Pushbuttons and Pilot Lights - Tier1 Automation Automation - Products and Solutions PUSHBUTTONS Data...

1-800-ASK-4WEG

www.weg.net

Data is subject to change without notice.B-196

Pushbuttons and Pilot Lights

PU

SH

BU

TTON

S

PDF Compressor Pro

www.tier1automation.com

http://www.pdfcompressor.org/buy.html

WEG Automation - Products and Solutions

www.weg.net

PU

SH

BU

TTO

NS

B-197

General Description ..............................................................................................................................B-198

Product Line Overview ......................................................................................................................... B-199

Industrial Pushbuttons & Pilot Lights 22mm - CSW Series

Product Selection ........................................................................................................................ B-201

Dimension ........................................................................................................................................... B-208

Industrial Pushbuttons & Pilot Lights 30mm - CSW30 Series


Dimension ................................................................................................................................... B-217

Hazardous Pushbuttons & Pilot Lights 30mm - CSW30H Series


Dimension ........................................................................................................................................... B-227

Pushbutton Stations


Dimension ........................................................................................................................................... B-233

Pushbuttons and Pilot Lights

Data is subject to change without notice.

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


WEG has used its leading-edge technology & development capability to design the CSW series of pushbuttons,

pilot lights, selector switches and accessories. These user friendly and durable Ø22mm pilot devices are used

in many industrial applications and environments.

Besides the brightness, the BIDL blocks have many other valuable characteristics, such as:

Long life expectancy

Great performance on shock and vibration applications

Extremely low power consumption and thermal dissipation

High luminosity and color definition (independant of the lens)

Fast and easy assembling system

The Mounting of the contact blocks to the operator (pushbutton, selector switch or indicator) is done via a snap-

on flange which ensures a fast tight fit. This system also can be removed quickly, without tools. Each single

block can be mounted or removed individually: to assemble, just snap the components together and a common

screwdriver is all that is necessary for disassembly. The ergonomic design of the new locking ring allows hand

tightening, without the need for a screwdriver.

Contact blocks – safety and reliability

High efficiency self-cleaning contact blocks; Pure Silver Contacts (Ag100), ensures maximum reliability in every

condition even at low energy levels (5mA/12V). NC Contacts with “Positive Break” system, ensures circuit interruption.

Accessories

A complete line of accessories is available including legend plates, protection covers, lenses for pilot lights, solid

and engraved caps for flush pushbuttons.

Controls

Pushbuttons and Pilot Lights - CSW Series

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS

Data is subject to change without notice. B-199

Controls

Pushbuttons and Pilot Lights - CSW Series

Certifications

ULR

C US

Totally Insulated

IP66

Nº Description

1 Double Pushbutton

2 Protection Cover for Double Pushbutton

3 Illuminated Flush Pushbutton

4 Flush Pushbutton

5 Protection Cover for Flush Pushbutton

6 Selector Switch Knob

7 Selector Switch Lever

8 Illuminated Selector Switch

9 Key Switch

10 Pilot Light

11 Mushroom Pushbutton

12 Emergency-Stop Pushbutton - Twist Release

13 Emergency-Stop Pushbutton - Key Release

14 Plate Holder

15 Legend Plate

16 Double Contact Block

17 LED Block

18 Contact Block - NO or NC

19 Contact Block NCdb (delayed break)

20 Push-On / Push-Off Block

21 Contact Block NOem (early make)

22 Flange - 3 Positions

23 Flange - 5 Positions

24 IIluminated Extended Pushbutton

25 Illuninated Mushroom Pushbutton

26 Recessed Pushbutton

27 Protection Cover for BFI and BSI Pushbuttons

28 Plate Holder for Double Pushbutton

29 Emergency Pushbutton Protection

30 Emergency-Stop Pushbutton BESG - Twist Release

31 Emergency-Stop Pushbutton BESP - Pull Release

32 Emergency-Stop Pushbutton BESY - Key Release

30

31

32

NEMA4X

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls

Pushbuttons and Pilot Light - CSW Series

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Pushbuttons

FLUSH

BF0

BF1

BF2

BF3

BF4

BF5

CSW-B__ __Color (see Color Code)

Types

F - Flush

S - ExtendedC - Mushroom

D - Double

GA - Recessed

FI - Illuminated Flush

SI - Illuminated ExtendedCI - Illuminated Mushroom

Emergency-Stop Pushbuttons

CSW-B E __

Types

G - Twist release

Y - Key release

E-STOP - TWIST RELEASE E-STOP - KEY RELEASE

CSW-S D __

Color (see Color Code)

Pilot Lights

SD0

SD1

SD2

SD3

SD4

CSW-BEY

ILLUMINATED MUSHROOM (40mm HEAD)

BFI0

BFI1

BFI2

BFI3

BFI4

ILLUMINATED FLUSH

BCI0

BCI1

BCI2

BCI3

BCI4

$6.80

$16.10 $48.00$9.40

LIST PRICE

$11.20

LIST PRICE

$13.00

LIST PRICE

LIST PRICELIST PRICELIST PRICECSW-BEG

MULTIPLIER SYMBOL FOR CSW

SERIES - Z5

PILOT LIGHTS

COLOR CODE

(1) For increasing the degree of protection to IP66, use the protection cover APBD.(2) UL Pending.

CSW- __

NON-ILLUMINATED2

(Extended)

$9.00

LIST PRICE

CSW- __

DOUBLE1

CSW-BD

$15.30

LIST PRICE

(IP40)(1)

CSW- __

ILLUMINATED EXTENDED

BSI0

BSI1

BSI2

BSI3

BSI4

$11.00

LIST PRICECSW-__ CSW- __

Color Clear/White Red Green Yellow Blue Black

Code 0 1 2 3 4 5

Symbol

Controls

Pushbuttons and Pilot Lights - CSW Series (22mm)

CSW- __

MUSHROOM (40mm HEAD)

BC1

BC2$11.00

LIST PRICE

CSW- __

RECESSED

$7.00

LIST PRICECSW-__

BGA0

BGA1

BGA2

BGA3

BGA4

BGA5

BS1

BS2

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


CSW-C __ __ __ __ __

Angle45 - 45o

90 - 90o

HandleF - MaintainedR - Spring returnRE - Spring return from leftRD - Spring return from right

Types

K - Knob

A - Lever

Y - Key

KI - Illuminated Knob

Color code for illuminated selec-

tors switched (see Color Code)

Selector Switches

Controls


No. of Positions2 - Two positions

3 - Three positions

Maintained $15.00

Spring Return $17.00

Maintained $16.00


Maintained $46.00


Maintained $11.50


LIST PRICE LIST PRICE LIST PRICE LIST PRICE

CSW-CK2F45

CSW-CK2R45

CSW-CK2F90

CSW-CK2R90

CSW-CK3F45

CSW-CK3R45

CSW-CK3RE45

CSW-CK3RD45

CSW-CA2F45

CSW-CA2R45

CSW-CA2F90

CSW-CA2R90

CSW-CA3F45

CSW-CA3R45

CSW-CA3RE45

CSW-CA3RD45

CSW-CY2F45

CSW-CY2R45

CSW-CY2F90

CSW-CY2R90

CSW-CY3F45

CSW-CY3R45

CSW-CY3RE45

CSW-CY3RD45

CSW-CK2F90

CSW-CK3F45

CSW-CK3R45

CSW-CK3RE45

CSW-CK3RD45

CSW-CKI2F90*

CSW-CKI3F45*

CSW-CKI3R45*

CSW-CKI3RE45*

CSW-CKI3RD45*

Color Code

Color Clear/White Red Green Yellow Blue Black

Code 0 1 2 3 4 5

Symbol

* To complete seclection, replace “*” with desired color from table below.

KNOB LEVER with KEY (1) ILLUMINATED POSITION DIAGRAM

DIAGRAM 2 DIAGRAM 3DIAGRAM 1

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


220-240 VAC

22

0-2

40

VA

C

38

0-4

60

VA

C

Controls


Auxiliary Contact Blocks

BC11-CSW - 1NO/1NC

BC20-CSW - 2NO

BC01-CSW - 1NC

BC10-CSW - 1NO

- For Ba9s lamps 380V / 2W max.- Incandescent lamp included (130V, Ba9s)

CSW-BID

$5.00

BCA10-CSW - 1NOem (early make)

BCR01-CSW - 1NCdb (delayed break)

$6.00 $9.50

LIST PRICE LIST PRICE LIST PRICE

$26.70

Single Double

$5.10

LIST PRICE LIST PRICE

CSW-BIRDD66 CSW-LI E48-0 - 6W

CSW-LI E25-1 - 8W

CSW-LI E26 - 2W

CSW-LI E27 - 2W

CSW-LI E28-1 - 2W

CSW-LI E30 - 2W

CSW-LI E31 - 2W

6V 50-60Hz/DC

12V 50-60Hz/DC

24V 50-60Hz/DC

48V 50-60Hz/DC

60V 50-60Hz/DC

130V 50-60Hz/DC

220V 50-60Hz/DC (Neon)

$9.70

LIST PRICE

Full Voltage AC / DC Resistor + Diode (220 VAC) Lamps Incandescent (BA9S)

CSW-BIDL

Voltage level

12Vac/Vdc

24Vac/Vdc

48Vac/Vdc

110-130Vac

125Vdc

220-240Vac

Colors

0 White

1 Red

2 Green

3 Yellow

4 Blue

For 125Vdc only

$18.90

$16.00LIST PRICE

LIST PRICE

Code

E25 =

E26 =

E27 =

D61 =

C13 =

D66 =

$9.80

LIST PRICE

For 460 Vac

CSW-BRT-D85

(used with BIDL_D66)

For 380-460Vac voltage,

use BRT block

LED Blocks

BIDL BRT Blocks

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


CSW-BR-3P

Push On / Push Off Block

Note: Use only with single contact blocks. 1NO-contacts must be BCA10 (early make) type.

$9.30

LIST PRICE

- Device for lush, extended and mushroom pushbuttons

POTENTIOMETER

$128.00

LIST PRICE

CSW-POT_W

RESET

$17.00

LIST PRICE

CSW-RSBF_ _

Controls


Special Operators

CSW-POT __ W

Resistance

05 - 0.5kΩ 10 - 10kΩ 1 - 1kΩ 25 - 25kΩ 2 - 2kΩ 1M - 1MΩ 5 - 5kΩ

CSW-RSBF __ __

Markings

blank - no markings

O - Letter "O"

R - Letter "R"

RT - Word "reset" Color (see Color Code)

RSBF0

RSBF1

RSBF4

RSBF5

RSBF6

$20.00

LIST PRICE

Without markings With markings

Note: Plunger included as standard.

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls


Blank ID Plate

AP30

AP30T

Red face

White

background

Black face

Clear

Red face

White

background

APP30APP60

APP30T

APN

$0.60

AF3 3 positions AF5 5 positionsBlack face

Clear

$2.50 $4.80

Drilling reduction 30mm to 22mm

Plate Holder – Legend Plate Included Flange

$2.30

LIST PRICE


Legend Plates Reductor Ring Emergency Pushbutton Protection

$1.60LIST PRICE

$4.25LIST PRICE

LIST PRICE

Emergency Plate

APE-03

$8.30

LIST PRICE

$5.60 $5.60


Tools

ACEF Lamp extractor CPAW Fixing tool

ALSD0

ALSD1

ALSD2

ALSD3

ALSD4

Lens for Pilot Lights

$2.10

LIST PRICE

$4.90

LIST PRICE

Hole Plug

ATR

Protective Covers

APBF for flush pushbuttons

$7.70

LIST PRICE

APBD for double pushbutton

$15.60

LIST PRICE

Note: AF3 is always supplied with all operators.

AR30 APEG$10.00

LIST PRICE

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Engraved Legend Plates

Controls


Catalog Number Message Description List Price

Package with 5 units

For Pushbuttons & Indicating Lights

APP30-01 Close 22mm Legend Plate & Holder - Close $21.00

APP30-02 Down 22mm Legend Plate & Holder - Down $21.00

APP30-03 Emergency Stop 22mm Legend Plate & Holder - Emergency Stop $21.00

APP30-04 Forward 22mm Legend Plate & Holder - Forward $21.00

APP30-05 Jog 22mm Legend Plate & Holder - Jog $21.00

APP30-06 Jog Forward 22mm Legend Plate & Holder - Jog Forward $21.00

APP30-07 Jog Reverse 22mm Legend Plate & Holder - Jog Reverse $21.00

APP30-08 Lower 22mm Legend Plate & Holder - Lower $21.00

APP30-09 Off 22mm Legend Plate & Holder - Off $21.00

APP30-10 On 22mm Legend Plate & Holder - On $21.00

APP30-11 Open 22mm Legend Plate & Holder - Open $21.00

APP30-12 Power On 22mm Legend Plate & Holder - Power On $21.00

APP30-13 Raise 22mm Legend Plate & Holder - Raise $21.00

APP30-14 Reset 22mm Legend Plate & Holder - Reset $21.00

APP30-15 Reverse 22mm Legend Plate & Holder - Reverse $21.00

APP30-16 Run 22mm Legend Plate & Holder - Run $21.00

APP30-17 Start 22mm Legend Plate & Holder - Start $21.00

APP30-18 Stop 22mm Legend Plate & Holder - Stop $21.00

APP30-19 Up 22mm Legend Plate & Holder - Up $21.00

APP30-147 Fault 22mm Legend Plate & Holder - Fault $21.00

For two-position Selector Switch

APP30-20 Forward Reverse 22mm Legend Plate & Holder - Forward Reverse $21.00

APP30-21 Hand Auto 22mm Legend Plate & Holder - Hand Auto $21.00

APP30-22 Jog Run 22mm Legend Plate & Holder - Jog Run $21.00

APP30-23 Manual Auto 22mm Legend Plate & Holder - Manual Auto $21.00

APP30-24 Off On 22mm Legend Plate & Holder - Off On $21.00

APP30-25 Open Close 22mm Legend Plate & Holder - Open Close $21.00

APP30-26 Run Jog 22mm Legend Plate & Holder - Run Jog $21.00

APP30-27 Start Stop 22mm Legend Plate & Holder - Start Stop $21.00

APP30-28 Up Down 22mm Legend Plate & Holder - Up Down $21.00

For three-position Selector Switch

APP30-29 Auto Off Hand 22mm Legend Plate & Holder - Auto Off Hand $21.00

APP30-30 For Off Rev 22mm Legend Plate & Holder - For Off Rev $21.00

APP30-31 Hand Off Aut 22mm Legend Plate & Holder - Hand Off Aut $21.00

APP30-32 Man Off Auto 22mm Legend Plate & Holder - Man Off Auto $21.00

APP30-33 Open Off Auto 22mm Legend Plate & Holder - Open Off Auto $21.00

APP30-34 Open Off Close 22mm Legend Plate & Holder - Open Off Close $21.00

APP30-35 Up Off Down 22mm Legend Plate & Holder - Up Off Down $21.00

APP30-149 Auto Off Rev 22mm Legend Plate & Holder - Auto Off Rev $21.00

APP30-198 Low Med High 22mm Legend Plate & Holder - Low Med High $21.00

APP30-199 Low Off High 22mm Legend Plate & Holder - Low Off High $21.00

For Push/Pull units

APP30-36 ON/OFF 22mm Legend Plate & Holder - ON/OFF $21.00

APP30-37 OPEN/CLOSE 22mm Legend Plate & Holder - OPEN/CLOSE $21.00

APP30-38 UP/DOWN 22mm Legend Plate & Holder - UP/DOWN $21.00

For Potentiometers 1)

APP30-P00 0 - 100 22mm Legend Plate & Holder - (Blank 0 - 100) $6.00

APP30-P01 0 - 10 22mm Legend Plate & Holder - (Blank 1 - 10) $6.00

APP30-P02 Speed 0 - 10 22mm Legend Plate & Holder - (Speed 1 - 10) $6.00

APP30-P03 Speed 0 - 100 22mm Legend Plate & Holder - (Speed 1 - 100) $6.00 1) Package with 1 unit.

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


BIDL Block Ratings

Rated operational voltage 0,85 ~1,10 x V

Rated current 20 mA

Rated impulse voltage 2,5 kV (IEC 947-5-1)

Temperature range - 25 to 70°C (-73ºF to 158ºF)

Life 100.000 h

Luminosity Red: 70 mcd

Yellow: 115 mcd

White: 275 mcd

Blue: 64 mcd

Green: 150 mcd

Standards IEC/EN 60947-5-1, VDE 0660, NFC63140, UL 508, UL 50, CENELEC

EN50007

Rated insulation voltage 660 Vac / Vdc

Degree of protection IP66 (IEC/EN 60529)

Degree of protection - Terminals IP2X (IEC/EN 60529)

UL ratings Type 1, 2, 3, 3R, 35, 4, 4X, 5,12, 12K e 13

Electrical ratings

Conventional thermal current Ith = 10A (IEC 947-5-1)

Utilization category AC-15

(V) (A)

24 10

48 10

60 10

110 6

230 3

400 2

500 1,5

600 1,2

Utilization category DC-13 (V) (A)

24 2,5

48 1,4

60 1

110 0,55

230 0,27

400 0,2

600 0,1

UL / CSA ratings AC / Heavy Duty (A600)

DC / Standard Duty (Q600)

Contacts resistance ≤ 25mΩ (IEC/EN 60255) Short circuit protection 16A gL/gG fuse or MPW25-10

Electrical shock protection Class II

Rated impulse voltage 2,5 kV (IEC 947-5-1)

Terminal capacity 1 or 2 x (0.5 - 2.5mm2) / 1 or 2 x 14-20AWG

Temperature range -25ºC to 70ºC (-13ºF to 158ºF)

Shock resitance No damage or disassembling at 100g for all devices

According to MIL 202 B

method 202A ≤ ½ sinusoid 11msVibration resistance 16g with frequency range from 40 to 500Hz

IEC/EN 6068-2-6 and max shifting 0,75mm (peak-to-peak)

Mechanical endurance

Pushbuttons 3 x 106

Selector Switches 1 x 106

Emergency-Stop 3 x 105

Maximum number of contacts AF3 Flange AF5 Flange

Pushbuttons (BF) Max. 6 Max. 10

Controls


PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


BF BEG / BC / BCIBEY

BFI

.

. .

.

.

.

.

.

.

.

.

.

.

BSIBD

Selector Switches

CKI CY CK CA

.

.

Contact Blocks

BC 10/01 BC 11/20

.

.

BCA10 BCR01

Pilot Lights LED and Lamp Blocks Drilling

SD BIDL / BID / BIRD(AF5)

(AF3).

.

.

.

BRAPPAPE APEG

Push On / Push Off Block Accessories

Controls

Pushbuttons and Pilot Lights - CSW Series (22mm)Dimensions (mm)

. . . .

.

.

.

.

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls

Pushbutton and Pilot Light - CSW30 Series (30mm)

The WEG 30mm pushbuttons, selector switches, and indicators have

been designed to offer the ruggedness required for severe industrial

applications and environments. These modular devices offer superior

quality at an affordable price.

Our hazardous duty series CSW30H also offers a wide selection of ope-

rators and pilot devices for hazardous duty applications (Class 1, Division

2 and Zone 2). This line offers a wide selection of hermetically sealed

reed and factory sealed contact blocks for superior corrosion resistance.

• NEMA 4, IP65 Rated;• Fits 1-13/64 (30.5mm) hole without notch required ;• Contact blocks snap-in (fast & easy assembly);• Up to 8 contact blocks for non-illuminated operators and up to 4 contact blocks for illuminated operators

• LED lamps with built-in leakage protection;• Same simple part numbering system as 22mm series.

Industrial Duty - CSW30 Series

UL listed and rated 4 / 4X for

watertight and corrision resistance

Hazardous Duty - CSW30H Series

Specially engineered for Class 1,

Division 2 and Zone 2

Certifications

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls


FLUSH

BF0

BF1

BF2

BF3

BF4

BF5

Types

F - Flush


GA - Recessed

GAI - Illuminated Recessed



CSW-B E __

Types

G - Twist release

E-STOP - TWIST RELEASE E-STOP - PUSH PULL

Pilot Lights

SD0

SD1

SD2

SD3

SD4

CSW30-BEP

$26.00

$81.00 $75.00$89.00

LIST PRICE

LIST PRICELIST PRICELIST PRICECSW30-BEG

MULTIPLIER SYMBOL FOR CSW-30

SERIES - Z55

PILOT LIGHTS

CSW30 - __

NON-ILLUMINATED (Extended)

BS0

BS1

BS2

BS3

BS4

BS5

$26.00

LIST PRICE

CSW30 - __

CSW30 - __ *


$37.00

LIST PRICE

CSW30 - __

RECESSED

$32.00

LIST PRICECSW30 -__

BGA0

BGA1

BGA2

BGA3

BGA4

BGA5

Pushbuttons

CSW30-BEG2 CSW30-BEP2


ILLUMINATED RECESSED

$100.00

LIST PRICECSW30 -__ *

BGAI0

BGAI1

BGAI2

BGAI3

BGAI4

CSW30-B__ __ __Voltage (see Voltage Code)


* Illuminated operators are supplied with LED block. To

complete selection, replace “*” with desired voltage:

E26 (24Vac/Vdc), D61 (120Vac/Vdc) or D66 (240Vac/Vdc).

CODE CHART Color Clear/White Red Green Yellow Blue Black

Code 0 1 2 3 4 5

Symbol

LED Block Voltage

E26 24Vac/Vdc

D61 120Vac/Vdc

D66 240Vac/Vdc

CSW30-S D __ __Voltage (see Voltage Code)


For illuminated only

CSW30 -__ *

BSI0

BSI1

BSI2

BSI3

BSI4

BCI0

BCI1

BCI2

BCI3

BCI4

BC1

BC2

BC5

$93.00

LIST PRICE $100.00

LIST PRICECSW30 - __ *


PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


oltage Code)

KNOB LEVER with KEY(1) POSITION DIAGRAM

Controls


CSW30-C __ __ __ ___

Angle45 - 45o

90 - 90o


Types

K - Knob

A - Lever

Y - Key

Selector Switches


3 - Three positions

4 - Four positions

Maintained $39.00


Maintained $39.00


Maintained $110.00


LIST PRICE LIST PRICE LIST PRICE

CSW30-CK2F90

CSW30-CK2R90

CSW30-CK3F45

CSW30-CK3R45

CSW30-CK3RE45

CSW30-CK3RD45

CSW30-CA2F90

CSW30-CA2R90

CSW30-CA3F45

CSW30-CA3R45

CSW30-CA3RE45

CSW30-CA3RD45

CSW30-CY2F90

CSW30-CY2R90

CSW30-CY3F45

CSW30-CY3R45

CSW30-CY3RE45

CSW30-CY3RD45

CSW30-CK4F18 CSW30-CA4F18 CSW30-CY4F18

1

1

2

2

2

2

3

DIAGRAM 1 DIAGRAM 2 DIAGRAM 3

HANDLE POSITION Auxiliary

Contact

Mouting

Position


Contact

Mouting

Position


Contact

Mouting

PositionI II I 0 II I II III IV

O X NO Either X O O NO Left X O O O NO Left

X O NC Either O O X NO Right O O O X NO Right

O X early make Either O X O NC Either O O X O NC Left

X O late break Either X O X early make Either O X O O NC Right

O X X late break Left X X O X early make Left

X X O late break Right X O X X early make Right

O X X X late break Left

X X X O late break Right

X = OPEN

O = CLOSED

1) Key is released on any position. Consult WEG for other configuration.

V

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


EMERGENCY PLATE

CONTACT BLOCKS

$13.00 $13.00

LIST PRICELIST PRICENormally Open Normally Closed$17.00 $17.00

LIST PRICELIST PRICEEarly Make Late BreakBC10-CSW30 BC01-CSW30 BCA10-CSW30 BCR01-CSW30

Accessories

CLAMP RING WRENCH

$30.00

LIST PRICE

CPAW30

Simplifies the tighening or

loosening of polyester and

aluminum 1-3/8” clamp rings.

30MM HOLE PLUG

ATR30

NEMA 4X rated plug to seal up

unwanted panel holes.

Part Number Description List Price

CSW30-BIDL3E26 Yellow 24vac/24vdc $28.00

CSW30-BIDL4E26 Blue 24vac/24vdc $28.00

CSW30-BIDL2E26 Green 24vac/24vdc $28.00

CSW30-BIDL1E26 Red 24vac/24vdc $28.00

CSW30-BIDL0E26 White 24vac/24vdc $28.00

CSW30-BIDL3D61 Yellow 120vac/120vdc $28.00

CSW30-BIDL4D61 Blue 120vac/120vdc $28.00

CSW30-BIDL2D61 Green 120vac/120vdc $28.00

CSW30-BIDL1D61 Red 120vac/120vdc $28.00

CSW30-BIDL0D61 White 120vac/120vdc $28.00

Replacement LED bulbs for 240Vac/Vdc illuminated operators are the “E26” (24Vac/Vdc) bulbs. Please refer to the correct color when ordering.

LED Bulbs

$25.00

LIST PRICE

Controls

Pushbutton and Pilot Light - CSW30 Series (30mm)Auxiliary Contacts

Our standard contact blocks are color coded for easy circuit

identification to minimize wiring errors. WEG’s contact blocks

are stackable up to 4 deep (for a total of up to 8 circuits per

operator) without the need of any additional accessory. Combi-

ning different contact blocks types enable several functions to be

achieved.

APE30-03

$10.00

LIST PRICE

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls


POTENTIOMETER

WOBBLE STICK

$145.00

LIST PRICE

$65.00

LIST PRICE

CSW30-POT_W

RESET

22.00

LIST PRICE

CSW30-RSBW

CSW30-WS

BOOTED CABLE PULL

$130.00

LIST PRICECSW30-CPBT

PUSH ON / PUSH OFF BLOCK

$37.00

LIST PRICE

BR3P-CSW30

Special Operators

CSW30-POT __ W

Resistance

1 - 1kΩ 10 - 10kΩ 2 - 2kΩ 50 - 50kΩ 5 - 5kΩ

Note: Plunger included as standard.

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls

Pushbutton and Pilot Light - CSW30 Series (30mm)Engraved Legend Plates

Catalog Number Marking Description List Price Package

with 1 unit

For Pushbuttons & Indicating Lights

APP30S-01 Close 30mm Legend Plate & Holder - Close $6.00

APP30S-02 Down 30mm Legend Plate & Holder - Down $6.00

APP30S-03 Emergency Stop 30mm Legend Plate & Holder - Emergency Stop $6.00

APP30S-04 Forward 30mm Legend Plate & Holder - Forward $6.00

APP30S-05 Jog 30mm Legend Plate & Holder - Jog $6.00

APP30S-06 Jog Forward 30mm Legend Plate & Holder - Jog Forward $6.00

APP30S-07 Jog Reverse 30mm Legend Plate & Holder - Jog Reverse $6.00

APP30S-08 Lower 30mm Legend Plate & Holder - Lower $6.00

APP30S-09 Off 30mm Legend Plate & Holder - Off $6.00

APP30S-10 On 30mm Legend Plate & Holder - On $6.00

APP30S-11 Open 30mm Legend Plate & Holder - Open $6.00

APP30S-12 Power On 30mm Legend Plate & Holder - Power On $6.00

APP30S-13 Raise 30mm Legend Plate & Holder - Raise $6.00

APP30S-14 Reset 30mm Legend Plate & Holder - Reset $6.00

APP30S-15 Reverse 30mm Legend Plate & Holder - Reverse $6.00

APP30S-16 Run 30mm Legend Plate & Holder - Run $6.00

APP30S-17 Start 30mm Legend Plate & Holder - Start $6.00

APP30S-18 Stop 30mm Legend Plate & Holder - Stop $6.00

APP30S-19 Up 30mm Legend Plate & Holder - Up $6.00

APP30S-147 Fault 30mm Legend Plate & Holder - Fault $6.00

APP30S-100 Auto 30mm Legend Plate & Holder - Auto $6.00

APP30S-101 Fast 30mm Legend Plate & Holder - Fast $6.00

APP30S-102 Hand 30mm Legend Plate & Holder - Hand $6.00

APP30S-103 Low 30mm Legend Plate & Holder - Low $6.00

APP30S-104 Manual 30mm Legend Plate & Holder - Manual $6.00

APP30S-105 Out 30mm Legend Plate & Holder - Out $6.00

APP30S-106 Overload 30mm Legend Plate & Holder - Overload $6.00

APP30S-107 Push-to-Reset 30mm Legend Plate & Holder - Push-to-Reset $6.00

APP30S-108 Slow 30mm Legend Plate & Holder - Slow $6.00

APP30S-109 Trip 30mm Legend Plate & Holder - Trip $6.00

APP30S-148 Motor Run 30mm Legend Plate & Holder - Motor Run $6.00

APP30S-149 Power Off 30mm Legend Plate & Holder - Power Off $6.00

APP30S-150 Push-to-Test 30mm Legend Plate & Holder - Push-to-Test $6.00

APP30S-151 Test 30mm Legend Plate & Holder - Test $6.00


APP30S-20 Forward -Reverse 30mm Legend Plate & Holder - Forward Reverse $6.00

APP30S-21 Hand - Auto 30mm Legend Plate & Holder - Hand Auto $6.00

APP30S-22 Jog - Run 30mm Legend Plate & Holder - Jog Run $6.00

APP30S-23 Manual - Auto 30mm Legend Plate & Holder - Manual Auto $6.00

APP30S-24 Off - On 30mm Legend Plate & Holder - Off On $6.00

APP30S-25 Open - Close 30mm Legend Plate & Holder - Open Close $6.00

APP30S-26 Run - Jog 30mm Legend Plate & Holder - Run Jog $6.00

APP30S-27 Start - Stop 30mm Legend Plate & Holder - Start Stop $6.00

APP30S-28 Up - Down 30mm Legend Plate & Holder - Up Down $6.00

APP30S-153 Down - Up 30mm Legend Plate & Holder - Down Up $6.00

APP30S-154 Local - Remote 30mm Legend Plate & Holder - Local Remote $6.00

APP30S-156 Reverse - Forward 30mm Legend Plate & Holder - Reverse Forward $6.00

APP30S-157 Stop - Start 30mm Legend Plate & Holder - Stop Start $6.00

APP30S-110 Auto - Hand 30mm Legend Plate & Holder - Auto Hand $6.00

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Catalog Number Marking Description List Price Package

with 1 unit


APP30S-111 Auto -Manual 30mm Legend Plate & Holder - Auto Manual $6.00

APP30S-112 Fast - Slow 30mm Legend Plate & Holder - Fast Slow $6.00

APP30S-113 High - Low 30mm Legend Plate & Holder - High Low $6.00

APP30S-114 Inch - Run 30mm Legend Plate & Holder - Inch Run $6.00

APP30S-115 Left - Right 30mm Legend Plate & Holder - Left Right $6.00

APP30S-116 On - Off 30mm Legend Plate & Holder - On Off $6.00

APP30S-119 Raise - Lower 30mm Legend Plate & Holder - Raise Lower $6.00

APP30S-120 Slow - Fast 30mm Legend Plate & Holder - Slow Fast $6.00

APP30S-121 Summer - Winter 30mm Legend Plate & Holder - Summer Winter $6.00

For three-position Selector Switch

APP30S-29 Auto - Off - Hand 30mm Legend Plate & Holder - Auto Off Hand $6.00

APP30S-30 Forward - Off -

Reverse

30mm Legend Plate & Holder - For Off Rev $6.00

APP30S-31 Hand - Off - Auto 30mm Legend Plate & Holder - Hand Off Aut $6.00

APP30S-32 Manual - Off - Auto 30mm Legend Plate & Holder - Man Off Auto $6.00

APP30S-33 Open - Off - Auto 30mm Legend Plate & Holder - Open Off Auto $6.00

APP30S-34 Open - Off - Close 30mm Legend Plate & Holder - Open Off Close $6.00

APP30S-35 Up - Off - Down 30mm Legend Plate & Holder - Up Off Down $6.00

APP30S-198 Low - Med - High 30mm Legend Plate & Holder - Low Med High $6.00

APP30S-199 Low - Off - High 30mm Legend Plate & Holder - Low Off High $6.00

APP30S-158 Down - Off - Up 30mm Legend Plate & Holder - Down Off Up $6.00

APP30S-159 Jog - Off - Auto 30mm Legend Plate & Holder - Jog Off Auto $6.00

APP30S-160 Raise - Off - Lower 30mm Legend Plate & Holder - Raise Off Lower $6.00

APP30S-161 Local - Off - Remote 30mm Legend Plate & Holder - Local Off Remote $6.00

APP30S-162 Forward - Auto - Rev 30mm Legend Plate & Holder - Fwd Auto Rev $6.00

APP30S-122 Auto - Manual - Off 30mm Legend Plate & Holder - Auto Manual Off $6.00

APP30S-123 High - Off - Low 30mm Legend Plate & Holder - High Off Low $6.00

APP30S-124 Off - Run - Start 30mm Legend Plate & Holder - Off Run Start $6.00

APP30S-125 Off - Start - Run 30mm Legend Plate & Holder - Off Start Run $6.00

APP30S-126 Off - 1 - 2 30mm Legend Plate & Holder - Off 1 2 $6.00

APP30S-127 Slow - Off - Fast 30mm Legend Plate & Holder - Slow Off Fast $6.00

APP30S-128 Summer - Off -Winter 30mm Legend Plate & Holder - Summer Off Winter $6.00

APP30S-129 1 - Off - 2 30mm Legend Plate & Holder - 1 Off 2 $6.00

APP30S-130 1 - 2 - 3 30mm Legend Plate & Holder - 1 2 3 $6.00

For Push/Pull units

APP30S-36 On - Off 30mm Legend Plate & Holder - On / Off $6.00

APP30S-37 Open - Close 30mm Legend Plate & Holder - Open / Close $6.00

APP30S-38 Up - Down 30mm Legend Plate & Holder - Up / Down $6.00

APP30S-152 Pull Start - Push Stop 30mm Legend Plate & Holder - Pull Start / Push Stop $6.00

APP30S-155 Push to Stop - Pull

to Start

30mm Legend Plate & Holder - Push to Stop / Pull to Start $6.00

APP30S-117 Push Off - Pull On 30mm Legend Plate & Holder - Push Off / Pull On $6.00

APP30S-118 Push On - Push Off 30mm Legend Plate & Holder - Push On / Push Off $6.00

For Potentiometers

APP30S-P00 0 - 100 30mm Legend Plate & Holder - (Blank 0 - 100) $6.00

APP30S-P01 0 - 10 30mm Legend Plate & Holder - (Blank 1 - 10) $6.00 APP30S-P02 Speed 0 - 10 30mm Legend Plate & Holder - (Speed 1 - 10) $6.00 APP30S-P03 Speed 0 - 100 30mm Legend Plate & Holder - (Speed 1 - 100) $6.00

Controls

Pushbutton and Pilot Light - CSW30 Series (30mm)Engraved Legend Plates

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls


ELECTRICAL RATINGS

Industry Current Draw Lamp Shock & Leakage

Lamp Number Rated Volts Lumens (MSCD) Design Life (Hrs.) (mA) Type Vibration Protection

BIDL6 ** 6V 100,000 50 LED Excellent 14 mA

BIDL12 ** 12V Varies w/ Color 100,000 <20 LED Excellent 4 mA

BIDL24 ** 24V 2000 mcd 100,000 <20 LED Excellent 4 mA

BIDL130 ** 120/130V 100,000 <10 LED Excellent 2 mA

*Specify lamp color when ordering.

DIELECTRIC STRENGTH (TERMINAL TO GROUND) 2200V for 1 Minute

STANDARD CONTACTS Utilization Category

IEC UL Make Rating Break Rating Ith-Thermal Current

AC AC-15 A600 7200VA 720VA 10A

DC DC-13 P300 138VA 138VA 5A Note: For AC voltage below 72V AC the max. allowed switching current is 10A = Ith. For DC voltages below 28V DC the max. allowed switching current is 5A =Ith.For switching applications below 24V/40mA - Hermetic REED contacts are recommended. Hermetic Reeds are also excellent in environments containing chemical vapors, oxidizing agents, and explosive gases. Please refer to the HAZARDOUS section of the 30mm devices for more information.

30MM INDUSTRIAL PILOT DEVICES

Varies w/ Color 2000 mcd

Typical

OPERATING FORCES

Pushbuttons (Operator Only) Momentary 1.3 lbs. [5.8 N]

Illuminated Momentary 2.8 lbs. [12.4 N]

Maintained 4 to 6 lbs. [17.9~26.7 N]

Illuminated Maintained 4.6 lbs. [20.5 N]

Reset Push Button 1.5 lbs. [6.7 N]

Selector Switches Maintained 1.7 in-lbs [.19 Nm]

Momentary 1.7 in-lbs [.19 Nm]

Key Operated 1.7 in-lbs [.19 Nm]

Cable Pull

Standard 4 to 6 lbs. [17.9~26.7 N]

Heavy Duty 13 lbs. [57.8 N]

Push-Twist Release 4.7 lbs. [20.9 N]

Potentiometer 2 Watt ”J” Series 3-12 in-oz. [.11 Nm Max.] ( 300° Rotation )

Standard Contact Blocks 1 lb. [4.45 N]

Indicating Lights Refer to the appropriate Lamp Data

Multi-Voltage Light 20-240 VAC/VDC (Burden .65W max.)

Transformer 2 VA

MATERIALS

Thermoplastic Polyester and Polyester Blends (UV Stabilized for outdoor use)

Operator Housings

Operator Caps and Handles - Non-Illuminated (Glass Reinforced Grades)

Mounting Rings and Nuts

Thrust Washer

Trim Washer

High Impact Polycarbonate (UV Stabilized for outdoor use)

Pilot Light Lens

Transparent PB and Mushroom Caps

Custom Polymers

Certain CAM and Bearing parts are Teflon, Silicone, & Moly-Disulfide Impregnated for improved wearability

Fluorosilicone and Thermoplastic Neoprene Boot Accessories

Seals

Neoprene Gaskets

Thermoplastic – Molded Neoprene and alloy derivitives

BUNA N – Rubber – Teflon Coated

Thermoplastic – Elastomer Molded Seals

Fluorosilicone – Boots

Metal: Brass & Stainless Steel Push Pull Bushings Internal tubes for Maintained Devices Detents for Maintained Devices

Springs (Stainless Steel throughout)

Aluminum Optional Mounting Nut

MECHANICAL DESIGN LIFE CYCLES

Push Buttons

Momentary 5,000,000

Maintained 250,000

Selector Switches 500,000

All Other Devices 250,000

Standard Contact Blocks 10,000,000

Indicating Lights – Refer to the appropriate Lamp Data

ENVIRONMENTAL RATINGS

TYPE 1, 2, 3, 3R, 4/4X, 12, 13, and IP65

Operating Temperature -40 to +131° F ( -40 to +55° C )

Storage Temperature -40 to +185° F ( -40 to +85° C )

Operating environments below freezing temperatures are assumed to be absent of

freezing liquids or pollutants.

TERMINAL & WIRING CONSIDERATION

Wire- AWG 22-12 CU (Copper Only – Solid & Stranded) [.5 ~ 4 mm2 ] One or Two wires permitted per termination

Recommended Tightening Torque 7 lb-in (+3.0/-0.0 lb-in) — [ .8 Nm ]

Technical Data

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls

Pushbutton and Pilot Light - CSW30 Series

MOMENTARY & MAINTAINED NON-ILLUMINATED PUSH BUTTONS

7/16"(11.1mm)

1-1/2"(38.1mm)

7/8"(22.5mm)

Add'lblocks

Panel Thk. shown3/16" (4.8mm)

Non-Illuminated Operator (shown with Flush Cap)

7/16"(11.1mm)

1-9/16"(39.7mm)

1-11/16"(42.9mm)

Momentary Flush Cap

9/16"(14.3mm) 1-9/16"

(39.7mm)

1-11/16"(42.9mm)

Momentary Extended Cap

1-3/8"(34.9mm)

1-9/16"(39.7mm)

1-9/16"(39.7mm)

1-11/16"(42.9mm)

Momentary 1-1/2” (38mm) Mushroom Cap

1-3/8"(34.9mm)

2-1/4"(57.2mm)

1-9/16"(39.7mm)

1-5/8"(41.3mm)

Momentary 2-1/4” (57.2mm) Jumbo Mushroom Cap

1-5/8"(41.3mm)

1-9/16"(39.7mm)

1-7/16"(36.5mm)

2-5/8"(66.7mm)

Momentary 2-1/4” (57.2mm) Shrouded Jumbo Mushroom Cap

1-3/16"(20.6mm)

1-1/2"(38.1mm)

1-9/16"(39.7mm)

1-5/8"(41.3mm)

Momentary Standard Rubber Boot

1-7/16"(36.5mm)Out Dim.

1-3/16"(30.2mm)

In Dim.

1-9/16"(39.7mm)

1-5/8"(41.3mm)

2-Position Push-Pull Maintained 1-1/2” (38mm) Mushroom Cap

13/16"(20.6mm)

1-9/16"(39.7mm)

1-11/16"(42.9mm)

1-9/16"(39.7mm)

Momentary Fluorosilicone Rubber Boot

ø1-7/8”

(ø45.2mm)

1-7/16”

(36.5mm)

1-3/16”

(30.2mm)

Momentary 1-1/2” (38mm) Shrouded Mushroom Cap

1-3/16"(30.2mm)

In Dim.

1-7/16"(36.5mm)

In Dim.

1-9/16"(39.7mm)

1-5/8"(41.3mm)

2-Position Push-Pull Maintained 2-1/4” (57.2mm) Jumbo Mushroom Cap

1-7/16”

(36.5mm)

1-9/16”

(39.7mm)

1-5/8”

(41.3mm)

2-Position Push-Twist Maintained 1-1/2” (38mm) Mushroom Cap

Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.

11/16”

(17.5mm) 1-9/16”

(39.7mm)

1-11/16”

(42.9mm)

Momentary Guarded Flush Cap

11/16”

(17.5mm)1-9/16”

(39.7mm)

1-11/16”

(42.9mm)

Momentary GuardedExtended Cap

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls


2-1/8"(54mm)

1-5/8"(41.3mm)

MOMENTARY ILLUMINATED PUSH BUTTONS

2 & 3 POSITION PUSH-PULL MAINTAINED ILLUMINATED PUSH BUTTONS

Illuminated Full Voltage Operator

1-7/16"(36.5mm)

2-1/16"(52.4mm)

7/8"(22.5mm)Add'lblocks

Panel Thk.(3/16" (4.8mm) shown)

1-9/16"(39.7mm)

)

1-5/8"(41.3mm)

2-1/8"(54mm)

Illuminated Transformer and Resistor Operators

1-7/16"(36.5mm)

3-1/16" (77.8mm)

2-1/16"(52.4mm)

7/8"(22.5mm)Add'lblock




1-7/16”

(36.5mm)

1-9/16”

(39.7mm)

1-1/2”

(39.7mm)

1-15/16”

(49.2mm)

1-3/4”(44.5mm)

1-5/8”(41.3mm)

1-11/16”(42.9mm)

1-1/2”(39.1mm)

1-5/8”(41.3mm)

Panel Thk. shown3/16” (4.8mm)

Illuminated Full Voltage, Transformer, Resistor and Dual-Input Operators


2-3/16"(55.6mm)

1-5/8"(41.3mm)


1-1/2"(38.1mm) 1-3/4"

(44.5mm)

1-5/8"(41.3mm)

1-1/4"(31.8mm)

1-5/8"(41.3mm)



1-9/16"(39.7mm)

1-3/4"(44.5mm)

1-5/8"(41.3mm)

Illuminated Full Voltage Operators

Illuminated Shrouded Mushroom Lens

Illuminated Guarded Lens

RESET PUSH BUTTON

1-3/8"(34.9mm)

7/16"(11.1mm)

1/2"(12.7mm)

Travel


ALTERNATE ACTION BLOCK

1-11/16”

(42.9mm)

11/16”

(17.5mm) 2-3/16”

(55.6mm)

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls


1”(25.4mm)

2-1/8”(54mm)


1-5/8”(41.3mm)

1-9/16”(39.7mm)

1 32

WOBBLE STICK

MOUNTING HOLE

1-9/16”

(39.7mm)

1-5/8”

(41.3mm)

3-3/16”

(80.96mm)

1-1/2”

(39.7mm)

7/8”

(22.2mm)

1-5/8”

(41.3mm)

1/4”

(6.3mm)

ø1-3/16”

(ø80.96mm)

MULTIPLE

GASKETS

ADD PER

CONTACT


Potentiometer Operator (shown with Terminal Block)

Potentiometer Operator (shown without Terminal Block)

1"(25.4mm)

1-3/4"(44.5mm)

1-3/8"(34.9mm)


1-9/16"(39.7mm)

1-5/8"(41.3mm)

1-9/16"(39.7mm)

1-5/16" (33.3mm)

POTENTIOMETER WITH & WITHOUT TERMINAL BLOCK


CONTACT BLOCKS

7/8"(22.5mm)

1-3/8"(34.9mm)

1-11/16"(42.9mm)

7/8"(22.5mm)

11/16"(17.5mm)

5/16"(7.9mm)

5/16"(7.9mm)

CONTACT BLOCK CONTACT BLOCK (SHOWN WITH IP20 TERMINAL GUARD)

LOCATION FOR M6 TERMINAL BLOCK MARKER

15/16"(24.5 mm)

1-5/8"(41.1 mm)

7/8"(21.6 mm)

CABLE PULL OPERATORS

Momentary and Heavy Duty Cable Pull Operators

Momentary Booted Cable Pull Operator


2-3/8"(60.3mm)

1/2"(12.7mm)

7/8"(22.5mm)

Add'lblock


1/4"(6.4mm)

Throw

1-9/16"(39.7mm)

1-5/8"(41.3mm)

Push-Pull Maintained Cable Pull Operator

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls


X1 X2

11/16”(17.3mm)

1-9/16”(39.6mm)

ø51/64”(ø20.2mm)

1-3/8”(34.8mm)

ø1-3/32”(ø27.7mm)


PILOT LIGHTS

1-3/4”(44.4mm)

1-5/8”(41.2mm)

1-7/64”(28.2mm)

3/16”(4.7mm)

2-11/64”(55.1mm)

25/128”(5mm)

IP20 Terminal Guard

1”(25.4mm)

Transformer & Resistor Pilot Light Operators Dual Input Pilot Light Operator

Fully-assembled operators come standard with one 3/16” (4.8mm) and two 1/16” (1.6mm) gaskets.

MAINTAINED FLUSH & EXTENDED PUSH BUTTON CAPS

1-3/8"(34.9mm)

1-1/2"(38.1mm)

1-3/8"(34.9mm)


1-9/16"(39.7mm)

1-5/8"(41.3mm)

7/8"(22.5mm)

Add'lblock

1-1/2"(38.1mm)

1-3/8"(34.9mm)

Maintained Extended Push Button Cap


Maintained Flush Push Button Cap (shown with an operator and contact block)

Full Voltage Unibody Pilot Light Operator

1-5/8”(41.2mm)

1-5/8”(41.2mm)

1-1/64”(25.8mm) 2-1/128”

(51mm)25/128”(5mm)

IP20 Terminal Guard3/16”

(4.7mm)1-1/128”(25.5mm)

Multi-Voltage Pilot Light

MULTI-VOLTAGE PILOT LIGHT UNIBODY PILOT LIGHTS

Fully-assembled operators come standard with four 1/16” (1.6mm) gaskets.

1-7/8”(47.3mm)

1-13/16”(46mm)

1-1/16”(27.1mm)

11/16”(17.7mm)

Full Voltage Pilot Light Operator

1-1/16"(27mm)

2-3/16"(55.6mm)

1-5/8" (41.3mm) 7/8"(22.5mm)Add'lblocks


PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls


PUSH-TO-TEST PILOT LIGHTS


1-3/4"(44.5mm)

1-5/8"(41.3mm)

Full Voltage, Transformer & Resistor Push-To-Test Operators

Full Voltage, Transformer & Resistor Push-To-Test Operators

1-3/4"(44.5mm)

1-5/8"(41.3mm)

2-1/2"(163.5mm)

1-1/2"(38.1mm)


1-1/4"(31.8mm)

2-1/2"(63.5mm)

Panel Thk.(3/16" (4.8mm) shown)GUARDED LENS

1-11/16”

(42.9mm)

1-9/16”

(39.7mm)

1-1/2”

(39.7mm)

SHROUDED MUSHROOMS LENS

1-7/16”(36.5mm)

1-5/8”(41.3mm)

1-3/4”(44.45mm)

ø1-15/16”(ø49.2mm)

SELECTOR SWITCHES

Selector Switch Operator (shown with standard handle)

1-1/8"(28.6mm)

1-7/16"(36.5mm)


7/8"(22.5mm)Add'lblock

1-5/8"(41.3mm)

1-5/8"(41.3mm)

Selector Switch Lever Handle

1" (25.4mm) Swing Radius

1-1/8"(28.6mm)

31/32"(787.4mm)

Keyed Selector Switch Operator

2-7/32"(56.2mm)

1-17/32"(38.9mm)

1-3/8"(34.9mm)


1-39/64"(40.8mm)

1-39/64"(40.8mm)

7/8"(22.5mm)Add'lcontacts

1-3/8"(34.7mm)


LOCK-OFF ATTACHMENT

2-11/16"(68.1mm)

1-21/32”(42mm)

3/16”(4.7mm)

37/64”(14.7mm)

1-15/32”(37.5mm)

5-7/64"(129.8mm)

2-11/16"(68.1mm)

2”(50.9mm)

1-55/64"(47mm)

ø1-7/32”(ø30.7mm)

CAVITYHEIGHT

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls

Pushbutton and Pilot Light - CSW30H Series (30mm) Hazardous Duty

WEG Hazardous duty Pilots Devices

are specially engineered for Class 1,

Division 2 and Zone 2.

Wide selection of hermetically sealed

reed and factory sealed contact

block.

An all-polyester construction with

nickel-plated or stainles steel metal

parts for superior corrision

resistance.

Logic Reeds are hermetically sealed,

Providing needed dependability for

harsh environments.

Added Security - Standard Features All Hazardous duty Push Buttons comes standard with

a screw tightening mounting bracket to ensure the contact

blocks remain tight to the operator

Hazardous Duty General Standards

Logic Reeds provide great operation

for low power level ( resistive loads

only ) , especially PLC inputs.

Added Security - Optional Features Rubber Boots add an additional

layer of protection from corrisive chemicals left

behind from hands on operations or

washdown environments.

Certifications

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


CSW30H-B__ __ __Voltage (see Voltage Code)


CSW30H-S D __ __Voltage (see Voltage Code)


Controls


FLUSH

BF0

BF1

BF2

BF3

BF4

BF5

Types

F - Flush


GA - Recessed

GAI - Illuminated Recessed



CSW30H-B E __

Types

G - Twist release

P - Pull release

E-STOP - TWIST RELEASE E-STOP - PUSH PULL

Pilot Lights

SD0

SD1

SD2

SD3

SD4

CSW30H-BEP

$31.00

$86.00 $80.00$107.00

LIST PRICE

LIST PRICELIST PRICELIST PRICECSW30H-BEG

MULTIPLIER SYMBOL FOR CSW30H

SERIES - Z55

PILOT LIGHTS

CSW30H - __

NON-ILLUMINATED (Extended)

$31.00

LIST PRICE

CSW30H - __


$110.00

LIST PRICECSW30H -__ *

CSW30H - __ *

Pushbuttons

CSW30H-BEG2 CSW30H-BEP2

CODE CHART Color Clear/White Red Green Yellow Blue Black

Code 0 1 2 3 4 5

Symbol

LED Block Voltage

E26 24Vac/Vdc

D61 120Vac/Vdc

D66 240Vac/Vdc

* Illuminated operators are supplied with LED block. To

complete selection, replace “*” with desired voltage:

E26 (24Vac/Vdc), D61 (120Vac/Vdc) or D66 (240Vac/Vdc).

BS0

BS1

BS2

BS3

BS4

BS5

ILLUMINATED RECESSED

$115.00

LIST PRICECSW30H -__ *

BGA0

BGA1

BGA2

BGA3

BGA4

RECESSED

$37.00

LIST PRICECSW30H -__

BGA0

BGA1

BGA2

BGA3

BGA4

BGA5


BCI0

BCI1

BCI2

BCI3

BCI4

$120.00

LIST PRICECSW30H - __ *


BC1

BC2

BC5

$42.00

LIST PRICE

CSW30H - __

BSI0

BSI1

BSI2

BSI3

BSI4

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


KNOB LEVER POSITION DIAGRAM

Controls


CSW30H-C __ __ __ __

Angle45 - 45o

90 - 90o


Types

K - Knob

A - Lever

Selector Switches


3 - Three positions

Maintained $44.00


Maintained $44.00



CSW30H-CK2F90

CSW30H-CK2R90

CSW30H-CK3F45

CSW30H-CK3R45

CSW30H-CK3RE45

CSW30H-CK3RD45

CSW30H-CA2F90

CSW30H-CA2R90

CSW30H-CA3F45

CSW30H-CA3R45

CSW30H-CA3RE45

CSW30H-CA3RD45

CSW30H-CY3RE45

CSW30H-CY3RD45

1

1

2 & 3

2 & 3

2 & 3

2 & 3

DIAGRAM 1 - Hermetically & Factory Sealed Block

DIAGRAM 2 - Factory Sealed Block DIAGRAM 3 - Hermetically Sealed Block


Contact

Mouting

Position


Contact

Mouting

Position


Contact

Mouting

PositionI II I 0 II I 0 II

O X NO Either X O ONO & NC Left

X O O NO Left

X O NC Either O X O O O X NO Right

O XNO & NC Either

O O XNO & NC Right

O X X NC Left

X O O X O X X O NC Right

X O X 2NOwired in

parallel

O X O 2NCwired in

series

X O X early make Either

O X X late break Left

X X O late break Right

X = OPEN

O = CLOSED

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls

Pushbutton and Pilot Light - CSW30H Series (30mm) Hazardous DutyFactory Sealed / Hermetically Sealed Contact Blocks

Legend PlatesPlease see selection in 30mm Industrial section of catalog page B-214.

Auxiliary Contact Blocks - Factory Sealed (720VA) Product Decsription

Catalog Number List Price

Multiplier Symbol

Linear devices - 1NO & 1NC BC11FS-CSW30H $120.00 Z55

For rotary devices only - 1NO & 1NC BC11FSR-CSW30H

Auxiliary Contact Blocks - Hermetically Sealed (360VA inductive)Product Decsription

Power reed - 1NO BC10PR-CSW30H $95.00

Z55

Power reed - 1NC BC01PR-CSW30H

Power reed - 2NO BC20PR-CSW30H

$150.00 Power reed - 2NC BC02PR-CSW30H

Power reed - 1NO & 1NC BC11PR-CSW30H

Auxiliary Contact Blocks - Hermetically Sealed (180VA inductive)Product Decsription

Mid-power reed - 1NO BC10MP-CSW30H $75.00

Z55

Mid-power reed - 1NC BC01MP-CSW30H

Mid-power reed - 2NO BC20MP-CSW30H

$130.00 Mid-power reed - 2NC BC02MP-CSW30H

Mid-power reed - 1NO & 1NC BC11MP-CSW30H

Auxiliary Contact Blocks - Hermetically Sealed (40VA inductive / 100W resistive)Product Decsription

Mid-logic reed - 1NO BC10ML-CSW30H $45.00

Z55

Mid-logic reed - 1NC BC01ML-CSW30H

Mid-logic reed - 2NO BC20ML-CSW30H

$70.00 Mid-logic reed - 2NC BC02ML-CSW30H

Mid-logic reed - 1NO & 1NC BC11ML-CSW30H

Auxiliary Contact Blocks - Hermetically Sealed (40W resistive)Product Decsription

Logic reed - 1NO BC10LR-CSW30H $28.00 Z55

Logic reed - 1NC BC01LR-CSW30H

CLAMP RING WRENCH

$30.00

LIST PRICE

CPAW30

30MM HOLE PLUG

$25.00

LIST PRICE

ATR30

Simplifies the tighening or

loosening of polyester and

aluminum 1-3/8” clamp rings.

NEMA 4X rated plug to seal up

unwanted panel holes.

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls


FACTORY SEALED: Contact Blocks are Certified as ”Explosion Proof”. Devices employing this method of protection are designed so that all electrical parts are enclosed in a switch housing that is capable of withstanding, without damage, an explosion of a specified gas or vapor/air mixture which may occur during the operation of the switch. Further, the explosion internal to the switch body is controlled so that the hot gases are extinguished and cooled before they are allowed to escape to the surrounding atmosphere.

HERMETICALLY SEALED: Contact Blocks are Certified as “Non-Incendive”. Devices employing this method of protection are designed so that all electrical parts are a bonded part of the switch housing that forms an arcing chamber that is evacuated of all oxygen, filled with an inert gas, and then sealed to prohibit the exchange of gases with the surrounding environment. These devices are incapable of igniting the surrounding gases or vapor/air mixtures under normal operation. Devices of this type are suitable for use in Div. 2/ Zone 2 applications. Hermetically Sealed contact blocks are also extremely useful for switching low energy circuits or circuits applied in atmospheres containing oxidizing agents and pollutants that might effect the performance of silver switching and metal contact ele-ments. Hermetically Sealed Switch performance is consistent and repeatable in almost any environment.

DIELECTRIC STRENGTH (MECHANICAL CONTACTS) 2200V for 1 Minute

Technical Data

FACTORY SEALED CONTACT BLOCK

Class I Div. 2 Gr. B,C, & D / Zone 2 Gr. IIB +H2

Utilization Category

IEC UL

Make Break Ith-Thermal Rating Rating Current

AC AC-15 A600 7200VA 720VA 10A

DC DC-13 Q300 69VA 69VA 2.5A

NOTE: For AC voltage below 72V AC the max. allowed switching current is 10A = Ith. For DC voltages below 28V DC the max. allowed switching current is 2.5A = Ith. For switching applications below 24V/40mA, Hermetic REED contacts are recommended.

HERMETICALLY SEALED POWER REED CONTACT BLOCK

Class I Div. 2 Gr. A, B, C, & D/Zone 2 Gr. IIC


IEC UL


AC AC-15 B300 3600VA 360VA 5A

AC-15 C600 1800VA 180V 2.5A

DC DC-13 Q300 69VA 69VA 2.5A

NOTE: For AC voltage below 72V AC the max. allowed switching current is 5A = Ith. For DC voltages below 28V DC the max. allowed switching current is 2.5A = Ith. Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).

HERMETICALLY SEALED MID-LOGIC REED CONTACT BLOCK



IEC UL

Inductive

Resistive

Ith-Thermal Current

AC AC-12 250V Max. 40VA 100 Watt 3A

Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).

HERMETICALLY SEALED MID-POWER REED CONTACT BLOCK



IEC UL


AC AC-15 C300 1800VA 180VA 2.5A

DC DC-13 Q150 69VA 69VA 2.5A

NOTE: For AC voltage below 72VAC the max. allowed switching current is 2.5A = Ith. For DC voltages below 28VDC the max. allowed switching current is 2.5A = Ith. Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).

HERMETICALLY SEALED LOGIC REED CONTACT BLOCK



IEC UL

Inductive

Resistive

Ith-Thermal Current

AC 220V Max. N/A 40 Watt 2A

Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).

INDICATING LIGHTS

Light Unit T-Code

FV Incandescent Lights T4A

FV LED Lights T6 [No marking required]

Resistor Lights T3C

Light Unit T-Code

Resistor LED Lights T6

Transformer Lights Incd. & LED T4A

Multi-Voltage 20V-240V LED Light T4A

MATERIALS

Thermoplastic Polyester and Polyester Blends (UV Stabilized for outdoor use) Operator Housings Operator Caps and Handles –

Non-Illuminated (Glass Reinforced Grades)

Mounting Rings and Nuts Thrust Washer Trim WasherHigh Impact Polycarbonate (UV Stabilized for outdoor use) Pilot Light Lens Transparent PB and Mushroom CapsCustom Polymers Certain CAM and Bearing parts are Teflon,

Silicone, & Moly-Disulfide Impregnated for improved wearability

Fluorosilicone and Thermoplastic Neoprene Boot Accessories

Seals Neoprene Gaskets Thermoplastic – Molded Neoprene and alloy

derivitives BUNA N – Rubber – Teflon Coated Thermoplastic – Elastomer Molded Seals Fluorosilicone – BootsMetal: Stainless Steel Push Pull Bushings Internal tubes for Maintained Devices Detents for Maintained Devices Stainless Steel Springs and Screws throughoutAluminum Optional Mounting Nut

ENVIRONMENTAL RATINGS

Type 1, 2, 3, 3R, 4/4X, 12, 13, and IP65

Operating Temperature -40 to +131° F ( -40 to +55° C )

Storage Temperature -40 to +185° F ( -40 to +85° C )

Operating environments below freezing temperatures are assumed to be absent of

freezing liquids or pollutants.

TERMINAL & WIRING CONSIDERATION

Wire- AWG 22-12 CU (Copper Only – Solid & Stranded) [.5 ~ 4 mm2 ] One or Two wires permitted per termination

Recommended Tightening Torque 7 lb-in (+3.0/-0.0 lb-in) — [ .8 Nm ]

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls


MOMENTARY NON-ILLUMINATED H-LINE PUSH BUTTONS

7/16"(11.1mm)

2-3/16"(55.6mm)

9/16" (14.3mm)

Mtg. bracket


1-3/8"(34.9mm)

2-1/8" (54mm)

2"(50.8mm)

1-9/16"(39.7mm)

2-7/16"(61.9mm)

Mtg. bracket

1-5/8"(41.3mm)

Non-Illuminated Operator (shown with Flush Cap & Factory Sealed Contact Block)

1-3/8"(34.9mm)

1-9/16"(39.7mm)

2" (50.8mm)

1-9/16"(39.7mm)

2-1/8"(54mm)

1-5/8"(41.3mm)

2-7/16"(61.9mm)

Mtg. bracket

MOMENTARY 1-1/2” (38MM) MUSHROOM CAP

1-3/8"(34.9mm)

2-1/4"(57.2mm)

2" (50.8mm)

1-9/16"(39.7mm)

Operator Hsg.

2-7/16"(61.9mm)

Mtg. bracket

2-1/8"(54mm)

1-5/8"(41.3mm)Operator

Hsg.

MOMENTARY 2-1/4” (57.2MM) JUMBO MUSHROOM CAP


11/16”(17.5mm)

1-9/16”(39.7mm)

1-11/16”(42.9mm)

MOMENTARY GUARDED

EXTENDED CAP

2-1/4"(57.2mm)

2-1/8"(54mm)

anel Thk.(3/16" (4.8mm) shown)

3-1/8"(79.4mm)

MOMENTARY 2-1/4” (57.2MM) SHROUDED JUMBO MUSHROOM CAP

2” (50.8mm)

2-1/8” (54mm)

2-7/16” (61.9mm)Mounting Bracket

1-5/8” (41.3mm)

Operator Hsg.

1-9/16”(39.7mm)

Operator Hsg.ø1- 7/8"(ø45.2mm)

1- 7/16"(36.5mm)

1- 3/16"(30.2mm)

Momentary 1-1/2” (38mm) Shrouded Mushroom Cap

9/16"(14.3mm)

3/8"(9.5mm)

2-1/8"(54mm)

1-5/8"(41.3mm) Operator

Hsg.

1-9/16"(39.7mm)

Operator Hsg.

2-7/16"(61.9mm)

Mtg. bracket

Momentary Extended Cap

13/16"(20.6mm)

1-1/2"(38.1mm)

2-1/8" (54mm)

2" (50.8mm)

1-9/16"(39.7mm)

Operator Hsg.

2-7/16"(61.9mm)

Mtg. Bracket

1-5/8"(41.3mm)

Operator Hsg.

Momentary Fluorosilicone Rubber Boot

11/16”(17.5mm)

1-9/16”(39.7mm)

1-11/16”(42.9mm)

MOMENTARY GUARDED FLUSH CAP

1-3/16"(30.2mm)

2-1/8"(54mm)

2-3/8"(60.3mm)

9/16"(14.3mm)

NON-ILLUMINATED PUSH BUTTON MOUNTING BRACKET

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls


1-7/16"(36.5mm)Out Dim.

2-1/8" (54mm)

9/16"(14.3mm)

Mtg. Bracket

1-5/8"(41.3mm)

Oper. Hsg.

2" (50.8mm)1-9/16"

(39.7mm) Oper. Hsg.

2-7/16" (61.9mm)Mounting Bracket


2-3/16"(55.6mm)

2-1/4"(57.2mm)

1 3/16"(30.2mm)

In Dim.

2-Position Push-Pull Maintained Operator (shown with 2-1/4” (57.2mm) Jumbo Mushroom Cap)

2-POSITION PUSH-PULL MAINTAINED 1-1/2” (38MM) MUSHROOM CAP

1-7/16"(36.5mm)Out Dim.

1-3/16"(30.2mm)

In Dim.

1-5/8"(41.3mm)

2-7/16"(61.9mm)

Mtg. bracket

2-1/8"(54mm)

1-5/8"(41.3mm) Operator

Hsg.

MAINTAINED NON-ILLUMINATED H-LINE PUSH BUTTONS

1-3/16"(30.2mm)

2-1/8"(54mm)

2-1/4"(57.2mm)

9/16"(14.3mm)

ILLUMINATED PUSH BUTTON MOUNTING BRACKET


Illuminated Transformer and Resistor Operators


7/8"(22.5mm)

2-7/16"(61.9mm)

1-7/16"(36.5mm) 2-1/4"

(57.2mm)

2-1/8"(54mm)

1-3/4"(44.5mm)

2-1/4"(57.2mm)

1-9/16"(39.7mm)

1-1/2"(38.1mm)

2-1/4"(57.2mm)

3-3/16"(80.9mm)11/16"

(17.5mm)

To end of transformer/resistor / dual-input housing


2-1/4"(57.2mm)

2-1/8"(54mm)

1-7/16"(36.5mm)

1-11/16"(42.9mm)

Panel Thk.3/16" (4.8mm)



3-9/16"(90.5mm)1-7/16"

(36.5mm)


1-9/16"(39.7mm)

1-5/8"(41.3mm)

2-1/8"(54mm)

MOMENTARY ILLUMINATED H-LINE PUSH BUTTONS


2-POSITION PUSH-PULL MAINTAINED ILLUMINATED H-LINE PUSH BUTTONS


Illuminated Shrouded Mushroom Lens

1-7/16”

(36.5mm)

ø1-15/16”(ø49.2mm)

1-9/16”(39.7mm)

1-1/2”(39.7mm)

1-3/4”(44.5mm)1-11/16”

(42.9mm)

1-5/8”(41.3mm)

Illuminated Guarded Lens

Illuminated Transformer, Resistor and Dual Input Operators

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls


H-LINE PILOT LIGHTS

FULL VOLTAGE P ILOT L IGHT OPERATOR

1-1/16"(27mm)

3/4"(19.1mm)

1-3/4"(44.5mm)

1-5/8"(41.3mm)


1-1/16"(27mm)

2-3/16"(55.6mm)

1-9/16"(39.7mm)


TRANSFORMER & RESISTOR P ILOT L IGHT OPERATORS

1-1/16"(27mm)

2-3/16"(55.6mm)

1-5/8" (41.3mm) 7/8"(22.5mm)Add'lblocks


DUAL INPUT P ILOT L IGHT OPERATOR

1-3/16"(30.2mm)

2-1/8"(54mm)

2-1/4"(57.2mm)

9/16"(14.3mm)

Illuminated Push-To-Test Mounting Bracket

Multi-Voltage Pilot Light

1-1/16"(27mm)

2-1/16"(52.4mm)

1-9/16"(39.7mm)


1-5/8"(41.3mm)

1-5/8"(41.3mm)

1"(25.4mm)

Fully-assembled operators come standard with one 3/16” (4.8mm) and two 1/16” (1.6mm) gaskets.

MULTI-VOLTAGE H-LINE PILOT LIGHT

PUSH-TO-TEST H-LINE PILOT LIGHTS

Fully-assembled operators come standard with four 1/16” (1.6mm) gaskets.


FULL VOLTAGE PUSH-TO-TEST OPERATOR

2-1/4"(57.2mm)

2-1/8"(54mm)


1-3/16"(30.2mm)

3-1/8"(79.4mm)

Guarded Lens

1-3/4”(44.5mm)1-11/16”

(42.9mm)

1-5/8”(41.3mm)

Shrouded Mushroom Lens

1-7/16”(36.5mm)

1-5/8”(41.3mm)

ø1-15/16”(ø49.2mm”)

1-3/4”(44.5mm)

Transformer & Resistor Push-To-Test Operators

1-1/2"(38.1mm)

3-3/16"(81mm)

2-1/8"(54mm)

1-5/8"(41.3mm)


Hsg.

2-7/16"(61.9mm)

Mtg. bracket

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls


H-LINE SELECTOR SWITCHES

Selector Switch Operator (shown with standard handle)

1-1/8"(28.6mm)

3-1/16"(77.8mm)

9/16" (14.3mm)Mtg. bracket

1-3/8"(34.9mm)


2-7/16"(61.9mm)

Mtg. bracket


Hsg.


Hsg.

2-1/8"(54mm)

Selector Switch Lever Handle

1" (25.4mm) Swing Radius

1-1/8"(28.6mm)

31/32"(787.4mm)

1-3/16"(30.2mm)

2-1/8"(54mm)

2-7/16"(61.9mm)

9/16"(14.3mm)

Selector Switch Mounting Bracket

H-LINE CONTACT BLOCKS

Factory Sealed Contact Block Power Reed, Mid-Power Reed & Medium Logic Reed Contact Blocks

NC contacts

NO contacts

1-15/16"(49.2mm)

1-1/2"(38.1mm)

1-1/8"(28.6mm)

1"(25.4mm)

1-11/16"(42.9mm)

1-11/16"(42.9mm)

1-3/16"(30.2mm)

2-5/16"(58.7mm)

2-13/16"(71.4mm)

13/16"(20.6mm)

LOGIC REED CONTACT BLOCK

7/8"(22.5mm)

1-3/8"(34.9mm)

1-11/16"(42.9mm)

7/8"(22.5mm)

11/16"(17.5mm)

5/16"(7.9mm)

5/16"(7.9mm)


PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls


H-LINE RESET PUSH BUTTON GUARD ATTACHMENT

1-1/2"(38.1mm)

1-3/8"(34.9mm)

MAINTAINED EXTENDED PUSH BUTTON CAP

RESET PUSH BUTTON

1/2"(12.7mm)

Travel

7/16"(11.1mm)

1-3/8"(34.9mm)

MAINTAINED FLUSH & EXTENDED H-LINE PUSH BUTTON CAPS

MAINTAINED FLUSH PUSH BUTTON CAP (SHOWN WITH AN OPERATOR AND CONTACT BLOCK)

1-3/8"(34.9mm)

2-3/16"(55.6mm)

9/16"(14.3mm)

Mtg. Bracket


1-3/8"(34.9mm)

2"(50.8mm)

1-9/16"(39.7mm)

Operator Hsg.

2-7/16"(61.9mm)

Mtg. Bracket

2-1/8"(54mm)


Hsg.


Fully-assembled operators come standard with one 3/16” (4.8mm)

and three 1/16” (1.6mm) gaskets.

LOCK-OFF ATTACHMENT

2-11/16"(68.1mm)

1-21/32”(42mm)

3/16”(4.7mm)

37/64”(14.7mm)

1-15/32”(37.5mm)

5-7/64"(129.8mm)

2-11/16"(68.1mm)

2”(50.9mm)

1-55/64"(47mm)

ø1-7/32”(ø30.7mm)

CAVITYHEIGHT

1-9/16”(39.4mm)

1-15/16”(49.5mm)

1-3/4”(45.2mm)

ø1-3/16”(ø30.5mm)

ø1-15/16”(ø49.5mm)

PDF Compressor Pro



1-800-ASK-4WEG

www.weg.net

PU

SH

BU

TTON

S


Controls

Pushbuttons Stations and Enclosures - CSW Series

- 1EScsw PBS

CSW - Pushbutton Series

1 - 1 Hole Station or Enclosure

2 - 2 Hole Station or Enclosure 3 - 3 Hole Station or Enclosure

PBS - Pushbutton Station

PBE - Pushbutton Enclosure

Blank - 22mm

30 - 30mm

ES - Emergency Stop 40mm

Mushroom Head SS - Start / Stop Pushbutton

SP - Start / Stop / Potentiometer 5k

Blank - Enclosure Only

Fiberglass reinforced polyester construction

Available in 22mm and 30mm versions.

Tongue and Groove type neoprene gasket

Protects from dirt , dust , oil and water (NEMA 4 , 4X and 12)

Comes complete with contact blocks and legend plates on Pre-Assembled Stations.

Empty Enclosure available for 22mm and 30mm Pilots Devices.

PDF Compressor Pro




www.weg.net

PU

SH

BU

TTO

NS


Controls

Pushbuttons Stations and Enclosures - CSW Series

Part Number Description ListMultiplier Symbol

Size ( Inches )

CSW-ES1PBS E-Stop Mushroom -1 N.C.Contact Block and Legend $150.00 Z5 7x4x3

CSW-SS1PBS Start/Stop Combo Button - 1-N.C. and 1-N.O. Contact Blocks $150.00 Z5 7x4x3

CSW-SS2PBS Start/Stop Pushbuttons - 1-N.C. and 1-N.O. Contact Blocks and Legend $175.00 Z5 7x4x3

CSW-SP3PBSStart/Stop Pushbuttons - 1-N.C and 1- N.O. Contact Block , Potentiometer

5k and Legends$460 Z5 9x4x3

CSW30-ES1PBS Same as CSW-ES1PBS - 30mm $260 Z55 7x4x3

CSW30-SS2PBS Same as CSW-SS2PBS - 30mm $240 Z55 7x4x3

CSW30-SP3PBS Same as CSW-SP3PBS - 30mm $535 Z55 9x4x3

Part Number Decsript ListMultiplier Symbol

Size ( Inches )

CSW-1PBE 22mm 1 Hole Enclosure $120.00 Z5 7x4x3



CSW30-1PBE 30mm 1 Hole Enclosure $120.00 Z55 7x4x3



Pushbutton Station

Empty Enclosure

Custom stations available upon request.

PDF Compressor Pro



Pushbuttons and Pilot Lights - Tier1 Automation Automation - Products and Solutions PUSHBUTTONS Data...

Documents

Transcript of Pushbuttons and Pilot Lights - Tier1 Automation Automation - Products and Solutions PUSHBUTTONS Data...