PUSH IN FITTINGS - Air & Hydraulicairhydraulic.ca/wp-content/uploads/push2connect1.pdf ·...

PUSH IN FITTINGS

I , V 300 USA P , M S D , C A , A M , F . T

, V P .

P V . P . W , P .

V . W , , V

, . T V I I , USA. W 75%

' , V .

Vacuforce LLC 933 Western Drive

Indianapolis IN 46241 T 1.866.280.3766 | F 1.866.280.4829www.vacuforce.com | [email protected]

VISIT OUR DISTRIBUTION &

OPERATIONS CENTER

CONTACT YOUR LOCAL VACUFORCE

& PNEUFORCE DISTRIBUTOR

pnfi tcat0315

NPT FITTINGS

1

FITTINGS SPECIFICATIONSOne touch “push in” fi ttings are used to connect pneumatic tubing, such as polyurethane and nylon, to various control valves, cylinders and other associated equipment. The Pneuforce fi tting allows tubing to be connected and reconnected repeatedly without damaging the tube or fi tting. All fi ttings threads are nickel plated brass. NPT and BSPT tapered threads have a pre-coated thread sealant applied for speed and consistency of assembly.

Universal Tri Thread fi ttings and M3, M5, M6 and 10-32UNF are parallel threads and therefore utilize an NBR O Ring seal.

• Fluid Medium Air • Working Pressure 0-150 psi(g) / 10bar(g)• Proof Pressure 450psi(g) / 30bar(g)• Vacuum Duty 29.5”Hg / 14mbar(a)• Working Temperature 32-140ºF / 0-60ºC (high temperature models available upon request)

All Metal Fittings -40-248ºF / -40-120ºC (pg.12)

The Pneuforce NPT fi ttings are suitable for connection of inch size tubing to NPT threads.

TUBE SIZES1/8”

5/32”3/16”1/4”

5/16”3/8”1/2”

THREAD SIZES10-32UNF

1/8”1/4”3/8”1/2”

It should also be noted that 10-32UNF is the same thread form as the metric M5 model.

It should be noted that 5/32” is the same diameter as 4mm and 5/16” is the same diameter as 8mm tubing.

TRI THREAD FITTINGS

2

FITTINGS SPECIFICATIONS

The Pneuforce TRI THREAD fi ttings (designated by -U) have been developed to connect with global fl uid power products. With factories across the world using a mix of NPT (American Standard) and BSP threads, there is some confusion as to what male threads should be used or stocked by fl uid power users. Therefore the universal thread form of the TRI THREAD series has been developed to enable the connection of 1/8, 1/4, 3/8 and 1/2 male threads into the following female thread forms.

NPT, NPSF, BSPP(G), BSPT(R)

Due to the design of this thread form, the time taken to install the Tri Thread fi tting is dramatically decreased. The following procedure should be used when installing TRI THREAD fi ttings. By hand, screw the TRI THREAD fi tting into the female thread until the O ring seal compresses against the face of the component and the metal shoulder of the fi tting makes contact with the component surface. Using a suitably sized wrench, or hex key on straight fi ttings, continue to tighten the fi tting by turning clockwise by a further 1/4 turn. Do not over tighten, as once the O ring is pressed against the mating surface, the seal is airtight. Unlike a tapered thread, the seal is made via an O ring seal which is captive in the TRI THREAD. It is not an interference fi t like that of male and female tapered threads. The TRI THREAD will seal repeatedly and therefore can be used again and again.

INCH TUBE SIZES1/8”

5/32”3/16”1/4”

5/16”3/8”1/2”

METRIC TUBE SIZES4mm (5/32”)

6mm8mm (5/16”)

10mm12mm


National Pipe Taper (NPT)

British Standard Pipe Taper (BSPT) British Standard Pipe Parallel (BSPP)

National Pipe Straight (NPS)

3

THREAD DATAIn the pneumatics industry there are four main types of thread forms in use today. This page highlights the technical data of each which should be understood when applying the push to connect fi ttings shown in this catalogue to applications found in the fi eld.

Referred to as NPT, this American pipe thread is by far the most common thread type used on machinery manufactured and used in North America. This tapered thread seals using a thread sealant or tape. The Pneuforce BSPT male threaded fi ttings have a pre-coated thread sealant which offers speed of connection to female threaded ports as additonal thread sealing tape is not required.

Often referred to as an “R” thread, the BSPT Thread is the standard for pipe thread across the world except for countries in North America which use NPT. BSPT is a tapered thread and is used in male threaded components for connection to female BSPT and BSPP thread forms. Using a BSPT male with BSPT female threads is the preferred method which offers a full tapered seal but are often used to attach to female BSPP threads. BSPT threads require a thread sealant to seal. The Pneuforce BSPT male threaded fi ttings have a pre-coated thread sealant which offers speed of connection to female threaded ports as additonal thread sealing tape is not required.

The NPS thread has the same fundamental characteristics as NPT except that it is a parallel thread. NPSF (National Pipe Straight Fuel) is used for female threads in fuel line connections but in the pneumatics industry it is often used in component bodies made of plastic where a tapered thread could split the component body as the fi tting is tightened.

Often referred to as a “G “ thread, the BSPP thread form is by far the most popular female thread for pneumatic components except in North America where NPT is the standard. A parallel thread, the male fi ttings seal with an O ring ensuring an air tight seal and with multiple connections such as a manifold, this sealing method ensures a common fi tting height. A further advantage is that the male fi tting can be used repeatedly without the need for reapplying thread sealant. Male G threads cannot be connected to female BSPT thread ports.

Thread Taper AngleThread Angle

Thread Crest & Root


Thread Crest & Root


Thread Crest & Root


Thread Crest & Root

1° 47’60°Flat

0° 60°Flat

1° 47’55°Radius

0° 55°Radius

1/8NPT 1/4NPT 3/8NPT 1/2NPT

TPI 27 18 18 14

Major Ø (mm) 10.3 13.7 17.1 21.3

Pitch (mm) 0.94 1.41 1.41 1.81

1/8BSP 1/4BSP 3/8BSP 1/2BSP

TPI 28 19 19 14

Major Ø (mm) 9.7 13.2 16.6 20.9

Pitch (mm) 0.91 1.34 1.34 1.81

4

PART NUMBER NOMENCLATURE

JSCJSUPB PCPCFPD PE PEGPG PGJPH PHFPIGPIJPL PLFPLGJPLHPLJPLLPM PMFPOCPP PU PV PW PWJPX PY PYJPZA

ALL METAL FITTING

(pg 12)

90° Flow ControlInline Flow ControlBranch TeeStraight Male StudFemale ConnectorRun TeeUnion TeeReducing Tee UnionReducing Straight UnionPlug in ReducerUniversal ElbowUniversal Female ElbowReducing NippleNippleMale ElbowFemale ElbowPlug In Reducing ElbowMale 45º ElbowPlug In ElbowExtended Male ElbowBulkhead UnionFemale BulkheadMale Round ConnectorPlugStraight UnionUnion ElbowReducing Union YPlug In Reducing ElbowBranch YUnion YPlug In YUnion Cross

PCB N11/4

1/85/321/4

5/163/81/2

4mm6mm8mm

10mm12mm

UM5N1N2N3N4

U01U02U03U04

SCTUBE SIZE

10-32UNF (M5)*M5

1/8NPT1/4NPT3/8NPT1/2NPT

1/8 Universal1/4 Universal3/8 Universal1/2 Universal

THREAD SIZE

-

*10-32UNF is interchangable with an M5 metric thread


Part NumberPC1/8-UPC1/8-N1PC5/32-UPC5/32-N1PC5/32-N2PC3/16-UPC3/16-N1PC3/16-N2PC3/16-N3PC1/4-UPC1/4-N1PC1/4-N2PC1/4-N3PC5/16-N1PC5/16-N2PC5/16-N3PC3/8-N1PC3/8-N2PC3/8-N3PC3/8-N4PC1/2-N2PC1/2-N3PC1/2-N4

Part NumberPL1/8-UPL1/8-N1PL5/32-UPL5/32-N1PL5/32-N2PL3/16-UPL3/16-N1PL3/16-N2PL3/16-N3PL1/4-UPL1/4-N1PL1/4-N2PL1/4-N3PL5/16-N1PL5/16-N2PL5/16-N3PL3/8-N1PL3/8-N2PL3/8-N3PL3/8-N4PL1/2-N2PL1/2-N3PL1/2-N4

Part NumberPLL1/8-UPLL1/8-N1PLL5/32-UPLL5/32-N1PLL3/16-N1PLL3/16-N2PLL3/16-N3PLL1/4-N1PLL1/4-N2PLL1/4-N3PLL5/16-N1PLL5/16-N2PLL5/16-N3PLL3/8-N2PLL3/8-N3PLL3/8-N4PLL1/2-N2PLL1/2-N3PLL1/2-N4

Part NumberPLH1/8-UPLH1/8-N1PLH5/32-UPLH5/32-N1PLH5/32-N2PLH3/16-UPLH3/16-N1PLH3/16-N2PLH3/16-N3PLH1/4-UPLH1/4-N1PLH1/4-N2PLH1/4-N3PLH5/16-N1PLH5/16-N2PLH5/16-N3PLH3/8-N1PLH3/8-N2PLH3/8-N3PLH3/8-N4PLH1/2-N2PLH1/2-N3PLH1/2-N4

Part NumberPOC5/32-UPOC5/32-N1POC1/8-UPOC1/8-N1POC1/4-UPOC1/4-N1POC1/4-N2POC5/16-N1POC5/16-N2POC5/16-N3POC3/8-N3POC3/8-N4POC1/2-N3POC1/2-N4

Part NumberPCF1/8-UPCF1/8-N1PCF5/32-N1PCF5/32-N2PCF3/16-N1PCF3/16-N2PCF1/4-N1PCF1/4-N2PCF5/16-N1PCF5/16-N2PCF5/16-N3PCF3/8-N2PCF3/8-N3PCF1/2-N2PCF1/2-N3

PC MALE STRAIGHT

PL MALE ELBOW PLH 45O ELBOW

POC ROUND STRAIGHT PCF FEMALE STRAIGHT

PLL EXTENDED ELBOW

5

For Technical Details Including Dimensions Visit www.pneuforce.com

For 4mm and 8mm tube use 5/32 & 5/16 sizes respectively

NPT THREAD FITTINGS

Part NumberPLF1/8-UPLF5/32-N1PLF3/16-N1PLF3/16-N2PLF1/4-N1PLF1/4-N2PLF5/16-N1PLF5/16-N2PLF5/16-N3PLF3/8-N2PLF3/8-N3PLF1/2-N3PLF1/2-N4

Part NumberPB1/8-UPB1/8-N1PB5/32-UPB5/32-N1PB5/32-N2PB3/16-UPB3/16-N1PB3/16-N2PB3/16-N3PB1/4-UPB1/4-N1PB1/4-N2PB1/4-N3PB5/16-N1PB5/16-N2PB5/16-N3PB3/8-N1PB3/8-N2PB3/8-N3PB3/8-N4PB1/2-N2PB1/2-N3PB1/2-N4

Part NumberPD1/8-UPD1/8-N1PD5/32-UPD5/32-N1PD5/32-N2PD3/16-UPD3/16-N1PD3/16-N2PD3/16-N3PD1/4-UPD1/4-N1PD1/4-N2PD1/4-N3PD5/16-N1PD5/16-N2PD5/16-N3PD3/8-N1PD3/8-N2PD3/8-N3PD3/8-N4PD1/2-N2PD1/2-N3PD1/2-N4

Part NumberPX1/8-UPX1/8-N1PX5/32-UPX3/16-UPX5/32-N1PX5/32-N2PX3/16-N1PX3/16-N2PX3/16-N3PX1/4-UPX1/4-N1PX1/4-N2PX1/4-N3PX5/16-N1PX5/16-N2PX5/16-N3PX3/8-N1PX3/8-N2PX3/8-N3PX3/8-N4PX1/2-N2PX1/2-N3PX1/2-N4

Part NumberPH1/8-UPH1/8-N1PH5/32-UPH5/32-N1PH3/16-UPH3/16-N1PH3/16-N2PH1/4-N1PH1/4-N2PH5/16-N1PH5/16-N2PH5/16-N3PH3/8-N2PH3/8-N3PH1/2-N3PH1/2-N4

Part NumberPMF5/32-N1PMF3/16-N2PMF1/4-N1PMF1/4-N2PMF5/16-N1PMF5/16-N2PMF5/16-N3PMF3/8-N2PMF3/8-N3PMF1/2-N3PMF1/2-N4

Part NumberPHF1/8-UPHF1/8-N1PHF5/32-UPHF5/32-N1PHF3/16-UPHF3/16-N1PHF3/16-N2PHF1/4-N1PHF1/4-N2PHF5/16-N1PHF5/16-N2PHF5/16-N3PHF3/8-N2PHF3/8-N3PHF1/2-N3PHF1/2-N4

Part NumberPKD3/16-5/32-N1PKD1/4-5/32-N1PKD5/16-1/4-N2PKD5/16-3/16-N2PKD5/16-5/32-N2PKD3/8-5/16-N3

PLF FEMALE ELBOW

PX BRANCH Y

PB BRANCH TEE

PH MALE ELBOW

PMF BULKHEAD

PD RUN TEE

PHF FEMALE ELBOW

PKD MANIFOLD

6



NPT THREAD FITTINGS

PL MALE ELBOWPart NumberPC1/8-UPC1/8-U01PC5/32-UPC5/32-U01PC5/32-U02PC1/4-UPC1/4-U01PC1/4-U02PC1/4-U03PC5/16-U01PC5/16-U02PC5/16-U03PC3/8-U01PC3/8-U02PC3/8-U03PC3/8-U04PC1/2-U02PC1/2-U03PC1/2-U04PC06-M5PC06-U01PC06-U02PC06-U03PC10-U01PC10-U02PC10-U03PC10-U04PC12-U02PC12-U03PC12-U04

Part NumberPB1/8-UPB1/8-U01PB5/32-UPB5/32-U01PB5/32-U02PB1/4-UPB1/4-U01PB1/4-U02PB1/4-U03PB5/16-U01PB5/16-U02PB5/16-U03PB3/8-U01PB3/8-U02PB3/8-U03PB3/8-U04PB1/2-U02PB1/2-U03PB1/2-U04PB06-M5PB06-U01PB06-U02PB06-U03PB10-U01PB10-U02PB10-U03PB10-U04PB12-U02PB12-U03PB12-U04

Part NumberPD1/8-UPD1/8-U01PD5/32-UPD5/32-U01PD5/32-U02PD1/4-UPD1/4-U01PD1/4-U02PD1/4-U03PD5/16-U01PD5/16-U02PD5/16-U03PD3/8-U01PD3/8-U02PD3/8-U03PD3/8-U04PD1/2-U02PD1/2-U03PD1/2-U04PD06-M5PD06-U01PD06-U02PD06-U03PD10-U01PD10-U02PD10-U03PD10-U04PD12-U02PD12-U03PD12-U04

Part NumberPX1/8-UPX1/8-U01PX5/32-UPX5/32-U01PX5/32-U02PX1/4-UPX1/4-U01PX1/4-U02PX1/4-U03PX5/16-U01PX5/16-U02PX5/16-U03PX3/8-U01PX3/8-U02PX3/8-U03PX3/8-U04PX1/2-U02PX1/2-U03PX1/2-U04PX06-M5PX06-U01PX06-U02PX06-U03PX10-U01PX10-U02PX10-U03PX10-U04PX12-U02PX12-U03PX12-U04

Part NumberPL1/8-UPL1/8-U01PL5/32-UPL5/32-U01PL5/32-U02PL1/4-UPL1/4-U01PL1/4-U02PL1/4-U03PL5/16-U01PL5/16-U02PL5/16-U03PL3/8-U01PL3/8-U02PL3/8-U03PL3/8-U04PL1/2-U02PL1/2-U03PL1/2-U04PL06-M5PL06-U01PL06-U02PL06-U03PL10-U01PL10-U02PL10-U03PL10-U04PL12-U02PL12-U03PL12-U04

Part NumberPLL1/8-UPLL1/8-U01PLL5/32-UPLL5/32-U01PLL5/32-U02PLL1/4-UPLL1/4-U01PLL1/4-U02PLL1/4-U03PLL5/16-U01PLL5/16-U02PLL5/16-U03PLL3/8-U01PLL3/8-U02PLL3/8-U03PLL3/8-U04PLL1/2-U02PLL1/2-U03PLL1/2-U04PLL06-M5PLL06-U01PLL06-U02PLL06-U03PLL10-U01PLL10-U02PLL10-U03PLL10-U04PLL12-U02PLL12-U03PLL12-U04

PC MALE STUDP t N b

PLL EXTENDED ELBOW

PP t Nt N bbPB BRANCH TEE PD RUN TEE PX BRANCH Y

7For Technical Details Including Dimensions Visit www.pneuforce.com For 4mm and 8mm tube use 5/32 & 5/16 sizes respectively

UNIVERSAL THREAD FITTINGS

Part NumberPOC04-M5POC04-M6POC04-01POC04-02POC06-M5POC06-M6POC06-01POC06-02POC06-03POC08-01POC08-02POC08-03POC08-04POC10-01POC10-02POC10-03POC10-04POC12-02POC12-03POC12-04

Part NumberPCF04-01PCF04-02PCF06-01PCF06-02PCF06-03PCF08-01PCF08-02PCF08-03PCF08-04PCF10-01PCF10-02PCF10-03PCF10-04PCF12-02PCF12-03PCF12-04

Part NumberPH04-M5PH04-G01PH06-M5PH06-G01PH06-G02PH08-G01PH08-G02PH08-G03PH10-G02PH10-G03PH12-G03PH12-G04

Part NumberPHF04-M5PHF04-G01PHF06-M5PHF06-G01PHF06-G02PHF08-G01PHF08-G02PHF08-G03PHF10-G02PHF10-G03PHF12-G03PHF12-G04

Part NumberPLH04-M5PLH04-G01PLH04-G02PLH06-M5PLH06-G01PLH06-G02PLH06-G03PLH06-G04PLH08-G01PLH08-G02PLH08-G03PLH08-G04PLH10-G01PLH10-G02PLH10-G03PLH10-G04PLH12-G02PLH12-G03PLH12-G04

Part NumberPKD06-04-G01PKD08-04-G02PKD08-06-G02PKD10-08-G03

Part NumberPLF04-M5PLF04-M6PLF04-G01PLF04-G02PLF06-M5PLF06-M6PLF06-G01PLF06-G02PLF06-G03PLF08-G01PLF08-G02PLF08-G03PLF08-G04PLF10-G01PLF10-G02PLF10-G03PLF10-G04PLF12-G02PLF12-G03PLF12-G04

Part NumberPMF04-G01PMF04-G02PMF06-G01PMF06-G02PMF06-G03PMF08-G01PMF08-G02PMF08-G03PMF08-G04PMF10-G01PMF10-G02PMF10-G03PMF10-G04PMF12-G02PMF12-G03PMF12-G04

P t N b P t N b P N b

POC ROUND STRAIGHT

PH MALE ELBOW

PCF FEMALE STRAIGHT

PHF FEMALE ELBOW

PMF BULKHEAD

PLF FEMALE ELBOW

PLH 45O ELBOW PKD MANIFOLD


8


BSPP(G) & BSPT(R) FITTINGS

Part NumberPM1/8PM5/32PM3/16PM1/4PM5/16PM3/8PM1/2

PM04PM06PM08PM10PM12

Part NumberPU1/8PU5/32PU3/16PU1/4PU5/16PU3/8PU1/2

PU04PU06PU08PU10PU12PU16

Part NumberPV1/8PV5/32PV3/16PV1/4PV5/16PV3/8PV1/2

PV04PV06PV08PV10PV12PV16

Part NumberPY1/8PY5/32PY3/16PY1/4PY5/16PY3/8PY1/2

PY04PY06PY08PY10PY12PY16

Part NumberPE1/8PE5/32PE3/16PE1/4PE5/16PE3/8PE1/2

PE04PE06PE08PE10PE12PE16

Part NumberPEG1/4-1/8PEG1/4-5/32PEG5/16-5/32PEG5/16-1/4PEG3/8-5/16PEG1/2-3/8

PEG06-04PEG08-04PEG08-06PEG10-08PEG12-10

Part NumberPG5/32-1/8PG3/16-5/32PG1/4-5/32PG1/4-3/16PG5/16-1/4PG3/8-5/16PG1/2-3/8

PG06-04PG08-06PG10-08PG12-10PG16-12

Part NumberPW5/32-1/8PW3/16-5/32PW1/4-5/32PW1/4-3/16PW5/16-1/4PW3/8-1/4PW3/8-5/16PW1/2-3/8

PW06-04PW08-06PW10-08PW12-10

Part NumberPZA1/8PZA5/32PZA3/16PZA1/4PZA5/16PZA3/8PZA1/2

PZA04PZA06PZA08PZA10PZA12PZA16

PM BULKHEAD

PE UNION TEE

PEG REDUCING TEE

PU UNION STRAIGHT

PY UNION Y

PW REDUCING Y

PV UNION ELBOW

PG REDUCING UNION

PZA UNION CROSS

9



INCH & MM TUBE FITTINGS

The PLGJ Stem is the Larger Size

The PGJ Stem is the Larger Size

The PIJ Hollow Nipple Is Used to Connect two Fittings Directly Together

Part NumberPP5/32PP3/16PP1/4PP5/16PP3/8PP1/2

PP04PP06PP08PP10PP12PP16

Part NumberPGJ1/4-5/32PGJ5/16-5/32PGJ5/16-1/4PGJ3/8-1/4PGJ3/8-5/16PGJ1/2-1/4PGJ1/2-5/16PGJ1/2-3/8

PGJ06-04PGJ08-04PGJ08-06PGJ10-06PGJ10-08PGJ12-06PGJ12-08PGJ12-10

Part NumberPLGJ5/32-1/8PLGJ3/16-5/32PLGJ1/4-5/32PLGJ1/4-3/16PLGJ5/16-1/4PLGJ3/8-5/16PLGJ1/2-3/8

PLGJ06-04PLGJ08-06PLGJ10-08PLGJ12-10

Part NumberPWJ5/32-1/8PWJ1/4-5/32PWJ5/16-1/4PWJ3/8-5/16PWJ1/2-3/8

PWJ06-04PWJ08-06PWJ10-08PWJ12-10

Part NumberPIJ5/32PIJ3/16PIJ1/4PIJ5/16PIJ3/8PIJ1/2

PIJ04PIJ06PIJ08PIJ10PIJ12PIJ16

Part NumberPIJ5/32PIJ3/16PIJ1/4PIJ5/16PIJ3/8PIJ1/2

PIJ04PIJ06PIJ08PIJ10PIJ12PIJ16

Part NumberPLJ1/8PLJ5/32PLJ3/16PLJ1/4PLJ5/16PLJ3/8PLJ1/2

PLJ04PLJ06PLJ08PLJ10PLJ12

Part NumberPIG3/16-5/32PIG1/4-5/32PIG1/4-3/16PIG5/16-5/32PIG5/16-1/4PIG3/8-5/16PIG1/2-3/8

PIG06-04PIG08-04PIG08-06PIG10-06PIG10-08

PIG REDUCING NIPPLE

PYJ PLUG IN Y

PIJ NIPPLE

PLJ PLUG IN ELBOW

PWJ REDUCING Y

PP PLUG

PGJ PLUG IN REDUCER

PLGJ REDUCING ELBOW

10



INCH & MM TUBE FITTINGS

PK MANIFOLD

JSC FLOW CONTROL INCH TUBE TO NPT

JSC FLOW CONTROL MM TUBE TO BSPT

JSU FLOW CONTROL MM & INCH TUBING

NASC FLOW CONTROL NPT THREADS

JSC FLOW CONTROL MM TUBE TO BSPP

Part Number Port SizeNASC-06 1/8NPTNASC-08 1/4NPTNASC-10 3/8NPTNASC-15 1/2NPT

PKJ MANIFOLDPKG MANIFOLD

The PK Manifold Has All Equal Size Ports The PKG Manifold Has Supply Ports of Equal Size & Three Reduced Side Ports

The PKJ Manifold Has a Stem & Opposite Tube Port of Equal Size & Three Reduced Side Ports

Part NumberPK5/32PK3/16PK1/4PK5/16

PK04PK06PK08

Part NumberJSU1/8JSU5/32JSU3/16JSU1/4JSU5/16JSU3/8JSU1/2

JSU04JSU06JSU08JSU10JSU12

Part NumberPKG3/16-5/32PKG1/4-5/32PKG5/16-5/32PKG5/16-1/4PKG3/8-1/4PKG3/8-5/16

PKG06-04PKG08-06PKG10-06PKG10-08PKG12-10

Part NumberJSC1/8-UJSC1/8-N1JSC5/32-UJSC5/32-N1JSC3/16-UJSC3/16-N1JSC3/16-N2JSC3/16-N3JSC1/4-UJSC1/4-N1JSC1/4-N2JSC1/4-N3JSC5/16-N1JSC5/16-N2JSC5/16-N3JSC3/8-N2JSC3/8-N3JSC3/8-N4JSC1/2-N3JSC1/2-N4

Part NumberJSC04-01JSC04-02JSC06-01JSC06-02JSC06-03JSC06-04JSC08-01JSC08-02JSC08-03JSC08-04JSC10-01JSC10-02JSC10-03JSC10-04JSC12-02JSC12-03JSC12-04

Part NumberJSC04-M5JSC04-M6JSC04-G01JSC06-M5JSC06-M6JSC06-G01JSC06-G02JSC06-G03JSC06-G04JSC08-G01JSC04-G02JSC08-G02JSC08-G03JSC08-G04JSC10-G01JSC10-G02JSC10-G03JSC10-G04JSC12-G02JSC12-G03JSC12-G04

Part NumberPKJ3/16-5/32PKJ1/4-5/32PKJ5/16-5/32PKJ5/16-1/4PKJ3/8-1/4PKJ3/8-5/16

PKJ06-04PKJ08-04PKJ08-06PKJ10-06PKJ10-08

11



MANIFOLDS & FLOW CONTROLS

MANIFOLDS

FLOW CONTROLS

Part NumberBPC1/4-U01BPC1/4-U02BPC5/16-U01BPC5/16-U02BPC3/8-U02BPC3/8-U03

BPC06-U01BPC06-U02BPC10-U02BPC10-U03

Part NumberBPL1/4-U01BPL1/4-U02BPL5/16-U01BPL5/16-U02BPL3/8-U02BPL3/8-U03

BPL06-U01BPL06-U02BPL10-U02BPL10-U03

Part NumberBPB1/4-U01BPB1/4-U02BPB5/16-U01BPB5/16-U02BPB3/8-U02BPB3/8-U03

BPB06-U01BPB06-U02BPB10-U02BPB10-U03

Part NumberBPD1/4-U01BPD1/4-U02BPD5/16-U01BPD5/16-U02BPD3/8-U02BPD3/8-U03

BPD06-U01BPD06-U02BPD10-U02BPD10-U03

Part NumberBPE1/4BPE5/16BPE3/8

BPE06BPE10

Part NumberBPU1/4BPU5/16BPU3/8

BPU06BPU10

Part NumberBPV1/4BPV5/16BPV3/8

BPV06BPV10

Part NumberBPY1/4BPY5/16BPY3/8

BPY06BPY10

BPBPC5BPCB

BPC MALE STUD

BPD RUN TEE

BPB BRANCH TEE

BPE UNION TEE

BPY UNION TEE

BPL ELBOW

BPU UNION

BPV UNION ELBOW

12



ALL METAL FITTINGS

The Pneuforce brass nickel plated push to connect fi ttings have been developed for use in harsh environments and applications.

Designed for low and high temperature operation these fi ttings exceed all normal criteria expected of a standard push to connect fi tting.

The unique Pneuforce universal threads enable connection to all female BSPP, BSPT, NPT and NPSF threads.

SPECIFICATIONSMinimum Operating Temperature -40ºC / -40ºFMaximum Operating Temperature +120ºC / +248ºFMinimum Operating Pressure 29”Hg (vacuum)Maximum Operating Pressure 12bar(g) / 176psi(g)

PC-C MALE STUD POC-C ROUND STUD

PD-C RUN TEE

JSC-C FLOW CONTROLPCF-C FEMALE STUD

PB-C BRANCH TEE

PU-C UNION

PM-C UNION

PE-C UNION ELBOW PY-C UNION Y

PL-C ELBOW

PLL-C ELBOW

Part NumberPC03-M3CPC03-M6CPC03-M5CPC04-01CPC04-M3CPC04-M6CPC04-M5CPC06-01CPC06-M6CPC06-M5CPC1/4-01CPC1/4-UC

Part NumberPLL03-M3CPLL03-M6CPLL03-M5CPLL04-01CPLL04-M3CPLL04-M6CPLL04-M5CPLL06-01CPLL06-M6CPLL06-M5CPLL1/4-01CPLL1/4-UC

Part NumberPOC03-M3CPOC03-M6CPOC03-M5CPOC04-01CPOC04-M3CPOC04-M6CPOC04-M5CPOC06-01CPOC06-M6CPOC06-M5CPOC1/4-01CPOC1/4-UC

Part NumberPB03-M3CPB03-M6CPB03-M5CPB04-01CPB04-M3CPB04-M6CPB04-M5CPB06-01CPB06-M6CPB06-M5CPB1/4-01CPB1/4-UC

Part NumberPL03-M3CPL03-M6CPL03-M5CPL04-01CPL04-M3CPL04-M6CPL04-M5CPL06-01CPL06-M6CPL06-M5CPL1/4-01CPL1/4-UC

Part NumberPD03-M3CPD03-M6CPD03-M5CPD04-01CPD04-M3CPD04-M6CPD04-M5CPD06-01CPD06-M6CPD06-M5CPD1/4-01CPD1/4-UC

Part NumberPU03CPU04CPU06CPU1/4C

Part NumberPE03CPE04CPE06CPE1/4C

Part NumberJSC03-M3CJSC03-M6CJSC03-M5CJSC04-01CJSC04-M3CJSC04-M6CJSC04-M5CJSC06-01CJSC06-M6CJSC06-M5CJSC1/4-01CJSC1/4-UC

Part NumberPM03CPM04CPM06CPM1/4C

Part NumberPY03CPY04CPY06CPY1/4C

Part NumberPCF03-M3CPCF03-M6CPCF03-M5CPCF04-01CPCF04-M3CPCF04-M6CPCF04-M5CPCF06-01CPCF06-M6CPCF06-M5CPCF1/4-01CPCF1/4-UC

13For Technical Details Including Dimensions Visit www.pneuforce.comFor 5/32 size Tubing use 4mm Which is the Same Size

Pneuforce Compact or Miniature push to connect fi ttings for use with micro pneumatics such as mini control valves, toggle switches and other smaller pneumatic devices.

Very popular for use inside control panels where space is at a premium, these fi ttings offer an extremely compact solution for tube connection between components. Available in both inch and metric tube sizes with thread sizes from M3 through to 1/8 pipe threads.

MINIATURE / COMPACT FITTINGS

FRL Assemblies & Components• Air Filters• Pressure Regulators• Airline Lubricators• Inline Mini Regulators• Safety Lock Out Valves

Switches & Sensors• Solid State Sensors• PNP & NPN Models• Carbon Steel Case Gauges• Stainless Steel Gauges

Electrical Connectors• DIN43650 Solenoid Connectors• Form A, Form B, Form C & D• Molded DIN Connectors• M8 Straight and 90º Connectors• M12 Straight and 90º Connectors• Solenoid Valve Timers

Control Valves• Poppet Valves• Pilot Operated Spool Valves• Solenoid Spool Valves• Valve Manifolds• 2/2, 3/2, 5/2 & 5/3 confi gurations• From 10-32UNF to 2NPT

Muffl ers & Silencers• Plastic Silencers• Aluminum Silencers• Brass Breather Vents• Brass Exhaust Muffl ers• Silencers with Flow Control

Manual & Automatic Valves• Hand Valves• Directional Valves• Foot Pedal Valves• Quick Exhaust Valves• Shuttle Valves• Check Valves• Precision Flow Controls

Pneuforce offers a complete line of pneumatic automation equipment such as the types highlighted below. Pneuforce specializes in supplying industrial distributors high quality, cost competitive products from around the world enabling industrial distributors to compete in today’s global market.

Pneuforce also offers custom manufacturing of mechanical components. Please contact us with your inquiry.

PUSH IN FITTINGS - Air & Hydraulicairhydraulic.ca/wp-content/uploads/push2connect1.pdf ·...

Documents

Transcript of PUSH IN FITTINGS - Air & Hydraulicairhydraulic.ca/wp-content/uploads/push2connect1.pdf ·...