boi17{lai ae nlclolf(pdf) 01 pdf pdf pdf pdf pdf pdf p f 26 i
published_2_resources_documents_98_materials_materials_hfs100.pdf
1
www.habia.com world class cable solutions 246 Materials A1 Note: All dimensions in mm and ±4% unless stated Date: 2010-02-01 Created: CJV Approved: JB Reference: M_I_01 Data provided indicates nominal values unless stated otherwise and is only valid for reference purposes at the time of publication and is subject to change without prior notice. Code letter: I Key features: Flame Retardant (HFS 100) Halogen Free Radiation Tolerant to 10 7 Gy Rugged Water Resistant Applications: HFS 100 is Habia Cable’s primary general purpose sheathing material. The material features excellent dynamic properties, and is easy to mould to, making it an ideal choice for coiled cables and dynamic applications. HFS 100 can also frequently be found in nuclear and defence applications. Although both versions of the compound are highly water-resistant, the TPU 90 (non-flame retardant) version of this material is primarily used in evironments where the best possible water resistance is required. Properties: HFS 100 is a flame retardant sheathing material with excellent dynamic and moulding properties. HFS 100 has a matt finish. TPU 90 is the non-flame retardant version of HFS 100. It offers a gloss finish as standard and features improved water resistance. Physical & Mechanical Option Test method Conditions Value Continuous service temperature All IEC 60216 20,000 hrs 90 o C Density HFS 100 TPU 90 ASTM D 792 ASTM D 792 1.23 g/cm 3 1.10 g/cm 3 Elongation at break HFS 100 TPU 90 ASTM D 638 ASTM D 638 450% 500% Hardness HFS 100 TPU 90 ASTM D 2240 ASTM D 2240 Shore A Shore A 88 87 Radiation resistance All IEC 60544 10^7 Gy Temperature range All Internal -40 o C to 100 o C Tensile strength at break HFS 100 TPU 90 ASTM D 638 ASTM D 638 37 MPa 50 MPa Water absorption TPU 90 ASTM D 570 0.4% Electrical Option Test method Conditions Value Dielectric constant HFS 100 TPU 90 DIN 53483 DIN 53483 50 Hz 50 Hz 8,0 7,5 Dissipation factor HFS 100 TPU 90 DIN 53483 DIN 53483 50 Hz 50 Hz 0,040 0,063 Volume resistivity HFS 100 TPU 90 DIN 53482 ASTM D257 10^11 Ohms/cm >10^11 Ohms/cm Flammability Option Test method Conditions Value Combustion corrosivity All IEC 60754-2 pH 6,2 / 16uS/mm Flammability HFS 100 TPU 90 UL 94 UL 94 1,6mm 1/32” V-0 V-2 Oxygen index HFS 100 TPU 90 ASTM D 2863 ASTM D 2863 25% 22% Smoke index HFS 100 TPU 90 NF F 16-101 NF F 16-101 28.1 (class F2) 10.1 (class F1) Temperature index All NES 715 174 o C Toxicity index HFS 100 HFS 100 TPU 90 TPU 90 NF X 70-101 NES 713 NF X 70-101 NES 713 600 o C per 100g 600 o C per 100g 10,4 5 7,1 8 Chemical Option Test method Conditions Value Acids All Internal Good Bases All Internal Fair Fuels All Internal Good Oils All Internal Excellent Additional Information A Material Safety Data Sheet (MSDS) can be provided for this material on request An Arrhenius plot in o C or Kelvin can be provided for this material on request HFS 100 (TPU 90) sheathing material -40/100 o C
Transcript of published_2_resources_documents_98_materials_materials_hfs100.pdf
www.habia.comworld class cable solutions246
Mat
eria
ls
A1Note: All dimensions in mm and ±4% unless stated Date: 2010-02-01 Created: CJV Approved: JB Reference: M_I_01 Data provided indicates nominal values unless stated otherwise and is only valid for reference purposes at the time of publication and is subject to change without prior notice.
Code letter: I
Key features:Flame Retardant (HFS 100)Halogen FreeRadiation Tolerant to 107 GyRuggedWater Resistant
Applications:HFS 100 is Habia Cable’s primary general purpose sheathing material. The material features excellent dynamic properties, and is easy to mould to, making it an ideal choice for coiled cables and dynamic applications. HFS 100 can also frequently be found in nuclear and defence applications.Although both versions of the compound are highly water-resistant, the TPU 90 (non-flame retardant) version of this material is primarily used in evironments where the best possible water resistance is required.
Properties:HFS 100 is a flame retardant sheathing material with excellent dynamic and moulding properties. HFS 100 has a matt finish.
TPU 90 is the non-flame retardant version of HFS 100. It offers a gloss finish as standard and features improved water resistance.
Physical & Mechanical Option Test method Conditions ValueContinuous service temperature All IEC 60216 20,000 hrs 90oC
Density HFS 100TPU 90
ASTM D 792ASTM D 792
1.23 g/cm3
1.10 g/cm3
Elongation at break HFS 100TPU 90
ASTM D 638ASTM D 638
450%500%
Hardness HFS 100TPU 90
ASTM D 2240ASTM D 2240
Shore AShore A
8887
Radiation resistance All IEC 60544 10^7 GyTemperature range All Internal -40oC to 100oC
Tensile strength at break HFS 100TPU 90
ASTM D 638ASTM D 638
37 MPa50 MPa
Water absorption TPU 90 ASTM D 570 0.4%
Electrical Option Test method Conditions Value
Dielectric constant HFS 100TPU 90
DIN 53483DIN 53483
50 Hz50 Hz
8,07,5
Dissipation factor HFS 100TPU 90
DIN 53483DIN 53483
50 Hz50 Hz
0,0400,063
Volume resistivity HFS 100TPU 90
DIN 53482ASTM D257
10^11 Ohms/cm>10^11 Ohms/cm
Flammability Option Test method Conditions ValueCombustion corrosivity All IEC 60754-2 pH 6,2 / 16uS/mm
Flammability HFS 100TPU 90
UL 94UL 94
1,6mm1/32”
V-0V-2
Oxygen index HFS 100TPU 90
ASTM D 2863ASTM D 2863
25%22%
Smoke index HFS 100TPU 90
NF F 16-101NF F 16-101
28.1 (class F2)10.1 (class F1)
Temperature index All NES 715 174oC
Toxicity indexHFS 100HFS 100TPU 90TPU 90
NF X 70-101NES 713NF X 70-101NES 713
600oCper 100g600oCper 100g
10,457,18
Chemical Option Test method Conditions ValueAcids All Internal GoodBases All Internal FairFuels All Internal GoodOils All Internal Excellent
Additional InformationA Material Safety Data Sheet (MSDS) can be provided for this material on request
An Arrhenius plot in oC or Kelvin can be provided for this material on request
HFS 100 (TPU 90) sheathing material -40/100oC
