PVC Granulation line
Transcript of PVC Granulation line
L / D Ratio
up to 36:1
PVC Granulation lineGRANULEX
Max. Output
up to 3500 kg/hr
SALIENT FEATURES
> Patented MULTIDRIVE system for elimination of the torsion effort on the command shafts and far longer useful life of transmission system
> Parallel counter rotating technology to process wide range of formulations and very easy to operate
> Longer L/D ratio to enhance melt homogenization at much higher output levels using similar size extruder and motor ratings thus lower energy consumption
> Thermo control unit to maintain screw temperature to cater to wide range of applications and better processability
> Load cell for back pressure control on thrust bearings
> Multi-stage thrust bearings - threefold increase in dynamic load - increased power available for the screw
> Special coating on screw for long life
> Online measuring of energy consumption provided in touch screen panel
> The quick clamp die head assures fast cleaning to reduce down time and to process wide range of formulations
> Dry cutting unit with axial or lateral cut which is used for all kinds of PVC compounding
> Off set blades operate at low temperature to prevent adhesion
> Efficient cooling of granules by cooling unit which includes chilled cyclone for separation of the granules from conveying air and fumes, vibration of cooling tray and variable speed cooling fans
> Pipe fittings
> Wire & Cable
> Window and door profiles
> & Toys Footwear
> Medical tubings and blood bags
> Calendering & Flooring
> Automotive, Seals & Gasket
> WPC Profiles
> Films & Sheets
> Hoses & tubes
> Masterbatch
> Recycled plastics
www.rajoobausano.com
/Rajoobausano
Head Office :
Rajoo Avenue, Survey No. 210, Plot No.1, Industrial Area,
Veraval (Shapar), Rajkot - 360 024, Gujarat - India
Phone : +91-90990 88176
Fax : +91-2827-252700,
Email : [email protected]
Rajoo Bausano Extrusion Pvt. Ltd.
Multidrive System
Die Face Cutter
APPLICATIONS - PVC granules for
graphics@
rajoo.com
Cooling Unit