical Specification Sheet

IN Wall Mounted


Body Width

LED Light

Motor Qty

Model


Maximum Height(H =)

N/A

IN 600L-1

600mm

Cool

IN 900L-2

3


Condari Pty Ltd.

Light Centres

Light Qty

Nightlight

Page 1 of 2

Filter Qty



Model

Minimum Height(H =) N/A

YES

Remote Switching

272mm x 355mm

IN 600L-1

2

Centre

NO

N/A

N/A

Square

N/A

Square

N/A

N/A

Remote Switching


N/A1 2

NO

N/A

Cool

2

900mm

1


N/A

IN 900L-2

YES

600

20110

20110

300

100

70

Power entry locations are the same for all

Integra models.

INTEGRA - IN


IntegraTechnical Specification Sheet

IN Wall Mounted


N/A

Square

N/A

Square

N/A

N/A

Remote Switching

IN 1200L-3

YES

272mm x 355mm

N/A

IN 1200L-2

YES

272mm x 355mm

Page 2 of 2

N/A

N/A

N/A

Remote Switching

Body Width


Nightlight

Motor Qty

LED Light

Light Qty

N/A

2

Cool

NO

2

N/A

3

Cool

NO

4

560mm

2

IN 1200L-3

1200mm

Model

1200mm

IN 1200L-2

Filter Qty 4

Light Centres 560mm

Condari Pty Ltd.

Corner Type



Filter Size

Model


Maximum Height(H =)


Minimum Height(H =)

Power entry locations are the same for all

Integra models.

600

20110

70

100

20110

300

INTEGRA - IN


INSTALLATION INSTRUCTIONS • TR CT (REMOTE SWITCHED)

1. Remove hood from packaging being careful not to touch the stainless steel front.2. Locate centre of stove and using level or plumb line, mark centre line up to the ceiling.3. In a new house the hood can be fixed into the ceiling space by bolting or screwing into the ceiling joists or by

building a frame to support the hood.4. In an existing home, a hole must be cut into the ceiling and pushing the hood into the space. Ensure there are no

obstructions to placing the hood in position. In these cases a ceiling flange in stainless can be supplied to finish the hood to the ceiling. It is not supplied in colours.

5. The outlets are either top or back ducted and can be changed on site and the hood can be reversed to suit the intended ducting direction.

6. Once secure in position standard ducting pieces can be used.7. Switches are not provided and remote switching in a convenient position must be installed. The switching used

must be an electrically approved switch and is not provided by Condari Pty Ltd.8. The TR CT can be wired with either individual fan control or one pair of switches to control all fans together.

Contact Condari for further information



ThermidorTechnical Specification Sheet

TR CT Ceiling Cavity Mounted

Grill Size

Filter Qty

All-thread Fixing Centres498mm x 596mm

5 Corner Type

Page 1 of 1


Condari Pty Ltd.

2

NO

598mm x 596mm

Nightlight

Grill Qty

4

3

1200mm

Model TR CT 1500-3

N/A

Model

Body Width

LED Light

3 Remote Switching

N/A

Motor Qty

N/ANO

NONO

3

Filter Size1500mm

TR CT 1200-3

N/A ConversionTop/Back Back/Top


N/A

Square


Remote Switching

N/A

Square

TR CT 1200-3

290mm x 480mm

YES

N/A

TR CT 1500-3

YES

Maximum Height(H =)


N/A

290mm x 480mm

N/A

N/A

600

350

20110

20110

This view is shown with grillsremoved to expose filters.

Power entry locationis the same for allThermidor models.

Optional Flange

THERMIDOR - TR CT


INSTALLATION INSTRUCTIONS • BRH / LAM • BAR • MAR • MAJ • FAS

1. Remove hood from packaging being careful not to touch stainless steel front.2. Locate centre of stove and using level or plumb line, mark centre line up to ceiling.3. Measure height of hood and mark same distance down from ceiling with level line.4. Mark where ducting needs to be cut either on wall or ceiling, check for wires and timber, then cut hole for ducting.5. Locate solid fixing points on wall (This hood is very heavy and requires good solid fixing points). If necessary fit

some solid fixing timber to wall behind hood now.6. Mark fixing points on rear of hood and drill fixing holes to take solid screws.7. Drill hole in rear or top of the hood to take electrical cable.8. It may be easier to remove fans for easier fixing and weight when installing.9. If you do not have adjustable stands you can cut some temporary timber props to sit canopy on when you lift into

position, to hold it while you fit fixing screws.10. You need two people to lift this canopy into position. * Do not attempt this on your own, as you could cause

yourself injury and damage the hood or stove. CAUTION: Do not under any circumstances lift from the front of the hood or put any pressure on the front face as you will damage the hood permanently.

11. Carefully lift hood into position and sit on stands to level hood, then screw hood into position through fixing holes. Make sure you put fixing holes high up in the hood to stop it falling forward.

12. Fit ducting to hood to the outside atmosphere as required either through the roof with appropriate flashing by a plumber or through the rear wall vent, which needs to be siliconed to the rear of the hood. Always use approved ducting and seal all duct joins with duct tape or silicone.

13. An electrician should make the electrical connection to the hood by connecting to the 10 AMP junction box. Ensure power is turned off during this procedure.

14. Refit fans to hood, insert filters and test.

Handy hints: Sometimes it is easier to lift the hood with a person in the roof space pulling up on a rope attached to a wooden block placed inside base of hood and a second person down the bottom guiding the hood into position.





Body Width

Model

Motor Qty

Light Centres

Light Qty

Nightlight

LED Light

Filter Qty

Model



BRH 600L-1 BRH 900L-2BRH 900L-1BRH 600L-1BRH 900L-2BRH 900L-1

600mm

310mm

2

N/A

1

Cool

YES

2

272mm x 355mm

NO

Junction Box

400mm

1450mm

YES

500mm

Square

900mm

N/A

1

Cool

YES

2

510mm

3

900mm

N/A

2

Cool

YES

2

510mm

3

272mm x 355mm

NO

Junction Box

400mm

1450mm

YES

800mm

Square

272mm x 355mm

NO

Junction Box

400mm

1450mm

YES

800mm

Square

BentonTechnical Specification Sheet

BRH Wall Mounted


Benton models.

510

H

All-Thread rods

are

supplied

for

extra

support.

BENTON - BRH


BentonTechnical Specification Sheet

BRH Wall Mounted

BRH 1200L-2

2

3

510mm

YESYES

2

1200mm

N/A

22

N/A

Cool

1000mm

BRH 1000L-2

Cool

Light Centres

Filter Qty

Nightlight

Light Qty

LED Light

Motor Qty

Model

Body Width

Maximum Height(H =)

Corner Type

648mm

Condari Pty Ltd.

4




Page 2 of 2


Minimum Height(H =)

Model


400mm

NO

BRH 1000L-2

290mm x 355mm


YES

1450mm


NO

1450mm

YES

400mm

Square

800mm

Square

950mm

272mm x 355mm

BRH 1200L-2


Benton models.

510

75

250H

20250

All-Thread rods

are

supplied

for

extra

support.

BENTON - BRH


LamontTechnical Specification Sheet

LAM Wall Mounted

NO

LAM 900L-1

Junction Box

272mm x 355mm

LAM 900L-2

272mm x 355mm

NO

Junction Box

800mm

Square

Page 1 of 2

N/A

1100mm

Square

800mm

1100mm

400mm400mmMaximum Height(H =)



Filter Size

Model

N/A


Minimum Height(H =)

PowderKote AvailableAll-thread Fixing Centres

900mm

LAM 900L-2

N/A

510mm

2

Cool

3

2

YES

Body Width

Motor Qty


Model

900mm

Cool

N/A

LAM 900L-1

Light Qty

Condari Pty Ltd.

Corner Type

Light Centres

Filter Qty

LED Light

Nightlight

1

510mm

3

YES

2


Lamont models.

510

H

All-Thread rods

are

supplied

for

extra

support.

LAMONT - LAM


LamontTechnical Specification Sheet

LAM Wall Mounted

LAM 1200L-2

2

3

510mm

YESYES

2

1200mm

N/A

22

N/A

Cool

1000mm

LAM 1000L-2

Cool

Light Centres

Filter Qty

Nightlight

Light Qty

LED Light

Motor Qty

Model

Body Width

Maximum Height(H =)

Corner Type

648mm

Condari Pty Ltd.

4




Page 2 of 2


Minimum Height(H =)

Model


400mm

NO

LAM 1000L-2

290mm x 355mm


N/A

1100mm


NO

1100mm

N/A

400mm

Square

800mm

Square

950mm

272mm x 355mm

LAM 1200L-2


Lamont models.

510

75

250H

20250

All-Thread rods

are

supplied

for

extra

support.

LAMONT - LAM


BarclayTechnical Specification Sheet

BAR Wall Mounted

Light Centres

Filter Qty


Varies depending onlength of rangehoodVaries depending onlength of rangehood Corner Type

Page 1 of 1


Condari Pty Ltd.

Varies depending onlength of rangehood

YES

Varies depending on length of rangehood

Nightlight

Light Qty



1800mm-2400mm

Model BAR 2400-3000L-2

900mm,1000mm,1200mm

Model

Body Width

LED Light

2 Junction Box

550mm

Motor Qty

1550mmYES

CoolCool

2

Filter Size2400mm-3000mm

BAR 1800-2400L-2

900mm,1000mm,1200mm ConversionTop/Back Back/Top


N/A

Square


Junction Box

N/A

Square

BAR 1800-2400L-2Varies depending onlength of rangehood

NO

N/A

BAR 2400-300L-2

NO

Maximum Height(H =)


N/A


1550mm

550mm

510

H

2025075

250


Barclay models. Motor Box can be either L/H or R/H.

100

Optional Design

BARCLAY - BAR



Condari Pty Ltd. Page 1 of 2Version: A 01/07/2014F

Body Width

Model

Motor Qty

Light Centres

Light Qty

Nightlight

LED Light

Filter Qty

Model



MAR 900L-1 MAR 1200L-2MAR 900L-2MAR 900L-1MAR 1200L-2MAR 900L-2

900mm

422mm

2

N/A

1

Cool

YES

2

422mm x 272mm

NO

Junction Box

N/A

N/A

N/A

N/A

Square

900mm

N/A

2

Cool

YES

2

422mm

2

1200mm

N/A

2

Cool

YES

2

544mm

4

422mm x 272mm

NO

Junction Box

N/A

N/A

N/A

N/A

Square

272mm x 272mm

NO

Junction Box

N/A

N/A

N/A

N/A

Square

MartellTechnical Specification Sheet

MAR Wall Mounted


Martell models.

510

500

11020

20

300110

148

700

MARTELL - MAR


MartellTechnical Specification Sheet

MAR Wall Mounted

Model


Minimum Height(H =)


Filter SizeBody Width


Model

Maximum Height(H =)

MAR 1500L-3

272mm x 272mm

N/A



422mm

4

Condari Pty Ltd.

Square

N/A

N/A

Square

N/A

Motor Qty

Page 2 of 2

N/A

N/A

Nightlight

Light Qty

N/A

1500mm

MAR 1500L-3

816mm

5

LED Light

Light Centres

Filter Qty

Junction Box

NO

MAR 1800L-3

3

MAR 1800L-3

3

YES

2

Cool

4

N/ACool

YES

N/A

1800mm 422mm x 272mm

NO

Junction Box

N/A



Martell models.

148

110300

20

20110

500

510

700

MARTELL - MAR


MajesticTechnical Specification Sheet

MAJ Wall Mounted

2

350mm

Minimum Height(H =)

Light Centres

Light Qty

900mm

MAJ 900L-1

LED Light


Nightlight

3

Condari Pty Ltd.

Filter Qty 3

Motor Qty


600mm


Body Width

Model MAJ 900L-1

Page 1 of 2


NO

MAJ 900L-2

Square Square

600mm

MAJ 1000L-2

600mm

N/A

1150mmMaximum Height(H =)PowderKote Available

Corner Type


N/AAll-thread Fixing Centres

1000mm

N/A

Cool

22

MAJ 900L-2

Cool

350mm

22

350mm

YES

Junction Box

NO

Junction Box

1150mm 1150mm

NO

N/A

Square

600mm 600mm

422mm x 272mm272mm

x 272mm

600mm

Junction Box

ModelMAJ 1000L-2

YESYES

1

N/A

Cool

N/A

900mm

2

H

300

500

Power entry locationis the same for allMajestic models.

150

All-Thread rods

are

supplied

for

extra

support.

MAJESTIC - MAJ


MajesticTechnical Specification Sheet

MAJ Wall Mounted

272mm x 272mm

MAJ 1500L-2


Filter Size

Model

1500mm

N/A


YES

Minimum Height(H =)


NO

MAJ 1500L-2

N/A

600mm

5

2

Cool

22

2

YES

Cool

1200mm

4


Model

LED Light

Light Centres

Filter Qty

500mm

Maximum Height(H =)


800mm

1150mm

N/A

Junction Box


1150mm

Junction Box

600mm

All-thread Fixing CentresCorner Type Square

1100mm

Square

N/A

600mm

272mm x 272mm

NO

MAJ 1200L-2MAJ 1200L-2

Body Width

Nightlight

Motor Qty

Light Qty

Power entry locationis the same for allMajestic models.

500

300

H150

All-Thread rods

are

supplied

for

extra

support.

MAJESTIC - MAJ


FasanoTechnical Specification Sheet

FAS Wall Mounted

Light Centres

Filter Qty

All-thread Fixing Centres648mm

4 Corner Type

Page 1 of 1


Condari Pty Ltd.

2

YES

510mm

Nightlight

Light Qty

3

2

900mm

Model FAS 1200L-2

N/A

Model

Body Width

LED Light

2 Junction Box

700mm

Motor Qty

1400mmYES

CoolCool

2

Filter Size1200mm

FAS 900L-2



300mm x 500mm

Square


Junction Box

300mm x 800mm

Square

FAS 900L-2

272mm x 355mm

NO

YES

FAS 1200L-2

NO

Maximum Height(H =)


YES

272mm x 355mm

1400mm

700mm


Fasano models.

510

250

250

75 50

360

H

All-Thread rods are supplied for extra support.

FASANO - FAS


INSTALLATION INSTRUCTIONS • 4F • PRE / FRA • SQ 420 / MOL • FPR • MA • HAM • BUR / LAM • D 400 / D 500 / SEN

It is recommended that the rangehood be mounted 100mm back from the edge of the benchtop.

1. The rangehood can be installed between 700mm and 800mm above the cooking surface. The installer should check for local requirements in case additional provisions apply.

2. It is advisable to remove fans for easier handling of unit by removing retaining bolts or clips and unplugging electrical connector.

3. Measure hole centres and duct size on top of the rangehood. This will vary with the hood size, model and number of fans fitted and will determine the ducting required.

4. Using a plumb line, mark the ceiling before making the cut out. Check for obstructions like electrical cables etc.5. Cut two (2) supporting beams approximately 1.0m long and pre-drill hole centres so that the supporting beams

are 90 degrees to the ceiling joists.6. Fit 8mm all thread (threaded rod) through holes provided and secure with nuts and washers.7. Level unit by tensioning the 8mm nuts. Do not over tighten.8. Fit off ducting as required.


Installation Suggestions1) 2)



4F Ceiling Mounted

Model 4F 900L-2 4F 1200L-2

Body Width 272mm x 422mm

Corner Type

Condari Pty Ltd.



Filter Size

2

YES


293mm x 140mm


648mm

Maximum Height(H =)

343mm x 140mm°

YES

Round

1660mm

N/A

480mm

4

Cool

2

3

510mm

Light Qty

Filter Qty

Light Centres

Nightlight

Motor Qty

LED Light


Minimum Height(H =)

Round

YES

Model4F 1200L-24F 900L-2

10 Amp Lead

Cool

900mm

350mm

2

400mm

1200mm

YES

2

Electrical Connection 10 Amp Lead

N/A

272mm x 422mm

480mm

1660mm

Power Entry

Ø15mm Radius

Power Entry

A Transition is supplied to suit standard DL2 ducting.

600

80480

H

200

Ø15mm Radius

160

4 FLARE - 4F


PresidentTechnical Specification Sheet

PRE Ceiling Mounted

Model

Body Width


PRE 900L-2

Condari Pty Ltd.

Corner Type

Motor Qty

Nightlight

Light QtyAll-thread Fixing Centres

Maximum Height(H =)

4

648mm510mm

Cool

3Filter Qty

Light Centres

LED Light

360mm x 250mm 360mm

x 250mm

1600mm

YES

272mm x 422mm

PRE 900L-2


NO

550mm

10 Amp Lead


Round

550mm

YES

Page 1 of 2

Round

900mm

420mm

2

YES

2

PRE 1200L-2 Model

1600mm

NO

10 Amp Lead


Minimum Height(H =)

2

Cool

YES

2

1200mm

420mm


PRE 1200L-2

272mm x 422mm

Power Entry

100

H

85 85250420

Power Entry600

Ø15mm Radius

Ø15mm Radius

PRESIDENT - PRE


840mm x 270mm

Round

840mm x 270mm

Round

YES

550mm

10 Amp Lead

NO NO

1600mm

10 Amp Lead

Round


360mm x 250mmAll-thread

Fixing Centres

3

Cool

1800mm

900mm

Maximum Height(H =)

42

816mm

6

422mm

5

Cool

YES YES

900mm

1500mm

Cool

3

PRE 1500L-3 PRE 1800L-3

420mm

2

YES

2

10 Amp Lead

NO

PRE 1500L-2

272mm x 422mm

YES

550mm

272mm x 422mm 290mm

x 422mm

1600mm

Model


550mm

YES

1600mm

PRE 1800L-3

Corner Type


PRE 1500L-3

Condari Pty Ltd.

Filter Size

816mm

5

1500mm

LED Light

Filter Qty

PRE 1500L-2


Light Centres

Light Qty

Nightlight

Model

Body Width


PresidentTechnical Specification Sheet

PRE Ceiling Mounted

Power Entry

25085

H

100

85

420

Power Entry

600

Ø15mm Radius

Ø15mm Radius

PRESIDENT - PRE


MaddisonTechnical Specification Sheet

MA Ceiling Mounted

Light Centres

Filter Qty



Page 1 of 1


Condari Pty Ltd.


YES


Nightlight

Light Qty



2000mm-2500mm

Model MA 2500-3000L-4

420mm

Model

Body Width

LED Light

4 10 Amp Lead

550mm

Motor Qty

1600mmYES

CoolCool

4


MA 2000-2500L-4

420mm ConversionTop/Back Back/Top


360mm x 250mm

Square


10 Amp Lead

360mm x 250mm

Square

MA 2000-2500L-4Varies depending onlength of rangehood

N/A

N/A

MA 2500-3000L-4

N/A

Maximum Height(H =)


N/A


1600mm

550mm

H

Motor Box

WidthMotor

Box

Width250 250

420

250

Flues are equally spacedacross the body width.

Power Entry.

150

2020

Body Width 600

Equal Equal Equal

MADDISON - MA


WintonTechnical Specification Sheet

SQ 420 Ceiling Mounted


Filter Size

Model


Page 1 of 1

Corner Type

YES

Filter Qty 1

Motor Qty

Light Qty

Light Centres


Body Width

Model

Cool

YES

1

SQ 420L-2

2

420mm

N/A

Centre

LED Light

Nightlight

Condari Pty Ltd.

10 Amp Lead

SQ 420L-2

Square


NO

250mm X 320mm

1450mm

520mm

355mm x 250mm

Front

Power Entry.

420 420

H

85 250 85 85 250 85

WINTON - SQ


MolinaTechnical Specification Sheet

MOL Ceiling Mounted


Filter Size

Model


Page 1 of 1

Corner Type

N/A

Filter Qty 1

Motor Qty

Light Qty

Light Centres


Body Width

Model

Cool

YES

1

MOL 420L-2

2

420mm

N/A

Centre

LED Light

Nightlight

Condari Pty Ltd.

10 Amp Lead

MOL 420L-2

Square


NO

250mm X 320mm

1100mm

520mm

355mm x 250mm

85 250 85

420 420

85 250 85

Power Entry.

H

Front

MOLINA - MOL


HamiltonTechnical Specification Sheet

HAM Ceiling Mounted

Light Centres

Filter Qty

All-thread Fixing Centres648mm

4 Corner Type

Page 1 of 1


Condari Pty Ltd.

2

YES

510mm

Nightlight

Light Qty

3

2

900mm

Model HAM 1200L-2

N/A

Model

Body Width

LED Light

2 10 Amp Lead

700mm

Motor Qty

1400mmYES

CoolCool

2

Filter Size1200mm

HAM 900L-2



500mm x 230mm

Square


10 Amp Lead

800mm x 230mm

Square

HAM 900L-2

272mm x 422mm

NO

YES

HAM 1200L-2

NO

Maximum Height(H =)


YES

272mm x 422mm

1400mm

700mm

600

H

30025 25

Power entry locationis the same for allHamilton models.

250

Front

Front

HAMILTON - HAM


FremontTechnical Specification Sheet

FPR Ceiling Mounted

Light Centres

Filter Qty



Page 1 of 1


Condari Pty Ltd.


YES


Nightlight

Light Qty



1600mm-2600mm

Model FPR 2600-3600L-2

420mm

Model

Body Width

LED Light

2 10 Amp Lead

550mm

Motor Qty

1600mmYES

CoolCool

2


FPR 1600-2600L-2

420mm ConversionTop/Back Back/Top


360mm x 250mm

Square


10 Amp Lead

360mm x 250mm

Square

FPR 1600-2600L-2Varies depending onlength of rangehood

N/A

N/A

FPR 2600-3600L-2

N/A

Maximum Height(H =)


N/A


1600mm

550mm

Power Entry.

Motor Box

can

be

either L/H

or

R/H

600

150

H

25020420

Support Alternatives

Rigging Round Square Square w-cross

brace

Ø16mm S-S

Tube 25mm

x 25mm

SQ

S-S

Tube 25mm

x 25mm

SQ

S-S

Tube

These centre

dimensions

are

typical for

all

support

fixings

FREMONT - FPR


BurdettTechnical Specification Sheet

BUR Ceiling Mounted


Body Width

LED Light

Motor Qty

Model


Maximum Height(H =)

N/A

BUR 900L-2

900mm

Cool

BUR 1000L-2

3


Condari Pty Ltd.

Light Centres

Light Qty

Nightlight

Page 1 of 3

Filter Qty



Model


NO

10 Amp Lead

272mm x 422mm

BUR 900L-2

3

510mm

YES

500mm x 900mm

1450mm

Square

500mm x 800mm

Square

1450mm

YES

10 Amp Lead


YES2 2

YES

N/A

Cool

2

1000mm

2


400mm

BUR 1000L-2

NO


Burdett models.

600

H

250 Front

Front

BURDETT - BUR



BUR Ceiling Mounted


500mm x 1100mm

Square

500mm x 1100mm

Square

400mm

1450mm

10 Amp Lead

BUR 1200L-3

NO

272mm x 422mm

YES

BUR 1200L-2

NO

272mm x 422mm

Page 2 of 3

YES

400mm

1450mm

10 Amp Lead

Body Width


Nightlight

Motor Qty

LED Light

Light Qty

N/A

2

Cool

YES

2

N/A

3

Cool

YES

4

648mm

2

BUR 1200L-3

1200mm

Model

1200mm

BUR 1200L-2

Filter Qty 4

Light Centres 648mm

Condari Pty Ltd.

Corner Type



Filter Size

Model


Maximum Height(H =)


Minimum Height(H =)


Burdett models.

600

H

Front

Front

BURDETT - BUR



BUR Ceiling Mounted



Model

Body Width

Condari Pty Ltd.

Maximum Height(H =)

Minimum Height(H =)


5


1500mm

N/A

3

Page 3 of 3

816mm

N/A

BUR 1500L-2

1500mm

Filter Qty

Light Centres

Light Qty

Nightlight

LED Light

5

Model



500mm x 1400mm

Square

500mm x 1400mm

Square

Cool

YES

BUR 1500L-3

YES

2

Cool

2

816mm

272mm x 422mm

BUR 1500L-2

YES

1450mm

400mm

NO

10 Amp Lead

BUR 1500L-3

2

400mm

1450mm

10 Amp Lead

NO

272mm x 422mm

YES


Burdett models.

600

H

Front

Front

BURDETT - BUR


BelgradTechnical Specification Sheet

BEL Ceiling Mounted


Body Width

LED Light

Motor Qty

Model


Maximum Height(H =)

N/A

BEL 900L-2

900mm

Cool

BEL 1000L-2

3


Condari Pty Ltd.

Light Centres

Light Qty

Nightlight

Page 1 of 2

Filter Qty



Model


NO

10 Amp Lead

272mm x 422mm

BEL 900L-2

3

510mm

YES

500mm x 900mm

1100mm

Square

500mm x 800mm

Square

1100mm

N/A

10 Amp Lead


N/A2 2

YES

N/A

Cool

2

1000mm

2


400mm

BEL 1000L-2

NO


Belgrad models.

600

H

250 Front

Front

BELGRAD - BEL


BelgradTechnical Specification Sheet

BEL Ceiling Mounted


500mm x 1100mm

Square

500mm x 1100mm

Square

400mm

1100mm

10 Amp Lead

BEL 1200L-3

NO

272mm x 422mm

N/A

BEL 1200L-2

NO

272mm x 422mm

Page 2 of 2

N/A

400mm

1100mm

10 Amp Lead

Body Width


Nightlight

Motor Qty

LED Light

Light Qty

N/A

2

Cool

YES

2

N/A

3

Cool

YES

4

648mm

2

BEL 1200L-3

1200mm

Model

1200mm

BEL 1200L-2

Filter Qty 4

Light Centres 648mm

Condari Pty Ltd.

Corner Type



Filter Size

Model


Maximum Height(H =)


Minimum Height(H =)


Belgrad models.

600

H

Front

Front

BELGRAD - BEL


AlbanyTechnical Specification Sheet

D Ceiling Mounted

Light Centres

Filter Qty

All-thread Fixing CentresCentre

1 Corner Type

Page 1 of 1


Condari Pty Ltd.

1

NO

Centre

Nightlight

Light Qty

1

1

400mm

Model D 500L-2

N/A

Model

Body Diameter

LED Light

1 10 Amp Lead

550mm

Motor Qty

1500mmYES

CoolCool

2

Filter Size500mm

D 400L-1



300mm x 160mm

N/A


10 Amp Lead

410mm x 160mm

N/A

D 400L-1

272mm x 272mm

N/A

N/A

D 500L-2

N/A

Maximum Height(H =)


N/A

379mm x 290mm

1500mm

650mm

Power Entry.

Power Entry.

All-Thread

All-T

hrea

d

235

110

Body Diameter

Body Diameter

All-Thread

All-T

hrea

d

250

250

90

D400 & D500Instructions

1. Remove Rangehood from packaging and place on a flat clean surface. 2. Remove the filter.

3. Remove the four screws in the corners of the filter apperture.

4. Gently pull the base from the tube.

5. Once removed, the power supply plug becomes visible. Disconnect and place the base assembly to one side. 6. Place the four lengths of All'thread Rod through the holes in the hood and (make sure the seam is facing the right direction) secure through a brace in the ceiling. Feed the plug and cord into the ceiling space. 7. Fit nuts to top and bottom of All'thread Rods and tighten. 8. Reconnect the power plug and reinstall base assembly. 9. Connect power supply in ceiling and test Rangehood.

10. Fit off ducting as required.

Do not use flexible ducting.Do not reduce duct size.All duct pieces are available from 'Condari' or through your dealer.

1. Remove Rangehood from packaging and place on a flat clean surface.2. Remove the filter.3. Remove the four screws in the corners of the filter apperture.4. Gently pull the base from the tube.5. Once removed, the power supply and fan plug becomes visible. Disconnect and place the base assembly to one side.6. Place the four lengths of All-thread Rod through the holes in the hood and (make sure the seam is facing the right direction) secure through a brace in the ceiling. Feed the plug and cord into the ceiling space.7. Fit nuts to top and bottom of All-thread Rods and tighten.8. Reconnect the power plug and reinstall base assembly.9. Connect power supply in ceiling and test Rangehood.10. Fit off ducting as required

D 400L-1 / SEN 400L-1D 500L-2 / SEN 500L-2


AlbanyTechnical Specification Sheet

D Ceiling Mounted

Light Centres

Filter Qty


1 Corner Type

Page 1 of 1


Condari Pty Ltd.

1

NO

Centre

Nightlight

Light Qty

1

1

400mm

Model D 500L-2

N/A

Model

Body Diameter

LED Light

1 10 Amp Lead

550mm

Motor Qty

1500mmYES

CoolCool

2

Filter Size500mm

D 400L-1



300mm x 160mm

N/A


10 Amp Lead

410mm x 160mm

N/A

D 400L-1

272mm x 272mm

N/A

N/A

D 500L-2

N/A

Maximum Height(H =)


N/A

379mm x 290mm

1500mm

650mm

Power Entry.

Power Entry.

All-Thread

All-T

hrea

d

235

110

Body Diameter

Body Diameter

All-Thread

All-T

hrea

d

250

250

90

ALBANY - D


SenecaTechnical Specification Sheet

SEN Ceiling Mounted

Light Centres

Filter Qty


1 Corner Type

Page 1 of 1


Condari Pty Ltd.

1

NO

Centre

Nightlight

Light Qty

1

1

400mm

Model SEN 500L-2

N/A

Model

Body Diameter

LED Light

1 10 Amp Lead

550mm

Motor Qty

1100mmYES

CoolCool

2

Filter Size500mm

SEN 400L-1



300mm x 160mm

N/A


10 Amp Lead

410mm x 160mm

N/A

SEN 400L-1

272mm x 272mm

N/A

N/A

SEN 500L-2

N/A

Maximum Height(H =)


N/A

379mm x 290mm

1100mm

650mm

Power Entry.

Power Entry.

All-Thread

All-T

hrea

d

235

110

Body Diameter

Body Diameter

All-Thread

All-T

hrea

d

25025

0

90

SENECA - SEN


110. DD-1-LDuct Director Left

102. HB-1 Horizontal Bend 90º

101. DL-1 Duct Length 1200mm DL-1C Duct Length (coloured)

105. BD/WV-H-1 MGS Back Draft Wall Vent Horizontal Marine Grade Stainless Steel

106. VB-1 Vertical Bend 90º

104. BD/WV-H-1 Back Draft Wall Vent Horizontal

108. BD/WV-V-1 Back Draft Wall Vent Vertical

107. VB-1/45 Vertical Bend 45º

109. BD/WV-V-1 MGS Back Draft Wall Vent Vertical

Marine Grade Staineless Steel

103. HB-1/45 Horizontal Bend 45º

101. DL-1E Duct Length Extendable 1200mm

101. DL-1A Duct Length 300mm

I/D Internal Diameter

SINGLE MOTOR DUCTING

NOTE:This Zinc Alume Strip is provided to join some duct pieces together. It will be clearly shown on the drawing of the piece it is supplied with.


120. DR-200/90 Round Bend 90º

122. AS-20 Back Draft Shutter

123. CH-200 Chairman’s Hat 200ø

124. CH-200 CBChairman’s Hat 200ø Colourbond

125. BD/RC-1 Back Draft Roof Cowl

121. BD-6/7/9 WV-R/R Rear Register Kit

112. TT-1 Twisted Transition

113. DLE-DLE Flue Joiner


116. TR-1 Rectangular to Round Transition

117. DR-200 Duct Length 200ø 1200mm

118. DR-200 CB Duct Length 200ø 1200mm Colourbond

115. CD-920 to DL-1 Cavity Duct to Duct Length

114. CD-920 Cavity Duct Extendable

111. DD-1-R Duct Director Right




138. RCP-200 S/S Roof Cap 200ø Stainless Steel

137. WVC-6/7/9H-R/R Wall Vent Cover

133. WVC-V-1 Wall Vent Cover Vertical

136. EV/DL-1 Eave Vent Suit DL-1

132. WVC-H-1 MGS Wall Vent Cover Horizontal

Marine Grade Stainless Steel

134. WVC-V-1 MGS Wall Vent Cover Vertical


135. 6/7/900H-SC Spiggot Cap

130. CF-6/7/900H Ceiling Flange 6/7/900H

131. WVC-H-1 Wall Vent Cover Horizontal

139. RC-200 S/S Roof Cowl 200ø Stainless Steel

140. RC-200 Roof Cowl 200ø Zinc Alumne

127. BD/SQ-RC 200 Back Draft Roof Cowl 200ø

128. DLE-S/S CAP Stainless Steel Cap

129. BD/M-1 Back Draft Damper

126. BD/RC-1 CB Back Draft Roof Cowl Colourbond


WALL VENT

144. FRWV-V-1 Fire Rated Wall Vent Vertical

143. FRWV-H-1 Fire Rated Wall Vent Horizontal

142. FRC-200 Fire Rated Roof Cowl 200ø Grade 445 Stainless Steel.

141. RC-1 S/S Roof Cowl Single Motor Stainless Steel

WALL VENT

The wall vent and wall vent cover are made from 445M2 grade stainless steel which has a higher content of the corrosion element, chromium. The wall vent covers have stainless steel screening type 316 grade and meets the requirements for stainless steel screening under the Australian Standard AS 3959-2009 Construction of Buildings in Bushfire-prone areas, and are BAL 29 and BAL 40 compliant.

FIRE RATED WALL VENT SPECIFICATIONS


212. DLE-2 to DLE-2 Flue Joiner

210. BD/WV-V-2 MGS Back Draft Wall Vent

Marine Grade Stainlerss Steel

209. BD/WV-V-2 Back Draft Wall Vent




206. BD/WV-H-2 MGS Back Draft Wall Vent

Marine Grade Stainless Steel205. BD/WV-H-2

Back Draft Wall Vent204. HB-2/45

Horizontal Bend 45º

202. DL-2 Duct Length 1200mm

201. TMT Twin Motor Transition to DL-2



TWIN MOTOR DUCTING



224. HB-250 Horizontal Bend 250sq 90º

223. DL-250 Duct Length 250sq 1200mm with Strap

222. TMT-250 Twin Motor to 250sq

220. DL-2 to 250SQ Rectangular to Square Transition

221. TMT-250/300 Transition from 250sq to 300º


225. HB-250/45 Horizontal Bend 250sq 45º

226. TMT-250/90-L Duct Director 250sq Left

227. TMT-250/90-R Duct Director 250sq Right


217. DR-300 CB Duct Length 300ø 1200mm Colourbond

216. DR-300 Duct Length 300ø 1200mm

215. TR-2 Transition from DL-2 to 300ø

214. TMT-300 Transition to 300ø

213. BD-10/12/15-WV-R/R Rear Register Kit

TWIN MOTOR DUCTING


232. CH-300 Chairman’s Hat 300ø

233. CH-300 CB Chairman’s Hat 300ø Colourbond

234. BD/SQ-RC-300 Back Draft Roof Cowl 300ø

236. DLE-2-SS CAP Flue Cap

237. CF-10/12/1500H Ceiling Flange10/12/1500H

235. BD/RC-250SQ Back Draft Roof Cowl 250sq

239. CF-3F1200-2 Ceiling Flange 3F1200-2



230 BD/RC-2 Back Draft Roof Cowl

229. BD/WV-250SQ MGS Back Draft Wall 250sq Marine Grade

Stainless Steel

231. BD/RC-2 CB Back Draft Roof Cowl Colourbond



228. BD/WV-250SQ Back Draft Wall 250sq

TWIN MOTOR DUCTING


244. WVC-V-2 Wall Vent Cover Vertical

245. WVC-V-2 MGS Wall Vent Cover Vertical Marine Grade

Stainless Steel

246. WVC-250SQ Wall Vent Cover 250sq

250. DD-2H-L Duct Director Horizontal Left

248. WVC-10/12/1500H Wall Vent Cover 10/12/1500H

247. WVC-250SQ MGS Wall Vent Cover 250sq Marine Grade

Stainless Steel

249. 10/12/1500H-SC Spiggot Cap 10/12/1500H

253. DD-2V-R Duct Director Vertical Right

254. EV/DL-2 Eave Vent to Suit DL-2


257. BD/WVC-SBS Back Draft Wall Vent Cover

255. BD/M-250SQ Back Draft Damper 250sq

243.WVC-H-2 MGS Wall Vent Cover Horizontal


251. DD-2H-R Duct Director Horizontal Right

252. DD-2V-L Duct Director Vertical Left

TWIN MOTOR DUCTING


261. RC-300 S/S Roof Cowl Twin Motor Stainless Steel

262. RC-2 S/S Roof Cowl Twin Motor Stainless Steel

258. CF 3F-1500-2 Ceiling Flange 3F-1500-2

259. RCP-300 S/S Roof Cap 300ø Stainless Steel

260. RV-300 S/S Roof Ventilation Cowl 300ø

Stainless Steel

263. FRC-300 S/SSFire Rated Roof Cowl

Grade 445 Stainless Steel

WALL VENT


266. FRWV-250sq Fire Rated Wall Vent 250sq

WALL VENT



WALL VENT264. FRWV-H-2

Fire Rated Wall Vent Horizontal

TWIN MOTOR DUCTING



304. HB-3/45 Horizontal Bend 45º


302. DL-3 Duct Length 1200mm


301. 3MT-DL-3 Three Motor Transition


308. TMT-400x200/350 Transition from DL-3 to 350ø

311. DR-350 CB Duct Length 350ø Colourbond

310. DR-350 Duct Length 350ø

312. DR-350/45 Bend 45º 350ø

309. TR-3 Transition to 350ø



TRIPLE MOTOR DUCTING



323. BD/WV-V-3 MGS Back Draft Wall Vent Vertical Marine Grade

Stainless Steel322. BD/WV-V-3

Back Draft Wall Vent Vertical

320. BD/WV-H-3 Back Draft Wall Vent Horizontal

321. BD/WV-H-3 MGS Back Draft Wall Vent Horizontal Marine Grade Stainless Steel

325.WVC-H-3 MGS Wall Vent Cover Horizontal

Marine Grade Stainless Steel326. WVC-V-3

Wall Vent Cover Vertical327. WVC-V-3 MGS

Wall Vent Cover Vertical Marine Grade Stainless Steel

317. BD/SQ-RC350 MGS Back Draft Roof Cowl 350ø

Marine Grade Stainless Steel318. CH-350

Chairmans Hat 350ø

319. CH-350 CB Chairmans Hat 350ø Colourbond

316. BD/SQ-RC350 Back Draft Roof Cowl 350ø

313. DR-350/90 Bend 90º 350ø

314. BD/RC-3 Back Draft Roof Cowl

315. BD/RC-3 MGS Back Draft Roof Cowl Marine Grade

Stainless Steel



329. DD-3V-R Duct Director Vertical Right

328. DD-3V-L Duct Director Vertical Left



WALL VENT



WALL VENT331. FRWV-H-3

Fire Rated Wall Vent Horizontal333. FRC-350

Fire Rated Roof Cowl



3. FA 60L-1 T 4. FA 60L-1 T

5. FA 60L-1 T 6. FA 60L-1 T / FA 60L-1 B

INSTALLATION IDEAS

Condari recommends Qasair and Condor Rangehoods be installed using ducting that is: • rigid • non-flammable • correctly sized to ensure maximum air movement and minimum noise levels.

Ducting incorrectly with flexible or smaller diameter ducting will dramatically reduce the air movement and increase the noise level of the rangehood and will void the manufac-turer’s warranty.

The Installation Ideas below will give you some guidelines on how to correctly duct your Qasair and Condor Rangehood using Qasair and Condor ducting pieces.

FA 60L-1 TFA 60L-1 B Rangehood

FA 60L-1 T Rangehood




7. FA 90L-2 T 8. FA 90L-2 T

9. FA 90L-2 T 10. FA 90L-2 B

11. FA 90L-2 T 12. FA 90L-2 T






FA 90L-2 B Rangehood


13. 600HL-1 T / 700HL-1 T / 900HL-1 T 14. 600HL-1 T

15. CON 60L-1 T 16. CON 80L-1 T

17. CON 60L-1 T 18. CON 80L-2 T

CON 80L-2 T RangehoodCON 60L-1 T Rangehood

CON 60L-1 T RangehoodCON 80L-1 T Rangehood

600HL-1 T Rangehood600HL-1 T / 700HL-1 T / 900HL-1 T Rangehood


19. 1200HL-2 T 20. LIS 800L-2 T

21. LIS 1000L-2 T 22. 3F 900L-2 T / 1200L-2 T

23. LIS 500L-1 T 24. LIS 800L-1 T

LIS 800L-2 TRangehood

1200HL-2 TRangehood


3F 900L-2 T / 1200L-2 TRangehood

LIS 800L-1 TRangehoodLIS 500L-1 T

Rangehood


25. CON 80L-1 T / LIS 1000-2 T 26. LIS 1200L-2 B

1. FA 60L-1 B2. FA 90L-1 T

FA-60L-1 BRangehood

FA-90L-1 TRangehood

LIS 1200L-2 BRangehood


CON 80L-1 TRangehood


FILTER CLEANING

RANGEHOOD CLEANING

For the best results, please clean filters regularly. Condari recommends cleaning filters once per month, or immediately after heavy use.

You can do this by hand washing in warm soapy water, or by placing filters in the top rackof the dishwasher using a detergent of pH 8 or less. Note: Washing the filters in the dishwasher may cause discolouration of the filters.

Ensure the filters are completely dry before placing them back. Do not operate the rangehood without the filters installed.

Condari does not recommend the use of any citrus or industrial products, particularly corrosive, caustic or acid.

QASAIR rangehoods are made from stainless steel, either type 304 or type 316.

• Type 304 is classified as 18/8 stainless steel• Type 316 is classified as 18/10 stainless steel.

This means that the stainless is made of 18% nickel and either 8% or 10% of chromium respectively.

Stainless steel gets its protective coating from the chromium oxidising in the air to form a protective surface of chromium oxide.

Please use non-corrosive or non-abrasive cleaners (warm soapy water recommended).Stainless Steel cleaner may be used.


CONDARI PTY LTD APPLIANCE GUARANTEE The benefits conferred by this warranty are in addition to all other rights and remedies in respect of the product which the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.

Condari P/L in Melbourne (and by their agency in Country Areas and other States) warrants that the appliance will be free from defects in materials and workmanship for a period of 36 months from the date of purchase of the appliance to the consumer.

If there is a breach of this warranty, Condari will rectify, free of charge, at it’s nearest service centre or authorised service agency any fault caused by faulty workmanship or material at the time of manufacture occurring in the appliance within 36 months from the date of delivery of the appliance to the customer.

This warranty is conditional upon the appliance being used only for personal, domestic and household purposes and installed and operated in accordance with QASAIR Instructions and does not apply to articles which by their nature are consumable.

If a defect is caused by neglect, misuse, or failure to follow operating instructions where special precautions are detailed for user attention then a charge shall be made for the service call.

For example:

With the filters the user is specifically requested:• To clean filter regularly by handwashing or placing in a dishwasher at least once a month.• To turn rangehood off after each use.

Where a claim is made under warranty, CONDARI reserves the right to determine whether or not the fault is caused by faulty workmanship or material or that the part is defective.

The consumer shall be fully responsible for all expenses whatsoever incidental to the removal of parts from the unit or to their replacement. Amongst other things, such responsibility shall extend to damaged walls, tiles, fixtures and fittings whether or not the unit has been built into a cupboard and irrespective of the stage either of its installation or the fitting of any other item whatsoever in its vicinity.

No other person, or firm or corporation is authorised by Condari to offer or give on its behalf any other greater warranty that given by Condari under this warranty.


EXCLUSIONS

There are some exclusions from the Condari Pty Ltd Guarantee. (on previous page)

CONDOR Rangehoods are designed to be used over all domestic barbecues available in AUSTRALIA.

QASAIR Rangehoods are not to be used over barbecues approved for outdoor use only.

Outdoor barbecues will have a rating plate on them specifying that they are approved for outdoor use only and also a mega joule rating per burner or a total mega joule rating.

In practice any barbecue or outdoor cooking appliance over 50 mega joule will need a specially made rangehood with an air movement exceeding 2000 cubic meters per hour.

QASAIR have hoods to go over domestic cookers such as VIKING, WOLF and CAPITAL cooking appliances. These brands have a mega joule rating of up to 95 mj and therefore special hoods are required for the appliances.

CONDARI will manufacture special rangehoods to go over commercial cooking appliances situated in domestic kitchens.

Once the heat output is over 50 mega joule a special rangehood is required.


Date purchased

Purchased from

Model Serial No

The purchaser must fill in the above information and keep this with the original purchase document. This form must be produced if and when a claim is made under this warranty.

QASAIR Rangehoods are made in Ringwood, Australia.Tel: +61 3 9482 7088Fax: +61 3 9482 7011 Email: [email protected]

STANDARD WARRANTY

DISTRIBUTED IN AUSTRALIA BY CONDARI PTY LTDTel: 1300 360 563HEAD OFFICE VIC Tel: 03 9482 7088 Fax: 03 9482 7011Email: [email protected]: www.condari.com.au

YOUR DISTRIBUTORS

NSW/ACT Tel: 02 9316 4599 Fax: 02 9316 9299 Email: [email protected] Tel: 07 3423 3503 Fax: 07 3282 9122 Email: [email protected] Tel: 08 9242 5387 Fax: 08 9201 0887 Email: [email protected] SA/NT Tel: 1300 360 563 Fax: 03 9482 7011 Email: [email protected] Tel: 03 9482 7088 Fax: 03 9482 7011 Email: [email protected]

N e w Z e a l a n d Kouzina Appliances155 The Strand, ParnellAuckland New Zealand Tel: +64 9 377 7822 Fax: +64 9 377 7824 Email: [email protected]

S i n g a p o r e

Eldric Marketing Pte Ltd176 Orchard Road#05-03 Centrepoint Singapore 238843Tel: +65 6369 1188 Fax: +65 6733 8133Email: [email protected]

www.condari.com.au

QASAIR RANGEHOODS MADE IN RINGWOOD 3134CONDARI RESERVES THE RIGHT TO CHANGE SPECIFICATION WITHOUT NOTICE

rev. 072015

Qasair Installation Instructions 2015

Documents

Transcript of Qasair Installation Instructions 2015