Protech catalog

112
WE CREATE YOUR PASSION WWW.PROTECH.BE

description

Protech products catalog

Transcript of Protech catalog

Page 1: Protech catalog

WE CREATE YOUR PASSION

WWW.PROTECH.BE

01-07cat2009.indd 101-07cat2009.indd 1 20-01-2009 20:47:0220-01-2009 20:47:02

Page 2: Protech catalog

CESSNA 400CESSNA 400RTF EP semi-scale airplane

high power brushless motor

included

2

01-07cat2009.indd 201-07cat2009.indd 2 20-01-2009 20:47:1220-01-2009 20:47:12

Page 3: Protech catalog

12V DC Automatic Li-PoBattery Charger and 230V Power Supply

(included)Professional 4-channel FM radio control

system with servo reverse function, charging socket and socket for fl ightsimulators

High Power Li-Po Batterypack 1200mAh - 11,1V

(included)

5 Channel FM long rangemicro receiver (installed)

3x B160 micro servos(installed & adjusted)

18A Brushless electronic speed controller (installed)

ALL YOU NEED IN ONE PACKAGE!

Item Nr: T0440.35M1 35 MHz MODE 1 T0440.35M2 35 MHz MODE 2 T0440.41M1 41 MHz MODE 1 T0440.41M2 41 MHz MODE 2 T0440.35M1 UK 35 MHz MODE 1 T0440.35M2 UK 35 MHz MODE 2

3

KIT CONTENTSStyrofoam wing, fuselage and tailplane. Preinstalled servos (3), receiver, 18A speed controller and brushless motor. 3 cell LiPo battery and charger. 4 Channel transmitter with trainer socket. All neces-sary hardware and glue. Full colour de cals and clear build ing in struc tions in Eng lish, Dutch, French and German.

REQUIRED FOR OPERATION• 8 x LR-6 size dry cells

TECHNICAL SPECS• Wingspan: 960 mm• Length: 762 mm• Wing area: 15,3 dm2

• Weight: 430 g• Motor: brushless motorFUNCTIONS• Rudder• Elevator• Ailerons• Motor

READY TO FLY ELECTRIC POWERED AIRPLANEEnjoy the fascination of model flying with this beautifully fi nished Cessna. The installed brushless driveset with Lipo is very powerful and allows this little Cessna to reach great heights effortlessly. The fl ying characteristics are mild and very forgiving just like on a high wing trainer so perfect for beginners or scale enthou-siasts who just want to enjoy a quiet and gentle fl ight. All electronics are factory installed and adjusted and the model can be completely fi nished by the time the battery is charged.

01-07cat2009.indd 301-07cat2009.indd 3 20-01-2009 20:47:1720-01-2009 20:47:17

Page 4: Protech catalog

EXTRA 330EXTRA 330RTF EP aerobatic airplane

high power brushless motor

included

4

01-07cat2009.indd 401-07cat2009.indd 4 20-01-2009 20:47:1920-01-2009 20:47:19

Page 5: Protech catalog

12V DC Automatic Li-PoBattery Charger and 230V Power Supply

(included)

Professional 4-channel FM radio control system with servo reverse function,

charging socket and socket for fl ightsimulators

High Power Li-Po Batterypack 1200mAh - 11,1V

(included)

5 Channel FM long rangemicro receiver (installed)

4x B160 micro servos(installed & adjusted)

25A Brushless electronic speed controller (installed)

ALL YOU NEED IN ONE PACKAGE!

Item Nr: T0441.35M1 35 MHz MODE 1 T0441.35M2 35 MHz MODE 2 T0441.41M1 41 MHz MODE 1 T0441.41M2 41 MHz MODE 2 T0441.35M1 UK 35 MHz MODE 1 T0441.35M2 UK 35 MHz MODE 2

5

KIT CONTENTSStyrofoam wing, fuselage and tailplane. Preinstalled servos (4), receiver, 25A speed controller and brushless motor.3 cell LiPo battery and charger. 4 Channel transmitter with trainer socket. All neces-sary hardware and glue. Full colour de cals and clear build ing in struc tions in Eng lish, Dutch, French and German

REQUIRED FOR OPERATION• 8 x LR-6 size dry cells

TECHNICAL SPECS• Wingspan: 940 mm• Length: 755 mm• Wing area: 14,6 dm2

• Weight: 510 g• Motor: brushless motorFUNCTIONS• Rudder• Elevator• Ailerons• Motor

READY TO FLY ELECTRIC POWERED AEROBATIC PLANEThe Extra 330 L is probably one of the most popular aerobatic trainer aircraft. This stunning styrofoam replica is exactly as thrilling to fl y as its fullsize counterpart. Even the most extreme aerobatics are possible thanks to the Extra's light weight and rigid structure. And with the installed brushless motor, the vertical performance is stunning. The Extra 330 L requires mini-mal assembly and can be made ready to fl y in under 1 hour, all necessary tools and hardware are included. The kit comes with a professional 4 channel radio with trainer socket for hobby grade fl ight simulators and a full range 5 channel receiver.

01-07cat2009.indd 501-07cat2009.indd 5 20-01-2009 20:47:2420-01-2009 20:47:24

Page 6: Protech catalog

6

AIRCOMBOAIRCOMBOCessna + Helixx 3D

high power brushless motor

included

TECHNICAL SPECIFICATIONS• Rotor Ø: 345mm• Weight: 230 g

FUNCTIONS• Left - Right• Forward - Backward• Climbing - Descending• Tail control

TECHNICAL SPECIFICATIONS• Wingspan: 960 mm• Length: 762 mm• Wing area: 15,3 dm2

• Weight: 430 g• Motor: brushless motor

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

01-07cat2009.indd Sec1:601-07cat2009.indd Sec1:6 20-01-2009 20:47:2620-01-2009 20:47:26

Page 7: Protech catalog

7

AIRCOMBO

12V DC Li-Po balance charger + 230V Power Supply

(included)

Professional 4-channel FM radio control system with servo reverse function,

charging socket and socket for fl ightsimulators

High Power Li-Po Batterypack 1200mAh - 11,1V

(included)

ALL YOU NEED IN ONE PACKAGE!

Item Nr: T0550.35M1 35 MHz MODE 1 T0550.35M2 35 MHz MODE 2 T0550.41M1 41 MHz MODE 1 T0550.41M2 41 MHz MODE 2 T0550.35M1 UK 35 MHz MODE 1 T0550.35M2 UK 35 MHz MODE 2

KIT CONTENTS• 100% ready to fl y Cessna 400, including 5-channel FM receiver, Brushless motor, Brushless ESC, 4 servos• 100% ready to fl y Helixx 3D, including 5-channel FM receiver, 3in1 gyro and 2 servos• 4-channel FM transmitter with servo reverse function• Automatic "Balance" Li-Po charger• 230V Powersupply• Li-Po batterypack 11,1V 1200mAh• Li-Po batterypack 7,4V 800mAh• USB adapter cable• FMS fl ightsimulator Freeware CD

REQUIRED FOR OPERATION• 8 x LR-6 size dry cells

AIRCOMBO CESSNA + HELIXX 3DDo you want to learn to fl y but can’t decide if you want to start with helicopters or airplanes? With the new AIRCOMBO you no longer have to choose: it has a com-plete airplane and a complete helicopter plus everything you will need to operate them. Transmitter, charger and batteries and even fl ight simulator software with PC interface are all included. This makes the AIRCOMBO the perfect starter kit for the beginning modeler. Even if you are an experienced modeler who wants to enjoy some fuss-free fl ying on a quiet summer evening the AIRCOMBO can be the solu-tion you were looking for.

High Power Li-Po Batterypack 800mAh - 7,4V

(included)

USB adapter cableto connect the transmitter to your PC

(included)

FMS Flightsimulator freewareLearn to fl y airplanes & helicopters

behind your screen(included)

01-07cat2009.indd Sec1:701-07cat2009.indd Sec1:7 20-01-2009 20:47:3120-01-2009 20:47:31

Page 8: Protech catalog

Pre-installed high performance CYCLON brushless motor, spinner and appropriate propeller for excellent performance

Pre-installed high quality programmable "Brushless ESC" with Li-Po battery cut-off safety function

The RTF SOLUTIONS series brings ARF models to the next level... Everything on these models is pre-assembled and pre-installed at the factory. Only little work needs to be done to get airborne. Most of the models can be completed in less then 3 hours. A true BUY & FLY model.The RTF SOLUTIONS models are equipped with a genuine CYCLON brushless motor, high quality servos, brushless speed controller and all are factory installed and adjusted.Just add your radio gear (TX & RX), batterypack and get airborne...

08-39Cat2009(RTF).indd 808-39Cat2009(RTF).indd 8 20-01-2009 20:53:0720-01-2009 20:53:07

Page 9: Protech catalog

Assembled landing gear Factory fi nished wing with pre-installed high quality aileron servos, pre-glued hinges, in-stalled control horns and push-rods

Factory fi nished fuselage with pre-installed high quality rudder & elevator servos, installed and adjusted push-rods

Factory finished elevator panel, pre-glued hinges, installed control horn. The elevator panel is marked with alignment lines for easy installation.

Factory rudder panel, pre-glued hinges, installed control horn and pre-glued hinges

08-39Cat2009(RTF).indd 908-39Cat2009(RTF).indd 9 20-01-2009 20:53:1820-01-2009 20:53:18

Page 10: Protech catalog

10

BEAVERBEAVERSemi-scale EP airplane

08-39Cat2009(RTF).indd 1008-39Cat2009(RTF).indd 10 20-01-2009 20:53:2820-01-2009 20:53:28

Page 11: Protech catalog

11

BEAVERItem Nr: T0431.RTF

READY TO FLY ELECTRIC POWERED SEMI-SCALE AIRCRAFTSemi-scale model of the famous post-ww2 de Havilland workhorse. The DHC-2 Beaver is widely used as a utility aircraft and often fi tted with skis or fl oats. Due to its very high rate of climb the aircraft is also used for skydiving.

TECHNICAL SPECIFICATIONS• Wingspan: 1020 mm• Length: 715 mm• Wing area: 17 dm2

• Weight: 910 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver

Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner

Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells

Pre-installed high quality ball raced micro servos, 2.2 kg torque (3 pcs)

08-39Cat2009(RTF).indd 1108-39Cat2009(RTF).indd 11 20-01-2009 20:53:5520-01-2009 20:53:55

Page 12: Protech catalog

12

EV-97EV-97Semi-scale EP airplane

08-39Cat2009(RTF).indd 1208-39Cat2009(RTF).indd 12 20-01-2009 20:54:0120-01-2009 20:54:01

Page 13: Protech catalog

13

EV-97 EUROSTARItem Nr: T0416.RTF

Ready to fly electRic poweRed semi-scale aiRcRaftEV 97 Eurostar, aka Sportstar, has been manufactured in the Czech Republic and is mostly used as a trainer aircraft in Europe. The wings have been designed with little di-hedral, no taper and no washout other than that which comes from the large upturned wingtips which give the EV 97 its typical look. Protech has carefully reproduced these features in this beautiful scale model of the EV 97.

technical specifications• Wingspan: 960 mm• Length: 770 mm• Wing area: 16,3 dm2

• Weight: 600 g

functions• Rudder• Elevator• Ailerons• Motor

Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner

Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells

Pre-installed high quality ball raced micro servos, 2.2 kg torque (3 pcs)

Rtf solutions Kit contents• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

RequiRed foR opeRation• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver

08-39Cat2009.indd 13 21-01-2009 16:02:13

Page 14: Protech catalog

14

JODEL ROBINSemi-scale EP airplane

08-39Cat2009(RTF).indd 1408-39Cat2009(RTF).indd 14 20-01-2009 20:54:2120-01-2009 20:54:21

Page 15: Protech catalog

15

Item Nr: T0452.RTF

READY TO FLY ELECTRIC POWERED SEMI-SCALE AIRCRAFTThe Robin R2160A is an all metal, low wing, aerobatic monoplane. It is powered by a 160hp Lycoming O320D engine. It is stressed to +6 -3g and has a MTOW of 900kg.PROTECH created a low-weight lovely looking ready-to-fl y semi-scale model of the original that will please many model pilots.

TECHNICAL SPECIFICATIONS• Wingspan: 1015 mm• Length: 810 mm• Wing area: 19,44 dm2

• Weight: 850 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner

Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

08-39Cat2009(RTF).indd 1508-39Cat2009(RTF).indd 15 20-01-2009 20:54:4620-01-2009 20:54:46

Page 16: Protech catalog

16

STAUDACHERSTAUDACHERSemi-scale EP airplane

08-39Cat2009(RTF).indd 1608-39Cat2009(RTF).indd 16 20-01-2009 20:54:5220-01-2009 20:54:52

Page 17: Protech catalog

17

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThis top performing unlimited aerobatic aircraft, built by Mr. Jon Staudacher, is America’s answer to the German Extra and Russian Sukhoi. Since its fi rst fl ight in 1990, it has won several medals and has been fl own in the U.S. Unlimited Team to great success. This attractive model is built up from a complete one-piece upper deck, combined with laser cut wood parts. The Staudacher is highly aerobatic and the fl ight envelope is limitless.

TECHNICAL SPECIFICATIONS• Wingspan: 1080 mm• Length: 930 mm• Wing area: 18,4 dm2

• Weight: 690 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner

Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

STAUDACHERItem Nr: T0418.RTF

08-39Cat2009(RTF).indd 1708-39Cat2009(RTF).indd 17 20-01-2009 20:54:5820-01-2009 20:54:58

Page 18: Protech catalog

18

NINJA JETNINJA JETJet Like EP airplane

08-39Cat2009(RTF).indd 1808-39Cat2009(RTF).indd 18 20-01-2009 20:55:0320-01-2009 20:55:03

Page 19: Protech catalog

19

READY TO FLY ELECTRIC POWERED JET-LIKE AIRPLANEWith the popular Apollo brushless motors it has become possible to develop serious power…The Ninja Jet is engineered to har-ness this power and convert it into plenty of forward motion. The lift surface is suffi cient to make approaches and landings non-criti-cal while the airfoil will guarantee lots of speed. The futuristic looks add to the attrac-tive nature of this purebred speedmonster and make it look like it’s already doing 100 km/h while it’s on the workbench.

TECHNICAL SPECIFICATIONS• Wingspan: 910 mm• Length: 870 mm• Wing area: 16,4 dm2

• Weight: 1030 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 8X6 propeller and spinner

Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver

Pre-installed high quality ball raced micro servos, 2.2 kg torque (3 pcs)

NINJA JETItem Nr: T0419.RTF

08-39Cat2009(RTF).indd 1908-39Cat2009(RTF).indd 19 20-01-2009 20:55:1020-01-2009 20:55:10

Page 20: Protech catalog

20

PITTS S12PITTS S12Semi-scale EP biplane

08-39Cat2009(RTF).indd 2008-39Cat2009(RTF).indd 20 20-01-2009 20:55:1520-01-2009 20:55:15

Page 21: Protech catalog

21

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe Pitts S12 is a highly evolved Pitts Special that boasts a 380 horse power Russian radial engine providing one of the most exhilarating rides available in the world today. Custom designed for extreme aerobatics it is big, bright and noisy deliver-ing a super steroids adventure. With a top speed of 385km/h this beast is not for the faint hearted! This model brings upper class aerobatics to your airfi eld!

TECHNICAL SPECIFICATIONS• Wingspan: 900 mm• Length: 840 mm• Wing area: 17,78 dm2

• Weight: 1080 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 2500 mAh• 4 Ch radio & receiver

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

PITTS S12Item Nr: T0456.RTF

08-39Cat2009(RTF).indd 2108-39Cat2009(RTF).indd 21 20-01-2009 20:55:2020-01-2009 20:55:20

Page 22: Protech catalog

22

BUCKER JUNGMANNBUCKER JUNGMANNSemi-scale EP biplane

08-39Cat2009(RTF).indd 2208-39Cat2009(RTF).indd 22 20-01-2009 20:55:2420-01-2009 20:55:24

Page 23: Protech catalog

23

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe BU-131 Jungmann, was originally a primary trainer for the Luftwaffe. An elegant, light machine, it weighed only 725 kg gross with lots of wing area, so it performed admirably on the 105 hp it was born with. It was such a good little trainer that Czechoslovakia, Switzerland and Spain all built the airplane under license, the Span-ish building them as late as the mid Sixties. The model combines unique design with top aerobatics.

TECHNICAL SPECIFICATIONS• Wingspan: 950 mm• Length: 820 mm• Wing area: 16,2 dm2

• Weight: 990 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

BUCKERJUNGMANN

Item Nr: T0458.RTF

08-39Cat2009(RTF).indd 2308-39Cat2009(RTF).indd 23 20-01-2009 20:55:3020-01-2009 20:55:30

Page 24: Protech catalog

24

CESSNA 182Semi-scale EP airplane

08-39Cat2009(RTF).indd 2408-39Cat2009(RTF).indd 24 20-01-2009 20:55:3420-01-2009 20:55:34

Page 25: Protech catalog

25

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe Cessna 182, marketed under the name Skylane, is a four-seat (with the option of an additional two child seats, installed in the baggage area), high performance, single-engine, light airplane. Introduced in 1956, the 182 has been produced in a number of variants, including a version with retract-able landing gear, and is the second most popular Cessna model, after the 172.

TECHNICAL SPECIFICATIONS• Wingspan: 1120 mm• Length: 850 mm• Wing area: 16,7 dm2

• Weight: 940 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 2500 mAh• 4 Ch radio & receiver

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

CESSNA 182Item Nr: T0457.RTF

08-39Cat2009(RTF).indd 2508-39Cat2009(RTF).indd 25 20-01-2009 20:55:4320-01-2009 20:55:43

Page 26: Protech catalog

26

KATANA S15

26

Precision aerobatic EP airplane

08-39Cat2009(RTF).indd 2608-39Cat2009(RTF).indd 26 20-01-2009 20:55:4720-01-2009 20:55:47

Page 27: Protech catalog

27

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe perfect combination between perfor-mance and good looks! The symmetrical airfoil and extra root area provides excel-lent 3D aerobatic performance. Snapping roll and straight knife edge performance out of the box!

TECHNICAL SPECIFICATIONS• Wingspan: 1000 mm• Length: 1000 mm• Wing area: 23,4 dm2

• Weight: 990 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 2500 mAh• 4 Ch radio & receiver

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

KATANA S15Item Nr: T0455.RTF

Pm

08-39Cat2009(RTF).indd 2708-39Cat2009(RTF).indd 27 20-01-2009 20:56:0320-01-2009 20:56:03

Page 28: Protech catalog

28

ULTIMATEULTIMATEPrecision aerobatic EP biplane

08-39Cat2009(RTF).indd 2808-39Cat2009(RTF).indd 28 20-01-2009 20:56:0920-01-2009 20:56:09

Page 29: Protech catalog

29

ULTIMATEItem Nr: T0427.RTF

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEUltimate fun! The fi rst products of the Ultimate Aircraft Company were designed to improve the looks and performance of the Pitts Special. After they had produced new wings, canopy, fuselages, and wheel pants for the Pitts, it was a natural step to produce their own airplane. Soon, a legend was born.

TECHNICAL SPECIFICATIONS• Wingspan: 900 mm• Length: 965 mm• Wing area: 17,5 dm2

• Weight: 1080 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 2500 mAh• 4 Ch radio & receiver

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

08-39Cat2009(RTF).indd 2908-39Cat2009(RTF).indd 29 20-01-2009 20:56:3320-01-2009 20:56:33

Page 30: Protech catalog

30

TOJEIRO EPTOJEIRO EPF3A style EP airplane

08-39Cat2009(RTF).indd 3008-39Cat2009(RTF).indd 30 20-01-2009 20:56:3820-01-2009 20:56:38

Page 31: Protech catalog

31

TOJEIRO EPItem Nr: T0428.RTF

Also available as KIT: T0428

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe model is built to the highest demands of todays F3A competiton.The fully symmetrical airfoil is modifi ed and improved to suit the extremely dif-fi cult patterns. The fuselage has a large surface to perform better knife-edge ma-noeuvres. The overall aerodynamic shape of the model produces the necessary drag to slow down in vertical downlines. The torsion free wooden fuselage guarantees extreme precision in all fl ying positions.

TECHNICAL SPECIFICATIONS• Wingspan: 1100 mm• Length: 1200 mm• Wing area: 24,7 dm2

• Weight: 1250 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 2500 mAh• 4 Ch radio & receiver

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

08-39Cat2009(RTF).indd 3108-39Cat2009(RTF).indd 31 20-01-2009 20:56:4620-01-2009 20:56:46

Page 32: Protech catalog

32

COLIBRI-ECOLIBRI-EEP powered trainer

08-39Cat2009(RTF).indd 3208-39Cat2009(RTF).indd 32 20-01-2009 20:56:5120-01-2009 20:56:51

Page 33: Protech catalog

33

COLIBRI-EItem Nr: T0424.RTF

READY TO FLY ELECTRIC POWERED TRAINER AIRPLANEThe COLIBRI ARF has a very stable char-acter, fi rst fl ights will go as planned. A well thought out construction gives the Colibri enough strength to withstand the beginners abuse without adding extra weight. Taking off and landing in high grass or on a rough surface won’t pose a single problem thanks to the high, rugged landing gear.

TECHNICAL SPECIFICATIONS• Wingspan: 1400 mm• Length: 1030 mm• Wing area: 30,8 dm2

• Weight: 1420 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 3S1P LiPo 3300 mAh• 4 Ch radio & receiver

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

Pre-installed high quality ball raced std servos, 3.5 kg torque (3 pcs)

08-39Cat2009(RTF).indd 3308-39Cat2009(RTF).indd 33 20-01-2009 20:57:0120-01-2009 20:57:01

Page 34: Protech catalog

34

EXTRA 260Precision aerobatic EP airplane

08-39Cat2009(RTF).indd 3408-39Cat2009(RTF).indd 34 20-01-2009 20:57:0720-01-2009 20:57:07

Page 35: Protech catalog

35

EXTRA 260Item Nr: T0453.RTF

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe Extra 260 is a one-of-a-kind aircraft created by Walter Extra, a German aero-batic competitor and one of the world’s premier aerobatic aircraft designers and builders. This hand-built aircraft is rec-ognized for its beauty, high performance, and maneuverability. The Extra 260 is a successful blend of traditional and high-technology construc-tion.

TECHNICAL SPECIFICATIONS• Wingspan: 1320 mm• Length: 1150 mm• Wing area: 34 dm2

• Weight: 2120g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 4S1P LiPo 3300 mAh• 4 Ch radio & receiver

Pre-installed high performance CYCLON PR 42 motor (KV 880 / 4S) with 13X6 propeller and spinner

Pre-installed "Brushless" ESC 50A with 3.5A switching BEC for 2 - 6 Li-Po cells

Pre-installed high quality ball raced std servos, 3.5 kg torque (4 pcs)

08-39Cat2009(RTF).indd 3508-39Cat2009(RTF).indd 35 20-01-2009 20:57:2520-01-2009 20:57:25

Page 36: Protech catalog

36

KATANA S40KATANA S40Precision aerobatic EP airplane

08-39Cat2009(RTF).indd 3608-39Cat2009(RTF).indd 36 20-01-2009 20:57:3320-01-2009 20:57:33

Page 37: Protech catalog

37

Item Nr: T0454.RTF

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe perfect combination between perfor-mance and good looks! The symmetrical airfoil and extra root area provides excel-lent 3D aerobatic performance. Snapping roll and straight knife edge performance out of the box!

TECHNICAL SPECIFICATIONS• Wingspan: 1350 mm• Length: 1350 mm• Wing area: 42,0 dm2

• Weight: 2140 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 4S1P LiPo 3300 mAh• 4 Ch radio & receiver

Pre-installed high performance CYCLON PR 42 motor (KV 880 / 4S) with 13X6 propeller and spinner

Pre-installed "Brushless" ESC 50A with 3.5A switching BEC for 2 - 6 Li-Po cells

Pre-installed high quality ball raced std servos, 3.5 kg torque (4 pcs)

08-39Cat2009(RTF).indd 3708-39Cat2009(RTF).indd 37 20-01-2009 20:57:4020-01-2009 20:57:40

Page 38: Protech catalog

38

BUCKER JUNGMANNBUCKER JUNGMANNSemi-scale EP biplane

08-39Cat2009(RTF).indd 3808-39Cat2009(RTF).indd 38 20-01-2009 20:57:4620-01-2009 20:57:46

Page 39: Protech catalog

39

BUCKER

Item Nr: T0451.RTF

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe Bucker Jungmann, was originally a primary trainer for the Luftwaffe. An elegant, light machine, it weighed only 725 kg gross with lots of wing area, so it performed admirably on the 105 hp it was born with. It was such a good little trainer that Czechoslovakia, Switzerland and Spain all built the airplane under license, the Span-ish building them as late as the mid Sixties. The model combines unique design with top aerobatics.

TECHNICAL SPECIFICATIONS• Wingspan: 1400 mm• Length: 1200 mm• Wing area: 70,0 dm2

• Weight: 1980 g

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual

REQUIRED FOR OPERATION• Battery 4S1P LiPo 3300 mAh• 4 Ch radio & receiver

Pre-installed high performance CYCLON PR 42 motor (KV 880 / 4S) with 13X6 propeller and spinner

Pre-installed "Brushless" ESC 50A with 3.5A switching BEC for 2 - 6 Li-Po cells

Pre-installed high quality ball raced std servos, 3.5 kg torque (4 pcs)

BUCKER JUNGMANNJUNGMANN

08-39Cat2009(RTF).indd 3908-39Cat2009(RTF).indd 39 20-01-2009 20:57:5320-01-2009 20:57:53

Page 40: Protech catalog

4040

SKYSTAR IISKYSTAR IIIC powered high wing trainer

40-43Cat2009.indd 4040-43Cat2009.indd 40 20-01-2009 21:01:1120-01-2009 21:01:11

Page 41: Protech catalog

41

SKYSTAR IIAlmost reAdy to fly IC powered trAInerThe SkySTar rTF is an all balsa & ply al-most ready to fly trainer. Its lightweight but extremely strong construction makes this model perfect for the novice in r/C modelfly-ing. The wingspan of 1650mm and the large wing area gives this model excellent stability. The model is covered in a very attractive colour scheme for excellent orientation in the sky. The strong tricycle landing gear will withstand the hardest landings.

teChnICAl speCIfICAtIons• Wingspan: 1650 mm• Length: 1260 mm• Wing area: 48 dm2

• Weight: 2500 g• Motor: 2C .40-.46 IC engine 4C .52 IC engine

funCtIons• Rudder• Elevator• Ailerons• Motor

KIt Contentready built all balsa & ply fuselage, wing and panels, all parts are pre-covered in high quality polyester covering film, wheels, fuel tank, pre-bent landing gear, all necessary hardware, clear assembly instructions in English, German, Dutch and French.

requIred for operAtIon• 4-ch radio with 4 std size servos• 2C .40 size IC engine• Glowstart set #T0102.4• 5% plane fuelTHE BEST WAY TO GET STARTED WITH

IC POWERED AIRPLANES

Item Nr: T0352

40-43Cat2009.indd 41 21-01-2009 16:09:18

Page 42: Protech catalog

42

TOJEIRO 50IC powered F3A precision aerobatic airplane

40-43Cat2009.indd 4240-43Cat2009.indd 42 20-01-2009 23:07:5020-01-2009 23:07:50

Page 43: Protech catalog

43

TOJEIRO 50

Required for operation• 4-ch programmable radio• 5x High quality servos (min. 4kg)• Aircraft engine 2C .46 size• Glowstart set #T0102.4• Airplane fuel 20%

Technical specifi cations• Wingspan: 1325 mm• Length: 1400 mm• Wing area: 38,5 dm2

• Weight: 2,2 kg• Engine: 2C .40-.46 size 4C .52 size IC engine

Functions• Rudder• Elevator• Ailerons• Motor

ARTF COMPETITION AEROBATIC F3A AIR CRAFTIf you want the best: TOJEIRO.The TOJEIRO is designed by 3 members of the Belgium F3A World Championship team. The model is built to the highest demands of todays F3A competiton.The fully symmetrical airfoil is modifi ed and improved to suit the extremely dif-fi cult patterns. The fuselage has a large surface to perform better knife-edge ma-noeuvres. The overall aerodynamic shape of the model produces the necessary drag to slow down in vertical downlines. The torsion free wooden fuselage guarantees extreme precision in all fl ying positions.We experienced that the overall weight is extremely important to achieve a top performing model with a constant speed ability.At PROTECH we are convinced that it is possible to produce a wooden F3A model that will outperform all composite construction models on weight, stiffness and precision.

KIT CONTENTReady built balsa and plywood fuselage and tail, balsa sheeted lightweight sty-rofoam wing pan els*, pre-cov ered with Oracover® polyester fi lm. Pre-painted fibreglass mo tor cowl ing, pre-paint ed fi breglass wheel pants, fi breglass landing gear, wheels, fuel tank, en gine mount, ac- ces so ries and clear build ing in struc tions in Eng lish, Ger man, French and Dutch.

FUNCTIONS• Rudder• Elevator• Ailerons• Motor

Item Nr: T0405

40-43Cat2009.indd 4340-43Cat2009.indd 43 20-01-2009 23:09:2720-01-2009 23:09:27

Page 44: Protech catalog

12V DC Automatic Li-PoBattery Charger and 230V Power Supply

Item Nr: T0512.35M1 35 MHz MODE 1 T0512.35M2 35 MHz MODE 2 T0512.41M1 41 MHz MODE 1 T0512.41M2 41 MHz MODE 2 T0512.35M1 UK 35 MHz MODE 1 T0512.35M2 UK 35 MHz MODE 2

HELIXXLONG RANGER

Professional 4-channel FM radio control system with servo reverse function,

charging socket and socket for fl ightsimulators High Power Li-Po Batterypack 800mAh - 7,4V

44

44-57Cat2009.indd 4444-57Cat2009.indd 44 20-01-2009 21:17:0820-01-2009 21:17:08

Page 45: Protech catalog

12V DC Automatic Li-PoBattery Charger and 230V Power Supply

45

HELIXX3DItem Nr:

T0511.35M1 35 MHz MODE 1 T0511.35M2 35 MHz MODE 2 T0511.41M1 41 MHz MODE 1 T0511.41M2 41 MHz MODE 2 T0511.35M1 UK 35 MHz MODE 1 T0511.35M2 UK 35 MHz MODE 2

Professional 4-channel FM radio control system with servo reverse function,

charging socket and socket for fl ightsimulatorsHigh Power

Li-Po Batterypack 800mAh - 7,4V

44-57Cat2009.indd 4544-57Cat2009.indd 45 20-01-2009 21:17:1520-01-2009 21:17:15

Page 46: Protech catalog

46

ZOOM 425 SERIES

FEATURES

• 90% ASSEMBLED AIRFRAME• BRUSHLESS MOTOR (installed)• 30A BRUSHLESS ESC (installed)

T0502.350 (35MHz)T0502.400 (40-41MHz)ELECTRONICS PACK for ZOOM 425. The pack includes: 4x B205 micro servos, NT-410 Heading Lock gyro and a Micro 6 FM receiver

EVO18003S1PLi-Po batterypack 11,1V 3 cells 1800mAh

REQUIRED FOR OPERATION

ZOOM 425 ARF#T0520

• 6 CH TRANSMITTER with CCPM mixing function

PRO.306-35 (35MHz)PRO.306-40 (40-41MHz)6-Channel micro receiver with fail-safe function

FEATURES

• 90% ASSEMBLED AIRFRAME• BRUSHLESS MOTOR (installed)• 30A BRUSHLESS ESC (installed)• 4x HIGH PRECISION DIGITAL SERVOS (installed)• HEADING HOLD GYRO (installed)

EVO18003S1PLi-Po batterypack 11,1V 3 cells 1800mAh

REQUIRED FOR OPERATION

ZOOM 425 RTF#T0520.RTF

• 6 CH TRANSMITTER with CCPM mixing function

44-57Cat2009.indd 4644-57Cat2009.indd 46 20-01-2009 21:17:1820-01-2009 21:17:18

Page 47: Protech catalog

47

ZOOM 450 SERIES

T0502.350 (35MHz)T0502.400 (40-41MHz)ELECTRONICS PACK

T0502.500POWER SET : brush-less motor, 30A ESC, FLIGHTPOWER 2170mAh 11,1V Li-Po batterypack

FEATURES

• 90% ASSEMBLED AIRFRAME

REQUIRED FOR OPERATIONT0502.350 (35MHz)T0502.400 (40-41MHz)ELECTRONICS PACK

EVO25-2170-3SLi-Po batterypack 11,1V 3 cells 2170mAh

FEATURES

• 90% ASSEMBLED AIRFRAME• BRUSHLESS MOTOR (installed)• 40A BRUSHLESS ESC (installed)

REQUIRED FOR OPERATION

FEATURES

• 90% ASSEMBLED AIRFRAME• BRUSHLESS MOTOR (installed)• 40A BRUSHLESS ESC (installed)• 4x DIGITAL SERVOS (installed)• HEADING HOLD GYROREQUIRED FOR OPERATION

EVO25-2170-3SLi-Po batterypack 11,1V 3 cells 2170mAh

T0503.350 (35MHz)T0503.400 (40-41MHz)ELECTRONICS PACK

FEATURES

• 90% ASSEMBLED AIRFRAME• SX-12 HELI ENGINE (included)

REQUIRED FOR OPERATION

FEATURES

• 90% ASSEMBLED AIRFRAME• SX-12 HELI ENGINE (included) • 5x HIGH PRECISION SERVOS (installed)• HEADING HOLD GYRO

ELEC

TRIC

IC P

OW

ERED

PRO.306-35PRO.306-40 6-Channel micro receiver with fail-safe function

PRO.306-35PRO.306-40 6-Channel micro receiver with fail-safe function

REQUIRED FOR OPERATION

ZOOM 450 EP#T0502

ZOOM 450 EP ARF#T0502.ARF

ZOOM 450 EP RTF#T0502.RTF

ZOOM 450 IC#T0503

• • •6 CH TRANSMITTER with CCPM

mixing is required for all ZOOM 450All ZOOM 450 IC models require

starting equipment• • •

ZOOM 450 IC RTF#T0503.RTF

44-57Cat2009.indd 4744-57Cat2009.indd 47 20-01-2009 21:17:2620-01-2009 21:17:26

Page 48: Protech catalog

EP powered 3D helicopter

3D MICRO EP

HELICOPTERS

SET TO

A NEW LEVEL

48

ZOOM 425ZOOM 425

44-57Cat2009.indd 4844-57Cat2009.indd 48 20-01-2009 21:17:4220-01-2009 21:17:42

Page 49: Protech catalog

KIT CONTENTS• 90% assembled airframe• Brushless outrunner motor• Brushless ESC 30A• Wooden main rotor blades• Canopy• Multi-coloured decalsheet• English, Dutch, German and French

instruction manualTECHNICAL SPECIFICATIONS• Rotor Ø: 710 mm• Weight: 650 g• Motor: brushless motor• Batteries: 3 cells Li-Po (11,1V)FUNCTIONS• Pitch axis• Roll• Nick• Tail rotor• Motorspeed

ALMOST READY TO FLY ELECTRIC MICRO HELICOPTERThe Zoom 425 is the (r)evolution of the legendary Zoom 400: It now has al of his strengths and none of its weaknesses. The chassis is stronger because of its G10 structure, the tail system totally reli-able thanks to the belt driven tail and the control system up to date with the 120° CCPM system. The Zoom 425 also fea-tures ball bearings on every moving part, ultra tough landing gear, rear mounted tail servo and brushless motor and speed controller as standard. Time to take this micro helicopter seriously...The ZOOM 425 EP is supplied 90% as-sembled. Brushless motor and ESC in-cluded

REQUIRED FOR OPERATION• 6-Ch computer radio w/ ccpm mix• Electronics pack 35 MHz #T0502.350 • Electronics pack 40-41 MHz #T0502.400• Li-Po batterypack 11,1V 3 cells 1800mAh

• Lightweight G10 chassis• Fully ballraced• 120° CCPM• Belt driven tail• Constant driven tail• Heavy duty center hub• Ball raced see-saw• Alloy motor mount

Item Nr: T0520

T0502.350 (35MHz)T0502.400 (40-41MHz)ELECTRONICS PACK for ZOOM 450. The pack includes: 4x B205 precision high torque micro servos, NT-410 Heading Lock gyro and a high quality full range Micro 6 FM receiver

BRUSHLESS MOTOR + BRUSHLESS MOTOR + 30A ESC INCLUDED

30A ESC INCLUDED

49

ZOOM 425

44-57Cat2009.indd 4944-57Cat2009.indd 49 20-01-2009 21:17:4820-01-2009 21:17:48

Page 50: Protech catalog

EP powered 3D helicopter

Designed to be

a class leading

3D micro machine

50

ZOOM 450 EPZOOM 450 EP

44-57Cat2009.indd 5044-57Cat2009.indd 50 20-01-2009 21:18:0720-01-2009 21:18:07

Page 51: Protech catalog

KIT CONTENTS• 90% assembled airframe• Wooden main rotor blades• Blowmoulded canopy• Multi-coloured decalsheet• English, Dutch, German and French

instruction manualTECHNICAL SPECIFICATIONS• Rotor Ø: 770-810mm• Weight: 750 g• Motor: brushless motor• Batteries: 3 cells Li-Po (11,1V)FUNCTIONS• Pitch axis• Roll• Nick• Tail rotor• Motorspeed

ALMOST READY TO FLY ELECTRIC MICRO HELICOPTERWhen you buy a 3D micro helicopter, you want one that doesn’t need a whole lot of upgrades. You want a 3D micro helicop-ter that performs straight out of the box, even for the most demanding extreme pilots. The ZOOM 450 bundles all the popular features in one lightweight pack-age. The frame is built up from rigid G10 frames and offers ample room for bat-tery and radio components. Tail power is transferred by belt for low maintenance and improved effi ciency. Control inputs from the 120° CCPM control system are translated to the 350mm blades thanks to the standard metal headblock.The ZOOM 450 EP is supplied 90% as-sembled. Electronics and Power Set are not included.

REQUIRED FOR OPERATION• 6-Ch computer radio w/ ccpm mix• Electronics pack 35 MHz #T0502.350 • Electronics pack 40-41 MHz #T0502.400 • Power set #T0502.500

ZOOM 450 EPItem Nr: T0502

T0502.500A special POWER SET is available to provide the ZOOM 450 with ballistic power. The set includes: 350W outrunner brushless motor, 30A ESC and a FLIGHTPOWER 2150mAh 11,1V Li-Po batterypack

T0502.350 (35MHz)T0502.400 (40-41MHz)ELECTRONICS PACK for ZOOM 450. The pack includes: 4x B205 precision high torque micro servos, NT-410 Heading Lock gyro and a high quality full range Micro 6 FM receiver

Designed by D. Franckx

51

• Lightweight G10 chassis• Fully ballraced• 120° CCPM• Belt driven tail

• Constant driven tail• Alloy center hub• Alloy ball raced see-saw• Alloy motor mount

44-57Cat2009.indd 5144-57Cat2009.indd 51 20-01-2009 21:18:1520-01-2009 21:18:15

Page 52: Protech catalog

IC powered 3D helicopter

the first 3D

ic powered

micro helicopter

52

ZOOM 450 ICZOOM 450 IC

44-57Cat2009.indd 5244-57Cat2009.indd 52 20-01-2009 21:18:3420-01-2009 21:18:34

Page 53: Protech catalog

Item Nr: T0503

53

ZOOM 450 IC

KIT CONTENT• 90% assembled airframe• Wooden main rotor blades• Pre-cut blowmoulded canopy• SX-12 engine w/ muffl er• Multi-coloured decalsheet• English, Dutch, German and French

instruction manualTECHNICAL SPECIFICATIONS• Rotor Ø: 770-810 mm• Weight: 900 g• Motor: SX-12 IC engine

ALMOST READY TO FLYIC POWERED MICRO HELICOPTERThis is what you get when you give a micro helicopter a nitro boost: The Zoom 450 IC. It has all the nice features of the Zoom 450 but is equipped with a SX-12 engine which gives you the same nitro rush associated with bigger helicopters. The Zoom 450 IC makes it possible to enjoy the sound and feel of a 3D nitro helicopter in your own backyard.

FUNCTIONS• Pitch axis• Roll• Nick• Tail rotor• Motorspeed

T0503.350 (35MHz)T0503.400 (40-41MHz)ELECTRONICS PACK for ZOOM 450 IC. The pack includes: 5x B205 pre-cision high torque micro servos, NT-410 Heading Lock gyro and a high quality full range Micro 6 FM receiver

• Lightweight G10 chassis• Fully ballraced• 120° CCPM• Belt driven tail• Constant driven tail• Alloy center hub• Alloy ball raced see-saw• SX-12 heli engine

SX-12 heli engineincluded

REQUIRED FOR OPERATION• 6-Ch computer radio w/ ccpm mix• Electronics pack 35 MHz #T0502.350• Electronics pack 40-41 MHz #T0502.400• Protech Daytona 16% nitro fuel• 4,8V RX battery pack• Hex starter shaft #T0184• Starter #T0141

44-57Cat2009.indd 5344-57Cat2009.indd 53 20-01-2009 21:18:4120-01-2009 21:18:41

Page 54: Protech catalog

54

T0502.082Carbon fi bre main rotor blades 350mmFits Zoom 450 EP & IC

T502.205Carbon fi bre lower frame setFits Zoom 450 EP

T0502.083Carbon fi bre tail boomFits Zoom 450 EP & IC

T0502.206Carbon fi bre upper frame setFits Zoom 450 EP

T0520.200Carbon fi bre tail boomFits Zoom 425 EP

T0502.204Carbon fi bre tail fi n setFits Zoom 450 EP & IC

T0502.209Carbon fi bre chassis reinforcementFits Zoom 450 EP

T0520.204Carbon fi bre tail fi n setFits Zoom 425 EP

T0503.205Carbon fi bre lower frame setFits Zoom 450 IC

T0503.206Carbon fi bre upper frame setFits Zoom 450 IC

T0520.205Carbon fi bre lower frame setFits Zoom 425 EP

T0520.206Carbon fi bre upper frame setFits Zoom 425 EP

T0502.210Aluminium CNC machined rotor grip setFits Zoom 425 EP - 450 EP - 450 IC

T0502.211Aluminium CNC machined fl ybar control system. Fits Zoom 450 EP - 450 IC

T0520.201Carbon fi bre main rotor blades 315mmFits Zoom 425 EP

OPTION PARTS

FOR ZOOM 425 & 450

SERIES

T0502.233 Pinion gear 12T, 2 pcsT0502.234 Pinion gear 13T, 2 pcsT0502.235 Pinion gear 14T, 2 pcsT0502.236 Pinion gear 15T, 2 pcsT0502.237 Pinion gear 16T, 2 pcs

T0502.239One piece aluminium motor mount, fi ts Zoom 450 EP

44-57Cat2009.indd 5444-57Cat2009.indd 54 20-01-2009 21:18:4720-01-2009 21:18:47

Page 55: Protech catalog

55

up to .60 size up to .90 size

T0502.212Aluminium CNC machined see-saw setFits Zoom 425 EP - 450 EP - 450 IC

T0502.213Aluminium CNC machined wash-out base set. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.214Aluminium CNC machined wash-out base arm set. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.215Aluminium CNC machined linkage arm set. Fits Zoom 425 EP - 450 IC

T0502.216Aluminium CNC machined swashplate. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.217Aluminium CNC machined tail bearing mount. Fits Zoom 450 IC

T0502.222Aluminium engine washer set, 10pcs.Fits Zoom 450 IC

T0502.227Aluminium CNC machined tail rotor grip set. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.218Aluminium CNC machined tail boom mount set. Fits Zoom 450 IC

T0502.223Aluminium main frame washer set, 20pcs.Fits Zoom 425 EP - 450 EP - 450 IC

T0502.228Alu. CNC mach. 3D main center block 4-O rings. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.219Aluminium CNC machined tail gear case. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.224Aluminium main frame holder 4,5X25, 10pcs. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.229Alu. CNC mach. main shaft bearing block. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.220Aluminium CNC machined tail pitch lever. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.225Aluminium main frame holder 4,5X45, 10pcs. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.221Precision tail pitch yoke setFits Zoom 425 EP - 450 EP - 450 IC

T0502.226Aluminium main frame holder 4,5X8,5, 20pcs. Fits Zoom 425 EP - 450 EP - 450 IC

44-57Cat2009.indd 5544-57Cat2009.indd 55 20-01-2009 21:19:0120-01-2009 21:19:01

Page 56: Protech catalog

RUNNER XBRUNNER XBIC powered racing buggy

1/10 SCALE4WD 3DIFF

BIGGER, STRONGER, FASTER

56

56-65Cat2009.indd 5656-65Cat2009.indd 56 21-01-2009 01:03:0321-01-2009 01:03:03

Page 57: Protech catalog

REQUIRED FOR OPERATION• Daytona fuel 16% nitro 1L #D14161• 12x AA size penlight Ni-Cd cells • Nitro starter set

1/10 SCALE1/10 SCALE4WD 3DIFF4WD 3DIFF

TECHNICAL SPECIFICATIONSLength 430 mmWidth 280 mmHeight 205 mmWheelbase 300 mmWeight 2580 g

SX-

18 P

ULL START ENGINE INCLUDED

PULL E INCLLLLLLLLLLLLLUUUUUUUUUUUUUUUDECCCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLUUUUUUUUUUUUUUUUUUU

FEATURES• 100% Pre-built• PROTECH SX-18 pull start engine • 2-Channel steering wheel radioset• Painted & trimmed body• 20 Sealed ball bearings• Countersunk alu. T6 chassis• CVD universal joints front• 3 Diff. with steel plan e tary gears• Metal spiral bevel gears & pinions• Fibreglass disc brake• 2-Shoe racing clutch• 4 “Big Bore” hydraulic constant

volume shock absorbers• Nylon moulded side guards• Dustproof injection moulded radio-

gear box• Adjustable wing mount• Racing tuned pipe & manifold• High grip off-road tyres (1/8th

style)

RUNNER XB RTRRRRRRRRRTTTTTTTTRRRRRRRR

READY TO RUN 1/10 SCALE IC POWERED RACING BUGGYThis is the 4WD off road buggy you’ve been waiting for! Completely factory as-sembled with a high torque .18 pull start engine and matched tuned exhaust sys-tem you’ll be ready to race in no time! The sturdy aluminium chassis holds preinstalled engine, R/C equipment, ser-vos and awesome suspension system! Packed with features like rear & front anti roll bar for added traction out of corners and high performance long travel "Big Bore" shock absorbers you’ll be edging over the start line early for one of these!

COMBO SET CONTENTS• Car 100% assembled with painted & trimmed body shell• 2-Channel pistol grip radio

Item Nr: Combo set T0870.2

57

56-65Cat2009.indd 5756-65Cat2009.indd 57 21-01-2009 00:56:5321-01-2009 00:56:53

Page 58: Protech catalog

RUNNER MTRUNNER MT

1/10 SCALE4WD 3DIFF

BIGGER

, STRONGE

R, FASTER

IC powered racing buggy

58

56-65Cat2009.indd 5856-65Cat2009.indd 58 21-01-2009 00:57:0321-01-2009 00:57:03

Page 59: Protech catalog

REQUIRED FOR OPERATION• Daytona fuel 16% nitro 1L #D14161• 12x AA size penlight Ni-Cd cells • Nitro starter set

1/10 SCALE1/10 SCALE4WD 3DIFF4WD 3DIFF

TECHNICAL SPECIFICATIONSLength 430 mmWidth 280 mmHeight 205 mmWheelbase 300 mmWeight 2580 g

SX-

18 P

ULL START ENGINE INCLUDED

PULL E INCLLLLLLLLLLLLUUUUUUUUUUUUUUUDECCCCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLUUUUUUUUUUUUUUUUUUUU

FEATURES• 100% Pre-built• PROTECH SX-18 pull start engine • 2-Channel steering wheel radioset• Painted & trimmed body• 20 Sealed ball bearings• Countersunk alu. T6 chassis• CVD universal joints front• 3 Diff. with steel plan e tary gears• Metal spiral bevel gears & pinions• Fibreglass disc brake• 2-Shoe racing clutch• 4 “Big Bore” hydraulic constant

volume shock absorbers• Nylon moulded side guards• Dustproof injection moulded radio-

gear box• Racing tuned pipe & manifold• High grip off-road tyres (1/8th

style)

RUNNER MT RTRRRRRRRRRTTTTTTTTRRRRRRRR

READY TO RUN 1/10 SCALE IC POWERED RACING TRUGGYThis is the 4WD off road truggy based on the RUNNER XB. Completely factory assembled with a high torque .18 pull start engine and matched tuned exhaust system you’ll be ready to race in no time! The sturdy aluminium chassis holds preinstalled engine, R/C equipment, ser-vos and awesome suspension system! Packed with features like rear & front anti roll bar for added traction out of corners and high performance long travel "Big Bore" shock absorbers you’ll be edging over the start line early for one of these!

COMBO SET CONTENTS• Car 100% assembled with painted & trimmed body shell• 2-Channel pistol grip radio

Item Nr: Combo set T0880.2

59

56-65Cat2009.indd 5956-65Cat2009.indd 59 21-01-2009 00:57:0821-01-2009 00:57:08

Page 60: Protech catalog

RADICAL MTRADICAL MT

1/10 SCALE4WD 2SPEED

IC powered monster truck

2-SPEED2-SPEED GEARBOX INCLUDED

GEARBOX INCLUDED

60

56-65Cat2009.indd 6056-65Cat2009.indd 60 21-01-2009 00:57:2021-01-2009 00:57:20

Page 61: Protech catalog

REQUIRED FOR OPERATION• Daytona fuel 16% nitro 1L #D14161• 12x AA size penlight Ni-Cd cells• Nitro starter set

1/10 SCALE1/10 SCALE4WD 2SPEED4WD 2SPEED

TECHNICAL SPECIFICATIONSLength 500 mmWidth 375 mmHeight 190 mmWheelbase 330 mmWeight 3300 g

SX-

18 P

ULL START ENGINE INCLUDED

PULL E INCLLLLLLLLLLLLUUUUUUUUUUUUUUUDECCCCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLUUUUUUUUUUUUUUUUUUUU

FEATURES• 100% Pre-built• PROTECH SX-18 pull start engine • 2-Channel steering wheel radioset• Painted & trimmed body• 20 Sealed ball bearings• Countersunk alu. T6 chassis• CVD universal joints front• 3 Diff. with steel plan e tary gears• Metal spiral bevel gears & pinions• Fibreglass disc brake• 2-Shoe racing clutch• 4 “Big Bore” hydraulic constant

volume shock absorbers• Nylon moulded side guards• Dustproof injection moulded radio-

gear box• Racing tuned pipe & manifold• High grip off-road tyres

RADICAL MT RTRRRRRRRRRTTTTTTTTRRRRRRRR

READY TO RUN 1/10 SCALE IC POWERED MONSTER TRUCKIf you are looking for the ultimate Fun Factor, the RADICAL MT is absolutely right for you. Completely factory as-sembled with a high torque .18 pull start engine and matched tuned exhaust sys-tem.The sturdy aluminium chassis holds preinstalled engine, R/C equipment, ser-vos and awesome suspension system! Packed with features like rear & front anti roll bar for added traction out of corners and high performance long travel "Big Bore" shock absorbers you’ll be edging over the start line early for one of these!

COMBO SET CONTENTS• Car 100% assembled with painted & trimmed body shell• 2-Channel pistol grip radio

Item Nr: Combo set T0890.2

61

56-65Cat2009.indd 6156-65Cat2009.indd 61 21-01-2009 00:57:2521-01-2009 00:57:25

Page 62: Protech catalog

YADA STYADA STIC powered racing buggy

1/8 SCALE4WD

62

WHILE

OUR

COMPE

TITOR

S

ARE

MAKING

TOY

RTR

CAR

S

we Ar

e bu

ilding

RTR

RACIN

G CA

RS!

56-65Cat2009.indd 6256-65Cat2009.indd 62 21-01-2009 00:57:3721-01-2009 00:57:37

Page 63: Protech catalog

REQUIRED FOR OPERATION• Daytona fuel 16% nitro 1L #D14161• 12x AA size penlight Ni-Cd cells• Nitro starter set

1/8 SCALE1/8 SCALE4WD4WD

63

TECHNICAL SPECIFICATIONSLength 485 mmWidth 305 mmHeight 160 mmWheelbase 334-340 mmWeight 3400 g

SX-

21 P

ULL START ENGINE INCLUDED

PULL E INCLLLLLLLLLLLLUUUUUUUUUUUUUUUDDEDCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLUUUUUUUUUUUUUUU

FEATURES• 100% Pre-built• PROTECH SX-21 pull start engine • 2-Channel steering wheel radioset• High torque servos• Painted & trimmed body• 22 Sealed ball bearings• Ball type front suspension• Countersunk alu. T6 chassis• Aluminium T6 radio plate• Aluminium T6 shock stays• CVD universal joints front• 3 Diff. with steel plan e tary gears• Steel spiral bevel gears & pinions• Steel main gear • Double disc brake• 3-Shoe racing clutch• 4 Hydraulic constant volume shock

absorbers• Nylon moulded side guards• Dustproof receiver box• Adjustable wing mount• Racing tuned pipe & manifold• High grip off-road tyres

YADA ST RTRRRRRRRRRTTTTTTTTRRRRRRRR

READY TO RUN 1/8 SCALE IC POWERED RACING BUGGYWhen you buy an RTR nitro buggy, you want one that doesn’t need a whole lot of upgrades. You want a buggy that performs straight out of the box even at competition level. The YADA ST RTR is engineered to handle and built to take it. With the YADA ST RTR you can feel how a top level 1/8 buggy handle, the perfect steering and balanced suspension will amaze you.

COMBO SET CONTENTS• Car 100% assembled with painted & trimmed body shell• 2-Channel pistol grip radio

Item Nr: Combo set T30.2

56-65Cat2009.indd 6356-65Cat2009.indd 63 21-01-2009 00:57:4821-01-2009 00:57:48

Page 64: Protech catalog

YADA TRRYADA TRRIC powered racing truggy

64

56-65Cat2009.indd 6456-65Cat2009.indd 64 21-01-2009 00:57:5321-01-2009 00:57:53

Page 65: Protech catalog

65

REQUIRED FOR OPERATION• Daytona fuel 16% nitro 1L #D14161• 12x AA size penlight Ni-Cd cells• Nitro starter set

FEATURES• 100% Pre-built• PROTECH SX-26 pull start engine • 2-Channel steering wheel radioset• High torque servos• Painted & trimmed body• 22 Sealed ball bearings• Ball type front suspension• Countersunk alu. T6 chassis• Aluminium T6 radio plate• Aluminium T6 shock stays• CVD universal joints front• 3 Diff. with steel plan e tary gears• Steel spiral bevel gears & pinions• Steel main gear • Double disc brake• 3-Shoe racing clutch• 4 Hydraulic constant volume shock

absorbers• Dustproof receiver box• Adjustable wing mount• Racing tuned pipe & manifold• High grip off-road tyres

YADA TRR RTRRRRRRRRRTTTTTTTTRRRRRRRR

READY TO RUN 1/8 SCALE IC POWERED TRUGGYA truggy is a combination of a buggy and a monster truck. It has the handling and agility of a buggy and the smooth long travel suspension of a monster truck. The YADA TRR RTR is fully packed with features you fi nd on much more expen-sive racing truggyies. This Truggy per-forms out of the box without adding all expensive optionals.

Item Nr: Combo set T33.1 (Euro) Combo set T33.1UK (UK)

COMBO SET CONTENTS• Car 100% assembled with painted & trimmed body shell• 2-Channel pistol grip radio

TECHNICAL SPECIFICATIONSLength 550 mmWidth 450 mmHeight 180 mmWheelbase 368-372 mmWeight 3600 g

1/8 SCALE1/8 SCALE4WD4WD

SX-

26 P

ULL START ENGINE INCLUDED

PULL E INCLLLLLLLLLLLLUUUUUUUUUUUUUUUDDDEDCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLUUUUUUUUUUUU

56-65Cat2009.indd 6556-65Cat2009.indd 65 21-01-2009 00:57:5921-01-2009 00:57:59

Page 66: Protech catalog

AVENGER 4

4-CHANNEL FM DIGITAL PROPORTIONAL RADIO CONTROL SYSTEMModern styled 4 channel digital proportional radio control system suitable for all kind of indoor & parkfl y models as well for medium sized electric powered models.The radio features servo reverse function on all 4 channels, a charge socket and fl ightsimulator socket. The transmitter can be used as control system for the fl ight simulator REFLEX XTR, etc...The radio set is supplied with a long range 5 channel micro receiver and 3x B160 7.5g micro servos suitable for most small models.SET CONTENTS• 4 Channel transmitter• 5 Channel Micro receiver (long range)• 3 pcs Micro servos 7,5g B-160• 1 pair of crystals

REQUIRED FOR OPERATION• 8 x LR-6 size cells (TX)

Item Nr: T0221.35M1 35 MHz MODE 1 T0221.35M2 35 MHz MODE 2 T0221.41M1 41 MHz MODE 1 T0221.41M2 41 MHz MODE 2

66

R•

66-83cat2009.indd 6666-83cat2009.indd 66 20-01-2009 21:43:0220-01-2009 21:43:02

Page 67: Protech catalog

USBItem Nr: T0220

USB FLIGHT SIMULATOR CONTROLLERYou want to learn the first steps of flying RC airplanes or helicopters or you want to im-prove your skills? This USB flight simulator controller is the perfect and affordable solu-tion. Just connect the controller to one of the USB ports in your computer and install the supplied freeware FMS flight simulator.

KIT CONTENTS• USB controller• CD-rom with FMS software (Free bonus)

FLIGHT SIMULATORCONTROLLER

NOTICEThe FMS RC Flight Simulator software is supplied free of charge in this package. Updates on the FMS flight simulator can be downloaded from the internet (http://www.flying-model-simulator.com) Protech can not be held responsible for problems or damage caused by the instal-lation and use of this software.

MINIMUM SySTEM REqUIREMENTS FOR FMS RC FLIGHT SIMULATOR• Pentium 3 or AMD 800Mhz• Minimum 128MB RAM• 1GB free hard disk space• CD-Rom drive• DirectX compatible soundcard• 3D acceleration graphic card min. 32MB• Windows 98SE / 2000 / XP operating system with DirectX 7.0 or higher

67

66-83cat2009.indd 67 21-01-2009 01:24:35

Page 68: Protech catalog

68

PRO.303NT-420 micro heading hold gyro

Extreme tail holding power in a micro package! This gyro features transmit-ter/manual switchable heading hold and built-in drift cancel circuit.

Input voltage: 4,8V ~ 6.0VWeight: 5.7 gDimensions: 20x20x10mmGain: heading hold/standard

only 5.7 g

PRO.5-35 5-Ch. micro RX FM - 35 Mhz PRO.5-40 5-Ch. micro RX FM - 40 Mhz

5-Channel narrow band FM micro re-ceiver for indoor & parkfl yers or small models. Single conversion. Compatible with any radio brand. Normal crystals can be fi tted.

Channel: 5 chInput voltage: 3,5V ~ 7,0VWeight: 8 gDimensions: 31x17x9mmRange: full range

only 7g

B206DIGITAL Servo B-206 BB

Micro servo for use in the smallest models, indoor & parkfl yers, small electric powered helicopters.

Input voltage: 4,8V ~ 6,0VWeight: 11 g Dimensions: 20,8x20x12mmTorque: 2,5kg/cm @ 6,0VSpeed: 0,13s/60° @ 6,0V

B207DIGITAL Servo B-207 MG BB

Economy high torque ball raced stand-ard size servo for use in cars, boats and airplanes.

Input voltage: 4,8V ~ 6,0VWeight: 16 g Dimensions: 22,8x24,2x12mmTorque: 3,0 kg/cm @6,0VSpeed: 0,11s/60° @ 6,0V

T0270USB interface cable

USB interface cable connects almost all brands of transmitters to your PC for use with simulator software (not included), or use your transmitter as joystick with your preferred computer games.

Set includes adapters for FUTABA FF series (Square connector), FUTABA & HITEC Din, E-SKY / WALKERA / PROTECH mini Din

66-83cat2009.indd 6866-83cat2009.indd 68 20-01-2009 21:43:1020-01-2009 21:43:10

Page 69: Protech catalog

69

FLIGHTPACKS FLIGHTPACKS

B170-CServopack B170 (3pcs)Value servopack, buy 2 and get 1 free of charge.The B170 servo is perfectly suitable for indoor & parkfl ying models and small gliders. T0226.350 Flightpack 35 MHz

T0226.400 Flightpack 40 MHzT0226.410 Flightpack 41 MHzValue fl ightpack for indoor- & parkfl ying models containing a full range 6 channel micro receiver and 3 pcs of B170 7g micro servos.

T0225.350 Flightpack + Brushless ESC 18A, 35 MHzT0225.400 Flightpack + Brushless ESC 18A, 40 MHzT0225.410 Flightpack + Brushless ESC 18A, 41 MHzValue fl ightpack for indoor- & parkfl ying models containing a full range 6 channel micro receiver, 3 pcs of B170 7g micro servos and a Apollo brushless ESC 18A (2-3 Li-Po cells).

TECHNICAL SPECIFICATIONS B170 SERVOInput voltage: 4,8V ~ 6,0VWeight: 7 g Dimensions: 24x11x24 mmTorque: 1,4 kgSpeed: 0,12s/60°

TECHNICAL SPECIFICATIONS APOLLO ESC 18ANi-xx cells: 6-10 cellsLi-xx cells: 2-3 cellsCont. Amp: 18APeak Amp: 23ABEC: 5V 3A

66-83cat2009.indd 6966-83cat2009.indd 69 20-01-2009 21:43:2020-01-2009 21:43:20

Page 70: Protech catalog

7070

PRO.E18 Apollo brushless ESC 18A

Input voltage: 5V ~ 12VNumber of cells: 6-10Number of Li-Po cells: 2Brake: YesSoft start: YesContinuous current: 18APeak current: 23ABEC: 5V 3AWeight (incl. wires): 21 gDimensions: 47x22x7mm

PRO.E25 Apollo brushless ESC 25A

Input voltage: 5V ~ 12VNumber of cells: 6-10Number of Li-Po cells: 2-3Brake: YesSoft start: YesContinuous current: 25APeak current: 35ABEC: 5V 3AWeight (incl. wires): 23gDimensions: 47x22x7mm

PRO.E30 Apollo brushless ESC 30A Input voltage: 5V ~ 12VNumber of cells: 6-10Number of Li-Po cells: 2-3Brake: YesSoft start: YesContinuous current: 30APeak current: 40ABEC: 5V 3AWeight (incl. wires): 23gDimensions: 47x22x7mm

PRO.E40 Apollo brushless ESC 40A Input voltage: 5V ~ 12VNumber of cells: 6-10Number of Li-Po cells: 2-3Brake: YesSoft start: YesContinuous current: 40APeak current: 50ABEC: 5V 3AWeight (incl. wires): 23gDimensions: 47x22x7mm

PRO.E45 Apollo brushless ESC 45A

Input voltage: 6V ~ 22VNumber of cells: 6-16Number of Li-Po cells: 2-6Brake: YesSoft start: YesContinuous current: 45APeak current: 55ABEC: OPTOWeight (incl. wires): 30gDimensions: 70x22x7mm

PRO.E60 Apollo brushless ESC 60A

Input voltage: 6V ~ 22VNumber of cells: 6-16Number of Li-Po cells: 2-6Brake: YesSoft start: YesContinuous current: 60APeak current: 70ABEC: OPTOWeight (incl. wires): 33gDimensions: 70x22x7mm

PRO.E70 Apollo brushless ESC 70A

Input voltage: 6V ~ 22VNumber of cells: 6-16Number of Li-Po cells: 2-6Brake: YesSoft start: YesContinuous current: 70APeak current: 80ABEC: OPTOWeight (incl. wires): 33gDimensions: 70x22x7mm

Because of the great diversity in brushless motors on the market today, choosing a matching speed control-ler can be very diffi cult sometimes. That is why PROTECH has produced a series of multi-functional speed controllers that can be matched to virtually any existing brushless motor without elaborate setting up making them “plug and play”.

The APOLLO series come with 2 timing modes (2-5/18 degrees) and 1 frequency mode (8 kHz).

PRO.E-CARD Programming card Apollo ESC

Easy to use programming card to set-up your Apollo Brushless ESC without connecting the ESC to your receiver.

Select your preferred settings with the jumper connectors and connect the card to the ESC. All programming is automatically set.

66-83cat2009.indd 7066-83cat2009.indd 70 20-01-2009 21:43:2220-01-2009 21:43:22

Page 71: Protech catalog

7171

T0186Fail Safe unit

The PROTECH Fail-Safe unit is plugged in between your receiver and throttle servo. If the receiver detects an interferred signal, no signal or if the receiver battery voltage is low, the throttle servo will move to a preset position.

Dimensions: 35x14x8mmWeight: approx. 8gOperating voltage: 4,8~6,0 VFor AM and FM (PPM) use only

T0181Voltspy II

Ultra thin & lightweight on-board battery monitor for 4,8V and 6V RX-batterypacks.

Weight: 4 gDimension: 40x18x3mm

T0160Battery checker 4,8V & 6V

This handy unit measures the voltage of your RX batteries using a 400mA load. The readout is from a row of 10 LED’s. Switch selectable for 4 or 5 cell battery packs.

T0162Expanded scale voltmeter

An analog meter to measure the voltage of RX & TX batteries under a 300mA load. Supplied with plug in leads and probes.

T0219RX regulator for 2 lipo cells

Use your 2-cell Li-XX battery to pow-er your receiver and servos. 5 or 6V switchable output.

Dimensions: 20x30x7mmWeight: approx. 9gOutput current: 3AOutput voltage: 5~6,0 V

PRO.E35H Apollo brushless ESC40A Input voltage: 5V ~ 12VNumber of Li-Po cells: 2-3Brake: YesSoft start: NoContinuous current: 35APeak current: 40ABEC: 5V 3ATiming: AutoWeight (incl. wires): 30gDimensions: 47x22x7mm

PRO.E29-H Apollo brushless ESC 30A Input voltage: 5V ~ 12VNumber of Li-Po cells: 2-3Brake: ProgrammableSoft start: NoContinuous current: 30APeak current: 35ABEC: 5V 3ATimming: AutoWeight (incl. wires): 23gDimensions: 40x26x7mm

66-83cat2009.indd 7166-83cat2009.indd 71 20-01-2009 21:43:2720-01-2009 21:43:27

Page 72: Protech catalog

7272

BECBEC

BECBECBEC

FUTABAJR / HITECMPXFUTABAJR / HITEC

MPX

FUTABAJR / HITECMPX

FUTABA

JR / HITECMPX

FUTABA

JR / HITECMPX

FUTABA

JR / HITECMPX

FUTABA

JR / HITECMPX

FUTABA

JR / HITECMPX

FUTABA

JR / HITECMPX

PL010 Servo lead JR/HITEC, male

PL013.10 Extension lead 10cm JR/HITEC

PL011 Servo lead JR/HITEC, female

PL020 Servo lead FUTABA, male

PL021 Servo lead FUTABA, female

PL023.10 Extension lead 10cm FUTABA

PL013.50 Extension lead 50cm JR/HITEC

PL023.25 Extension lead 25cm FUTABA

PL013.100 Extension lead 100cm JR/HITEC

PL013.25 Extension lead 25cm JR/HITEC

PL023.50 Extension lead 50cm FUTABA

PL023.100 Extension lead 100cm FUTABA

PL030 BEC lead, male

PL031 BEC lead, female

PL033 Extension lead BEC

PL014 Y-lead JR/HITEC

PL024 Y-lead FUTABA

PL045 Switch universal FUTABA/JR/HITEC

PL035 Switch harness BEC

PL056 Charge lead Glowstart

PL016 Charge lead TX JR

PL057 Charging cable Dean connector

PL026 Charge lead TX FUTABA/HITEC

PL059 Charging cable universal RX + BEC

PL037 Charge lead BEC

PL058 Charging cable multi functional

PL017 Charge lead RX JR/HITEC

PL027 Charge lead RX FUTABA

PL052 Charge lead universal

PL053 Charge lead sealed lead acid batteries

JR / HITECFUTABA

66-83cat2009.indd 7266-83cat2009.indd 72 20-01-2009 21:43:3520-01-2009 21:43:35

Page 73: Protech catalog

7373

PL051 Charge lead TAMIYA

PL147 MPX connector MALE

PL148 MPX connector FEMALE

PL061 TX-battery lead JR

PL062 TX-battery lead FUTABA

PL055 Conversion lead TAMIYA - Mini Tamiya

PVC PVC PVC PVCPL074 Flexible PVC wire 1,0mm, 2x1m

SILICON SILICONPL080 Silicon wire 0,75mm, 2x1m

PL081 Silicon wire 1,5mm, 2x1m

PL071 Flexible PVC wire 0,25mm, 2x1m

PVC PVCPL075 Flexible PVC wire 1,5mm, 2x1m

PL076 Flexible PVC wire 2,5mm, 2x1m

PL073 Flexible PVC wire 0,75mm, 2x1m

PL072 Flexible PVC wire 0,50mm, 2x1m

SILICONSILICONSILICONSILICONPL083 Silicon wire 2,5mm, 2x1m

PL084 Silicon wire 2,5mm, 2x1m

PL082 Silicon wire 1,5mm, 2x1m

PL085 Silicon wire 4,0mm, 2x1m

SILICON

SILICONSILICON

SILICON

SILICONPL151 Tamiya female conn. w/ sil. wire 2,5mm

PL115 Tamiya Y lead. w/ sil. wire 2,5mm

PL150 Tamiya male conn. w/ sil. wire 2,5mm

PL054 Charge lead Tamiya special

SILICONSILICONPL152 AMP male conn. w/ sil. wire 2,5mm

PL153 AMP female conn. w/ sil. wire 2,5mm

PL265 BEC connectors, 1pair

PL266 BEC connector MALE, 5pcsPL268 BEC connector MALE, 25pcs

PL267 BEC connector FEMALE, 5pcsPL269 BEC connector FEMALE, 25pcs

PL255 DEANS connector FEMALE + Sil. wire2,5mm

PL256 DEANS connector MALE + Sil. wire2,5mm

SILICONSILICON

66-83cat2009.indd 7366-83cat2009.indd 73 20-01-2009 21:44:0920-01-2009 21:44:09

Page 74: Protech catalog

7474

PL121 G2 gold connectors, 2pair

PL122 G2 gold connectors, 5pair

PL123 G2 gold connectors, 50pair

PL131 G3.5 gold connectors, 2pair

PL132 G3.5 gold connectors, 5pair

PL125 G4 gold connectors, 2pair

PL126 G4 gold connectors, 5pair

PL127 G4 gold connectors, 50pair

PL230 G2 gold connectors, 2pcs

PL231 G2 gold connectors, 5pcs

G2 G2 G3.5G2G2

G4 G2 G2G4G4

PL133 G3,5 gold connectors, 50pair

G3.5

PL141 High power connector male, 2pcs

PL146 High power connector female, 25pcs

PL250 DEANS connector 1 pair

PL135 Battery Bars Gold Plated, 10pcs

PL251 DEANS connector MALE, 5pcsPL253 DEANS connector MALE, 25pcs

PL252 DEANS connector FEMALE, 5pcsPL254 DEANS connector FEMALE, 25pcs

PL260 Micro connector, setPL261 Micro connector, 5pcsPL262 Micro connector, 50pcs

PL140 High power connector, 1pair

PL143 High power connector male, 5pcs

PL145 High power connector male, 25pcs

PL144 High power connector female, 5pcs

PL142 High power connector female, 2pcs

PL235 G3,5 gold connectors, 2pcs

PL236 G3,5 gold connectors, 5pcs

PL237 G3,5 gold connectors, 25pcs

PL240 G4 gold connectors, 2pcs

PL241 G4 gold connectors, 5pcs

G3.5 G4 G4G3.5G3.5

G3.5

PL242 G4 gold connectors, 25pcs

G4

PL232 G2 gold connectors, 25pcs

G2

66-83cat2009.indd 74 21-01-2009 16:07:01

Page 75: Protech catalog

7575

PL160 TAMIYA motor connectors, 2sets

PL162 TAMIYA motor connectors, 50sets

PL161 TAMIYA motor connectors, 5sets

PL164 TAMIYA motor conn. + sil. wire, 1pair

PL171 Crocodile clips for bananaplugs, 1pair

PL172 Crocodile clips standard, 1pair

PL173 Banana plugs 4mm, 1pair

PL170 Car battery clips, 1pair

PL163 TAMIYA motor conn. + sil. wire, 1pair

PL100 MINI TAMIYA connector, 1pair

PL102 MINI TAMIYA connector female, 5pcs

PL101 MINI TAMIYA connector male, 5pcs

PL111 TAMIYA connector male, 5pcs

PL112 TAMIYA connector female, 5pcs

PL113 TAMIYA connector male, 50pcs

PL104 MINI TAMIYA connector female, 25pcs

PL114 TAMIYA connector female, 50pcs

PL110 TAMIYA connector, 1pair

PL103 MINI TAMIYA connector male, 25pcs

PL116 AMP connector, 1pair

PL117 AMP connector male, 5pcs

PL118 AMP connector female, 5pcs

PL119 AMP connector male, 50pcs

PL120 AMP connector female, 50pcs

66-83cat2009.indd 7566-83cat2009.indd 75 20-01-2009 21:45:0820-01-2009 21:45:08

Page 76: Protech catalog

7676

PL183 Heat shrink tubing 6mm, 2x25cm

PL184 Heat shrink tubing 9mm, 2x25cm

PL190 Heat shrink 46mm, 1m, orange

PL180 Heat shrink tubing 2mm, 2x25cm

PL181 Heat shrink tubing 3mm, 2x25cm

PL182 Heat shrink tubing 4mm, 2x25cm

PL191 Heat shrink 50mm, 1m, transp.

PL192 Heat shrink 70mm, 1m, red

PL193 Heat shrink 70mm, 1m, blue

PL195 Heat shrink 70mm, 1m, transp.

PL194 Heat shrink 91mm, 1m, transp

66-83cat2009.indd 7666-83cat2009.indd 76 20-01-2009 21:45:3420-01-2009 21:45:34

Page 77: Protech catalog

7777

66-83cat2009.indd 7766-83cat2009.indd 77 20-01-2009 21:45:4420-01-2009 21:45:44

Page 78: Protech catalog

• AC 220/230V input voltage

• 6-8 cells transmitter battery charge output. Charge current: 150mA

• Reverse polarity TX charging jack to suit every brand of radiosystem on the market.

• 4-5 cells receiver battery charge output. Charge current: 150mA

This 220/230V mains charg er is especially de signed to charge your transmitter and receiver bat ter ies over night. The charge current on both outputs is 150 mA.

RX -TX

Item Nr: T0242 Euro version T0242.UK UK version

CHARGER

78

SUITABLE FORSUITABLE FOR

ALL BRANDSALL BRANDS

66-83cat2009.indd 7866-83cat2009.indd 78 20-01-2009 21:45:4620-01-2009 21:45:46

Page 79: Protech catalog

• AC 220/230V input voltage

• 6-8 cells transmitter battery charge output. Charge current: 150mA

• Reverse polarity TX charging jack to suit every brand of radiosystem on the market.

• 4-5 cells receiver battery charge output. Charge current: 150mA

• BEC connector (RX output)

• 1,2V Glowstart battery charge output. Charge current: 200mA

• 7,2V Powerpack charge output. Charge current: 200mA

This multifunctional 220/230V mains adaptercharg er is especially de signed to charge 3 devices. You can charge your transmitter, receiver, glowstarter and 7,2V powerpack with the same charger.

MULTI

Item Nr: T0256 Euro version T0256.UK UK version

CHARGER 4

79

CHARGE UP TOCHARGE UP TO

4 DEVICES4 DEVICES

66-83cat2009.indd 7966-83cat2009.indd 79 20-01-2009 21:45:5120-01-2009 21:45:51

Page 80: Protech catalog

MULTI 6

• AC 220/230V input voltage

• For Ni-Cd, Ni-MH and Lead Acid batteries

• All six outputs can be used simultaneously

• LED display for each output

• Charge current output 50 - 60 - 80 - 140 - 180 - 500mA • Safety transformer

• Reverse polarity protection

• Fused AC input

The Multi Charger 6 is designed to charge Ni-Cd, Ni-MH and Lead acid batteries. You can se lect out of 6 out put ranges from 50 to 500 mA.

Item Nr: T0241 Euro version T0241.UK UK version

80

ALL 6 OUTPUTS CAN BE ALL 6 OUTPUTS CAN BE

USED SIMULTANEOUSLYUSED SIMULTANEOUSLY

66-83cat2009.indd 8066-83cat2009.indd 80 20-01-2009 21:45:5420-01-2009 21:45:54

Page 81: Protech catalog

• AC 220/230V & DC 12V input voltage

• For Ni-Cd & Ni-MH batteries

• Delta peak cut-off system (fast charge)

• Auto trickle charge

• Charging output RX & TX

• Outputs: Fast charge 6 - 8 cells 3000mA 7,2 - 9,6V

RX: 4 - 5 cells 150mA 4,8 - 6V

TX: 6-8 cells 150mA 7,2 - 9,6V

• Safety transformer

• Reverse polarity protection

• Fused AC input / DC output

The Mega Peak 3000 is the ideal Ni-Cd & Ni-MH battery charger for cars and elec tric glider pilots. The fast charg er is fully au to mat ic using a delta-peak cut off sys tem. With the RX and TX charg ing output you can charge your re ceiv er and trans mit ter bat ter ies.

MEGA PEAK

Item Nr: T0230 Euro version T0230.UK UK version

3000

81

UP TO 3A UP TO 3A

CHARGE CURRENTCHARGE CURRENT

66-83cat2009.indd 8166-83cat2009.indd 81 20-01-2009 21:46:0120-01-2009 21:46:01

Page 82: Protech catalog

• AC 220/230V & DC 12V input voltage

• For Ni-Cd & Ni-MH batteries

• Delta peak cut-off system (fast charge)

• Auto trickle charge

• LCD display

• Temperature sensor

• Outputs: Fast charge 4 - 8 cells (7,2 - 9,6V) AC: 0,1 to 4,5A DC: 0,1 to 5,5A RX: 4 - 5 cells 150mA 4,8 - 6V TX: 6-8 cells 150mA 7,2 - 9,6V

• Discharge function

• Reverse polarity protection

• Power switching supply

• Fused AC input / DC output

The Mega Peak 4500 charger is the ideal Ni-Cd & Ni-MH battery charger for car and electric glider pilots. The high power fast charger is fully automatic us-ing a delta-peak cut off system. The LCD display gives you accurate information about the selected charge current. The charger features a discharge function. With the RX and TX charge output you can charge your receiver and transmitter batteries simultaneously.

MEGA PEAK

Item Nr: T0258 Euro version T0258.UK UK version

4500

Magnetic temperature sensor prevents overcharging from Ni-MH batteries

82

UP TO 5,5A UP TO 5,5A

CHARGE CURRENTCHARGE CURRENT

66-83cat2009.indd 8266-83cat2009.indd 82 20-01-2009 21:46:0420-01-2009 21:46:04

Page 83: Protech catalog

8383

66-83cat2009.indd 8366-83cat2009.indd 83 20-01-2009 23:36:0720-01-2009 23:36:07

Page 84: Protech catalog

84

CNC-machined aluminium radial mount system* available

Large cooling slots for optimal heat transfer.

Adapts easily to existing fi rewall.*

Multiple fi xation possibilities.*

(*) radial mount system optional

84-91cat2009.indd 8484-91cat2009.indd 84 20-01-2009 21:48:3020-01-2009 21:48:30

Page 85: Protech catalog

Ref. nr. VoltageRange

NbLi-Po

RPM/V Dimensions(mm)

Weight(g)

Shaft diameter(mm)

Max. load current

(A/60sec.)

Max. power(W/60sec.)

Max. thrust (kg)

Propeller

MC28-2225 7,2-11,1V 2-3 1460 Ø28x22 26g Ø 3,2mm 8A 85W 0,32kg 8x4,3MC28-2227 6-7,4V 2 1380 Ø28x22 26g Ø 3,2mm 7A 55W 0,38kg 8x4,3MC28-2609 6-7,4V 2 1850 Ø28x26 41g Ø 3,2mm 16A 115W 0,85kg 9x4,7MC28-2612 7,4 - 11,1V 2-3 1410 Ø28x26 41g Ø 3,2mm 14A 155W 0,65kg 8x6MC28-2614 7,4 - 11,1V 2-3 1260 Ø28x26 41g Ø 3,2mm 12A 130W 0,60kg 9x6MC28-3009 7,4 - 11,1V 2-3 1280 Ø28x30 54g Ø 3,2mm 18A 200W 0,85kg 8x6MC28-3012 7,4 - 11,1V 2-3 910 Ø28x30 54g Ø 3,2mm 14A 155W 0,80kg 9x6MC35-3010 7,4 - 11,1V 2-3 1350 Ø35x30 75g Ø 4mm 25A 275W 1,20kg 10x6MC35-3605 7,4 - 11,1V 2-3 1430 Ø35x36 105g Ø 4mm 42A 465W 1,30kg 10x6MC35-3606 7,4 - 11,1V 2-3 1200 Ø35x36 105g Ø 4mm 38A 420W 1,20kg 10x6MC42-4010 7,2-14,8V 2-4 950 Ø42x40 130g Ø 5mm 34A 500W 1,80kg 11x5,5MC42-5007 11,1-18,5V 3-5 700 Ø42x50 195g Ø 5mm 43A 795W 2,10kg 12x8MC42-6005 11,1-18,5V 3-5 700 Ø42x60 260g Ø 5mm 46A 850W 2,50kg 12x8MC50-5506 11,1-18,5V 3-5 730 Ø50x55 290g Ø 6mm 58A 1070W 3,50kg 12x6,5MC50-5508 14,8-18,5V 4-5 550 Ø50x55 290g Ø 6mm 55A 1020W 3,10kg 15x8MC50-6507 14,8-22,2V 4-6 420 Ø50x65 387g Ø 6mm 60A 1330W 4,20kg 16x8MC50-6509 14,8-25,9V 4-7 325 Ø50x65 387g Ø 6mm 50A 1295W 4,60kg 17x8

85

MC28-2225

Max Power:85WKV:

1460 rpm/vWeight:

26 g

MC28-2227

Max Power:55 WKV:

1380 rpm/vWeight:

26 g

MC28-2609

Max Power:115 W

KV: 1850 rpm/v

Weight:41 g

MC28-2612

Max Power:155 W

KV: 1410 rpm/v

Weight:41 g

MC28-2614

Max Power:130 W

KV: 1260 rpm/v

Weight:41 g

MC28-3009

Max Power:200 W

KV: 1280 rpm/v

Weight:54 g

MC28-3012

Max Power:155 W

KV: 910 rpm/vWeight:

54 g

MC35-3010

Max Power:275 W

KV: 1350 rpm/v

Weight:75 g

MC35-3605

Max Power:465 W

KV: 1430 rpm/v

Weight:105 g

MC35-3606

Max Power:420 W

KV: 1200 rpm/v

Weight:105 g

MC42-4010

Max Power:500 W

KV: 950 rpm/vWeight:130 g

MC42-5007

Max Power:795 W

KV: 700 rpm/vWeight:195 g

MC42-6005

Max Power:850 W

KV: 700 rpm/vWeight:260 g

MC50-5506

Max Power:1070 W

KV: 730 rpm/vWeight:290 g

MC50-5508

Max Power:1020 W

KV: 550 rpm/vWeight:290 g

MC50-6507

Max Power:1330 W

KV: 420 rpm/vWeight:387 g

MC50-6509

Max Power:1295 W

KV: 325 rpm/vWeight:387 g

RADIAL MOUNT SYSTEMFor 28 series: MC28-100For 35 series: MC35-100For 42 series: MC42-100For 50 series: MC50-100

84-91cat2009.indd 8584-91cat2009.indd 85 20-01-2009 21:48:3620-01-2009 21:48:36

Page 86: Protech catalog

86

Ref. nr. Description (1 pc)PH8060 Hyperdrive propeller 8x6PH9075 Hyperdrive propeller 9x7,5PH1080 Hyperdrive propeller 10x8

Ref. nr. Description (1 pc)PI2508 Indoor prop direct drive 2,5x0.8PI2510 Indoor prop direct drive 2,5x1PI3020 Indoor prop direct drive 3x2PI3030 Indoor prop direct drive 3x3PI4025 Indoor prop direct drive 4x2,5PI4040 Indoor prop direct drive 4x4PI4530 Indoor prop direct drive 4,5x3PI4540 Indoor prop direct drive 4,5x4PI5030 Indoor prop direct drive 5x3PI5043 Indoor prop direct drive 5x4.3PI6030 Indoor prop direct drive 6x3PI7035 Indoor prop direct drive 7x3,5PI8040 Indoor prop direct drive 8x4PI9050 Indoor prop direct drive 9x5PI1060 Indoor prop direct drive 10x6PI1170 Indoor prop direct drive 11x7PI1280 Indoor prop direct drive 12x8

Ref. nr. Description (1 pc)PS6050 Slow fl y propeller for geared motors 6x5PS7060 Slow fl y propeller for geared motors 7x6PS8043 Slow fl y propeller for geared motors 8x4,3PS8060 Slow fl y propeller for geared motors 8x6PS9047 Slow fl y propeller for geared motors 9x4,7PS9070 Slow fl y propeller for geared motors 9x7PS1047 Slow fl y propeller for geared motors 10x4,7PS1080 Slow fl y propeller for geared motors 10x8PS1147 Slow fl y propeller for geared motors 11x4,7PS1180 Slow fl y propeller for geared motors 11x8PS1260 Slow fl y propeller for geared motors 12x6PS1280 Slow fl y propeller for geared motors 12x8PS1365 Slow fl y propeller for geared motors 13x6,5PS1390 Slow fl y propeller for geared motors 13x9PS1470 Slow fl y propeller for geared motors 14x7PS1410 Slow fl y propeller for geared motors 14x10PS1575 Slow fl y propeller for geared motors 15x7,5PS1510 Slow fl y propeller for geared motors 15x10

A range of propellers designed for small and slowfl y electric powered models. The shape of the extra thin blades is developed to guarantee optimum perform-ance and low power consumption. The propellers are made from glass reinforced nylon for extra strength and can be used up to 7000 rpm/min.

MA940Motor mount set MEGAX 300

MA941Motor mount set MEGAX 400

MA942Motor mount set MEGAX 500-600

PS9070-3BLSlowfl y 3-bladed propeller for geared motors 9x7

PS1080-4BLSlowfl y 4-bladed propeller for geared motors 10x8

84-91cat2009.indd 8684-91cat2009.indd 86 20-01-2009 21:48:4620-01-2009 21:48:46

Page 87: Protech catalog

87

MA800Collet prop adapter for 2mm shaft M5, 1pc

MA801Collet prop adapter for 2,3mm shaft M5, 1pc

MA802Collet prop adapter for 3mm shaft M5, 1pc

MA803Collet prop adapter for 3,2mm shaft M5, 1pc

MA804Collet prop adapter for 4mm shaft M6, 1pc

MA805Collet prop adapter for 5mm shaft M6, 1pc

MA806Collet prop adapter for 5mm shaft M8, 1pc

MA807Collet prop adapter for 6mm shaft M8, 1pc

MA814Screw type adapter for 4mm shaft M8, 1pc

MA815Screw type adapter for 5mm shaft M8, 1pc

MA816Screw type adapter for 5mm shaft M10, 1pc

MA817Screw type adapter for 6mm shaft M10, 1pc

MA812Screw type adapter for 2,3mm shaft M8, 1pc

MA811Screw type adapter for 3,2mm shaft M6, 1pc

MA813Screw type adapter for 3,2mm shaft M8, 1pc

MA810Screw type adapter for 2,3mm shaft M6, 1pc

Ref. nr. DescriptionMA810 Screw type propeller adapter for 2,3mm shaft M6, 1pcMA812 Screw type propeller adapter for 2,3mm shaft M8, 1pcMA811 Screw type propeller adapter for 3,2mm shaft M6, 1pcMA813 Screw type propeller adapter for 3,2mm shaft M8, 1pcMA814 Screw type propeller adapter for 4,0mm shaft M8, 1pcMA815 Screw type propeller adapter for 5,0mm shaft M8, 1pcMA816 Screw type propeller adapter for 5,0mm shaft M10, 1pcMA817 Screw type propeller adapter for 6,0mm shaft M10, 1pc

Ref. nr. Description Spare colletMA840 Precision aluminium spinner Ø30mm for 2,3mm shaft, 1pc MA840.1MA841 Precision aluminium spinner Ø30mm for 3,0mm shaft, 1pc MA841.1MA842 Precision aluminium spinner Ø30mm for 3,2mm shaft, 1pc MA842.1MA843 Precision aluminium spinner Ø40mm for 3,0mm shaft, 1pc MA843.1MA844 Precision aluminium spinner Ø40mm for 3,2mm shaft, 1pc MA844.1MA845 Precision aluminium spinner Ø40mm for 4,0mm shaft, 1pc MA845.1MA846 Precision aluminium spinner Ø40mm for 5,0mm shaft, 1pc MA846.1

Spare collets see list below

Fits GRAUPNER* blades

Ref. nr. Description Slot width PinØ Spare collet Spare pins (2x)MA820 Precision spinner compl. Ø30mm for 2,3mm shaft 5mm 2mm MA820.1 MA820.2MA821 Precision spinner compl. Ø30mm for 3,0mm shaft 5mm 2mm MA821.1 MA820.2MA822 Precision spinner compl. Ø30mm for 3,2mm shaft 5mm 2mm MA822.1 MA820.2MA823 Precision spinner compl. Ø40mm for 3,0mm shaft 6mm 2mm MA823.1 MA823.2MA824 Precision spinner compl. Ø40mm for 3,2mm shaft 6mm 2mm MA824.1 MA823.2MA825 Precision spinner compl. Ø40mm for 4,0mm shaft 6mm 2mm MA825.1 MA823.2MA826 Precision spinner compl. Ø40mm for 5,0mm shaft 6mm 2mm MA826.1 MA823.2MA827 Precision spinner compl. Ø40mm for 3,0mm shaft 8mm 3mm MA823.1 MA827.2MA828 Precision spinner compl. Ø40mm for 3,2mm shaft 8mm 3mm MA824.1 MA827.2MA829 Precision spinner compl. Ø40mm for 4,0mm shaft 8mm 3mm MA825.1 MA827.2MA830 Precision spinner compl. Ø40mm for 5,0mm shaft 8mm 3mm MA826.1 MA827.2

Spare collets see list below

Spare pins seelist below

Slot width

Ref. nr. Description Spare colletMA800 Collet propeller adapter for 2,0mm shaft M5, 1pc MA800.1MA801 Collet propeller adapter for 2,3mm shaft M5, 1pc MA801.1MA802 Collet propeller adapter for 3,0mm shaft M5, 1pc MA802.1MA803 Collet propeller adapter for 3,2mm shaft M5, 1pc MA803.1MA804 Collet propeller adapter for 4,0mm shaft M6, 1pc MA804.1MA805 Collet propeller adapter for 5,0mm shaft M6, 1pc MA805.1MA806 Collet propeller adapter for 5,0mm shaft M8, 1pc MA806.1MA807 Collet propeller adapter for 6,0mm shaft M8, 1pc MA807.1

Precision spinnerPrecision spinner

84-91cat2009.indd 8784-91cat2009.indd 87 20-01-2009 21:49:1720-01-2009 21:49:17

Page 88: Protech catalog

88

M1040SX-12 engine w/ pull start

Performance pull start engines

M1041SX-12 ‘factory tuned’ engine w/ pull start

Performance pull start engines

M1020 slide carb. M1021 rotary carb.SX-15 ‘factory tuned’ engine w/ pull start

Performance pull start engines

M1042SX-21 3P ‘factory tuned’ engine w/ pull start

Performance pull start engines

M1043.0209mm slide carburatorFits M1042, M1043, M1044

M1044SX-21 8P OMEGA engine w/ boost chamber

These engines are specially produced by a world leading manufacturer according to our high specifications. This results in well finished, reliable & powerful engines.

M1046SX-46 ABC BB airplane engine

•2ballbearings•ABCliner-piston•1,62Hp•2.000-17.000rpm•1/4-28UNF crankshaftthread

Ref. nr. Description HP RPM Carb.Ø CrankshaftM1020 SX-15 ‘factory tuned’ engine w/ pull start 1,2 3.000-33.000 5,5mm slide std M5M1040 SX-12 engine w/ pull start 1,05 3.000-30.000 5,5mm slide std M5M1041 SX-12 ‘factory tuned’ engine w/ pull start 1,1 3.000-32.000 5,5mm slide std M5M1042 SX-21 3P ‘factory tuned’ engine w/ pull start 1,9 3.000-35.000 7mm slide std1/4-28UNFM1043 SX-21 8P OMEGA w/ pull start 2,3 3.000-40.000 7mm slide std1/4-28UNFM1044 SX-21 8P OMEGA engine w/ boost chamber 2,4 3.000-40.000 7mm slide std1/4-28UNFM1045 SX-26 3P ‘factory tuned’ engine w/ pull start 2,1 3.000-35.000 7mm slide std1/4-28UNF

M1043SX-21 8P OMEGA engine w/ pull start

Performance pull start engines

M1045SX-26 engine w/ pull start

Performance pull start engines

2cm3 2cm3 2,5cm3 3,5cm3 3,5cm3

Performance engines

3,5cm3 4,2cm3

ø9mm

Performance airplane engine

6,5cm3

AIRPLANE ENGINE

84-91cat2009.indd 88 21-01-2009 16:04:50

Page 89: Protech catalog

89

T0620.104Tuned pipe set for 1/10 touring cars. Fits NITRO FUN 4WD, NITRO SHAFT, MSX-3, KYOSHO ALPHA, AVIO RACING

1/10 CAR pipes

T0620.105Manifold 1/10 scale. Fits NITRO FUN 4WD, NITRO SHAFT, MSX-3, KYOSHO ALPHA, AVIO RACING

1/10 CAR manifold

T60.080Manifold 1/10 scale. Fits NITRO TECH 12, NITRO FUN 2WD, HPI RS4, KYOSHO SPI-DER, CEN TS-4, XT-4

1/10 CAR manifold

T0660.226Tuned pipe set for 1/10 touring cars. Fits NITRO TECH 12, NITRO FUN 2WD, HPI RS4, KYOSHO SPIDER, CEN TS-4, XT-4

1/10 CAR pipes

T53.041Manifold for 1/8 scale off-road cars.

1/8 CAR manifold

T0600.048 1/10 scaleStandard foam airfi lter, set

T0600.072 1/10 scaleReplacement foam for T0600.048

T0660.100 1/10 scaleCompetition on-road foam air fi lter, set

T51.051 1/8 scaleStandard off-road foam airfi lter w/ silicon connector 45°

T01.036.1 1/10 scaleOff-road foam airfi lter, set

T01.036.2 Foam fi lter element, 1pc

T53.0431/8 scale manifold spring

1/8 CAR

84-91cat2009.indd 8984-91cat2009.indd 89 20-01-2009 21:49:5320-01-2009 21:49:53

Page 90: Protech catalog

90

T0141.1Starter rubber airplane

A453Starter disc car 100mm

A451Starter disc car 120mm

M006Starter box car

Finally a uni ver sal start er box that you don’t have to as sem ble. The start er box can be used for both 1/8 and 1/10 scale on-and off-road ve hi cles. Just add your choice of two 6-cell bat tery packs or one 12V sealed lead acid bat tery. The start er box gives strong start with plen ty of torque for even the most fi n icky of en gines.

Automatic glowdriver with glowshot charger in clud ed

T0183Electric geared engine starter 12V for engines up to 1.20 size. The starter is supplied with 2 aluminium cones. The small cone accepts spinners up to 70mm and the big cone up to 120mm.

HANDY, LIGHT &EXTREMELY POWERFUL

T0163Digital tacho meter

Precision propeller RPM measuring tool with LCD screen.Suitable for 2 and 3 bladed props. Measure up to 40.000 RPM.

84-91cat2009.indd 9084-91cat2009.indd 90 20-01-2009 21:50:0320-01-2009 21:50:03

Page 91: Protech catalog

91

5.5mm7mm8mm

10mm

8mm9mm

10mm12mm

T0102.2Glow start with meter

The ideal glow start for the active competition pilot. This blue anodised aluminium bodied glow start tests the condition of your glow plug during starts. If the meter needle indicates green, then the glow plug is in perfect condi-tion. If the meter needle indicates red, the glow plug is broken or not operating correctly.

T0119Remote glow unit

The ideal system for completely covered or dif-fi cult to access engines. This remote glow unit is supplied with 2 different glow plug adapters to fi t most glow plugs on the market.

T0117Peg glow clip

A lot of airplane modellers still prefer the peg type clip. PROTECH offers a high quality ver-sion with brass contact point.

T0101Glow clip standard

The PROTECH glow clips all feature a rugged metal construction, custom designed internal plug grip with a spring and sliding center contact, to give a perfect connection in all conditions.

T0101.2Glow clip extra long

The PROTECH glow clips all feature a rug-ged metal construction, custom designed internal plug grip with a spring and sliding center contact, to give a perfect connection in all conditions. The extra long version is especially for cowled engines, car engines and helicopters.

T0102.5Glow start with Ni-Cd battery

The glow start combines a locking glow clip together with a removable high capacity 1,2V rechargeable Ni-Cd battery.

T0161Cross wrench 4-way w/ glow plug holder

An internal clip holds the glow plug tight for easy installation and removal. The cross wrench is chrome plated for extra durability.

T0156Cross wrench 4-way XL w/ glow plug holder

An internal clip holds the glow plug tight for easy installation and removal. This cross wrench is chrome plated for extra durability.

T0102.4Glow start with charger

The glow start combines a locking glow clip together with a removable high capacity 1,2V re-chargeable Ni-Cd battery. The set contents: high quality glow socket with blue anodised aluminium battery holder, 1,2V Ni-Cd battery and a 5 hours mains (230V AC) charger.

T0102.4UKGlow start with charger UK

T0102.8Glow start with charger

The glow start combines a locking glow clip together with a high capacity 1,2V rechargeable Ni-Cd battery. The set contents: high quality glow socket with a 1,2V 1300mAh Ni-Cd battery and a 4 hours mains (230V AC) charger.

T0102.8UKGlow start with charger UK

E0415Fuel bottle 500ml

E0417 Fuel bottle 250ml

84-91cat2009.indd 9184-91cat2009.indd 91 20-01-2009 21:50:1920-01-2009 21:50:19

Page 92: Protech catalog

92

Ref. nr. Description Synthetic oil %

Castor oil %

Nitro%

D14101 Daytona fuel CAR 10% 1L 10% 2% 10%D14102 Daytona fuel CAR 10% 2,5L 10% 2% 10%D14161 Daytona fuel CAR 16% 1L 10% 2% 16%D14162 Daytona fuel CAR 16% 2,5L 10% 2% 16%D14251 Daytona fuel CAR 25% 1L 10% 2% 25%D14252 Daytona fuel CAR 25% 2,5L 10% 2% 25%

D16099After run oil 50ml, 1pc

Special after run oil to protect your engine from moisture and humidity impacts. Use this special after run oil before you want to store your engine for a longer period of time. Just remove your glowplug, put some drops of after run oil in your engine and turn the crankshaft around slowly. Your engine is fully protected.

D14161Daytona fuel CAR 16%1L

D14162Daytona fuel CAR 16%2,5L

D14251Daytona fuel CAR 25%1L

D14252Daytona fuel CAR 25%2,5L

D14101Daytona fuel CAR 10%1L

D14102Daytona fuel CAR 10%2,5L

This DAYTONA range of high quality fuels is produced by the world champion fuel manufacturer Jonker. All fuels are mixed with a special oil composed of 3 different synthetic oils and castor oil. Designed by a chemical engineer especially for model engine use.

92-103cat2009.indd 9292-103cat2009.indd 92 20-01-2009 21:53:3720-01-2009 21:53:37

Page 93: Protech catalog

93

R10001ROSSI glow plug P1, HOT, 1pc

R10002ROSSI glow plug P2, HOT, 1pc

R10003ROSSI glow plug P3, MEDIUM, 1pc

R10004ROSSI glow plug P4, COLD, 1pc

R10005ROSSI glow plug P5, EXTRA COLD, 1pc

R10006ROSSI glow plug P6, COLD, 1pc

R10007ROSSI glow plug P7, COLD, 1pc

R10008ROSSI glow plug P8, EXTRA COLD, 1pc

Rossi glowplugs, the perfect choice for performance. This range of glowplugs is manu-factured by a world leading Italian manufacturer. The number indicates the thick-ness of the heating wire. The highest number is the coldest plug available.

PA009Fuel filter standard SMALL, 2pc

PA011Fuel filter standard LARGE, 1pc

PA012Profi fuel fi lter SMALL, 1pc

PA013Profi fuel fi lter LARGE, 1pc

PA014Profi fuel fi lter EXTRA LARGE, 1pc

MA512One way valve, 1 pc

PA020Fueling valve SMALL, metha-nol, 1pc

PA021Fueling valve LARGE, metha-nol, 1pc

PA022Fueling valve LARGE, gasoline, 1pc

PA023Fueling tip SMALL for PA020, 1pc

PA024Fueling tip LARGE for PA021 & PA022, 1pc

MA173Metal pressure nipple M3, 1pc

MA174Metal pressure nipple M4, 1pc

MA305Metal pressure nipple M5, 1pc

PA010Metal pressure nipple M4, 90°, 1pc

PA003Filling nozzle w/ fi lter, 1pc

PA015Clutch w/ fi lter, 1pc

PA001Fuel stopper & mount, 2pcs

PA002Fuel line stopper, 4pcs

PA017Profi fuel fi lter LARGE w/ sin-tered bronze fi lter element, 1pc

T0147Hand crank fuel pump, 1pc

High quality hand crank fuel pump to fi ll or drain the fuel tank of your model. The hand crank fuel pump can be used for all types of methanol based fuels.

T0148Electric fuel pump 12V, 1pc

High quality electric fuel pump to fi ll or drain the fuel tank of your model. The pump can be used for all types of methanol based fuels. Can be used as stand alone unit or built-in in a fi eld box.

92-103cat2009.indd 9392-103cat2009.indd 93 20-01-2009 21:53:4420-01-2009 21:53:44

Page 94: Protech catalog

94

Ref. nr. Description Interior Ø

Exterior Ø

Wallthickness

Length in package

MA600 Silicon tube blue-line 2,0mm 3,5mm 0,75mm 1mMA600.25 Silicon tube blue-line 2,0mm 3,5mm 0,75mm 25mMA601 Silicon tube blue-line 2,0mm 5,0mm 1,50mm 1mMA601.25 Silicon tube blue-line 2,0mm 5,0mm 1,50mm 25mMA601.50 Silicon tube blue-line 2,0mm 5,0mm 1,50mm 50mMA602 Silicon tube blue-line 2,0mm 6,0mm 2,00mm 1mMA602.25 Silicon tube blue-line 2,0mm 6,0mm 2,00mm 25mMA603 Silicon tube blue-line 2.5mm 6,0mm 1,75mm 1mMA603.25 Silicon tube blue-line 2.5mm 6,0mm 1,75mm 25mMA610 Silicon tube blue-line 10,0mm 14.0mm 2,00mm 1mMA610.25 Silicon tube blue-line 10,0mm 14.0mm 2,00mm 25m

J20101Silicon tube YELLOW 2x5mm, 1mJ20101.25Silicon tube YELLOW 2x5mm, 25m

J20102Silicon tube RED 2x5mm, 1mJ20102.25Silicon tube RED 2x5mm, 25m

J20103Silicon tube GREEN 2x5mm, 1mJ20103.25Silicon tube GREEN 2x5mm, 25m

MA630Fuel tube TYGON 4041 3x6mm, 1mMA630.2Fuel tube TYGON 4041 3x6mm, 2m

MA631Fuel tube NEOPRENE 3x6mm, 1mMA631.2Fuel tube NEOPRENE 3x6mm, 2m

MA611.010Sil icon exhaust tube blue-l ine 11x15mm, 10cmMA611.025Sil icon exhaust tube blue-l ine 11x15mm, 25cmMA611.050Sil icon exhaust tube blue-l ine 11x15mm, 50cm

MA612.010Sil icon exhaust tube blue-l ine 15x21mm, 10cmMA612.025Sil icon exhaust tube blue-l ine 15x21mm, 25cmMA612.050Sil icon exhaust tube blue-l ine 15x21mm, 50cm

MA613.010Sil icon exhaust tube blue-l ine 19x25mm, 10cmMA613.025Sil icon exhaust tube blue-l ine 19x25mm, 25cmMA613.050Sil icon exhaust tube blue-l ine 19x25mm, 50cm

MA176Plastic tube coupler elbow, 1pc

MA177Plastic tube coupler straight, 1pc

MA178Plastic tube coupler ‘T-piece’, 1pc

MA300Silicon exhaust defl ector 45°, 10mm, 1pc

MA302Silicon exhaust defl ector 45°, 8mm, 1pc

MA303Silicon exhaust defl ector 45°, 6mm, 1pc

92-103cat2009.indd 9492-103cat2009.indd 94 20-01-2009 21:54:1420-01-2009 21:54:14

Page 95: Protech catalog

95

MA166Fuel tank 284ml62x48x120mm

MA167Fuel tank 340ml67x47x129mm

MA168Fuel tank 400ml68x58x128mm

MA186Fuel tank 450ml74x62x128mm

MA162Fuel tank 55ml35x29x68mm

MA163Fuel tank 110ml48x38x89mm

MA164Fuel tank 170ml51x42x97mm

MA165Fuel tank 227ml56x47x102mm

PA030Fuel tank hardware STANDARD, 1set

PA031Fuel tank hardware LARGE, 1set

MA440 Fuel tank hardware METHANOLMA441 Fuel tank hardware GASOLINE

MA433Fuel tank 600ml80x66x152mm

MA434Fuel tank 1000ml80x95x165mm

MA187Fuel tank 570ml77x62x141mm

MA427Fuel tank 100ml49x39x90mm

MA428Fuel tank 150ml50x47x94mm

MA429Fuel tank 250ml54x54x108mm

MA430Fuel tank 300ml60x54x112mm

MA431Fuel tank 400ml65x52x137mm

MA432Fuel tank 500ml69x65x154mm

92-103cat2009.indd 9592-103cat2009.indd 95 20-01-2009 21:54:3320-01-2009 21:54:33

Page 96: Protech catalog

96

Ref. nr. Description (1pc)AP06030 APC propeller 6x3AP06040 APC propeller 6x4AP07030 APC propeller 7x3AP07040 APC propeller 7x4AP07050 APC propeller 7x5AP07060 APC propeller 7x6AP07060-P APC propeller 7x6 pusher

AP07070 APC propeller 7x7AP07080 APC propeller 7x8AP08040 APC propeller 8x4AP08050 APC propeller 8x5AP08060 APC propeller 8x6AP08070 APC propeller 8x7AP08080 APC propeller 8x8AP09040 APC propeller 9x4AP09050 APC propeller 9x5AP09060 APC propeller 9x6AP09060-P APC propeller 9x6 pusher

AP09070 APC propeller 9x7AP09080 APC propeller 9x8AP09560 APC propeller 9,5x6AP10030 APC propeller 10x3AP10040 APC propeller 10x4AP10050 APC propeller 10x5AP10060 APC propeller 10x6AP10060-P APC propeller 10x6 pusher

Ref. nr. Description (1pc)AP10070 APC propeller 10x7AP10070-P APC propeller 10x7 pusher

AP10080 APC propeller 10x8AP10545 APC propeller 10,5x4,5AP10560 APC propeller 10,5x6AP11030 APC propeller 11x3AP11040 APC propeller 11x4AP11050 APC propeller 11x5AP11060 APC propeller 11x6AP11060-P APC propeller 11x6 pusher

AP11070 APC propeller 11x7AP11070-P APC propeller 11x7 pusher

AP11080 APC propeller 11x8AP11090 APC propeller 11x9AP11010 APC propeller 11x10AP11540 APC propeller 11,5x4AP11560 APC propeller 11,5x6AP12040 APC propeller 12x4AP12050 APC propeller 12x5AP12060 APC propeller 12x6AP12070 APC propeller 12x7AP12080 APC propeller 12x8AP12090 APC propeller 12x9AP12010 APC propeller 12x10AP12338 APC propeller 12,25x3,75AP12560 APC propeller 12,5x6

Ref. nr. Description (1pc)AP13040 APC propeller 13x4AP13060 APC propeller 13x6AP13070 APC propeller 13x7AP13080 APC propeller 13x8AP13090 APC propeller 13x9AP13590 APC propeller 13,5x9AP14050 APC propeller 14x5AP14060 APC propeller 14x6AP14060-P APC propeller 14x60-PAP14070 APC propeller 14x7AP14080 APC propeller 14x8AP14010 APC propeller 14x10AP15060 APC propeller 15x6AP15080 APC propeller 15x8AP15010 APC propeller 15x10AP16060 APC propeller 16x6AP16080 APC propeller 16x8AP16010 APC propeller 16x10AP17060 APC propeller 17x6AP17080 APC propeller 17x8AP17012 APC propeller 17x12AP18080 APC propeller 18x8AP18010 APC propeller 18x10AP18012 APC propeller 18x12AP20080 APC propeller 20x8AP20010 APC propeller 20x10AP20012 APC propeller 20x12AP20014 APC propeller 20x14AP21010 APC propeller 21x10AP22010 APC propeller 22x10AP22014 APC propeller 22x14AP24014 APC propeller 24x14AP26014 APC propeller 26x14

APC THIN ELECTRIC SERIESAP06055E APC THIN EP prop 6x5,5AP07050E APC THIN EP prop 7x5AP08040E APC THIN EP prop 8x4AP08060E APC THIN EP prop 8x6AP08060EP APC THIN EP 8x6 pusherAP08080E APC THIN EP prop 8x8AP09045E APC THIN EP prop 9x4,5AP09060E APC THIN EP prop 9x6AP09075E APC THIN EP prop 9x7,5AP09090E APC THIN EP prop 9x9

MA511Rubber fi nger guard

Protects your fi nger while starting your aircraft engine.

T0163Digital tacho meterPrecision propeller RPM measuring tool with LCD screen.Suitable for 2 and 3 bladed props. Measure up to 40.000 RPM.

Ref. nr. Description (1pc)AP10050E APC THIN EP prop 10x5AP10070E APC THIN EP prop 10x7AP10010E APC THIN EP prop 10x10AP11055E APC THIN EP prop 11x5,5AP11070E APC THIN EP prop 11x7AP11080E APC THIN EP prop 11x8AP11085E APC THIN EP prop 11x8,5AP11010E APC THIN EP prop 11x10AP12060E APC THIN EP prop 12x6AP12080E APC THIN EP prop 12x8AP12010E APC THIN EP prop 12x10AP12012E APC THIN EP prop 12x12AP13040E APC THIN EP prop 13x4AP13065E APC THIN EP prop 13x6,5AP13080E APC THIN EP prop 13x8AP13010E APC THIN EP prop 13x10AP14070E APC THIN EP prop 14x7AP14085E APC THIN EP prop 14x8,5AP14010E APC THIN EP prop 14x10AP14012E APC THIN EP prop 14x12AP15040E APC THIN EP prop 15x4AP15060E APC THIN EP prop 15x6AP15080E APC THIN EP prop 15x8AP15010E APC THIN EP prop 15x10AP16080E APC THIN EP prop 16x8AP16010E APC THIN EP prop 16x10AP16012E APC THIN EP prop 16x12AP17080E APC THIN EP prop 17x8AP17010E APC THIN EP prop 17x10AP17012E APC THIN EP prop 17x12AP18080E APC THIN EP prop 18x8AP18010E APC THIN EP prop 18x10AP18012E APC THIN EP prop 18x12AP19010E APC THIN EP prop 19x10AP19012E APC THIN EP prop 19x12AP20080E APC THIN EP prop 20x8AP20010E APC THIN EP prop 20x10AP20011E APC THIN EP prop 20x11AP20013E APC THIN EP prop 20x13AP20015E APC THIN EP prop 20x15AP20514E APC THIN EP prop 20,5x14

92-103cat2009.indd 9692-103cat2009.indd 96 20-01-2009 21:54:5220-01-2009 21:54:52

Page 97: Protech catalog

97

A series of high precision glass reinforced nylon spinners with aluminium CNC-machined backplate. These spinners are perfectly bal-anced to avoid any vibration to your model or engine.

2-Blade DescriptionMA550.38 Alu spinner Ø38mmMA550.44 Alu spinner Ø44mmMA550.51 Alu spinner Ø51mmMA550.57 Alu spinner Ø57mmMA550.63 Alu spinner Ø63mmMA550.70 Alu spinner Ø70mmMA550.76 Alu spinner Ø76mmMA550.82 Alu spinner Ø82mmMA550.89 Alu spinner Ø89mmMA550.95 Alu spinner Ø95mmMA550.102 Alu spinner Ø102mmMA550.114 Alu spinner Ø114mmMA550.127 Alu spinner Ø127mmMA550.140 Alu spinner Ø140mmMA550.152 Alu spinner Ø152mmMA550.165 Alu spinner Ø165mm

D1

D2

Ref. nr. Description D1 D2MA552.14 Spinner adapter M5x0,8 M4MA552.24 Spinner adapter U7/32-32 M4MA552.34 Spinner adapter 1/4-28UNF M4MA552.44 Spinner adapter 5/16-24UNF M4MA552.45 Spinner adapter 5/16-24UNF M5MA552.46 Spinner adapter 5/16-24UNF M6MA552.54 Spinner adapter 3/8-24UNF M4MA552.55 Spinner adapter 3/8-24UNF M5MA552.56 Spinner adapter 3/8-24UNF M6MA552.64 Spinner adapter M8x1 M4MA552.74 Spinner adapter M8x1,25 M4MA552.75 Spinner adapter M8x1,25 M5MA552.76 Spinner adapter M8x1,25 M6MA552.84 Spinner adapter M10x1,25 M4MA552.85 Spinner adapter M10x1,25 M5MA552.86 Spinner adapter M10x1,25 M6MA552.94 Spinner adapter M7x1 M4MA552.95 Spinner adapter M7x1 M5MA553.14 Spinner adapter M6x1 M4

Ref. nr. Description Size

MA850 Alu. propellernut M5

MA851 Alu. propellernut M6

MA852 Alu. propellernut M7x1

MA853 Alu. propellernut M8x1

MA854 Alu. propellernut M8x1.25

MA855 Alu. propellernut M10x1

MA856 Alu. propellernut 1/4x28UNF

MA857 Alu. propellernut 5/16x24UNF

MA858 Alu. propellernut 3/8x24UNF

2-Blade DescriptionMA123/. Nylon spinner Ø38mmMA124/. Nylon spinner Ø44mmMA125/. Nylon spinner Ø50mmMA126/. Nylon spinner Ø57mmMA127/. Nylon spinner Ø63mmMA128/. Nylon spinner Ø69mmMA129/. Nylon spinner Ø89mm

Available in different colours:

W=white, B=blue,

G=yellow, R=red, Z=black

Ref. nr. Description SizeMA865 Cone prop. nut M5MA866 Cone prop. nut M6

2-Blade DescriptionMA560/. Profi spinner Ø45mmMA561/. Profi spinner Ø51mmMA562/. Profi spinner Ø57mmMA563/. Profi spinner Ø63mmMA565/. Profi spinner Ø75mm

Ref. nr. DescriptionAK102 Prop & spinner reamer

The ideal tool to enlarge the hole in your propeller or spinner perfectly centered. The reamer is divided in 5 sections: 4,5mm - 6,2mm - 7mm - 8mm - 9,5mm. The reamer is made from fi rst-class HSS steel.

Alu.

spi

nner

s fo

r 2-b

lade

d pr

ops

rang

ing

from

38m

m to

165

mm

.

Alu.

spi

nner

s fo

r 3-b

lade

d pr

ops

rang

ing

from

38m

m to

165

mm

.

Balance your props and spinner before using them on this friction free balancer. The mandrel will hold all sizes props and spinners. A well balanced prop unit will save your engine bearings and protect your model from vibrations.

3-Blade DescriptionMA551.38 Alu spinner Ø38mmMA551.44 Alu spinner Ø44mmMA551.51 Alu spinner Ø51mmMA551.57 Alu spinner Ø57mmMA551.63 Alu spinner Ø63mmMA551.70 Alu spinner Ø70mmMA551.76 Alu spinner Ø76mmMA551.82 Alu spinner Ø82mmMA551.89 Alu spinner Ø89mmMA551.95 Alu spinner Ø95mmMA551.102 Alu spinner Ø102mmMA551.114 Alu spinner Ø114mmMA551.127 Alu spinner Ø127mmMA551.140 Alu spinner Ø140mmMA551.152 Alu spinner Ø152mmMA551.165 Alu spinner Ø165mm

Ref. nr. DescriptionMA510 Prop balancer

Available in different colours:W=white, G=yellow, R=red, Z=black

Tough, high impact spinners for right-hand rotation 2-bladed pro-pellers.

A complete line of aluminium spinners ranging from 38mm to 165mm. All spinners are supplied with matching backplate and spinner adapter nut. The perfect concentric fi t guarantees maximum strength and good balance, even at extreme RPM.

92-103cat2009.indd 9792-103cat2009.indd 97 20-01-2009 21:54:5820-01-2009 21:54:58

Page 98: Protech catalog

98

MA145Wheel w/ nylon rim 50mm, 2pcs

MA185Wheel w/ nylon rim 125mm, 2pcs

MA146Wheel w/ nylon rim 57mm, 2pcs

MA151Wheel w/ alu rim 19mm, 1pcs

MA147Wheel w/ nylon rim 63mm, 2pcs

MA152Wheel w/ alu rim 25mm, 1pcs

MA148Wheel w/ nylon rim 69mm, 2pcs

MA153Wheel w/ alu rim 30mm, 1pcs

MA149Wheel w/ nylon rim 73mm, 2pcs

MA143Wheel w/ nylon rim 38mm, 2pcs

MA183Wheel w/ nylon rim 90mm, 2pcs

MA144Wheel w/ nylon rim 44mm, 2pcs

MA184Wheel w/ nylon rim 100mm, 2pcs

MA155Tailwheel assembly small w/ wheel

PA004Steerable noseleg .25 size* wheel not included

PA005Steerable noseleg .40 size* wheel not included

MA156Undercarriage Ø3,5mm

MA157Undercarriage Ø4mm

MA780Landing gear axle, Ø4mm, 2pcs

MA781Landing gear axle, Ø5mm, 2pcs

MA782Landing gear axle, Ø6mm, 2pcs

MA473Aluminium wheel collar 2mm w/ hex set screw, 4pcs

MA474Aluminium wheel collar 2,5mm w/ hex set screw, 4pcs

MA475Aluminium wheel collar 3mm w/ hex set screw, 4pcs

MA476Aluminium wheel collar 4mm w/ hex set screw, 4pcs

MA477Aluminium wheel collar 5mm w/ hex set screw, 4pcs

MA478Aluminium wheel collar 6mm w/ hex set screw, 4pcs

MA750Nylon landing gear clamp SMALL, 4pcs

MA751Nylon landing gear clampMEDIUM, 4pcs

MA752Nylon landing gear clamp LARGE, 4pcs

MA753Nylon landing gear clamp, fl at, SMALL, 4pcs

MA754Nylon landing gear clamp, fl at, MEDIUM, 4pcs

MA755Nylon landing gear clamp, fl at, LARGE, 4pcs

WHEEL

S&

UNDER

CARR

IAGES

WHEEL

CO

LLARS

92-103cat2009.indd 9892-103cat2009.indd 98 20-01-2009 21:55:1120-01-2009 21:55:11

Page 99: Protech catalog

99

MA135Nylon engine mount .10-.15

MA136Nylon engine mount .20-.30

MA139Nylon engine mount .30-.40

MA140Nylon engine mount .45-.61

MA188Nylon engine mount .61-.90

MA680Steering arm Ø3mm, 16mm, 1pc

MA742Wheel cover holder 5mm, 2pcs

MA743Wheel cover holder 6mm, 2pcs

MA171Steering arm Ø3mm, 33mm, 1pc

MA172Steering arm Ø4mm, 33mm, 1pc

MA741Wheel cover holder 4mm, 2pcs

MA740Wheel cover holder 3mm, 2pcs

MA681Steering arm Ø4mm, 16mm, 1pc

MA449Wheel collar 1,5mm w/ hex set screw, 5pcs

MA450Wheel collar 2mm w/ hex set screw, 5pcs

MA448Wheel collar 2,5mm w/ hex set screw, 5pcs

MA451Wheel collar 3mm w/ hex set screw, 5pcs

MA650Plastic clevis w/ brass pin MI-CRO, 2pcs

MA452Wheel collar 4mm w/ hex set screw, 5pcs

MA651Plastic clevis M2 w/ brass pin SMALL, 2pcs

MA453Wheel collar 5mm w/ hex set screw, 5pcs

MA652Plastic clevis M3 w/ brass pin LARGE, 2pcs

MA454Wheel collar 6mm w/ hex set screw, 5pcs

MA101Plastic clevis M2, 4pcs

MA104Plastic clevis w/ locking screw, for wires up to Ø2mm, 2pcs

MA100Plastic snap link, 4pcs

MA654Aluminium clevis heavy duty M2, 2pcs

MA655Aluminium clevis heavy duty M3, 2pcs

MA660Aluminium clevis heavy duty M3, 2pcs

MA661Aluminium clevis heavy duty M4, 2pcs

ENGIN

EMO

UNTS

CLEV

ISES

MA490.1Metal clevis M2, 5pcs

MA490Metal clevis M2, 10pcs

MA491.1Metal clevis M2,5, 5pcs

92-103cat2009.indd 9992-103cat2009.indd 99 20-01-2009 21:55:5420-01-2009 21:55:54

Page 100: Protech catalog

100

MA492Metal clevis M3, 10pcs

MA485.1Threaded coupler M2 Ø0,8mm, 5pcs

MA491Metal clevis M2,5, 10pcs

MA492.1Metal clevis M3, 5pcs

MA481Threaded coupler M2 Ø1,6mm, 10pcs

MA485Threaded coupler M2 Ø0,8mm, 10pcs

MA480.1Threaded coupler M2 Ø1,2mm, 5pcs

MA480Threaded coupler M2 Ø1,2mm, 10pcs

MA481.1Threaded coupler M2 Ø1,6mm, 5pcs

MA482.1Threaded coupler M2 Ø2,1mm, 5pcs

MA482Threaded coupler M2 Ø2,1mm, 10pcs

MA483.1Threaded coupler M2,5Ø2,3mm, 5pcs

MA484.1Threaded coupler M3Ø2,8mm, 5pcs

MA483Threaded coupler M2,5Ø2,3mm, 10pcs

MA484Threaded coupler M3Ø2,8mm, 10pcs

MA486.1Threaded coupler M2 for carbon rod Ø3mm, 5pcs

MA486Threaded coupler M2 for car-bon rod Ø3mm, 10pcs

MA487.1Threaded coupler M3 for carbon rod Ø3mm, 5pcs

MA765Solid brass turnbuckles M2,5, 2pcs

MA766Solid brass turnbuckles M3, 2pcs

MA541.10Brass cable coupler M3, 10pcs

MA540Brass cable coupler M2, 2pcs

MA540.10Brass cable coupler M2, 10pcs

MA541Brass cable coupler M3, 2pcs

MA487Threaded coupler M3 for car-bon rod Ø3mm, 10pcs

MA499Metal clevis M3 + threaded coupler M3 for carbon rod Ø3mm, 2pcs

MA495Metal clevis M2 + threaded cou-pler M2 - Ø2,1mm, 2pcs

MA496Metal clevis M2,5 + threaded coupler M2,5 - Ø2,3mm, 2pcs

MA497Metal clevis M3 + threaded cou-pler M3 - Ø2,8mm, 2pcs

MA498Metal clevis M2 + threaded coupler M2 for carbon rod Ø3mm, 2pcs

THRE

ADED

COUP

LERS

BALL

LINKS

MA102Ball link M2 LARGE, 2pcs

MA103Ball link M2 SMALL, 2pcs

MA500Ball link M2 standard, 10pcs

92-103cat2009.indd 10092-103cat2009.indd 100 20-01-2009 21:56:3520-01-2009 21:56:35

Page 101: Protech catalog

101

MA700Ball link M2 w/ M1,6 screw, 2pcs

MA706Ball link M3 LONG, 2pcs

MA707Ball link M3 SHORT w/ M3 screw, 2pcs

MA501Ball link M3 standard, 10pcs

MA502Ball l ink M2,5 standard, 10pcs

MA711Aluminium precision ball link M3, 2pcs

MA708Ball link M3 LONG w/ M3 screw, 2pcs

MA709Aluminium precision ball link M2, 2pcs

MA710Aluminium precision ball link M2,5, 2pcs

MA712Aluminium precision ball link M4, 2pcs

MA521Metal push rod Ø2,5mm w/ M2 thread, 200mm, 5pcs

MA520Metal push rod Ø1,7mm w/ M2 thread, 200mm, 5pcs

MA522Metal push rod Ø2,1mm w/ M2,5 thread, 200mm, 5pcs

MA523Metal push rod Ø2,6mm w/ M3 thread, 200mm, 5pcs

MA530Steel push rod fully threaded M2, 200mm, 5pcs

MA531Steel push rod fully threaded M2,5, 200mm, 5pcs

MA532Steel push rod fully threaded M3, 200mm, 5pcs

MA685Carbon push rod Ø3mm w/ M2 metal clevises, 300mm, 1set

MA686Carbon push rod Ø3mm w/ M3 metal clevises, 300mm, 1set

MA691 Plastic push rod set 1m, 2pcsMA692 Plastic push rod set 1.5m, 2pcs

MA701Ball link M2 SHORT w/ M1,6 screw, 2pcs

MA702Ball link M2 LONG w/ M1,6 screw, 2pcs

MA703Ball link M2 SHORT, 2pcs

MA704Ball link M2 LONG, 2pcs

MA705Ball link M3 SHORT, 2pcs

MA760Tripple rod connector for Ø2mm wires, 1pc

MA761Tripple rod connector for Ø3mm wires, 1pc

PA006Adjustable push rod connec-tor, 4pcs

PUSH

RODS

MA672Control horn 19mm SMALL, 1,6mm holes w/ M2 screws, 2pcs

MA673Heavy duty control horn 34mm, 2,5mm holes w/ M3 screws, 2pcs

MA670Control horn 8mm MICRO, 1mm holes, 2pcs

MA671Control horn 19mm SMALL, 1mm holes w/ M2 screws, 2pcs

CONT

ROL

HORN

S

Plastic push rod with M2 threaded coupler and M2 metal clevis + Ø1mm steel piano wire inside the

inner plastic tube.

92-103cat2009.indd 10192-103cat2009.indd 101 20-01-2009 21:57:1720-01-2009 21:57:17

Page 102: Protech catalog

102

MA114Control horn 30mm LARGE, 1,6mm holes w/ M2 screws, 2pcs

MA113Control horn 22mm SMALL, 1,6mm holes w/ M2 screws, 2pcs

MA675Adjustable control horn heavy duty, 32mm w/ M2 screws, 2pcs

MA460Control horn 29mm SMALL, 2,2mm holes w/ TP-screws, 2pcs

MA461Control horn 34mm LARGE, 1,6mm holes w/ 2.2mm TP-screws, 2pcs

MA462Control horn reinforced 34mm LARGE, 1,6mm holes w/ 2.2mm TP-screws, 2pcs

MA676Adjustable control horn heavy duty, 32mm w/ M2,2 TP-screws, 2pcs

MA725Pin hinge 47mm x Ø3,5mm, 12pcs

MA720Pinned hinge 32x14mm, 10pcs

MA471Pinned hinge 34x17mm, 10pcs

MA472Pinned hinge 39x20mm, 10pcs

MA118Rubber bands 80x6mm, 12pcs

MA120Rubber bands 125x10mm, 8pcs

MA121Rubber bands 150x10mm, 8pcs

MA119Rubber bands 100x6mm, 12pcs

MA181Rubber bands 200x13mm, 6pcs

MA122Rubber bands 180x10mm, 6pcs

MA690Cable control set complete

MA170Aileron linkage, 1pair

MA723Flex hinge 20x10mm SMALL, 12pcs

MA724Flex hinge 28x16mm LARGE, 12pcs

MA470Poly hinge 25x20mm, 12pcs

MA722Flex hinge 7x3,5mm MICRO, 12pcs

HINGE

S

RUBB

ERBA

NDS

MA732Nylon threaded block M6, 2pcs

MA730Nylon threaded block M4, 2pcs

MA731Nylon threaded block M5, 2pcs

MA870Cockpit latch, 1pc

MA876Tow release for gliders up to 3,5m, 1pc

MA877Tow release for gliders up to 7m, 1pc

MA873U-shaped rubber band to contour canopies, motorcowl-ings, etc., 1m

WING

MOUN

TS

CANO

PY

ACC.

TOW

RE

LEASE

92-103cat2009.indd 10292-103cat2009.indd 102 20-01-2009 21:58:5320-01-2009 21:58:53

Page 103: Protech catalog

103

AT006Bust REGGY 1/4110x120mm

AT007Bust MIKE/JET 1/4155x133mm

AT008Bust PHILIP 1/4145x117mm

AT009Bust RONNY 1/5185x110mm

AT010Bust ERIC 1/5105x101mm

AT011Bust WERNER 1/5100x100mm

AT028Bust EMIL 1/845x53mm

AT029Bust NORBERT 1/845x53mm

AT030Bust SERGE 1/845x53mm

AT031Bust JAN/JEAN 1/845x53mm

AT032Bust TOM/JET 1/846x54mm

AT050Bust MARC 1/4105x105mm

AT051Bust DENNIS 1/4120x120mm

AT052Bust CAPTAIN 1/4145x134mm

AT053Bust CO-PILOT 1/4130x140mm

AT054Bust NAVIGATOR 1/4136x140mm

AT055Bust WEEKEND 1/4130x135mm

AT060Bust DENNIS 1/595x93mm

AT061Bust CAPTAIN 1/5118x116mm

AT012Bust EVA 1/5135x97mm

AT013Bust CASCADEUR 1/685x70mm

AT014Bust PIRATE 1/690x71mm

AT015Bust BLERIOT 1/6135x100mm

AT017Bust NADIA 1/680x70mm

AT019Bust LOUIS 1/692x73mm

AT020Bust ANN 1/693x68mm

AT021Bust PIETER/JET 1/677x73mm

AT024Bust GUYNEMER 1/678x78mm

AT025Bust PETER 1/660x71mm

AT026Bust LESTER 1/663x71mm

AT027Bust LUC 1/762x60mm

AT022Bust GRAND GUERRE 1/680x72mm

AT023Bust PIERRE 1/666x73mm

AT062Bust CO-PILOT 1/5102x110mm

AT063Bust NAVIGATOR 1/5114x108mm

AT064Bust WEEKEND 1/5105x105mm

AT070Bust DENNIS 1/675x75mm

AT071Bust MAT/JET 1/675x68mm

AT072Bust CAPTAIN 1/685x80mm

AT073Bust CO-PILOT 1/682x78mm

AT074Bust NAVIGATOR 1/685x81mm

AT075Bust WEEKEND 1/690x86mm

AT076Bust SPORTMAN 1/690x80mm

All the Pilot busts are painted and fi nished.

92-103cat2009.indd 10392-103cat2009.indd 103 20-01-2009 21:59:3620-01-2009 21:59:36

Page 104: Protech catalog

104

MA200Plastic coupling unit, 1pc

MA201Plain bore insert for 2mm shaft, 1pc

MA202Plain bore insert for 2,3mm shaft, 1pc

MA203Plain bore insert for 3mm shaft, 1pc

MA204Plain bore insert for 3,2mm shaft, 1pc

MA205Plain bore insert for 4mm shaft, 1pc

MA206Plain bore insert for 5mm shaft, 1pc

MA207Plain bore insert for 6mm shaft, 1pc

MA214Coupling insert w/ M3 thread, 1pc

MA209Coupling insert w/ M5 thread, 1pc

MA210Coupling insert w/ M6 thread, 1pc

MA211Coupling insert w/ 1/4-28UNF thread, 1pc

MA208Coupling insert w/ M4 thread, 1pc

MA212Double convertor, 1pc

MA220Rudder micro 20x32mm, 1pc

MA221Rudder mini 25x40mm, 1pc

MA222Rudder small 30x45mm, 1pc

MA224Rudder large 40x60mm, 1pc

MA225Rudder X-large 45x68mm, 1pc

MA223Rudder medium 35x53mm, 1pc

BOAT RUDDERS

Shiny brass rudder blades with brass rudder posts sleeved with a threaded glass filled nylon bearing tube. All brass nuts and retaining washers supplied, together with a strong, glass fi lled nylon tiller arm. Available in 6 sizes to suit a wide variety of applications.

DURAFLEX COUPLINGS

These couplings are available in a wide range of sizes to suit almost all applications. You can make up your own coupling by choosing two brass inserts that suit the shaft to be joined, then push them into a coupling unit to form the complete unit. These couplings are suitable for electric and IC powered drive units and accept a drive angle up to 15°. All coupling inserts with set screw fi tting are supplied with a 1,5mm hex key.

MA175Boat aerials, 1pc

104-112cat2009.indd 104104-112cat2009.indd 104 20-01-2009 22:47:0620-01-2009 22:47:06

Page 105: Protech catalog

105

MA1304Rubber shock mount M5, 2pcs

MA1311Rubber shock mount M4, 2pcs

MA1315Rubber shock mount M5, 2pcs

MA1316Rubber shock mount M6, 2pcs

MA1301Rubber shock mount M4, 2pcs

MA1302Rubber shock mount M4, 2pcs

MA1303Rubber shock mount M4, 2pcs

MA1312Rubber shock mount M4, 2pcs

MA1313Rubber shock mount M4, 2pcs

MA1317Rubber shock mount M6, 2pcs

MA1318Rubber shock mount M6, 2pcs

MA1330Rubber shock mount M4, 4pcs

MA1310Rubber shock mount M3, 2pcs

MA1331Rubber shock mount M5, 4pcs

MA1314Rubber shock mount M5, 2pcs

MA1332Rubber shock mount M6, 4pcs

MA1300Rubber shock mount M3, 2pcs

MA1307Rubber shock mount M6, 2pcs

MA1305Rubber shock mount M5, 2pcs

MA1306Rubber shock mount M6, 2pcs

Ref. nr. Description D1 D2 L1 L2 HardnessMA1300 Rubber shock mount, 2pcs M3 8mm 6mm 8mm 55°shoreMA1301 Rubber shock mount, 2pcs M4 10mm 10mm 10mm 55°shoreMA1302 Rubber shock mount, 2pcs M4 10mm 10mm 15mm 55°shoreMA1303 Rubber shock mount, 2pcs M4 15mm 15mm 15mm 55°shoreMA1304 Rubber shock mount, 2pcs M5 15mm 15mm 15mm 55°shoreMA1305 Rubber shock mount, 2pcs M5 15mm 15mm 20mm 55°shoreMA1306 Rubber shock mount, 2pcs M6 20mm 15mm 20mm 55°shoreMA1307 Rubber shock mount, 2pcs M6 20mm 15mm 15mm 55°shore

Ref. nr. Description D1 D2 D3 L1 L2 HardnessMA1310 Rubber shock mount, 2pcs M3 8mm M3 6mm 8mm 55°shoreMA1311 Rubber shock mount, 2pcs M4 10mm M4 10mm 10mm 55°shoreMA1312 Rubber shock mount, 2pcs M4 10mm M4 10mm 15mm 55°shoreMA1313 Rubber shock mount, 2pcs M4 15mm M4 15mm 15mm 55°shoreMA1314 Rubber shock mount, 2pcs M5 15mm M5 15mm 15mm 55°shoreMA1315 Rubber shock mount, 2pcs M5 15mm M5 15mm 20mm 55°shoreMA1316 Rubber shock mount, 2pcs M6 20mm M6 15mm 20mm 55°shoreMA1317 Rubber shock mount, 2pcs M6 20mm M6 15mm 15mm 55°shoreMA1318 Rubber shock mount, 2pcs M6 25mm M6 15mm 30mm 55°shore

Ref. nr. Description D1 D2 L1 L2 HardnessMA1330 Rubber shock mount M4 8mm 1,4mm 8mm 55°shoreMA1331 Rubber shock mount M5 10mm 0,9mm 10mm 55°shoreMA1332 Rubber shock mount M6 13mm 1,3mm 10mm 55°shore

Finally an easy solution to lower the noise and vibration of your model. These rubber shock mounts can be easily installed using a standard motor mount. Just enlarge the holes in the fi rewall , slide the rubber shock mount in place and reattach the motor mount. Can be used for engines from 2,5cc up to 100cc.

104-112cat2009.indd 105104-112cat2009.indd 105 20-01-2009 22:47:3020-01-2009 22:47:30

Page 106: Protech catalog

106

Ref. nr. Description (packed 10pcs)MA2020 Pan head screw M1,6x6MA2021 Pan head screw M1,6x8MA2022 Pan head screw M1,6x12MA2023 Pan head screw M2x6MA2024 Pan head screw M2x8MA2025 Pan head screw M2x12MA2026 Pan head screw M2x20MA2027 Pan head screw M2,5x8MA2028 Pan head screw M2,5x12MA2029 Pan head screw M2,5x16MA2030 Pan head screw M2,5x20

Ref. nr. Description (packed 10pcs)MA2031 Pan head screw M3x8MA2032 Pan head screw M3x12MA2033 Pan head screw M3x16MA2034 Pan head screw M3x20MA2035 Pan head screw M3x25MA2036 Pan head screw M3x30MA2037 Pan head screw M4x10MA2038 Pan head screw M4x12MA2039 Pan head screw M4x16MA2040 Pan head screw M4x20MA2041 Pan head screw M4x25MA2042 Pan head screw M4x30

Ref. nr. Description (packed 10pcs)

MA2260 Countersunk screw M3x6MA2261 Countersunk screw M3x8MA2262 Countersunk screw M3x10MA2263 Countersunk screw M3x12MA2264 Countersunk screw M3x16MA2265 Countersunk screw M3x20MA2267 Countersunk screw M3x30MA2268 Countersunk screw M4x10MA2269 Countersunk screw M4x12MA2270 Countersunk screw M4x16MA2271 Countersunk screw M4x20MA2272 Countersunk screw M4x25MA2273 Countersunk screw M4x30

Ref. nr. Description (packed 10pcs)MA2060 Socket head screw M2x5MA2061 Socket head screw M2x8MA2062 Socket head screw M2x12MA2063 Socket head screw M2,5x12MA2064 Socket head screw M2,5x20MA2065 Socket head screw M3x6MA2066 Socket head screw M3x8MA2067 Socket head screw M3x10MA2068 Socket head screw M3x12MA2069 Socket head screw M3x16MA2070 Socket head screw M3x20MA2071 Socket head screw M3x25MA2072 Socket head screw M3x30MA2073 Socket head screw M4x10MA2074 Socket head screw M4x12MA2075 Socket head screw M4x16MA2076 Socket head screw M4x20MA2077 Socket head screw M4x30MA2078 Socket head screw M4x35MA2079 Socket head screw M4x40MA2080 Socket head screw M5x10MA2081 Socket head screw M5x16MA2082 Socket head screw M5x20MA2083 Socket head screw M5x25MA2084 Socket head screw M5x30MA2085 Socket head screw M5x40MA2086 Socket head screw M6x10MA2087 Socket head screw M6x16MA2088 Socket head screw M6x20MA2089 Socket head screw M6x25MA2090 Socket head screw M6x30MA2091 Socket head screw M6x35MA2092 Socket head screw M6x45

Ref. nr. Description (packed 10pcs)MA2180 Countersunk socket head screw M3x6MA2181 Countersunk socket head screw M3x8MA2182 Countersunk socket head screw M3x10MA2183 Countersunk socket head screw M3x12MA2184 Countersunk socket head screw M3x16MA2185 Countersunk socket head screw M3x20MA2186 Countersunk socket head screw M3x25MA2187 Countersunk socket head screw M3x30MA2188 Countersunk socket head screw M4x10MA2189 Countersunk socket head screw M4x12MA2190 Countersunk socket head screw M4x16MA2191 Countersunk socket head screw M4x20MA2192 Countersunk socket head screw M4x25MA2193 Countersunk socket head screw M4x30MA2194 Countersunk socket head screw M4x35MA2195 Countersunk socket head screw M4x40MA2196 Countersunk socket head screw M5x10MA2197 Countersunk socket head screw M5x16MA2198 Countersunk socket head screw M5x20MA2199 Countersunk socket head screw M5x25MA2200 Countersunk socket head screw M5x30MA2201 Countersunk socket head screw M5x40

Ref. nr. Description (packed 10pcs)MA2120 E-clips 1,5mmMA2121 E-clips 1,9mmMA2122 E-clips 2,3mmMA2123 E-clips 3,2mmMA2124 E-clips 4mmMA2125 E-clips 5mmMA2126 E-clips 6mmMA2127 E-clips 7mm

104-112cat2009.indd 106104-112cat2009.indd 106 20-01-2009 22:47:4620-01-2009 22:47:46

Page 107: Protech catalog

107

Ref. nr. Description (packed 10pcs)MA2210 Pan head TP-screw 2,2x6.5MA2211 Pan head TP-screw 2,2x9.5MA2212 Pan head TP-screw 2,9x6.5MA2213 Pan head TP-screw 2,9x9.5MA2215 Pan head TP-screw 2,9x13MA2216 Pan head TP-screw 2,9x16MA2217 Pan head TP-screw 2,9x19MA2218 Pan head TP-screw 3,5x13MA2219 Pan head TP-screw 3,5x16MA2220 Pan head TP-screw 3,5x25MA2221 Pan head TP-screw 3,5x32MA2222 Pan head TP-screw 4,2x13MA2223 Pan head TP-screw 4,2x16MA2224 Pan head TP-screw 4,2x19MA2225 Pan head TP-screw 4,2x25

Ref. nr. Description (packed 10pcs)MA2240 Countersunk TP-screw 2,9x6.5MA2241 Countersunk TP-screw 2,9x9.5MA2242 Countersunk TP-screw 2,9x13MA2243 Countersunk TP-screw 2,9x16MA2244 Countersunk TP-screw 2,9x25MA2245 Countersunk TP-screw 3,9x13MA2246 Countersunk TP-screw 3,9x16MA2247 Countersunk TP-screw 3,9x19MA2248 Countersunk TP-screw 4,2x13MA2249 Countersunk TP-screw 4,2x16MA2250 Countersunk TP-screw 4,2x22MA2251 Countersunk TP-screw 4,2x25MA2252 Countersunk TP-screw 4,2x32

Ref. nr. Description (packed 10pcs)MA2050 Set screw M3x3MA2051 Set screw M3x5MA2052 Set screw M4x4MA2053 Set screw M4x6MA2054 Set screw M4x10MA2055 Set screw M4x16MA2056 Set screw M5x5MA2057 Set screw M5x10MA2058 Set screw M5x20

Ref. nr. Description (packed 10pcs)MA2280 Shim ring steel 4x8x0,3mmMA2281 Shim ring steel 5x10x0,3mmMA2282 Shim ring steel 6x12x0,3mmMA2283 Shim ring steel 8x14x0,3mmMA2285 Shim ring steel 4x8x0,5mmMA2286 Shim ring steel 5x10x0,5mmMA2287 Shim ring steel 6x12x0,5mmMA2288 Shim ring steel 8x14x0,5mm

Ref. nr. Description (packed 4pcs)MA2130 Hex blind nuts M3MA2131 Hex blind nuts M4

Ref. nr. Description (packed 4pcs)MA2160 Nylon bolt M4x20MA2161 Nylon bolt M5x30MA2162 Nylon bolt M6x40

Ref. nr. Description (packed 10pcs)MA2101 Flat washers 2,2x5mmMA2102 Flat washers 2,7x6mmMA2103 Flat washers 3,2x7mmMA2104 Flat washers 4,3x9mmMA2105 Flat washers 5,3x10mmMA2106 Flat washers 6,4x12mmMA2107 Flat washers 8,4x16mm

Ref. nr. Description (packed 4pcs)MA2140 Blind nuts M3MA2141 Blind nuts M4MA2142 Blind nuts M5MA2143 Blind nuts M6

Ref. nr. Description (packed 10pcs)MA2010 Nylstop nut M2MA2011 Nylstop nut M3MA2012 Nylstop nut M4MA2013 Nylstop nut M5MA2014 Nylstop nut M6

Ref. nr. Description (packed 10pcs)MA2000 Hexagonal nut M1,6MA2001 Hexagonal nut M2MA2002 Hexagonal nut M2,5MA2003 Hexagonal nut M3MA2004 Hexagonal nut M4MA2005 Hexagonal nut M5

Ref. nr. Description (packed 10pcs)PL200 Cable tie 2,5x102mm, 10pcsPL201 Cable tie 2,5x200mm, 10pcsPL202 Cable tie 3,5x145mm, 10pcsPL203 Cable tie 3,5x215mm, 10pcsPL204 Cable tie 4,7x160mm, 10pcsPL205 Cable tie 4,7x200mm, 10pcsPL206 Cable tie 4,7x285mm, 10pcsPL207 Cable tie 4,7x360mm, 10pcs

Ref. nr. Description (packed 5pcs)T51.061 Quick release cable ties 7x290mm, 5pcs

Ref. nr. Description (packed 10pcs)PA007 Body clips 1/8 scalePA008 Body clips 1/10 scale

104-112cat2009.indd 107104-112cat2009.indd 107 20-01-2009 22:47:5420-01-2009 22:47:54

Page 108: Protech catalog

108

PT115Hex wrench 1,5mm

PT260Socket driver 6,0mm

PT458Phillips screwdriver 5,8mm

PT280Socket driver 8,0mm

PT250Socket driver 5,0mm

PT440Phillips screwdriver 4,0mm

PT330Flat screwdriver 3,0mm

PT255Socket driver 5,5mm

PT450Phillips screwdriver 5,0mm

PT340Flat screwdriver 4,0mm

PT130Hex wrench 3,0mm

PT350Flat screwdriver 5,0mm

PT140Hex wrench 4,0mm

PT270Socket driver 7,0mm

PT245Socket driver 4,5mm

PT430Phillips screwdriver 3,0mm

PT150Hex wrench 5,0mm

PT120Hex wrench 2,0mm

PT125Hex wrench 2,5mm

R/C PROFI TOOLSA superb range of professional R/C tools for the demanding modeller. The ergo-nomic shape of the 7075 T-6 aluminium hollow handle guarantees a perfect grip. All tips are made of special hardened steel for long life and to prevent damage to the screw heads. Special attention is given to the length of the tools, so that even diffi cult places are accessible.

104-112cat2009.indd 108104-112cat2009.indd 108 20-01-2009 22:48:0720-01-2009 22:48:07

Page 109: Protech catalog

109

PT400Phillips screwdriver set, 4pcs (3mm; 4mm; 5mm; 5,8mm)

PT100Hex wrench set, 4pcs (1,5mm; 2mm; 2,5mm; 3mm)

104-112cat2009.indd 109104-112cat2009.indd 109 20-01-2009 22:48:3920-01-2009 22:48:39

Page 110: Protech catalog

110

T0165Sealing iron

T0165.UKSealing iron UK

The automatic sealing iron is the tool you need for a perfect cover-ing job. The temperature of this sealing iron is adjustable for all fi lms on the market. The temperature is controlled automatically within a range of ±2°C.

• The iron shoe is custom designed to reach all diffi cult spots.• The shoe is Tefl on coated for a smooth covering.

This is the tool a lot of modellers were waiting for. The fi ne seal-ing iron will reach any place on your model. The temperature can be switched from high to low.Round & fl at iron shoe included.

• Optimum shaped fl at and round trim shoe.• Trim shoes are coated with non-scratch Tefl on.

T0166Fine sealing iron

T0166.UKFine sealing iron UK

AK100Curved scissors

Purposely designed curved scis sors to cut all plastic ma te ri als, es pe cial ly polycarbonate. The curved an gle will help you to cut smooth curves for wheels, etc ... The scis sors are made of hard ened steel and will cut up to 2 mm thick polycarbonate.

T0164Z-bender

For easy bending of conrol rod ends to fi t servo-arms. Hardened steel jaws.

The ideal tool to enlarge the hole in your propel-ler or spin ner, perfectly centered. The reamer is divided in 5 sections: 4,5 mm - 6,2 mm - 7 mm - 8 mm - 9,5 mm. The ream er is made of fi rst class HSS steel.

The ideal tool to make perfect lyround holes in any kind of plas tic ma te ri al. To drill or en large holes from 3 mm to 14 mm. The ream er is made from of class HSS steel.

AK102Propeller & spinner reamer

AK101Knife edge reamer

104-112cat2009.indd 110104-112cat2009.indd 110 20-01-2009 22:48:4720-01-2009 22:48:47

Page 111: Protech catalog

111

PROTECH CA GLUES

A120-25CA glue 120

MEDIUM, 25g

A180-25CA glue 180THICK, 25g

A105-50CA glue 105THIN, 50g

A120-50CA glue 120

MEDIUM, 50g

A180-50CA glue 180THICK, 50g

A500-285-min epoxy glue, 28g

A600Nut lock, 15g

Use nut lock on all nuts & bolts which need to be protected from vibrations, but still need to loosened easely.

A105-25CA glue 105THIN, 25g

LX906Air fi lter oil, 50ml

Special oil for foam fi lters only. The oil is applied on the foam fi lter by squeezing the foam and the oil becomes sticky to provide optimal dust fi ltering.

Silicon oils for shock absorbers & differentialsA range of high quality silicon oils. The advantage of silicon oil is the constant viscosity under different tem per a tures. The higher the number, the thicker the viscosity. Silicon oils from 100 to 2500 cps are used in shock absorbers and from 2500 to 100000 cps can be used in differentials.

SL450Silicon oil 450 cps, 50mlSL500Silicon oil 500 cps, 50mlSL600Silicon oil 600 cps, 50mlSL700Silicon oil 700 cps, 50mlSL800Silicon oil 800 cps, 50mlSL900Silicon oil 900 cps, 50mlSL1000Silicon oil 1000 cps, 50ml

TH

INTH

ICK

SL2500Silicon oil 2500 cps, 50mlSL5000Silicon oil 5000 cps, 50mlSL10000Silicon oil 10000 cps, 50mlSL30000Silicon oil 30000 cps, 50mlSL50000Silicon oil 50000 cps, 50mlSL100000Silicon oil 100000 cps, 50ml

SO

FT

MED

IUM

HA

RD

Silicon differential oil

SL001High speed grease, 250g

Special sticky grease for differentials, gears and ball bearings. Water repellent.

SL100Silicon oil 100 cps, 50mlSL150Silicon oil 150 cps, 50mlSL200Silicon oil 200 cps, 50mlSL250Silicon oil 250 cps, 50mlSL300Silicon oil 300 cps, 50mlSL350Silicon oil 350 cps, 50mlSL400Silicon oil 400 cps, 50ml

TH

INM

EDIU

M

A601Stud lock, 15g

Use stud lock on all nuts & bolts which may never be-come loose anymore.

104-112cat2009.indd 111104-112cat2009.indd 111 20-01-2009 22:48:5520-01-2009 22:48:55

Page 112: Protech catalog

This catalog is an edition of PROTECH®, Geelseweg 80, B-2250 OLEN (Belgium). This catalog is protected by a copyright and nothing from this edition may be reproduced or used without any prior written authorisation. Whilst every effort has been made to ensure the accuracy of the information in this catalog, errors do creep in and PROTECH® can accept no responsibility for failures, wrong specifi cations, accuracy of colours, losses or damages caused. PROTECH® denies any responsability claims or damages caused by use of our products. PROTECH® is not responsable for product changes or availability of our products. The products of dangerous nature included in this catalog are submissive to special handling and storage specifi cations. Please check with your local authorities for existing legislation.

104-112cat2009.indd 112104-112cat2009.indd 112 20-01-2009 22:49:2220-01-2009 22:49:22