Proserv Gilmore 1-1/2” POCV Pilot Operated Check · PDF fileQualification API 16D Outlet...

Proserv Gilmore Valve provides check valves for nearly any application.

Our soft seated 1” and 1 1/2” piloted check valves are available for operating pressures up to 6,000 psi. They provide large flow capacity in multiple config-urations. The valves soft seat design is extremely tolerant of fluid contami-nation. These valves feature zero leakage, resistance to hammer shock seat damage and 1:4 pilot to supply ratio in a wide variety of materials.

Various other connection styles are also available.

Features & Benefits

• External pilot vent• Internal pilot vent• Captured pilot vent• Non-piloted • Cartridge non-piloted• Double check• Topside trim• Subsea trim• Custom manifold mounting arrangement• Custom materials

DRILLINGPRODUCT SPECIFICATION SHEET

Proserv Gilmore 1-1/2” POCV Pilot Operated Check Valve

ingenious simplicity

[email protected]

Technical Specification

Can be customised to suit requirements

ValveSupply Pressure Rating

Pilot Pressure Rating

Full Open Cv

Full Open Peak FlowCapacity

Port Style Fluids Qualification

1” 6,000 psi 6,000 psi 11.5 225 GPMNPT, SAE,Code 62,BSPP, SealSub

Water BasedHydraulic Fluids,Oil BasedHydraulic Fluids

API 16D

1 1/2”6,000 psi 6,000 psi 30 350 GPM NPT, SAE,

Code 62,BSPP, SealSub


API 16D

* Illustrated Valve PN 28457: Commonly utilized subsea as a two-way N.C. control valve in rigid hydraulic conduit LMRP circuits. The subsea trim includes stainless steel coil springs and a T316 or A564 T630 body.

Pilot

Inlet

Outlet

Proserv Gilmore Valve provides check valves for nearly any application.

Our soft seated 1/2” piloted check valves provide a medium flow capacity in a multiple of configurations up to 10,000 psi. The valves soft seat design is extremely tolerant of fluid contamination. This valve features zero leakage, resistance to hammer shock seat damage and 1:4 pilot to supply ratio in a wide variety of materials.

Various other connection options are also available.

Features & Benefits

• External pilot vent• Internal pilot vent• Captured pilot vent• Non-piloted • Cartridge non-piloted• Topside trim• Subsea trim• Custom manifold mounting arrangement• Custom materials


Proserv Gilmore 1/2” POCV Pilot Operated Check Valve


[email protected]



Supply Pressure Rating

Pilot Pressure Rating

Full Open Cv Full Open Peak FlowCapacity


10,000 psi 10,000 psi 1.6 30 GPM NPT, SAE, BSPP


API 16D

* Illustrated Valve PN 22720: Commonly used subsea in wellhead and riser connector circuits where the latching mechanism needs to be locked in position with hydraulic pressure, and disconnected by piloting to de-pressurize. The subsea trim includes a stainless coil spring and T316 body.

Outlet

Pilot

Inlet

Pilot

Inlet

Outlet

Building on our pedigree in wireline tool sampling valves and the proven line of Proserv Gilmore drilling control valves, we are pleased to introduce the Critical Service valve suite. Utilizing our patent pending dual direction Key SealTM technology, we have developed a line of control valves for the harshest environments encountered in the oilfield. We push the envelope of higher pressures and temperatures while operating on clean and corrosive, debris laden fluids. Allow us to custom design a valve for your application.

Proserv Gilmore has seen demand in the industry for a shear seal regula-tor that can be set precisely, one that is reliable with high repeatability in performance and can be used with less than pristine control fluids. The next generation Proserv Gilmore precision regulator provides these features and more. The design parameters allow for use as three different regulators, a Supply Only Design, a Supply and Venting Regulator or a Back Pressure Reg-ulator depending on how it is configured. It has a low dead band, capable of handling a 20,000 PSI supply and has a relatively high flow at a low pressure differential. The valve performance is extremely repeatable and it does not drift. When installed in a proper circuit, its performance is chatter free. It can be manually adjusted or piloted with either a hydraulic or pneumatic actuator. It is engineered to be installed in a pocket, panel or mounted separately.

Features & Benefits • Conditions of Service: 28,500 PSI, Cv varies based on configuration• Maximum range up to 25,000 PSI regulated pressure• Low dead band allows for greater sensitivity• Shear seal technology provides for operation with high debris tolerance• Can be field repaired to minimize downtime


Proserv Gilmore Critical Service Precision Regulator


[email protected]



Pocket 2.5” OD x 5.625” Long

Flow Capacity Cv = 0.2

Primary Seal Shear Seal

Pressure Rating 20,000 PSI

Temperature Range 32oF to 250oF

Port Style Varies but typically MP or HP

Fluids NAS Class 12 or better

Piloted Pocket Configuration Shown

Pilot

Vent

Regulated

Supply

Proserv Gilmore Valve’s Pressure Regulators are the ideal no-leakage solu-tion for maintaining and limiting downstream pressure. Hardened stainless steel hydro-seals are precision lapped to provide a durable positive seal and develop a wiping action that resists contamination.

With the Dual Inlet regulator we’ve taken proven Proserv Gilmore Valve technology and performance and custom packaged it to suit a wide variety of offshore and subsea pressure regulator applications. Its dual inlet/seal plate ultra-high flow capacity design makes it well suited for many topside and subsea drilling and production control applications.

Features & Benefits

• Pressure gage ports• Manual ball handle or Sealed Lock Nut• Actuation• Topside trim• Subsea trim• 1/2” to 2” regulated port• Tungsten carbide seal trim• Custom manifold mounting arrangements• Custom regulated pressure ranges• Custom materials


Proserv Gilmore Dual Inlet Pressure Regulator


[email protected]


Can be customized to suit requirements


Regulated Pressure Ranges

Actuator Style FullOpenCv

Full Open PeakFlowCapacity


3,000 psi 3,000-3003,000-1,5001,500-750

ManualAir ActuatorHyd PilotAir Dome

18.8 250 GPM NPT, SAE, Code 62, BSPP,Seal-Sub


API 16D

5,000 psi5,000-3005,000-2,5003000-1,5001,500-750


18.8 250 GPMNPT, SAE,Code 62, BSPP,Seal-Sub


API 16D

6,000 psi 6,000-3,0003,000-1,5001,500-750


18.8 250 GPM NPT, SAE,Code 62, BSPP,Seal-Sub


API 16D

* Illustrated Regulator PN 44819-7: Commonly used on topside BOP pod hose reel assemblies which need to be ultra-high capacity for charging of subsea LMRP accumulators. The topside trim includes two 1” Code 62 supply inlets and one 1-1/2” Code 62 regulated outlet.

*Illustrated Regulator PN 44819-85: Similar to the PN 44819-7, the PN 44819-85 topside trim includes two 1” Code 62 supply inlets and one 2” Code 62 regulated outlet.

Vent

Supply

44819-7 44819-85

Vent

Supply

Regulated

Supply

Vent

Vent

Supply

Regulated

The MKIII Shuttle Valve is the result of innovative engineering, close coordi-nation with end users in the field, and the most extensive testing ever performed on one of our shuttle valves. Since its creation in 1999, over 16,000 units of varying design have been sold and used by our customers.

With the MKIII we’ve taken proven Proserv Gilmore Valve technology and performance and packaged it in an innovative valve that’s 50% smaller than conventional shuttle valves. A durable metal-to-metal seal on the shuttle assures long lasting, dependable performance. The unique design improves the performance that you expect from a traditional Proserv Gilmore Shuttle Valve.

Proserv Gilmore’s patented shuttle valve product line features hydraulic cushioning and spring detented designs. Leak-tight stainless steel construc-tion provides for both very low and very high interflow during shifting. The valves may be sub-plate mounted with seal subs for building-block logic configuration. Stainless steel dynamic seal and BUNA-N static seal designs accommodate all drilling control fluids. Some designs have spring or pressure biasing to ensure a preferred flow path. Spring biased adapters are used when a preferred default position of the shuttle is required. Pressure biased adapters are used in emergency applications, such as ROV intervention.

Features & Benefits

• High or low interflow• Dampened• Hi Drag (HD)• Compact design• Metal-to-metal sealing • Minimal components• Field serviceable


Proserv Gilmore MKIII Shuttle Valve


[email protected]



Sizes 1/2”, 1”, 1 - 1/2”

Peak Flow Capacity 80 GPM, 250 GPM, 320 GPM

Shuttle Style Standard, High Drag, Hydraulically Dampened



Port Style NPTF, SAE, MP, BSPP, Flat Face or Seal Sub Code 62

Fluids Water Based Hydraulic Fluids, Oil Based Hydraulic Fluids

Qualification API 16D

Outlet port

Inlet port 2

Inlet port 1

Outlet

Inlet 2Inlet 1

The Proserv Gilmore MKIII shuttle valves can be configured in stacks that permit connections from multiple pressure sources or circuits while decreas-ing tubing/piping connections, which eliminate leak paths and saves space.

Stackable shuttle valves allow for multiple supply circuit redundancy which increases options for closing BOP rams. Ram adapters are popular with some customers because they allow for direct mounting into a BOP and reduce piping requirements. Shuttle stacks are often custom-made per customer’s specific project needs because of the various options available for each inlet.

Piping/tubing connections are readily available in a wide variety of types and sizes. Proserv Gilmore can also accommodate connection configurations to exact customer specifications.

Features & Benefits

• Allow for multiple redundancies of an operator, which increases options for closing BOP rams

• Versatile and configurable design• Ram adapters are popular and allow for direct mounting in BOP and

reduce piping requirements• High or low interflow• Dampened• Hi Drag (HD)• Metal-to-metal sealing• Spring- or pressure-biased adapter options• Field serviceable• Multiple inlet options available; the outlet of one shuttle valve connects

to the inlet of the next valve in the stack


Proserv Gilmore MKIII Stackable Shuttle Valve


[email protected]



Sizes 1/2”, 1”, 1 - 1/2”

Peak Flow Capacity* 80 GPM, 250 GPM, 320 GPM

Shuttle Style Standard, High Drag, Hydraulically Dampened



Port Style NPTF, SAE, MP, BSPP, Flat Face or Seal Sub Code 62

Fluids Water Based Hydraulic Fluids, Oil Based Hydraulic Fluids

Qualification API 16D

* May vary with biased adapters.

Outlet

Inlet 6

Adapter, pressure-biased

Inlet 4

Inlet 2

Inlet 1

Inlet 3

Inlet 5

Outlet

Inlet 6

Inlet 4

Inlet 2

Inlet 5

Inlet 3

Inlet 1


The new generation of the traditional 2W 2P valve incorporates the dual direction key seal along with improved materials, serviceability and increased pressure and temperature capability. Available in Normally Open and Normal-ly Closed configurations, this valve can be used from a mudline to a control system at high pressure and temperature.

Features & Benefits

• Unique dual direction sealing technology• Patent pending Key SealTM technology makes this valve capable of han-

dling debris laden fluids at highly elevated pressure and temperatures• Compact design allows for smaller module configuration• Can be field repaired resulting in less downtime • Cartridge configuration can be plugged into a module provided by Gil-

more or others• NACE MRO175 2009 compliance renders the valve useful in offshore

and subsea environments• This valve has a multi-year successful pedigree in the wireline environ-

ment used as a sample bottle valve


Proserv Gilmore Shear Seal Control Valve: 2-way, 2-position


[email protected]



Pocket 1.875” OD x 4” long

Flow Capacity Cv = 1.4




Port Style Customer preference

Fluids Water or Mineral Oil Based Hydraulic Fluids, Formation Fluids, Drilling Mud

(Normally Closed) N.C.

(Normally Open) N.O.

PC

PC

PO

PO

Pilot Close (PC)

B

A

Pilot Open (PO)


Designed where space is a premium, and weight must be minimized, this pat-ent pending 3-way, 2-position valve offers flexibility in operation. With dual direction sealing technology, the normally open, normally closed and selector valve configurations are achieved by simply changing your inputs and outputs. Only one pocket is required for three valve configurations with this versatile technology.

Features & Benefits

• Variations allow for three different valve configurations, (NO, NC, Selec-tor) in the same pocket profile.

• Patent pending dual directional Key SealTM technology simplifies opera-tion

• Shear seal design allows use of debris laden fluids as a control medium• Can be field repaired resulting in reduced downtime• Cartridge mounted compact outer envelope allows for use in much small-

er modules• NACE MRO175 2009 compliance renders the valve useful in offshore

and subsea environments


Proserv Gilmore Shear Seal Control Valve: 3-way, 2 position


[email protected]



Pocket 1.375 OD x 4.5” Long

Flow Capacity Cv = .4





Fluids Water or Mineral Oil Based Hydraulic Fluids. Formation Fluids, Drilling Mud

PO

PC

F1

F2S

S

V

PO, PC

S, V, F

S, V, F

PO, PC

S, F

Building on our pedigree in wireline tool sampling valves and the proven line of Proserv Gilmore drilling control valves, we are pleased to introduce the Critical Service valve suite. Utilising our patent pending dual direction Key SealTM technology, we have developed a line of control valves for the harshest environments encountered in the oilfield. We push the envelope of higher pressures and temperatures while operating on clean and corrosive, debris laden fluids. Allow us to custom design a valve for your application.

By combining our drilling selector valve technology with the key seal, we have developed a compact cartridge or manifold mounted 4W 2P valve for low flow applications at higher temperatures and pressures. Available in hydraulic or mechanical actuation, this versatile platform can even be extended to a third position. Due to this unique design, the valve is non-interflow such that the functions never communicate. Patent pending plug and play technology allows for multiple configurations.

Features & Benefits

• The cartridge manifold mount allows for smaller modules• Gilmore’s Patent Pending Key SealTM technology allows for the use of

control fluids at elevated temperatures and pressures• Block before bleed design eliminates interflow• Can be field repaired to minimise downtime • Shear seal design allows for the use of debris laden control fluids• NACE MR0175


Proserv Gilmore Shear Seal Control Valve: 4-way, 2-position


[email protected]



Pocket 2.25 OD x 4.625 Long

Flow Capacity Cv = .035





Fluids Water or Mineral Oil Based Hydraulic Fluids. Debris tolerant

P2P1

F1 F2

S V

Pilot 2 (P2)

F1

F2

Pilot 1 (P1)S

Proserv Gilmore Valve’s Pressure Regulators are the ideal no-leakage solu-tion for maintaining and limiting downstream pressure. Hardened stainless steel hydro-seals are precision lapped to provide a durable positive seal and develop a wiping action that resists contamination.

With the Single Inlet regulator, we’ve taken proven Proserv Gilmore Valve technology and performance, and custom packaged it to suit a wide variety of offshore and subsea pressure regulator applications. Its high flow capacity design makes it well suited for many topside and subsea drilling and produc-tion control applications.

Features & Benefits

• Pressure gauge ports• Manual ball handle or Sealed Lock Nut• Actuation• Topside trim• Subsea trim• 1/2” to 1-1/2” regulated port• Tungsten carbide seal trim• Custom manifold mounting arrangements• Custom regulated pressure ranges• Custom materials


Proserv Gilmore Single Inlet Pressure Regulator


[email protected]




Regulated Pressure Ranges

Actuator Style FullOpenCv

Full Open PeakFlowCapacity


3,000 psi 3,000-3003,000-15001,500-750




API 16D

5,000 psi 5,000-3005,000-2,5003,000-1,5001,500-750


9.4 150 GPM NPT, SAE,Code 62, BSPP,Seal-Sub


API 16D

6,000 psi 6,000-3,0003,000-1,5001,500-750




API 16D

* Illustrated Regulator PN 45101: Commonly used subsea LMRP accumulator charge circuits which needs to be high capacity and capable of regulating a 6000 psi (absolute) supply pressure down to 5000 psi. The subsea trim includes stainless coil springs and spring housing, sealed lock nut on manually adjusted springs, stainless body and flanges.

RegulatedVent

Supply

Regulated

Vent

Supply

Proserv Gilmore 1-1/2” POCV Pilot Operated Check · PDF fileQualification API 16D Outlet...

Documents

Transcript of Proserv Gilmore 1-1/2” POCV Pilot Operated Check · PDF fileQualification API 16D Outlet...