Pure sine wave inverter is one of the most advanced DC to ...
Transcript of Pure sine wave inverter is one of the most advanced DC to ...
www.lgis.cc 2
CCoommppaannyy pprrooffiillee
Yueqing Sandi Electric Co., Ltd specialized in the new energy source and electrical
source scientific research, development, manufacture and service had surpasses for 15 years
of electrical source field; which recognized by widely customers according to entirely varieties,
high quality and service first. At present, the researched products by our company basically
contain the best product at home and abroad, which delegated the top level of electrical source
manufacture all over the world. The main products are: PV Grid-Connected Inverter, Off-grid
Pure sine wave inverter, PV Solar Pumping Inverter, PV Combiner box, Solar charge controller
and Wind-Solar Hybrid Controller and other renewable energy products. The products of
company are widely applied in new energy source, civilian use, mountain area, construction,
industrial equipment, communication system, islands and other areas without electricity use.
SANDI Electric Company insist on technology as forerunner, keep long-term, good research
cooperation with all universities; fetch in and absorb international advanced technology, built
strictly quality control system.
We will take the work objective of “unremitting exploration, endeavor and innovation,
honesty and dedication, perfect and practicality” and quality guideline of “criterion management,
intensive manufacture, quality first, service with all hearts”. Seek excellence, value innovation!
We will ceaselessly struggle and create refulgence with you together.
QQuuaalliiffiiccaattiioonn cceerrttiiffiiccaattee
www.lgis.cc 4
Off-Grid Pure Sine Wave Inverter
Our SDP series Off Grid Pure sine wave inverter is one of the most advanced DC
to AC conversion products in the world, it is suitable use for areas without
electricity, vehicles, ships, solar energy, wind turbine and other renewable energy
systems and etc, can supply power and provide guarantee effectively for the areas
with traffic inconveniences, in the mountains, pastoral, border, island and other
areas without electricity. It has the main advantages of high quality sine wave AC
output, microcomputer control, humanness design, and it is high efficiency and low
no-load loss, and no pollution. The inverter can also supply AC power to all kinds of
electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights,
televisions, electric fans and other industrial power supply.
Technical Features:
Using the IPM intelligent Power Module from Mitsubishi, improve the system efficiency
higher
Intelligentized, modularized, simple structure design with powerful function.
Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers
can set start mode according to the type of their load.
The output frequency 50HZ and 60HZ can be setting via LCD panel.
The output voltage can be set between -40% to +20% of rated voltage.
The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage
recovery point, under-voltage recovery point all can be setting via the LCD panel.
Pure sine wave output. With good dynamic response less than 50MS, waveform distortion
rate smaller, higher conversion efficiency and stable output voltage.
Low Frequency Transformer, which ensures that inverter has high efficiency.
www.lgis.cc 5
Wide input voltage can be set according to customer’s requirement. Input voltage range can
be selected from 100-500V or 200-850V.
AC busbar and DC busbar are completely isolated to avoid interference between AC and DC
High conversion efficiency, Max. Efficiency≥96%
Adopts black pure aluminum radiator, which confirms the best radiating performance.
LCD display, powerful data display and fault instruction function.
European CE (EMC, LVD) Certificate and accredited by Australian CEC, ERAC energy
network.
PPVV OOffff--ggrriidd SSoollaarr PPoowweerr SSyysstteemm
PV Off-grid Solar power generation system including solar panel array, solar charge controller,
storage battery, Off-grid inverter, etc. In the sunshine, the solar panel convert the solar energy to
DC power and charge the battery group by the charge controller. Then the off grid inverter
convert the DC power into AC power for power supply the AC load.
SSyysstteemm SScchheemmaattiicc
www.lgis.cc 6
Technical Parameters:
Model SDP-1000W SDP-1500W
Isolation mode Low Frequency Transformer
DC Input Input rated voltage(VDC) 12V 24V 24V 48V
Input rated current(A) 83A 42A 62.5A 31A
AC Output
Rated AC output power 1000W 1500W
AC output waveform Pure sine wave
Phases Single phase 2 wire and ground
Output rated voltage 220Vac±3%
Output voltage range 110/120/220/230/240Vac optional
Output Frequency 50Hz or 60Hz ±0.5Hz
Power Factor(PF) 0.8
Overload Ability 150%, 10s
Inverter efficiency ≥85%
Total Harmonic Distortion (THD) ≤3%
Display LCD
Ambient temperature 0~+40℃
Using environment humidity 0~90%,No condensation
Protection
Overload
Overload exceeds 110%, automatic shutdown in 30
secs;Overload exceeds 120%,automatic shutdown
in 2 secs;Under mains supply mode, it will not
shutdown if overload, just keeping sound.
Short-circuit Output short-circuit, automatic shutdown after
keeping sound 20 secs
Battery high and low voltage protection
Cooling method Fan-cooled
Working
environment
Noise <55dB
Degree of protection IP20(indoor)
Using altitude(m) ≤1000
Dimension (W×D×H) mm 420×145×215mm 405×180×320mm
Weight (Kg) 13Kg 17Kg
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 7
Model SDP-2000W SDP-3000W
Isolation mode Low Frequency Transformer
DC Input Input rated voltage(VDC) 48V
Input rated current(A) 42A 62.5A
AC Output
Rated AC output power 2000W 3000W
AC output waveform Pure sine wave
Phases Single phase 2 wire and ground
Output rated voltage 220Vac±3%
Output rated current 9.1A 13.6A
Output voltage range 110/120/220/230/240Vac optional
Output Frequency 50Hz or 60Hz ±0.5Hz
Power Factor(PF) 0.8
Overload Ability 150%, 10s
Inverter efficiency (80% resistive
load) ≥85%
Total Harmonic Distortion (THD) ≤3%
Display LCD
Ambient temperature 0~+40℃
Using environment humidity 0~90%,No condensation
Protection
Overload
Overload exceeds 110%, automatic shutdown in 30
secs;Overload exceeds 120%,automatic shutdown
in 2 secs;Under mains supply mode, it will not
shutdown if overload, just keeping sound.
Short-circuit Output short-circuit, automatic shutdown after
keeping sound 20 secs
Battery high and low voltage protection
Cooling method Fan-cooled
Working
environment
Noise <55dB
Degree of protection IP20(indoor)
Using altitude(m) ≤1000
Dimension (W×D×H) mm 405×180×320 425×200×335
Weight (Kg) 20Kg 28Kg
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 8
Model SDP-4000W SDP-5000W
Isolation mode Low Frequency Transformer
DC Input Input rated voltage (Vdc) 96V 120V 96V 120V
Input rated current(A) 42A 33A 52A 42A
AC Output
Rated output power 4000W 5000W
Output waveform Pure sine wave
Phases Single phase 2
wire + ground
3 phase 4
wire + ground
Single phase
2 wire +
ground
3 phase 4 wire
+ ground
Output rated voltage 220VAC ±3% 380VAC ±3% 220VAC ±3% 380VAC ±3%
Output Frequency 50Hz or 60Hz±0.05Hz
Output voltage range (V) 110/120/220/230/240/380/400/415VAC optional
Power Factor(PF) 0.9
Overload Ability 150%, 10s
Efficiency ≥95%
Waveform distortion rate
(THD) <3%(Linear load)
Dynamic Response (0 to
100% load) 5%,≤50ms
Display LCD
Running mode Working continuously
Electrical insulation
properties 2000Vac, 1 Minute
Protection
function
Protection Input reverse polarity, under voltage, overvoltage, output
over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
working
environment
Ambient temperature -15~+55℃
Using environment
humidity 0~90%,No condensation
Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Using altitude(m) ≤2000
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 9
Model SDP-6000W SDP-8000W
Isolation mode Low Frequency Transformer
DC Input Input rated voltage (Vdc) 120V 192V 120V 192V
Input rated current(A) 50A 31A 67A 42A
AC Output
Rated output power 6000W 8000W
Output waveform Pure sine wave
Phases Single phase 2
wire + ground
3 phase 4 wire
+ ground
Single phase 2
wire + ground
3 phase 4
wire + ground
Output rated voltage 220VAC ±3% 380VAC ±3% 220VAC ±3% 380VAC ±3%
Output Frequency 50Hz or 60Hz±0.05Hz
Rated Output Voltage
(V) 110/120/220/230/240/380/400/415VAC optional
Power Factor(PF) 0.9
Overload Ability 150%, 10s
Efficiency ≥95%
Waveform distortion rate
(THD) <3%(Linear load)
Dynamic Response (0 to
100% load) 5%,≤50ms
Display LCD
Running mode Working continuously
Electrical insulation
properties 2000Vac, 1 Minute
Protection
function
Protection Input reverse polarity, under voltage, overvoltage, output
over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
working
environment
Ambient temperature -15~+55℃
Using environment
humidity 0~90%,No condensation
Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Using altitude(m) ≤2000
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 10
Model SDP-10KW SDP-12KW
Isolation mode Low Frequency Transformer
DC Input Input rated voltage (Vdc) 192V 220V 192V 220V
Input rated current(A) 52A 45.5A 62.5A 54.5A
AC Output
Rated output power 10KW 12KW
Output waveform Pure sine wave
Phases Single phase 2
wire + ground
3 phase 4 wire
+ ground
Single phase 2
wire + ground
3 phase 4
wire + ground
Output rated voltage 220VAC ±3% 380VAC ±3% 220VAC ±3% 380VAC ±3%
Output Frequency 50Hz or 60Hz±0.05Hz
Rated Output Voltage
(V) 110/120/220/230/240/380/400/415VAC optional
Power Factor(PF) 0.9
Overload Ability 150%, 10s
Efficiency ≥95%
Waveform distortion rate
(THD) <3%(Linear load)
Dynamic Response (0 to
100% load) 5%,≤50ms
Display LCD
Running mode Working continuously
Electrical insulation
properties 2000Vac, 1 Minute
Protection
function
Protection Input reverse polarity, under voltage, overvoltage, output
over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
working
environment
Ambient temperature -15~+55℃
Using environment
humidity 0~90%,No condensation
Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Using altitude(m) ≤2000
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 11
Model SDP-15KW SDP-20KW
Isolation mode Low Frequency Transformer
DC Input Input rated voltage (Vdc) 192V 240V 192V 240V
Input rated current(A) 78A 62.5A 104A 83A
AC Output
Rated output power 15KW 20KW
Output waveform Pure sine wave
Phases Single phase 2
wire + ground
3 phase 4 wire
+ ground
Single phase 2
wire + ground
3 phase 4
wire + ground
Output rated voltage 220VAC ±3% 380VAC ±3% 220VAC ±3% 380VAC ±3%
Output Frequency 50Hz or 60Hz±0.05Hz
Rated Output Voltage
(V) 120/220/230/240/380/400/415VAC optional
Power Factor(PF) 0.9
Overload Ability 150%, 10s
Efficiency ≥94%
Waveform distortion rate
(THD) <3%(Linear load)
Dynamic Response (0 to
100% load) 5%,≤50ms
Display LCD
Running mode Working continuously
Electrical insulation
properties 2000Vac, 1 Minute
Protection
function
Protection Input reverse polarity, under voltage, overvoltage, output
over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
working
environment
Ambient temperature -15~+55℃
Using environment
humidity 0~90%,No condensation
Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Using altitude(m) ≤2000
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 12
Model SDP-25KW SDP-30KW
Isolation mode Low Frequency Transformer
DC Input Input rated voltage (Vdc) 240V 300V 240V 300V
Input rated current(A) 104A 83A 125A 100A
AC Output
Rated output power 25KW 30KW
Output waveform Pure sine wave
Phases Single phase 2
wire + ground
3 phase 4 wire
+ ground
Single phase 2
wire + ground
3 phase 4
wire + ground
Output rated voltage 220VAC ±3% 380VAC ±3% 220VAC ±3% 380VAC ±3%
Output Frequency 50Hz or 60Hz±0.05Hz
Rated Output Voltage
(V) 120/220/230/240/380/400/415VAC optional
Power Factor(PF) 0.9
Overload Ability 150%, 10s
Efficiency ≥94%
Waveform distortion rate
(THD) <3%(Linear load)
Dynamic Response (0 to
100% load) 5%,≤50ms
Display LCD
Running mode Working continuously
Electrical insulation
properties 2000Vac, 1 Minute
Protection
function
Protection Input reverse polarity, under voltage, overvoltage, output
over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
working
environment
Ambient temperature -15~+55℃
Using environment
humidity 0~90%,No condensation
Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Using altitude(m) ≤2000
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 13
Model SDP-35KW SDP-40KW
Isolation mode Low Frequency Transformer
DC Input Input rated voltage (Vdc) 300V 360V 300V 360V
Input rated current(A) 117A 97A 133A 111A
AC Output
Rated output power 35KW 40KW
Output waveform Pure sine wave
Phases Single phase 2
wire + ground
3 phase 4 wire
+ ground
Single phase 2
wire + ground
3 phase 4
wire + ground
Output rated voltage 220VAC ±3% 380VAC ±3% 220VAC ±3% 380VAC ±3%
Output Frequency 50Hz or 60Hz±0.05Hz
Rated Output Voltage
(V) 120/220/230/240/380/400/415VAC optional
Power Factor(PF) 0.9
Overload Ability 150%, 10s
Efficiency ≥93%
Waveform distortion rate
(THD) <3%(Linear load)
Dynamic Response (0 to
100% load) 5%,≤50ms
Display LCD
Running mode Working continuously
Electrical insulation
properties 2000Vac, 1 Minute
Protection
function
Protection Input reverse polarity, under voltage, overvoltage, output
over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
working
environment
Ambient temperature -15~+55℃
Using environment
humidity 0~90%,No condensation
Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Using altitude(m) ≤2000
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 14
Model SDP-50KW SDP-60KW
Isolation mode Low Frequency Transformer
DC Input Input rated voltage (Vdc) 360V
Input rated current(A) 139A 167A
AC Output
Rated output power 50KW 60KW
Output waveform Pure sine wave
Phases 3 phase 4 wire + ground
Output rated voltage 380VAC ±3%
Output rated current 76A (phase current) 91A (phase current)
Output Frequency 50Hz or 60Hz±0.05Hz
Rated output Voltage (V) 380/400/415/440VAC optional
Power Factor(PF) 0.9
Overload Ability 150%, 10s
Efficiency ≥93%
Waveform distortion rate
(THD) <3%(Linear load)
Dynamic Response (0 to
100% load) 5%,≤50ms
Display LCD
Running mode Working continuously
Electrical insulation
properties 2000Vac, 1 Minute
Protection
function
Protection Input reverse polarity, under voltage, overvoltage, output
over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
working
environment
Ambient temperature -15~+55℃
Using environment
humidity 0~90%,No condensation
Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Using altitude(m) ≤2000
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 15
Model SDP-70KW SDP-80KW
Isolation mode Low Frequency Transformer
DC Input Input rated voltage (Vdc) 360V
Input rated current(A) 195A 222A
AC Output
Rated output power 70KW 80KW
Output waveform Pure sine wave
Phases 3 phase 4 wire + ground
Output rated voltage 380VAC ±3%
Output rated current 106A (phase current) 121A (phase current)
Output Frequency 50Hz or 60Hz±0.05Hz
Rated output Voltage (V) 380/400/415/440VAC optional
Power Factor(PF) 0.9
Overload Ability 150%, 10s
Efficiency ≥92%
Waveform distortion rate
(THD) <3%(Linear load)
Dynamic Response (0 to
100% load) 5%,≤50ms
Display LCD
Running mode Working continuously
Electrical insulation
properties 2000Vac, 1 Minute
Protection
function
Protection Input reverse polarity, under voltage, overvoltage, output
over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
working
environment
Ambient temperature -15~+55℃
Using environment
humidity 0~90%,No condensation
Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Using altitude(m) ≤2000
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 16
Model SDP-100KW SDP-150KW
Isolation mode Low Frequency Transformer
DC Input Input rated voltage (Vdc) 360V 492V 360V 492V
Input rated current(A) 278A 203A 417A 305A
AC Output
Rated output power 100KW 150KW
Output waveform Pure sine wave
Phases 3 phase 4 wire + ground
Output rated voltage 380VAC ±3%
Output rated current 151A (phase current) 227A (phase current)
Output Frequency 50Hz or 60Hz±0.05Hz
Rated output Voltage (V) 380/400/415/440VAC optional
Power Factor(PF) 0.9
Overload Ability 150%, 10s
Efficiency ≥92%
Waveform distortion rate
(THD) <3%(Linear load)
Dynamic Response (0 to
100% load) 5%,≤50ms
Display LCD
Running mode Working continuously
Electrical insulation
properties 2000Vac, 1 Minute
Protection
function
Protection Input reverse polarity, under voltage, overvoltage, output
over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
working
environment
Ambient temperature -15~+55℃
Using environment
humidity 0~90%,No condensation
Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Using altitude(m) ≤2000
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 17
Model SDP-200KW SDP-250KW
Isolation mode Low Frequency Transformer
DC Input Input rated voltage (Vdc) 492V
Input rated current(A) 406.5A 508A
AC Output
Rated output power 200KW 250KW
Output waveform Pure sine wave
Phases 3 phase 4 wire + ground
Output rated voltage 380VAC ±3%
Output rated current 303A (phase current) 379A (phase current)
Output Frequency 50Hz or 60Hz±0.05Hz
Rated output Voltage (V) 380/400/415/440VAC optional
Power Factor(PF) 0.9
Overload Ability 150%, 10s
Efficiency ≥92%
Waveform distortion rate
(THD) <3%(Linear load)
Dynamic Response (0 to
100% load) 5%,≤50ms
Display LCD
Running mode Working continuously
Electrical insulation
properties 2000Vac, 1 Minute
Protection
function
Protection Input reverse polarity, under voltage, overvoltage, output
over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
working
environment
Ambient temperature -15~+55℃
Using environment
humidity 0~90%,No condensation
Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Using altitude(m) ≤2000
CE
Standard
EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
EN61000-3-12:2005, EN61000-3-11:2000
www.lgis.cc 18
SANDI ELECTRIC CO.,LTD
Add: Lvao Industrial Zone Liushi Town,Yueqing City,
Zhejiang Province 325604,China.
Tel:+86-577-62793760
Fax:+86-577-61209955
Web: http://www.lgis.cc
E-mail: [email protected]
MSN: [email protected]
Skype: katrina0682