BID, BUY & GO!™L I V E W E B C A S T

Webcast powered by:

“Let Our Experience Be Your #1 Asset” TM

DATE TIME LOCATION

PUBLIC AUCTIONAUTODIE CORPORATION

Tuesday, April 12, 2011

CNC MACHINING, STAMPING AND LARGE OffERING Of CONvENTIONAL MACHINE TOOLS

10:30 A.M. EDT 135 Werlich DriveCambridge, Ontario N1T 1N7

TAKUMI V11A CNC vertical machining center

MEUSER M110BFS table type horizontal boring mill HAvLIK Y41 100 hydraulic press

MAS VA 50 5’ way type radial arm drill

2 AvAILABLE 1996

68” x 76” ROTARY TABLE100 TON

PROxY BIDDING If you are unable to attend this auction, we would be pleased to act as your proxy. Please contact our

office at (416) 962-9600 or visit our website for a proxy bid form, terms and additional information. www.corpassets.com

MITUTOYO BH710 CMM

BLANCHARD #18 rotary surface grinder

TOS 16” x 59” hydraulic surface grinder

TAKUMI V11A CNC vertical machining center

LARGE QUANTITY Of MACHINE SHOP EQUIPMENT AvAILABLE

HAvLIK FA5AV vertical milling machine

2

This brochure is only a partial listing. PLEASE VISIT OUR WEBSITE FOR MORE DETAILED LISTINGS AND PHOTOS www.corpassets.com

(2) TAKUMI (1996) V11A CNC VMC with MITSUBISHI MELDAS 500 CNC control, 53” X 32” table, travels: X – 43”, Y – 22”, Z – 22”, 31” maximum distance spindle nose to table top, speeds to 8000 RPM, BT 40 taper, 24 ATC, 15 HP, coolant, chip conveyor s/n G0252, G0360

CNC vERTICAL MACHINING CENTERS

MEUSER M110BFS table type horizontal boring mill with 4.3” spindle, 76” X 68” power rotary table, 72” vertical travel, 108” cross travel, #50 taper, speeds to 710 RPM, ACURITE 4 axis DRO, 30 HP main motor, coolant s/n 42837

HORIZONTAL BORING MILL

KENDALL & GENT CVM 60 bed type vertical milling machine with 108” X 33” table, speeds to 840 RPM s/n n/aHAvLIK FA5AV vertical milling machine with 79” X 18” table, speeds to 1400 RPM s/n 44995MECHANICY FYA 41M vertical milling machine with 79” X 16” table, speeds to 1300 RPM s/n 96/14OBRABIAREK FWA 41 M horizontal milling machine with 79” X 16” table, speeds to 1300 RPM s/n 92/82SHW universal toolmakers mill with 48” X 16” tilt and swivel table, horizontal spindle, vertical milling head, slotting head, ANILAM 3 axis DRO s/n 2822fORWARD (1996) vertical turret mill with 9” x 42” table, speeds to 2500 RPM, NEWALL 2 axis DRO s/n 6805TOS FNK 25 vertical turret mill with 49” x 11” table, speeds to 4500 RPM s/n 17891(2) ExCELLO 602 vertical turret mill with 42” x 9” table, speeds to 4000 RPM s/n 60212101, 60211257(3) fIRST LC 1 ½ VS vertical turret mill with 10” x 50” table, speeds to 4500 RPM s/n 11218023, 80813501, 73115132DECKEL KF1 3 dimensional duplicating machine, with 17” x 23-1/2” copy table, 9” x 25-1/2” engraver table, 15-3/4” x 15-3/4” drag table s/n 2037SUNSTRAND RIGIDMILL horizontal production milling machine with 14” x 78” table s/n n/a

MILLING MACHINES

MAS (1996) VA 50 5’ way type radial arm drill with speeds to 2500 RPM, #5 MT, box table, coolant s/n 3543HAvLIK Z3040 5’ radial arm drill with speeds to 2000 RPM, #4 MT, box table s/n 003789BERGONZI TM 50 5’ radial arm drill with speeds to 1400 RPM, #5 MT, box table s/n n/a

RADIAL ARM DRILLS

BLANCHARD #18 rotary surface grinder with 36” table, 18” under wheel s/n 3664TOS hydraulic surface grinder with 16” x 59” magnetic chuck, incremental down feed, coolant, s/n n/aBLOHM HFS 9 hydraulic surface grinder with 12” x 36” magnetic chuck, wheel dresser, ACURITE 3 axis DRO, coolant, s/n n/aKENT (1995) KGS 63 AHD hydraulic surface grinder with 12” x 24” magnetic chuck, wheel dresser, incremental down feed, coolant, s/n 95036315ExCEL #3 hydraulic surface grinder with 8” x 24” magnetic chuck, coolant s/n n/aKENT KGS 250 H hydraulic surface grinder with 6” x 12” magnetic chuck s/n 790815-1(2) KENT (1995) KGS 200 manual surface grinder with 6” x 12” magnetic chuck s/n 9511015, 870551-8DECKEL SO tool lip grinder s/n 81636

GRINDING DEPARTMENTBERGONZI TM 50 5’ radial arm drill

COMPAIR 148 PLUS hydrovane air compressor MILLER SYNCROWAVE 351 TIG & stick welder

30 HP

36” CHUCK

PRvOMAJSKA SU10 vertical band saw

KENT 12” x 24” hydraulic surface grinder

TARNOW TUJ 24”/32” X 120” gap bed engine lathe

LARGE QUANTITY Of MACHINE SHOP EQUIPMENT AvAILABLE

BAxTER VERTICUT vertical band saw

3

This brochure is only a partial listing. PLEASE VISIT OUR WEBSITE FOR MORE DETAILED LISTINGS AND PHOTOS www.corpassets.com

HAvLIK Y41 100 hydraulic straightening press with 100 ton cap., 79” X 22” bed s/n 75108BUSY BEE SB612 combination belt and disk sander s/n n/aTORRIT dust collector s/n n/aMILLER SYNCROWAVE 351 TIG & stick welder with MILLER WATERMATE 1A cooler, cables & guns s/n KD537214BROWN BOGGS 148 4’ X 14 ga. mechanical shear s/n n/aLINCOLN AC DC 225 stick welder s/n W353 31MMAS VS 32 gear head drill s/n 671940SP 210 rocker arm spot welder s/n n/a

MISCELLANEOUS EQUIPMENT

PRvOMAJSKA SU10 vertical band saw with 42” throat, blade welder/grinder s/n 9-0016-76INTERNATIONAL 15” horizontal band saw s/n 3474(2) BAxTER VERTICUT 115 roll in type vertical band saw s/n 323, 2125MEP RABBIT 351 cold saw s/n 2062

SAWS

MITUTOYO (1991) BH710 CMM with 68” X 32” table, travels; X-27.5”, Y-39.3”, Z-23.6”, RENISHAW PH1 probe, PC & printer s/n A9106007CONTINENTAL 96” X 48” X 10” granite surface plate with stand s/n 551-0RAHN 48” X 36” X 8” granite surface plate with stand s/n n/aALSO: assorted micrometers, verniers, height gauges, gauge blocks, etc.

INSPECTION DEPARTMENT

TARNOW (1985) TUJ 50M X 3000 gap bed engine lathe with 24/32” swing, 120” between centers, 3.5” spindle bore, speeds to 1600 RPM, inch/metric threading, chucks & steadies s/n 2426TOS SN50B gap bed engine lathe with 20/26” swing, 80” between centers, 2.25” spindle bore, speeds to 2000 RPM, inch/metric threading, checks & steadies s/n 050200802050OKUMA LS 18” X 60” engine lathe with 2.25” bore, speeds to 1100 RPM, threading, coolant s/n 4502

LATHES

(2) COMPAIR 148 PLUS 30 HP hydrovane air compressors s/n CD21A4150A00041, n/aULTRA AIR UA200AC air dryer s/n 40-39757-12HIROSS DGB 030 air dryer s/n n/a

AIR COMPRESSORS & DRYERS

CLEARING F2 250-84 double crank straight side press with 250 ton cap., 60” X 84” bed, 28.75” X 17.75” windows s/n 10604-1(2) JAYBIRD J20 30 24 air feeder and straighteners with 30” stock width, 24” stroke s/n 3503, 3290AMERICAN STEEL LINE 1848 air feeder with 48” stock width, 18” stroke s/n 1720 BRATTAN TOOL CS7.5HP30W60D15000LB4P5S 15000 lbs. combination coil cradle & straightener with 30” stock width s/n 1145

PRESS ROOM EQUIPMENT

OKUMA LS 18” X 60” engine lathe

KENDALL & GENT CVM 60 bed type vertical milling machine

View of turret milling machines

TOS 20”/26” X 80” gap bed engine lathe

SHW universal toolmakers mill

CATERPILLAR T80C 8000 lbs. LPG forklift with 130” vertical lift s/n 94M906YALE GLP060SANFBS086 6000 lbs. LPG forklift with 130” vertical lift s/n A305341MOBILE LIfT B50WPff 1500 lbs. die lift s/n 1146

MATERIAL HANDLING

1995

120” CENTERS

80” CENTERS

5 AvAILABLE

ONSITE

KENT 6” x 12” manual surface grinder

View of tool holders

AMERICAN STEEL LINE 1848 air feeder

Partial view of toolingAMERICAN coil reel

BRATTAN TOOL 15000 lbs. combination coil cradle & straightener

JAYBIRD J20 30 24 air feeder

Printed in Canada. ©2011 CORPORATE ASSETS INC. ALL RIGHTS RESERVED.

MEMBER INGOOD STANDING

PRESS ROOM AND fACTORY EQUIPMENT

DAITO PRECISION INC.World Class Precision CNC Machining and Flexible Machining Facility St. Laurent (Montreal), Quebec H4S 2A6Thursday, April 14, 201110:00 A.M. EDT

ULTRA AIR UA200AC air dryer

DECKEL KF1 3D duplicating machine

Surplus Assets ofALSTOM MANUFACTURING GATINEAULarge Variety of Fabrication Equipment, Welding, Material Handling & Factory Support EquipmentGatineau, Quebec J8Z 1W1Tuesday, April 19, 201110:30 A.M. EDT

HARRINGTON TOOL & DIE INC. / OUTIL & MATRICE HARRINGTON INC.Large Capacity CNC Turning, Milling, Boring and Cold Forming FacilityBrossard (Montreal), Quebec J4Y 2H1Thursday, May 12, 201110:00 A.M. EDT

WESTPORT MACHINING LIMITEDHigh Precision CNC Turning, Milling and Machining FacilityPort Colborine, Ontario L3K 5A5Thursday, April 28, 201110:00 A.M. EDT

Surplus to the Ongoing Operations ofJOE’S WOODCRAFT OF WINDSOR LTD.Kitchen Cabinet ManufacturerWindsor, Ontario N9H 1K9Thursday, April 21, 201110:30 A.M. EDT

Angle plates, box tables, machine accessories, 195” X 100” X 11” floor plate, large selection of BT 40 and CAT 50 tool holders, tool cabinets, steel work benches, saw horses, steel inventory, office furniture, computers and MUCH MORE!

ALSO:

View of forklifts available

Partial view of tool holders

1/2 ton jib & hoist

Partial view of machine accessories availableSP 210 rocker arm spot welder

TORRIT dust collector

MEP RABBIT 351 cold saw

CLEARING 250 ton press

HUGE QTY AvAIL.

AUCTION DETAILS

APPRAISAL SERVICES

AUCTION CONDUCTED BYCORPORATE ASSETS INC.For further information contact us at:

2 St. Clair Ave. W., Suite 1002Toronto, Ontario, Canada M4V 1L5

Tel: (416) 962-9600 • Fax: (416) 962-9601Email: info@corpassets.com

Web: www.corpassets.com

Toronto • Montreal • Chicago

What’s the real value of your equipment? If you require a detailed appraisal for banking, insurance, or internal purposes, consult with the certified experts at Corporate Assets Valuations. We provide appraisal services anywhere in the world for all types of industrial manufacturing and processing equipment. • We will appraise one machine or your complete plant

• Going Concern, Fair Market or Liquidation Values Call us in complete confidence today with your requirements. Phone: (416) 962-9600 Fax: (416) 962-9601 Email: appraisals@corpassets.com

AUTODIE CORPORATION

INSPECTION Monday, April 11, 2011 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction.

REMOVAL Small items: Wednesday, April 13, 2011 by 5:00 P.M. Remaining items: Thursday, April 28, 2011 by 5:00 P.M.

DIRECTIONS Visit our website at www.corpassets.com, click on Upcoming Auctions: AUTODIE CORPORATION button, click on Map tab and get directions by accessing the pop up address info box.

ACCOMMODATIONS & CAR RENTALS Please visit our website for details at www.corpassets.com

PAYMENT Please visit our website for details at www.corpassets.com A Buyer’s Premium will apply at this sale.

WeAcceptPlease visit our website as specific terms and conditions may apply.

TERMSCorporate Assets Inc. assumes no liability for errors or omissions in this brochure. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

www.corpassets.com

Live Webcast bidding powered by

We offer the convenience of

3 Ways To Bid!• Bid in Person• Bid via Webcast• Bid by Proxy

Discover the ease ofbidding with our

LIVE WEBCAST!This feature gives you the ability to bid live by webcast from the convenience of your telephone from anywhere in the world! Visit our website for details.

Please register a minimum of 24 hours in advance to qualify to bid.

BID, BUY & GO!™L I V E W E B C A S T

Webcast powered by: