PUBLICATIONS 2015-2016 · Publications 2015-2016 /2 École d’ingénierie B. Bideau, É. Loranger,...
Transcript of PUBLICATIONS 2015-2016 · Publications 2015-2016 /2 École d’ingénierie B. Bideau, É. Loranger,...
PUBLICATIONS 2015-2016
A. Brevets
n/a
B. Chapitres de livre
n/a
C. Livres
O. Sosso-Mayi, J.T. Agbebavi et M.B. Obounou Akong, « Modélisation des flammes et
des polluants en micro-combustion », Éditions Universitaires Européennes, ISBN-13:
978-384-1671-820, septembre 2015.
J.C. Cuillière, « Introduction à la méthode des éléments finis -2ème édition », Éditions
Dunod, ISBN 978-210-0742-622, janvier 2016.
D. Articles de conférence
L. Paradis-Tanguay, A. Lajeunesse et B. Chabot, « Nanofibres électrofilées pour la
rétention de composés pharmaceutiques », concours d'affiches scientifiques des études de
cycles supérieurs, Université du Québec à Trois-Rivières, Canada, 22-23 mars 2016.
L. Paradis-Tanguay, A. Landes, A. Lajeunesse et B. Chabot, « Utilisation de nanofiltres
pour la rétention de résidus pharmaceutiques dans les eaux usées », 84e Congrès de
l'ACFAS, Université du Québec à Montréal, Canada, 9-13 mai 2016.
I. Lakhdhar, B. Chabot and J.P. Mangin, « Removal of Nickel Ions from Aqueous
Solution by application of Electrospun Chitosan-Polyethylene Oxide Membranes »,
Tappi Intern. Conf. on Nanotechnology for Renewable Materials, Atlanta, GA, June
22-25, 2015.
R. Lanouette and S. Robert, « How chemical treatment on long fibres affects the
development of fibres during refining », 102e Congress annual ATPPC, Montreal,
Canada, February 1-5, 2016.
D. Myja, É. Loranger et R. Lanouette, « Production d'un matériau nanocellulosique par
oxydation TEMPO de pâte thermomécanique du Québec », concours d'affiches
scientifiques des études de cycles supérieurs, Université du Québec à Trois-Rivières,
Canada, 22-23 mars 2016.
Publications 2015-2016 /2
École d’ingénierie
B. Bideau, É. Loranger, J. Bras et C. Daneault, « La protection alimentaire, un enjeu pour
tous : application d'un biocomposite comme emballage actif », concours d'affiches
scientifiques des études de cycles supérieurs, Université du Québec à Trois-Rivières,
Canada, 22-23 mars 2016.
L. Cherpozat, É. Loranger et V. Drouadaine, « Optimisation du procédé d'une pyrolyse
conventionnelle à l'échelle du laboratoire », concours d'affiches scientifiques des études
de cycles supérieurs, Université du Québec à Trois-Rivières, Canada, 22-23 mars 2016.
A. Tibouda, É. Loranger and P.J. Mangin, « Physical analysis and CFD simulation of the
flow of MNFC coating colours in curtain coater », 102e Congrès annuel ATPPC,
Montreal, Canada, February 1-5, 2016.
B. Bideau, N. Adoui, J. Bras, É. Loranger and C. Daneault, « Characterization of the
barriers properties of nanocelulose composite for food packaging applications »,
4th
EPNOE Intern. Polysaccharide Conf. - Session affiche, Varsovie, Pologne, October
18-22, 2015.
K. Jradi, É. Loranger and C. Daneault, « Use of Ultrasonic Technology in the catalysis of
the TEMPO Oxidation for the Nano-Fibrillation of Kraft pulp : Reinforcement of
Nanocomposites Materials », Int. Chem. Congress of Pacific Basin Societies
(PACIFICHEM), Honolulu, USA, December 15-20, 2015.
A. Tibouda, É. Loranger and P.J. Mangin, « Physical analysis and CFD simulation of the
flow of MNFC coating colours in curtain coater », 102e Congrès annuel ATPPC,
Montreal, Canada, February 1-5, 2016.
C. Villemont, S. Barnabé et P.J. Mangin, « La biohuile fractionnée à base de biomasse
forestière », 102e Congrès annuel ATPPC, Montréal, Canada, 1-5 février 2016.
C. Villemont, C. Briens, F. Berruti and P.J. Mangin, « Pilot scale bio-oil production for
bitumen & asphalts applications », Symposium CRIBIQ - BioFuelNet Thermal conversion
task force, Magog, Canada, March 17-18, 2016.
C. Villemont, B. Delcroix et P.J. Mangin, « Développement d'un bioraffinerie régionale
intégrée : Vision 2023 - La Tuque », Concours d'affiches scientifiques des études de
cycles supérieurs, Université du Québec à Trois-Rivières, Canada, 22-23 mars 2016.
C. Villemont et P.J. Mangin, « Les résidus forestiers comme source renouvelable pour la
fabrication de bitumes et asphaltes verts », Colloque multidisciplinaire des cycles
supérieurs de l'AGE UQTR, Université du Québec à Trois-Rivières, Canada, 10 mars
2016.
M.A. Charfeddine, P.J. Mangin, J.-F. Bloch and C. Ridgway, « Paper structure
modification by layered addition of micro-nano fibrillated cellulose », École d'été,
Autrans, France, August 26-28, 2015.
Publications 2015-2016 /3
École d’ingénierie
M.A. Charfeddine, F. Roussière, J.-F. Bloch, C. Ridgway, P.A.C. Gane and P.J. Mangin,
« 3D Structure analysis of Z-structured paper by the layered addition of Micro-
Nano-Fibrillated Cellulose (MNFC) », Int. Paper Physics Conf., Univ. of Tokyo, Japan,
Oct. 29th - Nov. 1st, 2015.
M.A. Charfeddine, F. Roussière, J.-F. Bloch, C. Ridgway, M. Schenker, P.A.C. Gane and
P.J. Mangin, « Effect of Carboxy-Methyl-Cellulose (CMC) as a dispersing agent for
micro-nano fibrillated cellulose (MNFC) on z-structured TMP Paper and MNFC films
properties », Tappi Intern. Conf. on Nanotechnology for Renewable Materials, Atlanta,
GA, June 22-25, 2015.
P.J. Mangin, « Biofuels and biorefining : a sustainable techno-economic solution for
regional development », École d'été, Autrans, France, August 26-28, 2015.
P.J. Mangin, « Proposals towards the development of a forest biomass
bioenergy/bioeconomy industry sector. The La Tuque project : Can regional solutions be
exported ? », EU-CANADA Workshop, Renewable Carbon Sources processing to fuels
and chemicals, Brussels, Belgium, July 9-10, 2015.
P.J. Mangin, « Bioéconomie et bioénergie : enjeux et tendances », École internationale
sur les énergies renouvelables - cours, Évian-les-Bains, France, 27 août au 5 sept. 2015.
P.J. Mangin, « Quebec's perspectives in the context of a growing global bio-economy »,
12th
Annual World Congress on Industrial Biotechnology, Montreal, Canada, July 19-22,
2015.
P.J. Mangin and P. Bergeron, « La Tuque Vision 2023 : a first regional biorefinery based
on forest residues », 12th
Annual World Congress on Industrial Biotechnology, Montreal,
Canada, July 19-22, 2015.
P.J. Mangin, D. Matte and M. Dubé, « A new model relating precoat and topcoat
stuctures to ink penetration », 27th
PTS Coating Symp., Munich, September 16-17, 2015.
C. Villemont, S. Barnabé et P.J. Mangin, « La biohuile fractionnée à base de biomasse
forestière », École internationale sur les énergies renouvelables - Session affiches, Évian-
les-Bains, France, 27 août au 5 sept. 2015.
C. Villemont, S. Barnabé et P.J. Mangin, « La biohuile fractionnée à base de biomasse
forestière : potentiel d'intégration dans les asphaltes et bitumes », 83e Congrès de
l'ACFAS, Université du Québec à Rimouski, Canada, 25-29 mai 2015.
C. Villemont, C. Briens, S. Barnabé and P.J. Mangin, « Fractionated bio-oils from forest
biomass. Potential of bio-oil integration in asphalts and bitumen. », Advanced Biofuels
Symp., Montreal, Canada, July 22-24, 2015.
Publications 2015-2016 /4
École d’ingénierie
B. Delcroix, P.J. Mangin, P. Bergeron and C. Briens, « Combining pyrolysis and
gasification for operation efficiency in large scale biorefinery projects », CRIBIQ -
BioFuelNet Symp., Orford, Canada, March 17-18, 2016.
P.J. Mangin, « Quebec bioenergy development. Large scale forest residues biorefinery
issues and solutions », International Congress « Biomass : Fuel & Power – 2016 »,
Moscou, Russia, April 6-7, 2016.
P.J. Mangin, « Les biocarburants : phase critique du déploiement de la bioraffinerie
forestière », Salon des technologies environnementales du Québec, Québec, Canada,
15 mars 2016.
I. Lakhdhar, P.J. Mangin and B. Chabot, « Electrospun Chitosan-polyethylene Oxide
Nanofibers for Adsorption of Heavy Metals from Aqueous Solutions : Kinetic and
Selectivity Study », 98th
Canadian Chem. Conf. and Exhibition - Poster session, Ottawa,
Canada, June 13-17, 2015.
I. Lakhdhar, P.J. Mangin and B. Chabot, « Optimization of nickel ions removal from
aqueous solutions by chitosan-polyethylene oxide electrospun nanofibers », 4th
Intl. Conf.
Forests and Water in a Changing Environment - Poster Session, Kelowna, BC, Canada,
July 6-8, 2015.
I. Lakhdhar, P.J. Mangin and B. Chabot, « Optimization of nickel ions removal from
aqueous solutions by chitosan-polyethylene oxide electrospun nanofibers », Water
Resources Management Conf., A Coruna, Espagne, June 15-17, 2015.
K. Agbossou, « Énergies renouvelables et réseaux intelligent», Colloque international
sur les énergies renouvelables et la production décentralisée, Université du Québec à
Trois-Rivières, Trois-Rivières (Québec), 6 novembre 2015.
K. Agbossou, « Développement des réseaux intelligents (smart grid)», École
internationale d'été énergies renouvelables Evian-les-Bains (France), 27 août au
5 septembre 2015.
A. Cardenas, C. Guzman, M. Chemsi and K. Agbossou, « Development of AC Microgrid
Test Bench with Hydrogen Fuel Cell and Renewable Sources », Conference-IEEE PES-
APPEEC- Xi'an, China, October 25-28, 2016.
Z. Zhao, K. Agbossou and A. Cardenas, « Connectivity for Home Energy Management
Applications », Conference-IEEE PES-APPEEC- Xi'an, China, October 25-28, 2016.
Cardenas, K. Agbossou and C. Guzman, « Development of Real-Time Admittance
Analysis System for Residential Load Monitoring », IEEE International Symposium on
Industrial Electronics (ISIE-2016), Santa Clara, USA, June, 2016.
Publications 2015-2016 /5
École d’ingénierie
C. Guzman, K. Agbossou and A. Cardenas, « Residential Modeling of Centralized and
Baseboard Space Heating System », IEEE International Symposium on Industrial
Electronics (ISIE-2016), Santa Clara, USA, June, 2016.
M. H. Cano, K. Agbossou, S. Kelouwani and Y. Dubé, « Power management system for a
stand-alone hybrid renewable energy system hydrogen production base on the
uncertainty », 6th World Hydrogen Technologies Convention, WHTC 2015, Sydney,
Australia, October 11-14, 2015.
J. Jaguemont, L. Boulon and Y. Dubé, « Thermal management of a Li-ion battery pack in
cold weather including aging », Electric Vehicle Symposium 29, Montreal, Canada, 2016.
J. Jaguemont, L. Boulon, Y. Dubé and D. Poudrier, « Low-Temperature Charging Tests
for Lithium-ion Battery », International Conference on Renewable Energy : Generation
and Applications (ICREGA) 2016, Belfort, France, 2016.
M. Zuniga, J. Jaguemont, L. Boulon and Y. Dubé, « Heating Lithium-ion Batteries with
Bidirectional Current Pulses », IEEE Vehicle Power and Propulsion Conference (VPPC)
2015, Montreal, Canada, 2015.
J. Jaguemont, L. Boulon, Y, Dubé, P. Venet and A. Sari, « Low Temperature Aging Tests
for Lithium Ion Batteries », IEEE International Symposium on Industrial Electronics
(ISIE) 2015, Rio, Brazil, 2015.
J. Jaguemont, L. Boulon, Y. Dubé and D. Poudrier, « Low Temperature Discharge Cycle
Tests for a Lithium Ion Cell », IEEE Vehicle Power and Propulsion Conference (VPPC)
2014, Coïmbra, Portugal, 2014.
A. Amamou, L. Boulon, S. Kelouwani, K. Agbossou and P. Sicard, « Thermal
Management Strategies for Cold Start of Automotive PEMFC », IEEE Vehicle Power
and Propulsion Conference (VPPC), p. 1-6, October, 2015.
S. Fukuhara, N. Marx, K. Ettihir, L. Boulon, Y. Ait-Amirat and M. Becherif, « A
Lumped fluidic model of a PEM fuel cell Anode Chamber for fault tolerant strategy
design », International Conference on Renewable Energy: Generation and Applications
(ICREGA) 2016, Belfort, France, 2016.
K. Ettihir, M. Higuita Cano, L. Boulon and K. Agbossou, « Design of an adaptative EMS
for fuel cell vehicules », International Conference on Renewable Energy: Generation and
Applications, ICREGA’16 in Belfort, France, February 8-10, 2016.
N. Marx, D. Hissel, F. Gustin, L. Boulon and K. Agbossou, « On the sizing and energy
management of an hydrid multi-stack fuel cell – battery system», International
Conference on Renewable Energy: Generation and Applications, ICREGA’16 in Belfort,
France, February 8-10, 2016.
Publications 2015-2016 /6
École d’ingénierie
C. Dépature, T. Jokela, W. L’homme, A. Bouscayrol, L. Boulon, P. Sicard and
A. Belahcen, « Full-Scale Power Hardware-In-the-Loop Simulation of an Electric
Vehicle Using Energetic Macroscopic Representation », IEEE Vehicle Power and
Propulsion Conference (VPPC) 2015, Montreal, Canada, 2015.
N. Marx, J. Cardozo, L. Boulon, K. Agbossou, F. Gustin and D. Hissel, « Comparison of
the Series and Parallel Architectures for Hybrid Multi-Stack Fuel Cell - Battery
Systems », IEEE Vehicle Power and Propulsion Conference (VPPC) 2015, Montreal,
Canada, 2015.
J. Cardozo, N. Marx, L. Boulon and D. Hissel, « Comparison of Multi-Stack Fuel Cell
System Architectures for Residential Power Generation Applications Including Electrical
Vehicle Charging », IEEE Vehicle Power and Propulsion Conference (VPPC) 2015,
Montreal, Canada, 2015.
M. Becherif, Q. de Bortoli, H. S. Ramadan, L. Boulon, and F. Claude, « Thermal
management for efficiency enhancement for multi-stack fuel cell electric vehicle », IEEE
Vehicle Power and Propulsion Conference (VPPC) 2015, Montreal, Canada, 2015.
N. Marx, L. Boulon, F. Gustin, D. Hissel and K. Agbossou, « Power sharing strategies
for multi-stack air breathing PEMFC », Fundamentals and Development of Fuel Cells
2015, Toulouse, France, 2015.
K. Ettihir, L. Boulon and K. Agbossou, « Maximum Efficiency and Maximum Power
Operation Modes of a Fuel Cell System Based on Real-Time Model Identification »,
Fundamentals and Development of Fuel Cells 2015, Toulouse, France, 2015.
C. Départure, W. L’homme, L. Boulon, A. Bouscayrol and P. Sicard, « Multi-stack Fuel
Cell System for a Range Extender Electric Vehicle », Fundamentals and Development of
Fuel Cells 2015, Toulouse, France, 2015.
A. Amamou, L. Boulon, S. Kelouwani, K. Agbossou and P. Sicard, « Thermal
management strategies for cold start of automotive », PEMFC IEEE Vehicle Power and
Propulsion Conference (VPPC’2015), Montreal, Canada, October 19-22, 2015.
C. Dépature, T. Jokela, W. L’homme, A. Bouscayrol, L. Boulon, P. Sicard and
A. Belahcen, « Full-Scale Power Hardware-In-the-Loop Simulation of an Electric
Vehicle using Energetic Macroscopic Representation », IEEE Vehicle Power and
Propulsion Conference (VPPC’2015), Montreal, Canada, October 19-22, 2015.
A. Amamou, L. Boulon, S. Kelouwani, K. Agbossou and P. Sicard, « C Thermal
management strategies for cold start of automotive PEMFC », Vehicle Power and
Propulsion Conference (VPPC) IEEE, VPPC 2015 in Montreal, Quebec, Canada,
October 19-22, 2015.
Publications 2015-2016 /7
École d’ingénierie
N. Marx, J. Cardozo, L. Boulon, F. Gustin, D. Hissel and K. Agbossou, « Comparison of
the series and parallel architectures for hybrid multi-stack fuel cell - battery systems »,
Vehicle Power and Propulsion Conference (VPPC) IEEE, VPPC 2015 in Montreal,
Quebec, Canada, October 19-22, 2015.
J. Xiao, Y. Peng, P. Bénard and R. Chahine, « Thermal effects on breakthrough curve of
pressure swing adsorption for hydrogen purification », International Conference on
Hydrogen Production 2015 (ICH2P-2015), Oshawa, Canada, May 3-6, 2015.
J. Xiao, W. Han, G. Zhang, P.-C. Sui and R. Chahine, « Potential market and strategies
for part reuse and material recovery of new energy vehicles in China », Workshop: How
Efficient is Electro Mobility? Hanse-Wissenschaftskolleg, Delmenhorst, Germany, June
4-5, 2015.
J. Xiao, P. Bénard and R. Chahine, « Estimation of final hydrogen temperature from
refueling parameters based on rule of mixtures », 6th
International Conference on
Hydrogen Safety, Yokohama, Japan, October 19-21, 2015.
Y. Peng, Y. Ming, J. Xiao, P. Bénard and R. Chahine, « Thermal effect of breakthrough
curve of hydrogen mixture adsorption in activated carbon/zeolite layered bed », Chinese
Society of Engineering Thermophysics (CSET) Annual Conference on Heat and Mass
Transfer, Dalian, China, October 30-31, 2015.
X. Mu, R. Li, J. Xiao, P. Bénard and R. Chahine, « Multizone lumped parameter model
for simulating fast filling of high pressure hydrogen storage tank », Chinese Society of
Engineering Thermophysics (CSET) Annual Conference on Heat and Mass Transfer,
Dalian, China, October 30-31, 2015.
J. Xiao, P. Bénard and R. Chahine, « Analytical solution of dual-zone lumped parameter
model for refueling vehicular hydrogen tank », 16th
Chinese Hydrogen Energy
Conference, Zhenjiang, China, November 28-29, 2015.
L. Tong, J. Xiao, P. Bénard and R. Chahine, « Thermal effect and flowthrough cooling of
a large-scale hydrogen storage and delivery tank during adsorption process », 16th
Chinese Hydrogen Energy Conference, Zhenjiang, China, November 28-29, 2015.
L. Fang, J. Xiao, P. Bénard and Richard Chahine, « Modeling of pressure swing
adsorption process for separating H2/CO2 mixtures », 16th
Chinese Hydrogen Energy
Conference, Zhenjiang, China, November 28-29, 2015.
Y. Wang, J. Xiao, P. Bénard and R. Chahine, « Simulation of two-bed pressure swing
adsorption process for hydrogen purification », 16th
Chinese Hydrogen Energy
Conference, Zhenjiang, China, November 28-29, 2015.
Publications 2015-2016 /8
École d’ingénierie
S. Zhao, J. Xiao, P. Bénard and R. Chahine, « Simulation of pressure swing adsorption
process for high purity hydrogen recovery », 16th
Chinese Hydrogen Energy Conference,
Zhenjiang, China, November 28-29, 2015.
X. Wang, J. Xiao, P. Bénard and R. Chahine, « Determination of hydrogen pre-cooling
temperature based on refueling parameters », 16th
Chinese Hydrogen Energy Conference,
Zhenjiang, China, November 28-29, 2015.
J. Cheng, J. Xiao, P. Bénard and R. Chahine, « Estimation of final hydrogen temperature
in 35MPa and 70MPa tanks », 16th
Chinese Hydrogen Energy Conference, Zhenjiang,
China, November 28-29, 2015.
J. Marchildon, M. L. Doumbia and K. Agbossou, « SOC and SOH Characterisation of
Lead Acid Batteries », 41st Annual Conference of the IEEE Industrial Electronics Society
(IECON2015) Yokohama, Japan, November 9-12, 2015.
L.-J. Kere, M.-L. Doumbia, S. Kelouwani and K. Agbossou, « Cascaded H-Bridge
Multilevel Converter for Electric Vehicle Speed Control », IEEE Vehicle Power and
Propulsion Conference (VPPC), p.1-6, October, 2015.
A. K. Traoré, A. Cardenas, M. L. Doumbia, K. Agbossou and A. S. H. Maiga, « VHDL
Description of Power Management Strategy for an Autonomous Photovoltaic Water
Pumping System for Agricultural Application », EVER’16 Monaco, France, March,
2016.
J. Kere, M. L. Doumbia, S. Kelouwani and K. Agbossou, « Cascaded H-Bridge
Multilevel Converter for Electric Vehicle Speed Control », Vehicle Power and
Propulsion Conference (VPPC) IEEE, VPPC 2015 in Montreal, Quebec, Canada,
October 19-22, 2015.
J. Ouyang, W.-P. Zhu, D. Massicotte and M. Lin, « Energy Efficient Optimization for
Physical Layer Security in Cognitive Relay Networks », IEEE Communication
Conference (ICC), 2016.
M. Khelifi, D. Massicotte and Y. Savaria, « Towards Efficient and Concurrent FFTs
Implementation on Intel Xeon/MIC cluster for LTE and HPC Applications », IEEE Int.
Symp. on Circuit and Systems (ISCAS), Montreal, May, 2016.
J. Ouyang, W.-P. Zhu, D. Massicotte and M. Lin, « Energy Efficient Optimization for
Physical Layer Security in Cognitive Relay Networks », Accepted at IEEE International
Conference on Acoustics, Speech and Signal Processing (ICASSP), Shanghai, May, 2016.
M. Ahmed-Ouameur, D. Massicotte and W.-P. Zhu, « Carrier Frequency and Sampling
Rate Offsets Effect on Sub 6 GHz Massive MIMO », IEEE Nordic Circuits and Systems
Conference (NORCAS), Oslo, Norway, October, 2015.
Publications 2015-2016 /9
École d’ingénierie
M. Khelifi, D. Massicotte and Y. Savaria, « Parallel Independent FFTs Implementation
on Intel Processors and Xeon Phi for LTE and OFDM Systems », IEEE Nordic Circuits
and Systems Conference (NORCAS), Oslo, Norway, October, 2015.
X. Ji, W.-P. Zhu, D. Massicotte and M. Ahmed-Ouameur, « Energy Efficient Power
Allocation and Relay Location for Asymmetric Bi-Directional Relaying », IEEE Global
Conf. on Signal & Information Processing (GlobalSIP), Orlando, December, 2015.
M. Benmimoune, E. Driouch, W. Ajib and D. Massicotte, « Feedback Energy Reduction
in Massive MIMO Systems », IEEE Global Communications Conference: Wireless
Communications (Globecom), San Diego, December 6-10, 2015.
M. Benmimoune, E. Driouch, W. Ajib and D. Massicotte, « Feedback Reduction and
Efficient Antenna Selection for Massive MIMO System », IEEE Vehicular Technology
Conference (VTC-Fall), Boston, September 6-9, 2015.
C. L. Fall, P. Turgeon, C. Gosselin, A. Lecours, M. Boukadoum, S. Roy, D. Massicotte
and B. Gosselin, « Design of an Intuitive Wireless Controller for the Control of a Robotic
Arm by Upper Body Disabled People », Int. Conf. of the IEEE Engineering in Medicine
and Biology Society (EMBS), Milan, August, 2015.
H. Merabti and D. Massicotte, « Robust Nonlinear Acoustic Echo Cancellation using
Genetic Algorithms », IEEE Int. Conf. on Digital Signal Processing (DSP), Special
session, Singapore, July, 2015. (papier invité)
S. Boukaka, H. Teiar, D. Massicotte and P. Sicard, « FPGA Implementation of SVPWM
Approximation », Conference on Design of Circuits and Integrated Systems (DCIS 2015),
Estoril, Portugal, November 25-27, 2015.
S. Boukaka, H. Teiar and P. Sicard, « FPGA Implementation of a Laws Library of
Adaptive Control for PMSM », Conference on Design of Circuits and Integrated Systems
(DCIS 2015), Estoril, Portugal, November 25-27, 2015.
H. Teiar, H. Chaoui and P. Sicard, « Almost Parameter-free Sensorless Control of
PMSM », IEEE Conference on Industrial Electronics Society (IECON 2015), Yokohama,
Japon, November 9-12, 2015.
M. Lemaire, P. Sicard and J. Bélanger, « Prototyping and Testing Power Electronics
Systems using Controller Hardware-In-The-Loop (HIL) and Power Hardware-In-The-
Loop (PHIL) Simulations » IEEE Vehicle Power and Propulsion Conference
(VPPC’2015), Montreal, Canada. October 19-22, 2015.
M.-J. Blondin, P. Sicard and J. Sanchis Saez, « Convergence analysis of hybrid
ACO/Nelder-Mead tuning method for PID controller structures with anti-windup », SIAM
Conference on Control and its Applications, Paris, France, July 8-10, 2015.
Publications 2015-2016 /10
École d’ingénierie
H. Teiar, H. Chaoui and P. Sicard, « Simple Adaptive Fuzzy Logic Control Structure of
Permanent Magnet Synchronous Machines », IEEE Transportation Electrification
Conference and Expo (ITEC 2015), Détroit MI, June 14-17, 2015.
H. Chaoui, A. Oukaour, H. Gualous and P. Sicard, « Power Factor Compensation Based
Control Scheme for Permanent Magnet Synchronous Machine Drives », IEEE
Transportation Electrification Conference and Expo (ITEC 2015), Detroit, Michigan,
June 14-17, 2015.
D. Komljenovic and G. Abdul-Nour, « Impact of Rare Events on the Strategy of Asset
Management », Congrès International de génie industriel, CIGI, Québec, octobre 2015.
M. Elbounjimi, G. Abdul-Nour and D. Ait-Kadi, « Challenges in the design of green
supply chain network », IFAC Symposium on Information Control in Manufacturing
(INCOM 2015), Ottawa, Canada, May 11-13, 2015.
C. Lavoie and G. Abdul-Nour, « How to define a creative SME », INCOM 2015, Ottawa,
Canada, IFAC-Papers Online, Vol. 48, no 3, p. 1-2444 (2015), 15th IFAC Symposium on,
Information Control Problems in Manufacturing INCOM 2015, Edited by Alexandre
Dolgui, Jurek, Sasiadek and Marek Zaremba. (Available online at
www.sciencedirect.com, ELSEVIER)
J. St-Pierre, L. Foleu, G. Abdul-Nour and S. Nomo, « Les Freins au Développement des
PME Camerounaises: qu’en pensent les entrepreneurs ? », 6th Africa Business and
Entrepreneurship Conference, New York, 2015.
A. Tremblay et A. Badri, « Un nouvel outil de mesure de la performance en santé et
sécurité du travail des PME au Québec », 84e congrès de l'ACFAS, Montréal, Québec,
9-13 mai 2016.
A. Tremblay et A. Badri, « La performance en santé et en sécurité du travail : comment
l’évaluer et l’améliorer ? » 38e congrès de l’AQHSST, Shawinigan, Québec, 18-20 mai
2016.
É. Goudreau et C. Baril, « Étude des pratiques et de la durée moyenne de séjour dans les
urgences du Québec », 8e Conférence en gestion et ingénierie des systèmes hospitaliers,
Casablanca, Maroc, 2016.
D. Vadeboncoeur et C. Baril, « Validation d’un modèle de simulation d’une urgence pour
patients ambulatoires », 11e Congrès International de génie industriel, Ville de Québec,
Québec, 2015.
Publications 2015-2016 /11
École d’ingénierie
Y. Chinniah, F. Gauthier, D. Burlet-Vienney and B. Aucourt, « Analysis of two risk
estimation tools applied to safety of machinery », 8th International Conference Safety of
Industrial Automated Systems – SIAS 2015, Königswinter, November 2015.
D. Pelchat et F. Gauthier, « Études des pratiques d’analyse des risques machines dans le
secteur minier québécois », 11e Congrès International de génie industriel – CIGI2015,
Québec, Octobre 2015.
F. Gauthier and D. Lagacé, « Critical Success Factors in the Development and
Implementation of Special Purpose Industrial Tools: An Ergonomics Perspective »
6th
International Conference on Applied Human Factors and Ergonomics (AHFE), Las
Vegas, July 2015.
A. Nana, J.-C. Cuillière et V. François, « Automatisation de la conception de pièces et
structures par optimisation topologique », 84ème congrès de l'ACFAS, Montréal, 9-13
mai 2016.
S.S. Karganroudi, J.-C. Cuillière, V. François et S.A. Tahan, « Automatisation de
l’inspection de pièces flexibles à l’état libre », 84ème congrès de l'ACFAS, Montréal,
9-13 mai 2016.
S.S. Karganroudi, J.-C. Cuillière, V. François et S.A. Tahan, « Utilisation de la méthode
des éléments finis dans le cadre de l’inspection automatique de pièces flexibles », actes
du 7ème colloque québécois sur le développement numérique de produits, Montréal,
4 mai 2016.
A. Couture, J.-C. Cuillière, V. François et P. Pilvin, « Modélisation par éléments finis des
microstructures de matériaux hétérogènes », affiche présentée lors du concours d’affiches
2016 de l’Université du Québec à Trois-Rivières, 22-23 mars 2016.
A. Chebbi, J.-C. Cuillière et V. François, « Discrimination des caractéristiques
géométriques sous sollicitations mécaniques », affiche présentée lors du concours
d’affiches 2016 de l’Université du Québec à Trois-Rivières, 22-23 mars 2016.
A. Nana, J.-C. Cuillière et V. François, « Automatisation de la conception mécanique par
optimisation topologique », affiche présentée lors du concours d’affiches 2016 de
l’Université du Québec à Trois-Rivières, 22-23 mars 2016.
F. Martel, Y. Dubé, S. Kelouwani and K. Agbossou, « Economy-focused PHEV battery
lifetime management through optimal fuel cell load sharing », IEEE Vehicle Power and
Propulsion Conference (VPPC), VPPC 2015 in Montreal, Quebec, Canada, p.1-9,
October 19-22, 2015.
Publications 2015-2016 /12
École d’ingénierie
F. Martel, Y. Dubé, S. Kelouwani and K. Agbossou, « Active thermal battery degradation
management applied to optimal fuel cell PHEV autonomy extension », Vehicle Power
and Propulsion Conference (VPPC) IEEE, VPPC 2016, Hangzhou, China, October
17-20, 2016.
O. Trigui, Y. Dubé, S. Kelouwani and K. Agbossou, « Comparative estimation of electric
vehicle rolling resistance coefficient in winter conditions », Vehicle Power and
Propulsion Conference (VPPC) IEEE, VPPC 2016, Hangzhou, China, October 17-20,
2016.
X.T. Pham, N.H. Vu, V. François, and J.-C. Cuillière, « Modeling and numerical
simulation of multi-layered fiber-reinforced materials applied for non-rigid parts
deformation during assembly process », actes du 7ème colloque québécois sur le
développement numérique de produits, Montreal, May 4, 2016.
M. Rebai, S. Kelouwani, Y. Dubé and K. Agbossou, « Intelligent blended hydrogen-
gasoline generator emission/efficiency characterization in context of EV range
extension », Vehicle Power and Propulsion Conference (VPPC) IEEE, VPPC 2016,
Hangzhou, China, October 17-20, 2016.
D.-H. Vega, S. Kelouwani and L. Boulon, « Efficient Internal Resistance and Specific
Heat Identification of Li-Ion Battery at Low Temperature Conditions », IEEE Vehicle
Power and Propulsion Conference (VPPC), p.1-6, October 2015.
S. Kelouwani, K. Agbossou and Y. Dubé, « Fuel-cell and Battery Hybrid Source Optimal
Power Management for Electric Mobility », 29th Electric Vehicle Symposium (EVS29),
Montreal, Quebec, Canada, June 19-22, 2016.
S. Kelouwani, Y. Dubé, K Agbossou and K. Maalej, « Intelligent battery charging
schedule during a long trip for electric vehicles », IEEE Intelligent Vehicles Symposium
IV2016 The IEEE Intelligent Transportation Systems Society Conference Management
System, Gothenburg, Sweden, June 19-22, 2016.
L.-J. Kere, S. Kelouwani, K. Agbossou, Y. Dubé and F. Martel, « Internal Model Control
of a Hydrogen-Fueled Genset for HEV Applications », IEEE Vehicle Power and
Propulsion Conference (VPPC), IEEE, VPPC 2015 in Montreal, Quebec, Canada,
October 19-22, 2015.
F. da Costa Lopes, S. Kelouwani, L. Boulon, K. Agbossou, N. Marx and K. Ettihir,
« Neural Network Modeling Strategy Applied to a Multi-Stack PEM Fuel Cell System »,
IEEE Transportation Electrification Conference and Expo (ITEC), Metro Detroit,
Michigan, USA, June 14-17, 2016.
Publications 2015-2016 /13
École d’ingénierie
N. Henao, S. Kelouwani, K. Agbossou and Y. Dubé, « Active Power Load Modeling
Based on Grid Voltage and Appliance Impedance Uncertainties », IEEE International
Symposium on Industrial Electronics (ISIE-2016), Santa Clara, USA, June, 2016.
D. Koffi, F. Mijiyawa, F. Erchiqui, B. Kokta and L. Toubal, « Simplified method for
calculation of load sharing and heat generation in natural fibers composites and
nanocomposites gears made of birch and polyethylene », Barcelona Conference,
international Journal of Art and Science, Barcelona, June 23, 2015.
J. Delahaigue, J.-F. Châtelain, and G. Lebrun, « Machining of Flax Fibers Reinforced
Polymer Composite », 1st International Conference on Materials Design and
Applications (MDA2016), Porto, Portugal, June 30-July 1, 2016.
E. Ameri, G. Lebrun and L. Laperrière, « A Study of Permeability and Mechanical
Properties of Unidirectional Flax Fiber Reinforced Composites » Proceedings of
Canadian International Conference on Composite Materials (CANCOM2015),
Edmonton, Alberta, Canada, 2015.
M. Habibi, G. Lebrun and L. Laperrière, « Permeability of unidirectional flax
reinforcement bound by a paper made of short flax fiber and kraft pulp », 19ième
Journées Nationales sur les Composites, Lyon-Villeurbanne, France, 2015.
K.-F. Sodoke, L. Toubal and L. Laperrière, « Hygrothermal Effects On Fatigue Behavior
Of Natural Fibers Composites », Proceedings of 20th International Conference on
Composite Materials (ICCM20), Copenhagen, Denmark, 2015.
M. Mejri, L. Toubal, J.-C. Cuillière and V. François, « Experimental study of the effect
of hygrothermal aging on fatigue of a natural fiber composite », 20th International
Conference on Composite Materials, Copenhagen, Danemark, July, 19, 2015.
M. Mejri, L. Toubal, J.-C. Cuillière et V. François, « Comportement en fatigue d’un
composite à fibres naturelles : Polyéthylène/Bouleau », affiche présentée lors du
concours d’affiches 2016 de l’Université du Québec à Trois-Rivières, 22-23 mars 2016.
M. Mejri, L. Toubal, J.-C. Cuillière et V. François, « Comportement en fatigue d’un
composite à fibres naturelles : Polyéthylène/Bouleau ", affiche présentée lors du colloque
du CREPEC, à l’École de Technologie Supérieure, décembre 2015.
M. Mejri, L. Toubal, J.-C. Cuillière et V. François « Comportement en fatigue d’un
composite à fibres naturelles : Polyéthylène/Bouleau », affiche présentée lors du colloque
du CRMR, à l’Université Laval, octobre 2015.
Publications 2015-2016 /14
École d’ingénierie
E. Articles de revue
J. Pontawe Reagan, J.K. Carson, J.T. Agbebavi, D. Klinac and J.E. Swan « Osmotic
Dehydration of New Zealand Chestnuts with and without Shell and Pellicle »,
International Journal of Food Engineering, p. 2194-5764, August 2015.
I. Lakhdhar, B. Chabot and P.J. Mangin, « Optimization of nickel ions removal from
aqueous solutions by chitosan-polyethylene oxide electrospun nanofibers », Water
Resources Management VIII, 196, p. 12, June 2015.
Y. Shi, D. Belosinschi, F. Brouillette, A. Belfkira and B. Chabot, « The Properties of
Phosphorylated Kraft Fibers », J. BioResources, 10:3, p. 4375-4390, 2015.
M.-M. Lemrini, R. Lanouette and G. Michaud, « Interstage fractionation and low
consistency refining for TMP », Part 1: Energy consumption and pulp properties »,
Appita J., 69:1, p. 74-80, January-March, 2016.
M.-M. Lemrini, R. Lanouette and G. Michaud, « Interstage fractionation and low
consistency refining for TMP », Part 2 : Fibre development, Appita J., 69:2, p. 135-141,
April-June, 2016.
M.A. Charfeddine, J.-F. Bloch, É. Boller and P.J. Mangin, « 3D Synchrotron X-ray
microtomography for paper structure characterization of z-structured paper by
introducing micro nanofibrillated cellulose », Nordic Pulp & Paper Research J., 31:2,
p. 218-224, March 2016.
I. Lakhdhar, P.J. Mangin and B. Chabot, « Copper (II) ions adsorption from aqueous
solutions using electrospun chitosan/peo nanofibres : Effects of process variables and
process optimization », J. of Water Process Eng., DOI, 7, p. 295-305, 2015.
N. Henao, K. Agbossou, S. Kelouwani, Y. Dubé and M. Fournier, « Approach in
Nonintrusive Type I Load Monitoring Using Subtractive Clustering », IEEE Transactions
on Smart Grid, 2015. (online earlier access)
B. Doucoure, K. Agbossou and A. Cardenas, « Time Series Prediction using Artificial
Wavelet Neural Network and Multi-resolution Analysis », Elsevier, Renewable Energy,
vol. 92, p. 202-211, 2016.
N. Henao, K. Agbossou, S. Kelouwani, Y. Dubé and M. Fournier, « Approach in Non-
Intrusive Load Monitoring Using Unsupervised Subtractive Clustering », IEEE
Transactions on Smart Grid, vol. 99, 2015. (On line)
Publications 2015-2016 /15
École d’ingénierie
C. Guzman, K. Agbossou and A. Cardenas, « Energetic Macroscopic Representation of
an Electrically Heated Building with Electric Thermal Storage and Heating Control for
Peak Shaving », Energy and Power Engineering (EPE), Scientific Research, vol. 7, no 4,
p. 144-153, 2015.
F. Amara, K. Agbossou, A. Cardenas, S. Kelouwani and Y. Dubé, « Comparison and
Simulation of Building Thermal Models for Effective Energy Management », Journal :
Smart Grid and Renewable Energy Earth & Environmental Sciences/Engineering
Journals SCIRP , vol. 6, p. 95-112, 2015.
M. H. Cano, K. Agbossou, S. Kelouwani and Y. Dubé, « Power Management System for
off-grid hydrogen production based on uncertainty », International Journal of Hydrogen
Energy, vol. 40, no 23, p. 7260-7272, 2015.
A. Cardenas, K. Agbossou and N. Henao, « Development of Power Interface with FPGA
based Adaptive Control for PEM-FC System », IEEE Transactions on Energy
Conversion, vol. 30, no 1, p. 296-305, 2015.
J. Jaguemont, L. Boulon and Y. Dubé, « Thermal Management of an Unplugged Electric
Vehicle in Cold Weather », IEEE Transactions on Energy Conversion.
J. Jaguemont, L. Boulon, Y. Dubé, P. Venet and A. Sari, « Lithium Ion Battery Aging
Experiments At Sub-Zero Temperatures And Model Development For Capacity Fade
Estimation », IEEE Transactions on Vehicular Technology.
J. Jaguemont, L. Boulon and Y. Dubé, « Characterization and modeling of a Hybrid
Electric Vehicle Lithium – Ion Battery at Low Temperature », IEEE Transactions on
Vehicular Technology, vol. 65, no 1, p. 1-14, 2016.
J. Jaguemont, L. Boulon and Y. Dubé, « A Comprehensive Review on Lithium Ion
Batteries used in Hybrid and Electric vehicle under Cold Temperature », Elsevier Applied
Energy, vol. 164, p. 99-114, 2016.
S. Fukuhara, N. Marx, K. Ettihir, L. Boulon, Y. Ait-Amirat, and M. Becherif, « A
Lumped fluidic model of an anode chamber for fault tolerant strategy design », Elsevier
International Journal of Hydrogen Energy, vol. 41, no 9, p. 5037-5057, 2016.
N. Marx, D. Toquica, L. Boulon, F. Gustin and D. Hissel, « Degraded mode operation of
multi-stack fuel cell systems », IET Electrical Systems in Transportations (disponible sur
IEEE Xplore), vol. 6, p. 3-11, 2016.
K. Ettihir, L. Boulon and K. Agbossou, « Optimization-based energy management
strategy for a fuel cell/battery hybrid power system », Elsevier Applied Energy, vol. 163,
p. 142-153, 2016.
Publications 2015-2016 /16
École d’ingénierie
M. Becherif, F. Claude, T. Hervier and L. Boulon, « Multi-stack fuel cells powering a
vehicle », Elsevier Energy Procedia, vol. 74, p. 308-319, 2015.
J. Xiao, R. Li, P. Bénard and R. Chahine, « Heat and mass transfer model of
multicomponent adsorption system for hydrogen purification », International Journal of
Hydrogen Energy 2015, vol. 40, p. 4794-4803.
J. Xiao, P. Bénard and R. Chahine, « Adsorption-desorption cycle thermodynamics for
adsorptive hydrogen storage system », International Journal of Hydrogen Energy 2015.
http://dx.doi.org/10.1016/j.ijhydene.2015.11.024
J. Xiao, Y. Peng, P. Bénard and R. Chahine, « Thermal effects on breakthrough curve of
pressure swing adsorption for hydrogen purification », International Journal of Hydrogen
Energy 2015. http://dx.doi.org/10.1016/j.ijhydene.2015.11.126
X. Ji, W.-P. Zhu, and D. Massicotte, « Transmit Power Minimization for Two-Way
Amplify-and-Forward Relaying with Asymmetric Traffic Requirements », IEEE
Transactions on Vehicular Technology, February 2016. (accepted)
X. Ji, W.-P. Zhu, and D. Massicotte, « Transmit Power Allocation for Asymmetric Bi-
Directional Relay Networks Using Channel Statistics », IET Communications, vol.9,
no 13, p. 1649-1660, August, 2015.
D. Komljenovic, G. Abdul-Nour, M. Gaha, C. Langheit and M. Bourgeois, « Risks of
Extreme and Rare Events in Asset Management », Journal of Safety Science, vol. 88,
p. 129-145, 2016.
D. Komljenovic, G. Abdul-Nour and N. Popovic, N., Подход к стратегическому
планированию и управлению активами в горной промышленности с учетом
сложности производственно-хозяйственных систем, Горное дело, no 1 (7), p. 1-14,
2016.
M. Elbounjimi, G. Abdul-Nour and D. Ait- Kadi, « A Mixed integer linear programming
model for the design of remanufacturing closed–loop supply chain network »,
International Journal of Supply and Operations Management, IJSOM, vol. 2, no 3,
November 2015.
J. St-Pierre, L. Foleu, G. Abdul-Nour, S. Nomo and M. Fouda, « SME Development
Challenges in Cameroon: An Entrepreneurial Ecosystem Persperctive », Transnational
Corporations Review, vol. 7, no 4, p. 425-446, December 2015, www.tnc-online.net,
C. Lavoie and G. Abdul-Nour, « How to define a creative SME », IFAC-Papers Online,
vol. 48, no 3, p. 1-2444, Edited by Alexandre Dolgui, Jurek, Sasiadek and Marek
Zaremba, 2015. (disponible à www.ScienceDirect.com, ELSEVIER)
Publications 2015-2016 /17
École d’ingénierie
A. Aroua and G. Abdul-Nour, « Forecast Emergency Room Visits- A Major Diagnostic
categories based Approach », International Journal of Metrology and Quality
Engineering. vol. 6, no 2, article 204, 17 pages, 2015.
D. Komljenovic, G. Abdul-Nour and Dr N. Popovic, « An Approach for Strategic
Planning and Asset Management in Mining Industry in the Context of Business and
Operational Complexity », International Journal of Mining and Mineral Engineering
(IJMME), vol. 6, no 4, p. 338-360, 2015. (traduit en Russe)
S. Nadeau, J.-P. Kenné, B. Emami-Mehrgani and A. Badri, « A New Tool to Guide the
Effort of Businesses to Integrate Equipment Lockout/Tagout, Determination of Actual
Production Capacity and Production/Maintenance Planning » Safety Science Monitor,
2016. (accepté pour publication)
C. Baril, V. Gascon, J. Miller, N. Côté and S. Cartier, « Use of a discrete-event
simulation in a Kaizen event: a case study in healthcare », European Journal of
Operational Research, vol. 249, no 1, p. 327-339, 2016.
D. Bourassa, F. Gauthier and G. Abdul-Nour « Equipment failures and their contribution
to industrial incidents and accidents in the manufacturing industry », Journal of
Occupational Safety and Ergonomics, vol. 22 no 1, 2016.
J.-C. Cuillière, V. François and R. Lacroix, « A new approach to automatic and a priori
mesh adaptation around circular holes for finite element analysis », Computer Aided
Design, vol. 77, p. 18-45, 2016 (doi : 10.1016/j.cad.2016.03.004)
S.S. Karganroudi, J.-C. Cuillière, V. François and S.A. Tahan, « Automatic fixtureless
inspection of non-rigid parts based on filtering registration points », The International
Journal of Advanced Manufacturing Technology, 2016.
(doi : 10.1007/s00170-016-8496-5)
F. Martel, Y. Dubé, S. Kelouwani, J. Jaguemont and K. Agbossou, « Long-term
assessment of economic plug-in hybrid electric vehicle battery lifetime degradation
management through near optimal fuel cell load sharing », Journal of Power Sources,
vol. 318, p. 270-282, June 2016.
L.-J. Kere, S. Kelouwani, K. Agbossou, Y. Dubé, N. Henao and R. Courteau,
« Improving efficiency through adaptive internal model control of hydrogen-based genset
used as a range extender for electric vehicle », IEEE Transactions on Vehicular
Technology, 2016. (accepted)
L. J. Kere, S. Kelouwani, K. Agbossou, Y. Dubé, « Adaptive internal model control of
hydrogen-based genset used as range extender for electric vehicle », IEEE Transactions
on Vehicular Technology, vol. PP, no 99 2015. (accepted)
Publications 2015-2016 /18
École d’ingénierie
F. Martel, S. Kelouwani, N. Henao, K. Agbossou, Y. Dubé and L. Boulon, « Optimal
economy-based battery degradation management strategy for hybrid electric vehicle
applications », Journal of Power Sources, Elsevier vol. 274, p. 367-381, 2015.
K. Maalej, S. Kelouwani, K. Agbossou, Y. Dubé and N. Henao, « Long trip optimal
energy planning with online mass estimation for battery electric vehicles », Vehicular
Technology, IEEE Transactions on , vol. 64 (11), p. 4929-4941, November 2015.
D. Koffi, A. Bravo, L. Toubal and F. Erchiqui, « Optimized use of cooling holes to
decrease the amount of thermal damage on a plastic gear tooth », Sage : Advances in
Mechanical Engineering, vol. 8 (5), p. 1-13, 2016.
A. Bravo, D. Koffi, L. Toubal and F. Erchiqui, « Life and damage mode modeling
applied to plastic gears », Elsevier : Engineering Failure Analysis, vol. 58 (1),
p. 113-133, 2015.
M. Habibi, L. Laperrière, G. Lebrun and B. Chabot B, « Experimental Investigation of
the Effect of Short Flax Fibers on the Permeability Behavior of a New Unidirectional
Flax/Paper Composite », June 18, 2016. (accepted for publication in Fibers)
F. Sodoke, L. Laperrière, L. Toubal and SK Reza, « Fuzzy logic response to Young's
modulus characterization of a flax-epoxy biocomposite material », Elsevier : Materials
and design, vol. 89, p. 273-285, 2016.
E. Ameri, L. Laperrière and G. Lebrun, « Mechanical characterization and optimization
of a new unidirectional flax/paper/epoxy composite », Composites Part B, vol. 97,
p. 282-291, 2016.
E. Ameri, G. Lebrun and L. Laperrière, « In-plane permeability characterization of a
unidirectional flax/paper reinforcement for liquid composite molding processes »,
Composites Part A, vol. 85, p. 52-64, 2016.
S.B. Ghafarizadeh, G. Lebrun and J.-F. Châtelain J.-F., « Experimental investigation of
the cutting temperature and surface quality during milling of unidirectional carbon fiber
reinforced plastic », Journal of Composite Materials, vol. 50, no.8, p. 1059-1071, 2016.
S.B. Ghafarizadeh, A.M. Tahvilian, J.-F. Châtelain, Z. Liu, H. Champliaud and
G. Lebrun, « Numerical simulation of ball-end milling with SPH method », Int J Adv
Manuf. Technol. (DOI : 10.1007/s00170-016-8811-1)
M. El Boustani, F. Brouillette, G. Lebrun and A. Belfkira, « Solvent-free acetylation of
lignocellulosic fibers at room temperature: Effect on fiber structure and surface
properties », Journal of Applied Polymer Science, vol. 132 (29), 2015.
Publications 2015-2016 /19
École d’ingénierie
SB Ghafarizadeh, J.-F. Châtelain and G. Lebrun, « Finite element Analysis of surface
milling of carbon fiber reinforced composites », International Journal of Advanced
Manufacturing Technology, p. 1-11, February 22, 2015.
H. Lessard, G. Lebrun, A. Benkaddour and X.-T. Pham, « Influence of process
parameters on the thermostamping of a [0/90]12 carbon/polyether ether ketone
laminate », Composites: Part A, vol. 70, p. 59-68, 2015.
SB Ghafarizadeh, J.-F. Châtelain and G. Lebrun, « Effect of cutting tool lead angle on
machining forces and surface finish of CFRP laminates », Science and Engineering of
Composite Materials (SECM), April, 2015. (DOI : 10.1515/secm-2013-0188)
A. Bravo, L. Toubal, D. Koffi and F. Erchiqui, « Damage characterization of bio and
green polyethylene-birch composites under creep and cyclic testing with multivariable
acoustic emission », MDPI : Materials, vol. 8 (11), p. 7322-7341, 2015.
L. Toubal, J.-C. Cuillière, K. Bensalem, V. François and P.-B. Gning, « Hygrothermal
Effect on Moisture Kinetics and Mechanical Properties of Hemp/Polypropylene
Composite : Experimental and Numerical Studies », Wiley : Polymer Composites, 2015.
(DOI : 10.1002/pc.23414)
A. Bravo, L. Toubal, D. Koffi and F. Erchiqui, « Development of novel green and
biocomposite materials : Tensile and flexural properties and damage analysis using
acoustic emission », Elsevier : Materials and design, vol. 66, p. 16-28, 2015.
F. Autres réalisations
C. Bates et B. Chabot, « Nanofibres électrofilées de chitosane pour l’adsorption des
métaux lourds de solutions aqueuses : étude de la cinétique et optimisation du pouvoir
adsorbant », Rapport de stage, Universidad Autónoma de Yucatán (UADY), Mexico,
19 pages, juillet 2015.
A. Landes et B. Chabot, « Exécuter des expériences de laboratoire pour fabriquer des
nanofibres électrofilées et des essais d'adsorption de contaminants divers », Rapport de
stage, Université Toulouse III - Paul Sabatier, France, 33 pages, juillet 2015.
B. Chabot, « Biobased electrospun nanofibers for recovery of precious metals from e-
waste liquid streams », Adjacent Government, March, 2016.
B. Chabot, « A new bio-based sorbent for water and wastewater treatment applications »,
Adjacent Government, August, 2015.
A.R. Kulkarni, R. Lanouette and É. Loranger, « Tempo oxidation impact on fractions of
thermomechanical pulp », Rapport de stage, 34 pages, October 2015.
Publications 2015-2016 /20
École d’ingénierie
D. Myja, É. Loranger et R. Lanouette, « Étude de l'oxydation TEMPO sur une pâte
thermomécanique pour la fabrication de films de nanocellulose », Note de recherche du
CRMR, 3-4, mars 2016.
D. Myja, É. Loranger et R. Lanouette, « Impact de l'oxydation TEMPO lors de la mise en
pâte thermomécanique », M. Sc. en sciences et génie des matériaux lignocellulosiques
(bidiplomation-UQTR-ESCOM), Université du Québec à Trois-Rivières, Canada,
89 pages, janvier 2016.
L. Cherpozat et É. Loranger, « Élaboration d'un nanocomposite à base de cellulose et de
pyrrole », Rapport de stage, Université de Lorraine, France, 45 pages, juillet 2015.
A. Fedou et É. Loranger, « Développement et analyse par GC FID/TCD des gaz
provenant de la pyrolyse du bois », Rapport de stage, Université Toulouse III - Paul
Sabatier, France, 36 pages, juillet 2015.
J. Klein et É. Loranger, « Développement de composites à base de nanocellulose pour
utilisation de pointe », Rapport de stage, Université de Lorraine, France, 54 pages, juillet
2015.
C. Campan, P.J. Mangin et C. Villemont, « Valorisation de la biomasse forestière dans
une optique durable », Rapport de stage, Université Toulouse III - Paul Sabatier, France,
92 pages, juillet 2015.
A. Le Brettevillois, P.J. Mangin et M.A. Charfeddine, « Comparaison des méthodes
d'ajout de la micro-nano cellulose fibrillée dans un papier TMP », Rapport de stage,
Université Toulouse III - Paul Sabatier, France, 49 pages, juillet 2015.
T. Jabrane, P.J. Mangin et M. Dubé, « Méthodologies de fabrication de papier bioactif »,
Ph. D. en sciences et génie des matériaux lignocellulosiques, Université du Québec à
Trois-Rivières, Canada, 215 pages, juillet 2015.
K. Agbossou, « Tensions parasites», Rapport annuel au Ministère de l'Agriculture, des
Pêcheries et de l'Alimentation du Québec (MAPAQ), (12 pages) 2016.
K. Agbossou, S. Kelouwani and Y. Dubé, « Système adaptatif de réduction des émissions
de NOx et de Cox d’une génératrice embarqué sur un véhicule électrique basse vitesse »,
Rapport pour le Bureau de l’efficacité et de l’innovation énergétiques, (73 pages), mars
2016.
K. Agbossou, et A. Cardenas « Outils pour la gestion intelligente de la demande locale
dans les systèmes hybrides résidentiels et institutionnels » Rapport pour le Bureau de
l’efficacité et de l’innovation énergétiques, (110 pages), mars 2016.
Publications 2015-2016 /21
École d’ingénierie
K. Agbossou, « Tensions parasites », Rapport annuel au Ministère de l'Agriculture, des
Pêcheries et de l'Alimentation du Québec (MAPAQ), (14 pages) 2015.
K. Agbossou, Article dans le journal télévisé Radio-Canada Mauricie « L'éolienne de
l'UQTR reprend sa place dans le ciel », Journal du soir, 10 mars 2016.
K. Agbossou, Article dans l’Entête, revue d’information de l’UQTR, « Échanges
enrichissants sur le thème des énergies renouvelables», 11 novembre 2015. Article relatant
le succès du colloque sur les énergies renouvelables et la production décentralisée. Repris
sur le site web du réseau UQ : http://www.uquebec.ca/reseau/fr/contenu/echanges-
enrichissants-sur-le-theme-des-energies-renouvelables
J. Jaguemont, L. Boulon et Y. Dubé, « Comportement des cellules Li-Ion en conditions
hivernales », Rapport Interne IRH – Posi+ tech., 35 pages, novembre 2015.
G. Abdul-Nour, S. Gamache et M. Khéfacha, « Optimisation de la chaîne de valeur »,
Antirouille Métropolitaine, Longueuil, 2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Ultratainer, St-Jean
sur Richelieu, 2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », NITA, Terrebonne,
2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Novatech,
Beauceville, 2015.
G. Abdul-Nour et K. Nouri, « Optimisation de la chaîne de valeur », LS Bilodeau Inc., St-
Éphrem-de-Beauce, 2015.
G. Abdul-Nour et K. Nouri, « Optimisation de la chaîne de valeur », Ro-Main., St-Bernard-
de-Beauce, 2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », AX-Découpe,
Terrebonne, 2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Fenêtre Concept,
Terrebonne, 2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Les Portes baril,
Victoriaville, 2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Caron et Fils,
Coaticook, 2015.
Publications 2015-2016 /22
École d’ingénierie
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Quessy, St-Jean-
des-Piles, 2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », ACM Composites,
Drummondville, 2015.
G. Abdul-Nour et K. Nouri, « Optimisation de la chaîne de valeur », Planage 2000,
Shawinigan-Sud, 2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Atelier tangente,
Rouyn-Noranda, 2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Cultures de Chez-
Nous, Sainte-Brigitte-des-Saults, 2015.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Quessy, Mecart,
Saint-Augustin-de-Desmaures, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Les Paniers P&P,
Saint-Pierre-Les-Becquets, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Créations Verbois,
Rivières-du-Loup, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Kongsberg, Grand-
Mère, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Les Industries PF,
Saint-Martin de Beauce, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », CCI Métallisation
inc, Trois-Rivières, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Peinture Turcotte
(2), Trois-Rivières, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur »,
9061-7457 Québec Inc, Prodige, Joliette, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Dispo-Med,
Joliette, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Ébénisterie R.N.,
Saint-Marc-de-Figuery, 2016.
Publications 2015-2016 /23
École d’ingénierie
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Roberge et fils, La
Sarre, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Radiateur J.M.T,
La Sarre, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », HDI, Grand-Mère,
2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Zed-Bed, Grand-
Mère, 2016.
G. Abdul-Nour et S. Gamache, « Optimisation de la chaîne de valeur », Camion Carl
Thibault, Pierreville, 2016.
G. Abdul-Nour, « Cartographie de Chaine de valeur, Ateliers de formation », conseillers de
DEC Canada, Trois-Rivières et Québec, 12 janvier 2016.
G. Abdul-Nour, « Lean Six-Sigma », Ateliers, Rencontres francophones sur la qualité et la
mesure, RFQM 2015, Angers, France, 28 au 30 avril 2015. (sur invitation)
G. Abdul-Nour, « Diplômer, travailler», Colloque Étudiant(e)s des cycles supérieurs, AGE,
UQTR, 19 janvier 2016.
G. Abdul-Nour, « Cartographie de chaîne de valeur », Ateliers, Réunion annuelle des
conseillers de MAPAQ, Lévis, Québec, 4 juin 2015. (sur invitation)
F. Gauthier, Y. Chinniah, D. Burlet-Vienney, B. Aucourt et S. Larouche,
« Expérimentation pratique d’outils et de paramètres d’estimation du risque appliquées à la
sécurité des machines », Études et recherches, Institut de Recherche Robert-Sauvé en santé
et en sécurité du travail du Québec, Montréal, 95 pages, 2016.
V. François and J.-C. Cuillière, « Teaching platform for mechanical engineering », 3rd
update, Code_Aster ProNet , March 2016.