pwd.maharashtra.etenders.in - Welcome to the e … · Web viewExcavation for foundation in Soft...

Addendum No.3

For the work of - PROVIDING INFRASTRUCTURE FOR CHANDRAPUR FOREST ADMINISTRATION DEVELOPEMENT & MANAGEMENT ACADEMY AT CHANDRAPUR TAH. DIST. CHANDRAPUR (MAHARASHTRA STATE)

E-Tender No - 66513

Name of Division - Public Works Division No 2, Chandrapur

Following Changes are made in above Tender Please Note.

Sr No Reference Of Tender

Documents

As per Uploaded tender Now Modified /Read as

1 SECTION 1 – INSTRUCTIONS

TO BIDDERS (ITB)

4.4 A. (e) Satisfactorily executed minimum quantities of following items in any continuous twelve calendar months in three years prior to current year and current year.

S. No. Item of work Quantity Unit

1Pavement Quality Concrete (PQC) M-30 and above 2676.00 Cum

2Concrete grade M-25 & above(other than PQC) 5213.00 Cum

3 TMT / HYSD Steel 1120.00 MT

4 Brick Masonry 6369.00 Cum

5 AAC Block Masonry 336.00 Cum

6 Water proofing Treatment 8250.00 Sqm

7 Gypsum Plastering 40892.00 Sqm

8 Texture Plaster 26467.00 Sqm

4.4 A. (e) Satisfactorily executed minimum quantities of following items in any continuous twelve calendar months in three years prior to current year and current year.


1Pavement Quality Concrete (PQC) M-30 and above DELETED








9 Flooring 28715.00 Sqm

10 Painting106569.0

0 Sqm

11 Anti termite treatment 27486.00 Sqm

For (c), (d) and (e) above, certificates are required to be obtained from the officer not below the rank of Executive Engineer (Work Carried out in Govt/ Semi Govt Bodies such as MHADA, MSEB, MIDC, CIDCO) or equivalent competent authority in case of local bodies. In case of other than Govt. / Semi Govt. / PSUs / Autonomous Bodies etc., certificates are required to be obtained from Director / CEO / or Officer in Charge of Project or equivalent.

For (e) above, the other than Govt. / Semi Govt. works the criteria of quantities above shall be double of the mentioned above.


10 Painting 106569.00 Sqm


For (c), (d) and (e) above, certificates are required to be obtained from the officer not below the rank of Executive Engineer (Work Carried out in Govt/ Semi Govt Bodies such as MHADA, MSEB, MIDC, CIDCO) or equivalent competent authority in case of local bodies. In case of other than Govt. / Semi Govt. / PSUs / Autonomous Bodies etc., certificates are required to be obtained from Director / CEO / or Officer in Charge of Project or equivalent.

For (e) above, the other than Govt. / Semi Govt. works the criteria of quantities above shall be double of the mentioned above.

2 APPENDIX TO ITB

Sr No Description Clause Reference

With respect to Section – I.

5 Quantities of work are

………………….

[Cl. 4.4 A (e)]


1Pavement Quality Concrete (PQC) M-30 and above 2676.00 Cum

Sr No Description Clause Reference

With respect to Section – I.

5 Quantities of work are

………………….

[Cl. 4.4 A (e)]


1Pavement Quality Concrete (PQC) M-30 and above DELETED

2 Concrete grade M-25 & 5213.00 Cum











above(other than PQC)










3 ANNEXURE-I List of Key Plant &Equipment deployed on Contract Work [Reference Cl. 4.4 (B) (a)]

Sl. Type of Equipment Maximum age as on 1.4.2017 (Years)

Nos. / Capacity

1. Cement Concrete batch mix plant 30m3/hr with scada

15 Years 1

2. Truck mounted transit mixture with concrete pump

15 Years 4

3. Complete steel staging and shuttering materials.

3 Years 10000 Sq Mt

List of Key Plant &Equipment deployed on Contract Work [Reference Cl. 4.4 (B) (a)]

Sl. Type of Equipment Maximum age as on 1.4.2017 (Years)

Nos. / Capacity

1. Cement Concrete batch mix plant minimum capacity 20-30 m3/hr with scada

15 Years 1

2. Truck mounted transit mixture 15 Years 4

3. Complete steel staging and shuttering materials.

3 Years 10000 Sq Mt

4. Truck & Tipper 15 Years 4

5 Water Tanker 15 Years 4

Note:

1. The bidder shall submit documentary evidence of ownership of above machineries.

2. Allowable life of machinery to be used on works –(a) The life of new machinery will be considered

as 15 years.(b) There will be no need of checking by SE

(Mechanical) for first 6 years.(c) After 6th year, the machinery shall be checked

and certified for its fitness by SE Mechanical / ACE (Mechanical) every 3rd year till the 15th

year.After the 15th year, the contractor will get machinery certified every year from SE/ACE (Mechanical) and produce the certificate of fitness. The certificate will be required for machinery where it is necessary and not issued by RTO.

Lowest bidder shall submit such certificate of fitness by SE / ACE (Mechanical) within one month of opening of financial bid.

4. Truck & Tipper 15 Years 4

5 Water Tanker 15 Years 4

6 Concrete Pump 15 Years 1

Note:

1. The bidder shall submit documentary evidence of ownership of above machineries under Sr. No. 1, 2,3 & 6.

2. For machineries under Sr.No.4 & 5 documentary evidence of ownership or undertaking to hire shall be submitted.(This hire agreement should be notarized and it should be clearly mentioned that from whom the machinery shall be hired and the period for which the machinery shall be hired. Upload the machinery’s original bill with hire agreement.)

3. Allowable life of machinery to be used on works –(a) The life of new machinery will be considered as 15

years.(b) There will be no need of checking by SE (Mechanical)

for first 6 years.(c) After 6th year, the machinery shall be checked and

certified for its fitness by SE Mechanical / ACE (Mechanical) every 3rd year till the 15th year.

After the 15th year, the contractor will get machinery certified every year from SE/ACE (Mechanical) and produce the certificate of fitness. The certificate will be required for machinery where it is necessary and not issued by RTO.Lowest bidder shall submit such certificate of fitness by SE / ACE (Mechanical) within one month of opening of financial bid.

4 SECTION 3CONDITIONS OF

CONTRACT

45.0 Tax 45.1 The rates quoted by the Contractor shall be deemed to be inclusive of the sales and other taxes that the Contractor will have to pay for the performance of this Contract. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law.

45.0 Tax 45.1 The rates quoted by the Contractor shall be deemed to be inclusive of the sales and other taxes that the Contractor will have to pay for the performance of this Contract. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law.

Contractor shall quote his rate considering all taxes, labour welfare cess applicable from time to time and GST imposed by Government from 1.07.2017 on all Government contracts / contractors. No claim of contractor on account of Reimbursement of these taxes and GST applicable shall be entertained.

Contractor shall quote his rate considering all taxes, labour welfare cess applicable from time to time and GST imposed by Government from 1.07.2017 on all Government contracts / contractors. As per Government of Maharashtra, Public Works Department, Govt. Circular No. Sankirna-2017/C.R. 121(Part-II)/ Building-2 Dated 19/09/2017.

(Please Read Section-5 of SBD as Below)SECTION – 5 TECHNICAL SPECIFICATION

(from Page No.91 to 158)

SR. No. ITEM OF WORK Standard Specifications as per Specification Book published by Govt. of Maharashtra Volume I-1979 and Volume-II 1981 Edition

Additional Specifications if any

Specification No. Page No.1 Excavation for foundation in earth, soil of all

types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means.

Bd.A.1 259 The useful excavated materials shall be utilised as directed by the Engineer In Charge

1.1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. b. Lift from 1.50m to 3.00

Bd.A.1 259 The useful excavated materials shall be utilised as directed by the Engineer In Charge

2 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Mean- A. Lift upto 1.50m

Bd.A.2 259 The useful excavated materials shall be utilised as directed by the Engineer in charge.

2.1 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Mean- B. Lift from 1.50m to 3.00

Bd.A.2 259 The useful excavated materials shall be utilised as directed by the Engineer In Charge.

3 Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Manual Means


3.1 Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. By Manual Means B. From 1.50m. TO 3.00m.


4 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Manual Means


4.1 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete B. From 1.50m. TO 3.00m.


5 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

Bd.A. 10 262 As directed by Engineer in charge.

6 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete.

Bd.A. 11 263 As directed by Engineer in charge.Contractor shall have to use Fly ash for plinth filling if Engineer in charge directs so and rate shall be reduced accordingly at the time of payment

7 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Bd.A. 12 264 As directed by Engineer in charge.

8 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.- GROUND FLOOR

Bd. C. 3 275 As directed by Enginee incharge. Drawings are available on online portal. Additional Drawings if required are available at office of the Executive Engineer, P. W. Division No.2, Chandrapur

8.1 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.- THIRD FLOOR


9 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.- GROUND FLOOR


9.1 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.-THIRD FLOOR


10 Providing and Laying in situ cement concrete M-10 (1:3:6) of trap/granite /quartzite/gneiss metal for foundation And bedding including pywwod/steel formork, bailing out water, compacting ,finishing uneven and honeycombed surfaces cement etc. complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surfaces only Newly laid concrete shall be covered by gunny bag,plastic Tarpaulin,Etc. (Wooden Centering Not Allowed) Newly laid concrete shall be covered by gunny bag,plastic Tarpaulin,Etc. (Wooden Centering Not Allowed)

Bd.E.1 287-288 The ingradient material shall be tested as per quality control norms.

11 Providing and casting in situ cement concrete of M-25 grade of trap / granite /quartzite/ gneiss metal in foundations like raft grillages strip foundations and footings of R.C.C. column steel stanchions including bailing out water plywood / steel formwork compaction curing and roughning the surfaces if special finish to be provided finishing neven and honeycombed surfaces with c.m. 1:3 of sufficient minium thickness to give snooth and even surface etc. complete.(Excluding reinforcement and structural steel with cover block).

Bd.F.3 B-7

298 38-40

1.The mix design shall be got prepared from the approved government laboratory well in advance and got approved from Engineer in charge before starting the work.2. The rate of consumption of cement in mix design are considered for the work as per general practice in actual design ,if the cement consumption is less than that shown in item,the rate will be reduced accordingly .If the rate as per mix design for cement consumption is more than that as per item ,the extra cement will have to be borned by the contractor.3. Before concreting work, cement form each consignment shall be got tested .if the strength of fresh cement available in stock and concreting work shall be done accordingly to modified mix design.4. The minimum strength of reinforced cement concrete to ensure durability shall as per IS 456-2000 with latest ammendment.

12 Providing and casting in situ cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- GROUND FLOOR

Bd.F.5 B-7

30038-40

Same as above.

12.1 Providing and casting in situ cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- FIRST FLOOR

Bd.F.5 B-7

30038-40

Same as above.

12.2 Providing and casting in situ cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- SECOND FLOOR

Bd.F.5 B-7

30038-40

Same as above.

12.3 Providing and casting in situ cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- THIRD FLOOR

Bd.F.5 B-7

30038-40

Same as above.

13 Providing and casting in situ cement concrete in M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- GROUND FLOOR

Bd.F.6 B-7

30038-40

Same as above.

13.1 Providing and casting in situ cement concrete in M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- FIRST FLOOR

Bd.F.6 B-7

30038-40

Same as above.

13.2 Providing and casting in situ cement concrete in M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.-SECOND FLOOR

Bd.F.6 B-7

30038-40

Same as above.

13.3 Providing and casting in situ cement concrete in M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- THIRD FLOOR

Bd.F.6 B-7

30038-40

Same as above.

14 Providing & casting in situ cement concrete M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting , curing , finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- GROUND FLOOR

Bd.F.9 B-7

300-30438-40

Same as above.

14.1 Providing & casting in situ cement concrete M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting , curing , finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.-FIRST FLOOR

Bd.F.9 B-7

300-30438-40

Same as above.

14.2 Providing & casting in situ cement concrete M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting , curing , finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- SECOND FLOOR

Bd.F.9 B-7

300-30438-40

Same as above.

14.3 Providing & casting in situ cement concrete M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting , curing , finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- THIRD FLOOR

Bd.F.9 B-7

300-30438-40

Same as above.

15 GROUNDProviding and casting in situ cement concrete M25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- FLOOR

Bd.F.8 B-7

302-30338-40

Same as above.

15.1 Providing and casting in situ cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- FIRST FLOOR

Bd.F.8 B-7

302-30338-40

Same as above.

15.2 Providing and casting in situ cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- SECOND FLOOR

Bd.F.8 B-7

302-30338-40

Same as above.

15.3 Providing and casting in situ cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- THIRD FLOOR

Bd.F.8 B-7

302-30338-40

Same as above.

15 A Providing and casting in situ cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- GROUND FLOOR

Bd.F.8 B-7

302-30338-40

Same as above.

15 A 1 Providing and casting in situ cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- FIRST FLOOR

Bd.F.8 B-7

302-30338-40

Same as above.

15 A 2 Providing and casting in situ cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. - SECOND FLOOR

Bd.F.8 B-7

302-30338-40

Same as above.

15 A 3 Providing and casting in situ cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- THIRD FLOOR

Bd.F.8 B-7

302-30338-40

Same as above.

16 Providing and casting in situ cement concrete in M25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)- GROUND FLOOR

Bd.F.13 B-7

30538-40

Same as above.

16.1 Providing and casting in situ cement concrete in M25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)- FIRST FLOOR

Bd.F.13 B-7

30538-40

Same as above.

16.2 Providing and casting in situ cement concrete in M25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)- SECOND FLOOR

Bd.F.13 B-7

30538-40

Same as above.

16.3 Providing and casting in situ cement concrete in M25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding rreinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)- THIRD FLOOR

Bd.F.13 B-7

30538-40

Same as above.

17 Providing and casting in situ cement concrete in M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blockscompacting , curing , finishing & roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.With natural sand- GROUND FLOOR

Bd.F.11 B-7

30438-40

Same as above.

17.1 Providing and casting in situ cement concrete in M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blockscompacting , curing , finishing & roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.With natural sand- FIRST FLOOR

Bd.F.11 B-7

30438-40

Same as above.

17.2 Providing and casting in situ cement concrete in M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blockscompacting , curing , finishing & roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.With natural sand- SECOND FLOOR

Bd.F.11 B-7

30438-40

Same as above.

17.3 Providing and casting in situ cement concrete in M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blockscompacting , curing , finishing & roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.With natural sand- THIRD FLOOR

Bd.F.11 B-7

30438-40

Same as above.

18 Providing and casting in situ cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)- GROUND FLOOR

Bd.F.12 B-7

30438-40

Same as above.

18.1 Providing and casting in situ cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)- FIRST FLOOR

Bd.F.12 B-7

30438-40

Same as above.

18.2 Providing and casting in situ cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)- SECOND FLOOR

Bd.F.12 B-7

30438-40

Same as above.

18.3 Providing and casting in situ cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)-THIRD FLOOR

Bd.F.12 B-7

30438-40

Same as above.

19 Providing and fixing in position TMT / HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs,

Bd.F.17 306 1. As per Indian Standard 1786/1985 with latest amendments.

beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed- GROUND FLOOR

2. Various diameter meters of TMT Fe-500 bars brought on site for the work shall be got tested categorywise and lotwise as directed by the Engineer in Charge . 3. Rerolled steel shall not be used.

19.1 Providing and fixing in position TMT / HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed- FIRST FLOOR

Bd.F.17 306 1.As per Indian Standard 1786/1985 with latest amendments.2.Various diameter meters of TMT Fe-500 bars brought on site for the work shall be got tested categorywise and lotwise as directed by the Engineer in Charge . 3. Rerolled steel shall not be used.

19.2 Providing and fixing in position TMT / HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed -SECOND FLOOR


19.3 Providing and fixing in position TMT / HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed- THIRD FLOOR


20 Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.- GROUND FLOOR

BD. G 2 313-314 1. The brick work shall be cured for a minimum period of 14 days.2. The joints on both faces shall be raked to a depth of not less than the thickness of joints for affording good bond for palster.

21 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete- GROUND FLOOR

BD. G 5 315 1. The brick work shall be cured for a minimum period of 14 days.2. The joints on both faces shall be raked to a depth of not less than the thickness of joints for

affording good bond for palster.

21.1 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete- FIRST FLOOR

BD. G 5 315 1. The brick work shall be cured for a minimum period of 14 days.2. The joints on both faces shall be raked to a depth of not less than the thickness of joints for affording good bond for palster.

21.2 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete - SECOND FLOOR


21.3 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete- THIRD FLOOR


22 Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) 1984, of size 500mm x 200mm x 150mm in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) 1972) 150 mm thick- GROUND FLOOR

As directed by Engineer-in-charge.The test shall be carried out conformingto IS:6441 (Part I) - 1972)

22.1 Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) 1984, of size 500mm x 200mm x 150mm in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) 1972) 150 mm thick- FIRST FLOOR


22.2 Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) 1984, of size 500mm x 200mm x 150mm in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) 1972) 150 mm thick- SECOND FLOOR


22.3 Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) 1984, of size 500mm x 200mm x 150mm in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) 1972) 150 mm thick- THIRD FLOOR


23 Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.

BD. G 7 316-317 1. The brick work shall be cured for a minimum period of 14 days.2. The joints on both faces shall be raked to a depth of not less than the thickness of joints for affording good bond for palster.

24 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/ including ponding test etc. complete- GROUND FLOOR

The work shall be carried out as per direction of Engineer in charge.

24.1 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including


finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/ including ponding test etc. complete- FIRST FLOOR

24.2 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/ including ponding test etc. complete- SECOND FLOOR


24.3 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and


covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/ including ponding test etc. complete- THIRD FLOOR

25 Providing and laying jointless PolydeeLM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP42Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of PolydeeLM @ 700 gms/sqm and applying 2nd coat of PolydeeLM @ 700 gms/sqm and finishing the same with sprinkling the AG10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/ etc. complete.- GROUND FLOOR


25.1 Providing and laying jointless PolydeeLM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP42Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of PolydeeLM @ 700 gms/sqm and applying 2nd coat of PolydeeLM @ 700 gms/sqm and finishing the same with sprinkling the AG10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/ etc. complete.- FIRST FLOOR


25.2 Providing and laying jointless PolydeeLM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP42Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of PolydeeLM @ 700 gms/sqm and applying 2nd coat of PolydeeLM @ 700 gms/sqm and finishing the same with sprinkling the AG10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/ etc. complete.- SECOND FLOOR


25.3 Providing and laying jointless PolydeeLM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP42Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of PolydeeLM @ 700 gms/sqm and applying 2nd coat of PolydeeLM @ 700 gms/sqm and finishing the same with sprinkling the AG10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/ etc. complete.- THIRD FLOOR


26 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/ including ponding test etc. complete.- GROUND FLOOR


26.1 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/ including ponding test etc. complete.- FIRST FLOOR


26.2 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/ including ponding test etc. complete.- SECOND FLOOR


26.3 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/ including ponding test etc. complete.- THIRD FLOOR


27 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.. In ceiling- GROUND FLOOR

Bd. L.1 367 The work shall be carried out as per direction of Engineer in charge.

27.1 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.. In ceiling- FIRST FLOOR


27.2 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.. In ceiling- SECOND FLOOR


27.3 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.. In ceiling- THIRD FLOOR


28 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete.- GROUND FLOOR


28.1 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete - FIRST FLOOR


28.2 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- SECOND FLOOR


28.3 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- THIRD FLOOR


29 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- GROUND FLOOR


29.1 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- FIRST FLOOR


29.2 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- SECOND FLOOR


29.3 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- THIRD FLOOR


30 Providing and applying gypsum plaster (with Gypsum material of Gypsum India / Mega Sign or equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete.- GROUND FLOOR

The work shall be carried out as directed by Engineer in charge.

30.1 Providing and applying gypsum plaster (with Gypsum material of Gypsum India / Mega Sign or equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete.- FIRST FLOOR


30.2 Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.- SECOND FLOOR


30.3 Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete.- THIRD FLOOR


31 Providing external cement plaster in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced / funty plaster treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding etc.complete.- GROUND FLOOR


31.1 Providing external cement plaster in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced / funty plaster treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding etc.complete.- FIRST FLOOR


31.2 Providing external cement plaster in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced / funty plaster treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding etc.complete.- SEOND FLOOR


31.3 Providing external cement plaster in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced / funty plaster treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding etc.complete - THIRD FLOOR


32 Providing and applying Texture plaster with finishing with Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)- GROUND FLOOR

As directed by Engineer-in-charge.

32.1 Providing and applying Texture plaster with finishing with Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)- FIRST FLOOR


32.2 Providing and applying Texture plaster with finishing with Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)- SEOND FLOOR


32.3 Providing and applying Texture plaster with finishing with Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)- THIRD FLOOR


33 Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete

Bd. M.3 380 1) The work shall be carried out as directed by Engineer-in-charge. 2) Samples of Kotah Stone slab shall be got approved from the competent authority before execution of this item.

34 Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally /square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Natural Sand

Bd. M.7 383 The work shall be carried out as directed by Engineer-in-charge.

36 Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 45 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.- GROUND FLOOR

Bd. M.13 386 1) The work shall be carried out as directed by Engineer-in-charge. 2) Samples of tiles shall be got approved from the competent authority before execution of this item.

36.1 Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 45 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.- FIRST FLOOR


36.2 Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 45 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.- SEOND FLOOR


36.3 Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 45 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.- THIRD FLOOR


37 Providing and laying marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for flooring in required pattern on bed of C.M. 1:6 including neat white / coloured cement slurry , curing polishing, cleaning complete.(White makrana marble)

Bd. M.16 387 1) The work shall be carried out as directed by Engineer-in-charge. 2) Samples of marble slab shall be got approved from the competent authority before execution of this item.

38 Providing and laying marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for flooring in required pattern on bed of C.M. 1:6 including neat white / coloured cement slurry , curing polishing, cleaning complete.(Other than white makrana marble)- GROUND FLOOR


38.1 Providing and laying marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for flooring in required pattern on bed of C.M. 1:6 including neat white / coloured cement slurry , curing polishing, cleaning complete.(Other than white makrana marble)- FIRST FLOOR


38.2 Providing and laying marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for flooring in required pattern on bed of C.M. 1:6 including neat white / coloured cement slurry , curing polishing, cleaning complete.(Other than white makrana marble)- SEOND FLOOR


39 Providing and fixing marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for dado and skirting after making the required portion in level, in cement plaster 1:4 and fixing the slabs with ready made adhesive including filling joints with neat approved coloured cement slurry, curing polishing, cleaning complete.(White makrana marble)


40 Providing and fixing marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for dado and skirting after making the required portion in level, in cement plaster 1:4 and fixing the slabs with ready made adhesive including filling joints with neat approved coloured cement slurry, curing polishing, cleaning complete.(Other than white makrana marble)- GROUND FLOOR


40.1 Providing and fixing marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for dado and skirting after making the required portion in level, in cement plaster 1:4 and fixing the slabs with ready made adhesive including filling joints with neat approved coloured cement slurry, curing polishing, cleaning complete.(Other than white makrana marble)- FIRST FLOOR


40.2 Providing and fixing marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for dado and skirting after making the required portion in level, in cement plaster 1:4 and fixing the slabs with ready made adhesive including filling joints with neat approved coloured cement slurry, curing polishing, cleaning complete.(Other than white makrana marble)- SEOND FLOOR


41 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.- GROUND FLOOR

Bd. M.3 380 1) The work shall be carried out as directed by Engineer-in-charge. 2) Samples of granite slab shall be got approved from the competent authority before execution of this item.

41.1 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.- FIRST FLOOR


41.2 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.- SECOND FLOOR


41.3 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.- THIRD FLOOR


42 Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete- GROUND FLOOR

Bd. M.12 385 As directed by Engineer-in-charge.

42.1 Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete- FIRST FLOOR


42.2 Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete- SECOND FLOOR


42.3 Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete- THIRD FLOOR


43 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.- GROUND FLOOR


43.1 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.- FIRST FLOOR


43.2 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.- SECOND FLOOR


43.3 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.- THIRD FLOOR


44 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish- GROUND FLOOR


44.1 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish- FIRST FLOOR


44.2 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish- SECOND FLOOR

. As directed by Engineer-in-charge.

45 Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete-GROUND FLOOR


45.1 Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete-FIRST FLOOR


46 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.- GROUND FLOOR


46.1 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.- FIRST FLOOR


46.2 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.- SECOND FLOOR


46.3 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.- THIRD FLOOR


47 Providing and laying vitrified mirror / glossy finish tiles decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring- GROUND FLOOR

Bd. M.12 385 1) The work shall be carried out as directed by Engineer in charge.2) Sample of tiles shall be got approved from the competent authority.

47.1 Providing and laying vitrified mirror / glossy finish tiles decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring- FIRST FLOOR


47.2 Providing and laying vitrified mirror / glossy finish tiles decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring- SECOND FLOOR


47.3 Providing and laying vitrified mirror / glossy finish tiles decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring- THIRD FLOOR


48 Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting - GROUND FLOOR


48.1 Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting- FIRST FLOOR


48.2 Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting- SECOND FLOOR


48.3 Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting- THIRD FLOOR


49 Providing and laying vitrified matt fininsh tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring- GROUND FLOOR


49.1 Providing and laying vitrified matt fininsh tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring- FIRST FLOOR


49.2 Providing and laying vitrified matt fininsh tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring- SECOND FLOOR


49.3 Providing and laying vitrified matt fininsh tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring- THIRD FLOOR


50 Providing and laying vitrified stone effect finish tiles of RAK/Kajaria/ Nitco/ Asian or equivalent make having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring


51 Providing and laying vitrified stone effect finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting


52 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. completee- GROUND FLOOR

As directed by Engineer in charge.





53.2 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.- SECOND FLOOR




54 Providing Chamfer Of Required size to granite stone including fine polishing and cleaning etc. complete.- GROUND FLOOR


54.1 Providing Chamfer Of Required size to granite stone including fine polishing and cleaning etc. complete.- FIRST FLOOR


54.2 Providing Chamfer Of Required size to granite stone including fine polishing and cleaning etc. complete.- SECOND FLOOR


54.3 Providing Chamfer Of Required size to granite stone including fine polishing and cleaning etc. complete.- THIRD FLOOR


55 Providing Sills of various material 20 mm to 25 mm thick on a bed of C.M. 1:4 including cement float , filling joints with neat cement slurry curing polishing rounding edges cleaning etc. complete Granite- GROUND FLOOR

Bd. M. 29 391 As directed by Engineer in charge.

55.1 Providing Sills of various material 20 mm to 25 mm thick on a bed of C.M. 1:4 including cement float , filling joints with neat cement slurry curing polishing rounding edges cleaning etc. complete Granite- FIRST FLOOR


55.2 Providing Sills of various material 20 mm to 25 mm thick on a bed of C.M. 1:4 including cement float , filling joints with neat cement slurry curing polishing rounding edges cleaning etc. complete Granite- SECOND FLOOR


55.3 Providing Sills of various material 20 mm to 25 mm thick on a bed of C.M. 1:4 including cement float , filling joints with neat cement slurry curing polishing rounding edges cleaning etc. complete Granite- THIRD FLOOR


56 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.- GROUND FLOOR


56.1 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.- FIRST FLOOR


56.2 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.- SECOND FLOOR


56.3 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.- THIRD FLOOR


57 Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete- GROUND FLOOR

Bd. P. 6 414 As directed by Engineer in charge.

57.1 Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete- FIRST FLOOR


57.2 Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete- SECOND FLOOR


57.3 Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete- THIRD FLOOR


58 Providing and applying two coats of Appex Ultima white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.- GROUND FLOOR


58.1 Providing and applying two coats of Appex Ultima white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.- FIRST FLOOR


58.2 Providing and applying two coats of Appex Ultima white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.- SECOND FLOOR


58.3 Providing and applying two coats of Appex Ultima white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.- THIRD FLOOR


59 Providing and fixing Green colour coated Zincalume ( R ) AZ150 (min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium ¬Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950¬-1050 mm effective cover width and nominal 25¬30 mm deep ribs with subtle square fluting in the five pan at nominal 180¬-250 mm center¬ to ¬center. The end rib shall be designed for anti¬capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc¬Tin alloy coated, Hex head, self¬drilling screw etc. complete. (weight of profile 4.52 kg/sqm)


60 Providing and fixing Green colour coated Zincalume ( R ) AZ150 (min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium ¬Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950¬-1050 mm effective cover width and nominal 25¬30 mm deep ribs with subtle square fluting in the five pan at nominal 180¬-250 mm center¬ to ¬center. The end rib shall be designed for anti¬capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval.


Including fasteners with min. fastened with min. 25 um Zinc¬Tin alloy coated, Hex head, self¬drilling screw etc. complete. (weight of profile 4.52 kg/sqm).- GROUND FLOOR

60.1 Providing and fixing Green colour coated Zincalume ( R ) AZ150 (min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium ¬Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950¬-1050 mm effective cover width and nominal 25¬30 mm deep ribs with subtle square fluting in the five pan at nominal 180¬-250 mm center¬ to ¬center. The end rib shall be designed for anti¬capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc¬Tin alloy coated, Hex head, self¬drilling screw etc. complete. (weight of profile 4.52 kg/sqm)..- SECOND FLOOR


61 Providing and fixing in position structural glazing consisting of main frame of powder coated jindal or equivalent make alluminium curain wall section 48 x 64 mm &sub frame of 25 x 25 x 2 mm powder coated alluminium SHS by using structural silicon of Dow Corring 995 weather silicon coirining 785, Spacer tape 6 mm x 6 mm excluding glass inclusive of labour etc.(With Glass)

As directed by Engineer in charge.Drawings are available on online portal. Additional Drawings if required are available at office of the Executive Engineer, P.W.Division No.2, Chandrapur

62 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour anodisedwith box- GROUND FLOOR


62.1 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour anodisedwith box- FIRST FLOOR


62.2 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour anodized with box- SECOND FLOOR


62.3 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour anodisedwith box- THIRD FLOOR


63 Providing and fixing in position Colour anodized coated aluminium louvered windows / ventilator of various sizes with Colour anodised as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.- GROUND FLOOR


63.1 Providing and fixing in position Colour anodized coated aluminium louvered windows / ventilator of various sizes with Colour anodised as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc.


complete.- FIRST FLOOR63.2 Providing and fixing in position Colour anodized

coated aluminium louvered windows / ventilator of various sizes with Colour anodised as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.- SECOND FLOOR


63.3 Providing and fixing in position Colour anodized coated aluminium louvered windows / ventilator of various sizes with Colour anodised as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.- THIRD FLOOR


64 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.- GROUND FLOOR

Bd. U. 1 537 As directed by Engineer in charge.

64.1 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.- FIRST FLOOR


64.2 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.- SECOND FLOOR


64.3 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.- THIRD FLOOR


65 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 63.5mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 3.3m center to center and two pipes of 12mm diameter fixed horizontally including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete.Note For item no. 58 to 60 prior approval of Superintending Engineer will be required- GROUND FLOOR

As directed by Engineer in charge. Drawings are available on online portal. Additional Drawings if required are available at office of the Executive Engineer, P.W.Division No.2, Chandrapur

65.1 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 63.5mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 3.3m center to center and two pipes of 12mm diameter fixed horizontally including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete.Note For item no. 58 to 60 prior approval of Superintending Engineer will be required- FIRST FLOOR


65.2 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 63.5mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 3.3m center to center and two pipes of 12mm diameter fixed horizontally including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete.Note For item no. 58 to 60 prior approval of Superintending Engineer will be required- SECOND FLOOR


65.3 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 63.5mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 3.3m center to center and two pipes of 12mm diameter fixed horizontally including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete.Note For item no. 58 to 60 prior approval of Superintending Engineer will be required- THIRD FLOOR


66 Providing and fixing mat finish stainless steel lettering of various heights as directed by enginner incharge including material, labour, cleaning etc. complete.(From 30 to 45 cm height)


67 Providing preconstructional antitermite treatment as per I.S. 6313 (PartII) treatment by treating the backfill in immediate contact with foundation/ plinth filling top at the rate of 5 litres of emulsion concentrate of 0.5 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. ( AS per Item no. 22.42 of schedule of rates of NBO ) To add Chemicals as directed if necessary- GROUND FLOOR

1) The work shall be carried out as directed by Engineer in charge.2) If the use of any chemical is found banned by the Government, proper substitute chemical will be allowed to be used as per manufacturers code of practice. The chemical shall be got approved from Engineer in charge.

68 Providing preconstructional/ postconstructional antitermite treatment as per I.S. 6313 (PartI) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 60 cm deep at 15 cm c/c as close to the wall as possible & to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling & covering 10 years guarantee on bond paper. ( AS per Item no. 22.44 of schedule of rates of NBO ) To add Chemicals as directed if necessary- GROUND FLOOR

1) The work shall be carried out as directed by Engineer in charge.2) If the use of any chemical is found banned by the Government, proper substitute chemical will be allowed to be used as per manufacturers code of practice. The chemical shall be got approved from Engineer in charge.

69 Removing Manglore tiled roof and ridge tiles with battens, ridge and barge boards, eaves boards etc. and stacking the materials as directed with all leads and lifts complete. Including removing wood work below


70 Removing G.I. and A.C sheet roof covering and stacking them as and where directed in the compound, including scaffolding etc. complete.


71 Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete


72 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete


73 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete


74 Dismantling brick masonry in Mud and stacking the materials as directed with all leads lifts etc. complete


75 Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etc. complete


76 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.


77 Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete.


78 Conveying materials including all lifts, laying in layers, breaking clods, dressing to the required lines, curves, grades and section for a lead of over2km inclusive from the site of excavation to the site of deposition as directed.


79 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs.100/ with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )- GROUND FLOOR


80 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/ with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )- GROUND FLOOR


81 Providing and applying a base coat comprising of 1 Kg Polydee MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP40 and after drying, applying Polydee11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/ etc. complete.- GROUND FLOOR


81.1 Providing and applying a base coat comprising of 1 Kg Polydee MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP40 and after drying, applying Polydee11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/ etc. complete.- FIRST FLOOR


81.2 Providing and applying a base coat comprising of 1 Kg Polydee MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP40 and after drying, applying Polydee11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/ etc. complete.- SECOND FLOOR


81.3 Providing and applying a base coat comprising of 1 Kg Polydee MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP40 and after drying, applying Polydee11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/ etc. complete.- THIRD FLOOR


82 Providing and fixing Italian glass mosaic tiles in gradation pattern as directed by engineer incharge in required position with redimade glass mosaic adhesive and grout on 12 mm thick cement plaster of C.M. 1:4 and neat cement float including filling joints, curing and cleaning etc. complete.- GROUND FLOOR


83 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)- GROUND FLOOR


84 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete.- GROUND FLOOR

Bd. H.1 329 As directed by Engineer in charge.

85 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete.- GROUND FLOOR

Bd. H.4 331 As directed by Engineer in charge.

86 Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete- GROUND FLOOR

Bd. L. 15 372 As directed by Engineer in charge.

87 Providing and laying in situ cement concrete M¬20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer . With natural sand.- GROUND FLOOR

Bd. E.4B 7

28938-40


88 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means

MORTH CL. 301


89 Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. By Manual Means

MORTH CL. 301


92 Providing dry rubble stone pitching 23 cm (about 9" ) thick including all material, quarry spalls, labour etc. complete.

Rd.73 246 As directed by Engineer in charge.

93 Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm 8 guage thick and fixed 75 mm above Ground level on vertical M.S Angle of 40 x 40 x 6 mm size including excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M.c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm Angles both sides at every corner or bends embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.


94 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete - GROUND FLOOR


95 Flooring in Granite - Providing and Fixing machine cut Stone (Leather Finished Telephone Black Granite or any other as per selection) out of 450 X 1800 x 18 mm size, for flooring on cm (1:4) bed with curing, including all wastage, breakage etc. complete




97 Providing and fixing following rough finished machine cut stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thk bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.- Shahabad leather finished machine cut 30mm thick


97.1 Providing and fixing following rough finished machine cut stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thk bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.- Shahabad leather finished machine cut 50mm thick


97.2 Providing and fixing following rough finished machine cut stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thk bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.- Kaddapa leather finished machine cut 25mm thick


97.3 Providing and fixing following rough finished machine cut stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thk bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.- Kaddapa leather finished machine cut 50mm thick


97.4 Providing and fixing following rough finished machine cut stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thick bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.- Black Granite leather finished 30mm thick




98 Proving and laying rough finished machine cut Stone flooring of approved shade and quality, 20 to 25 mm thick of required size in plain pattern at required location, level, slope as directed on a bed of 20 mm thick cement mortar 1:4 including, removing mortar, concrete, droppings, dust, loose particles, debris etc. cleaning and wetting base surface, cement float filling joints with neat cement slurry, pigment, curing, cutting, dressing, as directed washing and cleaning etc. complete. as per detailed drawing and design and as directed by Engineer in charge.- Shahabad leather finished machine cut (300 X 300) 30mm thick


98.1 Proving and laying rough finished machine cut Stone flooring of approved shade and quality, 20 to 25 mm thick of required size in plain pattern at required location, level, slope as directed on a bed of 20 mm thick cement mortar 1:4 including, removing mortar, concrete, droppings, dust, loose particles, debris etc. cleaning and wetting base surface, cement float filling joints with neat cement slurry, pigment, curing, cutting, dressing, as directed washing and cleaning etc. complete. as per detailed drawing and design and as directed by Engineer in charge.- Kadappa stone (600X600) leather finished machine cut 30 mm thick


99 Providing and fixing following rough finished hand tooled cobblestones 100 x 100 x 100 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge. - Granite Stone Cobbles.


99.1 Providing and fixing following rough finished hand tooled cobblestones 100 x 100 x 100 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge. - Kadappa Stone Cobbles.


100 Providing and fixing following rough finished hand tooled cobblestones 150 x 150 x 150 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge.- Granite Stone Cobbles.




101 Providing and fixing following rough finished hand tooled cobblestones 150 x 150 x 150 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge.


101.1 Providing and fixing following rough finished hand tooled cobblestones 150 x 150 x 150 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge.


102 Providing and fixing 20 mm thick following rough finished machine cut stone in Butching pattern of 75 mm width laid on layers as per detailed drawing and design and in required position. Stone fixing to be done in C.M. 1:4 (thickness of mortar at backing is 10 mm and in between stone is 6 mm.), with neat cement float including. filling joints with neat cement, cutting the stone if necessary, all specials like round edge tiles, curing, pignent, and cleaning washing etc complete.- Sahabad rough finished machine cut - 30mm thick


102.1 Providing and fixing 20 mm thick following rough finished machine cut stone in Butching pattern of 75 mm width laid on layers as per detailed drawing and design and in required position. Stone fixing to be done in C.M. 1:4 (thickness of mortar at backing is 10 mm and in between stone is 6 mm.), with neat cement float including. filling joints with neat cement, cutting the stone if necessary, all specials like round edge tiles, curing, pignent, and cleaning washing etc complete. - Kadappa rough finished machine cut - 30mm thick


102.2 Providing and fixing 20 mm thick following rough finished machine cut stone in Butching pattern of 75 mm width laid on layers as per detailed drawing and design and in required position. Stone fixing to be done in C.M. 1:4 (thickness of mortar at backing is 10 mm and in between stone is 6 mm.), with neat cement float including. filling joints with neat cement, cutting the stone if necessary, all specials like round edge tiles, curing, pignent, and cleaning washing etc complete. - Leather Finished Granite - 18 mm thick


103 Flooring and Wall Cladding in upto7mm GRIT Finish - Providing and apllying Grit Finish to walls or floor in designed patterns, sizes of panels etc, using type and size of Chips as per specifications, in cement grout of colour as per design, with material, labour, raking of grout etc complete as per directions of Site Engineer.- Grit Plaster - Kota Chips 5 mm size


103.1 Flooring and Wall Cladding in upto7mm GRIT Finish - Providing and apllying Grit Finish to walls or floor in designed patterns, sizes of panels etc, using type and size of Chips as per specifications, in cement grout of colour as per design, with material, labour, raking of grout etc complete as per directions of Site Engineer. - Grit Plaster - Black Basalt Chips3 to 5 mm size


103.02 Flooring and Wall Cladding in upto7mm GRIT Finish - Providing and apllying Grit Finish to walls or floor in designed patterns, sizes of panels etc, using type and size of Chips as per specifications, in cement grout of colour as per design, with material, labour, raking of grout etc complete as per directions of Site Engineer. - Grit Plaster - Kadappa Chips 5 mm size


104 Providing and fixing of river pebbles of size 40-50 mm finishing to the inner surface of pebbles drain which shall be embedded in plain cement concrete of 1:4:8 of 100 mm thick as per detailed drawing and design in required position, slope, curve after making the surface to required level and maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge.


105 Providing and fixing rough finished machine cut Kadappa Stone Kerb of approved colour and 285 x 450 x 50 mm thick embedded in PCC bedding as per detailed drawing and design and in required position after making the surface to required level in C.M. 1:4 and fixing the Stone Kerb with fine and uniform joint, joints filled with fine sand and neat cement, securing the free ends, maintaining the share curves, lines, cutting if necessary, all specials like round edge, curing and cleaning washing etc complete


106 Providing and laying of stamp impression concrete in approved pattern and shade in curvilinear/linear profile on prepared sub base to required thickness as per manufacturer's specifications. Work to be carriedout as per directions of Architect / Engineer-in-charge.


107 Providing & laying A Class Wire Cut Clay brick masonry 230 mm thick and in Mass brickwork with brick having crushing strength 35 kg / Sq.cm. in C.M. 1:6 (1 O.P. cement : 6 sand), including racking out joints, curing, scaffolding only, staging, leads, lifts and packing the junction of wall with ceiling & beam with (1:3:6) grade concrete including necessary shuttering etc. complete. as directed.


108 Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed ,200 to 250 sized polygonal stones in cement mortar 1:5, with 200 mm uniform groove and sunk pointing, acid wash, including projection bands upto 100m thick and 50mm projections


109 Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed ,200 to 250 sized polygonal stones in cement mortar 1:5, with jointless finish, including acid wash, , projection bands upto 100m thick and 50mm projections


110 Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed , 200 to 250 by 400 to 450 sized RECTANGULAR stones in cement mortar 1:5, with 200 mm uniform groove, including projection bands upto 100m thick and 50mm projections.


111 Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed , 200 to 250 by 400 to 450 sized RECTANGULAR stones in cement mortar 1:5, with jointless finish, including projection bands upto 100m thick and 50mm projections


112 Providing and constructing, Black Basalt Stone COPING and MOULDING 150 thick, in Natural Stones, hand tooled FINE dressed, 450 wide and 300 long RECTANGULAR stones, with jointless finish


113 Providing and constructing, Black Basalt FLAG STONE COPING / TREADS 100 thick, in Natural Stones, bush hand finish, 375 / 600wide and 900 long RECTANGULAR stones, with jointless finish


114 Providing and constructing, Flooring in SLATE Stone, 20 mm thick, polygonal stones 300 to 450 polygons, with 20 mm uniform joints filled with Epoxy Grout


115 Polished Granite - Inlay Etching Work, in 40 mm thick stone, upto 900mm x 900mm size, with inlay upto 10mm deep.


116 WOODEN WINDOW WITH FRAME W (1.8 M X 1.85 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top, middle, bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle (S.S. Finish), Chetna or Esco Like Hinges (S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay (S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)


117 WOODEN WINDOW WITH FRAME W1 (2.4 M X 1.85 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


117.1 WOODEN WINDOW WITH FRAME W1 (2.4 M X 1.85 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


117.2 WOODEN WINDOW WITH FRAME W1 (2.4 M X 1.85 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)








118.3 WOODEN WINDOW WITH FRAME W2 (1.8 M X 1.85 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)




122 WOODEN WINDOW WITH FRAME W8 (1.5 m X 1.85 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


122.1 WOODEN WINDOW WITH FRAME W8 (1.5 m X 1.85 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


122.2 WOODEN WINDOW WITH FRAME W8 (1.5 m X 1.85 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle, bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)


123 WOODEN WINDOW WITH FRAME W17 (1.20 m X 1.50 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed.(Only wood will be supplied at free of cost in standard sections)


124 WOODEN WINDOW WITH FRAME W11 (0.75 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - GROUND FLOOR .(Only wood will be supplied at free of cost in standard sections)


124.1 WOODEN WINDOW WITH FRAME W11 (0.75 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - FIRST FLOOR .(Only wood will be supplied at free of cost in standard sections)


125 WOODEN WINDOW WITH FRAME W22 (1.8 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed .(Only wood will be supplied at free of cost in standard sections)










128 WOODEN WINDOW WITH FRAME W15 (2.0 m X 2.1 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)


129 WOODEN WINDOW WITH FRAME W16 (2.0 m X 1.50 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed.- GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)








133 WOODEN WINDOW WITH Only Grill W6 (1.5 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


133.1 WOODEN WINDOW WITH Only Grill W6 (1.5 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed.- FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


134 WOODEN WINDOW WITH Only Grill W10 (1 m X 1 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)


134.1 WOODEN WINDOW WITH Only Grill W10 (1 m X 1 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


134.2 WOODEN WINDOW WITH Only Grill W10 (1 m X 1 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)


134.3 WOODEN WINDOW WITH Only Grill W10 (1 m X 1 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed. - THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)


135 WOODEN WINDOW WITH Only Grill W12 (0.75 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed.(Only wood will be supplied at free of cost in standard sections)


136 DOOR WITH TEAK WOOD FRAME & SHUTTER (D1=1.80X2.75 m)Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder (S.S.Finish) , Flat GI Holdfast with 6 mm High Performance glass with PU Polish complete as per dwg & as directed.- GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


136.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D1=1.80X2.75 m)Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder (S.S.Finish) , Flat GI Holdfast with 6 mm High Performance glass with PU Polish complete as per dwg & as directed.- FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


137 DOOR WITH TEAK WOOD FRAME & SHUTTER (D2=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. veneer on both side,46 mm wide 15mm thick. lipping on four sides.The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder with (S.S.Finish), Flat GI Holdfast, 19 mm thick. plywood, for Veneer with PU Polishing 6 mm High Performance glass with PU Polish complete as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)


138 DOOR WITH TEAK WOOD FRAME & SHUTTER (D3=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. veneer on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel.The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle (S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing with 6 mm High Performance glass complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


138.1 :DOOR WITH TEAK WOOD FRAME & SHUTTER (D3=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. veneer on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel.The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle (S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing with 6 mm High Performance glass complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


139 DOOR WITH TEAK WOOD FRAME & SHUTTER (D4=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast, with 6 mm High Performance glass with PU Polishing complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


139.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D4=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast, with 6 mm High Performance glass with PU Polishing complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


139.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D4=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast, with 6 mm High Performance glass with PU Polishing complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)


140 DOOR WITH TEAK WOOD FRAME & SHUTTER (D5=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature / Greenlam Deco Wood / True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top (S.S.Finish),Ozone Like Mortise lock Body + cylinder (S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing etc. complete as per dwg & as directed. - GROUND FLOOR(Only wood will be supplied at free of cost in standard sections)


140.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D5=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing etc. complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


141 DOOR WITH TEAK WOOD FRAME & SHUTTER (D6=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood / True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 750mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top(S.S.Finish), Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing, with 6 mm High Performance glass etc. complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


141.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D6=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood / True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 750mm wide.The work shall be


done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top(S.S.Finish), Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing, with 6 mm High Performance glass etc. complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

141.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D6=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood / True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 750mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top(S.S.Finish), Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing, with 6 mm High Performance glass etc. complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)


142 DOOR WITH TEAK WOOD FRAME & SHUTTER (D7=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 1500mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top (S.S.Finish), Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing with 6 mm High Performance glass etc. complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


142.1 DOOR WITH TEAK WOOD FRAME & SHUTTER As directed by Engineer in charge.

(D7=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 1500mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top (S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood,Veneer with PU Polishing, 6 mm High Performance glass etc. complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

142.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D7=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 1500mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing with 6 mm High Performance glass etc. complete as per dwg & as directed.- SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)


142.3 DOOR WITH TEAK WOOD FRAME & SHUTTER (D7=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 1500mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top (S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish), Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing with 6 mm High Performance glass etc. complete as per dwg & as directed. - THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)


143 DOOR WITH TEAK WOOD FRAME & SHUTTER (D8=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder (S.S.Finish),Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing etc. complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


143.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D8=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder (S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing etc. complete as per dwg & as directed. - GROUND FLOOR- FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


143.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D8=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder (S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing complete as per dwg & as directed. - GROUND FLOOR- SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)


143.3 DOOR WITH TEAK WOOD FRAME & SHUTTER (D8=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder (S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing complete as per dwg & as directed. - GROUND FLOOR- THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)


144 DOOR WITH TEAK WOOD FRAME & SHUTTER (D9=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality on one Side,Laminate on One Side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing complete as per dwg & as directed. - GROUND FLOOR(Only wood will be supplied at free of cost in standard sections)


144.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D9=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality on one Side,Laminate on One Side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


144.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D9=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on one Side,Laminate on One Side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)


145 DOOR WITH TEAK WOOD FRAME & SHUTTER (D10=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with vision Panel 750mm wide. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like


Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing with 6 mm High Performance glass complete as per dwg & as directed. -GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

145.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D10=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with vision Panel 750mm wide. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing with 6 mm High Performance glass complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


145.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D10=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with vision Panel 750mm wide. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing with 6 mm High Performance glass complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)


146 DOOR WITH TEAK WOOD FRAME & SHUTTER (D11=0.75X2.1 M) Fixing C.C. Superfine T.W. panelled shutter with top,bottom & side rails of


150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,19 mm thick. plywood for Veneer with PU Polishing (Granite Frame Cost included in civil Item) complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

146.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D11=0.75X2.1 M) Fixing C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,19 mm thick. plywood for Veneer with PU Polishing (Granite Frame Cost included in civil Item) complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


146.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D11=0.75X2.1 M) Fixing C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,19 mm thick. plywood for Veneer with PU Polishing (Granite Frame Cost included in civil Item) complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)


146.3 DOOR WITH TEAK WOOD FRAME & SHUTTER (D11=0.75X2.1 M) Fixing C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,19 mm thick. plywood for Veneer with PU Polishing (Granite Frame Cost included in civil Item) complete as per dwg & as directed. - THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)


147 DOOR WITH TEAK WOOD FRAME & SHUTTER (D12=0.9X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder (S.S.Finish), Esco or Europa Like Night Latch,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)


148 DOOR WITH TEAK WOOD FRAME & SHUTTER (D13=0.90X2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


148.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D13=0.90X2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


148.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D13=0.90X2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm


thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

148.3 DOOR WITH TEAK WOOD FRAME & SHUTTER (D13=0.90X2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. - THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)


149 DOOR WITH TEAK WOOD FRAME & SHUTTER(D14= 1X 2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. -GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)


149.1 DOOR WITH TEAK WOOD FRAME & SHUTTER(D14= 1X 2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco


Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. -FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

149.2 DOOR WITH TEAK WOOD FRAME & SHUTTER(D14= 1X 2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. -SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)


149.3 DOOR WITH TEAK WOOD FRAME & SHUTTER(D14= 1X 2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. -THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)


150 DOOR WITH TEAK WOOD FRAME & SHUTTER(D15= 2.40X 2.40 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like


Door Magnet & Stopper,Ozone Like Aldrop,Esco or Europa Like Tower Bolt with 6 mm High Performance glass with PU Polish complete as per dwg & as directed. -GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

150.1 DOOR WITH TEAK WOOD FRAME & SHUTTER(D15= 2.40X 2.40 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Aldrop,Esco or Europa Like Tower Bolt with 6 mm High Performance glass with PU Polish complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)


151 DOOR WITH TEAK WOOD FRAME & SHUTTER(D16= 2.00X 2.40 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Aldrop,Esco or Europa Like Tower Bolt with 6 mm High Performance glass with PU Polish complete as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)


152 C: Manglore Tiles For Roofing Proding & Fixing Manglore(Clay) Tiles For roofing having Size 200mm X 120mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete As per Drawing.- GROUND FLOOR


152.1 C: Manglore Tiles For Roofing Proding & Fixing Manglore(Clay) Tiles For roofing having Size 200mm X 120mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete As per Drawing.- FIRST FLOOR


152.2 C: Manglore Tiles For Roofing Proding & Fixing Manglore(Clay) Tiles For roofing having Size 200mm X 120mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete As per Drawing.- SECOND FLOOR


152.3 C: Manglore Tiles For Roofing Proding & Fixing Manglore(Clay) Tiles For roofing having Size 200mm X 120mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete As per Drawing.- THIRD FLOOR


153 D: Manglore Tiles For Ridges Proding & Fixing Manglore(Clay) Tiles for ridges having Size 200mm X 100mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete- GROUND FLOOR


153.1 D: Manglore Tiles For Ridges Proding & Fixing Manglore(Clay) Tiles for ridges having Size 200mm X 100mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete - FIRST FLOOR


153.2 D: Manglore Tiles For Ridges Proding & Fixing Manglore(Clay) Tiles for ridges having Size 200mm X 100mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete- SECOND FLOOR


153.3 D: Manglore Tiles For Ridges Proding & Fixing Manglore(Clay) Tiles for ridges having Size 200mm X 100mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete- THIRD FLOOR


154 F: Brick Tile Cladding Proding & Fixing Brick Tiles for wall Cladding having Size 230mm X 75mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete- GROUND FLOOR


154.1 F: Brick Tile Cladding Proding & Fixing Brick Tiles for wall Cladding having Size 230mm X 75mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete- FIRST FLOOR


155 F: Basalt Stone Cladding Proding & Fixing Black Basalt Stone Cladding at All Level in Cement Mortar 1:6 including Scaffolding Tools tackels racking the joints with Pointing with neet Cement Slurry Cutting, Dressing the stone acid wash Cleaning, Curing etc. complete- GROUND FLOOR


157 SRI Painting Providing & Applying on all rof tops one coat of exterior primer and two coats of acrylic (Ther Matek Heat Reflective) exterior grade aint with SRI>100 & minimum guarantee of reduction in roof surface temperture by 18 deg C (Akzonobel / Berger / Econova OR equivalent) including Safety Ladder, pulley system etc. complete at all levels including all taxes transportation- GROUND FLOOR


157.1 SRI Painting Providing & Applying on all rof tops one coat of exterior primer and two coats of acrylic (Ther Matek Heat Reflective) exterior grade aint with SRI>100 & minimum guarantee of reduction in roof surface temperture by 18 deg C (Akzonobel / Berger / Econova OR equivalent) including Safety Ladder, pulley system etc. complete at all levels including all taxes transportation- FIRST FLOOR


157.2 SRI Painting Providing & Applying on all rof tops one coat of exterior primer and two coats of acrylic (Ther Matek Heat Reflective) exterior grade aint with SRI>100 & minimum guarantee of reduction in roof surface temperture by 18 deg C (Akzonobel / Berger / Econova OR equivalent) including Safety Ladder, pulley system etc. complete at all levels including all taxes transportation- SECOND FLOOR


157.3 SRI Painting Providing & Applying on all rof tops one coat of exterior primer and two coats of acrylic (Ther Matek Heat Reflective) exterior grade aint with SRI>100 & minimum guarantee of reduction in roof surface temperture by 18 deg C (Akzonobel / Berger / Econova OR equivalent) including Safety Ladder, pulley system etc. complete at all levels including all taxes transportation- THIRD FLOOR


159 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete


160 Providing and fixing 15 mm thick ecofriendly densified edge calcium silicate false ceiling (like aeroltie) of approved texture spintone / cosmos/ hexa or equivalent of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides)consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick (minimum ) sheet, spaced 1200 mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of


size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)- GROUND FLOOR

160.1 Providing and fixing 15 mm thick ecofriendly densified edge calcium silicate false ceiling (like aeroltie) of approved texture spintone /cosmos/ hexa or equivalent of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides)consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/ cosmos /hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)FIRST FLOOR


160.2 Providing and fixing 15 mm thick ecofriendly densified edge calcium silicate false ceiling (like aeroltie) of approved texture spintone /cosmos/hexa or equivalent of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides)consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm


thick densified edges calcium silicate ceiling tiles of approved texture (spintone/ cosmos/ hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)- SECOND FLOOR

160 A PLime, Fly ash Stabilized Soil SubBase Construction of Sub base using lime Fly ash admixture with granular soil, free from organic matter/ deleterious material or clayey silts and low plasticity clays having PI between 5 and 20 and liquid limit less than 25 and commercial dry lime, slaked at site or preslaked with CaO content not less than 50 per cent, Fly ash to conform to gradation as per clause 4.3 of IRC: 881984, lime + Fly ash content ranging between 10 to 30 per cent, the minimum un confined compressive strength and CBR value after 28 days curing and 4 days soaking to be 7.5kg/sq, cm and 25 per cent respectively, all as specified in IRC: 881984.


161 Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any. (Tree cutting permission shall be obtained by the department)

MORTH 201 As directed by Engineer in charge.







165 Cutting down trees including trunks and branches with girths above 270cm to 450cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.y, all as specified in IRC: 88-1984. (Tree cutting permission shall be obtained by the department)


166 Cutting down trees including trunks and branches with girths above 450cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any. (Tree cutting permission shall be obtained by the department)


167 Suppling & laying Rigid PVC conduit 25 mm Dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1

WG-MA/CC, para no. 1.2.1


168 Suppling & laying Rigid PVC conduit 16 SWG 32 mm Dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1






170 Providing and fixing UPVC SOIL / VENT / WASTE SWR pipe of required diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 4 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions, and jointing with rubberring and lubricants,on wall by means of clips or in ground including necessary excavation,laying,refilling trench,testing etc complete.- 75 mm dia


170.1 Providing and fixing UPVC SOIL / VENT / WASTE SWR pipe of required diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 4 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions, and jointing with rubberring and lubricants,on wall by means of clips or in ground including necessary excavation,laying,refilling trench,testing etc complete.- 75 mm dia- 110 mm dia


171 Providing and fixing stop cock of specified dia. including necessary sockets, union nut testing etc. complete.


172 Providing and fixing fittings and accessories such as ball cock, over flow pipe with mosquito proof coupling, scour pipe with plug, manhole with cover and locking arrangement, connecting pipes and embedding intake and outflow pipes into the R.C.C. water reservoir.


173 Providing and fixing stop cock of specified dia. including necessary sockets, union nut testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary efore use.) Conceal stop cock 20m.


174 Providing and fixing in position 40 mm. heavy type alkathene pipe for drainage connections including cutting, boring holes in wood work or masonry if necessary, making connections of pipe to sink and giving test for no leakages, making good the damaged surface etc. complete.


175 CPVC PIPING Providing and fixing on walls/ ceiling/ floor 15mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.


175.1 Providing and fixing on walls/ ceiling/ floor 20mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.










176 Providing and fixing in position unplasticized poly venyl-chloride (UPVC) ultra voilet rays stabilised 110 mm outer diameter rain water SWR pipe conforming to I.S. 4985 and I.S.13592,including necessary fittings, such as PVC grating, bends, PVC clamps, horse shoes at bottom, rubber ring and making connections water tight with solvent, cement including making holes in masonary concrete redoing the same in C.M. 1:3, curing, testing etc. complete.


177 Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipal requirements etc. complete. complete.- 40mm dia


178 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc complete.


179 Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etccomplete.


NS 180 NS Items Providing and fixing 1st class white glazed earthenware "Orissa type" W.C.Pan 600 x 400 mm size including 'P'or 'S'trap UPVC soil and vent pipe upto the outside face of the wall, 1:5:10 cement concrete bedding without flushing cistern and with metropole flush valve (DUAL FLUSH 4 AND 2 LPF) with 40mm size and necessary fittings (Jaquar/ Cera/ Johnson / Hindware or Equivalent). inlet pipe with stop tap, bracket for fixing the cistern, 32 mm dia. UPVC flush pipe with fitting and clamps, 20 mm dia. UPVC over flow pipe with mosquito proof coupling, chain and pulley, painting of the exposed pipe and cutting and making good walls and floor, testing etc. complete. including all taxes, for all leads and lifts, testing etc. complete.


NS 181 Providing and fixing European type white glazed earthernware water closet with metropole flush valve (DUAL FLUSH 4 AND 2 LPF), water jet and fittings (Jaquar/ Cera/ Johnson / Hindware or Equivalent), UPVC seat and lid with chromium plated brass hinges including UPVC soil and vent pipe upto the outside face of the wall including 100 mm dia. UPVC plug bend, inlet pipe, stop tap etc. all fittings, cutting and making good to the walls and floor, testing etc. complete.


NS 182 Providing and fixing white glazed earthenware Wash Hand Basin of 55 cm x 40 cm size including cold water pillar tap (LOW FLOW MAXIMUM 4 LPM @ 3 BAR ), brackets, rubber plugs, waste coupling and necessary pipe conections including UPVC waste pipe & connection to P-Trap upto the outside face of the wall, cutting and making good to the walls and floor, testing etc. complete. with cold water pillar tap. including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Jaquar/ Cera)

Bd. V. 30 565 As directed by Engineer in charge.

NS 183 Providing and fixing Steel sink of size 600 mm x 450 mm x 250 mm (1 mm thick) UPVC waste pipe upto outside face of wall, or upto floor trap cold water chromium plated screw down sink cock (LOW FLOW MAXIMUM 4 LPM @ 3 BAR ), rubber plug and brass chain, making good the damaged surface, etc. complete.including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Nirali / Anupam / Futura)


NS 184 Providing and fixing chromium plated wall mixer (LOW FLOW MAXIMUM 6 LPM @ 3 BAR ) cock of heavy duty without washer with chromium plated showers without telephonic arrangement including necessary supply pipes 15 mm dia. and fittings like socket union, nuts, bends, valves, reducers, including necessary drilling holes in walls, slabs etc and remaking good the demolished portion to restore the same in original condition neatly and cleaning the site after completion of work, testing etc.complete. including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Jaquar/ Cera)


NS 185 Providing and fixing white glazed earthenware semi stall type urinals with pressmatic push valve ( Low flow - 1 LPF ) , UPVC flush pipe with fittings, including spreader and CP pipe , UPVC soil pipe, connection to floor trap and soil pipe connection upto outside face of wall, making good the damaged surface, testing etc. complete.ncluding all taxes, for all leads and lifts, testing etc. (Approved Makes: Jaquar/ Cera)

Bd.V.28 565 As directed by Engineer in charge.

NS 186 Providing and fixing Chromium Plated 2 Way BIB cock (LOW FLOW MAXIMUM 6 LPM @ 3 BAR ) with wall flange including necessary sockets/ union nut, including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Jaquar/ Cera)


NS 187 Providing and fixing Jaquar make series Hand shower (health faucet) with 8millimetre diameter 1 Metre long flexible tube and wall hook including necessary sockets/ union nut ,including all taxes, for all leads and lifts, testing etc. complete.


NS 188 Providing and fixing Chromium Plated BIB cock with wall flange (LOW FLOW MAXIMUM 6 LPM @ 3 BAR ) including necessary sockets/ union nut etc.including all taxes, for all leads and lifts, testing etc. (Approved Makes: Jaquar/ Cera)


NS 189 Providing and fixing UPVC Floor trap (multi-type) of self cleansing design with water seal not less than 50 mm, 3 nos. of 40mm waste water connections, including cost of cutting and making good the walls and floors where required Including CP grating, including square C.P. brass grating with C.P. brass frame with anti-cockroach trap including fixing to the floor with cement mortar and colour grout etc.including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Supreme/ Prince/ Raksha)


NS 190 C.P. brass grating with C.P. brass square frame including fixing to the floor with cement mortar and colour grout etc complete. 150 mm dia grating– Terrace / Balcony Rainwater grating.including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Viking/ Syscraft/ Chilly)


NS 191 C.P. brass P-trap with water seal not less than 50 mm including flange plate as per manufacturer's instructions.including all taxes, for all leads and lifts, testing etc. complete.32mm dia (Approved Makes: Syscraft / Viega)


NS 191.1

C.P. brass P-trap with water seal not less than 50 mm including flange plate as per manufacturer's instructions.including all taxes, for all leads and lifts, testing etc. complete.40mm dia (Approved Makes: Syscraft / Viega)


NS 192 Providing and fixing U-PVC pipes of SCH 80 with all UPVC fittings as per ASTM D-2846 such as Tee, Elbow, Coupler, Adapter etc also with brass threaded transition such as MABT, FABT, metal Tee, metal Elbow etc where connection with metal is to be made, joint to be made with UPVC solvent as per ASTM F 493 including fabricated pipe supports, GI brackets, clamps, U-clips etc., including cutting chases and making good the walls etc. (for cold water and flushing water supply).including all taxes, for all leads and lifts, testing etc. complete. 15mm pipe (Approved Makes: Ashirwad/ Raksha/ Astral/ Supreme)


NS 192.1

Providing and fixing U-PVC pipes of SCH 80 with all UPVC fittings as per ASTM D-2846 such as Tee, Elbow, Coupler, Adapter etc also with brass threaded transition such as MABT, FABT, metal Tee, metal Elbow etc where connection with metal is to be made, joint to be made with UPVC solvent as per ASTM F 493 including fabricated pipe supports, GI brackets, clamps, U-clips etc., including cutting chases and making good the walls etc. (for cold water and flushing water supply).including all taxes, for all leads and lifts, testing etc. complete. 20mm pipe (Approved Makes: Ashirwad/ Raksha/ Astral/ Supreme)


NS 192.2



NS 192.3



NS 192.4



NS 192.5



NS 192.6



NS 193 Providing and fixing cast brass ball valves chrome plated ball inside and hard chrome plated ball PTFE (Teflon) seal and ring and chrome plated steel centre handle with female BSP threads as directed by the Engineer-in-Charge .including all taxes, for all leads and lifts, testing etc. complete.


20mm dia (Approved Makes: VB/ Lehry/ Zoloto)NS

193.1Providing and fixing cast brass ball valves chrome plated ball inside and hard chrome plated ball PTFE (Teflon) seal and ring and chrome plated steel centre handle with female BSP threads as directed by the Engineer-in-Charge .including all taxes, for all leads and lifts, testing etc. complete. 25mm dia (Approved Makes: VB/ Lehry/ Zoloto)


NS 193.2

Providing and fixing cast brass ball valves chrome plated ball inside and hard chrome plated ball PTFE (Teflon) seal and ring and chrome plated steel centre handle with female BSP threads as directed by the Engineer-in-Charge .including all taxes, for all leads and lifts, testing etc. complete. 32mm dia (Approved Makes: VB/ Lehry/ Zoloto)


NS 193.3



NS 193.4



NS 194 Providing and fixing SS 'Y' type strainer with watch glass and cleaning back-flush valve.including all taxes, for all leads and lifts, testing etc. complete. 1 1/4 inch (Approved Makes: Varie / Zoloto / Lehry)


NS 194.1

Providing and fixing SS 'Y' type strainer with watch glass and cleaning back-flush valve.including all taxes, for all leads and lifts, testing etc. complete. 1 1/2 inch (Approved Makes: Varie / Zoloto / Lehry)


NS 194.2

Providing and fixing SS 'Y' type strainer with watch glass and cleaning back-flush valve.including all taxes, for all leads and lifts, testing etc. complete. 2 inch (Approved Makes: Varie / Zoloto / Lehry)


NS 194.3

Providing and fixing SS 'Y' type strainer with watch glass and cleaning back-flush valve.including all taxes, for all leads and lifts, testing etc. complete. 2 1/2 inch (Approved Makes: Varie / Zoloto / Lehry)


NS 195 Providing & fixing gun metal horizontal wafer type non return valve conforming to IS 778 and tested to a pressure not less than 15 Kg/Sq.cm, Including rubber gasket, flanges, union, nuts, bolts & washers complete as required.including all taxes, for all leads and lifts, testing etc. complete. 1/2 inch (Approved Makes: VB/ Lehry/ Zoloto)


196 External Plumbing Works Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means(i - lift upto 1.5m)

Bd.A.1 259 As directed by Engineer in charge.

196.1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means (1.5 to 3m)


197 Providing & constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover. ?450mm X 900mm

Bd.V. 43 574 As directed by Engineer in charge.

198 Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stoneware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover.


199 Providing and fixing 15 cm x 10 cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including symet grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with R.C.C. lid and Symet grating for the gully trap, testing etc. complete.


200 Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.






203 Providing and laying cement concrete pipe of IS 458:2003 NP2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.




205 Providing and fixing 45 cm wide mild steel ladder of 40mm x 6mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M15 cement concrete block 60cm x 30cm x 30cm & painting the ladder complete.(Anti Corossive Paint


NS 206 NS Item Installation of Rain Water Percolation pits - 2000 mm X 2000mm up to 2000 mm deep, bottom 500 mm filled with boulders 10 - 20 mm size, middle 500 mm filled with gravels 5 - 10 mm size, and top 500 mm filled with coarse sand 1.5 - 2 mm size, in between which one no. UPVC 200 mm dia (6.0 kg/cm2) perforated pipe with 8 mm dia perforations protected by a cowl on upper end upto aquifer level inserted. The top 500 mm shall be left open, with RCC slab and manhole cover.


NS 207 Fixing water meter with direct reading dial in KL with all internal parts in gunmetal or brass, strainer, flanged distance piece for easy removal in future, 25 mm dia. Bourden type Municipal pressure gauge and isolation cock including necessary test certificate for the meter from Local Authorities (For Municipal Connection).25mm dia


NS 207.1

Fixing water meter with direct reading dial in KL with all internal parts in gunmetal or brass, strainer, flanged distance piece for easy removal in future, 25 mm dia. Bourden type Municipal pressure gauge and isolation cock including necessary test certificate for the meter from Local Authorities (For Municipal Connection).32mm dia


NS 207.2



NS 207.3



NS 208 Providing & Fixing butterfly valve (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required.65mm dia


NS 208.1

Providing & Fixing butterfly valve (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required.80mm dia


NS 209 Construction of grit and grease trap as per approved drawing of size 3m X 2m and 1.5m deep including excavation, backfilling, PCC, Brickwork, plasterning internally and externally, inspection chambers etc complete including all taxes, leads, lifts etc complete.


NS 210 Constructing brick masonry chamber upto 1.5 m deep, with first class bricks in cement mortar 1:5 RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix , inside and outside plastering 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix neatly finished complete as per standard design including excavation refilling and disposal of surplus earth. Manhole cover and frame to be in RCC tested for heavy load class as per IS 1726.600 X 600 rainwater chamber with RCC perforate cover


NS 210.1

Constructing brick masonry chamber upto 1.5 m deep, with first class bricks in cement mortar 1:5 RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix , inside and outside plastering 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix neatly finished complete as per standard design including excavation refilling and disposal of surplus earth. Manhole cover and frame to be in RCC tested for heavy load class as per IS 1726.600 X 600 storm chamber with RCC cover


NS 210.2

Constructing brick masonry chamber upto 1.5 m deep, with first class bricks in cement mortar


1:5 RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix , inside and outside plastering 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix neatly finished complete as per standard design including excavation refilling and disposal of surplus earth. Manhole cover and frame to be in RCC tested for heavy load class as per IS 1726.Inspection Chamber 900mm X 900mm with perforated cover (Internal Size)

NS 210.3

Constructing brick masonry chamber upto 1.5 m deep, with first class bricks in cement mortar 1:5 RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix , inside and outside plastering 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix neatly finished complete as per standard design including excavation refilling and disposal of surplus earth. Manhole cover and frame to be in RCC tested for heavy load class as per IS 1726.0.90m X 0.90m dia manhole with RCC cover


NS 210.4

Constructing brick masonry chamber upto 1.5 m deep, with first class bricks in cement mortar 1:5 RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix , inside and outside plastering 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix neatly finished complete as per standard design including excavation refilling and disposal of surplus earth. Manhole cover and frame to be in RCC tested for heavy load class as per IS 1726.1.2m X 1.2m dia manhole with RCC cover


NS 211 Providing and fixing GI Puddle flange, both side flanged ends, epoxy painted, to be inserted in RCC Tank as per Consultants drawing, with required welding with reinforcement steel .including all taxes, for all leads and lifts, testing etc. complete.200mm


NS 211.1

Providing and fixing GI Puddle flange, both side flanged ends, epoxy painted, to be inserted in RCC Tank as per Consultants drawing, with required welding with reinforcement steel .including all taxes, for all leads and lifts, testing etc. complete.150mm dia (threaded ends)


NS 211.2



NS 211.3



NS 211.4



NS 211.5



NS 212 Providing and fixing Side Manhole 1200X900 MS.including all taxes, for all leads and lifts, testing etc.


NS 213 Providing and fixing Top Manhole cover 600X600 CI.including all taxes, for all leads and lifts, testing etc.




NS 215 Swimming Pool Providing and fixing Swimming Pool Ladders in S.S. 304 with non-slip treads.including all taxes, for all leads and lifts, testing etc.complete2 Steps


NS 215.1

Providing and fixing Swimming Pool Ladders in S.S. 304 with non-slip treads.including all taxes, for all leads and lifts, testing etc.complete3 Steps.


NS 216 Providing and fixing Swimming pool cleaning kit comprising of:including all taxes, for all leads and lifts, testing etc. complete a) Anodized Aluminium Suction Sweeper (1No),b) 38mm dia Suction Hose (30m),c) Al. Telescopic Handle, 8' to 16' long (1No),d) Deep Bag Net (1No),e) Curved Nylon Brush, 18" long (1No),f) Test Kit for Chlorine & pH (1No).f) Test Kit for Chlorine & pH (1No).


NS 217 Providing and fixing PVC (UV stabilized) grating 300mm wide of approved colour for swimming pool deck overflow channel.including all taxes, for all leads and lifts, testing etc.


NS 218 Providing and fixing S/L u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. complete for re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm2.63mm dia


NS 218.1

Providing and fixing S/L u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. complete for re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm275mm dia


NS 218.2

Providing and fixing S/L u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. complete for re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm290mm dia


NS 218.3

Providing and fixing S/L u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. completefor re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm2110mm dia


NS 218.4

Providing and fixing laying u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. completefor re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm2140mm dia


NS 218.5

Providing and fixing laying u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. completefor re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm2 160mm dia


NS 219 Providing and fixing laying Heavy Duty Valves.including all taxes, for all leads and lifts, testing etc. complete2.5" dia Ball Valves, Make - Prince


NS 219.1

Providing and fixing laying Heavy Duty Valves.including all taxes, for all leads and lifts, testing etc. complete3" dia Ball Valves, Make - Prince


NS 219.2

Providing and fixing Heavy Duty Valves.including all taxes, for all leads and lifts, testing etc. complete6" dia Butterfly Valves, Make - Aqvastar


NS 219.3

Providing and fixing Heavy Duty Valves.including all taxes, for all leads and lifts, testing etc. complete2.5" dia Non Return Valves, Make - Aqvastar


NS 219.4

Providing and fixing Heavy Duty Valves.including all taxes, for all leads and lifts, testing etc. complete3" dia Foot Valves, Make - Jain


220 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Mechanical Means.

MORTH CL. 301 The useful excavated material shall be utilised as directed by the Engineer In Charge .

221 Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. By Mechanical Means.


222 Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed. By mechanical means


223 Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.

MORTH CL. 305 As directed by Engineer in charge

224 Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed.

MORTH CL. 305 As directed by Engineer in charge

225 Transportation of materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 2000m. inclusive, from the site of excavation to the site of deposition as directed.

As directed by Engineer in charge

226 Lime, Fly ash Stabilized Soil SubBase Construction of Sub base using lime Fly ash admixture with granular soil, free from organic matter/ deleterious material or clayey silts and low plasticity clays having PI between 5 and 20 and liquid limit less than 25 and commercial dry lime, slaked at site or preslaked with CaO content not less than 50 per cent, Fly ash to conform to gradation as per clause 4.3 of IRC: 881984, lime + Fly ash content ranging between 10 to 30 per cent, the minimum un confined compressive strength and CBR value after 28 days curing and 4 days soaking to be 7.5kg/sq, cm and 25 per cent respectively, all as specified in IRC: 881984.

MORTH CL. 403 As directed by Engineer incharge

227 Construction of granular subbase by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 By Mix in Place Method and Grading II Material


228 Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.


229 Construction of dry lean cement concrete Subbase over a prepared subgrade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer incharge , compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete.


230 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS 383, using fine & coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge

M.O.R.T.& H Cl-602

1. The appropriate mix design shall be got prepared from the approved government laboratory well in advance and got approved from Engineer in charge before starting the work.2. The rate of consumption of cement in mix design are considered for the work as per general practice in actual design ,if the cement consumption is less than that shown in item,therate will be reduced accordingly .If the rate as per mix design for cement consumption is more than that as per item ,the extra cement will have to be brought by the contractor at his own cost.3. Before concreting work,cement form each consignment shall be got tested .if the strength of fresh cement available in stock and concreting work shall be done accordingly to modified mix design.

231 Providing and fixing in position mild steel 32 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia.

MORTH 602 As directed by Engineer in charge These shall confirm to therequirements of IS : 432, IS : 1139 and IS : 1786 as relevant. The dowel bars shall confirm to Grade S 240 and tie bars to Grade S 415 of I.S.

232 Providing and fixing in position HYSD tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C & wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of HYSD chairs with proper alignment etc. complete.

MORTH 602 As directed by Engineer in charge

233 Providing and laying 125 micron Low Density Polyethylene ( LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

MORTH 602.5 As directed by Engineer in charge

234 Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

MORTH CL 602.6


235 Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS: 5212 ¬ 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor & allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction & longitudinal joints (15 mm. deep x 8 mm.wide)

MORTH CL 602.11.3


236 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 750 mm made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67¬2012 Table No 8.3 supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer & authorised distributor/convertor issued for field performance including the screen printed areas and cut¬out sheeting and cut¬ out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

MORTH CL 801 As directed by Engineer in charge



238 Providing and fixing of retro¬ reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square meter made out of 4mm aluminum composite material ( ACM) sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67¬2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint & supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class C ( Type XI Micro prismatic grade sheeting) sheeting shall have 10 years written warranty from the manufacturer & authorised distributor/convertor issued for field performance including the screen printed areas and cut¬out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.


239 Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 mm dia made out of 1.5mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro¬prismatic grade sheeting¬HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67¬2012 Table No8.3 supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro¬prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer & authorised distributor/convertor issued for field performance including the screen printed areas and cut¬out sheeting and cut¬out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.


240 Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 mm dia made out of 1.5mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67¬2012 Table No 8.3 supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro¬prismatic grade sheeting¬HIP) shall have 10 years written warranty from the manufacturer & authorised distributor/convertor issued for field performance including the screen printed areas and cut¬out sheeting and cut¬out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.


241 Supplying & Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No

MORTH CL 805 As directed by Engineer incharge

RW/NH/33023/10¬97 ? DO III Dt 11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/¬ 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/¬ 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/¬ 2 mm and height not less than 30+/¬ 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer?s recommendation and complete as directed by the engineer.

242 Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface¬ Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.

MORTH CL 803.4


243 Providing and casting in situ or precast tapering R.C.C. M¬20 Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M¬10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant


244 Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete.

BR 43 138 As directed by Engineer in charge

245 Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

MORTH CL 409.3.4


246 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Sieve Analysis

1) The test shall be carried out in accordance with the Clause " Quality Control Test & Their Frequency” given under "Additional General Conditionas & Specification" of this tender document.

2) In case the desired results are not obtained during testing or the material is rejected due to unsatisfactory results the testing charges shall not be paid to the contractor.3)It shall be obligatory on contractor to produce the test result along with receipt of payment made to the Laboratory, for releasing payment towards Testing Charges.4 Testing charges are mentioned in view of the rates finalised by the Vigilance & Quality Control Circle, Nagpur and it will be the responsibility of contractor to pay the testing charges to the concerned Laboratory in accordance with the rates finaised. No difference shall be payable to the contractor in case testing charges are revised by the Laboratory.

246.1 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Field Moisture Content

Same as above.

246.2 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Liquid Limit & plastic limit

Same as above.

246.3 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Compaction Test ( Proctor Density)

Same as above.

246.4 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.C.B.R. Test (Excluding compaction test)

Same as above.

246.5 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.C.B.R. Test (Field determination Test) including transpirtation per ISI 2720 Part xxx

Same as above.

246.6 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Dead Journey Charges Inspection vehicles

Same as above.

246.7 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Dead Journey Charges Truck /Tipper

Same as above.

246.8 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Field Desity by sand replacement method

Same as above.

246.9 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Sulphate & chloride Contents

Same as above.

246.10 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Mechanical Analysis

Same as above.

246.11 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.plate load bearing test ( excluding Transportation)

Same as above.

246.12 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Free Swel test for soil

Same as above.

247 Carrying out test of sand transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Fineness Modulus( Sieve analysis)silt & clay content

Same as above.

247.1 Carrying out test of sand transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Chloride & sulphate Content

Same as above.

247.2 Carrying out test of sand transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Silt Factor

Same as above.

248 Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Water Absortion, Specific Gravity , Impact value,Crushing Value

Same as above.

248.1 Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Sieve Analysis

Same as above.

248.2 Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Abrasion Value

Same as above.

248.3 Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Flakiness index, Elongation Index

Same as above.

248.4 Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Stripping Value

Same as above.

248.5 Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Soundness

Same as above.

248.6 Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Bulk Density

Same as above.

249 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Compressive Strength OF C.C. Cube(Set of 3 cubes).

Same as above.

249.1 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Concrete Mix Design (With all Tests on basic materials)*

Same as above.

249.2 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Flexural strength of Beam.

Same as above.

249.3 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Concrete mix design by Accelerated curing method.

Same as above.

249.5 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.(Boiling water method)

Same as above.

249.6 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Taking of core samples in concrete pavement. (Excluding Dead Journey Charges)

Same as above.

250 Carrying out test of Cement transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.i) Compessive strength ii) Initial setting time iii) Final setting time iv) Specific Gravity v) Soundness Test vi) Fineness test

Same as above.

251 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.a. Upto 16mm dia.i) Weight / metre ii) Ultimate tensile stess

Same as above.

251.1 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.b. Above 16mm dia.iii) Yield stress iv) Elongation Test

Same as above.

251.2 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.b. Above 16mm diaNitrol Solution Test

Same as above.

252 Carrying out various test of Bricks transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.i) Water absorption ii) Compressive Strength iii) Efflorence Test

Same as above.

253 Carrying out various test of Ceramic tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Water Absorption, Modules of Rapture (Set of 6 Tiles)

Same as above.

254 Carrying out various test of Mangalore tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Water Absorption (Set of 6 Tiles), Flexural test (Set of 6 tiles)

Same as above.

254.1 Carrying out various test of Mangalore tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Permeability.

Same as above.

255 Carrying out various test of Brick tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Water Absorption (Set of 6 Tiles), Flexural test (Set of 6Tiles)

Same as above.

255.1 Carrying out various test of Brick tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Permeability.

Same as above.

256 Carrying out various test of Mortarprepared on site (set of 3 cubes) in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Compressive Strength , Water Absorption, (Set of 8 Blocks), Flexural Test ( Set of 8 Blocks). Resistance to wear.( Set of 8 Blocks)

Same as above.

257 Carrying out various test of Mortarprepared on site (set of 3 cubes) in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Compressive Strength.( Set of 3 Cubes)

Same as above.

258 Carrying out various test of Paving Block tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Crushing Value/Compressive Strength Water Absorption& Specific Gravity,

Same as above.

259 Carrying out various test ofwater available from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.PH Value, Sulphate & Chloride Content

Same as above.

260 Carrying out various test of wood from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Density, Moisture Content

Same as above.

261 Carrying out various test of flush door from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Knife Test, Adhesion Test, End Immersion Test

Same as above.

262 Carrying out various test of Aluminium Section from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Thickness, Mass Per Running meter

Same as above.

262.1 Carrying out various test of Aluminium Section from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Test on Powder Coating

Same as above.

263 Carrying out various test of PVC Pipe from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Weight per running meter, Diameter of pipe & wall thickness of pipe

Same as above.

263.1 Carrying out various test of PVC Pipe from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Weight of Zinc coating per sq. m.

Same as above.

264 Carrying out various test of G.I.Pipe from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Weight per running meter, Diameter of pipe & wall thickness of pipe

Same as above.

265 Carrying out various test of Paint from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Glass bead contents & grading analysis

Same as above.

265.1 Carrying out various test of Paint from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Reflectance & yellowness index.

Same as above.

265.2 Carrying out various test of Paint from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Flowability.(Percentage residue).

Same as above.

265.3 Carrying out various test of Paint from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Softening Point. (Ring & ball method).

Same as above.

265.4 Carrying out various test of Paint from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Drying Time.

Same as above.

266 Carrying out various Non Destructive test on site etc. complete.Rebound Hammer Test.

As directed by Engineer in Charge.

266.1 Carrying out various Non Destructive test on site etc. complete.Ultrasonic Pulse Velocity

As directed by Engineer in Charge.

267 Lab Testing For Road Works Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Sieve Analysis

1) The test shall be carried out in accordance with the Clause " Quality Control Test & Their Frequency” given under "Additional General Conditionas & Specification" of this tender document. 2) In case the desired results are not obtained during testing or the material is rejected due to unsatisfactory results the testing charges shall not be paid to the contractor.

3)It shall be obligatory on contractor to produce the test result along with receipt of payment made to the Laboratory, for releasing payment towards Testing Charges.4 Testing charges are mentioned in view of the rates finalised by the Vigilance & Quality Control Circle, Nagpur and it will be the responsibility of contractor to pay the testing charges to the concerned Laboratory in accordance with the rates finaised. No difference shall be payable to the contractor in case testing charges are revised by the Laboratory.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.

270.1 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Compressive Strength OF C.C. Cube(Set of 3 cubes).

Same as above.

270.2 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Concrete Mix Design (With all Tests on basic materials)*

Same as above.

270.3 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Flexural strength of Beam.

Same as above.

270.4 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Concrete mix design by Accelerated curing method.

Same as above.

270.5 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.(Boiling water method)

Same as above.

270.6 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Taking of core samples in concrete pavement. (Excluding Dead Journey Charges)

Same as above.

270.7 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.GSB Mix Design

Same as above.


Same as above.

272 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.i) Upto 16mm dia. Weight / metreii) Upto 16mm dia.Ultimate tensile stess

Same as above.

272.1 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.iv) Above 16mm dia.Elongation Test Yield stress

Same as above.

272.2 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Nitrol Solution Test

Same as above.


Same as above.


Same as above.


Same as above.


Same as above.


Same as above.

274 Carrying out Road Sign board test on site etc. complete.Retro Reflective Test

Same as above.

275 Carrying out Rough Index / Road Unevenness Test test on site etc. complete. Road Surface Single Lane.(3.70 to 5.50 m)

Same as above.

275.1 Carrying out Rough Index / Road Unevenness Test test on site etc. complete.Road Surface 1.5 Lane to Two Lane.(5.50 to 7.00 m)

Same as above.

275.2 Carrying out Rough Index / Road Unevenness Testcomplete.Each Additional Lane.

test on site etc.

Same as above.

275.3 Carrying out Rough Index / Road Unevenness Testcomplete.Dead Journey Charges

test on site etc.

Same as above.

276 Excavation for foundation in soft strata which does not required blasting Upto 1.5 Mtr. depth includig removing the excavated material upto a distance of 50 Mts.(i.e. About 164') beyond the building area and lift. Excavation for foundation in earth, soils of all type sand gravel and soft murum including removing the excavated material up to a distance of 50 mtr, beyond the building area and stacking or spreading as directed preparing the bed for foundation and necessary back filling ramming and watering including shoring and strutting as necessary complete, 1. Lift up to 1.5mtr.


276.1 Filling fresh garden soil/ silt & manure in excavated area including lead upto a distance of 50 Mtrs. (1/10 of unskilled labour)


276.2 Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting required plant species,lawn grass as directed etc.complete.(1/10 of Semiskilled labour).


276.3 Mazdoor Unskilled light/Female for garden work As directed by Engineer in charge.276.4 Semiskilled Labour (Mali) for garden work. As directed by Engineer in charge.277 GARDEN SOIL:- Supplying on site garden soil well

sieved 90% to pass through I.S.sieve of 10mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The colour of the soil generally be red. the soil will be measured by measuring box.(Farma) Item includes royalty charges, octroi, corporation Tax Transporting, loading-unloading etc.


277.1 FARM YARD MANURE:- Supplying on site well decayed, well dried, well powdered, wihtout clods and free from stones, dried grass and other rubbish material. The colour of the manure generally be black. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading-unloading etc


278 PLANTS - Roses common / budded varieties As directed by Engineer in charge.278.1 PLANTS - Mogra / Creeper / Climbers As directed by Engineer in charge.278.2 PLANTS - Canna Rhyzome common varieties. As directed by Engineer in charge.278.3 PLANTS - Seedings of Seasonals.(open

Pollinated.) (for 100 nos.)As directed by Engineer in charge.

278.5 PLANTS - Rooted / Unrooted cutting for edging /border. (For 100 Nos.)


278.6 PLANTS - Lawn grass Cynadon on Paspallum. As directed by Engineer in charge.279 PLANTS - Saplings of flowering/shady trees,

Gulmohar, Raintree, Peltophorum etc. In polybag(ht.min.upto 1 mtr.)


279.1 Trees Saplings of flowering/shady trees, Gulmohar, Raintree, Peltophorum etc. In polybag(ht.upto 2-2.5mtr.)- Aegle marmelos


279.2 Albizia lebbek As directed by Engineer in charge.279.3 Alstonia scholaris As directed by Engineer in charge.279.4 Bombax ceiba As directed by Engineer in charge.279.5 Butea monosperma As directed by Engineer in charge.279.6 Calophyllum inophyllum As directed by Engineer in charge.279.7 Cedrela toona As directed by Engineer in charge.279.8 Cordia sebestena As directed by Engineer in charge.279.9 Crateava nuruvala As directed by Engineer in charge.

279.10 Dalbergia lanceloria Paniculata As directed by Engineer in charge.279.11 Dalbergia sisoo As directed by Engineer in charge.279.12 Dillenia indica As directed by Engineer in charge.279.13 Dillenia indica As directed by Engineer in charge.279.14 Diospyros melanoxylon As directed by Engineer in charge.279.15 Erythrina indica Variegara As directed by Engineer in charge.279.16 Ficus benjamina As directed by Engineer in charge.279.17 Ficus Religiosa As directed by Engineer in charge.279.18 Ficus retusa As directed by Engineer in charge.

279.19 Gmelina arorea As directed by Engineer in charge.279.20 Holoptelea integrifolia As directed by Engineer in charge.279.21 Madhuka longifolia As directed by Engineer in charge.279.22 Manikara hexendra As directed by Engineer in charge.279.23 Minusops elengi As directed by Engineer in charge.279.24 Morus indica As directed by Engineer in charge.279.25 Phyllanthus acidus As directed by Engineer in charge.279.26 Phyllanthus emblica As directed by Engineer in charge.279.27 Pongamia pinnata As directed by Engineer in charge.279.28 Pterospermum acerifolium As directed by Engineer in charge.279.29 Schleichera oleosa As directed by Engineer in charge.279.30 Spathodia campanulata As directed by Engineer in charge.279.31 Syzygium cumini As directed by Engineer in charge.279.32 Syzygium jambo As directed by Engineer in charge.279.33 Tabebuia rosea As directed by Engineer in charge.279.34 Terminalia Arjuna As directed by Engineer in charge.279.35 Terminalia crenulata As directed by Engineer in charge.279.36 Terminalia mantaley As directed by Engineer in charge.279.37 Wrightia tinctoria As directed by Engineer in charge.279.38 Ornamental trees

Bauhinea purpurea/ AlbaAs directed by Engineer in charge.

279.39 Cassia fistula As directed by Engineer in charge.279.40 Cassia javanica As directed by Engineer in charge.279.41 Ficus elastica As directed by Engineer in charge.279.42 Ficus lyrata As directed by Engineer in charge.279.43 Ficus maccalendii aureum As directed by Engineer in charge.279.44 Filicium decipens As directed by Engineer in charge.279.45 Jacaranda mimosifolia As directed by Engineer in charge.279.46 Lagerstromia flosregine As directed by Engineer in charge.279.47 Malaleuca bracteata As directed by Engineer in charge.279.48 Mesua ferrea As directed by Engineer in charge.279.49 Michelia champaka As directed by Engineer in charge.279.50 Plumeria Alba As directed by Engineer in charge.279.51 Plumeria Rubra As directed by Engineer in charge.279.52 Palms Areca

catechuAs directed by Engineer in charge.

279.53 Chamaerops humilis As directed by Engineer in charge.279.54 Chrysalidocarpus lutescens As directed by Engineer in charge.279.55 Cycus circinalis As directed by Engineer in charge.279.56 Cycus revoluta As directed by Engineer in charge.279.57 Licuala grandis As directed by Engineer in charge.279.58 Phoenix sylvestris As directed by Engineer in charge.279.59 Ptychosperma macarthuri As directed by Engineer in charge.279.60 Rhapis excelsa As directed by Engineer in charge.279.61 Washingtonia robusta As directed by Engineer in charge.279.62 Wodyetia bifureata As directed by Engineer in charge.

279 Shrubs Sapling of small & medium ornamental flowering plants, Thuja, Cupresus, Ornamental ficus,Mussanda etc.- Acalypha godseffiana "Compacta"


279.1 Acalypha nispaniolae As directed by Engineer in charge.279.2 Acalypha wilkesiana rosea As directed by Engineer in charge.279.3 Agapanthus africanus As directed by Engineer in charge.279.4 Agave attenuata As directed by Engineer in charge.279.5 Agave augustifolia variegated As directed by Engineer in charge.279.6 Allamanda nerifolia dwarf As directed by Engineer in charge.

279.7 Allocasia macrorhizza As directed by Engineer in charge.279.8 Alpinea zurumbet variegata As directed by Engineer in charge.279.9 Angelonia augustifolia As directed by Engineer in charge.

279.10 Barleria lawii As directed by Engineer in charge.279.11 Barleria montana As directed by Engineer in charge.279.12 Bougainvillea torchglow As directed by Engineer in charge.279.13 Calliandra portoricensis hybrid As directed by Engineer in charge.279.14 Coleus blumei As directed by Engineer in charge.279.15 Crossandra undulaefolia soundarya As directed by Engineer in charge.279.16 Duranta repens As directed by Engineer in charge.279.17 Eranthemum laxiflorum As directed by Engineer in charge.279.18 Euphorbia leucocephala As directed by Engineer in charge.279.19 Euphorbia milli hybrid 'red' As directed by Engineer in charge.279.20 Furcraea gigantia As directed by Engineer in charge.279.21 Galphimin glauca As directed by Engineer in charge.279.22 Hamelia patens As directed by Engineer in charge.279.23 Hedychium coronarium As directed by Engineer in charge.279.24 Hibiscus rosa-sinensis As directed by Engineer in charge.279.25 Ixora singaporensis As directed by Engineer in charge.279.26 Jasminum sambac As directed by Engineer in charge.279.27 Murraya exotica As directed by Engineer in charge.279.28 Pedilanthus tithymaloides variegated As directed by Engineer in charge.279.29 Pentas lanceolata 'blue' / 'red' As directed by Engineer in charge.279.30 Phyllanthus nivosus 'Compacta' As directed by Engineer in charge.279.31 Pleomele reflexa As directed by Engineer in charge.279.32 Plumbago auriculata 'blue' As directed by Engineer in charge.279.33 Pseudeanthemum reticulatum As directed by Engineer in charge.279.34 Rosa summer show/Rosa hakun As directed by Engineer in charge.279.35 Sansevieria guineensis 'Variegata' As directed by Engineer in charge.279.36 Schefflera arbonicola 'variegated' As directed by Engineer in charge.279.37 Tabernaemontana coronaria variegated dwarf As directed by Engineer in charge.279.38 Tabernaemontana coronaria double As directed by Engineer in charge.279.39 Tabernaemontana coronaria Mini As directed by Engineer in charge.279.40 Thunbergia erecta As directed by Engineer in charge.279.41 Bamboo Bamboo

variegated dwarf As directed by Engineer in charge.

279.42 Bambusa ventricosa As directed by Engineer in charge.279.43 Bambusa vulgaris As directed by Engineer in charge.279.44 Tall Shrubs

Bauhinia tomentosaAs directed by Engineer in charge.

279.45 Caesalpinea pulcherima As directed by Engineer in charge.279.46 Cassia Biflora As directed by Engineer in charge.279.47 Gardenia jasminoid As directed by Engineer in charge.279.48 Holarrhena antidysenterica As directed by Engineer in charge.279.49 Jatropha pandurifolia As directed by Engineer in charge.279.50 Lagerstroemia indica As directed by Engineer in charge.279.51 Lantana camara (yellow) As directed by Engineer in charge.279.52 Manihot esculenta 'Variegata' As directed by Engineer in charge.279.53 Mussaenda erythrophylla As directed by Engineer in charge.279.54 Nerium oleander Alba / rosea As directed by Engineer in charge.279.55 Plumeria pudica As directed by Engineer in charge.279.56 Tecomaria capensis As directed by Engineer in charge.279.57 Vitex negundo As directed by Engineer in charge.279.58 Yucca silver / variegated / dwarf As directed by Engineer in charge.

280 Common Ornamental shrubs for Shrubbery. (1'ft.grown in poly bags)


281 Ground Covers Ground Cover e.g. Lantana, Syngonium, Wedelia, Ipomoea Pothas, Chlorophytum. Common Ferns etc.- Agave americana variegated


281.1 Alteranthera variegated /red species variety As directed by Engineer in charge.281.2 Alternanthera 'Snow top' As directed by Engineer in charge.281.3 Aptenia cordifolia (red) As directed by Engineer in charge.281.4 Asperagus Springeri species As directed by Engineer in charge.281.5 Callisia repens As directed by Engineer in charge.281.6 Chlorophytum laxum As directed by Engineer in charge.281.7 Cuphea hyssopifolia As directed by Engineer in charge.281.8 Cyperus alternifolius As directed by Engineer in charge.281.9 Dianella tasmanica variegated As directed by Engineer in charge.

281.10 Senecio cineraria silver dust As directed by Engineer in charge.281.11 Lantana sellowiana white As directed by Engineer in charge.281.12 Nephrolepis exaltata 'childsii' / double species As directed by Engineer in charge.281.13 Rhoeo tricolour As directed by Engineer in charge.281.14 Rusellia juncea As directed by Engineer in charge.281.15 Salvia farinacea As directed by Engineer in charge.281.16 Setcreasea purpurea As directed by Engineer in charge.281.17 Verbina mix colour As directed by Engineer in charge.281.18 Vinca red / rosea As directed by Engineer in charge.281.19 Tabernaemontana coronaria 'Mini' As directed by Engineer in charge.281.20 Wedelia trilobata As directed by Engineer in charge.281.21 Zephranthus candida As directed by Engineer in charge.281.22 Gardenia jasminoid dwarf As directed by Engineer in charge.281.23 Hymanocalis sp As directed by Engineer in charge.281.24 Climbers and Creepers

Thunbergia laurifolia BlueAs directed by Engineer in charge.

281.25 Allamanda cathartica As directed by Engineer in charge.281.26 Bignomia purpurea As directed by Engineer in charge.281.27 Bouganinvillea peruviana As directed by Engineer in charge.281.28 Clematis gouriana As directed by Engineer in charge.281.29 Cryptostegia grandiflora As directed by Engineer in charge.281.30 Ficus pumila variegated As directed by Engineer in charge.281.31 Jacquemontia violacea As directed by Engineer in charge.281.32 Jasminum auriculatum As directed by Engineer in charge.281.33 Jasminum pubescence As directed by Engineer in charge.281.34 Petrea volubilis As directed by Engineer in charge.281.35 Pseudocalymma alliaceum As directed by Engineer in charge.281.36 Pyrostegia venusta As directed by Engineer in charge.281.37 Grasses

Antropogan citratusAs directed by Engineer in charge.

281.38 Cortaderia selloana As directed by Engineer in charge.281.39 Opheopogan jaburan vittatus variegated As directed by Engineer in charge.281.40 Opheopogan japonicus 'Nanus' As directed by Engineer in charge.281.41 Paspalum notatum As directed by Engineer in charge.281.42 Pennisetum foxtrot As directed by Engineer in charge.281.43 Pogonetherum paniceum As directed by Engineer in charge.281.44 Zoyasia japonica matrella As directed by Engineer in charge.281.45 Zoysia tenuifolia As directed by Engineer in charge.281.46 Areca Palm (4-5 feet) As directed by Engineer in charge.281.47 Ready to fix Lawn turf in slabs or rolls As directed by Engineer in charge.

282 COMPLETED HORTICULTURE ITEMS Praparing Lawn(30 cm.depth):-Excavating the ground to a required depth of 30cms,removing & conveying unwanted stuff to a required distances as directed.filling fresh garden soil/slit & manure in excavated area in 3:1 proportion to a height of 30cms.Mixing garden soil and manure thoroughly well,levelling,watering on previous night.Planting required variety of lawn grass as directed and maintaining till well established by watering,weeding,clipping,rolling,complete.


283 Preparing Lawn (20 cm) depth:-Excavating the ground to a required depth of 20cms, removing &conveying unwanted stuff to a required distance as directed.Filling fresh garden soil/slit &manure in excavated area in 3:1 proportion to a height of 20cms.Mixing garden soil and manure thoroughly well, levelling, watering on previous night. Planting reqiured variety of lawn grass as directed and maintaing till well established by watering, weeding, clipping, rolling, etc. complete.


284 Preparing instant Lawn:-Excavating the ground to a required depth of 20cms, removing &conveying unwanted stuff to a required distance as directed.Filling fresh garden soil/slit7 manure in excavated area in 3:1 proportion to a height of 20cms.Mixing garden soil and manure thoroughly well,levelling,watering on previous night.Planting required variety of lawn grass as directed and maintaining till well established by watering,weeding,clipping,rolling,etc.complete.


285 Preparing Edging or Border:- Excavating the ground to a required depth of 20 cms.,in the required area.,removing and conveying unwanted stuff,rubbish to the required distance as directed.Filling the excavated part with fresh soil and manure in 3:1 proportion to a required height to 20 cms.Mixing,levelling,watering the same.Planting rooted edging/border plants at distance of 20 cms.apart watering,stiring of soil replacing casualties,pruning if necessary etc.complete.


286 Planting clipped Hedge:- Excavating the ground to a required depth of 30 cmt, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and Planting hedge plant of required species in two rows. Distance between two rows & between two cutting will be 25cms. Maintaining till well established by watering, weeding, stirring the soil and clipping if necessary etc.complete.


287 Preparing flower Bed:- Excavating the ground to the required depth of 30cms, Removing and conveying unwanted stuff to a required distance as directed, Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30 cms Mixing garden soil and manure thoroughly well,levelling,watering, on previous night. Planting seedlings of required annuals 25cms. apart Maintaining till well established by watering, weeding, stirring replacing of casualties etc,complete.


288 Preparing Canna Bed:- Excavating the ground to the required depth of 30cms. Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a required height of 30cms. Mixing garden soil & manure thoroughly well, levelling, watering on previous night. Planating well developed Canna rhyzomes 40 cms apart. Maintaing till well established by watering weeding,stirring, replacing, casualties etc.complete.


289 Preparing shrubbery:- Excavating the ground to required depth of 30 cms, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & Manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil & manure thoroughly well levelling, watering on previous night. Planting well developed shrubs plant 0.5 Mtrs. apart as directed and maintaining till well established by watering, weeding. stirring, replacing casualties etc. complete.


290 Rose Plant: - Excavating pit with size 0.3 X 0.3 X 0.3 m. Removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and manure in 3:1 proportion to a height of 0.3m.mixing the soil & manure thoroughly well, levelling watering on previous night. Planting 40 to 50 cms. height healthy plant of required rose variety. Maintaining till well established by watering, weeding, stirring, prunning, replacing the casualties etc.complete.


291 Mogra Plant / Creepers/Climbers :- Excavating pit with size 0.3m X 0.3m X 0.3m, removing and conveying unwanted stuff to a required distance as directied. Filling the poit with approved excavated material upto a height of 0.15 mtr and remaining height of 0.15 mtr with fresh garden soil and manure in 3:1 proportion, mixing soil and manure thoroughly well levelling watering on previous night. Planting one or two year old healthy plant as per specifications Maintaining till well established by watering weeding prunning, stirring, replacing casualties etc complete.


292 Planting large flowering/shady trees (Ht.1 mtr.) Digging pit with size 0.9m x 0.9m x 0.9m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m and remaining height of 0.60m with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure throughly well, levelling as directed watering previous night, planting one to two year old minimum 1 Mtr height, healthy trees sapling as per specifications, Maintaining till well established by watering weeding stirring of soil replacing of casualties etc complete.


293 Planting large flowering/shady trees (Ht.2 mtr.) Digging pit with size 0.9m x 0.9m x 0.9m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m and remaining height of 0.60m with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure throughly well, levelling as directed watering previous night, planting two to three year old minimum 2.0 Mtr height, healthy trees sapling as per specifications, Maintaining till well established by watering weeding stirring of soil replacing of casualties etc complete.


294 Planting small and medium size ornamental/flowering plant:- digging pit with size 0.6mX0.6mX0.6m,removing and conveying unwanted stuff to a required distance as directed.Filling the pit with fresh garden soil & Farm Yard Manure upto a height of 0.60m.in 3:1 proportion.Mixing soil and Manure thoroughly well,levelling,watering on previous night.Planting one to two year old healthy plant saplings as per specification.Maintaining till well established by watering,stirring,of soil and manure,replacing casualties,etc.complete.


295 Preparing ground covers:-Excavating the ground to a required depth of 20cms.Removing &conveying unwanted stuff,rubbish to the required distance as directed.Filling the excavated area with fresh garden soil & F.Y.Manure in 3:1 proportion to a height of 20 cms.Mixing,levelling,watering the same previous night.Planting suitable ground covers as directed in staggering pattern,distance between two rows 25 cms,watering & maintaing till well established


296 IRRIGATION Providing,Installing,Testing and Commissioning of Landscape Irrigation System including following items1) VFD Pumping system including pumps,VFD Control panel,pressure tanks,pressure switches,necessary valves,cabling,piping and fixrures


2) Filtration system including sand and disk filters of appropriate capacity, auto backwashing system,common headers,necessary valves, pressure relief valves,piping and fittings.3) Control valves likebutterfly valves,ball valves,air valves, flush valves,isolating valvesetc of appropriate size with necessary fittings.4) Piping with HDPE, PVC, UPVC pipes of 110mm ,90mm,75mm,63mm,40mm and 6 kg rating with necessary fittings and accessories.5) Popup sprinklers of various diameters 14 to 16 m, 10to12 m, 5 to 7 m, 2 to 5 m, both gear driven and spray type along with swing joints,shrub riser assemblies and necessary fittings and accessories.6) Drip system with inline poly tube,plain poly tube and external drippers,microsprinklers, spray jets with stake/stands, subsurface inline tubing,extension tubes,tube holding stakes and necessary fittings and accessories.7) Automation system with controllers, solenoid valves,necessary cabling,outdoor enclosures,eartings,decoders,casing pipes of pvc and hdpe,with necessary fittings and accessories.8) Valve boxes, valve chambersfor enclosing valves of appropriate size with necessary base and fixtures.9) Quick coupling garden outlets with necessary fittings and accessories.10) Water meter of appropriate size with necessary fittings and accessories.11) Civil works like digging of trenches in all strata,foundation for filters, pumps, road crossings and sleeves etc with necessary materials.

Special Note Crushed sand of specified quality as approved by Engineer in charge

shall be permitted instead of river sand in all concrete and other items except plastering works with prior permission of Engineer in charge. Rate of item shall be reduced accordingly.

(Please Read Section-7 of SBD as Below)

SECTION – 7 BILL OF QUANTITIES

(from Page No.163 to 273)

SR. No. ITEM OF WORK ESTIMED QUANTITY

UNIT RATE AMOUNT

1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means.

61487.16 Cum

1.1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. b. Lift from 1.50m to 3.00

10806.38 Cum

2 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Mean- A. Lift upto 1.50m

25 Cum

2.1 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Mean- B. Lift from 1.50m to 3.00

1746.57 Cum

3 Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Manual Means

40 Cum

3.1 Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. By Manual Means B. From 1.50m. TO 3.00m.

1746.57 Cum

4 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Manual Means

80.14 Cum

4.1 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete B. From 1.50m. TO 3.00m.

2248.63 Cum

5 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

1604.53 Cum

6 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete.

44866.4 Cum

7 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

11243.45 Cum

8 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.- GROUND FLOOR

7.5 MT

8.1 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.- THIRD FLOOR

0.5 MT

9 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.- GROUND FLOOR

8.25 MT

9.1 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.-THIRD FLOOR

88.93 MT

10 Providing and Laying in situ cement concrete M-10(1:3:6) of trap/granite /quartzite/gneiss metal for foundation And bedding including pywwod/steel formork, bailing out water, compacting ,finishing uneven and honeycombed surfaces cement etc. complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surfaces only Newly laid concrete shall be covered by gunny bag,plastic Tarpaulin,Etc. (Wooden Centering Not Allowed) Newly laid concrete shall be covered by gunny bag,plastic Tarpaulin,Etc. (Wooden Centering Not Allowed)

9742.19 Cum

11 Providing and casting in situ cement concrete of M-25 grade of trap / granite /quartzite/ gneiss metal in foundations like raft grillages strip foundations and footings of R.C.C. column steel stanchions including bailing out water plywood / steel formwork compaction curing and roughning the surfaces if special finish to be provided finishing neven and honeycombed surfaces with c.m. 1:3 of sufficient minium thickness to give snooth and even surface etc. complete.(Excluding reinforcement and structural steel with cover block).

7607.18 Cum

12 Providing and casting in situ cement concrete M25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- GROUND FLOOR

1914.26 Cum

12.1 Providing and casting in situ cement concrete M25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- FIRST FLOOR

674.51 Cum

12.2 Providing and casting in situ cement concrete M25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- SECOND FLOOR

475.21 Cum

12.3 Providing and casting in situ cement concrete M25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- THIRD FLOOR

299.79 Cum

13 Providing and casting in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- GROUND FLOOR

2450.94 Cum

13.1 Providing and casting in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- FIRST FLOOR

826.72 Cum

13.2 Providing and casting in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.-SECOND FLOOR

455.12 Cum

13.3 Providing and casting in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- THIRD FLOOR

241.65 Cum

14 Providing & casting in situ cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting , curing , finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- GROUND FLOOR

214.44 Cum

14.1 Providing & casting in situ cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting , curing , finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.-FIRST FLOOR

120.20 Cum

14.2 Providing & casting in situ cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting , curing , finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- SECOND FLOOR

104.72 Cum

14.3 Providing & casting in situ cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting , curing , finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- THIRD FLOOR

68.10 Cum

15 GROUNDProviding and casting in situ cement concrete M25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- FLOOR

1336.27 Cum

15.1 Providing and casting in situ cement concrete M25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- FIRST FLOOR

943.02 Cum

15.2 Providing and casting in situ cement concrete M25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- SECOND FLOOR

528.83 Cum

15.3 Providing and casting in situ cement concrete M25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- THIRD FLOOR

255.98 Cum

15 A Providing and casting in situ cement concrete M30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- GROUND FLOOR

835.02 Cum

15 A 1 Providing and casting in situ cement concrete M30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- FIRST FLOOR

71.15 Cum

15 A 2 Providing and casting in situ cement concrete M30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. - SECOND FLOOR

34.27 Cum

15 A 3 Providing and casting in situ cement concrete M30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.- THIRD FLOOR

42.06 Cum

16 Providing and casting in situ cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)- GROUND FLOOR

102.82 Cum

16.1 Providing and casting in situ cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)- FIRST FLOOR

78.10 Cum

16.2 Providing and casting in situ cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)- SECOND FLOOR

48.54 Cum

16.3 Providing and casting in situ cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)- THIRD FLOOR

36.72 Cum

17 Providing and casting in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blockscompacting , curing , finishing & roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.With natural sand- GROUND FLOOR

1746.55 Cum

17.1 Providing and casting in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blockscompacting , curing , finishing & roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.With natural sand- FIRST FLOOR

87.59 Cum

17.2 Providing and casting in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blockscompacting , curing , finishing & roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.With natural sand- SECOND FLOOR

181.54 Cum

17.3 Providing and casting in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blockscompacting , curing , finishing & roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.With natural sand- THIRD FLOOR

84.63 Cum

18 Providing and casting in situ cement concrete M15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)- GROUND FLOOR

656.79 Cum

18.1 Providing and casting in situ cement concrete M15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)- FIRST FLOOR

20.68 Cum

18.2 Providing and casting in situ cement concrete M15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)- SECOND FLOOR

28.51 Cum

18.3 Providing and casting in situ cement concrete M15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)-THIRD FLOOR

35.24 Cum

19 Providing and fixing in position TMT / HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed- GROUND FLOOR

1538.613222

M.T.

19.1 Providing and fixing in position TMT / HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed- FIRST FLOOR

341.66 MT

19.2 Providing and fixing in position TMT / HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed -SECOND FLOOR

192.30 MT

19.3 Providing and fixing in position TMT / HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed- THIRD FLOOR

111.12 MT

20 Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.- GROUND FLOOR

2137.36 Cum

21 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete- GROUND FLOOR

5893.46 Cum

21.1 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete- FIRST FLOOR

2336.61 Cum

21.2 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete - SECOND FLOOR

1481.21 Cum

21.3 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete- THIRD FLOOR

889.47 Cum

22 Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) 1984, of size 500mm x 200mm x 150mm in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) 1972) 150 mm thick- GROUND FLOOR

227.94 Cum

22.1 Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) 1984, of size 500mm x 200mm x 150mm in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) 1972) 150 mm thick- FIRST FLOOR

203.33 Cum

22.2 Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) 1984, of size 500mm x 200mm x 150mm in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) 1972) 150 mm thick- SECOND FLOOR

148.11 Cum

22.3 Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) 1984, of size 500mm x 200mm x 150mm in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) 1972) 150 mm thick- THIRD FLOOR

91.97 Cum

23 Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.

246.18 Sqm

24 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/ including ponding test etc. complete- GROUND FLOOR

7839.3 Sqm

24.1 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/ including ponding test etc. complete- FIRST FLOOR

4952.89 Sqm

24.2 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/ including ponding test etc. complete- SECOND FLOOR

1283.38 Sqm

24.3 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/ including ponding test etc. complete- THIRD FLOOR

2367.05 Sqm

25 Providing and laying jointless PolydeeLM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP42Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of PolydeeLM @ 700 gms/sqm and applying 2nd coat of PolydeeLM @ 700 gms/sqm and finishing the same with sprinkling the AG10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/ etc. complete.- GROUND FLOOR

6693.93 Sqm

25.1 Providing and laying jointless PolydeeLM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP42Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of PolydeeLM @ 700 gms/sqm and applying 2nd coat of PolydeeLM @ 700 gms/sqm and finishing the same with sprinkling the AG10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/ etc. complete.- FIRST FLOOR

4952.89 Sqm

25.2 Providing and laying jointless PolydeeLM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP42Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of PolydeeLM @ 700 gms/sqm and applying 2nd coat of PolydeeLM @ 700 gms/sqm and finishing the same with sprinkling the AG10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/ etc. complete.- SECOND FLOOR

1768.43 Sqm

25.3 Providing and laying jointless PolydeeLM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP42Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of PolydeeLM @ 700 gms/sqm and applying 2nd coat of PolydeeLM @ 700 gms/sqm and finishing the same with sprinkling the AG10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/ etc. complete.- THIRD FLOOR

2367.05 Sqm

26 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/ including ponding test etc. complete.- GROUND FLOOR

670.98 Sqm

26.1 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/ including ponding test etc. complete.- FIRST FLOOR

594.11 Sqm

26.2 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/ including ponding test etc. complete.- SECOND FLOOR

414.20 Sqm

26.3 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/ including ponding test etc. complete.- THIRD FLOOR

304.24 Sqm

27 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.. In ceiling- GROUND FLOOR

12692.92 Sqm

27.1 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.. In ceiling- FIRST FLOOR

8457.97 Sqm

27.2 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.. In ceiling- SECOND FLOOR

3792.94 Sqm

27.3 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.. In ceiling- THIRD FLOOR

2048.71 Sqm

28 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete.- GROUND FLOOR

532.45 Sqm

28.1 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete - FIRST FLOOR

468.30 Sqm

28.2 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- SECOND FLOOR

285.39 Sqm

28.3 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- THIRD FLOOR

156 Sqm

29 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- GROUND FLOOR

25058.21 Sqm

29.1 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- FIRST FLOOR

15824.84 Sqm

29.2 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- SECOND FLOOR

12394.72 Sqm

29.3 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding and curing etc. complete- THIRD FLOOR

5299.86 Sqm

30 Providing and applying gypsum plaster (with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.- GROUND FLOOR

37051.11 Sqm

30.1 Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.- FIRST FLOOR

24659.98 Sqm

30.2 Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.- SECOND FLOOR

13723.75 Sqm

30.3 Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.- THIRD FLOOR

7348.59 Sqm

31 Providing external cement plaster in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced / funty plaster treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding etc.complete.- GROUND FLOOR

32148.83 Sqm

31.1 Providing external cement plaster in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced / funty plaster treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding etc.complete.- FIRST FLOOR

13103.37 Sqm

31.2 Providing external cement plaster in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced / funty plaster treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding etc.complete.- SEOND FLOOR

9867.43 Sqm

31.3 Providing external cement plaster in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced / funty plaster treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days including 22 gauge GI Chicken Mesh / Fiber Mesh 30 cm. width at the junction of R.C.C members and brick work, scaffolding etc.complete - THIRD FLOOR

6346.5 Sqm

32 Providing and applying Texture plaster with finishing with Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)- GROUND FLOOR

23595.85 Sqm

32.1 Providing and applying Texture plaster with finishing with Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)- FIRST FLOOR

13103.37 Sqm

32.2 Providing and applying Texture plaster with finishing with Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)- SEOND FLOOR

9867.43 Sqm

32.3 Providing and applying Texture plaster with finishing with Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)- THIRD FLOOR

6345.50 Sqm

33 Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete

6 Sqm

34 Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally /square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Natural Sand

575.84 Sqm

36 Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 45 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.- GROUND FLOOR

3211.68 Sqm

36.1 Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 45 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.- FIRST FLOOR

2210.56 Sqm

36.2 Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 45 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.- SEOND FLOOR

1687.86 Sqm

36.3 Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 45 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.- THIRD FLOOR

932.54 Sqm

37 Providing and laying marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for flooring in required pattern on bed of C.M. 1:6 including neat white / coloured cement slurry , curing polishing, cleaning complete.(White makrana marble)

2 Sqm

38 Providing and laying marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for flooring in required pattern on bed of C.M. 1:6 including neat white / coloured cement slurry , curing polishing, cleaning complete.(Other than white makrana marble)- GROUND FLOOR

189.20 Sqm

38.1 Providing and laying marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for flooring in required pattern on bed of C.M. 1:6 including neat white / coloured cement slurry , curing polishing, cleaning complete.(Other than white makrana marble)- FIRST FLOOR

47.50 Sqm

38.2 Providing and laying marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for flooring in required pattern on bed of C.M. 1:6 including neat white / coloured cement slurry , curing polishing, cleaning complete.(Other than white makrana marble)- SEOND FLOOR

12 Sqm

39 Providing and fixing marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for dado and skirting after making the required portion in level, in cement plaster 1:4 and fixing the slabs with ready made adhesive including filling joints with neat approved coloured cement slurry, curing polishing, cleaning complete.(White makrana marble)

0.20 Sqm

40 Providing and fixing marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for dado and skirting after making the required portion in level, in cement plaster 1:4 and fixing the slabs with ready made adhesive including filling joints with neat approved coloured cement slurry, curing polishing, cleaning complete.(Other than white makrana marble)- GROUND FLOOR

61.50 Sqm

40.1 Providing and fixing marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for dado and skirting after making the required portion in level, in cement plaster 1:4 and fixing the slabs with ready made adhesive including filling joints with neat approved coloured cement slurry, curing polishing, cleaning complete.(Other than white makrana marble)- FIRST FLOOR

15.60 Sqm

40.2 Providing and fixing marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for dado and skirting after making the required portion in level, in cement plaster 1:4 and fixing the slabs with ready made adhesive including filling joints with neat approved coloured cement slurry, curing polishing, cleaning complete.(Other than white makrana marble)- SEOND FLOOR

5 Sqm

41 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.- GROUND FLOOR

5680.46 Sqm

41.1 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.- FIRST FLOOR

1553.17 Sqm

41.2 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.- SECOND FLOOR

636.15 Sqm

41.3 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.- THIRD FLOOR

269.24 Sqm

42 Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete- GROUND FLOOR

5670.53 Sqm

42.1 Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete- FIRST FLOOR

1543.24 Sqm

42.2 Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete- SECOND FLOOR

636.15 Sqm

42.3 Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete- THIRD FLOOR

269.24 Sqm


865.42 Sqm


97.80 Sqm

43.2 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.- SECOND FLOOR

40.37 Sqm


21.98 Sqm

44 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish- GROUND FLOOR

39.68 Sqm

44.1 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish- FIRST FLOOR

20.28 Sqm

44.2 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish- SECOND FLOOR

3.24 Sqm

45 Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete-GROUND FLOOR

24.30 Sqm

45.1 Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete-FIRST FLOOR

23.40 Sqm

46 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.- GROUND FLOOR

297.84 Sqm

46.1 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.- FIRST FLOOR

223.98 Sqm

46.2 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.- SECOND FLOOR

140.10 Sqm

46.3 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.- THIRD FLOOR

67.98 Sqm

47 Providing and laying vitrified mirror / glossy finish tiles decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring- GROUND FLOOR

8523.60 Sqm

47.1 Providing and laying vitrified mirror / glossy finish tiles decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring- FIRST FLOOR

6373.29 Sqm

47.2 Providing and laying vitrified mirror / glossy finish tiles decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring- SECOND FLOOR

3399.87 Sqm

47.3 Providing and laying vitrified mirror / glossy finish tiles decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring- THIRD FLOOR

1572.21 Sqm

48 Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting - GROUND FLOOR

961.84 Sqm

48.1 Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting- FIRST FLOOR

464.31 Sqm

48.2 Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting- SECOND FLOOR

278.67 Sqm

48.3 Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting- THIRD FLOOR

170.25 Sqm

49 Providing and laying vitrified matt fininsh tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring- GROUND FLOOR

1233.92 Sqm

49.1 Providing and laying vitrified matt fininsh tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring- FIRST FLOOR

692.09 Sqm

49.2 Providing and laying vitrified matt fininsh tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring- SECOND FLOOR

525.65 Sqm

49.3 Providing and laying vitrified matt fininsh tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring- THIRD FLOOR

304.24 Sqm

50 Providing and laying vitrified stone effect finish tiles of RAK/Kajaria/ Nitco/ Asian or equivalent make having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring

1618.27 Sqm

51 Providing and laying vitrified stone effect finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting

42.77 Sqm

52 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. completee- GROUND FLOOR

7314.80 Sqm


284.44 Sqm


184.28 Sqm

53.2 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.- SECOND FLOOR

137.03 Sqm


75.60 Sqm

54 Providing Chamfer Of Required size to granite stone including fine polishing and cleaning etc. complete.- GROUND FLOOR

684.55 RMT

54.1 Providing Chamfer Of Required size to granite stone including fine polishing and cleaning etc. complete.- FIRST FLOOR

544.50 RMT

54.2 Providing Chamfer Of Required size to granite stone including fine polishing and cleaning etc. complete.- SECOND FLOOR

496.80 RMT

54.3 Providing Chamfer Of Required size to granite stone including fine polishing and cleaning etc. complete.- THIRD FLOOR

237.60 RMT

55 Providing Sills of various material 20 mm to 25 mm thick on a bed of C.M. 1:4 including cement float , filling joints with neat cement slurry curing polishing rounding edges cleaning etc. complete Granite- GROUND FLOOR

525.35 Sqm

55.1 Providing Sills of various material 20 mm to 25 mm thick on a bed of C.M. 1:4 including cement float , filling joints with neat cement slurry curing polishing rounding edges cleaning etc. complete Granite- FIRST FLOOR

192.27 Sqm

55.2 Providing Sills of various material 20 mm to 25 mm thick on a bed of C.M. 1:4 including cement float , filling joints with neat cement slurry curing polishing rounding edges cleaning etc. complete Granite- SECOND FLOOR

88.84 Sqm

55.3 Providing Sills of various material 20 mm to 25 mm thick on a bed of C.M. 1:4 including cement float , filling joints with neat cement slurry curing polishing rounding edges cleaning etc. complete Granite- THIRD FLOOR

32.46 Sqm

56 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.- GROUND FLOOR

37751.11 Sqm

56.1 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.- FIRST FLOOR

24025.86 Sqm

56.2 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.- SECOND FLOOR

12202.45 Sqm

56.3 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.- THIRD FLOOR

7348.59 Sqm

57 Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete- GROUND FLOOR

36826.72 Sqm

57.1 Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete- FIRST FLOOR

24025.86 Sqm

57.2 Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete- SECOND FLOOR

12202.45 Sqm

57.3 Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete- THIRD FLOOR

7348.59 Sqm

58 Providing and applying two coats of Appex Ultima white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.- GROUND FLOOR

23495.85 Sqm

58.1 Providing and applying two coats of Appex Ultima white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.- FIRST FLOOR

13103.37 Sqm

58.2 Providing and applying two coats of Appex Ultima white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.- SECOND FLOOR

9867.43 Sqm

58.3 Providing and applying two coats of Appex Ultima white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.- THIRD FLOOR

6336.50 Sqm

59 Providing and fixing Green colour coated Zincalume ( R ) AZ150 (min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium ¬Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950¬-1050 mm effective cover width and nominal 25¬30 mm deep ribs with subtle square fluting in the five pan at nominal 180¬-250 mm center¬ to ¬center. The end rib shall be designed for anti¬capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc¬Tin alloy coated, Hex head, self¬drilling screw etc. complete. (weight of profile 4.52 kg/sqm)

900 Sqm

60 Providing and fixing Green colour coated Zincalume ( R ) AZ150 (min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium ¬Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950¬-1050 mm effective cover width and nominal 25¬30 mm deep ribs with subtle square fluting in the five pan at nominal 180¬-250 mm center¬ to ¬center. The end rib shall be designed for anti¬capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc¬Tin alloy coated, Hex head, self¬drilling screw etc. complete. (weight of profile 4.52 kg/sqm).- GROUND FLOOR

3 Rmt

60.1 Providing and fixing Green colour coated Zincalume ( R ) AZ150 (min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium ¬Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950¬-1050 mm effective cover width and nominal 25¬30 mm deep ribs with subtle square fluting in the five pan at nominal 180¬-250 mm center¬ to ¬center. The end rib shall be designed for anti¬capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc¬Tin alloy coated, Hex head, self¬drilling screw etc. complete. (weight of profile 4.52 kg/sqm)..- SECOND FLOOR

36 Rmt

61 Providing and fixing in position structural glazing consisting of main frame of powder coated jindal or equivalent make alluminium curain wall section 48 x 64 mm &sub frame of 25 x 25 x 2 mm powder coated alluminium SHS by using structural silicon of Dow Corring 995 weather silicon coirining 785, Spacer tape 6 mm x 6 mm excluding glass inclusive of labour etc.(With Glass)

3 Sqm

62 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour anodized with box- GROUND FLOOR

271.38 Sqm

62.1 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour anodized with box- FIRST FLOOR

282.45 Sqm

62.2 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour anodized with box- SECOND FLOOR

224.49 Sqm

62.3 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour anodized with box- THIRD FLOOR

107.10 Sqm

63 Providing and fixing in position Colour anodized coated aluminium louvered windows / ventilator of various sizes with Colour anodised as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.- GROUND FLOOR

132.30 Sqm

63.1 Providing and fixing in position Colour anodized coated aluminium louvered windows / ventilator of various sizes with Colour anodised as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.- FIRST FLOOR

122.76 Sqm

63.2 Providing and fixing in position Colour anodized coated aluminium louvered windows / ventilator of various sizes with Colour anodised as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.- SECOND FLOOR

56.16 Sqm

63.3 Providing and fixing in position Colour anodized coated aluminium louvered windows / ventilator of various sizes with Colour anodised as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.- THIRD FLOOR

36 Sqm

64 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.- GROUND FLOOR

1337.23 Sqm

64.1 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.- FIRST FLOOR

956.90 Sqm

64.2 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.- SECOND FLOOR

513.91 Sqm

64.3 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.- THIRD FLOOR

208.34 Sqm

65 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 63.5mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 3.3m center to center and two pipes of 12mm diameter fixed horizontally including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete.Note For item no. 58 to 60 prior approval of Superintending Engineer will be required- GROUND FLOOR

698.38 RMT.

65.1 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 63.5mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 3.3m center to center and two pipes of 12mm diameter fixed horizontally including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete.Note For item no. 58 to 60 prior approval of Superintending Engineer will be required- FIRST FLOOR

571.47 RMT.

65.2 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 63.5mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 3.3m center to center and two pipes of 12mm diameter fixed horizontally including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete.Note For item no. 58 to 60 prior approval of Superintending Engineer will be required- SECOND FLOOR

433.11 RMT.

65.3 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 63.5mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 3.3m center to center and two pipes of 12mm diameter fixed horizontally including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete.Note For item no. 58 to 60 prior approval of Superintending Engineer will be required- THIRD FLOOR

249.16 RMT.

66 Providing and fixing mat finish stainless steel lettering of various heights as directed by enginner incharge including material, labour, cleaning etc. complete.(From 30 to 45 cm height)

1.20 CmHt

67 Providing preconstructional antitermite treatment as per I.S. 6313 (PartII) treatment by treating the backfill in immediate contact with foundation/plinth filling top at the rate of 5 litres of emulsion concentrate of 0.5 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. ( AS per Item no. 22.42 of schedule of rates of NBO ) To add Chemicals as directed if necessary- GROUND FLOOR

31310.63 Sqm

68 Providing preconstructional/postconstructional antitermite treatment as per I.S. 6313 (PartI) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 60 cm deep at 15 cm c/c as close to the wall as possible & to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling & covering 10 years guarantee on bond paper. ( AS per Item no. 22.44 of schedule of rates of NBO ) To add Chemicals as directed if necessary- GROUND FLOOR

23663.15 Sqm

69 Removing Manglore tiled roof and ridge tiles with battens, ridge and barge boards, eaves boards etc. and stacking the materials as directed with all leads and lifts complete. Including removing wood work below

332 Sqm

70 Removing G.I. and A.C sheet roof covering and stacking them as and where directed in the compound, including scaffolding etc. complete.

1560 Sqm

71 Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete

2014.97 Cum

72 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete

1538 Sqm

73 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete

229.32 Nos

74 Dismantling brick masonry in Mud and stacking the materials as directed with all leads lifts etc. complete

357.42 Cum

75 Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etc. complete

1064.84 Cum

76 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.

1370 Sqm

77 Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete.

85 Rmt

78 Conveying materials including all lifts, laying in layers, breaking clods, dressing to the required lines, curves, grades and section for a lead of over2km inclusive from the site of excavation to the site of deposition as directed.

65325.75 Cum

79 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs.100/ with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )- GROUND FLOOR

1657.09 Sqm

80 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/ with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )- GROUND FLOOR

1284.99 Sqm

81 Providing and applying a base coat comprising of 1 Kg Polydee MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP40 and after drying, applying Polydee11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/ etc. complete.- GROUND FLOOR

5138.11 Sqm

81.1 Providing and applying a base coat comprising of 1 Kg Polydee MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP40 and after drying, applying Polydee11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/ etc. complete.- FIRST FLOOR

395.15 Sqm

81.2 Providing and applying a base coat comprising of 1 Kg Polydee MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP40 and after drying, applying Polydee11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/ etc. complete.- SECOND FLOOR

459.64 Sqm

81.3 Providing and applying a base coat comprising of 1 Kg Polydee MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP40 and after drying, applying Polydee11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/ etc. complete.- THIRD FLOOR

539.87 Sqm

82 Providing and fixing Italian glass mosaic tiles in gradation pattern as directed by engineer incharge in required position with redimade glass mosaic adhesive and grout on 12 mm thick cement plaster of C.M. 1:4 and neat cement float including filling joints, curing and cleaning etc. complete.- GROUND FLOOR

566.97 Sqm

83 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (Without mechanical gear)- GROUND FLOOR

101 Sqm

84 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete.- GROUND FLOOR

2962.77 Cum

85 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete.- GROUND FLOOR

525.11 Cum

86 Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete- GROUND FLOOR

2148.42 Sqm

87 Providing and laying in situ cement concrete M¬20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer . With natural sand.- GROUND FLOOR

2812.86 Cum

88 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means

944.40 Cum

89 Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. By Manual Means

944.40 Cum

92 Providing dry rubble stone pitching 23 cm (about 9" ) thick including all material, quarry spalls, labour etc. complete.

871 Sqm

93 Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm 8 guage thick and fixed 75 mm above Ground level on vertical M.S Angle of 40 x 40 x 6 mm size including excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M.c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm Angles both sides at every corner or bends embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.

174.40 RMT

94 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete - GROUND FLOOR

663.12 Sqm


24 Sqm


103.65 Sqm

97 Providing and fixing following rough finished machine cut stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thick bed mortar in C.M. 1:4 with neat cement float including filling joints

3 Sqm

with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.- Shahabad leather finished machine cut 30mm thick

97.1 Providing and fixing following rough finished machine cut stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thick bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.- Shahabad leather finished machine cut 50mm thick

5.40 Sqm

97.2 Providing and fixing following rough finished machine cut stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thick bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.- Kaddapa leather finished machine cut 25mm thick

8.10 Sqm

97.3 Providing and fixing following rough finished machine cut stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thick bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.- Kaddapa leather finished machine cut 50mm thick

10.50 Sqm


343.48 Sqm


527.50 Sqm

98 Proving and laying rough finished machine cut Stone flooring of approved shade and quality, 20 to 25 mm thick of required size in plain pattern at required location, level, slope as directed on a bed of 20 mm thick cement mortar 1:4 including, removing mortar, concrete, droppings, dust, loose particles, debris etc. cleaning and wetting base surface, cement float filling joints with neat cement slurry, pigment, curing, cutting, dressing, as directed washing and cleaning etc. complete. as per detailed drawing and design and as directed by Engineer in charge.- Shahabad leather finished machine cut (300 X 300) 30mm thick

221.23 Sqm

98.1 Proving and laying rough finished machine cut Stone flooring of approved shade and quality, 20 to 25 mm thick of required size in plain pattern at required location, level, slope as directed on a bed of 20 mm thick cement mortar 1:4 including, removing mortar, concrete, droppings, dust, loose particles, debris etc. cleaning and wetting base surface, cement float filling joints with neat cement slurry, pigment, curing, cutting, dressing, as directed washing and cleaning etc. complete. as per detailed drawing and design and as directed by Engineer in charge.- Kadappa stone (600X600) leather finished machine cut 30 mm thick

29 Sqm

99 Providing and fixing following rough finished hand tooled cobblestones 100 x 100 x 100 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge. - Granite Stone Cobbles.

679.22 Sqm


152.04 Sqm

100 Providing and fixing following rough finished hand tooled cobblestones 150 x 150 x 150 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge.- Granite Stone Cobbles.

87.82 Sqm


48.94 Sqm

101 Providing and fixing following rough finished hand tooled cobblestones 150 x 150 x 150 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge.

64 Sqm

101.1 Providing and fixing following rough finished hand tooled cobblestones 150 x 150 x 150 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge.

120 Sqm

102 Providing and fixing 20 mm thick following rough finished machine cut stone in Butching pattern of 75 mm width laid on layers as per detailed drawing and design and in required position. Stone fixing to be done in C.M. 1:4 (thickness of mortar at backing is 10 mm and in between stone is 6 mm.), with neat cement float including. filling joints with neat cement, cutting the stone if necessary, all specials like round edge tiles, curing, pignent, and cleaning washing etc complete.- Sahabad rough finished machine cut - 30mm thick

30 Sqm

102.1 Providing and fixing 20 mm thick following rough finished machine cut stone in Butching pattern of 75 mm width laid on layers as per detailed drawing and design and in required position. Stone fixing to be done in C.M. 1:4 (thickness of mortar at backing is 10 mm and in between stone is 6 mm.), with neat cement float including. filling joints with neat cement, cutting the stone if necessary, all specials like round edge tiles, curing, pignent, and cleaning washing etc complete. - Kadappa rough finished machine cut - 30mm thick

34.20 Sqm

102.2 Providing and fixing 20 mm thick following rough finished machine cut stone in Butching pattern of 75 mm width laid on layers as per detailed drawing and design and in required position. Stone fixing to be done in C.M. 1:4 (thickness of mortar at backing is 10 mm and in between stone is 6 mm.), with neat cement float including. filling joints with neat cement, cutting the stone if necessary, all specials like round edge tiles, curing, pignent, and cleaning washing etc complete. - Leather Finished Granite - 18 mm thick

2061.29 Sqm

103 Flooring and Wall Cladding in upto7mm GRIT Finish - Providing and apllying Grit Finish to walls or floor in designed patterns, sizes of panels etc, using type and size of Chips as per specifications, in cement grout of colour as per design, with material, labour, raking of grout etc complete as per directions of Site Engineer.- Grit Plaster - Kota Chips 5 mm size

6 Sqm

103.1 Flooring and Wall Cladding in upto7mm GRIT Finish - Providing and apllying Grit Finish to walls or floor in designed patterns, sizes of panels etc, using type and size of Chips as per specifications, in cement grout of colour as per design, with material, labour, raking of grout etc complete as per directions of Site Engineer. - Grit Plaster - Black Basalt Chips3 to 5 mm size

16 Sqm

103.02 Flooring and Wall Cladding in upto7mm GRIT Finish - Providing and apllying Grit Finish to walls or floor in designed patterns, sizes of panels etc, using type and size of Chips as per specifications, in cement grout of colour as per design, with material, labour, raking of grout etc complete as per directions of Site Engineer. - Grit Plaster - Kadappa Chips 5 mm size

6 Sqm

104 Providing and fixing of river pebbles of size 40-50 mm finishing to the inner surface of pebbles drain which shall be embedded in plain cement concrete of 1:4:8 of 100 mm thick as per detailed drawing and design in required position, slope, curve after making the surface to required level and maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge.

42.11 Sqm

105 Providing and fixing rough finished machine cut Kadappa Stone Kerb of approved colour and 285 x 450 x 50 mm thick embedded in PCC bedding as per detailed drawing and design and in required position after making the surface to required level in C.M. 1:4 and fixing the Stone Kerb with fine and uniform joint, joints filled with fine sand and neat cement, securing the free ends, maintaining the share curves, lines, cutting if necessary, all specials like round edge, curing and cleaning washing etc complete

376.11 Sqm

106 Providing and laying of stamp impression concrete in approved pattern and shade in curvilinear/linear profile on prepared sub base to required thickness as per manufacturer's specifications. Work to be carriedout as per directions of Architect / Engineer-in-charge.

1037.39 Sqm

107 Providing & laying A Class Wire Cut Clay brick masonry 230 mm thick and in Mass brickwork with brick having crushing strength 35 kg / Sq.cm. in C.M. 1:6 (1 O.P. cement : 6 sand), including racking out joints, curing, scaffolding only, staging, leads, lifts and packing the junction of wall with ceiling & beam with (1:3:6) grade concrete including necessary shuttering etc. complete. as directed.

1470 Sqm

108 Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed,200 to 250 sized polygonal stones in cement mortar 1:5, with 200 mm uniform groove and sunk pointing, acid wash, including projection bands upto 100m thick and 50mm projections

72 Sqm

109 Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed ,200 to 250 sized polygonal stones in cement mortar 1:5, with jointless finish, including acid wash, projection bands upto 100m thick and 50mm projections

578.27 Sqm

110 Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed , 200 to 250 by 400 to 450 sized RECTANGULAR stones in cement mortar 1:5, with 200 mm uniform groove, including projection bands upto 100m thick and 50mm projections.

153.60 Sqm

111 Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed , 200 to 250 by 400 to 450 sized RECTANGULAR stones in cement mortar 1:5, with jointless finish, including projection bands upto 100m thick and 50mm projections

291.54 Sqm

112 Providing and constructing, Black Basalt Stone COPING and MOULDING 150 thick, in Natural Stones, hand tooled FINE dressed, 450 wide and 300 long RECTANGULAR stones, with jointless finish

465.35 Sqm

113 Providing and constructing, Black Basalt FLAG STONE COPING / TREADS 100 thick, in Natural Stones, bush hand finish, 375 / 600wide and 900 long RECTANGULAR stones, with jointless finish

1128.77 Sqm

114 Providing and constructing, Flooring in SLATE Stone, 20 mm thick, polygonal stones 300 to 450 polygons, with 20 mm uniform joints filled with Epoxy Grout

626.75 Sqm

115 Polished Granite - Inlay Etching Work, in 40 mm thick stone, upto 900mm x 900mm size, with inlay upto 10mm deep.

2013.83 Sqm

116 WOODEN WINDOW WITH FRAME W (1.8 M X 1.85 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top, middle, bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle (S.S. Finish), Chetna or Esco Like Hinges (S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay (S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)

1.00 No.


16 Nos.


14 Nos.


4 Nos.


123 Nos.


98 Nos.


52 Nos.

118.3 WOODEN WINDOW WITH FRAME W2 (1.8 M X 1.85 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)

28 Nos.


30 Nos.


8 Nos.


4 Nos.


14 Nos.


10 Nos.


4 Nos.


32 Nos.


9 Nos.


4 Nos.

122 WOODEN WINDOW WITH FRAME W8 (1.5 m X 1.85 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

21 Nos.

122.1 WOODEN WINDOW WITH FRAME W8 (1.5 m X 1.85 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

21 Nos.

122.2 WOODEN WINDOW WITH FRAME W8 (1.5 m X 1.85 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

4 Nos.


1 Nos.


19 Nos.

124.1 WOODEN WINDOW WITH FRAME W11 (0.75 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed . - FIRST FLOOR .(Only wood will be supplied at free of cost in standard sections)

4 Nos.

125 WOODEN WINDOW WITH FRAME W22 (1.8 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed .(Only wood will be supplied at free of cost in standard sections)

1 Nos.


9 Nos.


4 Nos.


8 Nos.


8 Nos.


3 Nos.

129 WOODEN WINDOW WITH FRAME W16 (2.0 m X 1.50 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,middle,bottom & side rails of 125 mm x 40 mm thick. The work shall be done neat & complete with chetna or Esco Like Handle(S.S. Finish), Chetna or Esco Like Hinges(S.S. Finish), Chetna or Esco Like Tower Bolt (S.S. Finish), Chetna or Esco Like window stay(S.S. Finish), Flat GI Holdafast, 6 mm High performance glass complete with PU Polish as per dwg & as directed.- GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

11 Nos.


3 Nos.


1 Nos.


1 Nos.

133 WOODEN WINDOW WITH Only Grill W6 (1.5 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

13 Nos.

133.1 WOODEN WINDOW WITH Only Grill W6 (1.5 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed.- FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

14 Nos.

134 WOODEN WINDOW WITH Only Grill W10 (1 m X 1 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)

22 Nos.

134.1 WOODEN WINDOW WITH Only Grill W10 (1 m X 1 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

20 Nos.

134.2 WOODEN WINDOW WITH Only Grill W10 (1 m X 1 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

8 Nos.

134.3 WOODEN WINDOW WITH Only Grill W10 (1 m X 1 m) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed. - THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)

8 Nos.

135 WOODEN WINDOW WITH Only Grill W12 (0.75 M X 2.6 M) Fixing C.C. Superfine T.W. Window frame of size 150 mm x75 mm with FLAT GI Holdfast. The work shall be done neat & complete as per dwg & as directed.(Only wood will be supplied at free of cost in standard sections)

1 No.

136 DOOR WITH TEAK WOOD FRAME & SHUTTER (D1=1.80X2.75 m)Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder (S.S.Finish) , Flat GI Holdfast with 6 mm High Performance glass with PU Polish complete as per dwg & as directed.- GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

18 Nos.

136.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D1=1.80X2.75 m)Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder (S.S.Finish) , Flat GI Holdfast with 6 mm High Performance glass with PU Polish complete as per dwg & as directed.- FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

2 Nos.

137 DOOR WITH TEAK WOOD FRAME & SHUTTER (D2=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. veneer on both side,46 mm wide 15mm thick. lipping on four sides.The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder with (S.S.Finish), Flat GI Holdfast, 19 mm thick. plywood, for Veneer with PU Polishing 6 mm High Performance glass with PU Polish complete as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)

10 Nos.

138 DOOR WITH TEAK WOOD FRAME & SHUTTER (D3=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. veneer on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel.The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle (S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing with 6 mm High Performance glass complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

1 Nos.

138.1 :DOOR WITH TEAK WOOD FRAME & SHUTTER (D3=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. veneer on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel.The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle (S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing with 6 mm High Performance glass complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

1 Nos.

139 DOOR WITH TEAK WOOD FRAME & SHUTTER (D4=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast, with 6 mm High Performance glass with PU Polishing complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

5 Nos.

139.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D4=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast, with 6 mm High Performance glass with PU Polishing complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

7 Nos.

139.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D4=1.5X2.75 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast, with 6 mm High Performance glass with PU Polishing complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

5 Nos.

140 DOOR WITH TEAK WOOD FRAME & SHUTTER (D5=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature / Greenlam Deco Wood / True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top (S.S.Finish),Ozone Like Mortise lock Body + cylinder (S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing etc. complete as per dwg & as directed. - GROUND FLOOR(Only wood will be supplied at free of cost in standard sections)

13 Nos.

140.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D5=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing etc. complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

2 Nos.

141 DOOR WITH TEAK WOOD FRAME & SHUTTER (D6=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood / True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 750mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top(S.S.Finish), Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing, with 6 mm High Performance glass etc. complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

12 Nos.

141.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D6=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood / True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 750mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top(S.S.Finish), Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing, with 6 mm High Performance glass etc. complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

9 Nos.

141.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D6=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood / True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 750mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top(S.S.Finish), Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing, with 6 mm High Performance glass etc. complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

4 Nos.

142 DOOR WITH TEAK WOOD FRAME & SHUTTER (D7=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 1500mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish), Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top (S.S.Finish), Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing with 6 mm High Performance glass etc. complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

14 Nos.

142.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D7=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 1500mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top (S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood,Veneer with PU Polishing, 6 mm High Performance glass etc. complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

17 Nos.

142.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D7=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 1500mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing with 6 mm High Performance glass etc. complete as per dwg & as directed.- SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

4 Nos.

142.3 DOOR WITH TEAK WOOD FRAME & SHUTTER (D7=1.2X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with Vision Panel 1500mm wide.The work shall be done neat & complete with Ozone OGH 55 32/450 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-chetna Like 12mm dia. Of 300 mm length on top (S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish), Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing with 6 mm High Performance glass etc. complete as per dwg & as directed. - THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)

4 Nos.

143 DOOR WITH TEAK WOOD FRAME & SHUTTER (D8=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder (S.S.Finish),Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing etc. complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

98 Nos.

143.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D8=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder (S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing etc. complete as per dwg & as directed. - GROUND FLOOR- FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

36 Nos.

143.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D8=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder (S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing complete as per dwg & as directed. - GROUND FLOOR- SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

24 Nos.

143.3 DOOR WITH TEAK WOOD FRAME & SHUTTER (D8=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder (S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing complete as per dwg & as directed. - GROUND FLOOR- THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)

24 Nos.

144 DOOR WITH TEAK WOOD FRAME & SHUTTER (D9=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality on one Side,Laminate on One Side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing complete as per dwg & as directed. - GROUND FLOOR

9 Nos.

(Only wood will be supplied at free of cost in standard sections)

144.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D9=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality on one Side,Laminate on One Side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. Plywood, Veneer with PU Polishing complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

6 Nos.

144.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D9=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on one Side,Laminate on One Side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

2 Nos.

145 DOOR WITH TEAK WOOD FRAME & SHUTTER (D10=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with vision Panel 750mm wide. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing with 6 mm High Performance glass complete as per dwg & as directed. -GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

14 Nos.

145.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D10=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with vision Panel 750mm wide. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing with 6 mm High Performance glass complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

3 Nos.

145.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D10=1X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature /Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides with vision Panel 750mm wide. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,Flat GI Holdfast,19 mm thick. plywood for Veneer with PU Polishing with 6 mm High Performance glass complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

3 Nos.

146 DOOR WITH TEAK WOOD FRAME & SHUTTER (D11=0.75X2.1 M) Fixing C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,19 mm thick. plywood for Veneer with PU Polishing (Granite Frame Cost included in civil Item) complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

148 Nos.

146.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D11=0.75X2.1 M) Fixing C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,19 mm thick. plywood for Veneer with PU Polishing (Granite Frame Cost included in civil Item) complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

102 Nos.

146.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D11=0.75X2.1 M) Fixing C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,19 mm thick. plywood for Veneer with PU Polishing (Granite Frame Cost included in civil Item) complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

78 Nos.

146.3 DOOR WITH TEAK WOOD FRAME & SHUTTER (D11=0.75X2.1 M) Fixing C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Esco or Europa Like Night Latch,19 mm thick. plywood for Veneer with PU Polishing (Granite Frame Cost included in civil Item) complete as per dwg & as directed. - THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)

50 Nos.

147 DOOR WITH TEAK WOOD FRAME & SHUTTER (D12=0.9X2.4 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter,8mm thick. 150 mm wide wooden Batten, 4 mm thick. Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality on both side,46 mm wide 15mm thick. lipping on four sides. The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder (S.S.Finish), Esco or Europa Like Night Latch,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)

22 Nos.

148 DOOR WITH TEAK WOOD FRAME & SHUTTER (D13=0.90X2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. - GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

56 Nos.

148.1 DOOR WITH TEAK WOOD FRAME & SHUTTER (D13=0.90X2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

76 Nos.

148.2 DOOR WITH TEAK WOOD FRAME & SHUTTER (D13=0.90X2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. - SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

64 Nos.

148.3 DOOR WITH TEAK WOOD FRAME & SHUTTER (D13=0.90X2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. - THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)

56 Nos.

149 DOOR WITH TEAK WOOD FRAME & SHUTTER(D14= 1X 2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. -GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

21 Nos.

149.1 DOOR WITH TEAK WOOD FRAME & SHUTTER(D14= 1X 2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. -FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

28 Nos.

149.2 DOOR WITH TEAK WOOD FRAME & SHUTTER(D14= 1X 2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. -SECOND FLOOR (Only wood will be supplied at free of cost in standard sections)

24 Nos.

149.3 DOOR WITH TEAK WOOD FRAME & SHUTTER(D14= 1X 2.1 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. & 30 mm thick. block board shutter with Veneer of Duro-Nature signature/ Greenlam Deco Wood/ True Wood Veneer or equivalent quality Finish & Laminated Finish On Both Side,46 mm wide 15mm thick. lipping on four sides with . The work shall be done neat & complete with Ozone Like H type 150mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Mortise Lock Body+Cylinder(S.S.Finish), Ozone Like Aldrop,Esco or Europa Like Tower Bolt,19 mm thick. plywood for Veneer with PU Polishing complete as per dwg & as directed. -THIRD FLOOR (Only wood will be supplied at free of cost in standard sections)

16 Nos.

150 DOOR WITH TEAK WOOD FRAME & SHUTTER(D15= 2.40X 2.40 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Aldrop,Esco or Europa Like Tower Bolt with 6 mm High Performance glass with PU Polish complete as per dwg & as directed. -GROUND FLOOR (Only wood will be supplied at free of cost in standard sections)

4 Nos.

150.1 DOOR WITH TEAK WOOD FRAME & SHUTTER(D15= 2.40X 2.40 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Aldrop,Esco or Europa Like Tower Bolt with 6 mm High Performance glass with PU Polish complete as per dwg & as directed. - FIRST FLOOR (Only wood will be supplied at free of cost in standard sections)

4 Nos.

151 DOOR WITH TEAK WOOD FRAME & SHUTTER(D16= 2.00X 2.40 M) Fixing C.C. Superfine T.W. Door frame of size 150 mm x75 mm & 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with top,bottom & side rails of 150 mm x 40 mm thick. The work shall be done neat & complete with Ozone Like H type 300mm Handle(S.S.Finish), Chetna or Esco Like lock Washer SS Finish Hinges, Chetna or Esco Like Door Magnet & Stopper,Ozone Like Aldrop,Esco or Europa Like Tower Bolt with 6 mm High Performance glass with PU Polish complete as per dwg & as directed. (Only wood will be supplied at free of cost in standard sections)

6 Nos.

152 C: Manglore Tiles For Roofing Proding & Fixing Manglore(Clay) Tiles For roofing having Size 200mm X 120mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete As per Drawing.- GROUND FLOOR

5683.40 Sqm

152.1 C: Manglore Tiles For Roofing Proding & Fixing Manglore(Clay) Tiles For roofing having Size 200mm X 120mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete As per Drawing.- FIRST FLOOR

635.16 Sqm

152.2 C: Manglore Tiles For Roofing Proding & Fixing Manglore(Clay) Tiles For roofing having Size 200mm X 120mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete As per Drawing.- SECOND FLOOR

67.69 Sqm

152.3 C: Manglore Tiles For Roofing Proding & Fixing Manglore(Clay) Tiles For roofing having Size 200mm X 120mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete As per Drawing.- THIRD FLOOR

51.66 Sqm

153 D: Manglore Tiles For Ridges Proding & Fixing Manglore(Clay) Tiles for ridges having Size 200mm X 100mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete- GROUND FLOOR

1053 RMT.

153.1 D: Manglore Tiles For Ridges Proding & Fixing Manglore(Clay) Tiles for ridges having Size 200mm X 100mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete - FIRST FLOOR

191.70 RMT.

153.2 D: Manglore Tiles For Ridges Proding & Fixing Manglore(Clay) Tiles for ridges having Size 200mm X 100mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete- SECOND FLOOR

48 RMT.

153.3 D: Manglore Tiles For Ridges Proding & Fixing Manglore(Clay) Tiles for ridges having Size 200mm X 100mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete- THIRD FLOOR

60 RMT.

154 F: Brick Tile Cladding Proding & Fixing Brick Tiles for wall Cladding having Size 230mm X 75mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete- GROUND FLOOR

2987.31 Sqm

154.1 F: Brick Tile Cladding Proding & Fixing Brick Tiles for wall Cladding having Size 230mm X 75mm at all levels in cement Morter 1:2 including Scaffolding Tools tackels Finishing the joints with neet Cement Slurry Cutting, Cleaning, Curing etc. complete- FIRST FLOOR

682.43 Sqm

155 F: Basalt Stone Cladding Proding & Fixing Black Basalt Stone Cladding at All Level in Cement Mortar 1:6 including Scaffolding Tools tackels racking the joints with Pointing with neet Cement Slurry Cutting, Dressing the stone acid wash Cleaning, Curing etc. complete- GROUND FLOOR

2628.29 Sqm

157 SRI Painting Providing & Applying on all rof tops one coat of exterior primer and two coats of acrylic (Ther Matek Heat Reflective) exterior grade aint with SRI>100 & minimum guarantee of reduction in roof surface temperture by 18 deg C (Akzonobel / Berger / Econova OR equivalent) including Safety Ladder, pulley system etc. complete at all levels including all taxes transportation- GROUND FLOOR

2921.40 Sqm

157.1 SRI Painting Providing & Applying on all rof tops one coat of exterior primer and two coats of acrylic (Ther Matek Heat Reflective) exterior grade aint with SRI>100 & minimum guarantee of reduction in roof surface temperture by 18 deg C (Akzonobel / Berger / Econova OR equivalent) including Safety Ladder, pulley system etc. complete at all levels including all taxes transportation- FIRST FLOOR

3104.82 Sqm

157.2 SRI Painting Providing & Applying on all rof tops one coat of exterior primer and two coats of acrylic (Ther Matek Heat Reflective) exterior grade aint with SRI>100 & minimum guarantee of reduction in roof surface temperture by 18 deg C (Akzonobel / Berger / Econova OR equivalent) including Safety Ladder, pulley system etc. complete at all levels including all taxes transportation- SECOND FLOOR

485.05 Sqm

157.3 SRI Painting Providing & Applying on all rof tops one coat of exterior primer and two coats of acrylic (Ther Matek Heat Reflective) exterior grade aint with SRI>100 & minimum guarantee of reduction in roof surface temperture by 18 deg C (Akzonobel / Berger / Econova OR equivalent) including Safety Ladder, pulley system etc. complete at all levels including all taxes transportation- THIRD FLOOR

4277.69 Sqm

159 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete

3230.01 Sqm

160 Providing and fixing 15 mm thick ecofriendly densified edge calcium silicate false ceiling (like aeroltie) of approved texture spintone / cosmos/ hexa or equivalent of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides)consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick (minimum ) sheet, spaced 1200 mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all Tsections shall be prepainted with polyester baked paint, for all heights,

3629 Sqm

as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)- GROUND FLOOR

160.1 Providing and fixing 15 mm thick ecofriendly densified edge calcium silicate false ceiling (like aeroltie) of approved texture spintone /cosmos/ hexa or equivalent of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides)consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/ cosmos /hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all Tsections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)FIRST FLOOR

3104.41 Sqm

160.2 Providing and fixing 15 mm thick ecofriendly densified edge calcium silicate false ceiling (like aeroltie) of approved texture spintone /cosmos/hexa or equivalent of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides)consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/ cosmos/ hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all Tsections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)- SECOND FLOOR

806.95 Sqm

160 A PLime, Fly ash Stabilized Soil SubBase Construction of Sub base using lime Fly ash admixture with granular soil, free from organic matter/ deleterious material or clayey silts and low plasticity clays having PI between 5 and 20 and liquid limit less than 25 and commercial dry lime, slaked at site or preslaked with CaO content not less than 50 per cent, Fly ash to conform to gradation as per clause 4.3 of IRC: 881984, lime + Fly ash content ranging between 10 to 30 per cent, the minimum unconfined compressive strength and CBR value after 28 days curing and 4 days soaking to be 7.5kg/sq, cm and 25 per cent respectively, all as specified in IRC: 881984.

4282.02 Cum


15 NOS


25 NOS


40 NOS


65 NOS

165 Cutting down trees including trunks and branches with girths above 270cm to 450cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.y, all as specified in IRC: 881984. (Tree cutting permission shall be obtained by the department)

100 NOS

166 Cutting down trees including trunks and branches with girths above 450cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any. (Tree cutting permission shall be obtained by the department)

292 NOS

167 Suppling & laying Rigid PVC conduit 25 mm Dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1

33500 RMT.


9520 RMT.


1700 RMT.

170 Providing and fixing UPVC SOIL / VENT / WASTE SWR pipe of required diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 4 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions, and jointing with rubberring and lubricants,on wall by means of clips or in ground including necessary excavation,laying,refilling trench,testing etc complete.- 75 mm dia

2267 Rmt

170.1 Providing and fixing UPVC SOIL / VENT / WASTE SWR pipe of required diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 4 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions, and jointing with rubberring and lubricants,on wall by means of clips or in ground including necessary excavation,laying,refilling trench,testing etc complete.- 75 mm dia- 110 mm dia

1575 Rmt

171 Providing and fixing stop cock of specified dia. including necessary sockets, union nut testing etc. complete.

551 Each

172 Providing and fixing fittings and accessories such as ball cock, over flow pipe with mosquito proof coupling, scour pipe with plug, manhole with cover and locking arrangement, connecting pipes and embedding intake and outflow pipes into the R.C.C.water reservoir.

44 Each

173 Providing and fixing stop cock of specified dia. including necessary sockets, union nut testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary efore use.) Conceal stop cock 20m.

145 Each

174 Providing and fixing in position 40 mm. heavy type alkathene pipe for drainage connections including cutting, boring holes in wood work or masonry if necessary, making connections of pipe to sink and giving test for no leakages, making good the damaged surface etc. complete.

1244 Rmt

175 CPVC PIPING Providing and fixing on walls/ ceiling/ floor 15mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.

1126 Rmt


1594 Rmt


572 Rmt

175.3 Providing and fixing on walls/ ceiling/ floor 32mm 480 Rmt

dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.


364 Rmt


50 Rmt

176 Providing and fixing in position unplasticized poly venyl-chloride (UPVC) ultra voilet rays stabilised 110 mm outer diameter rain water SWR pipe conforming to I.S. 4985 and I.S.13592,including necessary fittings, such as PVC grating, bends, PVC clamps, horse shoes at bottom, rubber ring and making connections water tight with solvent, cement including making holes in masonary concrete redoing the same in C.M. 1:3, curing, testing etc. complete.

817 Each

177 Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipal requirements etc. complete. complete.- 40mm dia

48 Each

178 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc complete.

236 Each

179 Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etccomplete.

232 Each

NS 180 NS Items Providing and fixing 1st class white glazed earthenware "Orissa type" W.C.Pan 600 x 400 mm size including 'P'or 'S'trap UPVC soil and vent pipe upto the outside face of the wall, 1:5:10 cement concrete bedding without flushing cistern and with metropole flush valve (DUAL FLUSH 4 AND 2 LPF) with 40mm size and necessary fittings (Jaquar/ Cera/ Johnson / Hindware or Equivalent). inlet pipe with stop tap, bracket for fixing the cistern, 32 mm dia. UPVC flush pipe with fitting and clamps, 20 mm dia. UPVC over flow pipe with mosquito proof coupling, chain and pulley, painting of the exposed pipe and cutting and making good walls and floor, testing etc. complete. including all taxes, for all leads and lifts, testing etc. complete.

27 Each

NS 181 Providing and fixing European type white glazed earthernware water closet with metropole flush valve (DUAL FLUSH 4 AND 2 LPF), water jet and fittings (Jaquar/ Cera/ Johnson / Hindware or Equivalent), UPVC seat and lid with chromium plated brass hinges including UPVC soil and vent pipe upto the outside face of the wall including 100 mm dia. UPVC plug bend, inlet pipe, stop tap etc. all fittings, cutting and making good to the walls and floor, testing etc. complete.

253 Each

NS 182 Providing and fixing white glazed earthenware Wash Hand Basin of 55 cm x 40 cm size including cold water pillar tap (LOW FLOW MAXIMUM 4 LPM @ 3 BAR ), brackets, rubber plugs, waste coupling and necessary pipe conections including UPVC waste pipe & connection to P-Trap upto the outside face of the wall, cutting and making good to the walls and floor, testing etc. complete. with cold water pillar tap. including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Jaquar/ Cera)

268 Each

NS 183 Providing and fixing Steel sink of size 600 mm x 450 mm x 250 mm (1 mm thick) UPVC waste pipe upto outside face of wall, or upto floor trap cold water chromium plated screw down sink cock (LOW FLOW MAXIMUM 4 LPM @ 3 BAR ), rubber plug and brass chain, making good the damaged surface, etc. complete.including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Nirali / Anupam / Futura)

93 Each

NS 184 Providing and fixing chromium plated wall mixer (LOW FLOW MAXIMUM 6 LPM @ 3 BAR ) cock of heavy duty without washer with chromium plated showers without telephonic arrangement including necessary supply pipes 15 mm dia. and fittings like socket union, nuts, bends, valves, reducers, including necessary drilling holes in walls, slabs etc and remaking good the demolished portion to restore the same in original condition neatly and cleaning the site after completion of work, testing etc.complete. including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Jaquar/ Cera)

173 Each

NS 185 Providing and fixing white glazed earthenware semi stall type urinals with pressmatic push valve ( Low flow - 1 LPF ) , UPVC flush pipe with fittings, including spreader and CP pipe , UPVC soil pipe, connection to floor trap and soil pipe connection upto outside face of wall, making good the damaged surface, testing etc. complete.ncluding all taxes, for all leads and lifts, testing etc. (Approved Makes: Jaquar/ Cera)

65 Each

NS 186 Providing and fixing Chromium Plated 2 Way BIB cock (LOW FLOW MAXIMUM 6 LPM @ 3 BAR ) with wall flange including necessary sockets/ union nut, including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Jaquar/ Cera)

292 Each

NS 187 Providing and fixing Jaquar make series Hand shower (health faucet) with 8millimetre diameter 1 Metre long flexible tube and wall hook including necessary sockets/ union nut ,including all taxes, for all leads and lifts, testing etc. complete.

253 Each

NS 188 Providing and fixing Chromium Plated BIB cock with wall flange (LOW FLOW MAXIMUM 6 LPM @ 3 BAR ) including necessary sockets/ union nut etc.including all taxes, for all leads and lifts, testing etc. (Approved Makes: Jaquar/ Cera)

274 Each

NS 189 Providing and fixing UPVC Floor trap (multi-type) of self cleansing design with water seal not less than 50 mm, 3 nos. of 40mm waste water connections, including cost of cutting and making good the walls and floors where required Including CP grating, including square C.P. brass grating with C.P. brass frame with anti-cockroach trap including fixing to the floor with cement mortar and colour grout etc.including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Supreme/ Prince/ Raksha)

439 Each

NS 190 C.P. brass grating with C.P. brass square frame including fixing to the floor with cement mortar and colour grout etc complete. 150 mm dia grating– Terrace / Balcony Rainwater grating.including all taxes, for all leads and lifts, testing etc. complete. (Approved Makes: Viking/ Syscraft/ Chilly)

192 Each

NS 191 C.P. brass P-trap with water seal not less than 50 mm including flange plate as per manufacturer's instructions.including all taxes, for all leads and lifts, testing etc. complete.32mm dia (Approved Makes: Syscraft / Viega)

273 Each

NS 191.1 C.P. brass P-trap with water seal not less than 50 mm including flange plate as per manufacturer's instructions.including all taxes, for all leads and lifts, testing etc. complete.40mm dia (Approved Makes: Syscraft / Viega)

93 Each

NS 192 Providing and fixing U-PVC pipes of SCH 80 with all UPVC fittings as per ASTM D-2846 such as Tee, Elbow, Coupler, Adapter etc also with brass threaded transition such as MABT, FABT, metal Tee, metal Elbow etc where connection with metal is to be made, joint to be made with UPVC solvent as per ASTM F 493 including fabricated pipe supports, GI brackets, clamps, U-clips etc., including cutting chases and making good the walls etc. (for cold water and flushing water supply).including all taxes, for all leads and lifts, testing etc. complete. 15mm pipe (Approved Makes: Ashirwad/ Raksha/ Astral/ Supreme)

101 Rmt

NS 192.1 Providing and fixing U-PVC pipes of SCH 80 with all UPVC fittings as per ASTM D-2846 such as Tee, Elbow, Coupler, Adapter etc also with brass threaded transition such as MABT, FABT, metal Tee, metal Elbow etc where connection with metal is to be made, joint to be made with UPVC solvent as per ASTM F 493 including fabricated pipe supports, GI brackets, clamps, U-clips etc., including cutting chases and making good the walls etc. (for cold water and flushing water supply).including all taxes, for all leads and lifts, testing etc. complete. 20mm pipe (Approved Makes: Ashirwad/ Raksha/ Astral/ Supreme)

681.17 Rmt


2588 Rmt


1542 Rmt


1681 Rmt


3888 Rmt

NS 192.6 Providing and fixing U-PVC pipes of SCH 80 with all UPVC fittings as per ASTM D-2846 such as Tee, Elbow, Coupler, Adapter etc also with brass threaded transition such as MABT, FABT, metal Tee, metal Elbow etc where connection with metal is to be made, joint to be made with UPVC solvent as per ASTM F 493 including fabricated pipe

1030 Rmt

supports, GI brackets, clamps, U-clips etc., including cutting chases and making good the walls etc. (for cold water and flushing water supply).including all taxes, for all leads and lifts, testing etc. complete. 65mm pipe (Approved Makes: Ashirwad/ Raksha/ Astral/ Supreme)

NS 193 Providing and fixing cast brass ball valves chrome plated ball inside and hard chrome plated ball PTFE (Teflon) seal and ring and chrome plated steel centre handle with female BSP threads as directed by the Engineer-in-Charge .including all taxes, for all leads and lifts, testing etc. complete. 20mm dia (Approved Makes: VB/ Lehry/ Zoloto)

369 Each

NS 193.1 Providing and fixing cast brass ball valves chrome plated ball inside and hard chrome plated ball PTFE (Teflon) seal and ring and chrome plated steel centre handle with female BSP threads as directed by the Engineer-in-Charge .including all taxes, for all leads and lifts, testing etc. complete. 25mm dia (Approved Makes: VB/ Lehry/ Zoloto)

287 Each


312 Each


127 Each


54 Each

NS 194 Providing and fixing SS 'Y' type strainer with watch glass and cleaning back-flush valve.including all taxes, for all leads and lifts, testing etc. complete. 1 1/4 inch (Approved Makes: Varie / Zoloto / Lehry)

20 Each

NS 194.1 Providing and fixing SS 'Y' type strainer with watch glass and cleaning back-flush valve.including all taxes, for all leads and lifts, testing etc. complete. 1 1/2 inch (Approved Makes: Varie / Zoloto / Lehry)

20 Each

NS 194.2 Providing and fixing SS 'Y' type strainer with watch glass and cleaning back-flush valve.including all taxes, for all leads and lifts, testing etc. complete. 2 inch (Approved Makes: Varie / Zoloto / Lehry)

7 Each

NS 194.3 Providing and fixing SS 'Y' type strainer with watch glass and cleaning back-flush valve.including all taxes, for all leads and lifts, testing etc. complete. 2 1/2 inch (Approved Makes: Varie / Zoloto / Lehry)

1 Each

NS 195 Providing & fixing gun metal horizontal wafer type non return valve conforming to IS 778 and tested to a pressure not less than 15 Kg/Sq.cm, Including rubber gasket, flanges, union, nuts, bolts & washers complete as required.including all taxes, for all leads and lifts, testing etc. complete. 1/2 inch (Approved Makes: VB/ Lehry/ Zoloto)

290 Each

196 External Plumbing Works Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means(i - lift upto 1.5m)

1200 Cum

196.1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means (1.5 to 3m)

2500 Cum

197 Providing & constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover. ?450mm X 900mm

342 Each

198 Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stoneware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover.

2 Each

199 Providing and fixing 15 cm x 10 cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including symet grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with R.C.C. lid and Symet grating for the gully trap, testing etc. complete.

100 Each


400 Rmt


2000 Rmt


700 Rmt


200 Rmt


150 Rmt

205 Providing and fixing 45 cm wide mild steel ladder of 40mm x 6mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M15 cement concrete block 60cm x 30cm x 30cm & painting the ladder complete.(Anti Corossive Paint

850 Rmt

NS 206 NS Item Installation of Rain Water Percolation pits - 2000 mm X 2000mm up to 2000 mm deep, bottom 500 mm filled with boulders 10 - 20 mm size, middle 500 mm filled with gravels 5 - 10 mm size, and top 500 mm filled with coarse sand 1.5 - 2 mm size, in between which one no. UPVC 200 mm dia (6.0 kg/cm2) perforated pipe with 8 mm dia perforations protected by a cowl on upper end upto aquifer level inserted. The top 500 mm shall be left open, with RCC slab and manhole cover.

10 Each

NS 207 Fixing water meter with direct reading dial in KL with all internal parts in gunmetal or brass, strainer, flanged distance piece for easy removal in future, 25 mm dia. Bourden type Municipal pressure gauge and isolation cock including necessary test certificate for the meter from Local Authorities (For Municipal Connection).25mm dia

5 Each

NS 207.1 Fixing water meter with direct reading dial in KL with all internal parts in gunmetal or brass, strainer, flanged distance piece for easy removal in future, 25 mm dia. Bourden type Municipal pressure gauge and isolation cock including necessary test certificate for the meter from Local Authorities (For Municipal Connection).32mm dia

5 Each


4 Each


6 Each

NS 208 Providing & Fixing butterfly valve (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required.65mm dia

17 Each

NS 208.1 Providing & Fixing butterfly valve (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required.80mm dia

18 Each

NS 209 Construction of grit and grease trap as per approved drawing of size 3m X 2m and 1.5m deep including excavation, backfilling, PCC, Brickwork, plasterning internally and externally, inspection chambers etc complete including all taxes, leads, lifts etc complete.

1 Each

NS 210 Constructing brick masonry chamber upto 1.5 m deep, with first class bricks in cement mortar 1:5 RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix , inside and outside plastering 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix neatly finished complete as per standard design including excavation refilling and disposal of surplus earth. Manhole cover and frame to be in RCC tested for heavy load class as per IS 1726.600 X 600 rainwater chamber with RCC perforate cover

310 Each

NS 210.1 Constructing brick masonry chamber upto 1.5 m deep, with first class bricks in cement mortar 1:5 RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix , inside and outside plastering 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix neatly finished

30 Each

complete as per standard design including excavation refilling and disposal of surplus earth. Manhole cover and frame to be in RCC tested for heavy load class as per IS 1726.600 X 600 storm chamber with RCC cover

NS 210.2 Constructing brick masonry chamber upto 1.5 m deep, with first class bricks in cement mortar 1:5 RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix , inside and outside plastering 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix neatly finished complete as per standard design including excavation refilling and disposal of surplus earth. Manhole cover and frame to be in RCC tested for heavy load class as per IS 1726.Inspection Chamber 900mm X 900mm with perforated cover (Internal Size)

25 Each

NS 210.3 Constructing brick masonry chamber upto 1.5 m deep, with first class bricks in cement mortar 1:5 RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix , inside and outside plastering 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix neatly finished complete as per standard design including excavation refilling and disposal of surplus earth. Manhole cover and frame to be in RCC tested for heavy load class as per IS 1726.0.90m X 0.90m dia manhole with RCC cover

57 Each

NS 210.4 Constructing brick masonry chamber upto 1.5 m deep, with first class bricks in cement mortar 1:5 RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix , inside and outside plastering 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix neatly finished complete as per standard design including excavation refilling and disposal of surplus earth. Manhole cover and frame to be in RCC tested for heavy load class as per IS 1726.1.2m X 1.2m dia manhole with RCC cover

23 Each

NS 211 Providing and fixing GI Puddle flange, both side flanged ends, epoxy painted, to be inserted in RCC Tank as per Consultants drawing, with required welding with reinforcement steel .including all taxes, for all leads and lifts, testing etc. complete.200mm

6 Each

NS 211.1 Providing and fixing GI Puddle flange, both side flanged ends, epoxy painted, to be inserted in RCC Tank as per Consultants drawing, with required welding with reinforcement steel .including all taxes, for all leads and lifts, testing etc. complete.150mm dia (threaded ends)

20 Each

NS 211.2 Providing and fixing GI Puddle flange, both side 80 Each

flanged ends, epoxy painted, to be inserted in RCC Tank as per Consultants drawing, with required welding with reinforcement steel .including all taxes, for all leads and lifts, testing etc. complete.100mm dia (threaded ends)


25 Each


15 Each


10 Each

NS 212 Providing and fixing Side Manhole 1200X900 MS.including all taxes, for all leads and lifts, testing etc.

15 Each


35 Each


60 Each

NS 215 Swimming Pool Providing and fixing Swimming Pool Ladders in S.S. 304 with non-slip treads.including all taxes, for all leads and lifts, testing etc.complete2 Steps

2 Each

NS 215.1 Providing and fixing Swimming Pool Ladders in S.S. 304 with non-slip treads.including all taxes, for all leads and lifts, testing etc.complete3 Steps.

2 Each

NS 216 Providing and fixing Swimming pool cleaning kit comprising of:including all taxes, for all leads and lifts, testing etc. complete a) Anodized Aluminium Suction Sweeper (1No),b) 38mm dia Suction Hose (30m),c) Al. Telescopic Handle, 8' to 16' long (1No),d) Deep Bag Net (1No),e) Curved Nylon Brush, 18" long (1No),f) Test Kit for Chlorine & pH (1No).f) Test Kit for Chlorine & pH (1No).

1 Set

NS 217 Providing and fixing PVC (UV stabilized) grating 300mm wide of approved colour for swimming pool deck overflow channel.including all taxes, for all leads and lifts, testing etc.

84 Rmt

NS 218 Providing and fixing S/L u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. complete for re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm2.63mm dia

108 Rmt

NS 218.1 Providing and fixing S/L u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. complete for re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm275mm dia

48 Rmt

NS 218.2 Providing and fixing S/L u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. complete for re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm290mm dia

36 Rmt

NS 218.3 Providing and fixing S/L u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. completefor re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm2110mm dia

710 Rmt

NS 218.4 Providing and fixing laying u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. completefor re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm2140mm dia

24 Rmt

NS 218.5 Providing and fixing laying u-PVC pipes with heavy duty fittings.including all taxes, for all leads and lifts, testing etc. completefor re-circulatory plumbing Make - Prince / Supreme, 10 Kg/cm2 160mm dia

80 Rmt

NS 219 Providing and fixing laying Heavy Duty Valves.including all taxes, for all leads and lifts, testing etc. complete2.5" dia Ball Valves, Make - Prince

7 No.

NS 219.1 Providing and fixing laying Heavy Duty Valves.including all taxes, for all leads and lifts, testing etc. complete3" dia Ball Valves, Make - Prince

3 No.

NS 219.2 Providing and fixing Heavy Duty Valves.including all taxes, for all leads and lifts, testing etc. complete6" dia Butterfly Valves, Make - Aqvastar

1 No.

NS 219.3 Providing and fixing Heavy Duty Valves.including all taxes, for all leads and lifts, testing etc. complete2.5" dia Non Return Valves, Make - Aqvastar

3 No.

NS 219.4 Providing and fixing Heavy Duty Valves.including all taxes, for all leads and lifts, testing etc. complete3" dia Foot Valves, Make - Jain

2 No.

220 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Mechanical Means.

18737.09 Cum

221 Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. By Mechanical Means.

4015.09 Cum

222 Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed. By mechanical means

4015.09 Cum

223 Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.

1873.71 Cum

224 Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed.

3747.42 Cum

225 Transportation of materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 2000m. inclusive, from the site of excavation to the site of deposition as directed.

13115.96 Cum

226 Lime, Fly ash Stabilized Soil SubBase Construction of Sub base using lime Fly ash admixture with granular soil, free from organic matter/ deleterious material or clayey silts and low plasticity clays having PI between 5 and 20 and liquid limit less than 25 and commercial dry lime, slaked at site or preslaked with CaO content not less than 50 per cent, Fly ash to conform to gradation as per clause 4.3 of IRC: 881984, lime + Fly ash content ranging between 10 to 30 per cent, the minimum unconfined compressive strength and CBR value after 28 days curing and 4 days soaking to be 7.5kg/sq, cm and 25 per cent respectively, all as specified in IRC: 881984.

10992.97 Cum

227 Construction of granular subbase by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 By Mix in Place Method and Grading II Material

5353.46 Cum

228 Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

2007.55 Cum

229 Construction of dry lean cement concrete Sub base over a prepared subgrade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer incharge , compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete.

2676.73 Cum

230 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS 383, using fine & coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge

8030.18 Cum

231 Providing and fixing in position mild steel 32 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia.

24225 NOS.

232 Providing and fixing in position HYSD tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C & wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of HYSD chairs with proper alignment etc. complete.

9988 NOS.

233 Providing and laying 125 micron Low Density Polyethylene ( LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

110527.95 Sqm

234 Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

8880 RMT

235 Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS: 5212 ¬ 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor & allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction & longitudinal joints (15 mm. deep x 8 mm.wide)

8880 RMT


50 NO.


15 NO.

238 Providing and fixing of retro¬ reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square meter made out of 4mm aluminum composite material ( ACM) sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67¬2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint & supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class C ( Type XI Micro prismatic grade sheeting) sheeting shall have 10 years written warranty from the manufacturer & authorised distributor/convertor issued for field performance including the screen printed areas and cut¬out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

15 NO.

239 Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 mm dia made out of 1.5mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro¬prismatic grade sheeting¬HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67¬2012 Table No8.3 supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro¬prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer & authorised distributor/convertor issued for field performance including the screen printed areas and cut¬out sheeting and cut¬out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

10 NO.

240 Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 mm dia made out of 1.5mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67¬2012 Table No 8.3 supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro¬prismatic grade sheeting¬HIP) shall have 10 years written warranty from the manufacturer & authorised distributor/convertor issued for field performance including the screen printed areas and cut¬out sheeting and cut¬out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

10 NO.

241 Supplying & Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10¬97 ? DO III Dt 11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/¬ 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/¬ 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/¬ 2 mm and height not less than 30+/¬ 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer?s recommendation and complete as directed by the engineer.

25 NO.

242 Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface¬ Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.

1348.56 Sqm

243 Providing and casting in situ or precast tapering R.C.C. M¬20 Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M¬10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

5993.58 RMT

244 Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete.

99.92 Sqm

245 Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

11984 Sqm

246 Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Sieve Analysis

72 Nos


72 Nos


72 Nos


72 Nos


72 Nos


72 Nos


72 Nos


72 Nos


72 Nos


72 Nos


72 Nos


72 Nos


72 Nos


510 Nos


510 Nos


510 Nos


253 Nos


253 Nos


253 Nos


253 Nos


253 Nos


253 Nos


253 Nos

249 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Compressive Strength OF C.C. Cube(Set of 3 cubes).

1200 Nos

249.1 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Concrete Mix Design (With all Tests on basic materials)*

150 Nos

249.2 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Flexural strength of Beam.

150 Nos

249.3 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Concrete mix design by Accelerated curing method.

200 Nos

249.5 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.(Boiling water method)

20 Nos

249.6 Carrying out testf concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Taking of core samples in concrete pavement. (Excluding Dead Journey Charges)

150 Nos


270 Nos

251 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.a. Upto 16mm dia.i) Weight / metre ii) Ultimate tensile stess

200 Nos

251.1 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.b. Above 16mm dia.iii) Yield stress iv) Elongation Test

200 Nos

251.2 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.b. Above 16mm diaNitrol Solution Test

100 Nos

252 Carrying out various test of Bricks transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.i) Water absorption ii) Compressive Strength iii) Efflorence Test

125 per set

253 Carrying out various test of Ceramic tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Water Absorption, Modules of Rapture (Set of 6 Tiles)

36 Nos

254 Carrying out various test of Mangalore tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Water Absorption (Set of 6 Tiles), Flexural test (Set of 6 tiles)

36 Nos

254.1 Carrying out various test of Mangalore tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Permeability.

36 Nos

255 Carrying out various test of Brick tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Water Absorption (Set of 6 Tiles), Flexural test (Set of 6Tiles)

10 Nos

255.1 Carrying out various test of Brick tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Permeability.

10 Nos

256 Carrying out various test of Mortarprepared on site (set of 3 cubes) in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Compressive Strength , Water Absorption, (Set of 8 Blocks), Flexural Test ( Set of 8 Blocks). Resistance to wear.( Set of 8 Blocks)

15 Nos

257 Carrying out various test of Mortarprepared on site (set of 3 cubes) in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Compressive Strength.( Set of 3 Cubes)

25 Nos

258 Carrying out various test of Paving Block tile transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Crushing Value/Compressive Strength Water Absorption& Specific Gravity,

50 Nos

259 Carrying out various test ofwater available from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.PH Value, Sulphate & Chloride Content

10 Nos

260 Carrying out various test of wood from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Density, Moisture Content

10 Nos

261 Carrying out various test of flush door from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Knife Test, Adhesion Test, End Immersion Test

12 Nos

262 Carrying out various test of Aluminium Section from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Thickness, Mass Per Running meter

10 Nos

262.1 Carrying out various test of Aluminium Section from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Test on Powder Coating

3 Nos

263 Carrying out various test of PVC Pipe from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Weight per running meter, Diameter of pipe & wall thickness of pipe

10 Nos

263.1 Carrying out various test of PVC Pipe from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Weight of Zinc coating per sq. m.

5 Nos

264 Carrying out various test of G.I.Pipe from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Weight per running meter, Diameter of pipe & wall thickness of pipe

50 Nos


50 Nos


50 Nos


50 Nos


50 Nos


50 Nos

266 Carrying out various Non Destructive test on site etc. complete.Rebound Hammer Test.

300 Nos

266.1 Carrying out various Non Destructive test on site etc. complete.Ultrasonic Pulse Velocity

200 Nos

267 Lab Testing For Road Works Carrying out soil/ murum including transportation to laboratory, and obtaing the test result form local / district/ regional laboratory etc. complete.Sieve Analysis

28 Nos


28 Nos


28 Nos


28 Nos


28 Nos


28 Nos


28 Nos


28 Nos


28 Nos


28 Nos


28 Nos


28 Nos


28 Nos


2 Nos


2 Nos


2 Nos


3 Nos


3 Nos


3 Nos


3 Nos


3 Nos


3 Nos


3 Nos

270.1 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Compressive Strength OF C.C. Cube(Set of 3 cubes).

50 Nos

270.2 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Concrete Mix Design (With all Tests on basic materials)*

10 Nos

270.3 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Flexural strength of Beam.

10 Nos

270.4 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Concrete mix design by Accelerated curing method.

10 Nos

270.5 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.(Boiling water method)

10 Nos

270.6 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Taking of core samples in concrete pavement. (Excluding Dead Journey Charges)

10 Nos

270.7 Carrying out test for concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.GSB Mix Design

10 Nos


3 Nos

272 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.i) Upto 16mm dia. Weight / metreii) Upto 16mm dia.Ultimate tensile stess

10 Nos

272.1 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.iv) Above 16mm dia.Elongation Test Yield stress

10 Nos

272.2 Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.Nitrol Solution Test

10 Nos


50 Nos


50 Nos


50 Nos


50 Nos


50 Nos

274 Carrying out Road Sign board test on site etc. complete.Retro Reflective Test

2 Nos

275 Carrying out Rough Index / Road Unevenness Test test on site etc. complete. Road Surface Single Lane.(3.70 to 5.50 m)

1 km

275.1 Carrying out Rough Index / Road Unevenness Test test on site etc. complete.Road Surface 1.5 Lane to Two Lane.(5.50 to 7.00 m)

1 km

275.2 Carrying out Rough Index / Road Unevenness Test test on site etc. complete.Each Additional Lane.

1 km

275.3 Carrying out Rough Index / Road Unevenness Test test on site etc. complete.Dead Journey Charges

1 km

276 Excavation for foundation in soft strata which does not required blasting Upto 1.5 Mtr. depth includig removing the excavated material upto a distance of 50 Mts.(i.e. About 164') beyond the building area and lift. Excavation for foundation in earth, soils of all type sand gravel and soft murum including removing the excavated material up to a distance of 50 mtr, beyond the building area and stacking or spreading as directed preparing the bed for foundation and necessary back filling ramming and watering including shoring and strutting as necessary complete, 1. Lift up to 1.5mtr.

2250.00 Cum

276.1 Filling fresh garden soil/ silt & manure in excavated area including lead upto a distance of 50 Mtrs. (1/10 of unskilled labour)

1800.00 Cum

276.2 Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting required plant species, lawn grass as directed etc.complete. (1/10 of Semiskilled labour).

840.38 Cum

276.3 Mazdoor Unskilled light/Female for garden work 1000.00 P/Day276.4 Semiskilled Labour (Mali) for garden work. 500.00 P/Day277 GARDEN SOIL:- Supplying on site garden soil well

sieved 90% to pass through I.S.sieve of 10mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The colour of the soil generally be red. the soil will be measured by measuring box.(Farma) Item includes royalty charges, octroi, corporation Tax Transporting, loading-unloading etc.

2478.00 Cum

277.1 FARM YARD MANURE:- Supplying on site well decayed, well dried, well powdered, wihtout clods and free from stones, dried grass and other rubbish material. The colour of the manure generally be black. The manure will be measured by measuring box. (Farma) Item includes Transporting,loading-unloading etc

1050.00 Cum

278 PLANTS - Roses common / budded varieties 1500.00 Each278.1 PLANTS - Mogra / Creeper / Climbers 1200.00 Each278.2 PLANTS - Canna Rhyzome common varieties. 4500.00 Each278.3 PLANTS - Seedings of Seasonals.(open Pollinated.)

(for 100 nos.)2000.00 Nos

278.5 PLANTS - Rooted / Unrooted cutting for edging /border. (For 100 Nos.)

1200.00 Nos

278.6 PLANTS - Lawn grass Cynadon on Paspallum. 900.00 Kg.279 PLANTS - Saplings of flowering/shady trees,

Gulmohar, Raintree, Peltophorum etc. In polybag(ht.min.upto 1 mtr.)

500.00 Each

279.1 Trees Saplings of flowering/shady trees, Gulmohar, Raintree, Peltophorum etc. In polybag(ht.upto 2-2.5mtr.)- Aegle marmelos

75.00 Each

279.2 Albizia lebbek 75.00 Each279.3 Alstonia scholaris 75.00 Each279.4 Bombax ceiba 75.00 Each279.5 Butea monosperma 75.00 Each279.6 Calophyllum inophyllum 75.00 Each279.7 Cedrela toona 75.00 Each279.8 Cordia sebestena 75.00 Each279.9 Crateava nuruvala 75.00 Each

279.10 Dalbergia lanceloria Paniculata 75.00 Each279.11 Dalbergia sisoo 75.00 Each279.12 Dillenia indica 75.00 Each279.13 Dillenia indica 75.00 Each279.14 Diospyros melanoxylon 75.00 Each279.15 Erythrina indica Variegara 75.00 Each279.16 Ficus benjamina 75.00 Each279.17 Ficus Religiosa 75.00 Each279.18 Ficus retusa 75.00 Each279.19 Gmelina arorea 75.00 Each279.20 Holoptelea integrifolia 75.00 Each279.21 Madhuka longifolia 75.00 Each279.22 Manikara hexendra 75.00 Each279.23 Minusops elengi 75.00 Each279.24 Morus indica 75.00 Each279.25 Phyllanthus acidus 75.00 Each279.26 Phyllanthus emblica 75.00 Each279.27 Pongamia pinnata 75.00 Each279.28 Pterospermum acerifolium 75.00 Each279.29 Schleichera oleosa 75.00 Each279.30 Spathodia campanulata 75.00 Each279.31 Syzygium cumini 75.00 Each279.32 Syzygium jambo 75.00 Each279.33 Tabebuia rosea 75.00 Each279.34 Terminalia Arjuna 75.00 Each279.35 Terminalia crenulata 75.00 Each279.36 Terminalia mantaley 75.00 Each279.37 Wrightia tinctoria 75.00 Each279.38 Ornamental trees

Bauhinea purpurea/ Alba75.00 Each

279.39 Cassia fistula 75.00 Each279.40 Cassia javanica 75.00 Each279.41 Ficus elastica 75.00 Each279.42 Ficus lyrata 75.00 Each

279.43 Ficus maccalendii aureum 75.00 Each279.44 Filicium decipens 75.00 Each279.45 Jacaranda mimosifolia 75.00 Each279.46 Lagerstromia flosregine 75.00 Each279.47 Malaleuca bracteata 75.00 Each279.48 Mesua ferrea 75.00 Each279.49 Michelia champaka 75.00 Each279.50 Plumeria Alba 75.00 Each279.51 Plumeria Rubra 75.00 Each279.52 Palms Areca catechu 75.00 Each

279.53 Chamaerops humilis 75.00 Each279.54 Chrysalidocarpus lutescens 75.00 Each279.55 Cycus circinalis 75.00 Each279.56 Cycus revoluta 75.00 Each279.57 Licuala grandis 75.00 Each279.58 Phoenix sylvestris 75.00 Each279.59 Ptychosperma macarthuri 75.00 Each279.60 Rhapis excelsa 75.00 Each279.61 Washingtonia robusta 75.00 Each279.62 Wodyetia bifureata 75.00 Each

279 Shrubs Sapling of small & medium ornamental flowering plants, Thuja, Cupresus, Ornamental ficus,Mussanda etc.- Acalypha godseffiana "Compacta"

350.00 Each

279.1 Acalypha nispaniolae 350.00 Each279.2 Acalypha wilkesiana rosea 350.00 Each279.3 Agapanthus africanus 350.00 Each279.4 Agave attenuata 350.00 Each279.5 Agave augustifolia variegated 350.00 Each279.6 Allamanda nerifolia dwarf 350.00 Each279.7 Allocasia macrorhizza 350.00 Each279.8 Alpinea zurumbet variegata 350.00 Each279.9 Angelonia augustifolia 350.00 Each

279.10 Barleria lawii 350.00 Each279.11 Barleria montana 350.00 Each279.12 Bougainvillea torchglow 350.00 Each279.13 Calliandra portoricensis hybrid 350.00 Each279.14 Coleus blumei 350.00 Each279.15 Crossandra undulaefolia soundarya 350.00 Each279.16 Duranta repens 350.00 Each279.17 Eranthemum laxiflorum 350.00 Each279.18 Euphorbia leucocephala 350.00 Each279.19 Euphorbia milli hybrid 'red' 350.00 Each279.20 Furcraea gigantia 350.00 Each279.21 Galphimin glauca 350.00 Each279.22 Hamelia patens 350.00 Each279.23 Hedychium coronarium 350.00 Each279.24 Hibiscus rosa-sinensis 350.00 Each279.25 Ixora singaporensis 350.00 Each279.26 Jasminum sambac 350.00 Each279.27 Murraya exotica 350.00 Each279.28 Pedilanthus tithymaloides variegated 350.00 Each279.29 Pentas lanceolata 'blue' / 'red' 350.00 Each279.30 Phyllanthus nivosus 'Compacta' 350.00 Each279.31 Pleomele reflexa 350.00 Each

279.32 Plumbago auriculata 'blue' 350.00 Each279.33 Pseudeanthemum reticulatum 350.00 Each279.34 Rosa summer show/Rosa hakun 350.00 Each279.35 Sansevieria guineensis 'Variegata' 350.00 Each279.36 Schefflera arbonicola 'variegated' 350.00 Each279.37 Tabernaemontana coronaria variegated dwarf 350.00 Each279.38 Tabernaemontana coronaria double 350.00 Each279.39 Tabernaemontana coronaria Mini 350.00 Each279.40 Thunbergia erecta 350.00 Each279.41 Bamboo Bamboo

variegated dwarf 350.00 Each

279.42 Bambusa ventricosa 350.00 Each279.43 Bambusa vulgaris 350.00 Each279.44 Tall Shrubs Bauhinia

tomentosa350.00 Each

279.45 Caesalpinea pulcherima 350.00 Each279.46 Cassia Biflora 350.00 Each279.47 Gardenia jasminoid 350.00 Each279.48 Holarrhena antidysenterica 350.00 Each279.49 Jatropha pandurifolia 350.00 Each279.50 Lagerstroemia indica 350.00 Each279.51 Lantana camara (yellow) 350.00 Each279.52 Manihot esculenta 'Variegata' 350.00 Each279.53 Mussaenda erythrophylla 350.00 Each279.54 Nerium oleander Alba / rosea 350.00 Each279.55 Plumeria pudica 350.00 Each279.56 Tecomaria capensis 350.00 Each279.57 Vitex negundo 350.00 Each279.58 Yucca silver / variegated / dwarf 350.00 Each

280 Common Ornamental shrubs for Shrubbery. (1'ft.grown in poly bags)

5000.00 Each

281 Ground Covers Ground Cover e.g. Lantana, Syngonium, Wedelia, Ipomoea Pothas, Chlorophytum. Common Ferns etc.- Agave americana variegated

1350.00 Each

281.1 Alteranthera variegated /red species variety 1350.00 Each281.2 Alternanthera 'Snow top' 1350.00 Each281.3 Aptenia cordifolia (red) 1350.00 Each281.4 Asperagus Springeri species 1350.00 Each281.5 Callisia repens 1350.00 Each281.6 Chlorophytum laxum 1350.00 Each281.7 Cuphea hyssopifolia 1350.00 Each281.8 Cyperus alternifolius 1350.00 Each281.9 Dianella tasmanica variegated 1350.00 Each

281.10 Senecio cineraria silver dust 1350.00 Each281.11 Lantana sellowiana white 1350.00 Each281.12 Nephrolepis exaltata 'childsii' / double species 1350.00 Each281.13 Rhoeo tricolour 1350.00 Each281.14 Rusellia juncea 1350.00 Each281.15 Salvia farinacea 1350.00 Each281.16 Setcreasea purpurea 1350.00 Each281.17 Verbina mix colour 1350.00 Each281.18 Vinca red / rosea 1350.00 Each281.19 Tabernaemontana coronaria 'Mini' 1350.00 Each281.20 Wedelia trilobata 1350.00 Each281.21 Zephranthus candida 1350.00 Each

281.22 Gardenia jasminoid dwarf 1350.00 Each281.23 Hymanocalis sp 1350.00 Each281.24 Climbers and Creepers

Thunbergia laurifolia Blue25.00 Each

281.25 Allamanda cathartica 25.00 Each281.26 Bignomia purpurea 25.00 Each281.27 Bouganinvillea peruviana 25.00 Each281.28 Clematis gouriana 25.00 Each281.29 Cryptostegia grandiflora 25.00 Each281.30 Ficus pumila variegated 25.00 Each281.31 Jacquemontia violacea 25.00 Each281.32 Jasminum auriculatum 25.00 Each281.33 Jasminum pubescence 25.00 Each281.34 Petrea volubilis 25.00 Each281.35 Pseudocalymma alliaceum 25.00 Each281.36 Pyrostegia venusta 25.00 Each281.37 Grasses

Antropogan citratus1350.00 Each

281.38 Cortaderia selloana 1350.00 Each281.39 Opheopogan jaburan vittatus variegated 1350.00 Each281.40 Opheopogan japonicus 'Nanus' 1350.00 Each281.41 Paspalum notatum 1350.00 Each281.42 Pennisetum foxtrot 1350.00 Each281.43 Pogonetherum paniceum 1350.00 Each281.44 Zoyasia japonica matrella 1350.00 Each281.45 Zoysia tenuifolia 1350.00 Each281.46 Areca Palm (4-5 feet) 500.00 Each281.47 Ready to fix Lawn turf in slabs or rolls 6025.13 Sqm

282 COMPLETED HORTICULTURE ITEMS Praparing Lawn(30 cm.depth):-Excavating the ground to a required depth of 30cms,removing & conveying unwanted stuff to a required distances as directed.filling fresh garden soil/slit & manure in excavated area in 3:1 proportion to a height of 30cms.Mixing garden soil and manure thoroughly well,levelling,watering on previous night.Planting required variety of lawn grass as directed and maintaining till well established by watering,weeding,clipping,rolling,complete.

445.50 Sqm

283 Preparing Lawn (20 cm) depth:-Excavating the ground to a required depth of 20cms,removing &conveying unwanted stuff to a required distance as directed.Filling fresh garden soil/slit &manure in excavated area in 3:1 proportion to a height of 20cms.Mixing garden soil and manure thoroughly well, levelling,watering on previous night.Planting reqiured variety of lawn grass as directed and maintaing till well established by watering,weeding,clipping,rolling,etc.complete.

271.69 Sqm

284 Preparing instant Lawn:-Excavating the ground to a required depth of 20cms,removing &conveying unwanted stuff to a required distance as directed.Filling fresh garden soil/slit7 manure in excavated area in 3:1 proportion to a height of 20cms.Mixing garden soil and manure thoroughly well,levelling,watering on previous night.Planting required variety of lawn grass as directed and maintaining till well established by watering,weeding,clipping,rolling,etc.complete.

6025.13 Sqm

285 Preparing Edging or Border:- Excavating the ground to a required depth of 20 cms.,in the required area.,removing and conveying unwanted stuff,rubbish to the required distance as directed.Filling the excavated part with fresh soil and manure in 3:1 proportion to a required height to 20 cms.Mixing,levelling,watering the same.Planting rooted edging/border plants at distance of 20 cms.apart watering,stiring of soil replacing casualties,pruning if necessary etc.complete.

360.00 Sqm

286 Planting clipped Hedge:- Excavating the ground to a required depth of 30 cmt, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and Planting hedge plant of required species in two rows. Distance between two rows & between two cutting will be 25cms. Maintaining till well established by watering, weeding, stirring the soil and clipping if necessary etc.complete.

210.00 Sqm

287 Preparing flower Bed:- Excavating the ground to the required depth of 30cms, Removing and conveying unwanted stuff to a required distance as directed, Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30 cms Mixing garden soil and manure thoroughly well,levelling,watering, on previous night. Planting seedlings of required annuals 25cms. apart Maintaining till well established by watering, weeding, stirring replacing of casualties etc,complete.

180.00 Sqm

288 Preparing Canna Bed:- Excavating the ground to the required depth of 30cms. Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a required height of 30cms. Mixing garden soil & manure thoroughly well, levelling, watering on previous night. Planating well developed Canna rhyzomes 40 cms apart. Maintaing till well established by watering weeding,stirring, replacing, casualties etc.complete.

750.00 Sqm

289 Preparing shrubbery:- Excavating the ground to required depth of 30 cms, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & Manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil & manure thoroughly well levelling, watering on previous night. Planting well developed shrubs plant 0.5 Mtrs. apart as directed and maintaining till well established by watering, weeding. stirring, replacing casualties etc. complete.

7496.40 Sqm

290 Rose Plant: - Excavating pit with size 0.3 X 0.3 X 0.3 m. Removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and manure in 3:1 proportion to a height of 0.3m.mixing the soil & manure thoroughly well, levelling watering on previous night. Planting 40 to 50 cms. height healthy plant of required rose variety. Maintaining till well established by watering, weeding, stirring, prunning, replacing the casualties etc.complete.

300.00 No.

291 Mogra Plant / Creepers/Climbers :- Excavating pit with size 0.3m X 0.3m X 0.3m, removing and conveying unwanted stuff to a required distance as directied. Filling the poit with approved excavated material upto a height of 0.15 mtr and remaining height of 0.15 mtr with fresh garden soil and manure in 3:1 proportion, mixing soil and manure thoroughly well levelling watering on previous night. Planting one or two year old healthy plant as per specifications Maintaining till well established by watering weeding prunning, stirring, replacing casualties etc complete.

240.00 No.

292 Planting large flowering/shady trees (Ht.1 mtr.) Digging pit with size 0.9m x 0.9m x 0.9m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m and remaining height of 0.60m with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure throughly well, levelling as directed watering previous night, planting one to two year old minimum 1 Mtr height, healthy trees sapling as per specifications, Maintaining till well established by watering weeding stirring of soil replacing of casualties etc complete.

500 No.

293 Planting large flowering/shady trees (Ht.2 mtr.) Digging pit with size 0.9m x 0.9m x 0.9m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m and remaining height of 0.60m with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure throughly well, levelling as directed watering previous night, planting two to three year old minimum 2.0 Mtr height, healthy trees sapling as per specifications, Maintaining till well established by watering weeding stirring of soil replacing of casualties etc complete.

4650.00 No.

294 Planting small and medium size ornamental/flowering plant:- digging pit with size 0.6mX0.6mX0.6m,removing and conveying unwanted stuff to a required distance as directed.Filling the pit with fresh garden soil & Farm Yard Manure upto a height of 0.60m.in 3:1 proportion.Mixing soil and Manure thoroughly well,levelling,watering on previous night.Planting one to two year old healthy plant saplings as per specification.Maintaining till well established by watering,stirring,of soil and manure,replacing casualties,etc.complete.

5250.00 No.

295 Preparing ground covers:-Excavating the ground to a required depth of 20cms.Removing &conveying unwanted stuff,rubbish to the required distance as directed.Filling the excavated area with fresh garden soil & F.Y.Manure in 3:1 proportion to a height of 20 cms.Mixing,levelling,watering the same previous night.Planting suitable ground covers as directed in staggering pattern,distance between two rows 25 cms,watering & maintaing till well established

4315.92 Sqm

296 IRRIGATION Providing,Installing,Testing and Commissioning of Landscape Irrigation System including following items1) VFD Pumping system including pumps,VFD Control panel,pressure tanks,pressure switches,necessary valves,cabling,piping and fixrures2) Filtration system including sand and disk filters of appropriate capacity, auto backwashing system, common headers, necessary valves, pressure relief valves, piping and fittings.3) Control valves likebutterfly valves, ball valves, air valves, flush valves, isolating valvesetc of appropriate size with necessary fittings.4) Piping with HDPE, PVC, UPVC pipes of 110mm, 90mm, 75mm, 63mm, 40mm and 6 kg rating with necessary fittings and accessories.5) Popup sprinklers of various diameters 14 to 16 m, 10to12 m, 5 to 7 m, 2 to 5 m, both gear driven and spray type along with swing joints, shrub riser assemblies and necessary fittings and accessories.6) Drip system with inline poly tube, plain poly tube and external drippers, microsprinklers, spray jets with stake/stands, subsurface inline tubing, extension tubes, tube holding stakes and necessary fittings and accessories.7) Automation system with controllers, solenoid valves, necessary cabling, outdoor enclosures,eartings,decoders,casing pipes of pvc and hdpe,with necessary fittings and accessories.8) Valve boxes, valve chambersfor enclosing valves of appropriate size with necessary base and fixtures.9) Quick coupling garden outlets with necessary fittings and accessories.10) Water meter of appropriate size with necessary

17286 Sqm

fittings and accessories.11) Civil works like digging of trenches in all strata,foundation for filters, pumps, road crossings and sleeves etc with necessary materials.

This Addendum is Part of Tender Documents.

Out Ward No. 5017/Dt. 28.09.2017

Sd/- Sd/- Sd/- Executive Engineer Superintending Engineer Chief Engineer Public Works Division No 2 Public Works Circle, Public Works Region Chandrapur Chandrapur Nagpur

pwd.maharashtra.etenders.in - Welcome to the e … · Web viewExcavation for foundation in Soft...

Documents

Transcript of pwd.maharashtra.etenders.in - Welcome to the e … · Web viewExcavation for foundation in Soft...