Public Auctiondgauction.ca/wp-content/uploads/2016/08/McCoy-Global...HAAS Model Servo Bar 300...
Transcript of Public Auctiondgauction.ca/wp-content/uploads/2016/08/McCoy-Global...HAAS Model Servo Bar 300...
Turn
in
g Your Assets into Dollars
Public AuctionSURPLUS
EQUIPMENT
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
Asset Sales (Canada) Inc.4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z 1L5Tel 902.852.5331 Fax 704.821.4325
MACHINING ASSETS NO LONGER NEEDED IN CONTINUING OPERATIONS OF
MCCOY GLOBAL USA, INC.LATE MODEL MAZAK, HAAS, FURNACE, CNC & MANUAL MACHINES
4225 HWY 90 EAST - BROUSSARD, LA 70518TUESDAY, SEPTEMBER 27TH @ 10:00 A.M. CDT
Inspection: Monday, September 26th, From 8:00 A.M. - 4:00 P.M. CDT
(2) HAAS VF6/50 4-AXIS VERTICAL MACHINING CENTERS
HAAS EC1600 YZT HORIZONTAL MACHINING CENTER
MAZAK STN 550M/2000U LARGE CAPACITY TURNING CENTER WITH MILLING
HAAS ST30Y CNC TURNING CENTER WITH Y-AXIS & MILLING
2012
2011
2012 2AVAIL. 2012
105214_McCoy.indd 1 8/19/16 3:27 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, SEPTEMBER 26TH FROM 8:00 A.M. - 4:00 P.M. CDT
2
HORIZONTAL MACHINING CENTERHAAS Model EC1600 YZT Horizontal Machining Center with Extended Z-Axis Travel to 40”, 64” X-Axis, 50” Y-Axis, 32” x 64” Table with 32” Diameter 4th Axis Rotary Platter, #50 Taper Spindle Speeds to 7,500 RPM, Thru-Spindle Coolant, Intuitive Probing, 30 Automatic Toolchanger, Dual Chip Augers, HAAS CNC Control with Remote Pulse Generator, sn:2053815, mfg.7/2012
VERTICAL MACHINING CENTERS, 3, 4 & 5 AXIS(2) HAAS Model VF9/50 3-Axis Vertical Machining Centers with 84” x 36” Table, 84” X-Axis Travel, 40” Y-Axis, 30” Z-Axis, #50 Taper Spindle Speeds to 7,500 RPM, Thru-Spindle Coolant, 30 Side Head ATC, Intuitive Probing (2011), High Intensity Lighting, HAAS CNC Controls, sn:1051494, mfg.9/2006 ● sn:1084593, mfg.04/2011
HAAS Model VF6/50 TR 5-Axis Vertical Machining Center with 12” 2-Axis Rotary Trunnion, 64” X-Axis Travel, 32” Y-Axis, 30” Z-Axis, +/- 120° A-Axis (Tilt), 360° B-Axis (ROT), #50 Taper Spindle Speeds to 7,500 RPM, Thru-Spindle Coolant, 30 Side Head ATC, Intuitive Probing & Programming, High Intensity Lighting, HAAS CNC Control with Remote Pulse Generator, sn:1094504, mfg.5/2012
HAAS EC1600 YZT HORIZONTAL MACHINING CENTER WITH EXTENDED Z-AXIS
HAAS VF6/50 TR 5-AXIS VERTICAL MACHINING CENTER
Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at (888) 800-4442! We Pay Great
Finder’s Fees!
2012
2012
VERTICAL MACHINING CENTERS, 3, 4 & 5 AXIS (continued)
(2) HAAS Model VF6/50 4-Axis Vertical Machining Centers with 64” x 28” Tables, 64” X-Axis Travel, 32” Y-Axis, 30” Z-Axis, #50 Taper Spindle Speeds to 7,500 RPM, Thru-Spindle Coolant, 30 Side Head ATC, Intuitive Probing, High Intensity Lighting, HAAS CNC Controls with Remote Pulse Generators (12” 4th Axis Rotary Tables may be sold separate), sn:1094462, mfg.4/2012 ● sn:1082531, mfg.1/2011
(2) MAZAK Model VTC-250D/50 4-Axis Traveling Column Vertical Machining Centers with 82” x 26” Table, 69” X-Axis Travel, 26” Y-Axis, 26” Z-Axis, #50 Taper Spindle Speeds to 6,000 RPM, Probing, Thru-Spindle Coolant, 24 ATC, (16” Mazak 4th Axis Rotary Tables may be sold separate), sn:240611, mfg.7/2012 ● sn:240612, mfg.7/2012
MAZAK Model 510C-II 3-Axis Vertical Machining Center Wired for 4th Axis with 61” x 21” Table, 41” X-Axis Travel, 20” Y-Axis, 20” Z-Axis, #40 Taper Spindle Speeds to 12,000 RPM, Intuitive Probing, 30 Side Head ATC, Chip Conveyor, Mazatrol Nexus Matrix CNC Control with Remote Pulse Generator, sn:236625, mfg.4/2012
5AXIS
105214_McCoy.indd 2 8/19/16 3:27 PM
AUCTION SALE DATE & TIME – TUESDAY, SEPTEMBER 27TH @ 10:00 A.M. CDT
3
2012
(2) HAAS VF6/50 4-AXIS VERTICAL MACHINING CENTERS
2011
(2) MAZAK VTC-250D/50 4-AXIS TRAVELING COLUMN VERTICAL MACHINING CENTERS
2AVAIL.
2012
2AVAIL.
(2) HAAS VF9/50 3-AXIS VERTICAL MACHINING CENTERS
2011 2006
105214_McCoy.indd 3 8/19/16 3:28 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, SEPTEMBER 26TH FROM 8:00 A.M. - 4:00 P.M. CDT
4
<MAZAK SLANT TURN NEXUS 550M/2000U LARGE CAPACITY TURNING CENTER WITH MILLING
2012
<MAZAK 510C-II 3-AXIS VERTICAL MACHINING CENTER
Can’t Attend the Sale? Still Want to Bid?
Visit Our Website at www.asset-sales.com
For More Bidding Options.Check Out Our Upcoming Auction
Calendar! You Can Also Sign Up to Receive
Email Notifications by Joining Our Mailing List!
Download a lot book at www.asset-sales.com
HAVE A MACHINE YOU WANT TO SELL? CALL US FOR A
CASH OFFER.
2012
24"CHUCK
105214_McCoy.indd 4 8/19/16 3:28 PM
AUCTION SALE DATE & TIME – TUESDAY, SEPTEMBER 27TH @ 10:00 A.M. CDT
5
CNC TURNING CENTERS WITH Y-AXIS OR MILLING
MAZAK Slant Turn Nexus 550M/2000U Large Capacity Turning Center with Milling, 40.9” Maximum Swing, 36” Maximum Machining Diameter, 80.4” Maximum Cutting Length, 24” 3-Jaw Power Chuck with 11” Bore, 4,000 RPM, Rotary Tool Speed, 12 Position Turret, Belt Chip Conveyor, Mazatrol Nexus Matrix CNC Control, sn:236880, mfg.2012
HAAS Model DS30Y Dual Spindle CNC Turning Center with Y-Axis & Milling, 18” Maximum Cutting Diameter, 23” Maximum Cutting Length, 8.3” Power Chucks on MaiN & Secondary Spindles, 2” Y-Axis Travel, Dual Spindle Speeds to 4,000 RPM, 3.5” Main Spindle Bore, 2.4” Secondary Spindle Bore, 12 Station Turret, Belt Chip Con-veyor, High Intensity Lighting, sn:3092242, mfg.6/2012
HAAS Model ST30Y CNC Turning Center with Y-Axis & Milling, 18” Maximum Cutting Diameter, 23” Maximum Cutting Length, 10” 3-Jaw Power Chuck with 3” Bore, 2” Y-Axis Travel, Spindle Speeds to 3,400 RPM, 12 Station Turret, Belt Chip Conveyor, sn:3087504, mfg.2011
HAAS Model ST40 CNC Turning Center with Milling, 25” Maximum Cutting Diameter, 44” Maximum Cutting Length, 15” 3-Jaw Power Chuck with 4.25” Bore, 6,000 RPM Rotary Tool Speed, Tool Probe, Belt Chip Conveyor, High Intensity Lighting, Thru Pressure Coolant, HAAS CNC Control with Remote Pulse Generator, sn:3092340, mfg.7/2012
MAZAK Quick Turn Nexus 350M CNC Turning Center with Milling, 20” Maximum Swing, 16.5” Maximum Cutting Diameter, 34” Maximum Cutting Length, 15” 3-Jaw Power Chuck with 4” Bore, 4,000 RPM Rotary Tool Speed, 12 Position Turret, Belt Chip Conveyor, Tool Probe, Mazatrol Nexus 640T CNC Control, sn:174348, mfg.7/2005
<HAAS DS30Y DUAL SPINDLE CNC TURNING CENTER WITH Y-AXIS & MILLING
HAAS ST30Y CNC TURNING CENTER WITH Y-AXIS & MILLING
HAAS ST40 CNC TURNING CENTER WITH MILLING
2012
2012
2011
MAZAK QTN 350M CNC TURNING CENTER
(888) 800-4442
2005
105214_McCoy.indd 5 8/19/16 3:28 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, SEPTEMBER 26TH FROM 8:00 A.M. - 4:00 P.M. CDT
6
CNC TURNING CENTER WITH Y-AXIS OR MILLING (continued)
MAZAK Model M5N x 80” CNC Flat Bed Lathe with 24” Maximum Swing, 22” Maximum Machining Diameter, 81” Maximum Machining Length, Spindle Speeds to Approx. 2,200 RPM, 6” Bore, 8 Position Front / 6 Position Rear Turrets, Belt Chip Conveyor, Mazatrol 640T CNC Control, sn:172176, mfg.10/2004
MAZAK Quick Turn Nexus 350 CNC Turning Center with 12” 3-Jaw Power, Chuck, 26” Maximum Swing, 34” Distance to Tailstock, 4” Bore, 12 Position Turret, Belt Chip Conveyor, Mazatrol 640T Nexus CNC Control, sn:173036, mfg.12/2004
HAAS Model SL40 CNC Turning Center with 15” 3-Jaw Power Chuck 40” Swing, 25” Maximum Cutting Diameter, 44” Maximum Turning Length, Tailstock, Tool Presetter, 4.125” Bore, High Intensity Lighting, Belt Chip Conveyor & HAAS CNC Control with Remote Pulse Generator, sn:3087736, mfg.2011
HAAS Model SL40 CNC Turning Center Chucker with 15” 3-Jaw Power Chuck, 40” Swing, 10 Position Turret, Tool Presetter, Belt Chip Conveyor, High Intensity Lighting & HAAS CNC Control, sn:3074709, mfg.10/2006
MAZAK Quick Turn 28N CNC Turning Center with 10” 3-Jaw Power Chuck, Approximately 42” Centers to Tailstock, 8 Position Turret, Tool Presetter, Chip Conveyor & Mazatrol T-32-2 CNC Control, sn:106036
MAZAK M5N X 80" CNC FLAT BED LATHE MAZAK QTN 350 CNC TURNING CENTER
HAAS SL40 CNC TURNING CENTER
2011
MAZAK QUICK TURN 28N CNC TURNING CENTER
HAAS SL40 CNC TURNING CENTER
2006
20042004
105214_McCoy.indd 6 8/19/16 3:28 PM
AUCTION SALE DATE & TIME – TUESDAY, SEPTEMBER 27TH @ 10:00 A.M. CDT
7
CNC ACCESSORIESHAAS Model Servo Bar 300 Magazine Barfeed, sn:93215, mfg.2010
(2) HAAS 12” 4th Axis Rotary Tables
(2) TROYKE 16” 4th Axis Rotary Tables with Tailstock, Model DL-165B, sn:6159-10 ● sn:6159-11
Large Assortment of Multi-Drawer KENNEDY Tool Boxes ● #40 / #50 Taper Toolholders ● 4th Axis Rotary Tables ● Live & Static Turning Tool Holders ● 6” – 10” KURT Machine Vises ● Portable Tool Carts ● Chuck Jaws ● Etc…
BRAZING / SINTERING FURNACEABBOTT FURNACE CO. Pass-Thru Brazing / Sintering Furnace with 8” W x 6-1/4” H Part Opening & Stainless Steel Mesh Pass Thru Belt Hydrogen / Nitrogen / Argon Atmosphere Controls, 2,150° Fahrenheit, Oxygen Analyzer, 14’ Heat Zone, Model 4ZSCR-08-168-HH4-2150, sn:AB700-22064-McCoy-0412, mfg.2013
ABBOTT FURNACE CO. Pass-Thru Drying Furnace with 24” W x 6-3/4” H Part Opening & Stainless Steel Mesh Pass-Thru Belt, Digital Temperature Gauges, Model 1ZCON-24-96DF1-600, sn:AB7701-22132-McCoy-0412, mfg.2013
HAAS SERVO BAR 300 MAGAZINE BARFEED
ABBOTT FURNACE CO. PASS-THRU BRAZING / SINTERING FURNACE
2010 (2) TROYKE 16" 4TH AXIS (2) HAAS 12" 4TH AXIS
ABBOTT FURNACE CO. PASS-THRU DRYING FURNACE
2013
Download a lot book at www.asset-sales.com
2AVAIL.
2AVAIL.
LIKENEW
105214_McCoy.indd 7 8/19/16 3:28 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, SEPTEMBER 26TH FROM 8:00 A.M. - 4:00 P.M. CDT
8
(3) ROLL-IN VERTICAL BANDSAWS
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location or Can Arrange for a Third Party Logistics Firm to Manage the Removal Process for Them.
BANDSAWSDOALL Model 2618 Block & Slab Vertical Bandmill (Saw) with 42” x 44” Auto Feed Table, 26” Throat Depth, 18” Height, Variable Blade Speeds to 310 R.P.M., Variable Feeds, 1.5” Wide Blade, Coolant, Pendant Control, sn:54913113, mfg.2013
DOALL Model C4100NC Automatic Programmable Horizontal Bandsaw with 14” x 16” Capacity, 14” Rounds, Programmable Stock Feed, Speeds, (3) Vises, Discharge Table, Chip Conveyor, UniOP PLC Controls & Coolant, sn:524-11325, mfg.8/2011
(2) HEM Model H90A-1 Automatic Horizontal Bandsaws with 12.75” x 12.75” Capacity, 12” Rounds, Multi-Index Infeed, Discharge Tables, Coolant, sn:877804 ● sn:NA
(2) ROLL-IN Portable Vertical Bandsaws Model EF1459 with 12” Throat Depth, 18” x 29” Table, sn:11077EF ● sn:10007EF
ROLL-IN Vertical Bandsaw Model EF1459 with with 12” Throat, 18” x 29” Table, sn:04177EF
DRILLS, MILLING MACHINE & LATHE
CARLTON 4’ x 13” Column Radial Arm Drill Model 3A with Power Elevation & Clamping, MT Spindle Speeds to 1,200 RPM, 26” x 33 T-Slot Box Table, Coolant, sn:3A-3795
BRIDGEPORT Variable Speed Vertical Milling Machine with 9” x 42” Table, R-8 Spindle Speeds to 4,200 RPM, DRO, sn:22445
TOOLMEX 28” Swing x 160” Centers Heavy Duty Engine Lathe, Model TUR-710 with 21-1/6” Diameter 4-Jaw Chuck, 15” Diameter 3-Jaw Chuck, 48” Bore, Steady Rest, Spindle Speeds to 1,400 RPM, Inch / Metric Threading, Anilam 2-Axis Digital Readouts, sn:51235
DOALL C4100NC AUTOMATIC PROGRAMMABLE HORIZONTAL BANDSAW
DOALL 2618 BLOCK & SLAB VERTICAL BANDMILL (SAW)
(2) HEM H90A-1 AUTOMATIC HORIZONTAL BANDSAWS
TOOLMEX 28" SWING X 160" CENTERS HEAVY DUTY ENGINE LATHE
BRIDGEPORT VARIABLE SPEED VERTICAL MILLING MACHINE
2013 2011
(888) 800-4442
2AVAIL.
105214_McCoy.indd 8 8/19/16 3:28 PM
AUCTION SALE DATE & TIME – TUESDAY, SEPTEMBER 27TH @ 10:00 A.M. CDT
9
GEAR SHAPERS(2) FELLOWS No.36 36” Gear Shapers with 40” Maximum Workpiece Diameter, 36” Maximum Pitch Diameter Internal, 6” Maximum Face Width, 6” Stroke, Stroke Speed Ranges 10-300 SPM, sn:27536 ● sn:28305
FELLOWS No.61A 18” Gear Shaper with 18” Maximum Workpiece Diameter, 5” Maximum Face Width, Stroke Speed Ranges 50-300 SPM
TANK TURNING ROLLS(2) PROFAX Model TR1500 Tank Turning Rolls with 750lb Capacity, Idler, sn:TR-1918
WELDING POSITIONER & WELDING / WELD
AREA PRESTON Model PA-SMT Welding Positioner with 500lb Capacity, 22” Tilt Table, sn:PA5-400
(4) MILLER Model CP-302 Portable Welders with MILLER 22A Port Wire Feeder, sn:MC060388V ● sn:LC308099 ● sn:LG450158C ● sn:LG280197C
MILLER Deltafab Welder with MILLER 24A Port Wire Feeder, sn:LG250531C
MILLER Model CP-302 Welder with MILLER 22A Port Wire Feeder, sn:LE497836
LINCOLN Idealarc R3R-400 Portable Welder, sn:AC835304
(3) Acetylene Torch Carts
Fume / Smoke Extractors ● Weld Tables ● Cabinets ● Etc…
(2) FELLOWS NO.36 36" GEAR SHAPERS
(2) PROFAX TANK TURNING ROLLS
Want to Join Our Mailing List? Want to be Included in Email Blast announcing Upcoming Future Auctions? Want to Update Your Address? Curious to Preview Machines and
Tooling Featured in an Upcoming Auction? Want to Request a Brochure? Email Us at [email protected] or Fax a Request to (704) 821-4325!
FELLOWS NO.61A 18" GEAR SHAPER
MILLER WELDERS
ASSORTED WELDERS, WELDING POSITIONER, TORCH CARTS, ETC...
ATTENDING THE AUCTION
IN PERSON?What you need to bring.....
• Your Driver’s License• Business Card
• Tax Exempt Form if Non Taxable
• Bank Letter of Guarantee if Paying via Company
Check
2AVAIL.
105214_McCoy.indd 9 8/19/16 3:28 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, SEPTEMBER 26TH FROM 8:00 A.M. - 4:00 P.M. CDT
10
GOFF GEORGE FISCHER SHOT BLAST MACHINE
FARO ARM SILVER PORTABLE CMM WITH LAPTOP COMPUTER
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport
or Rig Items.Buyers May Pick Up Their
Items at the Auction Location or Can Arrange for a Third
Party Logistics Firm to Manage the Removal
Process for Them.
PAINT BOOTHBINKS 8’ W x 15’ D x 10’ H Paint Spray Booth with Backdraft Ventilation, Double Front Doors, Side Door Entry, Fire Suppression
CLEMCO Blast Cabinet with 48” Diameter Rotary Table on Track Double Slide Door Opening, Work Gloves, Window & Reclaim, sn:52395, mfg.2004
SHOT BLASTGOFF GEORGE FISCHER Shot Blast Machine, Model 36PTB with 36” Diameter Automatic Rotary Table, Controls, Timer & Reclaim, sn:93371-50-3823, mfg.1993
INSPECTIONFARO ARM Silver Portable CMM with Laptop Computer, CAM2 Version1.0.09 Software, sn:P08050807221, mfg.2008
BRIDGE CRANES(3) 3 Ton x 60’ GAFFEY & ANCHOR Underslung Bridge Cranes with Shawbox 3 Ton Hoist, Pendant Controls, sn:3388211 ● sn:4383924-1 ● sn:102187
MISCELLANEOUSVIDMAR Cabinets ● 8” KURT Vises ● Inserts ● Lathe Tooling ● Pallet Jacks ● KENNEDY Workbenches ● Hand Tools ● Dump Hoppers ● Perishable Tooling ● Steel Welding Tables ● Numerous Lifting Magnets ● (2) KEEN Model K-200 12” x 12” Ovens, sn:906605 ● 906611
BINKS 8' W X 15' D X 10' H PAINT SPRAY BOOTH CLEMCO BLAST CABINET
(3) 3 TON X 60' GAFFEY & ANCHOR UNDERSLUNG BRIDGE CRANES
3AVAIL.
2008
105214_McCoy.indd 10 8/19/16 3:28 PM
AUCTION SALE DATE & TIME – TUESDAY, SEPTEMBER 27TH @ 10:00 A.M. CDT
11
HYDRAULIC MOTOR TEST STAND CARLTON 4' X 13" COLUMN RADIAL ARM DRILL
Want to Sell Your Shop or
Know Someone Who
Does? Call Us Toll Free at
(888) 800-4442! We Pay
Great Finder’s Fees!
105214_McCoy.indd 11 8/19/16 3:28 PM
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – Louisiana License #AB-344 & 1776
ABBOTT FURNACE CO. PASS-THRU BRAZING SINTERING FURNACE
DIRECTIONS From Lafayette Regional Airport:
Exit Airport onto LA 728-8. Use the left 2 lanes to turn left onto US-90 E / Hwy 90 E/SW Evangeline Thruway for 5.5 miles. Make a U-Turn at N. Girouard Rd. Plant will be on the right. Follow the Auction Signs.
HOTELSHOLIDAY INN EXPRESS & SUITES LAFAYETTE 210 Kaliste Saloom Rd. - Lafayette, LA 70508 (337) 456-6900
HAMPTON INN & SUITES LAFAYETTE 1910 S. College Rd. - Lafayette, LA 70508 (337) 266-5858
UPCOMING AUCTIONSTHURSDAY, OCTOBER 6th - Plano Machine & Instrument, Inc.Late Model CNC & Manual Machine ShopOnsite / OnlineGainesville, TX
PUBLIC AUCTIONMACHINING ASSETS NO LONGER NEEDED
MCCOY GLOBAL USA, INC.Late Model Mazak, Haas, Furnace, CNC &
Manual MachinesBroussard, LA
TUESDAY, SEPTEMBER 27TH @ 10:00 A.M. CDT
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.
Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
2013
105214_McCoy.indd 12 8/19/16 3:29 PM