Protective Coverings Catalog - Suburban Manufacturing
Transcript of Protective Coverings Catalog - Suburban Manufacturing
Suburban Manufacturing Inc. is certified ISO 9001:2008
Understanding the Problem ....................................................................... 3
Engineering Solutions ................................................................................ 4-5
Why Use Sleeve and Straps ...................................................................... 6
Solutions
Protective Sleeves
Suburban Sidewinder Sleeve® ................................................................. 7-10
Fire Sleeve ................................................................................................... 11
Application Photos ..................................................................................... 12-13
High Temperature (HT) Sleeve ................................................................. 14-17
Diamondback Sleeve .................................................................................. 18-21
Python Straps®
Python Straps® - Cinch and Hanging ...................................................... 22-23
Merchandiser Display Kits ........................................................................ 24
Index
2 800.782.5752
Judging by the label, they must have figured the clamp would lead to failure (under warranty).
Notice how the cover and sticker have been gouged by the clamp.
Over time, fixed clamps may damage the hose. Protective sleeve would have likely saved this hose
casing from being damaged
With the increased sophistication of controls, higher working pressures, and flow rates, hydraulic systems have become more complex.
Traditionally, machine design has left plumbing routing as one of the last areas to address. Our products are designed to address performance
issues encountered by current systems.
Understanding the Plumbing Problem
Hydraulic plumbing has changed dramatically in the last fifteen years. Machines have become “power units” for a vast array of attachments.
Hydraulic systems have become more complex with the increasing sophistication of controls, higher working pressures, and flow rates that
are used today.
Machine design traditionally has left the plumbing routing as one of the last areas to address. Our products are designed to address the perfor-
mance issues that current systems encounter.
- Clamping and containment is not well served with the “One size fits all” concept. - Nylon ties can cause hose pinching resulting in casing wear. They are also subject to breaking after long term UV exposure and lack of
flexibility to allow for hose pressurization and contraction. - Traditional clamps do not allow for easy plumbing changes needed for timely attachment changes. - Welded rings and clamps can also cause abrasive wear to hose or cable casings. - Traditional clamping requires adequate mounting space and is not expandable. - Conventional sleeve used for bundling is both difficult and time consuming to replace. - Many applications demand more than abrasion protection. They must also deal with high temp issues, operator hose leak and burst protec-
tion, electrical current isolation and other adverse operating environments. - Lack of adequate routing space and ability to meet extreme range of motion requirements.
Solutions for Plumbing Problems
3 www.gosuburban.com
Low cost non-invasive
solution to zip ties Hot molten metal protection Pinch point protection
Range of motion, Contact, and Operator Safety
Safely control the range of motion and contact while providing operator safety with our high tech removable textile covers and restraints.
Our products are designed to hold and protect hoses, cables and wiring without impeding movement and transfer abrasion: Suburban
Sidewinder (wrap), Diamondback (tubular), and Python (straps). Most products are standard stock which provides a platform for low cost
application specific (custom) product.
Engineering Solutions
• No interference with range of motion
• Movement without hose to hose abrasion
• Reduced installation labor, allows for outstanding serviceability
• Easy expansion/removal of hose bundles
• Additional ‘close proximity’ personnel protection
• Abrasion protection in hard to reach areas
• Isolate hoses and hose bundles from high temperatures
4 800.782.5752
Our application engineers are creating special custom solutions every day – sleeves with straps, special tethers and hardware, extreme
abrasion as well as high temperature application.
The origination and continual improvement of our products is a direct response to application needs. We are constantly addressing new and
challenging requirements from every conceivable market sector. This method of operation gives us the ability to provide immediate
solutions to most applications, available in just a few days!
Our sleeve materials cover the whole spectrum of application requirements for abrasion, high temperature and specialty re-
quirements. We can assist you in choosing the right sleeve for the application.
Engineering Solutions - Ask Us!
5 www.gosuburban.com
Suburban Sidewinder Sleeve®
• Can be “featured” or customized to perform protection and
mounting duties, reducing parts and costs.
• Can be utilized without disconnecting hoses which eliminates the
risk of contaminating the hydraulic system.
• Allows for easy bundling of hoses and cables without over binding
or creating hose abrasion.
• Allows natural movement of hose while restricting motions in force
routing situations.
• Five high temp materials for Tier 3 and 4 Diesel applications
• Available in many materials for different applications.
• Meets intent of EU Machinery Directives
• Reduces installation labor time by up to 70%.
Diamondback Sleeve
Hybrid, tubular sleeve - needle woven to produce a tighter, smoother sleeve.
Keeps pin-hole oil leaks in check - reducing the environmental impact.
Delivers optimum U.V. and abrasion protection.
Can be cut to any length.
Python Straps® - Cinch and Hanging
• Effective replacement for nylon tie straps and hose clamps
• Stands up to U.V. exposure – remains flexible and strong
• Wide and non-evasive - will not pinch or crimp hoses or cables
• Offers quick access to bundles when switching attachments
• Heavy duty straps are capable of securely mounting heavy hydrostatic bundles
• Permits expansion & contraction of high pressure hoses & are superior to rigid mounts
• Available in standard and heavy duty versions
• Secure, non-damaging bundling and mounting options are available
• Meets intent of EU Machinery Directives
Cinch Strap
Hanging Strap
Why Use Protective Sleeves & Straps?
Meets or Exceeds:
� European Line Of Sight legislated specification
� ISO 6945 Abrasion standards
� EN414 & EN474-1 & EN500-1
� ISO 8031 Conductivity requirements
� Meets NSW guideline for fluid power safety at mines
� EN982 ISO NORM 833
� ISO NORM 3457
� MSHA IC 234/0
6 800.782.5752
This is a list of the sizes available.
Sample Part Number is SL-2.0-1050B
*This is for a 2 inch diameter sleeve of 1050 Ballistic Nylon
Part #
Bundle
O.D.
(Inches)
Circum
(Inches)
Flat Width
(Inches)
Hook &
Loop Width
(Inches)
SL-1.0 1.0 3.14 3.89 0.75
SL-1.5 1.5 4.71 5.46 0.75
SL1.75 1.8 5.50 7.00 1.50
SL-2.0 2.0 6.28 7.78 1.50
SL-2.38 2.4 7.47 8.97 1.50
SL-2.5 2.5 7.85 9.35 1.50
SL-2.75 2.8 8.64 10.14 1.50
SL-3.0 3.0 9.42 10.92 1.50
SL-3.25 3.3 10.21 11.71 1.50
SL-3.5 3.5 10.99 12.49 1.50
SL-4.0 4.0 12.56 14.06 1.50
SL-4.5 4.5 14.13 15.63 1.50
SL-5.0 5.0 15.70 17.20 1.50
SL-6.0 6.0 18.84 20.34 1.50
SL-7.0 7.0 21.98 23.48 1.50
SL-8.0 8.0 25.12 26.62 1.50
Size Available
7 www.gosuburban.com
Typical Applications:
Best all around substrate for most applications. Well suited for bundling, abrasion and operator protection (EN982, ISO
NORM 833, EN414). Used on mobile equipment, industrial machines, covering cable and
wiring bundles. Not for welding.
• Material: Mil-Spec 1050 Ballistic Nylon,
1.7 mil urethane coating
• Temperature Range: -60° to +250° F
• Abrasion: Very good; meets ISO 6945 specifications
• Puncture/Tear: Excellent; very puncture and tear resistant
• UV protection: Very good; meets EN13758-1
max rating of 80 New/Dry
• Chemicals: Very good resistance to water & petroleum
• Wicking: Good; sheds surface moisture
• Welding Sparks/Spall: NOT recommended
1050 Ballistic Nylon is the most commonly used Sidewinder Sleeve material for
abrasion protection of industrial hydraulic hoses and hydraulic cylinders
1050 Ballistic Nylon Material Features Sample PN: SL-2.0-1050B
• Material: 1000 Denier Cordura (10.5 oz.)
with 7 mil urethane coating
Meets MIL-C-83489, FED-STD-191A, MIL-STD-810F
• Temperature Range: -60° to +250° F
• Abrasion: Excellent; meets ISO 6945 Specifications
• Puncture/Tear: Very good; resists tearing
• UV protection: Excellent; meets EN13758-1, top rating of 80 New
• Chemicals: Very good resistance to water and petroleum
• Wicking: Excellent resistance to absorbsion
Typical Applications:
Great for most mobile and industrial applications, an excellent choice for bun-
dling hoses, wires, and cables. The heavy urethane coating provides super low
coefficient of friction as well as excellent abrasion resistance for wet, high UV
and crisp edge applications and remains very flexible regardless of temperature.
Operator protection meets EN982, ISO NORM 833, EN414.
5601 Material Features Sample PN: SL-2.01
8
Suburban Sidewinder Sleeve®
800.782.5752
• Material: 600 Denier material
With PVC Coating
Meets MIL-C-83489, FED-STD-191A,
MIL-STD-810F
• Temperature Range: -0° to +200° F
• Abrasion: Fair; Lightweight
• Puncture/Tear: Fair
• UV protection: Good; meets EN13758-1,
top rating of 80 New
• Chemicals: Very good resistance to water,
petroleum products, and
detergents
• Wicking: Excellent; Non wicking
• Welding Sparks/Spall: NOT Recommended
• Material: Architectural PVC coating over a
1000 Denier substrate
Meets MIL-C-83489, FED-STD-191A,
MIL-STD-810F
• Temperature Range: -20° to +150° F
• Abrasion: Very Good; tough & lightweight
Meets ISO 6945 Specifications
• Puncture/Tear: Fair to Good; resists punctures
• UV protection: Excellent; meets EN13758-1, top rating of 80 New
• Chemicals: Very good resistance to water, petroleum products, and
detergents
• Wicking: Excellent; non wicking
Typical Applications:
Tough outdoor applications such as covering hose used on the
ground, mud pumping for well drilling, remote construction tools.
Typical Applications:
Lightweight bundling of hoses, cables and wires.
Heavy Duty Abrasion - 40HDA Sample PN: SL-2.0-40HDA
Black Poly (300X600 DP) Material Features Sample PN: SL-2.0-JD
9
Suburban Sidewinder Sleeve®
www.gosuburban.com
• Material: 1000 Denier Cordura, Double Coated with Proprietary High
FR Neoprene Meets MIL-C-20696E, Type 2, Class 1
• Temperature Range: -40° to +250° F, momentary spot heat up to 800° F
• UV protection: Excellent; Best Barrier, meets EN13758-1, top rating of 80 New
• Chemicals: Excellent, unaffected by water, petro chemicals, sea water, oils, mild solvents
• Abrasion: Very Good/Excellent; drag abrasion from welding spall, concrete floor.
Meets ISO 6945 specifications
• Welding Sparks/Spall: Excellent; Resist and sheds sparks and hot spall
• Puncture/Tear: Excellent; Resists puncture or tear
• Wicking: Excellent; non wicking
18411 Material Features Sample PN: SL-2.0-18411
Typical Applications:
Great for robotic welders and machinery to protect hoses, cables and
wiring from sparks.
• Material: Plain Weave Fiberglass with coating on both sides of
proprietary FR neoprene coating
• Temperature Range: -40° to +400° F continuous exposure
-40° to +750° F intermittent exposure
• Abrasion: Fair; not recommended for applications with abrasion
resistance
• Puncture/Tear: Excellent; extremely difficult to puncture or tear
• UV protection: Excellent; best barrier, meets EN13758-1,
top rating of 80 New
• Chemicals: Excellent, unaffected by water, petro chemicals, or
mild caustics
• Wicking: Excellent; non wicking
• Welding Sparks/Spall: Excellent; shields molten metal to 3000° F when on an
incline of 15°
Weld Shield (24B-60) Material Features Sample PN: SL-2.0-WS
Typical Applications:
This is an excellent choice for welding cables or hose that
is dragged across the floor. This material is frequently
used on drill rigs and in sub-sea maintenance to protect
hoses from barnacles, sea life, and salt water.18411 is also
used in automation.
Suburban Sidewinder Sleeve®
10 800.782.5752
INSULTF
INSULTHM
INSULTF is a braided fiberglass sleeving that has been heat treated and impregnated with and
acrylic binder to reduce fraying and dusting, and improve usability and performance. INSULTF
was engineered for applications where temperatures as high as 1200°F may be encountered.
INSULTF may also be used as insulation and protection for small heaters and resistors that
operate at high temperatures, and to insulate over soldered connections when exposure to solder
melt temperatures is possible.
♦ UL Recognized : VW-1
♦ Rated to 464°F
♦ For High Temp - Low Voltage Applica-
tions
♦ Easy to Install - Cuts with Scissors
♦ Resists Most Organic Solvents
♦ Cut and Abrasion Resistant
Part Number Diameter Wall Thickness Shop Spool
INSULTF04 0.263” 0.010 100’
INSULTF06 0.375” 0.010 50’
INSULTF08 0.500” 0.010 50’
INSULTF10 0.625” 0.010 50’
INSULTF12 0.750” 0.010 50’
Part Number Nominal Size Maximum Diameter
INSULTHM04 1/4” 3/8”
INSULTHM06 3/8” 5/8”
INSULTHM08 1/2” 3/4”
INSULTHM10 5/8” 7/8”
INSULTHM sleeve is an extremely high temperature resistant sleeve which is commonly used as thermal
protection for cables, wires, and hoses that are subject to continuous and extreme high temperature envi-
ronments such as engine manifolds and exhaust systems.
INSULTHM is braided from fiberglass yarns and coated with high temperature resins. INSULTHM is
extremely tough and durable, maintaining its tight structure under extreme vibration, abrasion, mechanical
stress and temperature variations. INSULTHM installs easily over a variety of applications to either
deflect or retain heat in environments up to 1,200°F
♦ UL Recognized
♦ Resin Coated, Heavy Weight Fiberglass
♦ Won’t Burn, Melt or Become Brittle
♦ Easy to Install - Cuts with Scissors
♦ Resists Gasoline and Engine Chemicals
♦ Cut and Abrasion Resistant
High Temperature Sleeving
INSULTHM12 3/4” 1 1/8”
INSULTHM14 7/8” 1 1/4”
INSULTHM16 1” 1 5/8”
Part Number Nominal Size Maximum Diameter
Shop spool = 50’
Fire Sleeve
Technical Description: Fire Sleeve is constructed from a high bulk fiberglass fiber that is woven to produce
a hollow sleeve. It is coated with a thick covering of iron oxide red silicone rubber.
Temperature Capabilities: Rated for 500°F (260°C) continuous exposure, up to 2000ºF (1093ºC) for 15-20
minutes and up to 3000ºF (1650ºC) for 15-30 seconds.
Product Overview: Fire Sleeve is a sleeve that can be easily installed over hoses, cables, tubing or pipes.
It offers excellent resistance to molten metal splash, radiant heat, abrasion, corrosive
atmosphere, moisture, chemicals, vibration, and electricity.
In addition to protecting hoses, cables and pipes etc., Fire Sleeve can protect people
from incurring scorching burn injuries on hot braided hoses and pipes.
Fire sleeves excellent moisture resistances make it ideal for use outdoors
Dimensional Data: Available in diameters from 1/4” (6mm) to 5” (125mm). Standard lengths are 50 ft
(15 mtrs) and 100ft (30 mtrs)
Nominal wall thickness – 0.135” (3.43mm)
11 www.gosuburban.com
Above:
Custom 5601 sleeve with heavy Urethane
coating and straps prevent abrasion from
steering components
Custom sleeve for OEM application.
High temp sleeve protects hydraulic hoses
from abrasion and high
temperature weld spall.
HOT refueling application for military
helicopter. Sidewinder Sleeve is wrapped around
refueling line to protect expensive
refueling line from abrasion.
Available Upon Request (RFQ):
1. Cut to length 7. Straps or tethers attached to sleeve
2. Printed part #, and/or logo. 8. Grommets attached for hanging sleeve
3. Reflective radial straps 9. Lift sling attached to add lifting capacity
4. Fabricated long lengths 10. Materials for extreme heat
5. Materials for extreme abrasion 11. Hook and loop closures –60° F to 600° F 6. Diameters of any length 12. Operator protection
Thousands of Custom Parts
Redundant optical retention for cam lock
coupling for oil field applications
Special custom sleeve covers high
temp tubes on a road patcher head
preventing against operator injury.
Suburban Sidewinder Sleeve®
12 800.782.5752
Thousands of Custom Parts
Custom strap with quick release buckle prevents contact & wear
Custom sleeve installed to bundle and route the hydraulic hoses
Custom Sleeve on oil rigs
Special sling sewn to sleeves supports
large 2000 lb. oil rig bundles
Suburban Sidewinder Sleeve®
13 www.gosuburban.com
Covers (Choose One):
The different Cover choices are listed in order of temperature ratings
from low to high. Note that they are used with an insulation layer that
dramatically reduces the contact heat or hot face that the cover is exposed
to. All fiberglass and silica fabrics are listed at their peak temperatures for
continuous use. The coatings are subject to degradation with direct con-
tact above rated temperatures. What happens is that the coatings will lose
their elastomers and dry out above rated temperature.
18411: High FR proprietary Neoprene coated 1000 denier Cordura.
Temperature: Up to 250° F (oven heat) Welding spall/sparks: Up to 800° F (spot heat) Best choice for abrasion applications; well suited for welding spall, ballast rock, oil shale.
Applications: Welding, cutting, hot tar and asphalt, spray foam polymers
EJ-1650: Teflon coated fiberglass
Temperature: Up to 550° F (oven heat) Welding spall/sparks: Up to 1000° F (spot heat) Mild abrasion
Excellent acid chemical resistance
Application: robotic welding, hot tar, asphalt, hot chemical, wire and hose protection near
external exhaust.
1. The System - Start with the Cover
24B-60 Weld Shield: High FR neoprene coated fiberglass
Temperature: Up to 400° F (oven heat) Welding spall/sparks: Up to 1000° F (spot heat) Not suited for abrasion
Applications: Welding, cutting, Outer barrier for most
engine applications.
All hot hose applications as a cover.
Insulflex 1600: Silicone coated fiberglass (Core cover material for engine applications, 16 oz natural)
Temperature: Up to 550° F oven heat Core fabric E-glass is rated: 1200° F Not suited for abrasion
Applications: Used on 95% of exhaust covers and sleeve products made.
1750SA-2: Silicone coated fiberglass (Heavier cover material 17oz Plus)
Temperature: Up to 550° F oven heat Core fabric E-glass is rated: 1200° F (spot heat) Mild abrasion
Applications: Exhaust sleeves and covers where rub contact of hoses or wiring may occur.
3000SA-2: Heavy silicone coated e-glass (34 oz and is 0.32” thick)
Temperature: Up to 550° F oven heat Core fabric E-glass is rated: 1200° F (spot heat) Mild abrasion
Sidewinder HT Exhaust Covers
14 800.782.5752
Tempmat: E-Glass Needle Felt
Standard use ¼”
Special use ½”
Temperature: 1000° F Continuous
1200° F Peak
Ceramic Fiber Mat
Standard use 1/8” - 1/4”
Temperature: 2300° F Continuous
1. 17 oz woven fiberglass fabric, uncoated.
This is sewn in as a liner to protect and support
the needle felt.
Recommended for parts that will be removed
& reinstalled occasionally.
Temperature: 1100° F Hot face
1500° F Peak
2. 12 oz Amorphous silica woven fabric, uncoated.
This is sewn in as a liner on any extremely high temp sleeves.
Temperature: 1800° F Hot face
2500° F Peak
3. Stainless Steel: 100 Mesh Screen
0.008” Liner
Temperature: 1000° F
Threads (Select One):
Texs50: Twaron 30/3 thread
Temperature: Up to 800° F Max
KSS10-1: Kevlar/stainless steel thread. Filament Kevlar/.002type 304 SS
Temperature: Up to 1500° F
2. Insulation Materials: Select One
3. Liners: Select One
4. Threads
Sidewinder HT Exhaust Covers
15 www.gosuburban.com
Sidewinder HT offers a wide choice of hardware, closures, and straps. We offer these options so that this system can address not only the
heat requirement but the ease and speed of installation and vibration abrasion. These options also make maintenance easy and offer a range
of cost options.
5. Hardware
Sidewinder HT Exhaust Covers
16 800.782.5752
Nomex Hook and Loop:
This closure makes installation and
maintenance a breeze. Allows for
adjustability and forgives minor
misalignment. Standard Operating
Temperature: 350° F
Stainless Steel Zip Ties:
5/16 Stainless zip ties can be used in
stitched pockets around a sleeve or
loose external.
Stainless Quick Release Clamps:
Quick release stainless worm gear
clamps are an inexpensive heavy
duty solution that install in stitched
pockets or loose external.
Adjustable Spring & Stud Closure:
Allows for irregular diameters, clamps,
and complex bends.
Heavy Duty Steel Snaps:
Positive true aligned closure.
Normally installed on an edge flap
with an overlap for best sealing.
Kevlar/Stainless Drain Cord:
Quick pinch closure
Designing a sleeve or cover is a series of choices based on application parameters, installation requirements and budget.
1. What is the goal?
•Momentary operator protection?
•Radiant heat reduction to protect other components?
•Ancillary cable/hose protection from heat source?
•Total heat containment:
♦To maintain maximum temperature for particulate filters? ♦Parasitic heating of hydraulics in ultra cold environments?
•Will the part be exposed to the elements or enclosed?
•Will the part be subject to abrasion or wash down?
•Target cost?
2. Intallation requirements:
♦Production assembly time - easy to install ♦Position of closure, sensor ports or flange obstructions ♦Horizontal or vertical positioning ♦Vibration, high temperature and/or abrasion concerns ♦Service work - easy to remove
HT Sleeve Design considerations
Sidewinder HT Exhaust Covers
17
Line of Sight � Abrasion Protection � Bundling � OEM
Part# Flat Width (in) I.D. (in)
TEXS17 1.18 .67
TEXS20 1.22 .79
TEXS23 1.54 .91
TEXS25 1.65 .98
TEXS27 1.77 1.06
TEXS31 2.05 1.22
TEXS36 2.24 1.42
TEXS40 2.60 1.57
TEXS44 2.83 1.73
TEXS47 3.03 1.85
TEXS55 3.50 2.17
TEXS60 3.82 2.36
TEXS73 4.65 2.87
TEXS75 4.76 2.95
TEXS93 5.87 3.66
TEXS100 3.94 6.3
TEXS127 4.94 7.75
TEXS112 4.41 7.05
• Meets new “line of sight” operators specification EN982 ISO norm 833 EN414
• Ultra tight construction contains oil spillage from pin hole leaks
• Tight, smooth surface resists wear
• 50% less bulky than Cordura
• Densely twisted polyimide 6 yarn offers optimum UV and abrasion protection
• MSHA approved
• Meets abrasion standard ISO 6945
• Meets Conductivity to ISO 8031
• Dealer sleeve dispensers available
Hose Dash Size Multiplier
-4* 1.44
-6* 1.50
-8* 1.55
-10* 1.63
-12* 1.67
-16 1.70
-20 1.81
-24 2.00
-32 2.50
* Proper sizing is Hose OD x Mul�plier = Proper Sleeve ID
*Hose burst and pinhole leak tests have been conducted using identical test parameters
for both clamped and unclamped sleeves. The test results show proper sleeve sizing is
critical to achieve proper protection.
Sleeve should be cut 2” longer than hose length
Band-it clamps are recommended for securing sleeve to the coupling. All Information
listed is based on new product only. Any degradation of this product by environment or
application will affect performance. Proper use of product is the sole responsibility of
the user.
Sold in increments of 150’ and 300’ lengths
Minimum purchase order of $75.00
Diamondback Sleeve®
18 800.782.5752
Cross Reference Sheet and Sizing Chart
Diamondback Flat Federal
Sleeve Width I.D. Aeroquip Mogul Gates Partec Protec Weatherhead
Part NumberX-OVER.090
thick
X-OVER.090
thick
X-OVER.090
thick
X-OVER.090
thick
X-OVER.090
thick
X-OVER.090
thick
TEXS17 1.18 0.67FC425-12 (.71)
tight10-HG (.68)
AS-B-11 (.69)
tight
NHS-071(.71)
tight
TEXS20 1.22 0.79 PG-12 (.75 D) NHS-077 (.77)
TEXS23 1.54 0.91 FC425-15 (.92) 14-HG (.90) AS-B-13 (.86) NHS-090 (.90) A3900 (.90)
TEXS25 1.65 0.98FC425-16 (1.00)
tight
NHS-100(1.00)
tight
TEXS27 1.77 1.06FC425-18 (1.13)
tightPG-12 (1.0 D) 16-HG (1.06) AS-B-15 (1.06) A3901 (1.06)
TEXS31 2.05 1.22FC425-20 (1.25)
tight20-HG (1.22) AS-B-17 (1.22) NHS-114 (1.14) A3902 (1.22)
PG-20 (1.25 D) AS-B-19 (1.35) NHS-130 (1.30) A3903 (1.35)
TEXS36 2.24 1.42 24-HG (1.42) AS-B-22 (1.42) NHS-138 (1.38)
PG-24 (1.50 D) NHS-153 (1.53)
TEXS40 2.6 1.57FC425-24 (1.59)
tight
AS-B-27 (1.63)
TEXS44 2.83 1.73FC425-28 (1.75)
tightA3904 (1.66)
TEXS47 3.03 1.85 PG-28 (1.75 D) 28-HG (1.81) AS-B-33 (1.81) A3905 (1.81)
PG-32 (2.00 D)
TEXS55 3.5 2.17 FC425-32 (2.07) 32-HG(2.19)
tight
AS-B-35 (2.19)
tight
A3906 (2.19)
tight
TEXS60 3.82 2.36FC425-38 (2.38)
tightPG-36 (2.25 D)
38-HG(2.38)
tight
AS-B-37 (2.38)
tight
FC425-40 (2.54) PG-40 (2.50 D)
42-HG(2.62)
tight
AS-B-39 (2.63)
tight A3907 (2.62)
TEXS73 4.65 2.87 FC425-46 (2.86) PG-44 (2.75 D) 46-HG(2.88)
tight
TEXS75 4.76 2.95PG-76 (3.00 D)
tight
FC425-54 (3.34) AS-B-47 (3.13)
TEXS93 5.87 3.66 FC425-59 (3.66) AS-B-58 (3.63)
64-GH (4.40)
Inches
Diamondback Sleeve®
19 www.gosuburban.com
Diamondback Sleeve
Optimum OEM “Line of Sight” Operator Protection
Pressurized hydraulic hoses are a potential major hazard. Hose leaks can lead to serious injection injuries to equipment operators.
New legislation and amended safety regulations now require hoses within one meter of an operator to be covered with protective
sleeve.
Typical wear sleeve is not designed to protect operator from high pressure pin hole leaks or hose bursts.
Diamondback Sleeve was engineered specifically to meet the EU Machinery Directive 2006/42/EC as well as the NSW “Guideline
for Fluid Power System Safety at Mines”
Diamondback uses a proprietary engineered fiber.
It is needle woven very tightly and heat treated which shrinks the sleeve about 8% to the finished dimension.
When a hose bursts, the oil is released in an explosion of expanding energy. This release impacts the sleeve; the engaging fibers absorb
the energy at the cross over points where the sleeve fibers are interwoven. The ultra tight weave flexes, deflects the energy and resists
oil loss, reducing environmental impact.
•Meets EU operator protection directive •Dense weave and heat treat offers excellent U.V protection
EN982 •Meets ASTM D6770 for abrasion resistance
ISO Norm 833 •Meets ISO 6945 for abrasion tested over 250,000 cycles
EN414 •Meets FED-STD191-Test method 5309 for abrasion resist.
ISO 3457 •Meets conductivity standard ISO 8031
MDG 41 Mines Safety •Pin hole tested to 4000 PSI, Burst tested to 10,000 PSI*
EN500-1 •MSHA approved #IC-234/0 & IC-2340/01
Oil Ejected Here Oil Hit Glass Here
OEM � Line of Sight � Abrasion Protection � Bundling
Diamondback Sleeve®
20 800.782.5752
Hose Dash Size Multiplier
-4* 1.44
-6* 1.50
-8* 1.55
-10* 1.63
-12* 1.67
-16 1.70
-20 1.81
-24 2.00
-32 2.50
*Hose burst and pinhole leak tests have been conducted using identical
test parameters for both clamped and unclamped sleeves. The test
results show proper sleeve sizing is critical to achieve proper
Protection.
Sleeve should be cut 2” longer than hose length
Band-it clamps are recommended for securing sleeve to the coupling.
All Information listed is based on new product only. Any degradation of this
product by environment or application will affect performance.
Proper use of product is the sole responsibility of the user.
ISO 3457:2003(E) 9.1: Hoses containing fluid at pressures exceeding 725 PSI or temperatures above 60° C (140° F) located
within 1 meter of the operator in the normal operating position and whose direct spray (in case of failure) can reach the
operator - shall be guarded.
Toughest Single Line Hose Protection - Period!
{Proper Sizing is hose OD x Multiplier = Proper Sleeve ID (always round up)
Diamondback Sleeve®
21 www.gosuburban.com
All grommets are nickel plated brass grommets
Standard Duty
Cinch Strap
Heavy Duty
Cinch Strap Heavy Duty
Hanging Strap
Standard Duty
Hanging Strap
1. Allows hose to expand & contract, which eliminates damage related to using nylon ties.
2. Many sizes to choose from, dependable, bundles and secures multiple hoses or cables.
3. Fast and dependable, can cut installation time by 50%, NO tools required.
4. Excellent Resistance to UV
5. The closure is Mil-Spec extreme Python Hook & Loop. They will not fall off.
6. Thousands of uses: OEM’s Worldwide, Fire Departments, Agricultural Equipment, etc.
Cinch Straps Hanging Straps
Why Python® Cinch Straps & Python® Hanging Straps?
Heavy Duty Python Hanging Straps used to route hydraulic hoses
Python Cinch Strap used by Fire Department.
Python® Cinch & Hanging Straps
22 800.782.5752
Α. Standard duty has a delrin (plastic) Buckle
B. Heavy Duty has nickel plated steel buckle
C. Hanging straps have a grommet to mount strap
Standard Heavy Usable Circumference
CS404 CS404H 4"
CS406 CS406H 6"
CS408 CS408H 8"
CS409 9"
CS410 CS410H 10"
CS412 CS412H 12"
CS416 CS416H 16"
CS420 CS420H 20"
CS424 CS424H 24"
CS430H 30"
CS440H 40"
Standard Heavy Usable
Circumference
HS404 HS404H 4"
HS406 HS406H 6"
HS408 HS408H 8"
HS412 HS412H 12"
HS416 HS416H 16"
HS420 HS420H 20"
HS426H 26"
Cinch Straps
Please Note: Standard duty straps must be ordered 10 piece increments.
Heavy duty straps must be ordered in 5 piece increments.
Minimum purchase order of $75.00.
Hanging Straps
Python® Cinch & Hanging Straps
A. C. B.
Options Include:
23 www.gosuburban.com
Features
� Selection of either standard duty or heavy duty straps
� Each kit includes both cinch and hanging straps
� Re-order only the sizes you need
• Thousands of uses
• Straps are adjustable
• Showroom tested
• Combine straps to make any length
Merchandiser Display Kits
KS-0001 40 Heavy Duty Straps 20 Hanging, 20 Non-Hanging Cinch Straps
KS-0002 80 Standard Duty Straps 8 different sizes - 10 of each size Cinch Straps
SW-0492 60 Straps - Mixed 40 Standard Duty & 20 Heavy Duty Hanging
Increase Your Strap Sales with a Python Straps® Merchandiser Display
Python® Merchandiser Display KitsPython® Merchandiser Display KitsPython® Merchandiser Display KitsPython® Merchandiser Display Kits