PURCHASE OFFER MACHINES - holz.fordaq.com€¦ · STANDREW Stanisław Pioch Mojusz 51 a ; 83-334...

STANDREW Stanisław Pioch Mojusz 51 a ; 83-334 Miechucino

NIP 589 -158 -04- 14 Tel./fax 058 684 78 07; 605 997 939

Mojusz 01.2017r

PURCHASE OFFER MACHINES

Company STANDREW invites your to take advantage of our offer.For sure you will be pleased with the service and the more the

machine.

If you have any questions, please contact us.

Michael Kasjaniuk

mob: +48 531 119 490email: [email protected]

1. Moulder Weinig Powermat 1000 net price 150 000 €

- Machines in stock- After reconditioned- Perfect condition- Worked only 6738.2 h

Specifications:

- Year 2008

- Working width 20-230 mm- Working height 8-160 mm

- Spindles fi 40 mm

- Feed continuously adjustable 6-30 m / min

- Pneumatically activated roller before the 1st bottom tool "high-low"

- Automatically adjusts the height of cut

- The machine is controlled completely from the desktop

- Spindles 8 pieces arranged:

BOTTOM + RIGHT + LEFT + RIGHT + TOP + TOP + BOTTOM + UNIVERSAL

1) The spindle horizontal bottom - 7.5 kW 8000 rpm / min2) The right vertical spindle - 5.5 kW 8000 rpm / min3) The left vertical spindle - 5.5 kW 12000 rpm / min PowerLock System4) The right vertical spindle - 5.5 kW 12000 rpm / min PowerLock System5) The upper horizontal spindle - 7.5 kW 12000 rpm / min PowerLock System6) The upper horizontal spindle - 7.5 kW 12000 rpm / min PowerLock System7) spindle horizontal bottom - 7.5 kW 12000 rpm / min PowerLock System8) Universal head rotates 3600 - 7.5 kW 8000 rpm / min

- Engine feed 4 kW- Engine regulating the amount of 0.75 kW- The total power of 59 kW- Centralized lubrication

- All heads have a digital display screen CAS DigiSet- Four pinch rolls in counter lower- Seven of the upper pinch rollers milled steel- Three rubber rollers pinch the top

- Pneumatic clamps feed roller- Drive sliding cardan shafts- Touch Control Panel- Filtering and cooling system in the control cabinet (ensuring trouble-free operation of automation)

2. Wide belt sander Sandingmaster HCSB2 Net price 4853 €

Technical parameters:

- Grinding width 1300 mm

- Two units

- shaft

- shoe

- Pneumatic oscillation

- Electrical height adjustment

- Total power of 22 kW

Overall dimensions machine:

- Length 280 cm

- Width 200 cm

- Height 250 cm

- Weight ~ 3000 kg

3. Chipper WHT Leonhardt 2000

- Machine in very good condition

- Year of manufacture 2013

Technical parameters

- Entry width 1250 mm

- Inlet height 500 mm

- 4 knives

- Wood length up to 7000 mm

- The main engine of 1000 kW

- Engine pinch rolls 75 kW

- Hydraulic motor 22.5 kW

- Engine / cooling filters 3 kW

- Engine pulling a knife against 5.5 kW

- Engine heated hydraulic unit 4 x 1.4 kW

- Rotor diameter 1600 mm

- Feed speed to 50 m / min

- Static load of 600 kN machines

- Relieving dynamic machines 1,500 kN

- Six shafts extending upper and lower

- Interchangeable pads with spikes

4. Double line optimizes OptiCut 304 from the scanner

Full line optimizes two optymalizerkami OptiCut 304 and the scanner to automatically select defects in the material.

2 pieces of an optimizing GreCon Dimter, Type: Opticut 304, year 2004 .:The dimensions of machinedThe length of the input 600 - 4000 mmFull optimization up to 3000 mmPartial optimization to 3000 mmEnter a width of 40-200 mmStrong entry 15-80 mmSections of wood max.200x25 mm, 170x50mm, 80x80mm, 140x60 mmFixed length of drink min. 180 mmCombining a length of 150 mm sawCut / Ablängtoleranz + / - 0.8 - 1.5 mmThe curvature max timber. 10 mm per meter lengthTypes of softwood or hardwoodFeed speed of 170 m / min infinitelyCut to measure from 0.6 to 1.0 seccomplete with conveyor Sellingchalk station

5. Diesel wood chipper Jensen A 425 D

Net price 10 725 € New price 9 725 €

Diesel wood chipper Jensen A 425 D

- Machines in stock- After reconditioned- Perfect Condition

Technical data:

- Throat dimension 250 mm x 250 mm- Dimension hopper 1000 mm x 850 mm- Two toothed twisted pinch rolls- Year 1998- Machine equipped with reverse- NEW BATTERY

- Cutting disc diameter of 700 mm- Four knives- The dimensions of the knife 260 mm x 60 mm- The engine two-cylinder 50 HP- Shifter of feed speed adjustment- Towing hitch height adjustable

- Feed cardan shafts- Inlet chipper, truck rotated 360 "- Depart chopper rotated 360 "- Road lighting- Hand brake- Machine equipped with the ignition

6. Chipper Husmann HFG II


- Machines in stock - After the technical review - Very good

Specifications:

- Electric motor with 45 kW - Feed-driven hydraulic fluid - Chipper on undercarriage of road lighting - Screen size 60 mm x 60 mm - The maximum height of the 120 mm

- Rotor diameter 550 mm - Rotor width 800 mm - 64 hardened steel beaters - Interchangeable beaters 15 mm wide

- Hay and pulling roller driven by a hydraulic motor - Chipper equipped with control cabinet - Roller towing gear - Hay floor with a width of 780 mm

Dimensions of the machine:

- Length 650 cm - Width 230 cm - Height 240 cm

- Weight 3500 kg

7. Multi saw A.COSTA LEOPARD 2 / S

Net price 31 250 €

- The machine in stock

- Reconditioned

- very good condition


- Engines 2 x 55 kW

- Engine feed 4.5 kW

- Motor height adjustment 1.5 kW

- Blade diameter max 300 mm

- Spindle diameter 2 x 60 mm

- Diameter of the sleeve at the wedge 80 mm 12 mm

- Spindle length 400 mm

- Track width 350 mm

- Cutting height 200 mm

- Adjustable feed 4-24 m / min

- Automatic central lubrication

- The minimum length of the 700 mm


- Six rolls of the upper pressure

- Pneumatic clamps

- Five combs anti-ejection

- Nozzle diameter of 220 mm and 180 mm

- RPM spindles 4500 rpm


- Length 260 cm

- Width 220 cm

- Height 180 cm

- Weight 4000 kg

8. WEINIG POWERMAT 1000

Net price 112 500 EUR

SPECIFICATIONS:

Year of manufacture 2008

- Working width 20 -230 mm- Working height 8 -160 mm

- Spindles fi 50

- Feed 6-30 m / min adjustable

- Pneumatic załanczana roll before 1 bottom tool "high- low"

- Engine 7.5 KW feed

- Automatic adjustment of thickness planing motor 0.75 kW

- Spindles - 8 pieces arranged:

BOTTOM + RIGHT + LEFT + RIGHT + TOP + BOTTOM + TOP + BOTTOM

1. The spindle horizontal bottom - 11 kW 8000 rev / min.

2. The head of law department - 7.5 KW 8000 rev / min system

3. Head left division - 15 kW, 8000 rev / min system

- CAS electronic digital display axial setting,

4. The right vertical spindle - 7.5 kW,

- The CAS DigiSet - Electronic digital display adjustment

5. The head horizontal top - 11 kW,- CAS DigiSet - electronic digital display,- Pneumatically adjustable pressure-shoe

6. Lower horizontal - 7.5 kW,

- CAS DigiSet digital display additional adjustmentand - pneumatically regulkowany-shoe pressure

7. The upper horizontal 7.5 kW,

8. The lower horizontal 7.5 kW 8000 rpm,- Change the lock power tools

- Total power 82Kw

- Four pinch rolls in the lower countertop- Six of the top pinch roller milled steel- 2 rubber rollers pinch the top

- Pneumatic clamping system of feed roller- Feed drive for a cardan shafts - roll in the lower table-driven- Automatic adjustment of the thickness of the panel- Touch control panel

Includes bushings and tool Powerlock

9. Chipper Schreder for plastics

Net price 10 875 € new price 7 475 €

Chipper Hopper for plastics

- The machine in stock- After the technical review- Stan bdb

- Engine: 2x 1.8 kW (very powerful gear)- 2 shafts with knives acting counter

- Shaft length 490 mm- Shaft diameter 240 mm - speed shaft 18 RPM- Twelve blades on the shaft

- Hopper dimensions: 490 mm x 570 mm

Overall dimensions:- Length 145 cm- The width of 140 cm,- Height 290 cm- Weight 1000 kg

The main advantages of the machine:

* Stable construction* Recommendable* For every professional* Machine is not painted - original paint

10. Saw - drill for frames U2PRW ZOTECH Net Price 12 450 €

- Year: 2007- State technicznyy BDB- After reconditioned

TECHNICAL PARAMETERS :- Max. the amount of material being cut - 60 mm- Max. the width of the material being cut at an angle of 45 ° - 345 mm- Max. the width of the material being cut at an angle of 90 ° - 345 mm- Max. length of cut material - 2200 mm- Min. Length of cut material at 2 angles of 45 ° - 200 mm- Min. Length of cut material at 2 angles of 90 ° - 450 mm- The diameter of the main saw blade - 400 mm- Diameter of scoring saw - 150 mm- The diameter of the drill front seat - 10 mmHeads drilling (drilling heads) - 4 mm- Number of spindles- Spacing of spindles- Spindle alignment - 32; 32; 40- Spacing of spindles - linear- Max. Front drilling depth - 60 mm- The installed capacity - 4,9 Kw- Operating pressure - 0.6 MPa

- Dimensions :

- Length 4300 mm- Width 1600 mm- Height 1570 mm- Weight 1700 kg

11. Bander FELDER FORMAT - 4 - Perfect 80


- Machines in stock- After reconditioned- Year of manufacture 2006- The machine is not painted - original paint

EQUIPPED WITH POWER:

- Milling SKIRT UP AND DOWN - engine with a power of 0.68 kW- Corner rounding (CAROUSEL)- Radius scraping R 2 - turned ON MECHANICAL- CYCLIN ADHESIVE pneumatically- POLISHING UNIT- PRE-MILLING - Engine power of 1.1 kW

- Lamp Infrared heating plates- 3kg adhesive tank, rapid exchange

- Unit 3 pressure roller 1 driven- End trimming unit 2 balls 0,5kW- Pneumatic tilt 15 degrees clipper unit

- Component spray unit before entering the polishing- Milling unit periphery desktop set with 4 positions

ELECTRICAL EQUIPMENT:

- Power supply 3 x 400 V- Frequency 50 Hz- Installed power 16.4 kW- Operating the machine with a system of touch-screen color display

DIMENSIONS OF WORK:

- Min. Workpiece width 60 mm- Min. Length 140 mm workpieces- The thickness of 10-55 mm, laminated- Stickers tapes from the roll with a thickness of 0.4-3 mm- Wood solid wood strips with a thickness of 8 mm (10 mm)

UNITS:

- Bringing the peripheral tape roll with the support plate, Ø 800 mm, for PVC / ABS / veneered wood edges

- Aggregate leveling mats, 2 controlled depth milling units, 12 000 rev. / Min., 1.5 hp (1.1 kW), adjustable to a maximum depth of cut. 1.5 mm, the cutter to align with diamond blades Ø 60 x 56 mm

- Guillotine for cutting coiled material to a thickness of 3 mm

- Aggregate adhesive to glue EVA granules, Teflon coated glue pot with synchronized glue applicator roller and quick-change system 3 kg

- Pneumatic clamping unit, 1 drive roller and 2 conical pressure rollers

- The deck, 2 motors, 12000 rev. / Min. 0.68 hp (0.5 kW), HW saw blade Z 24, Ø 100 x ø 20 x 3.2 mm, tilt angle of 0 ° -15 °

- Milling unit on the periphery of the straight and round, two motors, 12000 rev / min and 0.93hp (0.68 kW), a tilting angle of 0 ° -15 ° with a radius R = 3 mm

- Aggregate for the treatment of corners, 12000 rev. / Min, controlled by CNC processing workpieces corners, 0.3 hp (0.22 kW)

- Cyklinujący unit, connected mechanically to the radius R = 2 mm

- Heating unit, two hot air blowers 20-600 ° C

- Buffing unit, 2 engines, 1 400 rev / min., 90 W, tilting

- Equipped with cutters of radius R = 2 mm

12. Multi-saw edger CML 320 2R


- The machine in stock

- Reconditioned

- very good condition


- Main engine 22 kW

- Engine feed 1.3 kW

- Motor adjustment of 1.1 kW

- Engine gauge wheels 0.25 kW

- Maximum cutting height 110 mm

- Maximum cutting width of 350 cm

- Maximum width of 800 mm

- Track width 350 mm

- The minimum length of the 560 mm

- Maximum blade diameter 360 mm

- Spindle diameter 70 mm

- 95 mm diameter sleeve

- Regulated speed

- Three lasers

- Two discs floating

- The possibility of programming the cutting width

- Three modes of operation (Manual, Semi Auto, Auto)

- Five reels top rollers

- Four rows of detents

- console


- Automatic lubrication


- Length 260 cm

- Width 170 cm

- Height 230 cm

- Weight 2050 kg

13. Chipper WEIMA type WL 10


- The machine in stock- Reconditioned- Vg condition

TECHNICAL DATA :- Main engine power 37 kW- Engine power of the hydraulic pump 1.5 KW

- AUTO Auto Reverse- HYDRAULIC DRAWER

- Length of the rotor 1000 mm- Shaft wielonożowy clatter 23- Dimensions of the blades: 30 mm x 30 mm- Sieve fi 20 mm- Knives lace

- The diameter of the nozzle suction fi 250- Rotor diameter 275 mm- Height drawers pressure 275 mm- The length of the drawer pressure of 800 mm

Overall dimensions machine:- Length 270 cm- Width 230 cm- Height 200 cm- Weight 3000 kg

14. Optimizing GRECON-DIMTER 502


- Machines in stock - After the technical review - Vg condition

- Year of production 1998 - Cutting defects - Cut fixed length - Cutting the length of the packet - Optimization of the boards - Cutting length min / max. 400 - 7300 mm - Infeed table -7500 mm - Receiving table - 2600 mm - Cutting width min / max. 20 - 360 mm - Cutting height, min / max. 10-160 mm - Cutting dimensions 360x30, 240x160, 300x120 mm - Disc diameter fi 550 mm - Wysowa pneumatic saws - Podwujne roll dociskojace material pneumatically - Feed adjustable max. 60 m / min - The installed capacity is about 8 kW - Serewo drive pusher - Voltage 400 V / 50 Hz, max voltage fluctuations. 5% - Working pressure of 8 bar - Dimensions caałkowite: - Length 10900 mm - Width 1500 mm - Height 1650 mm - The weight of about 2500 kg In addition to machine new toothed belt to drive the pusher

15. Multi-tracked saw RAIMANN K 23 E

Net pirce 15 375 €

TECHNICAL PARAMETERS :- The machine in stock- Reconditioned- Ready to work- The ability to use multisaws and trimming element at the same time- 2 rows of tumblers- Track width 230 mm- Floating disc will automatically slide open with the possibility of programming- Caterpillar with interchangeable caps- Possibility to program 5 programs- Main engine power of 30 KW- The engine of feed with a capacity of 1.5 kW- Engine spacing discs 2 x 0.37 kW- Spindle length 450 mm- Feed continuously adjustable range from 0 to 35 m / min- Maximum cutting height 120 mm- The maximum blade diameter of 350 mm- The minimum disc diameter of 200 mm- The possibility of cutting short workpieces- Roll pulling the output lower- Centralized lubrication trac- Spindle diameter 65 mm- Side guide leading material- Feed speed adjustable on the inverter- Two lasers

Dimensions :Length: 230 cmWidth: 250 cmHeight 230 cm

weight 2200 kg

16. Bander Mizrak


- perfect condition- unpainted- Year of manufacture 2012

- The original documentation manuals

TECHNICAL PARAMETERS :

- Machine designed for edge processing PVC / ABS- Veneer up to 3mm thick and strips up of wood to 9mm thickness

- Maximum thickness of 50mm- Minimum thickness of 0.4 mm- Minimum width of 60mm

- Min height of the element 8mm

- Maximum height of the element 54mm- minimum length of workpiece 100mm

- Feed speed of 12m / min-removable bracket with rollers- Diameter suction nozzles 2x120mm, 2x100mm- Air pressure of 6-8 bar- Total power 5.5 kW- The diameter of the exhaust nozzle 12cm

equipment:

- a plate- Pre-cutter - milling plate- A tank with adhesive, the hot melt adhesive (granulate) further roll for applying adhesive 2.5kg- Heated strip tape- Guillotine - pre-cutting veneer- 3 rollers- 2 units Cutting finishing balls- 2 units Milling shaping edge (radial cutters)

- Cyclin - to remove the excess glue- polishers

Overall dimensions:- The length of 570cm- Width 65cm- Height 150cm- Weight 1150kg

Bander MZK 4 is a very efficient machine.

Its extremely fast and precise work will satisfy even the most demanding expectations.

17. Moulder WEINIG Profimat 22 N

Net price 7 475 €

- The machine in stock- Reconditioned- Vg condition- Documentation manuals

- Max workpiece width 22cm- Max workpiece height 12cm

4 SPINDLE1 horizontal bottom 22cm - 5.5 kW2 vertical right, 3 left vertical - 7.5 kW4 horizontal top 22cm - 7.5 kW- All heads adjustable up / down, right-left- The diameter of the spindle fi - 40 mm

- 4 pulling rollers toothed, upper- Shaft discharge from the top rubber, pulling- A shaft bottom discharge table rubber drive- FEED shafts Karde

- Infinitely adjustable feed 4-20 m / min- Engine feed 1.5 kW- Total power of 22 KW

- ELECTRIC SET THICKNESS planing motor 0,25kW

- Central lubrication top

- The length of the countertop introducing 197 cm- The diameter of the exhaust nozzles 1x140mm, 3x 120mm- Closed cabin

18. Weinig Unimat 23 SP


TECHNICAL PARAMETERS :- Workpiece width min / max 20/230 mm- The height of the workpiece min / max 10/90 mm- Max diameter of 350 mm Tool- Diameter min 180 mm Tool- Spindle diameter 50 mm- The maximum distance from the table saw 80 mm- Main engine power 2 x 22 kW- Engine power feed 7.5; kW- Rotation speed of 5600 RPM spindle- Feed speed 6-36 m / min- Automatic central lubrication- 3 steel rollers in the lower countertop- 4 rubber rollers pulling the top- Size rollers feeding rollers ø 140 x 50, 30, 20, 15 x ø 35 mm- Required pressure of 6 bar / 10 bar- Nominal pressure of 8 bar

The machine is dedicated for system builders garden, or floorboard manufacturers to produce lamella.High-performance machine for multi-layer parquet, three-layer boards, etc.perfect quality of the product surface tolerance of + / _ 0.1mm ball with a kerf of 1.2 mm (depending on width)highest precision for both the machine and the final productthe optimal solution for all requirementsfast, easy adjustmentcomfortable, easy to useeasy integration with existing solutions Weinig increasing productivitySpecial solutions for specific requirements- Sprinkler system tools extending their lifespan which increases yield by 20% and more

17. The line for bonding wood Dimter type ProfiPressT5500 HF


The line for bonding wood Dimter type ProfiPress T5500 HFTECHNICAL PARAMETERS :Year Built: 2009The length of the input elements of min / max 900-5500 mmLamella width 40-120 mmThe thickness of 16-60 mm componentsThe width of 250-1350 mm platesDimension cut the saw transverse 250-1350mmThe average size of 1000mmTotal pressure min / max 54-352 kNThe width of the loading of the press in one cycle max.1350 mmMax.powierzchnia loading of the press in one cycle of 7.15 m²Hydraulic pressure max. 260 barType of wood HardHumidity of wood 8-12%Adhesive 1-Komponenten LeimCONFIGURATION LINEAutomatic loading and gluing station integrated with ProfiPressIntegrated Camera Optical Character Recognition chalk Press ProfiPress T 5500 Length / width of the pieces was 5500 × 1350mmAutomatic pressure adjustmentThe hydraulic unit integratedThe control cabinet / control integratedHeating high-frequency currents Press WCZHF generator def. Cavallo 50 kW current generator WCZPACKAGE FOR BONDING EQUIPMENT HARD WOODThickness 60 mmTransporting conveyor belt for the press-board will select from the pressConveyor length 2700 mmSaw machine for cutting width

Motor 13.5 kW Fi Ø 400 mmSaw-cut endlessly plates glued to the desired widthmax. disc width 1350 mmConveyor angle from the storage station platesReceive plates and onward transportation of the slabs cut to width,Conveyor length 1800 mmPusher plates to automatically saw the longitudinal passingSaw automatic cutting lengthMotor 13.5 kW Ø 450 mm<i> Saw slitting discs glued to the desired length of the finalmax. disc width 1350 mmThe roller conveyor at the exitReception table gotwych cut plates and further transport to the station manually receptionConveyor width 1350 mm

18. Sanding line COSTA CT / CCT 1350

Net price 27 500€

Sanding line COSTA CT / CCT 1350

- Machine in very good condition- Grinding two sides

Technical data:

- Year 2000- Shoe sequential- Controlled from the desktop

- Sanding width 3 -160 mm- Machine is equipped with five units- Feed speed adjustable on gearmotor- Minimum pressure of 6 bar- Feed speed 5 - 25 m / min

The system aggregates:

1) Lower shaft power of 15 kW, V tape 20 m / sec2) Lower shoe 11 kW, V tape 16 m / sec3) Upper shaft power of 15 kW, V tape 20 m / sec4) Upper shaft 11 kW, V tape 20 m / sec5) Upper shoe with a capacity of 11 kW, V tape 16 m / sec

- Brushes at the outlet of the machine 2 x 1.1 kW- Engine feed 7.5 kW- Engines height adjustment 2 x 0.55 kW

- Engine turbine 5,5 kW- Total power of 87 kW

Connection size:

1) and 2 160 mm x 200 mm2) 4 x 160 mm and 6 mm x 100

The dimensions of the line:

- Length 800 cm- Width 220 cm- Height 250 cm- Weight 10500 kg

19. Double SANDIGMASTER sanding line type SA-3310-1350


The line consists of two machines connected to each conveyor belt.

SPECIFICATIONS:

I-SANDER TRIPLE upper sanding units

- Year of manufacture 1999

1. The grinding unit:

- Contact spiral roller milled rubber calibration fi.275mm- Engine power of 11 KW


- Contact spiral roller milled rubber calibration fi.275mm- Engine with a power of 15 KW

3. The grinding unit

- Contact spiral roller milled rubber calibration fi.275mm- Engine with a power of 18 KW- Feed liquid engine of 8 Kw- Working width 40-1360mm- Height 150 mm grinding

II-SANDER TRIPLE bottom sanding units


- Contact spiral roller milled rubber calibration fi.275mm- Engine power of 11 KW


- Contact spiral roller milled rubber calibration fi.275mm- Engine with a power of 15 KW

3. The grinding unit

- Contact spiral roller milled rubber calibration fi.275mm- Engine power of 22 KW- Liquid feed motor power 4 Kw- Working width 40-1360mm- Height 140 mm grinding- Year of manufacture 1999

Machines equipped with:

- Pneumatic oscillation- Pneumatic belt tensioning- AUTOMATIC GRINDING HEIGHT ADJUSTMENT 0.37 kW motor

- Automatic braking units (air brakes)- Air pressure of 8 bar- Air consumption 0,9m3 / min- The need to exhaust air 7000m3 / hto machine- Intake air speed 25-30m / s

MACHINE DIMENSIONS:

* 4800 mm length* Width of 2400 mm* Height 2500 mm- The weight of a single line item of about 4700 kg, the total weight of about 9000kg

20. KARA chipper type KV2512-30


SPECIFICATIONS;

- Machines in stock- After reconditioned- Very good condition

- Width 1200 mm shaft- 300 mm shaft diameter- 28 knives

- Length 2100mm drawer- 1200 mm width drawer- Hydraulic gear motor 3KW

- Main motor power 37 KW

dimensions:

- The length of 6100 mm- Width of 2400 mm- The weight of about 5000 kg

- Year of construction 1993

The main advantages of the machine:

* German production* Leading manufacturer chippers* Recommendable* For each professional

21. Chipper Willibald MZA 3500 S

Net price 63 750 € SPECIAL OFFER Net 43 000 €

- Machines in stock- Reinforced version- Performance 180 m3 / h

technical data- Magnetic Separator- Main Engine 6 cylinder MAN- Engine output 420 hp- The engine is liquid cooled

- Choke dimensions:- Width 125 cm- Height 60 cm- The length of filling 400 cm

- 2 pinch rolls - first gear working on the hydraulics- Diameter of 50 cm

- Rotor diameter 60 cm- Number of beaters 48- Conduct chipper 4662 h- Three rows of knives against last adjustable hydraulics

- Road lighting- Air brakes- Wood chipper on two axes- Hook of approval

22. Wide belt sander DMC

Net price 7 975 €

- Machines in stock

- Max workpiece width 110cm- Max workpiece height 16cm

- 2 units:

1) a metal cylinder2) shaft with sectional pad

- Rubber rollers, pinch between units- Oscillation of the suction belt- Automatic belt centering system- Potentiometer setting the thickness planing- Feed speed adjustment

- The power of the first unit of 18.5 KW- The power of the second unit 11KW

- Working pressure of 6-8 bar- Extractor connection port diameter 2x250 mm

Overall dimensions

- Length 195cm- Width of 185cm- Height of 215cm

- The weight 1750KG

23. MAGGI Boring Boring System 323

Net price 8 975 €

- Machines in stock- After reconditioned- State vg

- Year 2006- CE

TECHNICAL DATA:- The number of spindles 3 x 23- The distance between first and last drill 704 mm- The distance between the centers of each spindle 32 mm- Max. workpiece size 80 x 850 x 3000 mm- Max. Clamp height of the work table 85 mm- Regulation of drilling depth 0-100 mm- The number of spindles in the vertical heads 23 pc- Pressure 6 - 7 bar- The noise level to 76.1 dB

- Motors power 1.5 kW vertical heads- Engine power 1.5 kW horizontal head- Revolutions 2800 rev / min

The main features of the machine:- The machine consists of three heads, two vertical and one horizontal- Heads werytyklane have a range of 0-90 degrees rotation, enabling several ways drilling

Overall dimensions machine:- Length / width / height: 179/100 / 135cm- Weight: 750kg

24. Moulder Gubisch AG / GS 220


- The machine in stock- After the technical review- Prepared to work

- PRODUCTION YEAR 1997

- Working width 20-220 mm- Planing height 8-120 mm- For wet wood

- Spindle Ø 40 mm- Threaded Spindles- Roll the counter before the first head

- Feed the gearmotor infinitely adjustable 4-32m / min

- ELECTRIC HEIGHT ADJUSTMENT planing

- Spindles equipped with brakes

- MACHINE WITH CONTROL PANEL

Spindles 5 pieces arranged:

BOTTOM LEFT + RIGHT + + + TOP BOTTOM

1) spindle horizontal bottom - 7.5 kW 6000 RPM2) Spindle vertical right - 7.5 KW 6000 RPM3) The spindle vertical left - 7.5 kW 6000 RPM4) spindle horizontal top - 7.5 kW 6000 RPM5) spindle horizontal bottom - 7.5 kW 6000 RPM

- Motor feed 4 kW- Motor height adjustment 0,37 kW- The total power of 63 kW- Centralized lubrication

- The three pinch rolls in the lower Balaci- Five of upper rolls of steel stretching- Two roll rubber upper pulling

- Pneumatic clamps feed roller- Drive shafts Cardan- Minimum length of the 600 mm

25. Multi-shaft saw A.Costa Puma 2/50


Multi-shaft saw A.Costa Puma 2/50

- Machines in stock- After reconditioned- Perfect condition

Technical data:

- Maximum cutting width 380 mm- Track width 350 mm- Two shafts with a diameter of 60 mm fi- Two motors with an output of 2 x 50 kW- Engine feed 2kW

- Cutting height 200 mm- Feed speed adjustable on the inverter- Electrically adjustable cutting height- Centralized lubrication- Extractor connection port diameter of 2 x 210 mm- Each independently adjustable shaft

Overall dimensions machine:- Length 210 cm- Width 210 cm- Height 180 cm- Weight 4000 kg

26. Four drill-through VITAP type SIGMA 2BR

Net price 66 000 EUR

- Year of production 2008. - The first user. Equipment (hardware) 1 Utility work table with a length of 3050 mm, 2 horizontal drilling units 2 units with heads of the 21 spindles, 3 units lower vertical drilling units 6 - Each unit includes two heads after 11 spindles, rotated by 90 degrees 4 upper vertical drilling units 3 units - Each unit includes two heads after 11 spindles, rotated by an angle 90 of degrees 5 conveyor belts 2 units with electric drive, - Clamps the top of the workpiece 4 pcs, 6 The central lubrication machine 7 Control Panel automatic and manual, 8 cabinet power supply 400V, - Connection of 23 kW, - Compressed air 0.6-0.8 MPa. Basic data Nominal - Field processing (work area) of size 3050 mm - Wheelbase 32 mm spindles - Drive motors power 1.1 kW drilling heads - Maximum dimensions workpiece panel: długość3050 mm - Width 800 mm, thickness 80 mm - Minimum dimensions of the workpiece panel: length 240 mm - Width 150 mm, thickness 10 mm - Install the air supply 6 bar - Security system Drill is designed for medium and large series production of the possibility of placing the line. Treated material can be wood, plywood, chipboard, plastic, laminates, etc. Machine performance can be increased by further automatic loading and unloading systems. The productivity of the machine is up to 4500 parts per shift (8 hours)..

The company "STANDREW" reserves the right to change and errors. All rights reserved ©

PURCHASE OFFER MACHINES - holz.fordaq.com€¦ · STANDREW Stanisław Pioch Mojusz 51 a ; 83-334...

Documents

Transcript of PURCHASE OFFER MACHINES - holz.fordaq.com€¦ · STANDREW Stanisław Pioch Mojusz 51 a ; 83-334...