Publication

PRODUCT PROGRAMME

TEXTILE AUXILIARIES

ZSCHIMMER & SCHWARZ

32

CONTENTS

1 PRODUCTS FOR SPINNING

1.1 LUBRICANTS

1.2 ADDITIVES FOR LUBRICANTS

1.3 SPECIAL PRODUCTS

2 TWISTING AND WEAVING (WEFT) LUBRICANTS

3 WET PARAFFINATING AGENTS

4 WARP WAXING / COLD SIZING AGENTS

5 LUBRICANTS FOR TEARING PROCESSES

1 SEQUESTERING AGENTS, WATER TREATMENT

2 DETERGENTS

3 WETTING AGENTS

4 SCOURING AGENTS

5 BLEACHING AGENTS

5.1 BLEACHING COMPOUNDS

5.2 STABILISERS

5.3 PEROXIDE KILLER

6 MISCELLANEOUS

6.1 STAIN REMOVERS

6.2 ANTI-YELLOWING AGENTS

YARN AND FABRIC MANUFACTURE

PRETREATMENT

1 DISPERSING AGENTS

2 SEQUESTERING AGENTS

3 pH REGULATING AGENTS / BUFFERING AGENTS / ALKALI AND ACID DONORS

4 WETTING AGENTS / DEAERATORS / PADDING AUXILIARIES

5 LEVELLING AGENTS / DYE CARRIERS

5.1 POLYESTER

5.2 POLYAMIDE

5.3 WOOL

5.4 CELLULOSE

6 CREASE PREVENTING AGENTS

7 AFTERTREATMENT AGENTS

7.1 POLYESTER

7.2 POLYAMIDE

7.3 CELLULOSE

7.4 SILK

7.4 WOOL

8 CARPET COLORATION

9 MISCELLANEOUS

DYEING AND PRINTING

FINISHING/ COATING 1 SOFTENERS

1.1 OVERVIEW

1.2 PRODUCT DESCRIPTION

2 WATER- AND OIL-REPELLENT AGENTS

3 FLAME RETARDANTS

4 STIFFENING AGENTS/ DISPERSIONS

5 PRODUCTS FOR BACK COATING OF TUFTED CARPETS

6 DEFOAMERS

7 CROSSLINKERS

8 SPECIAL FINISHING PRODUCTS

CONTENTS

4 5


1 PRODUCTS FOR SPINNING

2 TWISTING AND WEAVING (WEFT) LUBRICANTS

3 WET PARAFFINATING AGENTS

4 WARP WAXING / COLD SIZING AGENTS

5 LUBRICANTS FOR TEARING PROCESSES

ZSM

ZSCHIMMER & SCHWARZ

MOHSDORF GmbH & Co KG

Chemnitztalstr.109217 BURGSTÄDT/GERMANYTel.: +49 3724 [email protected] www.zsm.de

ZST

ZSCHIMMER & SCHWARZZ E TA E S S E T I S . r. l .

Via Angelo Ariotto, 1/B13038 TRICERRO (VERCELLI)/ITALYTel.: +39 0161 80 86 [email protected] www.zetaesseti.it

6

1. PRODUCTS FOR SPINNING 1.1 Lubricants

7

Application field Product Characteristics Chemical composition/Ionicity

Appearance Origin

carded yarn spinning of wool and its blends with synthetic fibres

CELLANA AC3 free of mineral oils, well balanced lubricity, cohesion and antistatic properties, non-yellowing

combination of fatty acids derivates

anionic

clear,

yellow liquid

ZST

carded and semi-worsted yarn spinning of cashmere and its blends with natural and synthetic fibres

CELLANA PRS free of mineral oils, well balanced lubricity, cohesion and antistatic properties, non-yellowing


anionic

clear,

yellow liquid

ZST

carded and semi-worsted yarn spinning, specifically for coarse wool and natural fibres

CELLANA VAW contains mineral oils, imparts excellent lubricity, dust binding, non-yellowing, corrosion inhibiting

hydrocarbons and fatty alcohol ethoxylates

non-ionic

clear,

light yellow liquid

ZSM

glass fibre manufacturing, carded yarn spinning, for wool and mixtures with synthetic fibres

CELLANA VS 12 contains mineral oils, imparts excellent lubricity and anti-electrostatic properties, dust binding, corrosion inhibiting

hydrocarbons and fatty alcohol ethoxylates, antielectrostatic agents

slightly anionic

clear,

light yellow liquid

ZSM


8 9


Appearance Origin

worsted and semi-worsted yarn spinning, for all fibre types

FLEROL KFN conc free of mineral oils, low fibre/metal friction, very good lubricity and anti-electrostatic properties, non-yellowing, corrosion inhibiting, readily removable by washing

polyglycol ether and fatty acid ethoxylates

non-ionic

clear,

yellow liquid

ZSM

worsted and semi-worsted yarn spinning, for all fibre types

FLEROL KFC free of mineral oils, high dynamic lubricity, low interfibre cohesion, good anti-electrostatic properties, highly concentrated, readily removable by washing

polyglycol ester

non-ionic

clear yellowish-brown liquid ZSM

worsted yarn spinning, for fine wool with high count yarn

FLEROL FNE free of mineral oils, very good antistatic and cohesion properties, low fibre/metal friction, non-yellowing


anionic

clear,

yellow liquid

ZST

worsted yarn spinning, for medium and fine wool when a good cohesion is requested

FLEROL MX21 free of mineral oils, well balanced lubricity, cohesion and antistatic properties, non-yellowing


anionic

clear,

yellow liquid

ZST

worsted and semi-worsted yarn spinning, for ordinary and medium wool and its blend with synthetic fibres, special for non-shrink wool

FLEROL PLM free of mineral oils, very good antistatic and cohesion properties, low fibre/metal friction, non-yellowing


anionic

clear,

yellow liquid

ZST

worsted and semi-worsted yarn spinning, for wool and its blends with synthetic fibres

FLEROL PB18 free of mineral oils, very good antistatic and cohesion properties, low fibre/metal friction, non-yellowing

combination of fatty acids and antistatic

anionic

clear,

yellow liquid

ZST

lubricant for the processing of cotton affected by honey dew

FLEROL BW eliminates sticking of cotton from honey dew

polyglycol ether and fatty acid ethoxylate

non-ionic

clear,

yellowish liquid

ZSM

1. PRODUCTS FOR SPINNING 1.1 Lubricants


10 11


Appearance Origin

anti-electrostatic agent for wool, silk and acrylic fibres and its blends; for all spinning processes

VOLTURIN LH05 very good antistatic properties, non-yellowing

alkyl phosphate

anionic

clear,

yellow liquid

ZST

anti-electrostatic agent for synthetic fibres; for all spinning processes

VOLTURIN TP 3000

excellent anti-electrostatic effects, well-balanced stick/slip properties, stable in fixing processes

alkyl phosphate

anionic

clear,

colourless liquid

ZSM

anti-electrostatic agent for acrylic fibres; for open-end spinning

ELACTIV QD25 very good antistatic properties, dust binding, non-yellowing

derivate of amine quaternizated

cationic

clear,

yellow liquid

ZST

anti-electrostatic agent for acrylic fibres; for all spinning processes

ELACTIV ZTLN very good antistatic and cohesion properties, dust binding, non-yellowing

mixture of vegetal and ethoxylate derivates

cationic

white emulsion ZST

anti-electrostatic agent for wool, silk and acrylic fibres and its blends; for all spinning processes

CONDISOL GP increase and preserve the humidity on the fibres in adverse environmental conditions

ethoxylate compound

non-ionic

clear,

colourless liquid

ZST

high cohesion agent for natural fibres and its blends; for all spinning processes

SILSOL 130 strong cohesion power, improves adhesiveness between threads

colloidal silica in aqueous dispersion

anionic

white emulsion ZST

high cohesion agent for natural fibres and its blends; for all spinning processes

SILSOL 330 high cohesion power, improves adhesiveness between threads, preserve the hand of fabrics


anionic

translucent liquid ZST

mothproofing agent; for all spinning processes also for dyeing application

ZS-PROTECT ATN compatible with lubricants and antistatic agents

synthetic pyrethrum derivate

non-ionic

clear,

yellow liquid

ZST

1. PRODUCTS FOR SPINNING 1.2 Additives for Lubricants


12 13


Appearance Origin

manufacture of polypropylene tapes for packaging material and tufted carpet backs

FLEROL PP excellent lubricity, good anti-electrostatic effect, based on raw materials according to FDA, biodegradable

polyglycol ester

non-ionic

clear,

yellowish liquid

ZSM

lubrication of raw wool after washing in combing process

FLEROL CS 45 free of mineral oils, well balanced lubricity, cohesion and antistatic properties, non-yellowing

combination of fatty acids and polyoxyethylene

anionic

clear,

yellow-brown liquid

ZST

lubrication of raw wool after washing in combing process with too short fibres

FLEROL ELE conc free of mineral oils, excellent cohesion power, highly concentrated, non-yellowing

combination of fatty acids ethoxylated

slightly anionic

clear,

yellow liquid

ZST

carded yarn spinning of synthetic fibres and for needle felt articles

FLEROL MWB free of mineral oils, well balanced lubricity, cohesion and antistatic properties, non-yellowing

combination of fatty acids ethoxylated

anionic

clear,

yellow liquid

ZST

carded yarn spinning synthetic fibres, open-end process

FLEROL SIL silicon based oils, highly lubricant power

mixture of silicone oils

non-ionic

white emulsion ZST

component for manufacturing of sizing agents for glass fibres

FLEROL 07-1015 smoothing and wetting properties, compatible with film forming agents (e.g. epoxy resins)

fatty acid polyglycol ether

non-ionic

turbid,

high viscous

ZSM

1. PRODUCTS FOR SPINNING 1.3 Special Products


14 15

Application field ProductW Characteristics Chemical composition/Ionicity

Appearance Origin

universal use for all fibre types

TORSINOL ZSB very good lubricity, dust binding, antielectrostatic, corrosion inhibiting, easy to remove by washing

hydrocarbons and fatty acid ethoxylate

non-ionic

slightly yellowish,

clear liquid

ZSM

universal use for all fibre types

TORSINOL EF very good lubricity, dust binding, antielectrostatic, corrosion inhibiting, suitable for white yarns

hydrocarbons and fatty acid ethoxylate

non-ionic

nearly colourless,

clear liquid

ZSM

2. TWISTING AND WEAVING (WEFT) LUBRICANTS


16 17


Appearance Origin

specifically for yarns made of cellulosic fibres and their mix-tures with synthetic fibres and acrylic yarns

KATAMIN BW high yarn lubricity and anti-electrostatic property, low amount of paraffins, non-resinifying at higher temperatures, retains hydrophilic nature of cotton

polyethylene, paraffin, fatty alcohol and emulsifiers

cationic

white emulsion ZSM

universal application to yarns of all fibre types

KATAMIN UNI very high lubricity and anti-electrostatic property, uniform distribution over the whole bobbin, easy handling, excellent smoothness

paraffin and emulsifiers

cationic

white emulsion ZSM

specifically for yarns made of cellulosic fibres and their mix-tures with synthetic fibres

KATAMIN GL high yarn lubricity and anti-electrostatic property, soft handle, non-resinifying at higher temperatures

polyethylene, paraffin, emulsifiers and special additives

cationic

white emulsion ZSM

for yarns of all fibre types KATAMIN GV combination of softening and smoothing agents, bulky handle, good anti-electrostatic property

polyethylene, paraffin, fatty acid condensation products

anionic

beige coloured emulsion ZSM

carded spinning of wool and its blends with synthetic fibres for knitted yarn

KATAMIN EP high yarn lubricity property, non-resinifying at higher temperatures

paraffin emulsion

non-ionic

white emulsion ZST

specifically for yarns made of wool fibres and their mixtures with synthetic fibres

KATAMIN PEB high yarn lubricity and antistatic power, non-resinifying at higher temperatures

paraffin emulsion

cationic

white emulsion ZST

3. WET PARAFFINATING AGENTS


18 19


Appearance Origin

wool fibres and its blend ENSIMOL BC warp waxing agent with good antistatic properties, reduce the formation of dust deposits, easily removable by washing

polymer with high molecular weight

anionic

clear, yellow liquid

ZST

silk fibres and its blend ENSIMOL SILK warp waxing agent with good antistatic properties, reduce the formation of dust deposits, easily removable by washing

combination of resins and cohesive agents

anionic

clear, yellow liquid

ZST

wool, wool/polyester, sizing additive, overwaxing agent

ENSIMOL FWA warp waxing agent with good smoothing and anti-electrostatic properties, very easy to remove by washing, biodegradable

fatty acid ethoxylate, anti-electrostatic additives

anionic

clear, yellowish up to brownish liquid

ZSM

synthetic fibres and their mixtures

ENSIMOL KW conc

warp waxing agent with excellent anti-electrostatic properties, good dust binding capability, very easy to remove by washing

polyglycol ether and fatty alcohol ethoxylate

non-ionic

clear,

light yellow liquid

ZSM

additive for sizing and finishing liquors, overwaxing agent for warps wool and cotton

ENSIMOL B 60 highly viscous additive for warp waxing or sizing agents, applicable without pre-dissolving, increases the flexibility of sizing films

fatty acid ethoxylate

non-ionic

light yellow,

turbid liquid of very high viscosity

ZSM

4. WARP WAXING / COLD SIZING AGENTS


20 21


Appearance Origin

universally applicable to all types of fibres

CELLANA GB mineral oil lubricant, good suppleness and lubricity, dust binding, non-resinifying and corrosion inhibiting

hydrocarbons and fatty acid ethoxylates

non-ionic

clear,

light yellow liquid

ZSM

5. LUBRICANTS FOR TEARING PROCESSES


22 23

PRETREATMENT

1 SEQUESTERING AGENTS, WATER TREATMENT

2 DETERGENTS

3 WETTING AGENTS

4 SCOURING AGENTS

5 BLEACHING AGENTS

6 MISCELLANEOUS

ZSM

ZSCHIMMER & SCHWARZ



ZST



24 25


Appearance Origin

acid demineralisation, bleaching, neutralising

OPTAVON 4UD strong acid complexing agent with excellent sequestering properties, very good stabilising effect in peroxide bleaching, key product for OPTABLEACH

organic phosphorus and carboxylic acid compound

anionic

brown liquid ZSM

desizing, removal of lubricants, alkaline scouring, bleaching, water correction

OPTAVON NW highly efficient complexing and dispersing agent with an excellent binding of calcium, magnesium and iron ions, supports the deterging effect of surfactants, prevents silicate deposits on machinery parts

organic phosphorus compound

anionic

clear,

colourless liquid

ZSM

desizing, removal of lubricants, alkaline scouring, bleaching, water correction

OPTAVON DCS universal applicable sequestering agent with outstanding dispersing properties, supports the detergency of surfactants significantly

organic phosphorus compound, polyacrylate

anionic

clear,

yellowish liquid

ZSM

desizing, removal of lubricants, bleaching

OPTAVON SV prevents precipitation caused by hard water, dispersing of insoluble substances, high soil suspending power

polyacrylate compound

anionic

clear,

yellow liquid

ZSM

acid demineralisation, alkaline scouring, bleaching

OPTAVON MEX excellent sequestering power regarding iron ions and hardness elements, reduction of catalytic damages on the textile goods during hydrogen peroxide bleaching, very good stabilising effect in peroxide bleaching


anionic

brown liquid ZSM

1. SEQUESTERING AGENTS, WATER TREATMENT

PRETREATMENT

26 27


Appearance Origin

desizing, bleaching, alkaline scouring

OPTAVON FE conc water treatment agent for eliminating high iron content of process water or fibres, reduction of catalytic damageson the textile goods during hydrogen peroxide bleaching

combination of polyfunctional organic acids

anionic

yellowish-white powder ZSM

acid demineralisation,bleaching, neutralising,post-extraction

OPTAVON BAG sequestering agent and acid bleach modulator for the economic BLEACH & GO process, combines complexing, dispersing and stabilising agents in one product


anionic

clear,

yellow liquid

ZSM

scouring process of silk OPTAVON F liq water treatment agent for eliminating heavy metals and hearty alkaline

organic sodium salt

anionic

pale yellow liquid

ZST

sequestering agent for bleaching of acrylic fibres with sodium chlorite

OPTAVON CL strong sequestering power, avoid salt deposits, higher degree of whiteness

mixture of inorganic salts and sequestering agent

clear, yellowish liquid

ZST

1. SEQUESTERING AGENTS, WATER TREATMENT

PRETREATMENT

28 29


Appearance Origin

universal deterging and wetting agent

TISSOCYL RLB highly concentrated; excellent emulsifying power for mineral and ester oils, waxes and lubricants; compatible with enzymes

fatty alcohol ethoxylates

non-ionic

clear,

colourless liquid

ZSM

universal detergent for cellulosic and synthetic fibres

TISSOCYL CSB very good oil and fat dissolving pro-perties, high dispersing power


non-ionic

clear,

colourless liquid

ZSM

deterging and wetting agent for pretreatment of cellulosic and synthetic fibres, suitable in jet dyeing machines

TISSOCYL DLF highly concentrated, low-foaming, good detergency and soil suspending power


non-ionic

clear,

colourless liquid

ZSM

deterging and wetting agent for continuous pretreatment of cellulosic fibres and blends with synthetics

TISSOCYL OS-A low-foaming, very good emulsifying properties, ideal for maximum application systems, compatible with enzymes


non-ionic

clear,

colourless liquid

ZSM

universal detergent and wetting agent for all textile processes, manufacturing of dilutions

TISSOCYL CFD conc

highly concentrated, good emulsifying power for mineral and ester oils, waxes and lubricants; low foaming, stable to alkali up to 40 g/l NaOH (flakes)


non-ionic

turbid,

colourless up to light yellowish liquid

ZSM

special detergent and wetting agent for pretreatment of cotton and mixtures

TISSOCYL 4P increasing of rewetting properties after bleaching, good emulsifying po-wer for mineral and ester oils, waxes and lubricants; low foaming


non-ionic

clear up to light turbid liquid ZSM

special detergent for the removal of oily lubricants, in particular silicone oils from elastane containing goods

TISSOCYL RC 9 spontaneous emulsifying of silicone oils, very good emulsifying of lubri-cants, displays maximum emulsifying effect at low temperatures

combination of non-ionic surfactants

non-ionic

clear,

colourless liquid

ZSM

special detergent for the removal of oily lubricants from cellulosic and synthetic fibres

TISSOCYL JT excellent emulsifying of oils, lubricants and warp waxing agents, low foaming

combination of non-ionic surfactants

non-ionic

clear,

colourless liquid

ZSM

2. DETERGENTS

PRETREATMENT

30 31


Appearance Origin

universal rapid wetting agent for pretreatment

NEWALOL PFN excellent wetting properties, lowfoaming, compatible with enzymes

EO-PO adduct, non-ionic clear,

colourless liquid

ZSM

rapid wetting agent for usein the medical field

NEWALOL SPEZIAL quick and even wetting of the goods in acid up to mildly alkaline range, readily rinsable

sulphosuccinate,

anionic

viscous liquid ZSM

rapid wetting agent for non-shrink treatment of wool

NEWALOL CL excellent wetting properties, stable to chlorine

ethoxyl product

non-ionic

clear liquid ZST

3. WETTTING AGENTS

PRETREATMENT


Appearance Origin

highly alkali-resistant wetting agent and detergent for continuous pretreatment of cotton fibres

SINCAL ECO liq very good emulsifying, dispersing and rewetting properties, alkaline stability up to 100 g/l caustic soda flakes, low foaming

alkyl sulphonate, fatty alcohol ethoxylate,

anionic

beige coloured,

high viscous

ZSM

detergent for degumming of silk

SINCAL MARS flakes very good emulsifying, dispersing and rewetting properties

natural fatty acids

anionic

green flakes ZST

detergent for degumming of silk

REDUSCOUR SILK very good emulsifying, dispersing and rewetting properties

fatty alcohol ethoxylate and sequestering agent

anionic

pale yellow liquid ZST

4. SCOURING AGENTS

32 33


Appearance Origin

compound product for discontinuous pretreatment and hydrogen peroxide bleaching of cellulosic fibres and their blends with synthetics

REDUZIN UKB very good washing, emulsifying and dispersing properties, optimal stabilising, low foaming

fatty alcohol ethoxylate, alkylaryl sulphonate, organic phosphorus compounds

anionic

yellowish liquid ZSM

compound product for hydrogen peroxide bleaching of wool fibres and their blends with synthetics

REDUZIN WO bleaching and dyeing in the same bath, reduce the bleaching time, preserve the wool softness

mixture of compounded organic components

anionic

clear,

colourless liquid

ZST

bleaching agent for wool fibres and their blends with synthetics

ZS-CLEANREDOX BFW

bleaching and dyeing in the same bath without hydrogen peroxide, good compatibility with dyestuff

mixture of inorganic reducing and complexing agent

white powder ZST

5. BLEACHING AGENTS 5.1 Bleaching Compounds

PRETREATMENT

34 35


Appearance Origin

universal stabiliser for silicate-free peroxide bleaching

REDUSTAB OS excellent stabilising properties, applicable for discontinuous peroxide bleaching

organic salt

anionic


organic stabiliser for pad-steam peroxide bleaching

REDUSTAB PSR excellent stabilising effects in continuous processes, very high degree of whiteness

organic salts

anionic

brown liquid ZSM

stabiliser for peroxide bleaching of wool and silk fibres

REDUSTAB KOS excellent stabilising properties, ensure regular development ofoxygen throughout treatment

organometallic derivate

anionic

clear,

yellowish liquid

ZST

5. BLEACHING AGENTS 5.2 Stabilisers

PRETREATMENT


Appearance Origin

residual peroxide elimination after the bleaching process to increase the reproducibility of reactive dyeings

REDUZOL THN reducing agent, reasonable price, easy handling, stable in storage

inorganic salt white powder ZSM

residual peroxide elimination after the bleaching process to increase the reproducibility of reactive dyeings

REDUZOL RED mild reducing agent, reasonable price, easy handling and dosable

sulphur derivative clear,

colourless liquid

ZSM

5. BLEACHING AGENTS 5.3 Peroxide Killer

36 37


Appearance Origin

detergent and stain remo-ver for textiles that are badly soiled with fat and grease

DEPICOL TLK liq special washing and emulsifying properties, applicable in long liquor ratios and also suitable for direct application to the stained areas

alkane sulphphonate, fatty alcohol ethoxylate, hydrocarbons

anionic

clear,

colourless liquid

ZSM

highly concentrateddegreasing and washing agent for the scouring ofsynthetic fibres

DEPICOL OBS distinctive extraction power with regard to fats and waxes, excellent oil emulsifying behaviour, very good backstaining properties

fatty alcohol and alkyl amine ethoxylate

non-ionic/ cationic

clear, yellow,

viscose liquid

ZSM

6. MISCELLANEOUS 6.1 Stain Removers

PRETREATMENT


Appearance Origin

anti-yellowing agent designed to reduce yellowing of polyamide and blends with elastane during heat setting and molding

PROTELAN CF 2 prevents yellowing at high tempera-tures during thermosetting, minimi-ses the danger of yellowing caused by contact heat, very good wetting and emulsifying properties

mixture based on antioxidants

non-ionic

clear,

colourless liquid

ZSM

anti-yellowing agent designed to reduce yellowing of polyamide and blends with elastane during heat setting and molding

PROTELAN ATY-P prevents yellowing at high tempera-tures during thermosetting, minimi-ses the danger of yellowing caused by contact heat, low foaming, sui-table for the usage in foam molding processes

carboxylic acid amide white granules ZSM

6. MISCELLANEOUS 6.2 Anti-yellowing Agents

38 39


Appearance Origin

anti-yellowing agent designed to reduce the ther-mal yellowing of cotton/elastane blends

PROTELAN CEL reduces the tendency to yellowing during heat-setting, excellent wetting power, pre-emulsifying of oily preparations and dust

combination of fatty alcohol ethoxylates and special antioxidants

non-ionic

clear up to slightly turbid liquid ZSM

anti-yellowing agent designed to reduce yellowing ofpolyamide and blends with elastane during storage

PROTELAN LG very good yellowing protection, low foaming behaviour

alkyl sulphates

anionic

clear,

light yellow liquid

ZSM

anti-yellowing agent designed to reduce yellowing of polyamide and blends with elastane during storage

PROTELAN LGA excellent yellowing protection, pH adjustment during application is not necessary, low foaming behaviour

alkyl sulphates

anionic

clear,

light yellow liquid

ZSM

special anti-yellowing agent designed to reduce yellowing of polyamide and polyamide/elastane tapes during storage

PROTELAN LGS plus

excellent yellowing protection,low odour -> applicable in hot andopen treatment baths;reduces the danger of spots and brownish discolorations during continuous tape finishing

formulation of alkyl aryl sulphonates and spe-cial additives

anionic

clear,

yellow liquid

ZSM

special anti-yellowing agent designed to reduce yellowing of polyamide and blends with elastane during storage

PROTELAN FM very good yellowing protection, especially suitable for PA fabrics molded together with foam material

formulation of alkyl sulphonates

anionic

clear,

yellow brown liquid

ZSM

6. MISCELLANEOUS 6.2 Anti-yellowing Agents

PRETREATMENT

40 41

DYEING AND PRINTING

1 DISPERSING AGENTS

2 SEQUESTERING AGENTS

3 pH REGULATING AGENTS / BUFFERING AGENTS /ALKALI AND ACID DONORS

4 WETTING AGENTS / DEAERATORS / PADDING AUXILIARIES

5 LEVELLING AGENTS / DYE CARRIERS

6 CREASE PREVENTING AGENTS

7 AFTERTREATMENT AGENTS

8 CARPET COLORATION

9 MISCELLANEOUS

ZSM

ZSCHIMMER & SCHWARZ



ZST



42 43


Appearance Origin

special dispersing agent for dyeing and aftertreatment of polyester

ZETESAN DHT excellent dispersing power on disperse dyes and very good levelling action


non-ionic

yellow liquid ZSM

special dispersing agent for dyeing blends WO/PAC in a single bath

ZETESAN KA excellent dispersing power, improves dyestuff rubbing fastness, reduces unfixed dyestuff on the fibres

mixture of polyglycolether

cationic

yellow liquid ZST

special dispersing agent for oligomers

ZETESAN OLE excellent dispersing effect on oligomers, prevents oligomer depo-sits on polyester material and machine parts

modified nano particles

anionic

slightly turbid liquid ZSM

dyebath conditioner for dyeing of cellulosics, polyamide and polyester

ZS-DYESET RFT dispersing, sequestering properties, improvement of dyebath stability, increases the reproducibility of the dyeings, no foaming

combination of a nitrogen derivative with poly-carboxylic acid, alkylaryl sulfonate and inorga-nic salts

anionic

slightly turbid liquid ZSM

1. DISPERSING AGENTS

DYEING AND PRINTING

44 45


Appearance Origin

complexing agent and protective colloid for all dyeings exhaust and continuous processes

OPTAVON SV dispersing effect, alkali and salt stable, foam-free, no demetallizing effect e.g. on copper containing dyestuffs, no influence on light fastness, shade and dyestuff yield

polyacrylate

anionic

colourless up to brownish,

viscous liquid

ZSM

complexing agent and protective colloid for all dyeings exhaust and continuous processes

OPTAVON NW dispersing of calcium and magnesium separations, foamless, stable within pH range of 1 up to 14; usage in the polyamide aftertreatment is possible

organic phosphorus compound

anionic


2. SEQUESTERING AGENTS

DYEING AND PRINTING

46 47


Appearance Origin

alkali donor for high and medium reactive dyestuffs on cellulosics

exhaust process

ALKASET AOB easy shading, reducing of dyeing time, higher dyestuff yield, even and controlled liberating of alkali

buffer mixture

anionic

clear,

colourless liquid

ZSM

acid donor for the dyeing of polyamide

exhaust process

SETACID PAS slowly reduces pH up to a final pH of about 4.5 which results only at dyeing temperature

organic esters

non-ionic

clear,

colourless up toyellowish liquid

ZSM

pH adjustment of polyester dyeing baths in the acidic range

exhaust and continue process

SETACID A 40 excellent buffering effect, good ferric and calcium ion sequestering effect, low-foaming, dispersing effect

organic buffer system colourless liquid ZSM

3. pH REGULATING AGENTS / BUFFERING AGENTS / ALKALI AND ACID DONORS

DYEING AND PRINTING

48 49


Appearance Origin

deaerating agentexhaust process

CEFATEX ENN wetting, defoaming, high temperature stable, no influence on the shade

combination of ethoxylates with defoaming components

anionic

white liquid ZSM

deaerating-wetting agent exhaust process

CEFATEX ER deaerating, wetting, stable to acid, neutral and alkaline baths atall temperatures

mixture of oxiethylated and polymeric derivates

non-ionic

white liquid ZST

rapid wetting agent for dyeing of polyamide andpolyester tapes

CEFAPAD WAT excellent wetting properties sulfonocarboxylic ester

anionic

colourless,

liquid

ZSM

concentrated rapid wetting agent for dyeing of polyamide and polyester tapes

CEFAPAD WAT conc excellent wetting properties sulfonocarboxylic ester

anionic

colourless,

liquid

ZSM

antimigration agent for pad dyeings on synthetics and cellulosics

CEFAMIG MP foamless, stable to acid and alkali, no influence on shade and dyestuff yield

polyacrylamide

anionic

colourless,

viscous liquid

ZSM

4. WETTING AGENTS / DEAERATORS / PADDING AUXILIARIES

DYEING AND PRINTING

50 51


Appearance Origin

universal standard productlevelling and dispersing agent for polyester under HT and rapid dyeing conditions

SETAVIN DEG levelling, dispersing properties, lowering of absorption rate of the dyestuffs during heating-up phase, dosable


non-ionic

clear,

yellow liquid

ZSM

highly concentrated levelling agent

SETAVIN PE levelling, dispersing properties, low foaming, high dyestuff retarding effect during heating-up phase


non-ionic

yellowish-brown,

viscous liquid

ZSM

concentrated levelling agent with diffusion accelerating effect

SETAVIN SU-E levelling, migration promoting already from 100°C on, no influence on fastness properties

combination of fatty acid ethoxylate and aromatic esters

anionic

clear, brown,

viscous liquid

ZSM

combination of dispersing/ levelling agent with diffusion accelerating effect

SETAVIN MIG Dispersing, levelling, diffusion acceleration, especially for materials with difficult dye penetration

combination of fatty acid ethoxylate and aromatic carboxylic acid compounds

anionic

milky white emulsion ZSM

dye carrierdiscontinuous and continuous processes

ZS-ECOCARRIERCAB biodegradable, low odour aromatic carboxylic acid compound

anionic

clear,

brown liquid

ZSM

5. LEVELLING AGENTS / DYE CARRIERS 5.1. Polyester

DYEING AND PRINTING

52 53


Appearance Origin

standard levelling agent for the dyeing of polyamide with acid, metal complex and direct dyestuffs discontinuous and continuous processes

SETAVIN PA combination of components with fibre and dyestuff affinity, reducing of absorption rate during heating-up phase, levels out affinity differences on the fibre, reducing of barriness, good migrating, wetting and disper-sing effects

combination of alkyl-amine ethoxylates and alkyl benzene sulphonates

anionic

yellow liquid ZSM

standard levelling agent for the dyeing of polyamide with acid, metal complex and direct dyestuffs discontinuous and continuous processes

SETAVIN UDP combination of components with fibre and dyestuff affinity, reducing of absorption rate during heating-up phase, reducing of barriness, good migrating, wetting and dispersing effects


anionic

yellow liquid ZSM

concentrated levelling agent for the dyeing of polyamide with acid, metal complex and direct dyestuffs discontinuous and continuous processes

SETAVIN UDP conc combination of components with fibre and dyestuff affinity, reducing of absorption rate during heating-up phase, reducing of barriness, good migrating, wetting and dispersing effects


anionic

yellow liquid ZSM

universal levelling agent for the dyeing with acid and 1:2 metal complex dyestuffs, also for differential dyeing

SETAVIN KS good levelling effect, improves the dyestuff migration, good wetting and dispersing effects, foamless

alkylamine ethoxylate

non-ionic

clear,

yellowish-brown liquid

ZSM

universal standard product for the dyeing with acid, 1:2 and 1:1 metal complex dyestuffs

SETAVIN MSN reduces the absorption rate, mig-ration promoting, good wetting and dispersing properties, no selective influence on the dyestuff yield, low foaming, precipitation inhibitor


non-ionic

yellowish-brown,

clear liquid

ZSM

levelling agent for the dyeing of polyamide with acid dyestuffs below boiling temperature, excellent coverage of barriness

SETAVIN PNT high affinity for the fibre, thus lo-wering the absorption rate even in dyeing of polyamide fibres with high dyestuff affinity, excellently covers material irregularities, powerful mi-gration promoting properties, good wetting effect

alkylaryl sulphonate

anionic

clear,

yellow liquid

ZSM

5. LEVELLING AGENTS / DYE CARRIERS 5.2. Polyamide

DYEING AND PRINTING

54 55


Appearance Origin

special levelling agent for the continuous dyeing of polyamide tapes

SETAVIN TAPE conc

affinity for the fibre, levels out affinity differences of the fibres, excellent levelling and wetting properties, low-foaming, highly concentrated

alkane sulphonate

anionic

clear,

yellowish liquid

ZSM

levelling and dispersing agent for the dyeing of polyamide with disperse dyestuffs

SETAVIN DEG levelling, dispersing properties; lowering of absorption rate of the dyestuffs during heating-up phase, dosable


non-ionic

clear,

yellowish liquid

ZSM

5. LEVELLING AGENTS / DYE CARRIERS 5.2. Polyamide

DYEING AND PRINTING

56 57


Appearance Origin

universal standard product for the dyeing of wool with acid and premetallized dyestuffs

SETAVIN CNA reduces the uptake rate and im-proves the migration, it acts both during temperature rise and during the permanence at boiling

alkylaminopolyglycolether

cationic

yellow liquid ZST

levelling agent for the dyeing of wool with acid and premetallized dyestuffs, particularly for 1:2 monosulfonic ones

SETAVIN MSN-IT reduces the uptake rate, reduces exhaustion speed of dyestuff on the fibre, avoid drain effect


non-ionic

yellowish liquid ZST

levelling agent for the dyeing of wool, also anti-shrink wool, with reactive dyestuffs

SETAVIN RE reduces the absorption rate, im-proves exhaustion, level wool with different affinity, avoids dyestuff deposits and improve the rubbing fastness, improves reproducibility


amphoteric

brown liquid ZST

levelling and reserving agent for the dyeing of wool/polyamide

SETAVIN RWP reduce the uptake rate and improve the migration, level the affinity diffe-rence in order to obtain tone on tone colours

sulphonic acid derivate

anionic

clear,

yellow liquid

ZST

levelling and reserving agent for the dyeing of WO/PES and WO/PAC with premetallized dyestuffs no sulfonic

SETAVIN ZA reduces the uptake rate and im-proves the migration, it acts both during temperature rise and during the permanence at boiling, very good dispersing power in dyeing of WO/PES and WO/PAC

sulphate of alkylaminopolyglycolether

amphoteric

clear,

yellow liquid

ZST

special levelling agent for dyeing of wool at low temperature mainly for staple and combed sliver

SETAVIN TTLB reduces the dyeing temperature to 80-85°C, guarantees the same level of fastness, evenness and shades as in the standard process, reduces wool felting, reduces wool yellowing, makes wool easier to spin

alkylaminopolyglycolether with softner

non-ionic

milky liquid ZST

5. LEVELLING AGENTS / DYE CARRIERS 5.3. Wool

DYEING AND PRINTING

58 59


Appearance Origin

levelling agent for direct dyestuffs

SETAVIN DF lowers the absorption rate, improves the migration at final temperature, very low retarding effect, good dis-persing and emulsifying capacity


non-ionic

yellowish-brown,

clear liquid

ZSM

levelling agent for vat dyestuffs

SETAVIN KE dyestuff affinity, lowers the dye-stuff absorption rate, improves the dyestuff migration, inhibits dyestuff agglomerations, no retarding, low foaming

polyamine

non-ionic

slightly yellowish liquid of low viscosity

ZSM

levelling agent for reactive dyestuffs

SETAVIN CO dispersing, sequestering properties, protective colloid, no retarding effect, low foaming

combination of a nitrogen derivative with polycarboxylic acids, alkylaryl sulphonate and inorganic salts

anionic

yellow up to brown liquid ZSM

levelling agent for reactive dyestuffs

SETAVIN RCO ph regulating, dispersing, sequeste-ring properties, protective colloid, low foaming

combination of a nitrogen derivative with polycarboxylic acids, alkylaryl sulphonate and inorganic salts

anionic


5. LEVELLING AGENTS / DYE CARRIERS 5.4. Cellulose

DYEING AND PRINTING

60 61


Appearance Origin

levelling agent with blocking effect for acrylic fibres.

SETAVIN LSP reduces the uptake rate, promotes migration and evenness

quaternary ammonium compound

cationic

clear,

yellow liquid

ZST

levelling agent for acrylic fibres.

SETAVIN ZAC reduces the uptake rate, promotes migration and evenness, non-blo-cking action

quaternary ammonium derivate

cationic

clear,

yellow liquid

ZST

5. LEVELLING AGENTS / DYE CARRIERS 5.5. Acrylic

DYEING AND PRINTING

62 63


Appearance Origin

for use in pretreatment and dyeing; material: cellulosics

LUBATEX ECS foamless, shear stable, no retarding effect, high salt stability, resistant to acids and alkalis

polyacrylamide

non-ionic

turbid,

colourless liquid

ZSM

for use in pretreatment and dyeing; material: cellulosics

LUBATEX ECS conc foamless, concentrated, shear stable, no retarding effect, high salt stability, resistant to acids and alkalis

polyacrylamide

non-ionic

turbid,

colourless liquid

ZSM

for use in pretreatment and dyeing; material: PES, PA, WO und CEL

LUBATEX LV conc foamless, concentrated, universal crease preventing agent; electrolyte stable; stable to acid and alkali

fatty acid condensation product

non-ionic/ slightly anionic

yellowish-brown liquid ZSM

for use in fabric dyeing;material: wool, silk

LUBATEX SZ conc concentrated crease preventing agent, enables higher loading of goods in the machineries, suitable to protect fine fabrics

emulsified fatty material based product

slightly anionic

clear,

yellowish liquid

ZST

for use in fabric processes of wool

PROTELAN AF special crease preventing agent, protects from felting during wet processes, low foaming, no effect on any dyestuff

aqueous dispersion of polymer with high mole-cular weight

non-ionic

clear,

viscous liquid

ZST

DYEING AND PRINTING

6. CREASE PREVENTING AGENTS

64 65


Appearance Origin

oligomer remover,machinery cleaneruse in yarn dyeing, flock and top

ZETESAN OR dispersing and emulsifying, prevents deposits in packages and onmachinery walls

combination of quaternary compounds and polyglycol ethers

cationic

slightly turbid,

yellowish liquid

ZSM

clearing agent to improve fastness properties by using ZSM clearing systems

ZETESAL NWM excellent improvement of wet fastness properties, fastness to rubbing and to organic solvents

carboxylic acid derivatives

anionic

slightly turbid,

yellowish liquid

ZSM

clearing agent to improve fastness properties by using the ZSM REACTIVEFlash system

ZETESAL NPC excellent improvement of wet fastness properties

carboxylic acid derivatives

anionic

slightly turbid,

yellowish liquid

ZSM

light fastness improving agent for polyester for automotive

PROTELAN UV-PE improves the FAKRA light fastness, no effect on shade

benzotriazole derivate

anionic

yellowish aqueous dispersion

ZST

light fastness improving agent for polyester for automotive, with thermosol dyeingprocess

PROTELAN UV-TH improves the FAKRA light fastness, no effect on shade

benzophenone derivate

anionic

white aqueous dispersion ZST

7. AFTERTREATMENT AGENTS 7.1. Polyester

DYEING AND PRINTING

66 67


Appearance Origin

improvement of wet fastness of dyeings and printings on polyamide with acid dyestuffs; reserving agent for PA/wool and PA/cellulosic blends,processs: jet or continuous dyeing

ZETESAL NR excellent wet fastness properties, universal use, jet stable, no influence on light fastness and shade, for high-est quality requirements

polycondensation product of aromatic sulphonic acids

anionic

clear,

reddish-brown liquid

ZSM


ZETESAL NR gold excellent wet fastness properties, universal use, jet stable, no influence on light fastness and shade, substantially lower yellowing of the treated goods, for highest quality requirements


anionic

orange,

clear liquid

ZSM


ZETESAL NR gold liq excellent wet fastness properties, dosable, universal use, jet stable, no influence on light fastness and sha-de, substantially lower yellowing of the treated goods, for highest quality requirements


anionic

orange,

slightly opalescent liquid

ZSM


ZETESAL FRESH excellent wet fastness properties, universal use, jet stable, no influence on light fastness and shade, subs-tantially lower yellowing of the treated goods, for highest quality requirements, fresh odour


anionic

orange,

clear liquid

ZSM

7. AFTERTREATMENT AGENTS 7.2. Polyamide

DYEING AND PRINTING

68 69


Appearance Origin


ZETESAL FRESH liq excellent wet fastness properties, dosable, jet stable, no influence on light fastness and shade, substantially lower yellowing of the treated goods, for highest quality requirements, fresh odour


anionic

orange,

slightly opalescent liquid

ZSM


ZETESAL NT non-yellowing, universal use, no influence on light fastness, shade and handle, for high quality requirements


anionic

clear,

brown liquid

ZSM


DYEING AND PRINTING

70 71


Appearance Origin

improvement of chlorine fastness of dyeings on PA with acid dyestuffs processs: jet or continuous dyeing

ZETESAL PCL highly effective chlorine fastness improver for dyeings and printings on polyamide swimwear and carpets

preparation of carboxylic acid derivatives

anionic

brownish liquid ZSM

improvement of chlorine fastness and wet fastness of dyeings and printings on PA with acid dyestuffs processs: jet or continuous dyeing

ZETESAL SCL non-yellowing, universal use, no in-fluence on light fastness, shade and handle, for high quality requirements

condensed aryl sulphonates

anionic

clear,

brown liquid

ZSM

aftertreatment agent for improving the wet fastness properties, in particular the fastness to water and perspiration, of dyed polyamide and wool as well as their mixtures with elastane

ZETESAL TCS universal use, jet stable, for highest standards of wet fastness properties; applied in the double fixing process

(anionic/cationic)

polyamine

cationic

yellow liquid ZSM


ZETESAL CPW universal use, jet stable, for highest standards of wet fastness properties; applied in the double fixing process

(anionic/cationic)

polyamine

cationic

yellow liquid ZSM


ZETESAL F conc universal use, jet stable, for highest standards of wet fastness properties; applied in the double fixing process

(anionic/cationic)

polyamine

cationic

yellow liquid ZSM

light fastness improving agent for polyamide

PROTELAN UV-PA improves the FAKRA light fastness, no influence on wet fastness and handle

compound of copper mixed with protectors

anionic

light green

aqueous suspension

ZST


DYEING AND PRINTING

72 73


Appearance Origin

improvement of wet fastness of reactive dyeings and printings; padding or exhaust process

ZETESAL 2000 formaldehyde-free, concentrated product, good results in fastness to washing 95°C, no influence on light fastness and handle


cationic

clear,

yellowish liquid

ZSM

improvement of wet fastness of reactive dyeings and printings; padding or exhaust process

ZETESAL FIX formaldehyde-free, concentrated product, very good improvement of the wash fastness, no influence on light fastness and handle


cationic

clear,

yellowish liquid

ZSM

improvement of wet fast-ness of reactive dyeings and printings; padding or exhaust process

ZETESAL WER formaldehyde-free, no influence on light fastness and handle


cationic

clear,

yellowish liquid

ZSM

improvement of chlorine fastness and wet fastness of reactive dyeings and printings;padding or exhaust process

ZETESAL CCL formaldehyde-free, concentrated product, protects reactive dyeings excellent from influence of active chlorine in swimming pools and household detergents, imparts also good fastness to washing

polyammonium compound

cationic

yellow up to orange liquid ZSM

improvement of wet fastness of direct and reactive dyeings and printings; padding or exhaust process

ZETESAL CPW formaldehyde-free, no influence on light fastness and handle

polyamine

cationic

yellow liquid ZSM

improvement of wet fastness of direct and reactive dyeingsand printings; padding or exhaust process

ZETESAL TCS formaldehyde-free, no influence on light fastness and handle, especially effective on dyeing with C.I. Reactive 19 and 21

polyamine

cationic

yellow liquid ZSM

7. AFTERTREATMENT AGENTS 7.3. Cellulose

DYEING AND PRINTING

74 75


Appearance Origin

aftersoaping agent for fastness improvement of reactive dyeings and printings

ZETESAL NS strongly dispersing, promotes the removal of non-fixed dyestuff, prevents redeposition, foamless, also usable in dyebath

polyacrylate

anionic

yellowish,

viscous liquid

ZSM

aftersoaping agent forfastness improvement ofreactive dyeings and printings

ZETESAL SR extra dispersing, sequestering, promotes the removal of non-fixed dyestuff, prevents redeposition, foamless

combination of a nitrogen derivative with poly-carboxylic acid, alkylaryl sulfonate andinorganic salts

anionic


concentrated aftersoaping agent for fastness improvement of reactive dyeings and printings

ZETESAL SR conc dispersing, sequestering, promotes the removal of non-fixed dyestuff, prevents redeposition, foamless

combination of a nitrogen derivative with polycarboxylic acid, alkylaryl sulfonate and inorganic salts

anionic


7. AFTERTREATMENT AGENTS 7.3. Cellulose

DYEING AND PRINTING

76 77


Appearance Origin

soaping agent for wool and silk fabrics, printed with acids and premetallized dyestuffs

ZETESAL SLF excellent dispersion power, outstanding reserving effect, low foam formation, improves thefabric touch

quaternised ethoxylated alkylamines

cationic

opalescent,

slightly yellow liquid

ZST

fixing agent for fastnessimprovement of acids dyeings

ZETESAL FPO Improves wet fasteness, water and perspiration specially, formaldehyde free

polyamine compound

cationic

clear,

yellowish liquid

ZST

7. AFTERTREATMENT AGENTS 7.4. Silk

DYEING AND PRINTING


Appearance Origin

aftersoaping agent for fastness improvement

DEPICOL KD dispersing, sequestering agent, promotes the removal of non-fixed dyestuff, prevents redeposition

mixture of surfactants with additives and solvents

non-ionic

clear,

yellow liquid

ZST

7.5. Wool

78 79


Appearance Origin

reserving agent for displacement printing on polyamide carpets, also for acid ground dyes and acid printing dyes

ZETESIST CD very good reserving effects when used in alkaline printing pastes


cationic

clear,

brown liquid

ZSM

highly efficient reserving agent for the color resist process

ZETESAL NT very good reserving effects when used in printing pastes, no yellowing of white resists


anionic

clear,

brown liquid

ZSM

levelling compound for the space dyeing method applied to polyamide and wool

SETAVIN MSN reduces the absorption rate, migration promoting, good wetting and dispersing properties, no selective influence on dyestuff yield, low foaming


non-ionic

yellowish-brown,

clear liquid

ZSM

levelling and dispersing agent for the dyeing with acid, 1:2 metal complex and strongly acid dyestuffs as well as reac-tive dyestuffs

SETAVIN KS lowers the absorption rate in theheating-up phase, improves themigration, no influence on dyestuff yield


non-ionic

yellowish-brown,

clear liquid of medium viscosity

ZSM

DYEING AND PRINTING

8. CARPET COLORATION

80 81


Appearance Origin

excellent levelling agent for the dyeing of polyamide carpets with acid dyestuffs below boiling temperature

SETAVIN PNT high affinity for the fibre, thus lowering the absorption rate even in dyeing of polyamide fibres with high dyestuff affinity, excellently covers material irregularities, powerfulmigration promoting properties, good wetting effect

alkylaryl sulphonate

anionic

yellow,

clear liquid

ZSM

levelling agent for dyeing of polyamide carpets

SETAVIN PA combination of components with fibre and dyestuff affinity, reducing of absorption rate during heating-up phase, levels out affinity differences on the fibre, reducing of barriness, good migrating, wetting anddispersing effects

combination of alkylamine ethoxylates and alkyl benzene sulphonates

anionic

yellow liquid ZSM

anti-frosting agent for conti-nuous dyeing and printing

CEFAFROST AFW preventing of frosting effects by generating a fine-pored foam in acid as well as alkaline pH range, excellent wetting effects, thus no extra use of a wetting agent necessary

combination of fatty acid condensationproduct and fatty alcohol ethoxylate

anionic


DYEING AND PRINTING


82 83


Appearance Origin

cleaning auxiliary for dyeing and printing machines

ZS-CLEANER SPEZIAL dyestuff detaching, dispersing effect, promotes the removal of dyestuff residues and deposits and wash-out of printing residues, does notcorrode the roller coats

combination of quaternary ammonium compounds, surfactants and solvents

cationic

yellowish-brown up to brown liquid,

medium viscosity, pourable

ZSM

ecological reducing agent for reduction clearing of polyester

ZS-CLEANREDOX FOS odourless, free from sulphite, low sewage water pollution, not self-igniting

glucose mixture yellowish to brownish liquid ZSM

oligomer remover and machinery cleaner

usage in yarn dyeing, flock and top

ZETESAN OR dispersing and emulsifying, prevents deposits of residues in packages and on machinery walls


cationic

slightly turbid,

yellowish liquid

ZSM

oligomer remover and machinery cleaner

ZETESAN OLE dispersing, prevents deposits of oligomers in packages and on machinery walls


cationic

slightly turbid,

yellowish liquid

ZSM

unlocking, discharging agent for PAC

RETENTOL BGA restores the dyeability of saturated PAC fibres

combination of organic derivates of sulphur

anionic

yellow liquid ZST

protective agent to avoid deterioration during dyeing of wool mainly for staple and combed sliver

PROTELAN ASA preserves tensile strength andelongation properties of wool fibres, improves spinning behaviour, preserves a soft touch

solution of a mixture of organic activators

anionic

clear,

yellow liquid

ZST

DYEING AND PRINTING


84 85

FINISHING/ COATING

1 SOFTENERS

2 WATER- AND OIL-REPELLENT AGENTS

3 FLAME RETARDANTS

4 STIFFENING AGENTS/ DISPERSIONS

5 PRODUCTS FOR BACK COATING OF TUFTED CARPETS

6 DEFOAMERS

7 CROSSLINKERS

8 SPECIAL FINISHING PRODUCTS

ZSM

ZSCHIMMER & SCHWARZ



ZST



86 87


Appearance Origin

all kinds of fibres (also PAC)exhaust process

ADULCINOL BUN universal use, jet stable and free from yellowing up to 160°C

fatty acid condensation product,

cationic

beige emulsion ZSM

all kinds of fibreswhite goods, additive for high-grade finishing,pad application

CEFASOFT NI free from yellowing, jet stable, applicable in combination with optical brighteners


non-ionic

white emulsion ZSM

all kinds of fibresexhaust process

ADULCINOL SFR universal use, softener with good antistatic properties

quaternary fatty acid condensation product

cationic

white emulsion ZSM

all kinds of fibresadditive for high-grade finishing pad application

CEFASOFT MIS permanent to washing, excellent soft touch, imparts elasticity and full handle

amino group modified silicone microemulsion

non-ionic/ cationic

transparent emulsion ZSM


CEFASOFT SMA permanent to washing, excellent soft touch, imparts elasticity and smoothness

amino group modified silicone macroemulsion

non-ionic/ cationic

milky emulsion ZSM

natural fibres CEFASOFT SHD hydrophilic softener for terrycloth, sportswear etc.; also yarn application

modified siloxanes

non-ionic



CEFASOFT MSR very permanent to washing, imparts elasticity and stretch recovery

amino group modified reactive silicone micro-emulsion,

non-ionic/ cationic


all kinds of fibres additive for high grade-finishingimproves sewability

CEFASOFT PED softener and additive for high-grade finishing, it improves sewability and tear strength in high-grade finishing

polyethylene dispersion

non-ionic

yellowish dispersion ZSM

1. SOFTENERS 1.2 Product description

FINISHING/ COATING

88 89


Appearance Origin

all kinds of fibresknitwear, raising, white goods, pad application

CEFASOFT GW no yellowing, imparts very high lubricity (improves sewability)

fatty acid condensation product and polyethylene

non-ionic

yellowish dispersion ZSM

all kinds of fibresknitwear, raisingexhaust process

ADULCINOL GV stable in jets, reduces fibre-metal friction, imparts high smothness

fatty acid condensation product, polyethylene and paraffin

cationic

beige emulsion ZSM

for wool, silk, acrylic fibres and their blends

ADULCINOLM EB22 good resistance to yellowing, good antistatic power, AEEA free

mixture of fatty amids

weakly cationic

white emulsion ZST

for acrylic, wool and their blends

ADULCINOL ALD no foaming, soft and woolly touch fatty acid condensation product

cationic

yellowish emulsion ZST

for napping operations of wool, hair fibres and their blends

ADULCINOL BML no foaming, soft and woolly touch, good antistatic power, increases lubricity


cationic

white emulsion ZST


ADULCINOL ET no foaming, soft and woolly touch, increases lubricity

fatty acid condensation product and silicone

cationic

fluid emulsion ZST


FINISHING/ COATING

90 91


Appearance Origin


ADULCINOL AMS no foaming, very soft touch, increases lubricity

fatty acid condensation product and silicone

cationic

fluid emulsion ZST


CEFASOFT NEX no foaming, very soft and woolly touch, good washing resistance

amino-functional polysiloxane

weakly cationic

clear emulsion ZST

for wool, silk, acrylic fibres and their blends, particularly for knitting operation

CEFASOFT SMA conc silicone macroemulsion for permanent and elastic finishing, soft and woolly touch, increases lubricity and sewability

amino-functional polysiloxane

non-ionic

white emulsion ZST

special softener for silk fibres CEFASOFT K gives special scroopy hand fatty alcohol derivate

non-ionic

white paste ZST

all natural fibres, particularly for cotton

CEFASOFT NIL good resistance to yellowing, good antistatic power, no foaming


amphoteric

white emulsion ZST

Concentrates

ADULCINOL FT concentrated product for manufactu-ring „ready-for-use“ softeners( -> ADULCINOL BUN)


cationic

yellowish flakes ZSM

CEFASOFT MC concentrated product for manufacturing „ready-for-use“ softeners( -> CEFASOFT MIS)

amino group modified silicone microemulsion

non-ionic/ cationic



FINISHING/ COATING

92 93


Appearance Origin

durable water- and oil-repellent finishing, especially for synthetic fibres and their blends

ANTHYDRIN TA free from solvents, no influence on the touch of the goods

fluorocarbon resin

weakly cationic

white emulsion ZSM

durable water- and oil-repellent finishing, especially for natural fibres and their blends

ANTHYDRIN SCE free from solvents, no influence on the touch of the goods, based on C6-chemistry

fluorocarbon resin

weakly cationic

white emulsion ZSM

durable water- and oil-repellent finishing, universal use on all kinds of fibres, optimum water- and oil-repellence

ANTHYDRIN NHP free from solvents, no influence on the touch of the goods

fluorocarbon resin

weakly cationic

white emulsion ZSM

durable water- and oil-repellent finishing, universal use on all kinds of fibres, LAD effect (Laundry/Air dry)

ANTHYDRIN LAD free from solvents, no influence on the touch of the goods

fluorocarbon resin

weakly cationic

white emulsion ZSM

durable water- and oil-repellent finishing, universal use on all kinds of fibres

ANTHYDRIN SC free from solvents, no influence on the touch of the goods; based on C6-chemistry

fluorocarbon resin

weakly cationic

white emulsion ZSM

durable water- and oil-repellent finishing, especially for wool andsilk fibres and their blends

ANTHYDRIN RBT free from solvents, no influence on the touch of the goods, low temperature curing

fluorocarbon resin

cationic

white emulsion ZST

non permanent waterrepellent finishing, especially for natural fibres and their blends

ANTHYDRIN PSZ conc free from solvents, pleasant soft touch

hydrocarbons compound and zirconium salts

weakly cationic

white emulsion ZST

durable water- and oil-repellent finish, for all kind of fibres

ANTHYDRIN NK6 based on C6- chemistry, low curing temperature, free from solvents

weakly cationic fluorocarbon resin white emulsion ZSM

FINISHING/ COATING

2. WATER- AND OIL-REPELLENT AGENTS

94 95


Appearance Origin

flame retardant finish for syn-thetic fabrics

FLAMMEX LF not permanent, fogging-free inorganic phosphorus compound transparent liquor ZSM

flame retardant finish for fabrics with a high content of cellulose

FLAMMEX BSD semi-permanent inorganic phosphorus and nitrogen compound transparent liquor ZSM

flame retardant finish for synthetics and their blends

FLAMMEX SP not permanent Inorganic and organic phosphorus compound transparent liquor ZSM

flame retardant finish for polyester

FLAMMEX DS permanent organic phosphorus compound transparent liquor ZSM

flame retardant finish for the combination with dispersions

FLAMMEX APP low water solubility inorganic phosphorus and nitrogen compound white powder ZSM

FINISHING/ COATING

3. FLAME RETARDANTS

96 97


Appearance Origin

filling agent, selvedge adhesive

POLAPPRET HW very soft handle, permanent to washing, self-crosslinking

polyvinyl acetate copolymerweakly anionic

white,

liquid dispersion

ZSM

filling and stiffening agent, selvedge adhesive

POLAPPRET VAC-H filling finish imparting a relatively hard handle

polyvinyl acetatecopolymer

weakly anionic

white dispersion ZSM

filling and stiffening agent POLAPPRET HNH very stiff handle, not permanent to washing

polyvinyl acetate

non-ionic

white,

viscous dispersion

ZSM

filling agent, coating POLAPPRET AC-S soft handle, self-crosslinking, durable to washing

polyacrylate copolymer

non-ionic

white dispersion of low viscosity

ZSM

filling and stiffening agent, coating

POLAPPRET NA stiff, but elastic handle, self- crosslinking, permanent to washing

polyacrylate copolymer

non-ionic

white,

viscous dispersion

ZSM

filling and stiffening agent, antipilling, coating

POLAPPRET PU-DM very soft dispersion, hydrophilic, antipilling finish, nearly no influence on handle

polyurethane

non-ionic

white liquid ZSM

filling and stiffening agent, coating

POLAPPRET PU-H imparting a hard, elastic handle polyurethane

non-ionic

white liquid ZSM

filling and stiffening agent, binder for Triple Fresh, coating

POLAPPRET PU-S soft, elastic handle polyurethane

non-ionic

white liquid ZSM

FINISHING/ COATING

4. STIFFENING AGENTS/ DISPERSIONS

98 99


Appearance Origin

antistatic agent for latex back coating of tufted carpets and needle felt

ELACTIV 1307 meets requirements according to EN 1307 (after spray extraction cleaning), no effect on delamination

carboxylic acid and polymers

anionic

weakly yellowish liquid ZSM


ELACTIV KH no effect on delamination and bon-ding of tufts

carboxylic acids and polymers

anionic



ELACTIV KE no effect on delamination and bon-ding of tufts

carboxylic acids

anionic


wetting agent for the latex back coating of tufted carpets and needle felt

FLEROGUM FC decreases surface tension of latex compounds for better wetting of the pile yarn

sulphosuccinate

anionic

clear,

viscous liquid

ZSM

stabiliser for latex foam back coating of tufted carpets and needle felt(non-gel process)

FLEROGUM 2317 specifically designed for the non-gel process (vulcanisation of latex without vulcanisation agent),also applicable as a foaming agent

sulphosuccinamate

anionic

straw-coloured to white dispersion

ZSM

FINISHING/ COATING

5. PRODUCTS FOR BACK COATING OF TUFTED CARPETS

100 101


Appearance Origin

foam killing, reducing and preventing

CONTRIPON MD concentrated product for all purposes, free from silicone

hydrocarbons

non-ionic

yellowish,

turbid liquid

ZSM


CONTRIPON W-P concentrate, stable in storing, universal application

polysiloxane

non-ionic

white,

viscous emulsion

ZSM


CONTRIPON S defoamer with outstanding shear, temperature and pH-stability

modified polysiloxane emulsion

non-ionic

white emulsion ZSM


CONTRIPON BD fully biodegradable defoamer based on renewable raw materials

plant oils

non-ionic

yellowish,

turbid liquid

ZSM


CONTRIPON RT concentrated, silicone- and mineral-oil-free defoamer

fatty alcohol

non-ionic

white-yellowish emulsion ZSM


CONTRIPON ANS biodegradable, silicone- and mineral-oil-free defoamer, VOC free


non-ionic

yellowish,

turbid liquid

ZST

FINISHING/ COATING

6. DEFOAMERS

102 103


Appearance Origin

crosslinker for polyacrylate polyurethane dispersions and fluorocarbons

POLAPPRET VIB deblocks at 150°C formaldehyde free, blocked isocyanate white liquid ZSM

crosslinker for dispersions and pigment printing

POLAPPRET HST formaldehyde free, stable toyellowing

blocked isocyanate white liquid ZSM

7. CROSSLINKERS

FINISHING/ COATING

104 105


Appearance Origin

hydrophilic treatment for PES and mixtures with cotton or wool

CEFATEX PE improves wearing comfort by improving touch, hydrophilic properties and elasticity, better moisture transmission, antistatic properties, lower soil redeposition, easier stain removal

hydrophilic copolymer non-ionic

white liquid ZSM

synthetic fibrespad application

VOLTURIN TP 3000 antistatic agent especiallyfor synthetics

alkyl phosphate

anionic


CO and CO blends SANFOROL TC sanforizing agent with very good softening and smoothing properties for cellulose fibres and their blends with synthetics

ester sulphonate and polyethylene

anionic

opalescent,

yellowish liquid

ZSM

durable antimicrobial finishing of cellulosic textiles

BIOBAC ZS inhibits the growth of odour-causing or pathogenic micro-organisms

polyhexamethylene-biguanidehydrochloride cationic

clear,

colourless liquid

ZSM

thickener for coatings CARBOLAN DL thickens in alkaline medium ( pH 8 – 10 )

polyacrylate

anionic

white liquid ZSM

wool fibres pad application DUROZELL FL chemical fixing of wool, anti-crease power, reduces pilling

monoethanolamine sulphite and additives

anionic

clear,

colourless liquid

ZST

anti-slipping agent for wool, silk and viscose

SILSOL S230 high cohesion power, improves ad-hesiveness between threads, special touch for silk and viscose


cationic

opalescent liquid ZST

permanent and elasticfinishing of fabric

ZETELAST 812 ensures permanent and elastic properties, pleasant touch

polysiloxane compound

non-ionic

white emulsion ZST

8. SPECIAL FINISHING PRODUCTS

FINISHING/ COATING

05-1

3

ZSCHIMMER & SCHWARZMOHSDORF GmbH & Co KG

Chemnitztalstraße 1 ∙ 09217 BURGSTÄDT / GERMANY Tel.: +49 3724 67-0 ∙ Fax: +49 3724 [email protected] ∙ www.zsm.de

ZSCHIMMER & SCHWARZZ E T A E S S E T I S . r . l .

Via Angelo Ariotto, 1/B ∙ 13038 TRICERRO (VERCELLI) / ITALY Tel.: +39 0161 80 86 01 ∙ Fax: +39 0161 80 73 [email protected] ∙ www.zetaesseti.it

www.zschimmer-schwarz.com

ZertifiziertesManagementsystem

gemäß

ISO 9001:2008

Publication

Documents

Transcript of Publication