PRS INTERNATIONAL BVprs-international.nl/wp-content/uploads/PRS-Company-Presentation.pdf · PRS...
Transcript of PRS INTERNATIONAL BVprs-international.nl/wp-content/uploads/PRS-Company-Presentation.pdf · PRS...
PRS INTERNATIONAL BV
COMPANY INTRODUCTION
PRS International B.V. is based in The Netherlands and is a fast growing Industrial service company for, both onshore and offshore. Offering Specialized Services, solutions and equipment for the pipeline, petrochemical and refinery industry.
PRS International B.V. is able to offer the specialized services throughout Europe, the Middle East and the Far East either from the base in The Netherlands or through one of the International Offices.
Expertise combined with advanced technologies deliver effective cleaning, drying, testing and other process and pipeline solutions.
Welcome
Introduction
- Pipeline Inspections (ILI & DCVG)
- Pipeline Intergrity Consultancy
- Pipeline Pigging
- Pipeline Testing & Drying
- Pipeline Pneumatic Leak Testing
- Pipeline Inhibitor pigging
- Pipeline Cleaning On- & Off-line
- Pipeline Insitu Coating
- Pipeline Chemical Cleaning
- Pipeline Decommissioning
Pipeline Services
Nitrogen Services
- Leak & Pressure Testing
- Helium Leak Detection
- Accelerated Reactor Cooldown
- Pipeline Freezing Plugs
- Nitrogen Purging & Inerting
- Nitrogen Drying of Pipelines &
Process Plants
- Pipeline Displacements
- Foam Inerting
- Jet-blast Cleaning
- Hot-oil Flushing
- Chemical Cleaning
- High Pressure Cleaning
- Bolt-torquing/Tensioning
Process Services
- Steam & Air Blow Services
- Chemical Cleaning
- Final Drying
- Gas-up And Consultancy
Commissioning Services
PIPELINE PRE-COMMISSIONING SERVICES;• Pipeline Flooding Testing And Dewatering• Pipeline Geometry Survey• Pipeline Drying Using Air• Pipeline Drying Using Nitrogen
PIPELINE CLEANING SERVICES; • Pipeline Product Displacements• Mechanical Cleaning (Pigging)• Chemical Cleaning
PIPELINE MAINTENANCE SERVICES;• Internal Coating• Temporary Pipeline Repairs
Pipeline Pre-Commissioning
Preparing pipelines for pigging & inspections
Hydrostatic testing
High pressure nitrogen testing
Nitrogen / helium leak testing
Fully equipped test cabins
TEST PERSONNEL CERTIFIED FOR:
BS8010, BRITISH GAS BGC/PS/PT1 &PT3
DVGW G469
GASUNIE CSW-19-N
Pipeline Services
Portable Data Logging Tool
- Provides data in operational parameters and
Analysis of pig behavior.
- Measuring: pressures, temperature, rotation,
acceleration – 3d
*NO DIRECT DISTANCE MEASUREMENT*
Pipeline Pigging
Portable Data Logging tool
Studded pigs for scale removal
BiDi pigs for batching and cleaning.
Foam pigs for dryingand brushing
Pipeline Pigging
TRANSMITTER
Pipeline Pigging
Online cleaning, removal of dust, liquids and sand
Wax, paraffin and asphaltene removal from crude and fuel oil pipelines
De-oiling, for pipelines that will be prepared for other products
De-rusting of oxygen- and product pipelines
Inhibitor pig runs for H2S pipelines
Pipeline Cleaning
Pipeline Insitu Coating
Pipeline Rehabilitation Services Process:
In-Situ coating application whereby a two compound Epoxy coating will be applied to inside pipe-wall between pigs.This will allow several kilometers of pipeline to be coated without cutting the pipeline.
Uncoated Coated
SILENCER
NITROGEN PRODUCTproduct
SILENCER
Tank storage
Filters
Flaring
Nitrogen can be used to pig and displace pipelines usingthe expansion capacities of liquid nitrogen.
Products can be send to storage facilities or throughfilters in other pipeline sections or just vented off through flares,
Pipeline Displacements
Reactor Cool-down Services
Are developed to accelerate the cool-down process minimizing down time prior to catalyst change and lower the reactor entry temperature for safer and faster work.
Basic procedures:- Using LN2 to cool down the recycle gas (most efficient).- Once trough method.
Nitrogen Services
After the initial cool-down
to temperatures of 150 – 250˚c
the accelerated cooldown
process will take over and
the cool-down rate will be
increased using cold Nitrogen
gas to temperatures < 40˚c
Nitrogen can also be used for the
hot stripping of hydrocarbons
from the catalyst.
Nitrogen Services
Helium Leak Testing Services
Pressurizing process systems to 95% of the PSV setting usingNitrogen with 1% Helium as a tracer.Flanges will be taped off and checked for leaks.
Nitrogen Services
Nitrogen Foam Inerting
PRS’s Nitrogen foam in-erting is a simple yet effective process that enables hot work to be carried out on hydrocarbon handling systems in complete safety.
The Nitrogen foam is injected into a process system at a lowpoint and allowed to completely fill the vessel and pipework,rendering the internal atmosphere inert.
On completion of hot work operations, the Nitrogen foam degenerates into small amounts of water, surfactant and gaseous Nitrogen.
Nitrogen Services
Typical foam in-erting applications include vessel and pipework modification and / or replacement, hot cutting and system de-commissioning.
All components of nitrogen foam are biodegradable andnon-bio accumulative.
Nitrogen Services
Pipe Freezing Services
Pipe-freezing is an essential tool in the maintenance of all types of liquid storage, process and transfer plant. The range of applications in which pipe-freezing can provide cost effective solutions is both extensive and diverse, from a small domestic water pipe to a huge oil pipeline, from a hospital heating system to a brewery bulk storage system, the freeze can be applied quickly and the results are reliable.
TYPICAL FREEZE PLUG SET-UP ALLOWING TEMPORARY PIPELINE ISOLATIONS.
Nitrogen Services
Under Ground Tank & Line Leak Testing
The portability and light weight of the PRS heli-test equipment (varianPHD-4) plays a major role in this application.
Underground pipelines and storage tanks (ugst) are pressurized with Helium which, due to its high mobility, can escape through small leaks and migrate to the surface. There it can be easily detected by the phd-4.
Nitrogen Services
Chemical Cleaning
In addition to the standard cleaning methods, PRS International offers a broad range of chemical cleaning services for pipelines, process systems in the process industry and power plants.
Using solvents and/or surfactant bases cleaning chemicals are more effective than the traditional mechanical cleaning methods.Chemical cleaning is widely used for commissioning and de-commissioning of pipelines and process plants to increase productivity (throughput) and efficiency, to improve inspections results, to maintain the quality of the product.
In pipelines the use solvents and/or surfactant based cleaning chemicals are more effective than the mechanical cleaning using only pigs.
Chemical Cleaning
Steam And Air Blowing Services
Steam blowing and air blowing are basically alternative techniques used during the commissioning of new steam raising plant. They are performed to ensure that potentially damaging debris is removed from the steam lines before the steam is admitted to equipment that may be damaged by such debris, in particular steam turbines.
Typical steam-blow operation in progress
Steam & Airblow Services
PRS International B.V.Modem 327741 MJ – CoevordenThe Netherlands
Tel. : +31 524 599 980Fax. : +31 524 599 988Email : [email protected]
Contact