Protect your investment Why ARC? ... Protect your investment Imatech Workshops and Site Service...

download Protect your investment Why ARC? ... Protect your investment Imatech Workshops and Site Service Teams

of 6

  • date post

    12-Jun-2020
  • Category

    Documents

  • view

    0
  • download

    0

Embed Size (px)

Transcript of Protect your investment Why ARC? ... Protect your investment Imatech Workshops and Site Service...

  • Why ARC?

    Head Office:

    Unit 7, 6 Gladstone Road

    Castle Hill , NSW 2154

    Australia

    For further information on how Imatech Abrasion & Corrosion can help you with your next project, please contact our head office or visit imatech.com.au.

    Mail To:

    PO Box 6467

    Baulkham Hills BC, NSW 2153

    Australia

    Contact:

    Australia (Toll Free): 1800 352 228

    International +61 2 8853 3000

    Fax: +61 2 9634 7145

    Email: abrasionandcorrosion@imatech.com.au

    ARC Composites are specifically formulated and engineered to be used in a wide range of harsh environments and conditions.

    • Outstanding adhesion

    • Superior mechanical strength

    • Permeation resistant

    • Outstanding wear resistance

    • 100% solids (no outgassing or shrinkage)

    • Solvent free

    • Chemical resistant

    For the protection, enhancement and improved performance of equipment in harsh conditions such as chemical attack, corrosion and erosion.

    Protect your investment

    Imatech Workshops and Site Service Teams are strategically located around Australia with facilities in:

    NSW

    Wollongong Muswellbrook

    QLD

    Rockhampton Townsville

    VIC

    Corio

    WA

    Perth GENERIC ARC

    Using different ceramic sizes and types allows optimum packing density.

  • IMPEllER FANS

    COAl BINS

    FEEd CHUTE lINING

    PRESSURE VESSEl

    PASTE MIxER GRATING / FlOORING

    AlUMINA CERAMIC TIlE lININGS TANk lININGS

    SAFETy FlOORING

    CyClONESACId VAPOUR VESSElS SPlIT CASE PUMP IMPEllER

    STAIR NOSINGS ACId BUNd lINING

    GRATING SySTEMS lAddER RUNGS

    TANkS SPOOlS

    PUMP VOlUTE

    SUMP lINING CHEMICAl BUNdS

    BOIlER ExTRACTION FANS ACId dRAINS

    Imatech Abrasion & Corrosion Imatech Abrasion & Corrosion is a leader in utilising ARC coatings to provide superior performance against erosion, corrosion, abrasion, and chemical attack.

    More than just a product! Experience and understanding of the service conditions allows us to work with our customers to deliver the most economical long term solution, utilising the latest technology lining and coating systems.

    Overview Imatech Abrasion & Corrosion is focused on delivering solutions that meet the needs of today’s high throughput operations.

    Industry faces adverse environmental conditions that attack components and structures, which can result in compromised plant reliability, safety, and lost profits.

    Imatech coatings provide superior performance against erosion, corrosion, abrasion, and chemical attack to both metal and concrete surfaces.

    Providing you with long-term protection to avoid costly structural rebuilds, reduce safety and environmental hazards, simplify maintenance procedures and minimise your downtime, putting more money in your bottom line!

    Project Management & Site Service Our experienced team of specialists provide on-going project management and site services for all types of Abrasion & Corrosion works and comply with the requirements of AS/NZS ISO 9001:2008.

    We supply and install • Corrosion and chemical resistant concrete coatings

    • Trowelable ceramic composites and repair compounds

    • Non-slip step treads and grating systems

    • Sprayable ceramic and composite coating systems

    • High alumina ceramic tiles and chute linings.

    Services include • Workshop based abrasive blasting and industrial coatings

    application

    • Mobile, on-site abrasive blasting and industrial coatings application

    • High Pressure water blasting and concrete remediation work.

    Quality Assurance Abrasion and Corrosion is committed to continuous improvement in all functions of the business.

    Capabilities Statement Imatech Abrasion & Corrosion is committed to meeting and exceeding our customer’s expectations by delivering innovative technology solutions to increase plant reliability and reduce production costs.

    Our experienced network team is involved in the supply, installation and monitoring of surface protection systems for corrosion, chemical attack and abrasion applications across the Asia Pacific region.

    By working closely with our customers to understand their requirements we identify the best material technology with innovative design solutions and employ the highest quality application measures to ensure an optimal service life result.

    Our national network of specialists can offer onsite inspection, survey and analysis of critical equipment performance and offer recommendations to:

    • Increase operational efficiency

    • Extend service life

    • Provide predictable maintenance schedules

    • Reduced life cycle costs over time

    • Maintain asset value

    • Optimize production.

    Imatech Abrasion & Corrosion can deliver these outcomes through our national network of workshop and site services operations which are dedicated to ensuring that all work is carried out to the satisfaction of our customers with the highest level of quality control and with particular attention to ensuring that site safety is considered at all times.

    Imatech operates under a management system certified to AS/NZS/ISO 9001:2015 Quality Management System.

  • Why ARC?

    Head Office:

    Unit 7, 6 Gladstone Road

    Castle Hill , NSW 2154

    Australia

    For further information on how Imatech Abrasion & Corrosion can help you with your next project, please contact our head office or visit imatech.com.au.

    Mail To:

    PO Box 6467

    Baulkham Hills BC, NSW 2153

    Australia

    Contact:

    Australia (Toll Free): 1800 352 228

    International +61 2 8853 3000

    Fax: +61 2 9634 7145

    Email: abrasionandcorrosion@imatech.com.au

    ARC Composites are specifically formulated and engineered to be used in a wide range of harsh environments and conditions.

    • Outstanding adhesion

    • Superior mechanical strength

    • Permeation resistant

    • Outstanding wear resistance

    • 100% solids (no outgassing or shrinkage)

    • Solvent free

    • Chemical resistant

    For the protection, enhancement and improved performance of equipment in harsh conditions such as chemical attack, corrosion and erosion.

    Protect your investment

    Imatech Workshops and Site Service Teams are strategically located around Australia with facilities in:

    NSW

    Wollongong Muswellbrook

    QLD

    Rockhampton Townsville

    VIC

    Corio

    WA

    Perth GENERIC ARC

    Using different ceramic sizes and types allows optimum packing density.

  • IMPEllER FANS

    COAl BINS

    FEEd CHUTE lINING

    PRESSURE VESSEl

    PASTE MIxER GRATING / FlOORING

    AlUMINA CERAMIC TIlE lININGS TANk lININGS

    SAFETy FlOORING

    CyClONESACId VAPOUR VESSElS SPlIT CASE PUMP IMPEllER

    STAIR NOSINGS ACId BUNd lINING

    GRATING SySTEMS lAddER RUNGS

    TANkS SPOOlS

    PUMP VOlUTE

    SUMP lINING CHEMICAl BUNdS

    BOIlER ExTRACTION FANS ACId dRAINS

    Imatech Abrasion & Corrosion Imatech Abrasion & Corrosion is a leader in utilising ARC coatings to provide superior performance against erosion, corrosion, abrasion, and chemical attack.

    More than just a product! Experience and understanding of the service conditions allows us to work with our customers to deliver the most economical long term solution, utilising the latest technology lining and coating systems.

    Overview Imatech Abrasion & Corrosion is focused on delivering solutions that meet the needs of today’s high throughput operations.

    Industry faces adverse environmental conditions that attack components and structures, which can result in compromised plant reliability, safety, and lost profits.

    Imatech coatings provide superior performance against erosion, corrosion, abrasion, and chemical attack to both metal and concrete surfaces.

    Providing you with long-term protection to avoid costly structural rebuilds, reduce safety and environmental hazards, simplify maintenance procedures and minimise your downtime, putting more money in your bottom line!

    Project Management & Site Service Our experienced team of specialists provide on-going project management and site services for all types of Abrasion & Corrosion works and comply with the requirements of AS/NZS ISO 9001:2008.

    We supply and install • Corrosion and chemical resistant concrete coatings

    • Trowelable ceramic composites and repair compounds

    • Non-slip step treads and grating systems

    • Sprayable ceramic and composite coating systems

    • High alumina ceramic tiles and chute linings.

    Services include • Workshop based abrasive blasting and industrial coatings

    application

    • Mobile, on-site abrasive blasting and coating application

    • High Pressure water blasting and concrete remediation work.

    Quality Assurance Abrasion and Corrosion is committed to continuous improvement in all functions of the business.

    Imatech operates under a management system certified to AS/NZS/ISO 9001:2008 quality assurance.

    Capabilities Statement Imatech Abrasion & Corrosion is committed to meeting and exceeding our customer’s expectations by delivering innovative technology solutions to increas