Propeller - Knoll

Price ListMay 2021

Propeller

Table of Contents

Introduction Designer Index 3

Visual Index 3

Using the KnollStudio Price List 7

Intertek Clean Air Certified KnollStudio Products 8

Materials and Finishes 9

Product Maintenance 10

Placing Your KnollStudio Order 11

Propeller Collection Emanuela Frattini : Propellert Training Table Series 12

Emanuela Frattini : Propellert Column Base Tables 26

Emanuela Frattini : Propellert Conference Table Series 28

Emanuela Frattini : Propellert Accessories 72

Emanuela Frattini : Propellert Electrical 88

Selling Policy 141

General Ordering Information 143

KnollStudio Vol. Two

PLPROP05211

Copyright Q 2021 Knoll, Inc. All rights reserved.All prices effective 05/15/2021.

Designer Index

Emanuela Frattini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-27, 30-47, 50-87, 90-97, 100-107


2

Visual Index

Page PROPELLER COLLECTION

18 FRATTINI Propeller training rectangular and square

20 Propeller training semi-circular tables, bridge tops and segments

22 Propeller training rectangular tables with C-legs/T-legs

24 Propeller training flip-top tables with C-legs and T-legs

26 Propeller training rectangular folding tables and dolly

28 Propeller standing height tables and shelves

30 Propeller training column base tables

34 Propeller conference round and rounded tables with standard legs

36 Propeller conference bullet table with standard legs

38 Propeller conference square and rectangular conference tables with standard legs


3

Visual Index

Page PROPELLER COLLECTION, continued

40 FRATTINI Propeller conference segmented rounded and rectangular tables

54 Propeller conference tables with drum base

56 Propeller segmented conference tables with drum base

64 Propeller conference tables with peanut base

66 Propeller segmented conference tables with peanut base

76 Propeller accessories - fabric and tackable modesty and privacy screens

80 Propeller accessories - attachment clamps for modesty and privacy screens

82 Propeller accessories - tackable modesty screens for flip-top tables


4

Visual Index


84 FRATTINI Propeller accessories - credenzas and sideboards

86 Propeller accessories - replacement parts

88 Propeller accessories - Peanut and Drum base conference tables

94 Propeller electrical - Plexus boxes with cordset

96 Propeller electrical - Empty Plexus boxes

98 Propeller electrical - Pre-wired Plexus boxes

100 Propeller electrical - Quadruplex, and wire management

102 Propeller electrical - 2+2 Raceway components


5

Visual Index


106 FRATTINI Propeller electrical - Jumper and infeed cables

108 Propeller electrical - Leg options for Prewired Plexus boxes

110 Propeller electrical - Leg options for Empty Plexus boxes

112 Propeller electrical - Plexus Communication and Data Faceplates


6

Using the KnollStudio Price List

A Price List OverviewWhere do I send my order? Howshould I maintain my marble table?From textile options to woodpolishes, the KnollStudio price list isdesigned to provide you witheverything you need to know in orderto understand, specify, and care forfurniture in the KnollStudioCollection.

This book is divided into threeeasy-to-use sections.• Propeller Table Series• Pixel™ Tables Series• LSM Conference Tables

For a quick overview of thecollection’s scope, review the VisualIndex on pages 3-6. If you’re lookingfor pieces by a specific designer, trythe Designer Index on page 2.

FinishesFor detailed explanations of themany materials used in con-structing KnollStudio furniture,consult page 12. A cross-reference ofKnollStudio veneer or lumberfinishes with standard Knoll Officeveneers is provided on page 12.Easy-care maintenance informationis also provided on pages 13-14.

Placing Your KnollStudio OrderFor information about where to sendyour order and key terms andconditions, see page 14.The complete Knoll Selling Policy isavailable on pages 241-242.

General Ordering Information andKnoll’s Sustainability Statement isavailable on page 243

Product Information On Each PageOn each page, the following featureswill assist you:

Description provides both the patternnumber and a basic description ofthe product.

Dimensions provide the overall spacethe product will require. Statisticsare based on the maximum width,depth, andheight of the product.

Weight is based on the product itself.It does not include packaging.Weights are rounded to the nearestpound.

Weights of upholstered items do notinclude weight of textile/leather. Tocalculate total weight, multiplycovering requirements bytextile/leather weight, and add toproduct weight.

Pattern Number provides both theproduct identification number andall additional selections required forordering. Finish options are enclosedin parentheses. Finish suffixdescriptions are found underFinishes on the bottom portion of thepage.

Order Code/Ordering Informationoutlines exactly how to specifyKnollStudio product and the fullscope of finishes and other options.The Order Code provides an exampleof how one pattern number on thepage is specified.

Construction provides specificmaterials and finishes employed, aswell as specific construction details.

Note to Knoll Dealer Sellers:The products contained in this pricelist are also available through theKnoll Essentials program, withlimited exceptions. For additionalinformation, please contact yourcustomer service representative orvisit Knoll Exchange.

For More InformationFor more information, contactyour KnollStudio representative,a Knoll Space reailer or e-tailer, ortelephone Customer Services at800 343-KNOLL. To find the retaileror showroom nearest you, visitwww.knoll.com.


7

Intertek Clean Air Certified KnollStudio Products

Intertek Clean Air Certification

Intertek’s Clean Air Certification validtes the level of volatile organic compound (VOC) emissions from products. VOCs are gases emitted from products andinclude a variety of chemicals that may effect consumers’ health in the short- and long-term. Both Intertek Clean Air GOLD and SILVER certifications ensurethe user-health, safety and sustainability of Knoll products. A selection of Knoll Office and KnollStudio products are Intertek certified Clean Air, most of whichare certified GOLD, which imposes more rigorous standards than certified SILVER.

• USGBC LEED credits• California 01350 Special Environmental Requirements (CDPH)• California Department of General Service (DGS) Indoor Air Quality Specifications for Open Panel Office Furniture• Compliant to BIFMA e3 standard credit 7.6.2 and 7.6.3


8

Materials and Finishes

KnollStudio Natural MaterialsWood and marble are naturalmaterials that vary. Use materialsamples and printed samplematerials as reference only.KnollStudio printed and finishsamples offer an example of what an‘‘average’’ natural material may looklike, within a range of acceptancecarefully delineated by Knoll.Because of the breadth of variationspossible with any natural material,Knoll specialists select thesematerials with stringent criteria,accepting only the top 3 - 5% of whatis available.

Wood

Knoll Natural VeneersAll natural finishes are selected fromthe finest hardwoods available aroundthe world. Veneers are flat cut andcarefully matched so that cathedral orheart patterns are perfectly balanced.Natural veneers also are cut to allow agenerous margin of quarter-grainfiguring ensuring invisible splicing.

Quarter CathedralPattern Pattern

MarbleKnoll selects the highest quality,structurally sound marble through ahost of quarries in the United States,Turkey, Spain, Slovenia and Italy.Because each mountain range andquarry have their own signature,every marble piece - even within asingle quarry - is unique. Hues,veins, crystals, fossils, clouds, anddistinctive marks will vary frompiece to piece. This is theextraordinary character of stoneas a material. Its high quality and itsunique nature give the Knoll tables afeel of incredible sculptural beauty.The following are the marbles thatKnollStudio offers:

Coated MarblesCoated MarblesCoated marbles have transparent,high-polish, polyester coating toprevent use-associated stains. Evenwith this protection, coated marblesshould not be used outdoors. Stainsshould be wiped immediately.Coating will yellow over time.

Satin Coated MarbleSatin coated marbles havetransparent satin polyester coating toprevent use-associated stains. Thissatin finish gives the stone a natural,honed appearance while providingthe same protective qualities as theCoated Marbles. Even with thisprotection, satin coated marblesshould not be used outdoors. Stainsshould be wiped immediately.Coating will yellow over time.

ArabescatoIvory white with dark grey veining.May contain random green veins.

CalacattaIvory white. Gold and beige randomveins with additional veins varyingfrom cream to green and grey.

Grey MarbleGrey with black and white veins.Hues vary in tone and intensity.

Man-Made Materials & FinishesStainless SteelCompletely rust-proof, highlydurable, and resistant to bendingstress.

Polished ChromeSeveral-step plating process thatincludes a heavy layer of nickel foradded rust protection and a brightmirror finish.

Satin ChromeChrome plating applied for a softsatinized chrome finish with a highernickel content.

Polished AluminumA shiny, polished finish.

Clear Anodized AluminumA light grey satin finish.

LaminateAn exceptionally durable plasticsurface. Highly resistant to mostchemicals and extensive wear.

Vetro Bianco:Vetro Bianco is an engineered resinfree quartz surface. The brilliantwhite surface is nonporous, stainproof, and extremely durable makingit suitable for indoor and outdoor use.


9

Product Maintenance

With proper care, your KnollStudiofurniture should last for years tocome. To help ensure the longevity ofyour purchase, below are helpful hintson routine cleaning for yourKnollStudio piece. Most basicmaintenance can be performed withcommon household cleaningproducts.

WoodClean with a commercial brandof liquid furniture polish twicea month. For stubborn dirt or lightscratches, rub lightly with very finesteel wool before using furniturepolish. Steel wool Grade #0000 isrecommended. To rejuvenate luster,apply a furniture cream as a laststep. Do not use water or householdsolvents: they will destroy theprotective finish.

Marble with Polyester CoatingWash with lukewarm water. Washmore thoroughly with Windex,Fantastik, Ivory Flakes in warmwater, or other non-abrasivesolutions. Rinse with warm water anddry with a soft cloth.

Vetro BiancoWash surface with lukewarm water.Clean more thoroughly with anon-abrasive solution such asWindex or Fantastik. Rinse withwarm water and dry with a soft cloth.Wipe off stains immediately withwater and a soft cloth. Never usesteel wool or other abrasives onsurface.

Glass/Acrylic PolycarbonateClean with Windex, Fantastikor other non-abrasive cleaningsolutions. Wipe dry with aclean cloth.

Laminate/MelamineScrub with Windex, Fantastik, Mr.Clean, or other household soaps ordetergents well dissolved in water, orwith a very soft cloth dampened withalcohol or a synthetic thinner. For adull finish, rub with jeweler’s rougeas a polishing agent and finish withpaste wax. Never use abrasives.Remove stubborn stains with SoftScrub.

Stainless SteelUse Windex, Fantastik, or othernon-abrasive household cleaners.For small scratches, rub with Comet,Ajax, or other mild abrasives in thedirection of the grain. Apply a coat ofauto wax to maintain beauty.

Chrome/Satin ChromeClean with Windex or an automotivechrome cleaner such asSemi-Chrome twice a month. Apply acoat of hard paste wax to protectagainst moisture.

Polished AluminumClean with Windex, Fantastik, orother non-abrasive cleaningsolutions. Coat with a hard paste waxsemi-annually to maintain luster andprevent discoloration.

Anodized AluminumClean with mild soaps, detergents, orother non-abrasive cleaning agents.Apply paste wax or DuPontnon-abrasive car polish #7 twice ayear to prevent oxidation.

For stubborn stains or discolor-ations, apply navel jelly aluminumcleaner.

Urethane EdgeClean with household soaps anddetergents well dissolved in water.Do not use abrasive cleaningsolutions.

Powder Coat PaintClean with Windex or Endust using asoft cloth. Remove stubborn stainswith Soft Scrub.


10

Placing Your KnollStudio Order

Use the Following Address:If you would like to send an orderdirectly to our order entrydepartments, please use thefollowing address:

Knoll, Inc.P.O. Box 157East Greenville, PA 18041Attn: Order Entry

Fax: 215 679-1570Tel: 800 343-KNOLL

When Placing Your Order, Include:

• All information requested on theorder form.

• Local taxes for the ‘‘delivered to’’address.

• For orders $2,000 or under(including applicable taxes anddelivery/installation fees, if any),full payment must be made whenorder is placed.

• For orders over $2,000, a depositequal to one-half of the completeorder value is required at orderplacement. Balance must besettled before shipment.

Key Points to Remember:All accepted orders will beconfirmed in writing on the Knollstandard acknowledgement form. Acopy of the acknowledgement will bemailed to the customer prior toproduction.

Freight within the 48 contiguousUnited States and Canada, excludingthe Yukon, Northwest Territories andNewfoundland, is prepaid andincluded in the price of all orders.

For residential orders, Knoll stronglyrecommends WhiteGlove delivery service to mostlocations in the Continental UnitedStates and Canada. White Gloveservice includes inside delivery,unpacking, furniture installation andremoving cartons and crates. The feefor this service will be quoted at thepoint of purchase.

KnollStudio’s limited warranty coversall furniture against manufacturingdefects in this price list for a periodof five years after delivery to thecustomer.

All pricing is in U.S. dollars.

For More Information:For complete Knoll Selling Policyand warranty information, pleaserefer to pages 241-242 in the back ofthis price list.

For additional informationon KnollStudio, contact yourKnollStudio representative, a KnollSpace retailer or e-tailer, ortelephone Customer Services at800 343-KNOLL. To find the retaileror showroom nearest you, visitwww.knoll.com.


11

Emanuela FrattiniPropellert Training Table SeriesConfigurations and Product Information

Below are only a few examples of suggested configurations using PropellerTraining tables, bridge tops, segments and screens.

All connections are tool-free and can be made by the user. To gang tables,connectors can be simply removed from the integral storage port in the leg.When tables are hard wired a screwdriver is needed.

The inherent flexibility of Propeller tables allows for diverse applications,ranging from setups for conference rooms to private offices and workstations.

Ordering Information

Specify:1. Pattern number2. Top finish selection3. Caster or glide selection

(table only)4. Edgeband selection5. Grommet option

(table and bridge only)6. Leg/grommet finish

Shipping:Tops and legs are shippedseparately. Legs shipknocked-down: foot plate andvertical component. Simple fieldassembly required.

Scope

Product scope:

P2-F Folding tableP2-M Semi-round tableP2-R Rectangular tableP2-S SegmentP2-V Rectangular bridgeP6-C Flip Top tableP8-C Adjustable Height table

Electrical options:Please see Propeller Electricalsection for product and specificationdetails.

Construction

Top:1 3/169 thick; 3-ply, solid-coreconstruction. Plastic laminate topand backer sheet on bottom.Threaded inserts are die-cast zinc.

Edges:All table edges are finished,allowing ganged tables to beseparated and used individually.Flat ABS edgeband, moldedurethane edge and solid wood edgeare available.

Molded edge detail:Molded, seamless urethane edgewith integral color.

Flat edgeband:ABS flat edgeband, with integralcolor.

1/49 edge detail:Solid wood

Grommet option:Individual table segments may bespecified with zero, one, or twogrommets, located at mid-depth orfront edge locations. All grommetsare 3 1/49 diameter. Optionalgrommet-mounted powerreceptacles available.

Grommet liners are black injectionmolded ABS plastic. Yin-yanggrommet cap is textured, die-castaluminum with powder-coat finish.

Legs:Propeller’s S-shaped training legincorporates two separate channelsfor power and communicationswiring. Cables are laid behindflipper strips. Vertical leg isextruded aluminum constructionwith clear satin anodized or powdercoat finish. There are three types ofPropeller training legs:

Standard Training leg section:

Standard Training leg: verticalextrusion is 3 3/49w x 1 5/89d. Leg endcaps are injection-molded,glass-filled nylon. Leg mountingplates are aluminum die-castingswith integral storage port in atextured paint finish.

C-leg and T-legs:C-leg and T-leg offer additionalkneespace. Vertical extrusion is 59wx 2 1/49d, same profile as conferenceleg. Cast aluminum end plates withtextured paint finish. Castaluminum foot in textured metallicpowder coat.

Glides/casters:Glides and locking casters-blacknylon.C-Leg has low glide at front andhigh glide in the back.T-Leg has two low glides.

Connector plates:Aluminum die-casting with texturedpaint finish. Integral storage port forconnecting tables.

Connector bars:Bar and latch are made of cast alloywith tumble-bead finish. Button isinjection-molded red ABS plastic.Spring and back plate are steelstampings.


12 13

Emanuela FrattiniPropellert Training Table SeriesRectangular and Square Tables

Designer(s):Emanuela Frattini, 1994

description w d h

clearance

between legs

w

clearance

between legs

d

table weight

(lbs.) pattern no.

laminate/

flat edge

laminate /

molded edge

veneer/

flat edge veneer/wood edge

P2-R Rectangular table 489 189 28 1/29 409 7 3/49 44 P2-R02 * $1,248. $1,537. $3,651. $4,352.

609 189 28 1/29 529 7 3/49 55 P2-R04 * $1,387. $1,705. $3,735. $4,434.

729 189 28 1/29 649 7 3/49 62 P2-R06 * $1,502. $1,847. $3,791. $4,501.

369 249 28 1/29 289 13 3/49 50 P2-R10 * $1,320. $1,823. $3,648. $4,352.

489 249 28 1/29 409 13 3/49 54 P2-R12 * $1,550. $1,905. $3,723. $4,442.

609 249 28 1/29 529 13 3/49 63 P2-R14 $1,709. $2,104. $3,796. $4,522.

729 249 28 1/29 649 13 3/49 73 P2-R16 $1,876. $2,307. $3,879. $4,609.

429 309 28 1/29 349 19 3/49 57 P2-R21 * $1,632. $2,004. $3,761. $4,473.

489 309 28 1/29 409 19 3/49 63 P2-R22 * $1,709. $2,104. $3,791. $4,522.

609 309 28 1/29 529 19 3/49 75 P2-R24 $1,876. $2,307. $3,903. $4,651.

669 309 28 1/29 589 19 3/49 81 P2-R25 $1,957. $2,406. $3,945. $4,689.

729 309 28 1/29 649 19 3/49 87 P2-R26 $2,037. $2,506. $3,977. $4,731.

489 369 28 1/29 529 25 3/49 73 P2-R32 * $1,876. $2,307. $3,871. $4,609.

609 369 28 1/29 529 25 3/49 87 P2-R34 $2,037. $2,506. $3,975. $4,731.

729 369 28 1/29 649 25 3/49 101 P2-R36 $2,200. $2,706. $4,087. $4,857.

P2-N Square table 369 369 28 1/29 59 P2-N30 * $1,709. $2,104. $3,095. $4,144.

429 429 28 1/29 75 P2-N41 * $1,876. $2,307. $3,359. $4,434.

489 489 28 1/29 94 P2-N52 $2,037. $2,506. $3,384. $4,501.

Order Code

Example: P2-R24-G-PA-6-Y-111P2-R24 309 x 609 rectangle

G Glides

PA Pearwood laminate

6 Black molded edgeband

Y No grommet

111 Jet Black legs

Specify:

1. Pattern number2. Locking caster or glide selection3. Top finish selection4. Edgeband selection5. Grommet, Plexus or Transact option6. Leg/grommet finish

Finishes

Woodgrain laminate top finishes:Light Ash (suffix 139)Warm Ash (suffix 140)Whitened Ash (suffix 141)Grey Ash (suffix 142)Classic Oak (suffix 143)Graphite Pear (suffix 144)Zebra (suffix 145)Medium Cherry (suffix 124)Natural Maple (suffix 125)Natural Cherry (suffix 126)Walnut (suffix 127)

Solid laminate top finishes:Bright White (suffix 118)Brushed Sand (suffix 122)Folkstone Grey (suffix 114)Jet Black (suffix 111)Micro Grey (suffix 121)

Veneer top/edge finishes:Brown Oak (suffix V427)Burnt Walnut (suffix V313)Chalk Oak (suffix V421)Ebonized Walnut (suffix D)Graphite Oak (suffix V513)Light Oak (suffix V423)Maple (suffix K)Natural Beech (suffix B)Old English Walnut (suffix V417)Warm Brown Walnut (suffix J)American Walnut (suffix AW)Natural Oak (suffix ON)Fumed Oak (suffix OF)Ebonized Oak (suffix OE)

Flat edgeband finishes:Black (suffix 111)Mink (suffix 324)Innertone (suffix 386)Platinum (suffix 367)Folkstone (suffix 004)Bright White (suffix 118)

Molded edgeband finishes:Black (suffix 300M)Mink (suffix 324M)Innertone (suffix 386M)Platinum (suffix 367M)Folkstone (suffix 004M)Light Grey (suffix 4M)Medium Grey (suffix 5M)

Leg and grommet finishes:Anodized Aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 612)Bright White (suffix 118)

Glides/Casters:Glides (suffix G)Locking Casters (suffix C)

Electrical

Grommet Options: ($34 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49diameter. Optional grommet-mountedpower receptacles available, see page100.

No grommet (suffix Y)Single grommet, left, mid-depth (BG)Two grommets, left & right, front (DR),(DL), (DG)Two grommets, left & right, mid-depth(AG)Single grommet, center, front (ER), (EL),(EG)Single grommet, center, right (HG)Single grommet, center (P2-N) (GG)* AG, BG not available on 189 deeptables

Sequence Options: ($34 per cutout)Tables may be specified with zero, one ortwo cutouts. All sequence cutouts are 21/29 x 69. Sequence is available on 249

and 309 deep Rectangular tables only.369, 429 and 489 wide tables, ES locationonly; 729 wide tables, DS location only.

No Sequence (Y)Single Sequence, center, front (ES)Two Sequence, left & right, front (DS)

Small Plexus Options: ($34 per cutout)Tables may be specified with zero, one ortwo cutouts. All small Plexus cutouts are6 7/89-6 1/49. Small Plexus is available on249 and 309 tables only. 369, 429, 489

and 609 wide tables, ES location only.

No Small Plexus (Y)Single Small Plexus, center, front (ESP)Two Small Plexus, right & left, front(DSP)

Plexus options: ($34 per cutout)* Plexus box not availableFor no Plexus (Y)For medium Plexus, center, mid-depth(GM)For medium Plexus, left & right,mid-depth (AM)For medium Plexus, center, front (EM),(DR), (DL)For medium Plexus, left & right, front(DM), (ER), (EL)For medium Plexus, center (P2-N) (GM)

+ For more detailed information, consultthe Electrical section of the PropellerManual.

Features

Connecting tables:Each rectangular table includes twoconnector bars to connect rectangulartops to each other on any side. When notneeded, connectors store in ports at topof table leg.

Maintenance:See pages 10.

Note:Propeller tables are certified Clean AirGOLD.

Square Tables:Square tables have four legs withrectangular table end plates. Twoconnector bars per table. Square tablesgang on all four sides to training tables ofsame width.


14 15

Emanuela FrattiniPropellert Training Table SeriesSemi-Circular Tables, Bridge Tops and Segments


description w d h

clearance

between legs

table weight

(lbs.) pattern no.

laminate/

flat edge

laminate/

molded edge

veneer/


P2-M Semi-circular table - three legs 489 249 28 1/29 35 1/29 51 P2-M10 $1,467. $1,805. $3,214. $5,038.

609 309 28 1/29 51 1/29 62 P2-M20 $1,632. $2,004. $3,593. $5,673.

729 369 28 1/29 63 1/29 81 P2-M30 $1,794. $2,206. $3,981. $6,316.

P2-S Bridging segment 90° - no legs 90° 249 2 5/89 P2-S92 $809. $993. $1,588. $2,569.

90° 309 2 5/89 P2-S94 $891. $1,092. $1,716. $2,784.

90° 369 2 5/89 P2-S96 $969. $1,192. $1,849. $2,997.

Order Code

Example: P2-M20-C-SL-4-AP2-M20 609 wide semi-circular table

C Locking casters

SL Slate laminate

4 Light Grey edgeband

A Anodized Aluminum legs

Specify:

1. Pattern number2. Locking caster or glide selection3. Top finish selection4. Edgeband selection5. Grommet or Plexus option6. Grommet/leg finish

Finishes:Colored laminate finishes:Bright White (suffix 118)Brushed Aluminum (suffix LJ)Brushed Sand (suffix 122)Fog (suffix 128)Folkstone Grey (suffix 114)Jet Black (suffix 111)Light Grey (suffix L)Micro Grey (suffix 121)Micro Sand (suffix 129)Pumice (suffix 119)Slate (suffix SL)Soft Grey (suffix 117)

Finishes








Electrical


Grommet Option: (rectangular bridge toponly): ($34 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49 indiameter. Optional grommet-mountedpower receptacles available, see page100.

Grommet options:No grommet (Y)Two grommets, left and right, mid-depth(AG)Single grommet, left, mid-depth (BG)Two grommets, left and right, front (DG)Single grommet, center, front (EG)* AG, BG not available on 189 deeptables

Plexus Options: ($34 per coutout)* Plexus box not availableFor no Plexus box (Y)For medium Plexus, center, mid-depth(GM)For medium Plexus, left & right,mid-depth (AM)For medium Plexus, center, front (EM)For medium Plexus, left & right, front(DM)

Note:Cutouts not available onSemi-Circular Tables.

Semi-Circular Tables:Semi-circular tables have three legs formaximum leg space. Use 180° tablesfree-standing or connected to othertables. 180° tables connect torectangular tables of same width or torectangular tables in a back-to-backconfiguration. Connect twosemi-circular tables to create a largeround table.

Bridge tops have a weight capacity of300 pounds.

Configurations:

with rectangular table/bridge top

with rectangular tables back-to-back two180° tables

Features

Stacking:Semi-circular tables and square tablesdo not stack. Bridge tops can be stackedten high on table dolly (see page 26).

Shipping:Propeller tables shipped knocked-down.Simple field assembly required.




16 17

Emanuela FrattiniPropellert Training Table SeriesRectangular Tables with C-Legs and T-Legs


description w d h leg type

clearance

between legs

table weight

(lbs.) pattern no.

laminate/

flat edge

laminate/

molded edge

veneer/


P2-C Rectangular table with C-Legs/T-Legs 489 189 28 1/29 C-Legs 34 1/29 50 P2-C02 * $1,817. $2,286. $4,211. $4,950.

609 189 28 1/29 C-Legs 46 1/29 53 P2-C04 * $1,831. $2,347. $4,305. $5,027.

729 189 28 1/29 C-Legs 58 1/29 55 P2-C06 * $1,880. $2,412. $4,356. $5,096.

369 249 28 1/29 C-Legs 22 1/29 60 P2-C10 * $2,110. $2,600. $4,215. $4,950.

489 249 28 1/29 C-Legs 349 67 P2-C12 * $2,118. $2,605. $4,513. $5,270.

489 249 28 1/29 T-Legs 349 67 P2-C13 $2,268. $2,786. $4,694. $5,324.

609 249 28 1/29 C-Legs 46 1/29 76 P2-C14 $2,286. $2,811. $4,591. $5,349.

609 249 28 1/29 T-Legs 46 1/29 76 P2-C15 $2,446. $3,008. $4,775. $5,404.

729 249 28 1/29 C-Legs 58 1/29 86 P2-C16 $2,449. $3,012. $4,672. $5,438.

729 249 28 1/29 T-Legs 58 1/29 86 P2-C17 $2,619. $3,223. $4,857. $5,493.

429 309 28 1/29 C-Legs 29 1/29 70 P2-C21 * $2,200. $2,706. $4,552. $5,298.

489 309 28 1/29 C-Legs 34 1/29 76 P2-C22 * $2,286. $2,811. $4,584. $5,349.

489 309 28 1/29 T-Legs 34 1/29 76 P2-C23 * $2,459. $2,991. $4,768. $5,546.

609 309 28 1/29 C-Legs 46 1/29 82 P2-C24 $2,449. $3,012. $4,698. $5,478.

609 309 28 1/29 T-Legs 46 1/29 82 P2-C27 $2,625. $3,194. $4,886. $5,674.

669 309 28 1/29 C-Legs 52 1/29 88 P2-C25 $2,529. $3,110. $4,737. $5,518.

669 309 28 1/29 T-Legs 52 1/29 88 P2-C28 $2,703. $3,295. $4,925. $5,714.

729 309 28 1/29 C-Legs 58 1/29 100 P2-C26 $2,607. $3,210. $4,768. $5,556.

729 309 28 1/29 T-Legs 58 1/29 100 P2-C29 $2,785. $3,246. $4,958. $5,508.

489 369 28 1/29 T-Legs 34 3/49 95 P2-C32 * $2,653. $3,012. $4,843. $5,634.

609 369 28 1/29 T-Legs 43 3/49 109 P2-C34 $2,738. $3,210. $4,954. $5,754.

729 369 28 1/29 T-Legs 52 3/49 123 P2-C36 $2,829. $3,410. $5,064. $5,882.

Order Code

Example: P2-C26-PA-R5-EG-612P2-C26 729 x 309 rectangular

training table with C-Legs


R5 Black edgeband

EG Single grommet, center,front

612 Medium Metallic Grey legs

Specify:

1. Pattern number2. Top finish selection3. Edgeband selection4. Grommet or Plexus option5. Leg/grommet finish

Finishes








Features

C-Leg tables/T-Leg tables:C-Leg and T-Leg tables combinePropeller table features with more legspace. Tables have either two C-Legs ortwo T-Legs. 249d and 309d training tablesC-Legs are mounted to the rear. T-Legsare centered. All legs are positioned at3 7/89 from table edge on the depth side.Tables have identical wire managementand ganging capabilities as standardtraining tables.

Note:C-Leg and T-Leg tables are availablewith glides only.



Connecting tables:Each rectangular table includes fourconnector plates and two connector barsto connect rectangular tables to eachother on any side. When not needed,connectors may be stored in additionalblack plastic storage port attachedunderneath table tops.

Electrical

Grommet Options: ($34 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49 indiameter. Optional grommet-mountedpower receptacles available, see page100.

No grommet (suffix Y)Single grommet, left, mid-depth (BG)Two grommets, left & right, front(DR), (DL), (DG)Two grommets, left & right, mid-depth(AG)Single grommet, center, front (ER), (EL),(EG)Single grommet, center, right (HG)* AG, BG not available on 189 deeptables


and 309 deep Rectangular C-leg tablesonly. 369, 429 and 489 wide tables, ESlocation only; 729 wide tables, DSlocation only.


Small Plexus Options: ($34 per cutout)Tables may be specified with zero, one ortwo cutouts. All small Plexus cutouts are6 7/89-6 1/49. Small Plexus is available on249 and 309 tables only. 369, 429, 489

and 609 wide tables, ES location only.


Plexus options: ($34 per cutout)*Plexus Box not availableFor no Plexus (Y)For medium Plexus, center, mid-depth(GM)For medium Plexus, left & right,mid-depth (AM)For medium Plexus, center, front (EM),(DR), (DL)For medium Plexus, left & right,front (DM), (ER), (EL)


18 19

Emanuela FrattiniPropellert Training Table SeriesFlip-Top Tables with C-Legs and T-Legs


description w d h leg type

table weight

(lbs.) pattern no.

laminate/

flat edge

laminate/

molded edge

veneer/


P6-C Rectangular flip-top table withC-Legs/T-Legs

489 189 299 C-Legs 71 P6-C02 $2,046. $2,513. $4,821. $5,588.

609 189 299 C-Legs 82 P6-C04 $2,188. $2,693. $5,009. $5,762.

72 189 299 C-Legs 91 P6-C06 $2,314. $2,841. $5,095. $5,866.

489 249 299 C-Legs 73 P6-C12 $3,037. $3,566. $5,347. $6,137.

609 249 299 C-Legs 84 P6-C14 $3,201. $3,717. $5,470. $6,272.

729 249 299 C-Legs 96 P6-C16 $3,358. $3,852. $5,546. $6,352.

489 309 299 C-Legs 83 P6-C22 $3,184. $3,666. $5,368. $6,169.

609 309 299 C-Legs 97 P6-C24 $3,373. $3,829. $5,594. $6,418.

729 309 299 C-Legs 111 P6-C26 $3,496. $3,981. $5,711. $6,541.

489 369 299 T-Legs 95 P6-C32 $3,342. $3,841. $5,579. $6,394.

609 369 299 T-Legs 112 P6-C34 $3,551. $4,008. $5,727. $6,562.

729 369 299 T-Legs 126 P6-C36 $3,838. $4,162. $5,780. $6,624.

Order Code

Example: P6-C26-PA-R6-EG-AP6-C26 729 x 309 flip-top with

C-legs


R6 Medium Grey edgeband

EG Single grommet, centerback

A Anodized Aluminumgrommet and legs

Specify:

1. Pattern number2. Top finish selection3. Edgeband selection4. Grommet or Plexus option5. Leg/grommet finish



Finishes





Electrical


Grommet Options: ($34 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49diameter. Optional grommet-mountedpower receptacles available, see page100.

No grommet (Y)Single grommet, left, mid-depth (BG)Two grommets, left and right, front (DG)Two grommets, left and right, mid-depth(AG)Single grommet, center, front (EG)Singel grommet, center (GG)* AG, BG not available on 189 deeptables


and 309 deep Rectangular flip-top tableswith C-leg. 489 wide tables, ES locationonly; 729 wide tables, DS location only.


Small Plexus Options: ($34 per cutout)Tables may be specified with zero, one ortwo cutouts. All small Plexus cutouts are6 7/89-6 1/49. Small Plexus is available on249 and 309 tables only. 369, 429, 489 and609 wide tables, ESP location only.


Plexus options: ($34 per cutout)* Plexus Box not availableNo Plexus (Y)Single medium Plexus, center (GM)Two medium Plexus, left and right,mid-depth (AM)

Features:

Note:- Rectangular Fliptop tables can bespecified with medium cordset Plexus orTransact- Plexus options not available for 489

wide tables- Plexus options for 609 and 729 widetables: (GM, AM)



Maintenance:See pages10

C-Leg/T-Leg Flip-Top RectangularTables:249d and 309d tables have C-Legsmounted to the rear, 369d flip-top tableshave centered T-Legs. Legs arepositioned at 2 7/89 from table edge on thedepth side. Flip-Top tables can beganged side to side or front to back toother flip-top or standard tables.

Note:Flip-Top tables are available withlocking casters only.

Flip Mechanism:The Flip mechanism consists of blacknylon glass-filled housing on both theC-Leg/T-Leg and the column base tables.The cross-member on rectangular tablesis an aluminum extrusion that isanodized or painted to match thePropeller C-Leg/T-Leg. To operate,simply depress the mechanism to lowerthe table; to raise the table, lift themechanism towards the table top.Flip-Top mechanism is pneumatic andeasy to operate with one hand.

Wire management:Vertical extrusion of C-Legs and T-Legsis 59w x 2 1/49 – same profile asconference leg profile. In horizontalposition, Quadruplex monument orshallow plug in Plexus boxes can beused.

Nesting:Flip-Top tables nest easily for compactstorage. C-Leg and T-Leg Flip Tops allowthe top to flip and nest as well asproviding more leg space than a standardfolding table. When nested, the tablesare staggered. There is no limit to thenumber of tables that can be nestedtogether.

Example:Footprint area guideline C-Leg489 x 249 C-Leg- Two 489 x 249 C-Leg tables flipped andnested measure 519 x 30 1/29- Three 489 x 249 C-Leg tables flippedand nested measure 549 x 38 1/29- Six 489 x 249 C-Leg tables flipped andnested measure 639 x 639

609 x 309 C-Leg- Two 609 x 309 C-Leg tables flipped andnested measure 639 x 30 1/29- Three 609 x 309 C-Leg tables flippedand nested measure 669 x 38 1/29- Six 609 x 309 C-Leg tables flipped andnested measure 759 x 639

729 x 369 T-LegFootprint area guideline T-Leg- Two 729 x 369 T-Leg tables flipped andnested measure 759 x 429

- Three 729 x 369 T-Leg tables flippedand nested measure 789 x 49 1/29- Six 729 x 369 T-Leg tables flipped andnested measure 879 x 729

Shipping:C-Leg/T-Leg Flip-Top tables are shippedknocked down. The table top, flipmechanism, aluminum cross-member,and leg kit areall shipped in separate boxes. Simplefield assembly required.

Nesting Diagrams Guideline:


20 21

Emanuela FrattiniPropellert Training Table SeriesRectangular Folding Tables and Dolly


description w d h

clearance

between legs

w

clearance

between legs

d

table weight

(lbs.) pattern no. table dolly

laminate/

flat edge

laminate/

molded edge

veneer/


P2-F Folding table 609 249 28 1/29 529 13 3/49 72 P2-F14 $2,200. $2,706. $4,775. $5,562.

729 249 28 1/29 649 13 3/49 81 P2-F16 $2,367. $2,905. $4,850. $5,656.

609 309 28 1/29 529 19 3/49 83 P2-F24 $2,367. $2,905. $4,899. $5,718.

669 309 28 1/29 589 19 3/49 89 P2-F25 $2,449. $3,012. $4,941. $5,758.

729 309 28 1/29 649 19 3/49 95 P2-F26 $2,529. $3,110. $4,973. $5,799.

609 369 28 1/29 529 25 3/49 95 P2-F34 $2,529. $3,110. $4,995. $5,829.

729 369 28 1/29 649 25 3/49 109 P2-F36 $2,693. $3,308. $5,107. $5,955.

P2-DOLLY Table dolly with one handle 609 309 32 1/49 P2-DOLLY24 $1,739.

729 309 32 1/49 P2-DOLLY26 $1,943.

609 369 32 1/49 P2-DOLLY34 $1,943.

729 369 32 1/49 P2-DOLLY36 $2,144.

P2-DOLLY-H Additional handle for tabledolly

P2-DOLLY-H $777.

Order Code

Example: P2-F16-G-129-R6-Y-612P2-F16 249 x 729 rectangle folding

table

G Glides

129 Micro Sand laminate


Y No grommet

612 Medium Metallic Grey legs

Specify:

1. Pattern number2. Locking caster or glide selection3. Top finish selection4. Edgeband selection5. Grommet option6. Leg/grommet finish

Finishes








Electrical


Grommet options: ($34 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49diameter . Optional grommet mountedpower receptacles available, see page100.

No grommet (suffix Y)Single grommet, left, mid-depth (BG)Two grommets, left and right, front (DG)Two grommets, left and right, mid-depth(AG)Single grommet, center, front (EG)Single grommet, center, right (HG)

Features

Connecting tables:Each folding table, includes twoconnector bars to connect rectangulartops to each other on any side. When notneeded, connectors store in ports at topof table leg.

Table dollies:Table dollies can stack 5 folding tables.Red urethane edge is scuff resistant,bottom is medium grey laminate, handleis stainless steel. Wheels areself-lubricating steel bearings withpuncture-proof and impact-resistantsolid cushion tires, mounted on apolypropylene hub.

Note:Height of Propeller table folded is 4 1/49.




22 23

Emanuela FrattiniPropellert Training Table SeriesStanding Height Tables


description w d h

clearance

between legs

w

clearance

between legs

d

table weight

(lbs.) pattern no. shelf

laminate/

flat edge

laminate/

molded edge

veneer/


P2-H Standing height table 489 249 389 409 13 3/49 66 P2-H12 * $1,709. $2,104. $4,156. $4,897.

609 249 389 529 13 3/49 75 P2-H14 $1,876. $2,307. $4,231. $4,976.

729 249 389 649 13 3/49 85 P2-H16 $2,037. $2,506. $4,316. $5,064.

489 309 389 409 19 3/49 75 P2-H22 * $1,876. $2,307. $4,245. $4,995.

609 309 389 529 19 3/49 87 P2-H24 $2,037. $2,506. $4,356. $5,126.

729 309 389 649 19 3/49 99 P2-H26 $2,200. $2,706. $4,434. $5,207.

489 369 389 409 25 3/49 85 P2-H32 * $2,037. $2,506. $4,522. $5,292.

609 369 389 529 25 3/49 99 P2-H34 $2,200. $2,706. $4,624. $5,410.

729 369 389 649 25 3/49 113 P2-H36 $2,367. $2,780. $4,733. $5,298.

Order Code

Example: P2-H26-G-111-5-AG-612P2-H26 729 x 309 standing height

table

G Glides

111 Jet Black laminate

5 Medium Grey edgeband

AG 2 grommets, mid-depth

612 Medium Metallic Greygrommets and legs

Example: P2-K26-AP2-K26 Shelf for 729 x 309 standing

height table

A Aluminum shelf finish

Specify:

1. Pattern number2. Locking caster or glide selection3. Top finish selection4. Edgeband selection5. Grommet/Plexus option6. Grommet and leg finish

Specify shelf:7. Pattern number8. Shelf finish

Finishes








Electrical


Grommet options: ($34 per cutout)Tables may be specified with zero, one,or two grommets. All grommets are 3 1/49diameter. Optional grommet mountedpower receptacles available, see page100.

No grommet (Y)Single grommet, left, mid-depth (BG)Two grommets, left and right, front (DG)Two grommets, left and right, mid-depth(AG)Single grommet, center, front (EG)* AG, BG not available on 489 widetables

Plexus options: ($34 per cutout)* Plexus Box not availableFor no Plexus (Y)For medium Plexus, center, mid-depth(GM)For medium Plexus, left & right,mid-depth (AM)For medium Plexus, center, front (EM)For medium Plexus, left & right, front(DM)* AM, DM available for 729 wide tablesonly

Features

Standing height tables:Use Standing Height Tablesfree-standing or connected to otherStanding Height Tables. Two connectorsprovided with tables.

Legs:Extruded aluminum construction withclear satin anodized finishor powder-coat finish. Wire managementflipper strips are flexible PVC. Leg endcaps are injection-molded, glass-fillednylon. Leg mounting plates arealuminum die-castings with a texturedpaint finish. Black ribbed nylon glide orblack nylon caster.




24 25

GG

Y

Emanuela FrattiniPropellert Column Base TablesRound and Square Tables


description w d h weight base pattern no.

laminate/

flat edge

laminate/

molded edge

laminate/1/29 wood edge

veneer/

flat edge

veneer/1/49 wood edge

P2-Y Propeller round column base table 429 28 1/29 71 4-star P2-Y42 $2,036. $2,342. $4,320. $6,161.

489 28 1/29 85 4-star P2-Y48 $2,056. $2,352. $4,427. $6,259.

P3-J Propeller round column base table 429 28 1/29 71 4-star P3-J42 $5,353.

489 28 1/29 85 4-star P3-J48 $5,549.

P2-X Propeller square column base table 309 309 28 1/29 53 4-star P2-X30 $1,569. $1,928. $3,604. $4,687.

369 369 28 1/29 67 4-star P2-X36 $1,709. $2,102. $3,736. $4,816.

429 429 28 1/29 83 4-star P2-X42 $1,854. $2,278. $4,001. $5,100.

489 489 28 1/29 102 4-star P2-X48 $1,997. $2,455. $4,027. $4,947.

P3-L Propeller square column base table 309 309 28 1/29 53 4-star P3-L30 $4,073.

369 369 28 1/29 67 4-star P3-L36 $4,102.

429 429 28 1/29 83 4-star P3-L42 $3,893.

489 489 28 1/29 102 4-star P3-L48 $4,090.

Order Code

Example: P2-X30-117-1-Y-AP2-X30 Propeller 309 square table,

4-star base

117 Soft Grey laminate

1 Spring Green edgeband

Y No grommet

A Anodized Aluminum base

Specify:

1. Pattern number2. Top finish3. Edge band selection (except for wood

top with wood edge)4. Grommet option5. Leg/grommet finish








Electrical


Grommet options: ($34 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49diameter. Optional grommet mountedpower receptacles available, seepage 100 for details.

No grommet (suffix Y)Single grommet, center (suffix GG)

Note:- Plexus box not available on columnbase tables.

Specification Information

The column base of the tables has oneintegrated channel for wire management.Cables are laid behind a translucentPVC flipper strip and can be easilypulled out. Wires can be brought to thetable top through an optional centergrommet.

Column profile:

Urethane table edge detail:

Flat edgeband:

Wood Edge:Tables can be specified with either 1/49wood edge with veneer top or 1/29 woodedge with laminate top.

Base:Extruded aluminum column withintegrated wire management channel inanodized or powder-coat finish. Silversteel top attachment plate. Castaluminum star-base with protectivetextured metallic surface coat matchingthe column color. Leveling low blacknylon glides.




26 27

Emanuela FrattiniPropellert Conference Table SeriesConfigurations and Product Information

Below are only a few examples of suggested configurations using PropellerConference tables and accessories.

The inherent flexibility of Propeller tables allows for diverse applications,ranging from setups for conference rooms to private offices and workstations.

Conference table types

Below are a few examples of private office and workstation configurationsusing Propeller Conference tables and accessories. The possibilities ofconnecting tables and accessories are virtually unlimited.

All configurations utilize standard Propeller products which are groupedaccording to desired application. Coordination of finishes allows for cohesiveaesthetic solutions.

Conference area configurations

Ordering

Specify:1. Pattern number2. Caster or glide selection (table

only).3. Top finish selection4. Edgeband selection5. Grommet option

(table and bridge only)6. Leg/grommet finish

P3-RL Rectangular table,Std. legs

P2-IL Rectangular deskreturn, C-Legs

P3-AL Bullet conferencetable, T-legsBullet conferencetable, Std. legs

P3-HL Rectangular table,T-Legs

P3-IL Rounded rectangulartable, T-Legs

P3-J Round conferencetable, column base

Construction

Top:1 3/169 thick, 3-ply, solid mediumdensity fiberboard core withbalanced backer sheet on bottom.Solid veneer or plastic laminate.Wood tops are cross veneered.Threaded inserts are die-cast zinc.

Edges:All table edges are finished,allowing ganged tables to beseparated and used individually.ABS flat edgeband and solid woodedge are available. On rectangulartables with wood edges, short sideshave rectalinear edges for ganging,long side edges are chamferred.

Long side edge detail:Solid wood

Short side edge detail:Solid wood


Wood Edge Profiles:AutoStrada and Saarinen edgeprofiles are available as long sideedge details. On rectangular tableswith wood edges, short sides haverectilinear edges for ganging, longside edges are chamferred.

Long side edge detail:AutoStrada profile = AE

Long side edge detail:Saarinen profile = SE

Long side edge detailPropeller profile = PE

Legs:Propeller’s S-shaped conference legincorporates two separate channelsfor power and communicationswiring. Cables are laid behindflipper strips to meet UL code.Vertical leg is extruded aluminumconstruction with clear satinanodized or powder coat finish.Legsare 59w x 2 1/49d with 25% greatercapacity than the training table leg.There are two types of PropellerConference legs:Standard Conference legs andT-Legs.

Conference Leg section

Standard Conference legs:Leg mounting plates are steelstampings with powder-coat finish.Leg end caps are injection-molded,glass-filled nylon. Black plasticglide with 3/49 levelling range or 29

lockable black nylon caster.

T-Legs:T-legs offer additional kneespace.Cast aluminum end plates withtextured paint finish. Castaluminum foot in textured metallicpowder coat.

ConferenceLeg T-Leg

Connecting Segments

Underside of worksurface ispre-drilled with zinc inserts forfreestanding or bridging legposition. Rectangular tops that are789 and wider cannot be sharedbetween legs. Standard conferenceleg includes screws for attachmentof mounting plate underworksurface. Tool free option allowsreconfiguration using soft touchhand screws. Kit includes: 8 softtouch hand screws for 2 legs.

Glides/casters:Glides and locking casters-blacknylon.

Electrical options:Electrical options include Grommet,Quadruplex and Plexus box. Pleasesee Propeller Electrical sectionbeginning on page 92.

Shipping:Tops and legs are shippedseparately. Legs ship knocked-downinto foot plate and vertical assembly.Simple field assembly required.


28 29

GG

Y

Emanuela FrattiniPropellert Conference Table SeriesRound/Rounded Tables with Standard Legs


description type w d h

clearance

between

legs d

clearance

between

legs w

no. of legs

included

top weight

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-DL Round table, with legs 489 28 1/29 28 1/29 4 59 P3-DL48 $2,504. $6,176. $4,677. $7,790. $8,181.

549 28 1/29 33 1/29 4 75 P3-DL54 $3,049. $6,706. $5,362. $8,448. $8,871.

609 28 1/29 399 4 92 P3-DL60 $3,054. $6,858. $5,553. $8,731. $9,167.

P3-ML Rounded square table, with legs 429 429 28 1/29 20 1/29 4 47 P3-ML42 $3,022. $6,628. $6,188. $9,093. $9,550.

489 489 28 1/29 25 1/29 4 62 P3-ML48 $3,037. $6,778. $6,223. $9,362. $9,831.

549 549 28 1/29 30 1/29 4 80 P3-ML54 $3,184. $6,926. $6,472. $9,635. $10,116.

609 609 28 1/29 35 1/29 4 99 P3-ML60 $3,253. $7,079. $6,678. $9,905. $10,402.

P3-NL Rounded rectangular table, with legs 609 429 28 1/29 27 1/49 259 4 74 P3-NL44 $3,179. $7,721. $6,992. $10,766. $11,302.

669 429 28 1/29 33 1/49 259 4 82 P3-NL46 $3,270. $7,930. $7,113. $10,908. $11,455.

729 429 28 1/29 39 1/49 259 4 90 P3-NL48 $3,272. $8,142. $7,127. $11,048. $11,601.

789 429 28 1/29 45 1/49 259 4 98 P3-NL50 $3,278. $8,351. $7,296. $11,189. $11,747.

849 429 28 1/29 51 1/49 259 4 106 P3-NL52 $3,281. $8,562. $7,313. $11,330. $11,898.

909 429 28 1/29 57 1/49 259 4 115 P3-NL54 $3,284. $8,772. $7,536. $11,466. $12,041.

969 429 28 1/29 63 1/49 259 4 123 P3-NL56 $3,293. $8,984. $7,547. $11,610. $12,194.

609 489 28 1/29 28 1/49 259 4 83 P3-NL64 $3,266. $8,142. $7,018. $11,039. $11,591.

669 489 28 1/29 34 1/49 259 4 92 P3-NL66 $3,272. $8,351. $7,133. $11,177. $11,737.

729 489 28 1/29 40 1/49 259 4 102 P3-NL68 $3,278. $8,562. $7,154. $11,321. $11,885.

789 489 28 1/29 46 1/49 259 4 111 P3-NL70 $3,281. $8,772. $7,322. $11,461. $12,034.

849 489 28 1/29 52 1/49 259 4 120 P3-NL72 $3,286. $8,984. $7,344. $11,599. $12,176.

909 489 28 1/29 58 1/49 259 4 130 P3-NL74 $3,293. $9,194. $7,566. $11,740. $12,326.

969 489 28 1/29 64 1/49 259 4 139 P3-NL76 $3,297. $9,404. $7,584. $11,880. $12,476.

729 609 28 1/29 41 1/49 279 4 126 P3-NL88 $3,511. $9,194. $7,670. $11,719. $12,305.

789 609 28 1/29 47 1/49 279 4 138 P3-NL90 $3,516. $9,404. $7,695. $11,861. $12,455.

849 609 28 1/29 53 1/49 279 4 149 P3-NL92 $3,520. $9,601. $7,870. $11,993. $12,593.

909 609 28 1/29 59 1/49 279 4 161 P3-NL94 $3,527. $9,804. $7,896. $12,125. $12,731.

969 609 28 1/29 65 1/49 279 4 173 P3-NL96 $3,532. $10,007. $8,015. $12,252. $12,865.

Order Code

Example: P3-NL44-C-K-SE-AG-AP3-NL44 609 x 429 rounded rectangle

table

C Locking casters

K Maple veneer top

SE Saarinen edge profile

AG Left and right grommets,mid-depth

A Anodized grommets

Specify:

1. Pattern number2. Locking caster or glide selection3. Top finish selection4. Edgeband selection5. Edge profile option (veneer/wood

edge only)6. Grommet/Plexus cutout option7. Grommet/leg finish

Finishes




Wood edge profiles:Autostrada edge (suffix AE)Propeller edge (suffix PE)Saarinen edge (suffix SE)


Grommet finishes:Anodized Aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 612)Bright White (suffix 118)

Electrical


Grommet options: ($49 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49 indiameter. See page 28 for details.Optional grommet-mounted powerreceptacles available, see page 100.

No grommet (Y)Single grommet, center, mid-depth(GG)Two grommets, left & right, mid-depth(AG)Single grommet, left, mid-depth (BG)

Plexus Cutout Options: ($49 per cutout)Tables can be hardwired using pre-wiredor empty boxes, or plugged in withplexus boxes with cordset. Tables may bespecified with zero, one or two cutouts.To specify plexus box and for moreinformation, see pages 92.

For no Plexus (Y)For medium Plexus, center, mid-depth(GM)For medium Plexus, left & right,mid-depth (AM) *For medium double Plexus, center,mid-depth (GMD)For medium double Plexus, left andright, mid-depth (AMD) *

*for rounded rectangular tables only

Note:- Double Plexus AMD and GMDconfigurations not available on 429 deeptables.- Plexus box not available on 429 squaretables.- Configurations AM, AMD and GJ notavailable on 489, 549 and 609 squaretables.- AM and AMD are not appropriatefor stand alone tables or endsegments.

Features




30 31

Emanuela FrattiniPropellert Conference Table SeriesBullet Table with Standard Legs


description type w d h

clearance

btwn. legs

w

clearance

btwn. legs

d

no. of legs

incl.

top wgt

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-BL Bullet table, with legs 549 429 28 1/29 25 1/29 259 4 70 P3-BL42 $3,178. $8,142. $6,452. $9,356. $9,823.

609 429 28 1/29 31 1/29 259 4 78 P3-BL44 $3,181. $8,241. $6,470. $9,526. $10,003.

669 429 28 1/29 37 1/29 259 4 86 P3-BL46 $3,325. $8,343. $6,650. $9,697. $10,180.

729 429 28 1/29 43 1/29 259 4 94 P3-BL48 $3,329. $8,440. $6,670. $9,863. $10,357.

789 429 28 1/29 49 1/29 259 4 102 P3-BL50 $3,334. $8,542. $6,781. $10,036. $10,537.

849 429 28 1/29 55 1/29 259 4 111 P3-BL52 $3,342. $8,643. $6,802. $10,209. $10,715.

909 429 28 1/29 61 1/29 259 4 119 P3-BL54 $3,346. $8,743. $6,912. $10,377. $10,896.

969 429 28 1/29 71 1/49 259 4 127 P3-BL56 $3,351. $8,840. $6,934. $10,549. $11,078.

549 489 28 1/29 25 1/29 259 4 79 P3-BL62 $3,180. $8,351. $6,709. $9,697. $10,180.

609 489 28 1/29 31 1/29 259 4 88 P3-BL64 $3,186. $8,448. $6,732. $9,863. $10,357.

669 489 28 1/29 37 1/29 259 4 98 P3-BL66 $3,329. $8,551. $6,913. $10,036. $10,537.

729 489 28 1/29 43 1/29 259 4 107 P3-BL68 $3,334. $8,652. $6,937. $10,209. $10,715.

789 489 28 1/29 49 1/29 259 4 116 P3-BL70 $3,342. $8,752. $7,047. $10,377. $10,896.

849 489 28 1/29 55 1/29 259 4 126 P3-BL72 $3,344. $8,854. $7,070. $10,549. $11,078.

909 489 28 1/29 61 1/29 259 4 135 P3-BL74 $3,348. $8,953. $7,231. $10,715. $11,253.

969 489 28 1/29 71 1/29 259 4 145 P3-BL76 $3,356. $9,050. $7,252. $10,889. $11,433.

549 609 28 1/29 25 1/29 279 4 98 P3-BL82 $3,399. $8,984. $7,252. $10,709. $11,242.

609 609 28 1/29 31 1/29 279 4 110 P3-BL84 $3,408. $9,083. $7,274. $10,877. $11,421.

669 609 28 1/29 37 1/29 279 4 122 P3-BL86 $3,588. $9,183. $7,505. $11,048. $11,601.

729 609 28 1/29 43 1/29 279 4 133 P3-BL88 $3,592. $9,282. $7,673. $11,220. $11,780.

789 609 28 1/29 49 1/29 279 4 145 P3-BL90 $3,597. $9,388. $7,700. $11,389. $11,960.

849 609 28 1/29 55 1/29 279 4 157 P3-BL92 $3,603. $9,485. $7,817. $11,556. $12,137.

909 609 28 1/29 61 1/29 279 4 168 P3-BL94 $3,607. $9,587. $7,842. $11,732. $12,319.

969 609 28 1/29 72 1/49 279 4 180 P3-BL96 $3,616. $9,682. $7,868. $11,901. $12,496.

Order Code

Example: P3-BL42-C-DC-R5-GG-AP3-BL42 549 x 429 bullet table

C Locking casters

DC Deep Cherry laminate top

R5 Black edgeband

GG Single grommet, center

A Aluminum grommet and legfinish

Specify:

1. Pattern number2. Locking caster or glide selection3. Top finish selection4. Edgeband selection5. Edge profile option (veneer/wood


Finishes







Electrical


Grommet options: ($49 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49 indiameter, see page 28 for details.Optional grommet-mounted powerreceptacles available, see page 100.

No grommet (Y)Single grommet, center, mid-depth(GG)Two grommets, left & right, mid-depth(AG)Single grommet, right, mid-depth (HG)Single grommet, left, mid-depth (BG)


For no Plexus (Y)For medium Plexus, center, mid-depth(GM)For medium Plexus, left & right,mid-depth (AM)For double medium Plexus, center,mid-depth (GMD)For double medium Plexus, left & right,mid-depth (AMD)

Note:- Double Plexus AMD and GMDconfigurations not available on 429 deeptables.- AM and AMD are not appropriatefor stand alone tables or endsegments.

Features




32 33

Emanuela FrattiniPropellert Conference Table SeriesSquare/Rectangular Tables with Standard Legs


description w d h

clearance

btwn. legs

w

clearance

btwn. legs d

no. of legs

incl.

top wgt.

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-SL Square table, with legs 429 429 28 1/29 25 1/49 259 4 57 P3-SL42 $2,780. $5,153. $5,025. $6,989. $7,339.

489 489 28 1/29 31 1/49 259 4 75 P3-SL48 $2,793. $5,656. $5,062. $7,820. $8,213.

549 549 28 1/29 37 1/49 259 4 95 P3-SL54 $2,950. $6,154. $5,529. $8,932. $9,377.

609 609 28 1/29 43 1/49 279 4 117 P3-SL60 $2,965. $6,656. $5,674. $8,913. $9,360.

P3-RL Rectangular table, with legs 489 429 28 1/29 31 1/49 259 4 66 P3-RL40 $2,843. $5,431. $5,618. $7,547. $7,928.

549 429 28 1/29 37 1/49 259 4 74 P3-RL42 $2,887. $5,564. $5,684. $7,694. $8,076.

609 429 28 1/29 43 1/49 259 4 82 P3-RL44 $2,892. $5,697. $5,702. $7,831. $8,221.

669 429 28 1/29 49 1/49 259 4 90 P3-RL46 $3,031. $5,825. $5,877. $7,972. $8,368.

729 429 28 1/29 55 1/49 259 4 98 P3-RL48 $3,034. $5,957. $5,893. $8,111. $8,519.

789 429 28 1/29 61 1/49 259 4 107 P3-RL50 $3,038. $6,086. $5,912. $8,248. $8,662.

849 429 28 1/29 67 1/49 259 4 115 P3-RL52 $3,048. $6,218. $6,160. $8,391. $8,809.

909 429 28 1/29 73 1/49 259 4 123 P3-RL54 $3,052. $6,345. $6,174. $8,532. $8,959.

969 429 28 1/29 79 1/49 259 4 131 P3-RL56 $3,056. $6,477. $6,192. $8,675. $9,107.

549 489 28 1/29 37 1/49 259 4 84 P3-RL62 $2,892. $5,804. $5,939. $7,960. $8,360.

609 489 28 1/29 43 1/49 259 4 94 P3-RL64 $2,896. $5,934. $5,954. $8,105. $8,509.

669 489 28 1/29 49 1/49 259 4 103 P3-RL66 $3,036. $6,063. $6,131. $8,241. $8,654.

729 489 28 1/29 55 1/49 259 4 113 P3-RL68 $3,039. $6,195. $6,151. $8,382. $8,800.

789 489 28 1/29 55 1/49 259 4 122 P3-RL70 $3,049. $6,328. $6,170. $8,522. $8,948.

849 489 28 1/29 55 1/49 259 4 131 P3-RL72 $3,052. $6,457. $6,328. $8,663. $9,100.

909 489 28 1/29 55 1/49 259 4 141 P3-RL74 $3,056. $6,586. $6,346. $8,805. $9,247.

969 489 28 1/29 55 1/49 259 4 150 P3-RL76 $3,061. $6,717. $6,363. $8,943. $9,391.

489 609 28 1/29 31 1/49 279 4 94 P3-RL80 $2,896. $6,438. $5,960. $8,643. $9,076.

549 609 28 1/29 37 1/49 279 4 105 P3-RL82 $3,076. $6,570. $6,275. $8,783. $9,224.

669 609 28 1/29 49 1/49 279 4 129 P3-RL86 $3,253. $6,826. $6,517. $9,065. $9,516.

729 609 28 1/29 55 1/49 279 4 141 P3-RL88 $3,260. $6,954. $6,540. $9,205. $9,665.

789 609 28 1/29 61 1/49 279 4 152 P3-RL90 $3,266. $7,086. $6,561. $9,345. $9,811.

849 609 28 1/29 67 1/49 279 4 164 P3-RL92 $3,272. $7,217. $6,814. $9,485. $9,944.

909 609 28 1/29 73 1/49 279 4 176 P3-RL94 $3,278. $7,348. $6,839. $9,626. $10,108.

969 609 28 1/29 79 1/49 279 4 288 P3-RL96 $3,281. $7,481. $6,862. $9,764. $10,255.

Order Code

Example: P3-RL56-C-Z-SE-Y-AP3-RL56 969 x 429 rectangular table

C Locking casters

Z Medium Red Mahogany top

SE Saarinen edge profile

Y No grommets

A Anodized Aluminum legs

Specify:

1. Pattern number2. Locking castor or glide selection3. Top finish selection4. Edgeband selection5. Edge profile option (veneer/wood


Finishes







Electrical

+ For more detailed information, consultthe Electical section of the PropellerManual.

Grommet options: ($49 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49 indiameter, see page 28 for details.Optional grommet-mounted powerreceptacles available, see page 100.

No grommet (Y)Single grommet, center, mid-depth (GG)Two grommets, left & right, mid-depth(AG)Single grommet, left, mid-depth (BG)



Note:- Double Plexus AMD and GMDconfigurations not available on 429 deeptables.- Plexus box not available on 429 squaretables and 489x 429 tables.- Configurations AM and AMD notavailable on 489, 549 and 609 squaretables.- AM and AMD are not appropriatefor stand alone tables or endsegments.

Features




34 35

Emanuela FrattiniPropellert Conference Table SeriesRounded Two Segment Conference Table with Standard Legs


description overall w d h

section width

A, B

no. of legs

included top wgt (lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-CL Rounded rectangular table, 2segments, with legs

1089 429 28 1/29 549 6 140 P3-CL10 $5,477. $15,520. $12,306. $17,948. $18,845.

1209 429 28 1/29 609 6 156 P3-CL12 $5,487. $15,721. $12,342. $18,284. $19,199.

1329 429 28 1/29 669 6 172 P3-CL14 $5,671. $15,921. $12,586. $18,626. $19,557.

1449 429 28 1/29 729 6 188 P3-CL16 $5,679. $16,120. $12,625. $18,971. $19,914.

1569 429 28 1/29 789 6 204 P3-CL18 $5,693. $16,318. $12,660. $19,310. $20,275.

1689 429 28 1/29 849 6 222 P3-CL20 $5,702. $16,522. $12,698. $19,653. $20,637.

1809 429 28 1/29 909 6 238 P3-CL22 $5,712. $16,722. $12,734. $19,989. $20,993.

1089 489 28 1/29 549 6 158 P3-CL30 $5,487. $15,939. $12,352. $18,626. $19,557.

1209 489 28 1/29 609 6 176 P3-CL32 $5,494. $16,140. $12,390. $18,971. $19,914.

1329 489 28 1/29 669 6 196 P3-CL34 $5,679. $16,345. $12,637. $19,310. $20,275.

1449 489 28 1/29 729 6 214 P3-CL36 $5,693. $16,543. $12,680. $19,653. $20,637.

1569 489 28 1/29 789 6 232 P3-CL38 $5,702. $16,744. $12,723. $19,989. $20,993.

1689 489 28 1/29 849 6 252 P3-CL40 $5,712. $16,943. $12,761. $20,332. $21,351.

1809 489 28 1/29 909 6 270 P3-CL42 $5,722. $17,145. $12,802. $20,674. $21,706.

1089 609 28 1/29 549 6 196 P3-CL50 $5,716. $17,204. $12,436. $20,654. $21,688.

1209 609 28 1/29 609 6 220 P3-CL52 $5,727. $17,405. $12,488. $20,994. $21,890.

1329 609 28 1/29 669 6 244 P3-CL54 $6,113. $17,605. $12,974. $21,337. $22,404.

1449 609 28 1/29 729 6 266 P3-CL56 $6,122. $17,804. $13,026. $21,676. $22,758.

1569 609 28 1/29 789 6 290 P3-CL58 $6,136. $18,004. $13,072. $22,016. $23,114.

1689 609 28 1/29 849 6 314 P3-CL60 $6,147. $18,206. $13,126. $22,362. $23,475.

1809 609 28 1/29 909 6 336 P3-CL62 $6,159. $18,407. $13,172. $22,696. $23,830.

Note: Order 2 additional legs if tables will be seperated

Order Code

Example: P3-CL10-G-K-AE-HG-HG-A

P3-CL10 1089 x 429 roundedrectangular table, 2segments

G Glides

K Maple veneer top

AE Autostrada edge profile

HG Single grommet, outside,segment A

HG Single grommet, outside,segment B

A Anodized Aluminumgrommet and leg finish

Specify:

1. Pattern number2. Locking caster or glide option3. Top finish selection4. Edgeband selection5. Edge profile option (veneer/wood

edge only)6. Grommet/Plexus cutout option,

segment A7. Grommet/Plexus cutout option,

segment B8. Grommet/leg finish

Specify additional legs:9. Pattern number10. Leg finish

Finishes







Electrical


Grommet options: ($49 per cutout)Individual table segments may bespecified with zero, one or two grommets.All grommets are 3 1/49 in diameter, seepage 28 for details. Optionalgrommet-mounted power receptaclesavailable, see page 100.


Plexus Cutout Options: ($49 per cutout)Table can be hardwired using pre-wiredor empty boxes, or plugged in withplexus boxes with cordset. Individualtable segments may be specified withzero, one or two cutouts. To specifyplexus box and for more information, seepages 92.



Features




36 37

Emanuela FrattiniPropellert Conference Table SeriesRounded Three Segment Conference Tables with Standard Legs



section

width A,C

section

width B

no. of legs

incl.

top wgt

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-FL Rounded rectangular table, 3segments, with legs

1929 429 28 1/29 609 729 8 248 P3-FL06 $8,308. $20,534. $18,489. $25,475. $26,750.

2049 429 28 1/29 729 609 8 262 P3-FL10 $8,574. $21,054. $18,571. $26,034. $27,340.

2169 429 28 1/29 729 729 8 286 P3-FL12 $8,712. $21,313. $18,778. $26,319. $27,636.

2289 429 28 1/29 789 729 8 302 P3-FL14 $8,744. $21,517. $18,882. $26,659. $27,991.

2409 429 28 1/29 849 729 8 320 P3-FL16 $8,773. $21,717. $18,987. $26,997. $28,348.

2529 429 28 1/29 909 729 8 336 P3-FL18 $8,809. $21,917. $19,091. $27,343. $28,710.

1929 489 28 1/29 609 729 8 289 P3-FL26 $8,546. $21,376. $18,649. $26,245. $27,557.

2049 489 28 1/29 729 609 8 308 P3-FL30 $8,803. $21,776. $19,073. $26,928. $28,273.

2169 489 28 1/29 729 729 8 327 P3-FL32 $8,836. $21,973. $19,183. $27,268. $28,630.

2289 489 28 1/29 789 729 8 345 P3-FL34 $8,867. $22,177. $19,296. $27,612. $28,992.

2409 489 28 1/29 849 729 8 365 P3-FL36 $8,902. $22,378. $19,406. $27,952. $29,348.

2529 489 28 1/29 909 729 8 383 P3-FL38 $8,939. $22,578. $19,519. $28,293. $29,708.

1929 609 28 1/29 609 729 8 359 P3-FL46 $8,904. $23,400. $19,117. $29,246. $30,711.

2049 609 28 1/29 729 609 8 383 P3-FL50 $9,388. $23,801. $19,946. $29,827. $31,319.

2169 609 28 1/29 729 729 8 407 P3-FL52 $9,424. $24,003. $20,072. $30,119. $31,621.

2289 609 28 1/29 789 729 8 431 P3-FL54 $9,459. $24,205. $20,196. $30,455. $31,982.

2409 609 28 1/29 849 729 8 455 P3-FL56 $9,498. $24,405. $20,324. $30,801. $32,341.

2529 609 28 1/29 909 729 8 477 P3-FL58 $9,534. $24,603. $20,447. $31,140. $32,696.

Note: Order 4 additional legs if table will be separated.

Order Code

Example: P3-FL10-G-SL-R6-Y-GMD-Y-GG-612

P3-FL10 2049 x 429 roundedrectangular table, 3segments

G Glides

SL Slate laminate tops


Y Single grommet, center,mid-depth, segment A

GMD Double medium plexus,center, segment B

612 Medium Metallic Greygrommet and leg finish

Specify:



segment A7. Grommet/Plexus option, segment B8. Grommet/Plexus option, segment C

Specify additioanl legs:9. Pattern number10. Leg finish

Finishes







Electrical

+ For more detailed information. consultthe Electrical section of the PropellerManual.


No grommet (Y)Single grommet, center, mid-depth (GG)Two grommets, left & right, mid-depth(AG)Single grommet, right, mid-depth (HG)Single grommet, left, mid-depth (BG)

Plexus Cutout Options: ($49 per cutout)Tables can be hardwired using pre-wiredor empty boxes, or plugged in withplexus boxes with cordset. Individualtable segments may be specified withzero, one or two cutouts. To specifyplexus box and for more information, seepages 92.

For no Plexus (Y)For medium Plexus, center, mid-depth(GM)For medium Plexus, left & right,mid-depth (AM)For double medium Plexus, center,mid-depth (GMD)For double medium Plexus, left andright, mid-depth (AMD)


Features




38 39

Emanuela FrattiniPropellert Conference Table SeriesRounded Four Segment Conference Tables with Standard Legs


description total w d h

section

width A,D

section

width B,C

no. of legs

incl.

top wgt.

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-EL Rounded rectangular table, 4segments, with legs

2649 429 28 1/29 729 609 10 352 P3-EL10 $11,737. $20,232. $25,816. $28,752. $30,189.

2769 429 28 1/29 789 609 10 368 P3-EL12 $11,779. $20,494. $25,939. $29,034. $30,484.

2889 429 28 1/29 789 669 10 384 P3-EL14 $11,819. $20,755. $26,068. $29,314. $30,780.

3009 429 28 1/29 849 669 10 402 P3-EL16 $11,861. $21,012. $26,194. $29,591. $31,073.

3129 429 28 1/29 849 729 10 418 P3-EL18 $11,900. $21,271. $26,322. $29,878. $31,373.

3249 429 28 1/29 909 729 10 434 P3-EL20 $11,941. $21,534. $26,450. $30,158. $31,667.

2649 489 28 1/29 729 609 10 402 P3-EL30 $11,933. $21,195. $26,428. $29,837. $31,328.

2769 489 28 1/29 789 609 10 420 P3-EL32 $11,972. $21,459. $26,563. $30,119. $31,621.

2889 489 28 1/29 789 669 10 438 P3-EL34 $12,016. $21,717. $26,697. $30,398. $31,919.

3009 489 28 1/29 849 669 10 458 P3-EL36 $12,057. $21,973. $26,831. $30,681. $32,214.

3129 489 28 1/29 849 729 10 478 P3-EL38 $12,095. $22,238. $26,965. $30,960. $32,506.

3249 489 28 1/29 909 729 10 496 P3-EL40 $12,139. $22,497. $27,103. $31,240. $32,805.

2649 609 28 1/29 729 609 10 500 P3-EL50 $12,784. $24,163. $27,715. $33,103. $34,757.

2769 609 28 1/29 789 609 10 524 P3-EL52 $12,825. $24,340. $27,862. $33,368. $35,036.

2889 609 28 1/29 789 669 10 548 P3-EL54 $12,869. $24,684. $28,012. $33,668. $35,352.

3009 609 28 1/29 849 669 10 572 P3-EL56 $12,917. $25,027. $28,163. $33,965. $35,663.

3129 609 28 1/29 849 729 10 596 P3-EL58 $12,958. $25,282. $28,310. $34,249. $35,961.

3249 609 28 1/29 909 729 10 618 P3-EL60 $13,002. $25,550. $28,463. $34,529. $36,254.

Note: Order 6 additional legs if tables will be separated.

Order Code

Example: P3-EL32-G-125-PE-Y-GM-GM-Y-A

P3-EL32 2769 x 489 roundedrectangular table, 4segments

G Glides

125 Natural Maple laminate top

PE Propeller edge

Y No plexus, segment A

GM Single grommet, center,mid-depth, segment B

GM Single grommet, center,mid-depth, segment C

Y No plexus, segment D


Specify:




segment B8. Grommet/Plexus cutout option,

segment C9. Grommet/Plexus sutout option,

segment D10. Grommet.leg finish

Specify additional legs11. Pattern number12. Leg finish

Finishes







Electrical







Features




40 41

Emanuela FrattiniPropellert Conference Table SeriesRectangular Two Segment Conference Table with Standard Legs



section width,

A,B

no. of legs

incl. top wgt. (lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-SL Rectangular table, 2 segments withlegs

1089 429 28 1/29 549 6 148 P3-SL10 $5,237. $10,366. $10,676. $14,618. $15,348.

1209 429 28 1/29 609 6 164 P3-SL12 $5,336. $10,629. $10,709. $14,897. $15,642.

1329 429 28 1/29 669 6 180 P3-SL14 $5,415. $10,889. $11,057. $15,180. $15,939.

1449 429 28 1/29 729 6 196 P3-SL16 $5,470. $11,146. $11,117. $15,460. $16,230.

1089 489 28 1/29 549 6 168 P3-SL30 $5,248. $10,846. $11,180. $15,158. $15,916.

1209 489 28 1/29 609 6 188 P3-SL32 $5,347. $11,109. $11,218. $15,441. $16,214.

1329 489 28 1/29 669 6 206 P3-SL34 $5,420. $11,369. $11,574. $15,721. $16,507.

1449 489 28 1/29 729 6 226 P3-SL36 $5,479. $11,631. $11,608. $16,001. $16,800.

1089 609 28 1/29 549 6 210 P3-SL50 $5,670. $12,370. $11,899. $16,800. $17,638.

1209 609 28 1/29 609 6 234 P3-SL52 $6,156. $12,554. $12,338. $17,062. $17,919.

1329 609 28 1/29 669 6 258 P3-SL53 $6,188. $12,895. $12,397. $17,362. $18,229.

1449 609 28 1/29 729 6 282 P3-SL56 $6,258. $13,153. $12,491. $17,646. $18,527.


Order Code

Example: P3-SL10-G-K-R5-BG-BG-A

P3-SL10 1089 x 429 rectangulartable, 2 segments

G Glides

K Maple veneer top

R5 Black edgeband

BG Single grommet, side,segment A

BG Single grommet, side,segment B

A Anodized Aluminumgrommet and leg finish

Specify:




segment B8. Grommet/leg finish

Finishes







Electrical



No grommet (Y)Single grommet, center (GG)Two grommets, left & right (AG)Single grommet, right (BG)




Features




42 43

Emanuela FrattiniPropellert Conference Table SeriesRectangular Three Segment Conference Table with Standard Legs



section

width A,C

section

width B

no. of legs

incl.

top wgt.

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-TL Rectangular table, 3 segments, withlegs

1569 429 28 1/29 549 489 8 214 P3-TL10 $7,401. $15,038. $15,677. $21,404. $22,473.

1689 429 28 1/29 609 489 8 230 P3-TL12 $7,500. $15,298. $15,712. $21,685. $22,772.

1809 429 28 1/29 609 609 8 246 P3-TL14 $7,653. $15,557. $15,735. $21,965. $23,063.

1929 429 28 1/29 669 609 8 262 P3-TL16 $7,729. $15,819. $16,088. $22,248. $23,362.

2049 429 28 1/29 729 609 8 278 P3-TL18 $7,786. $16,082. $16,145. $22,530. $23,655.

2169 429 28 1/29 729 729 8 294 P3-TL20 $7,850. $16,345. $16,349. $22,809. $23,951.

1569 489 28 1/29 549 489 8 243 P3-TL30 $7,515. $15,739. $16,457. $22,216. $23,328.

1689 489 28 1/29 609 489 8 263 P3-TL32 $7,620. $16,001. $16,506. $22,497. $23,623.

1809 489 28 1/29 609 609 8 282 P3-TL34 $7,678. $16,281. $16,542. $22,779. $23,916.

1929 489 28 1/29 669 609 8 300 P3-TL36 $7,759. $16,543. $16,911. $23,058. $24,210.

2049 489 28 1/29 729 609 8 320 P3-TL38 $7,822. $16,800. $16,964. $23,341. $24,506.

2169 489 28 1/29 729 729 8 339 P3-TL40 $7,896. $17,062. $17,175. $23,618. $24,799.

1569 609 28 1/29 549 489 8 304 P3-TL50 $8,218. $18,044. $17,717. $24,684. $25,917.

1689 609 28 1/29 609 489 8 328 P3-TL52 $8,726. $18,226. $18,195. $24,946. $26,194.

1809 609 28 1/29 609 609 8 351 P3-TL54 $8,992. $18,448. $18,470. $25,213. $26,474.

1929 609 28 1/29 669 609 8 375 P3-TL56 $9,030. $18,792. $18,559. $25,518. $26,794.

2049 609 28 1/29 729 609 8 399 P3-TL58 $9,115. $19,048. $18,686. $25,795. $27,085.

2169 609 28 1/29 729 729 8 423 P3-TL60 $9,160. $19,350. $18,747. $26,088. $27,388.


Order Code

Example: P3-TL10-G-SL-5-GG-AG-GG-612

P3-TL10 1569 x 429 roundedrectangular table, 3segments

G Glides

SL Slate laminate top

5 Medium Grey edgeband

GG Single grommet, center,segment A

AG Two grommets, left andright, mid-depth, segment B

GG Single grommet, center,segment C

612 Medium Metallic Greygrommet and leg finish

Specify:





segment C9. Grommet/leg finish

Finishes







Electrical



No grommet (Y)Single grommet, center, mid-depth (GG)Two grommets, left & right, mid-depth(AG)Single grommet, side (BG)




Features




44 45

Emanuela FrattiniPropellert Conference Table SeriesRectangular Four Segment Conference Table with Standard Legs



section

width A,D

section

width B,C

no. of legs

incl.

top wgt.

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-VL Rectangular table, 4 segments, withlegs

2289 429 28 1/29 609 549 10 312 P3-VL10 $9,848. $20,232. $20,677. $28,752. $30,189.

2409 429 28 1/29 609 609 10 328 P3-VL12 $9,960. $20,494. $20,746. $29,034. $30,484.

2529 429 28 1/29 669 609 10 344 P3-VL14 $10,059. $20,755. $21,169. $29,314. $30,685.

2649 429 28 1/29 669 669 10 360 P3-VL16 $10,148. $21,012. $21,552. $29,591. $31,073.

2769 429 28 1/29 729 669 10 376 P3-VL18 $10,217. $21,271. $21,648. $29,878. $31,373.

2889 429 28 1/29 729 729 10 392 P3-VL20 $10,290. $21,534. $21,737. $30,158. $31,667.

2289 489 28 1/29 609 549 10 356 P3-VL30 $9,968. $21,195. $22,014. $29,837. $31,328.

2409 489 28 1/29 609 609 10 376 P3-VL32 $10,085. $21,459. $22,091. $30,119. $31,621.

2529 489 28 1/29 669 609 10 394 P3-VL34 $10,174. $21,717. $22,490. $30,398. $31,919.

2649 489 28 1/29 669 669 10 412 P3-VL36 $10,264. $21,973. $22,886. $30,681. $32,214.

2769 489 28 1/29 729 669 10 432 P3-VL38 $10,331. $22,238. $22,962. $30,960. $32,506.

2889 489 28 1/29 729 729 10 452 P3-VL40 $10,406. $22,497. $23,039. $31,240. $32,805.

2289 609 28 1/29 609 549 10 444 P3-VL50 $11,366. $24,163. $24,275. $33,103. $34,757.

2409 609 28 1/29 609 609 10 468 P3-VL52 $11,886. $24,340. $24,773. $33,368. $35,036.

2529 609 28 1/29 669 609 10 492 P3-VL54 $11,931. $24,684. $24,872. $33,668. $35,352.

2649 609 28 1/29 669 669 10 516 P3-VL56 $11,972. $25,027. $24,974. $33,965. $35,663.

2769 609 28 1/29 729 669 10 540 P3-VL58 $12,065. $25,282. $25,113. $34,249. $35,961.

2889 609 28 1/29 729 729 10 564 P3-VL60 $12,160. $25,550. $25,252. $34,529. $36,254.


Order Code

Example: P3-VL32-G-125-R5-Y-BG-BG-Y-A

P3-VL32 2769 x 489 roundedrectangular table, 4segments

G Glides

125 Natural Maple laminate top

R5 Black edgeband

Y No grommet, segment A

BG Single grommet, right,segment B

BG Single grommet, right,segment C

Y No grommet, segment D


Specify:





segment C9. Grommet/Plexus cutout option,

segment D10. Grommet/leg finish

Finishes







Electrical



No grommet (Y)Single grommet, center (GG)Two grommets, left & right (AG)Single grommet, right (BG)




Features




46 47

Emanuela FrattiniPropellert Conference Table SeriesConference Tables with Drum and Peanut Base ProductInformation

Below are only a few examples of suggested configurations using PropellerConference tables with Drum and Peanut base.

The inherent flexibility of Propeller tables allows for applications Ideal forconference rooms and break-out areas.

Table types and configurations

Ordering Information Contruction

Specify:

1. Pattern number2. 2. Top finish selection3. 3. Edgeband selection4. 4. Grommet option5. 5. Base finish*D/P, D= Drum base, P= Peanut base

P3-RD/P Rectangular tableP3-BD/P Bullet conference tableP3-ND/P Rounded rectangular tableP3-DD/P Round conference tableP3-SD/P Square conference tableP3-BD/P Rounded square tableP3-SD/P Rectangular table, 2 segmentsP3-TD/P Rectangular table, 3 segmentsP3-VD/P Rectangular table, 4 segmentsP3-CD/P Rounded rectangular table, 2

segmentsP3-FD/P Rounded rectangular table, 3

segmentsP3-ED/P Rounded rectangular table, 4

segments

Top:1 3/169 thick, 3-ply, solid mediumdensity fiberboard core withbalanced backer sheet on bottom.Wood veneer or plastic laminate.Threaded inserts are die-cast zinc.

Edges:All table edges are finished,allowing ganged tables to beseparated and used individually;ABS flat edgeband and solid woodedge are available. On rectangulartables with wood edges, short sideshave rectilinear edges for ganging,long side edges are chamferred.

Long side edge detail:Solid wood

Short side edge detail:Solid wood


Wood Edge Profiles:AutoStrada and Saarinen edgeprofiles are available as long sideedge details. On rectangular tableswith wood edges, short sides haverectilinear edges for ganging, longside edges are chamferred. Pleasecontact your Knoll representative forpricing.

Long side edge detail:AutoStrada profile = AE

Long side edge detail:Saarinen profile = SE

Long side edge detail:Propeller profile = PE

Conference tables with Drum and Peanut bases offer enhanced wiremanagement capability and unobstructed kneespace. On most tables drumand peanut bases will be located at the center of the table or segment, someexceptions arise on tables with three and four segments, where a base isshared between two segments.

Three different Drum bases are offered, to suit varying top shapes and size oftables. Certain larger tables may require support frames under the table top.A Peanut base suits all table sizes.

Table with drum baseThree sizes available.

Small: an 189 round drum with a 259 round footplateMedium: an 189 round drum with a 309 roundfootplateLarge: a 239 round drum with a 309 round footplate

Please refer to base size when ordering a drum basetable.

Drum base side panels are available as perforatedmetal with silver powder coat finish or matchingveneer.

Table with square drum baseThree sizes available.

Small: a 139 square drum with a 259 square footplateMedium: a 139 square drum with a 309 squarefootplateLarge: a 16 1/29 square drum with a 309 squarefootplate

Please refer to base size when ordering a square drumbase table.

Square drum base side panels are available in aperforated solid metal with silver powder coat finishor matching veneer side panels.

Table with rectangular drum baseFour sizes available.

Small: a 249 x 139 rectangular base with a 369 x 309

rectangular footplateMedium: a 249 x 139 rectangular base with a 489 x309 rectangular footplateLarge: a 319 x 169 rectangular base with a 369 x 369

rectangular footplateX-Large: a 169 x 319 rectangular base with a 489 x369 rectangular footplate

Please refer to base size when ordering a rectangulardrum base table

Rectangular drum base side panels are available assolid metal with silver powder coat finish or matchingveneer side panels.

Peanut baseAll 429, 489, and 609 tables feature the 279 x 89

Peanut base.

Installation

Side panels:The side panels of the Drum areavailable in 18-gauge perforatedmetal with a silver powder coat finishor solid veneer (same finishes asveneer tops). Veneer panels interiorfinish, black powder coat sheetmetal.

Panels feature black nylon fastnersand are easily removable withouttools, providing immediate access towiring, in compliance with ULguidelines.

Field attachment of Drum andPeanut base to table top is necessary.Some larger configurations requireattachment of support frame. Topsship with pre-drilled holes for frameattachment.

Connecting plate:For configurations using more thanone segment, tops must connectedusing connector plates (included inbox), inserted in pre-drilled holes.

Leveling: Drum baseAll Drums have leveling nuts toallow for irregularities in the floor.

Leveling: Peanut baseAll peanut bases have leveling glidesto allow for irregularities in the floor.

Electrical options:Compatible with shallow PlexusBoxes. All Drum/Peanut basesfeature internal wire managmenthooks. All tables with frames shipwith wire management C-clips.

Shipping:Tops, Drum/Peanut bases and framesare shipped separately. Drum andPeanut bases ship fully-assembled.Support frames, required for somelarger tables are shipped in a box.Tops are predrilled for frame or base.


48 49

Emanuela FrattiniPropellert Conference Table SeriesRound/Rounded, Square/Rectangular and Bullet Tables withDrum Base


description w d h base size

no. of

drums frame

table

weight

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge

veneer/wood edge

(AE, SE)

P3-DD Round table with drum base 489 28 1/29 S 1 N 142 P3-DD48 $4,617. $7,191. $6,593. $9,043. $9,498.

549 28 1/29 M 1 N 173 P3-DD54 $5,025. $7,788. $7,132. $9,683. $10,170.

609 28 1/29 L 1 N 202 P3-DD60 $5,156. $7,908. $7,439. $9,992. $10,493.

P3-MD Rounded square table with drumbase

489 28 1/29 M 1 N 160 P3-MD48 $5,019. $7,634. $7,975. $10,327. $10,846.

549 28 1/29 M 1 N 178 P3-MD54 $5,164. $7,947. $8,215. $10,641. $11,173.

609 28 1/29 L 1 N 209 P3-MD60 $5,296. $8,105. $8,624. $11,091. $11,644.

P3-ND Rounded rectangular table, withdrum base

609 489 28 1/29 M 1 N 181 P3-ND64 $5,246. $8,381. $8,743. $11,718. $12,304.

P3-BD Bullet table, with drum base 549 489 28 1/29 M 1 N 177 P3-BD62 $5,159. $8,907. $8,444. $10,706. $11,239.

609 489 28 1/29 M 1 N 186 P3-BD64 $5,165. $8,944. $8,468. $10,801. $11,339.

549 609 28 1/29 L 1 N 208 P3-BD82 $5,504. $9,495. $9,086. $11,249. $11,812.

609 609 28 1/29 L 1 N 220 P3-BD84 $5,508. $9,531. $9,111. $11,530. $12,106.

669 609 28 1/29 L 1 N 232 P3-BD86 $5,690. $9,890. $9,333. $11,795. $12,383.

Order Code

Example: P3-ND64-K-PE-GM-WKP3-ND64 609 x 489 Rounded

rectangular table

K Maple veneer top

PE Propeller edge profile

GM Center plexus

WK Maple veneer drum finish($979 upcharge)

Specify:

1. Pattern number2. Top finish selection3. Edgeband selection4. Edge profile option (veneer/wood

edge only)5. Grommet/Plexus cutout option6. Drum base finish (upcharge for

veneer drum)

Finishes



Veneer top/edge finishes:Brown Oak (suffix V427)Burnt Walnut (suffix V313)Chalk Oak (suffix V421)Ebonized Walnut (suffix D)Graphite Oak (suffix V513)Light Oak (suffix V423)Maple (suffix K)Natural Beech (suffix B)Old English Walnut (suffix V417)Ebonized Oak (suffix OE)



Grommet finishes:Anodized Aluminum (suffix A)

Drum Base Finishes:Perforated Aluminum (suffix A)

Veneer Drum Base Finishes (upchargeapplies)For veneer drum base finish, add letterW to the veneer finish code at the end ofthe pattern number (e.g. W-K for mapledrum finish) and add appropriateupcharge as listed below. Interior:fabricated sheet metal with black powdercoat finish.

1 base (small and medium) $8471 base (large) $1,018

Electrical


Grommet Option: ($49 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49 indiameter, see page 48 for details.Optional grommet-mounted powerreceptacles available, see page 100.

For no grommet: (suffix Y)For center grommet: (GG)For mid depth grommet, left and right:(AG)

Plexus Option: ($49 per cutout)Tables can be hardwired using pre-wiredor empty boxes, or plugged in withplexus boxes with cordset. Tables may bespecified with zero, one or two cutouts.All drum base can accommodate shallowmedium plexus boxes, 609 tables canalso accommodate double wide shallowmedium plexus boxes. To specify plexusbox and for more information, see pages92.

For no plexus: (suffix Y)For center plexus: (GM)For center double plexus: (GMD)

Features

Maintenance:See pages 10 .

Frame:Larger tables will incorporate a frameunder the table. Frame is an aluminumextrusion shipped with c-clips for wiremanagement. For tables without a frame,please see page 88 to specify C-clipsseperately.

Base Location:In most cases Drum bases will be locatedat the center of the table or segment -some exceptions arise on themulti-segment tables, where some drumsare shared between two segments.


AM and AMD are not appropriate forstand alone tables or end segments.


50 51

Emanuela FrattiniPropellert Conference Table SeriesRounded Two, Three and Four Segment Conference Tables withDrum Base



section

width,

outside

section

width,

inside base size

no. of

drums frame

table

wgt.

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-CD Rounded rectangular table, 2segments, with drum base

1089 489 28 1/29 549 S 2 N 324 P3-CD30 $9,750. $17,728. $16,142. $19,909. $20,904.

1209 489 28 1/29 609 S 2 N 342 P3-CD32 $9,759. $17,807. $16,178. $20,018. $21,018.

1329 489 28 1/29 669 S 2 N 362 P3-CD34 $9,944. $18,203. $16,423. $20,332. $21,352.

1449 489 28 1/29 729 S 2 Y 380 P3-CD36 $11,504. $19,750. $17,966. $22,001. $23,100.

1569 489 28 1/29 789 S 2 Y 398 P3-CD38 $11,813. $20,105. $18,290. $22,406. $23,525.

1689 489 28 1/29 849 S 2 Y 501 P3-CD40 $15,169. $23,334. $21,573. $25,862. $27,154.

1089 609 28 1/29 549 L 2 N 416 P3-CD50 $10,702. $18,709. $16,924. $20,749. $21,786.

1209 609 28 1/29 609 L 2 N 440 P3-CD52 $10,710. $18,793. $16,969. $20,864. $21,907.

1329 609 28 1/29 669 L 2 N 464 P3-CD54 $11,093. $19,555. $17,447. $21,426. $22,496.

1449 609 28 1/29 729 L 2 Y 486 P3-CD56 $12,660. $21,097. $19,003. $23,098. $24,253.

1569 609 28 1/29 789 L 2 Y 510 P3-CD58 $12,246. $20,782. $18,640. $22,792. $23,931.

1689 609 28 1/29 849 L 2 Y 534 P3-CD60 $12,383. $20,980. $18,807. $23,038. $24,188.

P3-FD Rounded rectangular table, 3segments, with drum base

1929 489 28 1/29 609 729 S 3 Y 538 P3-FD26 $17,755. $27,188. $27,059. $31,393. $32,964.

2049 489 28 1/29 729 609 S 3 Y 557 P3-FD30 $18,011. $28,813. $27,473. $32,425. $34,048.

2169 489 28 1/29 729 729 S 3 Y 576 P3-FD32 $18,326. $29,193. $27,849. $32,904. $34,551.

2289 489 28 1/29 789 729 S 3 Y 594 P3-FD34 $18,753. $29,700. $28,343. $33,498. $35,174.

2409 489 28 1/29 849 729 S 3 Y 614 P3-FD36 $18,788. $29,793. $28,451. $33,700. $35,385.

2529 489 28 1/29 909 729 S 3 Y 632 P3-FD38 $19,411. $30,457. $29,129. $34,493. $36,214.

1929 609 28 1/29 609 729 L 3 Y 689 P3-FD46 $19,191. $28,271. $28,554. $32,795. $34,430.

2049 609 28 1/29 729 609 L 3 Y 632 P3-FD50 $19,678. $31,662. $29,363. $34,539. $36,268.

2169 609 28 1/29 729 729 L 3 Y 737 P3-FD52 $19,988. $32,042. $29,755. $35,034. $36,786.

2289 609 28 1/29 789 729 L 3 Y 761 P3-FD54 $20,421. $32,557. $30,263. $35,646. $37,429.

2409 609 28 1/29 849 729 L 3 Y 785 P3-FD56 $20,462. $32,649. $30,384. $35,862. $37,657.

2529 609 28 1/29 909 729 L 3 Y 807 P3-FD58 $21,085. $33,329. $31,078. $36,670. $38,505.

Order Code

Example: P3-ED34-117-R5-AM-AM-A

P3-ED34 489 x 2889 Roundedrectangular table

117 Soft Grey laminate top

R5 Black edgeband

AM Medium plexus, left andright, segment A

AM Medium plexus, left andright, segment B

A Perforated drum anodizedfinish

Specify:






segment D9. Drum base finish (upcharge for

veneer drum)

Finishes







Drum Base finishes:Perforated Aluminum (suffix A)

Veneer Drum Base finishes: (upchargeapplies)For veneer drum base finish, add letterW to the veneer finish code at the end ofthe pattern number (e.g. W-K for mapledrum finish) and add appropriateupcharge as listed below. Interior:fabricated sheet metal with black powdercoat finish.

2 bases (small) $1,7642 bases (large) $2,1133 bases (small) $2,6463 bases (large) $2,1344 bases (small) $3,5284 bases (large) $4,231

Electrical


Grommet options: ($49 per cutout)Individual table segments may bespecified with zero, one or two grommets.All grommets are 3 1/49 in diameter.Grommet cover finish will always beAnodized Aluminum, see page 48 fordetails. Optional grommet-mountedpower receptacles available, see page100.


Plexus cutout options: ($49 per cutout)Tables can be hardwired using pre-wiredor empty boxes, or plugged in withplexus boxes with cordset. All drum basecan accomodate shallow medium plexusboxes, 609 tables can also accomodatedouble wide shallow medium plexusboxes. Individual table segments may bespecified with zero, one or two cutouts.To specify plexus box and for moreinformation, see pages 92.


Features


Frame:Larger tables will incorporate a frameunder the table. Frame is an aluminumextrusion and is shipped with C-clips forwire management. For tables without aframe, please see page 88 to specify clipsseperately.





52 53

Emanuela FrattiniPropellert Conference Table SeriesRounded Two, Three and Four Segment Conference Tables withDrum Base



section

width,

outside

section

width,

inside base size

no. of

drums frame

table

wgt.

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-ED Rounded rectangular table, 4segments, with drum base

2649 489 28 1/29 729 609 S 3 Y 651 P3-ED30 $21,707. $32,001. $35,178. $40,558. $42,585.

2769 489 28 1/29 789 609 S 3 Y 669 P3-ED32 $22,000. $32,355. $35,548. $41,037. $43,087.

2889 489 28 1/29 789 669 S 3 Y 687 P3-ED34 $22,040. $32,437. $35,680. $41,218. $43,283.

3009 489 28 1/29 849 669 S 4 Y 790 P3-ED36 $25,508. $39,549. $39,128. $45,352. $47,621.

3129 489 28 1/29 849 729 S 4 Y 810 P3-ED38 $25,625. $39,549. $39,333. $45,658. $47,941.

3249 489 28 1/29 909 729 S 4 Y 828 P3-ED40 $26,257. $40,424. $40,039. $46,476. $48,802.

2649 609 28 1/29 729 609 L 3 Y 830 P3-ED50 $22,557. $34,220. $36,424. $42,455. $44,580.

2769 609 28 1/29 789 609 L 3 Y 854 P3-ED52 $22,851. $34,578. $36,812. $42,950. $45,100.

2889 609 28 1/29 789 669 L 3 Y 878 P3-ED54 $22,895. $34,662. $36,958. $43,198. $45,358.

3009 609 28 1/29 849 669 L 4 Y 1012 P3-ED56 $26,370. $41,825. $40,421. $46,877. $49,218.

3129 609 28 1/29 849 729 L 4 Y 1036 P3-ED58 $26,487. $42,025. $40,643. $47,200. $49,560.

3249 609 28 1/29 909 729 L 4 Y 1058 P3-ED60 $27,118. $42,717. $41,360. $48,034. $50,440.

Order Code

Example: P3-ED34-117-R5-AM-AM-A

P3-ED34 489 x 2889 Roundedrectangular table

117 Soft Grey laminate top

R5 Black edgeband

AM Medium plexus, left andright, segment A

AM Medium plexus, left andright, segment B

A Perforated drum anodizedfinish

Specify:






segment D9. Drum base finish (upcharge for

veneer drum)

Finishes







Drum Base finishes:Perforated Aluminum (suffix A)


2 bases (small) $1,7642 bases (large) $2,1133 bases (small) $2,6463 bases (large) $2,1344 bases (small) $3,5284 bases (large) $4,231

Electrical






Features


Frame:Larger tables will incorporate a frameunder the table. Frame is an aluminumextrusion and is shipped with C-clips forwire management. For tables without aframe, please see page 88 to specify clipsseperately.





54 55

Emanuela FrattiniPropellert Conference Table SeriesSquare/Rectangular Conference Tables with Square/RectangularDrum Base

Designer(s):Emanuela Frattini

description

overall

width d h base size

no. of

drums frame

table

weight

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge

veneer/wood edge

(AE/SE

P3-SS Square table, with square drum base 489 489 28 1/29 M 1 N 173 P3-SS48 $4,353. $6,222. $6,470. $7,729. $7,961.

549 549 28 1/29 M 1 N 193 P3-SS54 $4,506. $6,602. $6,901. $8,271. $8,530.

609 609 28 1/29 L 1 N 227 P3-SS60 $4,676. $6,834. $7,208. $8,628. $8,894.

P3-RS Rectangular table, with square drumbase

549 489 28 1/29 M 1 N 182 P3-RS62 $4,443. $6,709. $7,278. $8,497. $8,765.

609 489 28 1/29 M 1 N 192 P3-RS64 $4,451. $6,738. $7,306. $8,546. $8,811.

489 609 28 1/29 L 1 N 204 P3-RS80 $4,608. $6,901. $7,478. $8,710. $8,977.

549 609 28 1/29 L 1 N 215 P3-RS82 $4,774. $7,256. $7,757. $9,026. $9,311.

P3-RR Rectangular table, with rectangulardrum base

729 489 28 1/29 S 1 Y 226 P3-RR68 $4,777. $7,277. $7,685. $8,999. $9,280.

849 489 28 1/29 M 1 Y 267 P3-RR72 $6,745. $9,311. $9,810. $11,204. $11,500.

729 609 28 1/29 L 1 Y 270 P3-RR88 $5,368. $8,112. $8,426. $9,803. $10,106.

849 609 28 1/29 XL 1 Y 319 P3-RR92 $7,420. $10,225. $10,726. $12,185. $12,504.

Order Code

Example: P3-SS54-V417-SE-Y-WV417

P3-SS54 549 x 549 Square table withsquare drum base

V417 Old English Walnut veneertop

SE Saarinen edge detail

Y No grommet/plexus cutout

WV417 Old English Walnut veneerdrum finish

Example:

1. Pattern number2. Top finish selection3. Edgeband profile4. Edge profile option (veneer/wood


segment A6. Drum base finish (upcharge for

veneer drum)

Finishes







Drum Base finishes:Aluminum (suffix A)


Square Drum Base:1 base (medium) $1,0361 base (large) $1,197

Rectangular Drum Base:1 base (small) $1,3781 base (medium) $1,3541 base (large) $1,4221 base (x-large) $1,513

Electrical






Features


Frame:Larger tables will incorporate a frameunder the table. Frame is an aluminumextrusion and is shipped with C-clips forwire management. For tables without aframe, please see page 88 to specify clipsseparately.





56 57

Emanuela FrattiniPropellert Conference Table SeriesRectangular Two, Three and Four Segment Conference Tableswith Square Drum Base


description

overall

width d h

section

width,

outside

section

width,

inside base size

no. of

drums frame

table

weight

(lbs.) pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-SS Rectangular table, 2 segments, withsquare drum base

1089 489 28 1/29 549 S 2 N 334 P3-SS30 $8,551. $13,064. $14,229. $16,645. $17,178.

1209 489 28 1/29 609 S 2 N 354 P3-SS32 $8,551. $13,138. $14,262. $16,754. $17,288.

1329 489 28 1/29 669 S 2 N 372 P3-SS34 $8,806. $13,728. $14,590. $17,164. $17,718.

1449 489 28 1/29 729 S 2 Y 392 P3-SS36 $10,455. $15,462. $16,267. $18,897. $19,457.

1089 609 28 1/29 549 L 2 N 430 P3-SS50 $9,551. $14,515. $15,521. $18,070. $18,630.

1209 609 28 1/29 609 L 2 N 454 P3-SS52 $9,339. $13,674. $14,413. $17,255. $17,782.

1329 609 28 1/29 669 L 2 N 478 P3-SS53 $9,879. $15,308. $15,974. $18,670. $19,268.

1449 609 28 1/29 729 L 2 Y 502 P3-SS56 $11,543. $17,048. $17,672. $20,416. $21,018.

P3-TS Rectangular table, 3 segments, withsquare drum base

1569 489 28 1/29 549 489 S 2 Y 409 P3-TS30 $11,551. $17,924. $19,336. $23,018. $23,772.

1689 489 28 1/29 609 489 S 2 Y 494 P3-TS32 $11,701. $18,158. $19,527. $23,279. $24,040.

1809 489 28 1/29 609 609 S 3 N 549 P3-TS34 $12,823. $19,706. $21,397. $25,128. $25,929.

1929 489 28 1/29 669 609 S 3 N 549 P3-TS36 $13,078. $20,301. $21,726. $25,537. $26,360.

2049 489 28 1/29 729 609 S 3 Y 569 P3-TS38 $15,666. $22,964. $24,346. $28,214. $29,038.

2169 489 28 1/29 729 729 S 3 Y 588 P3-TS40 $16,009. $23,520. $24,738. $28,681. $29,517.

1569 609 28 1/29 549 489 L 2 Y 524 P3-TS50 $12,631. $19,897. $21,478. $25,251. $26,078.

1689 609 28 1/29 609 489 L 2 Y 548 P3-TS52 $12,577. $19,206. $20,528. $24,594. $25,388.

1809 609 28 1/29 609 609 L 3 N 705 P3-TS54 $14,009. $20,499. $21,631. $25,880. $26,668.

1929 609 28 1/29 669 609 L 3 N 705 P3-TS56 $14,549. $22,142. $23,183. $27,299. $28,155.

2049 609 28 1/29 729 609 L 3 Y 669 P3-TS58 $17,159. $24,821. $25,815. $29,988. $30,846.

2169 609 28 1/29 729 729 L 3 Y 753 P3-TS60 $17,645. $25,901. $26,840. $30,962. $31,858.

P3-VS Rectangular table, 4 segments, withsquare drum base

2289 489 28 1/29 609 549 S 3 Y 605 P3-VS30 $17,425. $26,523. $28,809. $33,727. $34,788.

2409 489 28 1/29 609 609 S 3 Y 625 P3-VS32 $17,431. $26,599. $28,845. $33,830. $34,899.

2529 489 28 1/29 669 609 S 3 Y 643 P3-VS34 $17,951. $27,456. $29,442. $34,507. $35,595.

2649 489 28 1/29 669 669 S 3 Y 765 P3-VS36 $18,204. $28,050. $29,771. $34,918. $36,027.

2769 489 28 1/29 729 669 S 3 Y 681 P3-VS38 $18,521. $28,440. $30,114. $35,323. $36,432.

2889 489 28 1/29 729 729 S 3 Y 701 P3-VS40 $18,527. $28,522. $30,146. $35,424. $36,540.

2289 609 28 1/29 609 549 L 3 Y 774 P3-VS50 $18,670. $27,332. $28,826. $34,496. $35,541.

2409 609 28 1/29 609 609 L 3 Y 798 P3-VS52 $18,882. $28,174. $29,926. $35,310. $36,396.

2529 609 28 1/29 669 609 L 3 Y 822 P3-VS54 $19,479. $29,238. $30,646. $36,181. $37,300.

2649 609 28 1/29 669 669 L 3 Y 846 P3-VS56 $20,020. $30,880. $32,200. $37,595. $38,787.

2769 609 28 1/29 729 669 L 3 Y 870 P3-VS58 $20,351. $31,276. $32,562. $38,009. $39,206.

2889 609 28 1/29 729 729 L 3 Y 894 P3-VS60 $20,362. $31,364. $32,610. $38,109. $39,308.

Order Code

Example: P3-SS30-V421-R5-GM-GM-WV421

P3-SS30 489 x 1089 rect. table

V421 Chalk Oak veneer top

R5 Black edgeband

GM Medium plexus, left andright, mid-depth, segment A

GM Medium plexus, left andright, mid-depth, segment B

WV421 Chalk Oak veneer drumfinish (upchg. applies)

Specify:




segment B7. Drum base finish (upcharge for

veneer drum)

Finishes



Veneer top/edge finishes:Brown Oak (suffix V427)Burnt Walnut (suffix V313)Chalk Oak (suffix V421)Ebonized Walnut (suffix D)Graphite Oak (suffix V513)Light Oak (suffix V423)Maple (suffix K)Natural Beech (suffix B)

Veneer top/edge finishes continued:Old English Walnut (suffix V417)Warm Brown Walnut (suffix J)American Walnut (suffix AW)Natural Oak (suffix ON)Fumed Oak (suffix OF)Ebonized Oak (suffix OE)


Flat edgeband finishes:Black (suffix 111T)Mink (suffix 324T)Innertone (suffix 386T)Platinum (suffix 367T)Folkstone (suffix 004T)Bright White (suffix 118T)

Molded edgeband finishes continued:Folkstone (suffix 004)Light Grey (suffix 4)Medium Grey (suffix 5)

Grommet finishes:Anodized Aluminum (suffix A) DrumBase finishes:Aluminum (suffix A)


2 bases (small) $2,1362 bases (large) $2,4653 bases (small) $3,2033 bases (large) $3,696

Electrical



No grommet (Y)Single grommet, center (GG)Two grommets, left & right (AG)Single grommet, side (BG)



Features


Frame:Larger tables will incorporate a frameunder the table. Frame shipswith C-clips for wire mangement. Fortables without a frame, please see page88 to specify clips seperately.





58 59

Emanuela FrattiniPropellert Conference Table SeriesBullet, Rounded and Rectangular Conference Tables with PeanutBase


description w d h frame no. of bases pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-BP Bullet table, with peanut base 789 429 28 1/29 N 2 P3-BP50 $5,930. $9,863. $9,111. $11,545. $12,125.

849 429 28 1/29 N 2 P3-BP52 $5,934. $9,899. $9,128. $11,597. $12,175.

909 429 28 1/29 N 2 P3-BP54 $5,942. $9,935. $9,236. $11,740. $12,328.

969 429 28 1/29 N 2 P3-BP56 $5,947. $9,973. $9,253. $11,792. $12,381.

789 489 28 1/29 N 2 P3-BP70 $5,934. $9,886. $9,367. $11,832. $12,422.

849 489 28 1/29 N 2 P3-BP72 $5,942. $9,923. $9,390. $11,879. $12,475.

909 489 28 1/29 N 2 P3-BP74 $5,947. $9,960. $9,548. $12,076. $12,683.

969 489 28 1/29 N 2 P3-BP76 $5,951. $9,999. $9,569. $12,128. $12,733.

969 609 28 1/29 N 2 P3-BP96 $6,212. $10,546. $10,168. $12,812. $13,451.

P3-NP Rounded rectangular table, withpeanut base

789 429 28 1/29 N 2 P3-NP50 $5,874. $9,226. $9,614. $12,719. $13,357.

849 429 28 1/29 N 2 P3-NP52 $5,879. $9,262. $9,629. $12,769. $13,408.

909 429 28 1/29 N 2 P3-NP54 $5,880. $9,301. $9,843. $13,023. $13,674.

969 429 28 1/29 N 2 P3-NP56 $5,886. $9,336. $9,859. $13,070. $13,725.

789 489 28 1/29 N 2 P3-NP70 $5,878. $9,229. $9,639. $12,742. $13,382.

849 489 28 1/29 N 2 P3-NP72 $5,882. $9,265. $9,657. $12,794. $13,434.

909 489 28 1/29 N 2 P3-NP74 $5,886. $9,304. $9,875. $13,050. $13,700.

969 489 28 1/29 N 2 P3-NP76 $5,893. $9,340. $9,894. $13,102. $13,757.

969 609 28 1/29 N 2 P3-NP96 $6,127. $9,764. $10,313. $13,525. $14,201.

P3-RP Rectangular table, with peanut base 789 429 28 1/29 N 2 P3-RP50 $5,635. $7,846. $8,264. $9,948. $10,444.

849 429 28 1/29 N 2 P3-RP52 $5,642. $7,883. $8,505. $10,252. $10,763.

909 429 28 1/29 N 2 P3-RP54 $5,649. $7,919. $8,521. $10,298. $10,814.

969 429 28 1/29 N 2 P3-RP56 $5,652. $7,958. $8,539. $10,350. $10,870.

789 489 28 1/29 N 2 P3-RP70 $5,642. $7,874. $8,516. $10,244. $10,758.

849 489 28 1/29 N 2 P3-RP72 $5,649. $7,910. $8,668. $10,450. $10,973.

909 489 28 1/29 N 2 P3-RP74 $5,654. $7,950. $8,686. $10,506. $11,030.

969 489 28 1/29 N 2 P3-RP76 $5,658. $7,986. $8,707. $10,558. $11,085.

969 609 28 1/29 N 2 P3-RP96 $5,878. $8,457. $9,187. $11,134. $11,692.

Order Code

Example: P3-BP52-118-118-Y-AP3-BP52 849 x 429 Rectangular table

118 Bright White laminate top

118 Bright White edgeband

Y No grommet

A Anodized aluminum base

Specify:


edge only)5. Grommet/Plexus cutout option6. Peanut base selection

Finishes



Veneer top/edge finishes:Brown Oak (suffix V427)Burnt Walnut (suffix V313)Chalk Oak (suffix V421)Ebonized Walnut (suffix D)Graphite Oak (suffix V513)Light Oak (suffix V423)Maple (suffix K)Natural Beech (suffix B)Old English Walnut (suffix V417)Warm Brown Walnut (suffix J)

Veneer top/edge finishes continued:American Walnut (suffix AW)Natural Oak (suffix ON)Fumed Oak (suffix OF)Ebonized Oak (suffix OE)




Peanut Base finishes:Perforated Aluminum (suffix A)

Veneer Peanut Base finishes: (upchargeapplies)For veneer peanut base finish, add letterW to the veneer finish code at the end ofthe pattern number (e.g. W-K for maplepeanut base finish) and add appropriateupcharge as listed below. Interior:fabricated sheet metal with black powdercoat finish.

2 bases $4,190

Electrical


Grommet options: ($49 per cutout)Tables may be specified with zero, one ortwo grommets. All grommets are 3 1/49 indiameter. Grommet cover finish willalways be Anodized Aluminum, seepage 48 for details. Optionalgrommet-mounted power receptaclesavailable, see page 100.

No grommet (Y)Single grommet, center (GG)Two grommets, left & right (AG)Single grommet, side (BG)Single grommet, right, mid-depth (HG)

Plexus cutout options: ($49 per cutout)Tables can be hardwired using pre-wiredor empty boxes, or plugged in withplexus boxes with cordset. All drum baseand peanut tables can accomodateshallow medium plexus boxes, 609 tablescan also accomodate double wideshallow medium plexus boxes. Tablesmay be specified with zero, one or twocutouts. To specify plexus box and formore information, see pages 92.


Note:- Double Plexus AMD and GMDconfigurations not available on 429 deeptables.

Features

Maintenance:See pages 10

Frame:Larger tables will incorporate a frameunder the table. Frame is an aluminumextrusion that includes C-clips for wiremanagement. For tables without a frame,please see page 88 to specify C-clipsseparately.

Base Location:For stand alone tables, two peanut baseswill be located 209 from the edge of thetable. On multi-segment tables, thepeanut base is located at the center ofeach segment except on certain foursegment tables, where some peanut basesare shared between two segments.

Please note that on 429 deep tables withpeanut base, the knee space dimensionimmediately in front of the base is 7 1/29from the edge.




60 61

Emanuela FrattiniPropellert Conference Table SeriesRounded Two, Three and Four Segment Conference Tables withPeanut Base


description

overall

w d h

section

width,

outside

section

width,

inside frame

no. of

bases pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-CP Rounded rectangular table, 2segments, with peanut base

1089 429 28 1/29 549 Y 2 P3-CP10 $8,589. $16,617. $14,984. $18,699. $19,634.

1209 429 28 1/29 609 Y 2 P3-CP12 $8,598. $16,698. $15,024. $18,805. $19,745.

1329 429 28 1/29 669 Y 2 P3-CP14 $9,120. $17,410. $15,584. $19,453. $20,432.

1449 429 28 1/29 729 Y 2 P3-CP16 $9,131. $17,488. $15,623. $19,561. $20,538.

1569 429 28 1/29 789 Y 2 P3-CP18 $9,437. $17,845. $15,942. $19,963. $20,960.

1689 429 28 1/29 849 Y 3 P3-CP20 $12,065. $20,387. $18,514. $22,686. $23,820.

1809 429 28 1/29 909 Y 3 P3-CP22 $12,223. $20,603. $18,692. $22,937. $24,085.

1089 489 28 1/29 549 Y 2 P3-CP30 $8,598. $16,647. $15,028. $18,758. $19,698.

1209 489 28 1/29 609 Y 2 P3-CP32 $8,608. $16,726. $15,068. $18,870. $19,811.

1329 489 28 1/29 669 Y 2 P3-CP34 $9,130. $17,441. $15,635. $19,523. $20,500.

1449 489 28 1/29 729 Y 2 P3-CP36 $9,142. $17,521. $15,675. $19,634. $20,614.

1569 489 28 1/29 789 Y 2 P3-CP38 $9,446. $17,879. $16,002. $20,039. $21,041.

1689 489 28 1/29 849 Y 3 P3-CP40 $12,075. $20,419. $18,578. $22,764. $23,904.

1809 489 28 1/29 909 Y 3 P3-CP42 $12,232. $20,639. $18,755. $23,022. $24,174.

1089 609 28 1/29 549 Y 2 P3-CP50 $8,831. $16,954. $15,114. $18,880. $19,823.

1209 609 28 1/29 609 Y 2 P3-CP52 $8,839. $17,033. $15,165. $19,000. $19,947.

1329 609 28 1/29 669 Y 2 P3-CP54 $9,562. $18,116. $15,964. $19,897. $20,892.

1449 609 28 1/29 729 Y 2 P3-CP56 $9,574. $18,195. $16,014. $20,014. $21,012.

1569 609 28 1/29 789 Y 2 P3-CP58 $9,880. $18,555. $16,347. $20,430. $21,447.

1689 609 28 1/29 849 Y 3 P3-CP60 $12,509. $21,097. $18,930. $23,163. $24,321.

1809 609 28 1/29 909 Y 3 P3-CP62 $12,667. $21,317. $19,118. $23,426. $24,599.

P3-FP Rounded rectangular table, 3segments, with peanut base

1929 429 28 1/29 609 729 Y 3 P3-FP06 $14,293. $24,088. $23,784. $27,912. $29,306.

2049 429 28 1/29 729 609 Y 3 P3-FP10 $14,558. $25,556. $23,860. $28,678. $30,113.

2169 429 28 1/29 729 729 Y 3 P3-FP12 $14,977. $25,932. $24,335. $29,150. $30,605.

2289 429 28 1/29 789 729 Y 3 P3-FP14 $15,402. $26,437. $24,819. $29,735. $31,222.

2409 429 28 1/29 849 729 Y 3 P3-FP16 $15,437. $26,525. $24,920. $29,927. $31,422.

Order Code

Example: P3-CP10-K-SE-GM-GM-WK

P3-CP10 1089 x 429 rounded rect.table

K Maple veneer top


GM Medium plexus, center,mid-depth, segment A

GM Medium plexus, center,mid-depth, segment B

WK Maple veneer base(upcharge applies)

Specify:






segment D9. Peanut base selection










2 bases $4,1903 bases $6,2894 bases $8,382

Electrical




Plexus cutout options: ($49 per cutout)Tables can be hardwired using pre-wiredor empty boxes, or plugged in withplexus boxes with cordset. All drum baseand peanut base tables can accommodateshallow medium plexus boxes, 609 tablescan also accommodate double wideshallow medium plexus boxes. Individualtable segments may be specified withzero, one or two cutouts. To specifyplexus box and for more information, seepages 92.


Note:- Double Plexus AMD and GMDconfigurations not available on 429 and489 deep tables.

Features


Frame:Larger tables will incorporate a frameunder the table. Frame is an aluminumextrusion that includes c-clips for wiremanagement. For tables without a frame,please see page 88 to specify C-clipsseperately.


Please note on 429 deep tables withpeanut base, the knee space dimensionimmediately in front of the base is 7 1/29from the edge.




62 63



description

overall

w d h

section

width,

outside

section

width,

inside frame

no. of

bases pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-FP Rounded rectangular table, 3segments, with peanut base

2529 429 28 1/29 909 729 Y 3 P3-FP18 $16,060. $27,194. $25,598. $30,711. $32,246.

1929 489 28 1/29 609 729 Y 3 P3-FP26 $14,529. $24,152. $23,936. $28,167. $29,576.

2049 489 28 1/29 729 609 Y 3 P3-FP30 $14,786. $25,784. $24,348. $29,197. $30,656.

2169 489 28 1/29 729 729 Y 3 P3-FP32 $15,099. $26,157. $24,730. $29,677. $31,163.

2289 489 28 1/29 789 729 Y 3 P3-FP34 $15,527. $26,666. $25,221. $30,272. $31,784.

2409 489 28 1/29 849 729 Y 3 P3-FP36 $15,560. $26,759. $25,329. $30,477. $31,999.

2529 489 28 1/29 909 729 Y 3 P3-FP38 $16,187. $27,426. $26,006. $31,266. $32,828.

1929 609 28 1/29 609 729 Y 3 P3-FP46 $14,889. $24,228. $24,391. $28,492. $29,916.

2049 609 28 1/29 729 609 Y 3 P3-FP50 $15,375. $27,612. $25,200. $30,238. $31,751.

2169 609 28 1/29 729 729 Y 3 P3-FP52 $15,688. $27,996. $25,594. $30,732. $32,266.

2289 609 28 1/29 789 729 Y 3 P3-FP54 $16,119. $28,512. $26,098. $31,345. $32,910.

2409 609 28 1/29 849 729 Y 3 P3-FP56 $16,157. $28,605. $26,217. $31,560. $33,139.

2529 609 28 1/29 909 729 Y 3 P3-FP58 $16,782. $29,279. $26,915. $32,369. $33,989.

P3-EP Rounded rectangular table, 4segments, with peanut base

2649 429 28 1/29 729 609 Y 3 P3-EP10 $18,286. $28,685. $31,452. $36,581. $38,407.

2769 429 28 1/29 789 609 Y 3 P3-EP12 $18,580. $29,039. $31,819. $37,053. $38,902.

2889 429 28 1/29 789 669 Y 3 P3-EP14 $18,619. $29,121. $31,943. $37,229. $39,087.

3009 429 28 1/29 849 669 Y 3 P3-EP16 $20,578. $34,768. $33,927. $39,366. $41,336.

3129 429 28 1/29 849 729 Y 4 P3-EP18 $20,694. $34,962. $34,124. $39,620. $41,599.

3249 429 28 1/29 909 729 Y 4 P3-EP20 $20,734. $35,092. $34,249. $39,839. $41,830.

2649 489 28 1/29 729 609 Y 3 P3-EP30 $18,483. $28,967. $32,053. $37,333. $39,201.

2769 489 28 1/29 789 609 Y 3 P3-EP32 $18,774. $29,323. $32,427. $37,810. $39,700.

2889 489 28 1/29 789 669 Y 3 P3-EP34 $18,814. $29,400. $32,557. $37,993. $39,893.

3009 489 28 1/29 849 669 Y 4 P3-EP36 $20,775. $35,096. $34,547. $40,617. $42,648.

3129 489 28 1/29 849 729 Y 4 P3-EP38 $20,892. $35,290. $34,751. $40,921. $42,969.

3249 489 28 1/29 909 729 Y 4 P3-EP40 $20,932. $35,417. $34,881. $41,154. $43,214.

2649 609 28 1/29 729 609 Y 3 P3-EP50 $19,333. $31,182. $33,304. $39,229. $41,191.

Order Code



K Maple veneer top





Specify:

















Electrical







Features








64 65



description

overall

w d h

section

width,

outside

section

width,

inside frame

no. of

bases pattern no.

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-EP Rounded rectangular table, 4segments, with peanut base

2769 609 28 1/29 789 609 Y 3 P3-EP52 $19,624. $31,541. $33,690. $39,725. $41,713.

2889 609 28 1/29 789 669 Y 3 P3-EP54 $19,670. $31,628. $33,833. $39,973. $41,974.

3009 609 28 1/29 849 669 Y 4 P3-EP56 $21,635. $37,370. $35,838. $42,143. $44,248.

3129 609 28 1/29 849 729 Y 4 P3-EP58 $21,753. $37,570. $36,057. $42,467. $44,589.

3249 609 28 1/29 909 729 Y 4 P3-EP60 $21,794. $37,704. $36,204. $42,717. $44,853.

Order Code



K Maple veneer top





Specify:

















Electrical







Features








66 67

Emanuela FrattiniPropellert Conference Table SeriesRectangular Two, Three and Four Segment Conference Tableswith Peanut Base


description w d h

section

width,

outside

section

width,

inside frame

no. of

bases pattern no

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-SP Rectangular table, 2 segments, withpeanut base

1089 429 28 1/29 549 Y 2 P3-SP10 $8,351. $12,625. $13,397. $16,379. $17,200.

1209 429 28 1/29 609 Y 2 P3-SP12 $8,448. $12,700. $13,431. $16,484. $17,308.

1329 429 28 1/29 669 Y 2 P3-SP14 $8,864. $13,846. $14,097. $17,267. $18,128.

1449 429 28 1/29 729 Y 2 P3-SP16 $9,047. $14,260. $14,504. $17,868. $18,760.

1089 489 28 1/29 549 Y 2 P3-SP30 $8,360. $12,674. $13,891. $16,971. $17,820.

1209 489 28 1/29 609 Y 2 P3-SP32 $8,461. $12,751. $13,928. $17,078. $17,930.

1329 489 28 1/29 669 Y 2 P3-SP34 $8,869. $13,896. $14,598. $17,862. $18,754.

1449 489 28 1/29 729 Y 2 P3-SP36 $8,933. $13,978. $14,636. $17,967. $18,867.

1089 609 28 1/29 549 Y 2 P3-SP50 $8,782. $13,647. $14,590. $17,896. $18,790.

1209 609 28 1/29 609 Y 2 P3-SP52 $9,270. $14,662. $15,014. $18,441. $19,361.

1329 609 28 1/29 669 Y 2 P3-SP54 $9,636. $15,028. $15,400. $18,841. $19,782.

1449 609 28 1/29 729 Y 2 P3-SP56 $9,709. $15,157. $15,492. $19,020. $19,973.

P3-TP Rectangular table, 3 segments, withpeanut base

1569 429 28 1/29 549 489 Y 2 P3-TP10 $10,450. $16,907. $18,200. $22,632. $23,765.

1689 429 28 1/29 609 489 Y 2 P3-TP12 $10,671. $17,102. $18,357. $22,863. $24,004.

1809 429 28 1/29 609 609 Y 3 P3-TP14 $13,136. $19,507. $20,616. $25,229. $26,489.

1929 429 28 1/29 669 609 Y 3 P3-TP16 $13,386. $20,502. $21,133. $25,850. $27,142.

2049 429 28 1/29 729 609 Y 3 P3-TP18 $13,448. $20,566. $21,185. $25,971. $27,272.

2169 429 28 1/29 729 729 Y 3 P3-TP20 $13,790. $21,271. $21,658. $26,535. $27,862.

1569 489 28 1/29 549 489 Y 2 P3-TP30 $10,561. $17,186. $18,956. $23,537. $24,714.

1689 489 28 1/29 609 489 Y 2 P3-TP32 $10,789. $17,389. $19,126. $23,785. $24,974.

1809 489 28 1/29 609 609 Y 3 P3-TP34 $13,162. $19,616. $21,404. $26,171. $27,479.

1929 489 28 1/29 669 609 Y 3 P3-TP36 $13,419. $20,635. $21,934. $26,818. $28,159.

2049 489 28 1/29 729 609 Y 3 P3-TP38 $13,483. $20,724. $21,987. $26,941. $28,288.

2169 489 28 1/29 729 729 Y 3 P3-TP40 $13,830. $21,458. $22,461. $27,519. $28,893.

1569 609 28 1/29 549 489 Y 2 P3-TP50 $11,264. $18,789. $20,183. $25,141. $26,394.

1689 609 28 1/29 609 489 Y 2 P3-TP52 $11,896. $19,973. $20,767. $25,852. $27,144.

1809 609 28 1/29 609 609 Y 3 P3-TP54 $14,476. $22,739. $23,279. $28,543. $29,969.

1929 609 28 1/29 669 609 Y 3 P3-TP56 $14,688. $22,979. $23,535. $28,819. $30,260.

2049 609 28 1/29 729 609 Y 3 P3-TP58 $14,775. $23,141. $23,659. $29,046. $30,500.

2169 609 28 1/29 729 729 Y 3 P3-TP60 $15,098. $23,472. $23,986. $29,425. $30,897.

Order Code

Example: P3-TP10-K-AE-GM-GM-WK

P3-TP10 156 x 429 rounded rect.table

K Maple veneer top

AE Autostrada edge detail


AM Medium plexus, left andright, mid-depth, segment B

GM Medium plexus, center,mid-depth, segment C


Specify:







Finishes



Veneer top/edge finishes:Brown Oak (suffix V427)Burnt Walnut (suffix V313)Chalk Oak (suffix V421)Ebonized Walnut (suffix D)Graphite Oak (suffix V513)Light Oak (suffix V423)Maple (suffix K)Natural Beech (suffix B)Old English Walnut (suffix V417)Warm Brown Walnut (suffix J)American Walnut (suffix AW)

Veneer top/edge finishes continued:Natural Oak (suffix ON)Fumed Oak (suffix OF)Ebonized Oak (suffix OE)





Veneer Peanut Base finishes: (upchargeapplies)For veneer peanut base finish, add letterW to the veneer finish code at the end ofthe pattern number (e.g. W-K for maplepeanut base finish) and add appropriateupcharge as listed below. Interior-fabricated sheet metal with black powdercoat finish.

2 bases $4,1903 bases $6,289

Electrical




Plexus cutout options: ($49 per cutout)Tables can be hardwired using pre-wiredor empty boxes, or plugged in withplexus boxes with cordset. All drum baseand peanut tables can accomodateshallow medium plexus boxes, 609 tablescan also accomodate double wideshallow medium plexus boxes. Individualtable segments may be specified withzero, one or two cutouts. To specifyplexus box and for more information, seepages 92.



Features


Frame:Larger tables will incorporate a frameunder the table. Frame is an aluminumextrusion that includes C-clips for wiremanagement. For tables without a frame,please see page 88 to specify clipsseperately.






68 69

Emanuela FrattiniPropellert Conference Table SeriesRectangular Two, Three and Four Segment Conference Tableswith Peanut Base


description w d h

section

width,

outside

section

width,

inside frame

no. of

bases pattern no

laminate/

flat edge

laminate/

wood edge

veneer/

flat edge

veneer/

wood edge (PE)

veneer/wood edge

(AE, SE)

P3-VP Rectangular table, 4 segments, withpeanut base

2289 429 28 1/29 609 549 Y 3 P3-VP10 $15,477. $24,101. $25,570. $31,580. $33,159.

2409 429 28 1/29 609 609 Y 3 P3-VP12 $15,592. $24,206. $25,639. $31,727. $33,312.

2529 429 28 1/29 669 609 Y 3 P3-VP14 $16,282. $25,657. $26,619. $32,853. $34,499.

2649 429 28 1/29 669 669 Y 3 P3-VP16 $16,372. $26,525. $26,992. $33,349. $35,017.

2769 429 28 1/29 729 669 Y 3 P3-VP18 $16,692. $26,888. $27,327. $33,772. $35,458.

2889 429 28 1/29 729 729 Y 3 P3-VP20 $16,761. $26,950. $27,420. $33,941. $35,638.

2289 489 28 1/29 609 549 Y 3 P3-VP30 $15,606. $24,476. $26,876. $33,182. $34,842.

2409 489 28 1/29 609 609 Y 3 P3-VP32 $15,715. $24,588. $26,944. $33,335. $35,002.

2529 489 28 1/29 669 609 Y 3 P3-VP34 $16,397. $26,025. $27,903. $34,429. $36,152.

2649 489 28 1/29 669 669 Y 3 P3-VP36 $16,487. $26,910. $28,289. $34,940. $36,687.

2769 489 28 1/29 729 669 Y 3 P3-VP38 $16,806. $27,257. $28,605. $35,350. $37,118.

2889 489 28 1/29 729 729 Y 3 P3-VP40 $16,877. $27,373. $28,681. $35,508. $37,285.

2289 609 28 1/29 609 549 Y 3 P3-VP50 $16,998. $27,788. $29,073. $36,029. $37,834.

2409 609 28 1/29 609 609 Y 3 P3-VP52 $17,521. $28,884. $29,555. $36,644. $38,477.

2529 609 28 1/29 669 609 Y 3 P3-VP54 $18,155. $29,529. $30,223. $37,355. $39,224.

2649 609 28 1/29 669 669 Y 3 P3-VP56 $18,198. $29,618. $30,321. $37,478. $39,349.

2769 609 28 1/29 729 669 Y 3 P3-VP58 $18,540. $30,029. $30,700. $37,965. $39,865.

2889 609 28 1/29 729 729 Y 3 P3-VP60 $18,630. $30,200. $30,834. $38,212. $40,122.

Order Code

Example: P3-TP10-K-AE-GM-GM-WK

P3-TP10 156 x 429 rounded rect.table

K Maple veneer top

AE Autostrada edge detail


AM Medium plexus, left andright, mid-depth, segment B

GM Medium plexus, center,mid-depth, segment C


Specify:







Finishes



Veneer top/edge finishes:Brown Oak (suffix V427)Burnt Walnut (suffix V313)Chalk Oak (suffix V421)Ebonized Walnut (suffix D)Graphite Oak (suffix V513)Light Oak (suffix V423)Maple (suffix K)Natural Beech (suffix B)Old English Walnut (suffix V417)Warm Brown Walnut (suffix J)American Walnut (suffix AW)

Veneer top/edge finishes continued:Natural Oak (suffix ON)Fumed Oak (suffix OF)Ebonized Oak (suffix OE)





Veneer Peanut Base finishes: (upchargeapplies)For veneer peanut base finish, add letterW to the veneer finish code at the end ofthe pattern number (e.g. W-K for maplepeanut base finish) and add appropriateupcharge as listed below. Interior-fabricated sheet metal with black powdercoat finish.

2 bases $4,1903 bases $6,289

Electrical




Plexus cutout options: ($49 per cutout)Tables can be hardwired using pre-wiredor empty boxes, or plugged in withplexus boxes with cordset. All drum baseand peanut tables can accomodateshallow medium plexus boxes, 609 tablescan also accomodate double wideshallow medium plexus boxes. Individualtable segments may be specified withzero, one or two cutouts. To specifyplexus box and for more information, seepages 92.



Features


Frame:Larger tables will incorporate a frameunder the table. Frame is an aluminumextrusion that includes C-clips for wiremanagement. For tables without a frame,please see page 88 to specify clipsseperately.






70 71

Emanuela FrattiniPropellert AccessoriesPrivacy and Modesty Screens with Fabric or Perforated MetalInterior


description w d h pattern no. screen fabric metal (add suffix -M)

P2-SC 119 high screen 22 1/29 19 119 P2-SC2411-( ) $428. $683.

28 1/29 19 119 P2-SC3011-( ) $467. $760.

34 1/29 19 119 P2-SC3611-( ) $505. $838.

40 1/29 19 119 P2-SC4211-( ) $564. $917.

46 1/29 19 119 P2-SC4811-( ) $613. $1,032.

58 1/29 19 119 P2-SC6011-( ) $722. $1,177.

64 1/29 19 119 P2-SC6611-( ) $779. $1,253.

70 1/29 19 119 P2-SC7211-( ) $826. $1,323.


28 1/29 19 139 P2-SC3013-( ) $505. $838.

34 1/29 19 139 P2-SC3613-( ) $544. $917.

40 1/29 19 139 P2-SC4213-( ) $603. $1,032.

46 1/29 19 139 P2-SC4813-( ) $651. $1,112.

58 1/29 19 139 P2-SC6013-( ) $760. $1,253.

64 1/29 19 139 P2-SC6613-( ) $818. $1,332.

70 1/29 19 139 P2-SC7213-( ) $867. $1,401.


28 1/29 19 189 P2-SC3018-( ) $544. $917.

34 1/29 19 189 P2-SC3618-( ) $588. $994.

40 1/29 19 189 P2-SC4218-( ) $644. $1,112.

46 1/29 19 189 P2-SC4818-( ) $693. $1,188.

58 1/29 19 189 P2-SC6018-( ) $796. $1,332.

64 1/29 19 189 P2-SC6618-( ) $855. $1,412.

70 1/29 19 189 P2-SC7218-( ) $902. $1,482.

589 and 649 fabrics will usually be railroaded, 709 fabric will always be railroaded.

Order Code

Example: P2-SC-6018-A-A2P2-SC-BKT-PS-A

P2-SC Propeller screen

6018 58 1/29w x 189h

A Aluminum frame finish

A2 Thorn fabric

P2-SC-BKT-PS

2 privacy screen attachmentclamps

A Aluminum finish

Specify:

1. Pattern number2. Frame finish3. Screen fabric selection/suffix -M for

metal screen4. Attachment bracket (see page 80)5. Privacy clamp finish (see page 80)

Finishes

Frame, screen and privacy clamp paintfinish options:Aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 612)Bright White (suffix 118)

Screen fabric selection:Grade A:Black (suffix A4)Cane (suffix A5)Granite (suffix A1)Thorn (suffix A2)

Approved KnollTextiles:Allegory WC865Back Drop W302Bollywood WC1015Infinite K2263Matinee WC272Odeon K317Sequel WC866

Features

Screens:Fabric screens are universal for eithermodesty or privacy use. Screen heightsare measured from table top to screentop. 119 high screens are recommendedfor modesty application. Note: smallerscreens have to be railroaded as aspecial to match wide screens.

Screen Attachment:Privacy screens attach anywhere alongtable edge. They can be full tablewidth/depth or less. Correspondingattachment clamps must be orderedseparately.

Modesty screens attach to leg plates,have to be sized to match full table width(less 1/29) or depth for rectangulartraining tables.

Frame:Frame consists of extruded aluminumhorizontals and die-cast verticalmembers. Powdercoat finish.

Metal screens are sheet metal withperforation pattern and fusedpowder-coat finish. Metal screensshould be used for privacy only.



72 73

Emanuela FrattiniPropellert AccessoriesTackable Fabric Privacy Screens


description w d h pattern no.

COM

10 20 30 40 45 50 55 60

P2-SCT Propeller tackable fabric privacyscreen for training tables, 119 above tabletop

22 1/29 19 119 P2SCT2411-( ) $568. $573. $633. $639. $644. $691. $706. $721.

28 1/29 19 119 P2SCT3011-( ) $641. $646. $698. $704. $709. $779. $804. $821.

34 1/29 19 119 P2SCT3611-( ) $726. $732. $792. $804. $818. $867. $896. $917.

40 1/29 19 119 P2SCT4211-( ) $773. $780. $853. $862. $877. $952. $990. $1,006.

46 1/29 19 119 P2SCT4811-( ) $833. $839. $912. $920. $935. $1,025. $1,065. $1,090.

58 1/29 19 119 P2SCT6011-( ) $1,029. $1,033. $1,125. $1,133. $1,151. $1,282. $1,328. $1,360.

64 1/29 19 119 P2SCT6611-( ) $1,198. $1,227. $1,354. $1,381. $1,424. $1,439. $1,498. $1,539.

70 1/29 19 119 P2SCT7211-( ) $1,286. $1,316. $1,453. $1,482. $1,519. $1,539. $1,596. $1,633.


22 1/29 19 139 P2SCT2413-( ) $594. $598. $654. $661. $669. $706. $727. $736.

28 1/29 19 139 P2SCT3013-( ) $661. $668. $726. $731. $736. $796. $822. $840.

34 1/29 19 139 P2SCT3613-( ) $751. $761. $824. $838. $853. $885. $917. $935.

40 1/29 19 139 P2SCT4213-( ) $818. $828. $901. $917. $931. $992. $1,025. $1,048.

46 1/29 19 139 P2SCT4813-( ) $877. $888. $968. $983. $997. $1,072. $1,113. $1,135.

58 1/29 19 139 P2SCT6013-( ) $1,071. $1,082. $1,175. $1,188. $1,202. $1,321. $1,368. $1,400.

64 1/29 19 139 P2SCT6613-( ) $1,227. $1,253. $1,381. $1,412. $1,453. $1,467. $1,530. $1,567.

70 1/29 19 139 P2SCT7213-( ) $1,323. $1,354. $1,467. $1,498. $1,539. $1,558. $1,615. $1,657.


22 1/29 19 189 P2SCT2418-( ) $631. $636. $694. $699. $709. $735. $757. $768.

28 1/29 19 189 P2SCT3018-( ) $735. $738. $797. $810. $818. $867. $894. $911.

34 1/29 19 189 P2SCT3618-( ) $867. $882. $952. $964. $983. $994. $1,022. $1,039.

40 1/29 19 189 P2SCT4218-( ) $925. $939. $1,030. $1,039. $1,061. $1,094. $1,130. $1,154.

46 1/29 19 189 P2SCT4818-( ) $983. $997. $1,094. $1,112. $1,128. $1,181. $1,219. $1,247.

58 1/29 19 189 P2SCT6018-( ) $1,227. $1,244. $1,357. $1,374. $1,394. $1,487. $1,534. $1,566.

64 1/29 19 189 P2SCT6618-( ) $1,401. $1,432. $1,576. $1,606. $1,647. $1,662. $1,723. $1,764.

70 1/29 19 189 P2SCT7218-( ) $1,519. $1,548. $1,705. $1,733. $1,774. $1,789. $1,850. $1,891.

Order Code

Example: P2-SCT6018A-WC296/17P2-SC-BKT-PS-A

P2-SCT Propeller tackable screen

6018 609w x 189h

A Aluminum frame

WC296/17 Bauhaus Block, Evergreen

P2-SC-BKT Screen attachment bracket

PS Single bracket

A Aluminum finish

Specify:

1. Pattern number2. Frame finish3. Panel fabric selection4. Attachment clamp (see page 80)5. Attachment clamp finish (see page

80)

Finishes

Frame/clamp finish:Aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 612)Bright White (suffix 118)

Features

Screens:Propeller tackable screens areupholstered on front and back.

Screens 609 and wider will also berailroaded. Smaller screens have to berailroaded as a special to match widescreens.

Tackable screens can be specified forprivacy application only. Screen heightsare measured from table top to screentop. Privacy screens can be attachedanywhere along table edge. They can befull table width/depth or less.Corresponding attachment clamps mustbe ordered separately.

589 and 649 fabrics will usually berailroaded, 709 fabric will always berailroaded

Construction

Frame:Extruded aluminum horizontal anddie-cast vertical members. Powder-coatfinish.

Screen:1/29 thick mineral board for durable,highly tackable surface. Upholstered onboth sides.


Fabrics Approved for Upholstery on Propeller Tackable Screens

Grade 10:COMBroadcloth IIElementFoundationGrowth SpurtSymbolic DetailsTailor Made IIVersatility

Grade 20:Bauhaus BlockCircle LineCriss Cross

Grade 20 con’tInfiniteReflectResolutionWeave Three

Grade 30:Basket DraftFlowMatchpointMicroRelay

Grade 40:Foil RapHard RockHeavy MetalOrnamentPalladium

Grade 45:DristiMacroMezzo

Grade 50:Knoll HopsackPrestoRicochet

Grade 55:Knoll Felt


74 75

Emanuela FrattiniPropellert AccessoriesAttachment Clamps for Modesty and Privacy Screens


description . pattern no. brackets

P2-SC-BKT-MP Set of two modesty screenattachment clips

P2-SC-BKT-MP $44.

P2-SC-BKT-PS Set of two privacy screenattachment clamps, single

P2-SC-BKT-PS-( ) $123.

P2-SC-BKT-PSD Set of two privacy screenattachment clamps, shared

P2-SC-BKT-PSD-( ) $163.

P2-SC-BKT-PSE One privacy screenattachment clamp, end

P2-SC-BKT-PSE-( ) $104.

P2-SC-BKT-PST One privacy screenattachment clamp, T-end

P2-SC-BKT-PST-( ) $141.

Order Code

Example: P2-SC-BKT-PSD-111P2-SC-BKT-PSD

Set of two privacy screenattachment clamps, shared

111 Jet Black finish

Specify:

1. Pattern number2. Finish

Finishes

Frame, screen and privacy clamp paintfinish options:Aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 612)Bright White (suffix 118)

Features

Privacy screen attachment clamps:Clamps are die-cast aluminum with afused powder-coat finish. One set (twoclamps) required for attachment of eachscreen. Specify single attachmentclamps. Clamps can be attached at anylocation on table edge by simple screwfit.

Screens install without the use of anytools and are held in place with a simplefriction fit.

Privacy screen attachment clamps forshared configuration:One set (2 clamps) required for eachscreen. Specify shared attachmentclamps. Brackets attach on two tables, ina back-to-back or side-to-sideconfiguration at any location on width ordepth side of table. There will be a 3/49gap between connected tables below theshared screen.

Modesty screen attachment clips:Clips are injection molded medium greynylon. Two clips required for eachscreen. Clips are inserted in top of legendplate.

Mid-depth privacy screen attachment:Use two end clamps to attach mid-depthscreens anywhere along the table top.When using a mid-depth screen with astandard privacy screen, use one T-endclamp where the two screens meet andone end clamp at the free end.



76 77

Emanuela FrattiniPropellert AccessoriesTackable Modesty Screens for Flip-Top Tables


description w d h pattern no. brackets screen fabric

P2-FT Propeller tackable fabric modestyscreen for Flip-Top tables, 119

3197/89 119 P2FT4811-( ) $613.

4397/89 119 P2FT6011-( ) $722.

5597/89 119 P2FT7211-( ) $826.


3197/89 139 P2FT4813-( ) $651.

4397/89 139 P2FT6013-( ) $760.

5597/89 139 P2FT7213-( ) $867.


3197/89 189 P2FT4818-( ) $693.

4397/89 189 P2FT6018-( ) $796.

5597/89 189 P2FT7218-( ) $902.

P2-FT-BKT-MP Set of two modesty panelattachment clips for Flip-Top table

P2-FT-BKT-MP( ) $138.

Order Code

Example: P2FT4811-A-W534/4P2-FT-BKT-MP-A

P2FT Propeller Flip-Top modestyscreen

4811 319w x 119h

A Aluminum frame

W534/4 Foil Wrap, Silver

P2-FT-BKT-MP

Modesty screen attachmentbracket

A Aluminum finish

Specify:

1. Pattern number2. Frame finish3. Panel fabric selection4. Attachment clamp5. Attachment clamp finish

Finishes

Frame/Clamp finish:Aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 612)Bright White (suffix 118)

Features

Screens:Modesty screens for Flip-top tables areavailable in mesh screen fabric andselect KnollTextiles. Available in threestandard heights and widths. Screensare non-sided and non-directional.

Modesty screen attachment clips:Two P2-FT-BKT-MP clips required foreach screen. Clips are screw fixed to theFlip-top leg. Please reference thePropeller Manual for drawings.

Modesty screens for the Flip-top tablesdiffer in size to standard modesty/privacyscreens.

Construction

Frame:Extruded aluminum horizontal anddie-cast vertical members. Powder coatfinish.

Fabrics Approved for Upholstery on Flip-Top Modesty Screens

Mesh screen fabric:Black (suffix A4)Cane (suffix A5)Granite (suffix A1)Thorn (suffix A2)

Approved KnollTextiles:Allegory WC865Back Drop W302Bollywood WC1015Infinite K2263Matinee WC272Odeon K317Sequel WC866Transition W816


78 79

Emanuela FrattiniPropellert AccessoriesCredenzas and Sideboards


description w d* h pattern no.

top/edge/pedestal

laminate/flat edge/

painted case

top/edge/pedestal

laminate/wood/

painted case

top/edge/pedestal

veneer/flat edge/

veneer case

top/edge/pedestal

veneer/PE wood/

veneer case

top/edge/pedestal

veneer/

AE/SE wood/

veneer case

top/edge/pedestal

veneer/

AE1/SE1 wood/

veneer case

P5-0 Two position credenza 36 1/49 209 28 1/29 P5-01 $6,442. $8,020. $8,685. $9,999. $10,043. $10,043.

36 1/49 209 28 1/29 P5-02 $6,055. $7,629. $8,335. $9,589. $9,635. $9,635.

P5-1 Four position credenza 67 3/89 209 28 1/29 P5-11 $10,888. $13,389. $14,280. $15,349. $15,422. $15,422.

67 3/89 209 28 1/29 P5-12 $11,277. $13,389. $14,634. $15,349. $15,422. $15,422.

67 3/89 209 28 1/29 P5-13 $10,888. $12,774. $14,280. $14,923. $14,992. $14,992.

67 3/89 209 28 1/29 P5-14 $10,888. $12,774. $14,280. $14,923. $14,992. $14,992.

67 3/89 209 28 1/29 P5-15 $10,498. $12,164. $13,929. $14,496. $14,566. $14,566.

P5-2 Six position credenza 98 1/29 209 28 1/29 P5-21 $14,683. $17,988. $19,684. $20,894. $20,994. $20,994.

98 1/29 209 28 1/29 P5-22 $15,461. $18,600. $20,392. $21,317. $21,419. $21,419.

98 1/29 209 28 1/29 P5-23 $14,683. $17,375. $19,684. $20,466. $20,565. $20,565.

98 1/29 209 28 1/29 P5-24 $14,683. $17,375. $19,684. $20,466. $20,565. $20,565.

98 1/29 209 28 1/29 P5-25 $14,293. $17,786. $19,333. $20,038. $20,132. $20,132.

98 1/29 209 28 1/29 P5-26 $14,683. $17,375. $19,684. $20,466. $20,565. $20,565.

98 1/29 209 28 1/29 P5-27 $15,136. $17,988. $20,103. $20,894. $20,994. $20,994.

98 1/29 209 28 1/29 P5-28 $15,136. $17,988. $20,103. $20,894. $20,994. $20,994.

98 1/29 209 28 1/29 P5-29 $15,136. $17,988. $20,103. $20,894. $20,994. $20,994.

P5-C Small sideboard 67 3/89 209 28 1/29 P5-C $4,332. $5,826. $4,924. $7,037. $7,070. $7,070.

P5-D Large sideboard 98 1/29 209 28 1/29 P5-D $5,761. $7,871. $6,543. $9,558. $9,602. $9,602.

Order Code

Example: P5-2-9-V-AP5 Propeller credenza

2 Six positions

9 Double box/file, doubledoor,Double box/file

B Natural Beech veneer

A Aluminum legs and pulls

Example: P5-1-2-LJ-4-AP5 Propeller credenza

1 Four positions

2 Four box/file

LJ Brushed Aluminumlaminate top

4 Light Grey edgeband

A Aluminum pedestal, pullsand legs

Specify:

1. Pattern number2. Top finish (pedestal finish for veneer

tops)3. Edge band selection (sideboard and

laminate credenzas)4. Leg/pull/shelf finish (pedestal for

laminate top credenzas

* Please note, AE/SE optional edgeoption adds 3( to the overall depth ofeach piece; AE1/SE1 optional edgeoption adds 1 1/2( to the overall depthof each piece.

Finishes




Flat edgeband finishes:Black (suffix 111T)Mink (suffix 324T)Innertone (suffix 386T)Platinum (suffix 367T)Folkstone (suffix 004T)Bright White (suffix 118T)

Molded edgeband finishes:Black (suffix 300)Mink (suffix 324)Innertone (suffix 386)Platinum (suffix 367)Folkstone (suffix 004)Light Grey (suffix 4)Medium Grey (suffix 5)

Wood edge profiles:Autostrada edge, both sides (suffix AE)Autostrada edge, front (suffix AE1)Propeller edge (suffix PE)Saarinen edge, both sides (suffix SE)Saarinen edge, front (suffix SE1)

Leg, shelf and grommet finishes:Anodized Aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 612)Bright White (suffix 118)

Leg, pull, shelf and pedestal finishes onpainted credenzas:Aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 6112)Bright White (suffix 118)

Features

Credenza:Peanut-shaped leg of Propeller credenzadoes not include wire channels.

Wood credenzas:Pedestals on wood credenzas arepre-configured with matching veneer runalong credenza front.

Credenzas with laminate top:Pedestals on laminate top credenzas arepainted to match leg and pull finish. Allcredenzas are fully lockable. One key forall locks. Pull finish matches leg finish.

Credenzas have six legs, four side legsand two short center legs.

Credenza Construction:Pedestals of wood credenzas are 3-plysolid medium density fiberboard corewith veneer surface on front, back andsides. Pedestals of laminate topcredenzas have textured powder-coatpaint surface on front, back and sides.Pedestals have double moduleconstruction (double door, single doorleft or right with single box/file drawer,double box/file drawer). Layout ispreconfigured as shown to right.Credenzas have beam frameconstruction. Pedestal modules glideonto frame and are numbered insequence for veneer run.

Double door pedestal has one adjustableshelf. Inside dimensions are 299w,17 1/49d, 199h. A door hinges open fromleft. B door hinges open from right.P5-11 and P5-21 have single box/filedrawer units. Box/file drawer unit: filedrawer suitable for letter and legal filing;full extension drawers. Insides of drawersare lined with black vinyl.

Credenza Construction con’t.Extruded aluminum legs with anodizedaluminum or powder-coat finish (mediummetallic grey, dark metallic grey). Blackplastic leveling glides. Pulls are die-castaluminum with powder-coat finish. Beamsupports are powder-coated metal,positioned to be invisible in frontal view.

Sideboard:Peanut-shaped leg of Propeller sideboards does not include wire channels.Sideboards ship with perforated metalshelf that attaches to legs at 7 3/49 underside board top. Shelf finish matches legfinish. Small side-board has four legs,large sideboard has six legs (four sidelegs and two center legs).

Sideboard Construction:1 1/89 thick 3-ply solid medium densityfiberboard core with urethane edge onlaminate tops, ABS flat edgeband orsolid wood edge on wood tops. Blackplastic glides.

Extruded aluminum legs with anodizedor powder-coated finish.

18-gauge perforated metal shelf with 4rolled edges, attached to leg with steelrod. Fused powder-coat finish.

Credenza/sideboard leg profile:

Credenza pull detail:

Shipping:Credenzas and sideboards shippedknocked down. Field assembly required.Sideboards ship tops, shelf and legsseparately. Credenzas ship top, pedestalmodules (two for four position credenza,three for six position credenza), legs andbeam support separately. Pedestals aremarked for veneer run.


Credenza configurations:


80 81

Emanuela FrattiniPropellert AccessoriesReplacement Parts, Training and Conference Tables


description type w d h pattern no. list

P2-TLEG Replacement leg kit, trapezoidtables

Set of 2 3 3/49 1 5/89 27 1/49 P2-TLEG2-( )-( ) $931.

Set of 4 3 3/49 1 5/89 27 1/49 P2-TLEG4-( )-( ) $1,630.

P2-RLEG Replacement leg kit forrectangular table, aluminum leg

Set of 2 3 3/49 1 5/89 27 1/49 P2-RLEG2KIT-( )-( ) $931.

Set of 4 P2-RLEG4KIT-( )-( ) $1,630.

P2-TCLEG2 Replacement C-Leg kit Set of 2, 189 table P2-TCLEG218-( ) $2,227.

Set of 2, 249 and 309

tablesP2-TCLEG2-( ) $2,227.

P2-TTLEG Replacement T-Leg kit Set of 2, 309 tables P2-TTLEG30-( ) $2,227.

Set of 2, 369 tables P2-TTLEG2-( ) $2,227.

P3-CLEG Single conference table leg caster 2 1/49 27 1/29 P3-CLEG-C-( ) $488.

glide 2 1/49 27 1/29 P3-CLEG-F-( ) $488.

P2-CASTER4 Replacement casters,aluminum training leg

Set of 4 29 1 1/29 1 3/49 P2-CASTER4 $48.

P2-GLIDE4 Aluminum leg replacementglides

Set of 4 1 1/29 1 1/29 1 1/29 P2-GLIDE4 $48.

P3-KNOB8 Tool-free hand screws forconference table leg

8 for 2 legs P3-KNOB8 $242.

P2-C-2 Replacement connector bars Set of 2, temporaryconnection

4 3/89 3/49 3/49 P2-C-2 $55.

P4-RW-C2 Replacement connectors Set of 2, permanentconnection

P4-RW-C2 $56.

Order Code

Example: P2-RLEG2KIT-G-AP2-RLEGKIT

2 replacement legs, trainingtable, aluminum leg

G Glides

A Anodized Aluminum finish

Example: P3-CLEG-C-111P3-CLEG-C Replacement leg,

conference table, aluminumleg

111 Jet Black finish

Finishes

Specify:

1. Caster or glide option (Training tablelegs only)

2. Leg finish

Grommet and Leg finishes:Anodized aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 612)Bright White (suffix 118)


Features

Legs are for replacement of standardconference and training legs. Forhardwired applications specify emptyplexus boxes and empty legs. See page110 or Propeller manual for moreinformation.

For pre-wired applications, specify withpre-wired plexus boxes and pre-wiredlegs. See page 108 or the Propellermanual for more information.



82 83

Emanuela FrattiniPropellert AccessoriesReplacement Parts, Drum and Square Drum Base ConferenceTables


description base finish

panel

dimensions

(w x d)

footplate

dimensions

(w x d) h weight pattern no. list

P3-DBASES Small Drum Base Only PerforatedAluminum

189 x 189 259 x 259 27 1/49 83 P3-DBASES-(A) $5,917.

Veneer 189 x 189 259 x 259 27 1/49 83 P3-DBASES-W( ) $6,789.

P3-DBASEM Medium Drum Base Only PerforatedAluminum

189 x 189 309 x 309 27 1/49 98 P3-DBASEM-(A) $6,038.

Veneer 189 x 189 309 x 309 27 1/49 98 P3-DBASEM-W( ) $6,912.

P3-DBASEL Large Drum Base Only PerforatedAluminum

239 x 239 309 x 309 27 1/49 110 P3-DBASEL-(A) $6,396.

Veneer 239 x 239 309 x 309 27 1/49 110 P3-DBASEL-W( ) $7,269.

P3-SBASES Small Square Drum Base withSquare Plate

Aluminum 139 x 139 259 x 259 27 1/49 P3-SBASES-(A) $2,972.

Veneer 139 x 139 259 x 259 27 1/49 P3-SBASES-W( ) $4,039.

P3-SBASEM Medium Square Drum BaseOnly

Aluminum 139 x 139 309 x 309 27 1/49 P3-SBASEM-(A) $3,143.

Veneer 139 x 139 309 x 309 27 1/49 P3-SBASEM-W( ) $4,212.

P3-SBASEL Large Square Drum Base withSquare Plate

Aluminum 16 1/29 x 16 1/29 309 x 309 27 1/49 P3-SBASEL-(A) $3,306.

Veneer 16 1/29 x 16 1/29 309 x 309 27 1/49 P3-SBASEL-W( ) $4,539.

P4-WM4 Wire management C-clips P4-WM4 $44.

Order Code

Example: P3-DBASES-W(X)P3-DBASES

Small drum base only

W Veneer Option

X American Cherry finish

Specify:

1. Drum or Peanut base size2. Veneer or Aluminum option3. Veneer finish

FInishes

Peanut and Drum Base Finishes:Aluminum (suffix A)

Veneer top/edge finishes:Brown Oak (suffix V427)Burnt Walnut (suffix V313)Chalk Oak (suffix V421)Ebonized Walnut (suffix D)Graphite Oak (suffix V513)Light Oak (suffix V423)Maple (suffix K)Natural Beech (suffix B)Old English Walnut (suffix V417)Warm Brown Walnut (suffix J)American Walnut (suffix AW)Natural Oak (suffix ON)Fumed Oak (suffix OF)Ebonized Oak (suffix OE)American Cherry (suffix X)Bronzed Cherry (suffix V312)Light Cherry (suffix V315)Medium Red Mahogany (suffix Z)

Features


Jumper cables available for hardwiredapplications, see page 106.


84 85

Emanuela FrattiniPropellert AccessoriesReplacement Parts, Rectangular Drum and Peanut BaseConference Tables


description base finish

panel

dimensions

(w x d)

footplate

dimensions

(w x d) h weight pattern no. list

P3-RBASES Small Rectangular Drum BaseOnly

Aluminum 249 x 139 369 x 309 27 1/49 P3-RBASES-(A) $3,342.

Veneer 249 x 139 369 x 309 27 1/49 P3-RBASES-W( ) $4,645.

P3-RBASEM Medium Rectangular DrumBase Only

Aluminum 249 x 139 489 x 309 27 1/49 P3-RBASEM-(A) $3,625.

Veneer 249 x 139 489 x 309 27 1/49 P3-RBASEM-W( ) $5,021.

P3-RBASEL Large Rectangular Drum BaseOnly

Aluminum 319 x 169 369 x 369 27 1/49 P3-RBASEL-(A) $3,717.

Veneer 319 x 169 369 x 369 27 1/49 P3-RBASEL-W( ) $5,181.

P3-RBASEXL Extra Large RectangularDrum Base Only

Aluminum 319 x 169 489 x 369 27 1/49 P3-RBASEXL-(A) $4,088.

Veneer 319 x 169 489 x 369 27 1/49 P3-RBASEXL-W( ) $5,646.

P3-PBASE Peanut Base Only PerforatedAluminum

279 x 89 27 1/49 40 P3-PBASE-(A) $4,244.

Veneer 279 x 89 27 1/49 40 P3-PBASE-W( ) $5,293.

P4-WM4 Wire management C-clips P4-WM4 $44.

Order Code

Example: P3-SRBASEL-AP3-SRBASEL

Large Rectangular DrumBase only

A Perforated Aluminum finish

Specify:

1. Pattern number2. Veneer or Perforated Aluminum

option3. Veneer finish

Finishes

Peanut and Drum Base Finishes:Aluminum (suffix A)

Veneer top/edge finishes:Brown Oak (suffix V427)Burnt Walnut (suffix V313)Chalk Oak (suffix V421)Ebonized Walnut (suffix D)Graphite Oak (suffix V513)Light Oak (suffix V423)Maple (suffix K)Natural Beech (suffix B)Old English Walnut (suffix V417)Warm Brown Walnut (suffix J)American Walnut (suffix AW)Natural Oak (suffix ON)Fumed Oak (suffix OF)Ebonized Oak (suffix OE)American Cherry (suffix X)Bronzed Cherry (suffix V312)Light Cherry (suffix V315)Medium Red Mahogany (suffix Z)


1 base (small) $1,2161 base (medium) $1,3011 base (large) $1,3691 base (x-large) $1,454

Features


Jumper cables available for hardwiredapplications, see page 106.


86 87

Emanuela FrattiniPropellert ElectricalPlexus Box and Connectivity Options

Plexus Boxes for Training and Conference Tables are covered power and communications units mounted flush into the table top, offering aclean aesthetic. Plexus Boxes are installed in the field and fit in pre-configured cutout locations in Propeller table tops. Various cutoutlocations are available, see specific products pages for more information.

Plexus Box types and sizes:Plexus Boxes are available in two lengths, small and medium.Medium boxes are also available in a double width format.

Small Box (Training tables only)

Offers one duplex power outlet with surge protector, onecommunication outlet and one additional data plate.

P4S-BOXS-( )

Medium Box (Conference and training tables)

Offers room for two duplex power outlets with surgeprotector, one quadruple communication outlet and twoadditional data plates.

P4S-BOXM-( )

Double Medium Box (Conference tables only)

Offers room for four duplex power outlets with surgeprotector, two quadruple communications outlets andfour additional data plates.

P4SD-BOXM-( )

Plexus Box Connectivity options:Plexus Boxes are available with three connectivity options for either temporary or permanent installation.

Plexus Box with Cordset For temporary power and communications access.P4( )-BOX( )-PPUse existing leg.

Empty Plexus Box For hard-wired power and communications access. Compatible with legs shown below.P4( )-BOX( )-E

Training legP4-RWIN4-RE (right)P4-RWIN4-LE (left)

Conference legP3-CLEG-PE

Trapezoid legP4-RWIN4-TE

C-LegP4-RWIN4-CRE (right)P4-RWIN4-CLE (left)

T-LegP3-TLEGU-PE

Pre-wired Plexus Box For permanent power and communications access. Compatible with legs shown below.P4( )-BOX( )-PR

Training legP4-RWIN4-R (right)P4-RWIN4-L (left)

Conference legP3-CLEG-PR

Trapezoid legP4-RWIN4-T

C-LegP4-RWIN4-CR (right)P4-RWIN4-CL (left)

T-LegP3-TLEGU-PR


To specify Plexus Boxes:1. Determine power and datarequirements and suitable box size2. Specify table type with requiredcutout option. (see chart on tableproduct page)3. Specify box(es).4. Specify data outlets.5. Specify infeed legs and finish(empty and pre-wired versions only).6. Specify jumper cables (pre-wiredversion only).

Performance

Power options:The Plexus Box is available in threeelectric power options: a cordsetunit, comprised of a 15 amp singlecircuit with 3-prong plug; apre-wired unit, comprised of aneight wire power distribution systemfor two 20 amp convenience circuits(A,B) and two 20 amp protectedcircuits (X,Y) with separate neutraland ground; an empty unit,comprised of an empty box to befield installed by a licensedelectrician. All power andcommunication wiring is completelyseparated by a metal septum toavoid interference.

Data/Communication Options:The Plexus Box is available withstandardized cutouts for communicationand data faceplates, which are availableas blank or preconfigured with data andcommunication jacks. The small PlexusBox can accommodate two faceplates, themedium Plexus Box can accommodatethree faceplates and the double mediumPlexus box can accommodate six faceplates. Cordset boxes are sold with onepreconfigured data faceplate, please seeproduct details for specifics.

Power outlets anddata/communication faceplates arepositioned under a hinged lid toallow access. The extrudedaluminum lid features a brush sealallowing wires to pass when lid isclosed. Inside the box, powerreceptacles and onedata/communication cutout arepositioned on a 60° angle wall,while additionaldata/communication cutouts arelocated on the floor of the box.

Standard data/communicationscutouts will accommodate commonfaceplates by AMP, CommScope,Nordex and Panduit

Connectivity

Plexus Box with cordset:The Plexus Box with cordset offerstemporary power andcommunications access, comprisinga single 15 amp electrical circuitwith a 3-prong plug. The 15’ cablecan simply be channeled throughthe Propeller leg to connect to astandard floor or wall outlet. Thestandard Propeller leg is used withthis option. Plexus Boxes withcordset simply rest in the tablecutout. Do not attach permanently tothe table to comply with ULrequirements. Option not availablefor Chicago or New York.

Pre-wired Plexus Box:The pre-wired Plexus Box offersfour permanent 20 amp electricalcircuits for power distribution anddata access. An additional specialpre-wired infeed leg (R ) mustspecified to bring wires frombuilding power to supply power thetable. Jumper cables connect powerinfeed legs to first box and are usedto link multiple boxes. Suitable formost regions if connected tobuilding power by a licensedelectrician.

The pre-wired Plexus box uses aneight wire, four circuit powerdistribution system.

Empty Plexus Box for hardwiring:The empty Plexus Box forhardwiring offers permanent powerand data/communication access andhas room for wiring up to fourcircuits. An additional specialempty infeed leg (E) must bespecified to bring wires frombuilding power supply to the firstempty Plexus Box. Suitable for allregions.

Construction

The Plexus box is constructed of anextruded aluminum lid and bezel inanodized finish. Sides and body arefabricated of stamped steel withaluminum powder-coat finish.Plexus boxes attach via clamps fromunderneath the table top.Accommodates table thickness from19 to 1 1/29.

Cutout options

Plexus Box cutout locations:For cutout locations see chart onspecific product pages. Boxes shipwith actual cutout template for fieldcutting tables, when necessary.

Cutout dimensions (w x d):Small Plexus Box: 6.8759 x 6.259

Medium Plexus Box: 6.59 x 10.259

Double Medium 10.259 x 11.8759


88 89

Emanuela FrattiniPropellert ElectricalOne-Circuit Plexus Boxes with Cordset


description type w d h pattern no. list price

P4S-BOXS-PP small plexus box one electical duplex,room for two datafaceplates

7.59 6.759 2.89 P4S-BOXS-PP-X $1,010.

one electrical duplex,two RJ45 jacks withcategory 6 transitioncables

7.59 6.759 2.89 P4S-BOXS-PP-2 $1,509.

P4S-BOXM-PP medium shallow box withcordset and surge protector

two duplex, fourRJ11 jacks, room for2 additional dataplates

10.59 79 2.89 P4S-BOXM-PP-11(A) $1,959.

two duplex, fourRJ45 jacks, room for2 additional dataplates

10.59 79 2.89 P4S-BOXM-PP-5-(A,B)-(A) $1,981.

two duplex, two RJ11jacks, two RJ45jacks, room for 2additional data plates

10.59 79 2.89 P4S-BOXM-PP-4511-(A,B)-(A) $1,971.

P4SD-BOXM-PP medium shallow doublewide box with cordset and surge protector

four duplex, eightRJ11 jacks, room for4 additional dataplates

10.59 12.59 2.89 P4SD-BOXM-PP-11(A) $3,038.

four duplex, eightRJ45 jacks, room for4 additional dataplates

10.59 12.59 2.89 P4SD-BOXM-PP-5-(A,B)-(A) $3,046.

four duplex, fourRJ11 jacks, fourRJ45 jacks, room for4 additional dataplates

10.59 12.59 2.89 P4SD-BOXM-PP-4511-(A,B)-(A) $3,188.

Order Code

Example: P4SD-BOXM-PP-5-B-AP4SD-BOXM-PP

Medium shallow Plexus Box

5 Four category 5transition cables

B ATT/Lucenttransition cables (non-EIA)

A Aluminum finish

Specify:

1. Plexus Box for cutout size2. Desired data configuration3. Select B for (ATT/Lucent) or A for

(EIA) wiring in building4. Plexus Box lid finish

Finishes

Plexus Box lid finishes:Aluminum (suffix A)

Features

Plexus Box with Cordset:The Plexus Box with cordset offerstemporary power and data access at thetable top. The height of each box is only2.89 and accommodates table thicknessup to 1 1/29 allowing for complete kneeclearance. Inside the box, powerreceptacles and one data/communicationcutout are positioned on a angled wall,while additional data/communicationcutouts are located on the floor of thebox. All power and communicationwiring is completely separated by a metalseptum to avoid interference. Theextruded aluminum lid features a brushseal, allowing for wires to pass throughwhen the lid is closed. The box feature ablack circuit reset button.

The Plexus with cordset is comprised of asingle 15 amp electrical circuit with a3-prong plug. The 15’ cord can simply bechanneled through the Propeller leg toconnect to a standard floor or wall outlet.The standard Propeller leg is used withthis option. For horizontal wiremanagement, use wire managementtrough on page 100. Please note, thedouble medium box features two 15’cords.

UL listed product. Cordset Plexus Boxessimply rest in the table cutout. Do notattach permanently to the table to complywith UL requirements. This option is notavailable for Chicago or New York.

Three box sizes are available:

Small Plexus Box with cordset:The small Plexus Box offers a singleelectrical duplex and adata/communication cutout positioned onthe interior angled wall, with anadditional data/communication cutout inthe floor of the box. Available in twoconfigurations: one with preconfigureddata faceplate with two RJ45 jacks andtwo 20’ Category 6 transition cables (2),or without data/communicationfaceplates (X).

Medium Plexus Box with cordset:The medium Plexus Box offers twoelectrical duplexes and adata/communication cutout positioned onthe interior angled wall, with twoadditional data/communication cutoutsin the floor of the box. Available in threeconfigurations: with one preconfigureddata faceplate with four RJ11 jacks andfour 20’ Category 3 transition cables(11), with one preconfigured datafaceplate with four RJ45 jacks and four20’ Category 6 transition cables (5), orwith one preconfigured data faceplatewith two RJ11 jacks and two RJ45 jackswith two 20’ Category 3 transition cablesand two 20’ Category 6 transition cables.

Double Medium Plexus Box with cordset:The double medium Plexus Box withcordset offers the same features as themedium box, but two sided; a total of fourelectrical duplexes (two per side) and twodata/communication cutouts position onthe angled wall (one per side), with fouradditional data/communication cutoutsin the floor of the box (two per side).Available in three configurations: withtwo preconfigured data faceplates, eachwith four RJ11 jacks and four 20’Category 3 transition cables (11), withtwo preconfigured data faceplates, eachwith four RJ45 jacks and four 20’Category 6 transition cables (5), or withtwo preconfigured data faceplates, eachwith two RJ11 jacks and two RJ45 jackswith two 20’ Category 3 transition cablesand two 20’ Category 6 transition cables.

For preconfigured data options andtransition cables, select (A) for EIAwiring, or (B) for ATT/Lucent wiring.

To specify individualdata/communication plates, please seepage 112.

Construction

The Plexus Box is constructed of anextruded aluminum lid and bezel inanodized finish. Sides and body arefabricated of stamped steel withaluminum powder-coat finish. Plexusboxes attach via clamps from underneaththe table top. Accommodates tablethickness from 19 to 1 1/29.

Cut-out Dimensions (w x d):Small Plexus Box 6.8759 x 6.259

Medium Plexus Box 10.259 x 6.59

Double Medium Plexus Box 10.259 x11.8759


90 91

Emanuela FrattiniPropellert ElectricalEmpty Plexus Boxes for Hardwiring


description accommodates w d h pattern no. list price

P4S-BOXM-E medium shallow box, empty two duplex, room forthree additional dataplates

10.59 79 2.89 P4S-BOXM-E-(A) $1,045.

P4SD-BOXM-E double shallow mediumbox, empty

four duplex, room forsix additional dataplates

10.8759 12.59 2.89 P4SD-BOXM-E-(A) $1,876.

Order Code

Example: P4S-BOXM-E-AP4S-BOXM-E

Medium shallow plexus box,empty

A Aluminum finish

Specify: Propeller table with desiredcutout size and location

1. Plexus box size2. Anodized finish

Can also specify:

1. Empty leg, refer to page 102.2. Electrical outlets, refer to page 102.3. Communication outlets, refer to page

102.4. Jumper cable to connect empty leg to

1st plexus (female-male), refer topage 102.

5. Jumper cable to connect plexus boxes(male-male), refer to page 102.

Power outlets to be installed by electricalcontractor; communication outlets to beinstalled by licensed communicationscontractor.

Finishes

Plexus Box lid/infeed leg finishes:Aluminum (suffix A)

Empty Shallow Plexus for hardwiring

The empty Plexus Box for hardwiringoffers permanent power anddata/communication access and hasroom for wiring up to four circuits. Anadditional special empty infeed leg (E)must be specified to bring wires frombuilding power supply to the first emptyPlexus Box. Suitable for all regions.

Empty Medium Plexus Box:The medium Plexus Box offers room fortwo electrical duplexes and adata/communication cutout positioned onthe interior angled wall, with twoadditional data/communication cutoutsin the floor of the box.

Empty Double Medium Plexus Box:the empty double medium Plexus Boxoffers the same features as the mediumbox, but two sided; room for fourelectrical duplexes (two each side) andtwo data/communication cutouts positionon the interior angled wall (one per side),with four additional data/communicationcutouts in the floor of the box (two perside).

Outlets:Electrical duplexes are included witheach empty box; to be field installed by alicensed electrician.

Eagle Cooper,Black: 4270-5BKOrange: IG5262-RN

To specify individualdata/communication plates, please seepage 112.

Construction

The Plexus Box is constructed of anextruded aluminum lid and bezel inandonized finish. Sides and body arefabricated of stamped steel withaluminum powder-coat finish. Plexusboxes attach via clamps from underneaththe table top. Accomodates tablethickness from 19 to 1 1/29.

Cut-out Dimensions (w x d):Small Plexus Box: 6.8759 x 6.259

Medium Plexus Box: 10.259 x 6.59

Double Medium Plexus Box: 10.259 x11.8759

Infeed leg:For Training or Conference tables withstandard legs an additional specialempty infeed leg (E) must be specified tobring wires from building power supplyto the first empty Plexus Box. Suitablefor all regions.


92 93

Emanuela FrattiniPropellert ElectricalPre-Wired Plexus Boxes



P4S-BOXM-PR medium shallow box,pre-wired

one duplex A, one duplex X, roomfor 3 data plates

10.59 79 2.89 P4S-BOXM-PRA-(A) $1,864.

one duplex B, one duplex Y, roomfor 3 data plates

10.59 79 2.89 P4S-BOXM-PRB-(A) $1,864.

P4SD-BOXM-PR double medium shallowbox, pre-wired

2 duplex A, 2 duplex X, room for6 data plates

10.59 12.59 2.89 P4SD-BOXM-PRA-(A) $3,260.

2 duplex B, 2 duplex Y, room for6 data plates

10.59 12.59 2.89 P4SD-BOXM-PRB-(A) $3,260.

Order Code

Example: P4S-BOXM-PRA-AP4S-BOXM-PRA

Medium shallow plexus box,prewired

A Aluminum finish

Specify:

1. Plexus box size2. Specify Duplex A and X or B and Y3. Andonized finish

Can also specify:

1. Communication outlets, refer to page102.

2. Prewired leg, refer to page 102.3. Jumper to connect plexus boxes

(male/male), refer to page 102.4. Jumper to connect 1st plexus box to

leg (female/male), refer to page 102.

Finishes

Plexus Box lid/infeed leg finishes:Aluminum (suffix A)

Features

Pre-wired Plexus Boxes:The pre-wired Plexus Box offerspermanent electrical power and dataaccess at the table top. The data andelectrical receptacles are angled at 60degrees for easier access. Additionaldata faceplates are located on box floor.

The extruded aluminum hinge lidfeatures a brush seal, allowing wires topass when lid is closed.

All power and communication wiring iscompletely separated by a metal septumto avoid interference.

The Plexus Box is a four-circuit,eight-wire power distribution system thatincludes two 20-amp conveniencecircuits (A,B), with neutral and groundand two protected 20-amp circuits (X,Y)with separate neutral and ground. Allpower outlets are pre-configured to avoidcircuit overload. If several Plexus Boxesare connected together, alternateconfigurations A & B for optimal loaddistribution. The pre-wired systemconsists of three components:

• Plexus boxes with outlets.• A special pre-wired infeed leg for

connection to the building power. Allconference and training leg versionsare available.

• Jumper cables to connect individualPlexus Boxes and to connect the firstPlexus Box to pre-wired infeed leg.

UL listed product. Suitable for mostregions if connected to building electricby licensed electrician.

Electrical Components:Eagle Cooper (included in all shallowplexus boxes)Black: 4270-5BKOrange: IG5262-RN

Data Plates:Data Plates can fit up to four Cat 6/RJ45cables. To specify please see page 112.

Jumper cables:Jumper cables ensure power connectionbetween infeed legs and first Plexus Boxand between each consecutive box.Length calculated for maximum distance.

Jumper cables ship with clamps forattachment underneath table top.

Construction

Plexus Box:Extruded aluminum body in anodizedfinish. Sides are stamped steel withaluminum powder-coat finish. Lid isextruded aluminum in anodized orpowder-coat finish.

Accomodates tables up to 1 1/49 thick.

Cut-out Dimensions:Small 6.8759 x 6.259

Medium 6.59 x 10.259

Double Medium 10.259 x 11.8759

Infeed leg:Leg: extruded aluminum with anodizedor powder-coat finish. One section of legis completely enclosed for electricalwiring, other section has clear flexiblePVC strips to lay in communicationwiring. Stamped steel mounting plateswith powder-coat finish. Black nylonglides. Please specify ’PR’ version of legi.e., specify P3-CLEG-PR for aconference leg to match a pre-wiredPlexus box.

Pre-wired infeed leg has 68 open wirecord for attachment to building power viajunction box.


94 95

Emanuela FrattiniPropellert ElectricalQuadruplex and Wire Management



P4-PP 360° quadruplex desktop monumentfor use in grommet

4 power outlets P4-PP-( ) $394.

P4-WMT Double wire management trough 189 59 19 P4-WMT-18 $35.

329 59 19 P4-WMT-32 $47.

449 59 19 P4-WMT-44 $60.

569 59 19 P4-WMT-56 $79.

969 59 19 P4-WMT-96 $120.

P4-AWB Equity worksurface cable basket 209 49 29 P4-AWB20 $60.

269 49 29 P4-AWB26 $67.

329 49 29 P4-AWB32 $80.

369 4 29 P4-AWB36 $81.

429 49 29 P4-AWB42 $86.

P4-MRI Wire management clips (10) P4-MRI $44.

P4-GR Grommet replacement sleeve andcover

3 1/49 1 1/49 P4-GR-( ) $48.

Order Code

Example: P4-PP-AP4-PP Quadruplex monument, 4

power outlets

A Aluminum

Specify:

1. Pattern number2. Finish

Finishes

Quadruplex finishes:Black (suffix BK)Aluminum (suffix A)

Note:Aluminum finish is powder coat, notanodized.

Grommet Finishes:Aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 612)

Features

Quadruplex monument:Four power outlets in one single desktopmonument. The power hemisphere hastwo 15 amp, single circuit, 10’ powercords; one cord per two outlets. Fits instandard size Propeller grommet withadapter shipped with unit. Composed oftwo 180° black or aluminum powder-coatABS plastic dome segments. UL listed.

Morrison wire management clips:Plastic clips with fastener can be drilledon the underside of the table in desiredlocation to hold up wires and cables.Simply drill a pilot hole in the desiredlocation .79 deep (use 15/329 drill).

Wire management troughs:Rigid black PVC plastic.



96 97

Emanuela FrattiniPropellert Electrical2+2 Raceway Kit Electrical options for Training and Conferencetables

The Propeller raceway kit is used when a permanent configuration with rectangular and trapezoid training tables is specified. Typical examples for suchsituations are desk configurations, cluster desk configurations, computer training room setups. The raceway kit offers permanent power and communicationoutlets accessible from underneath the top. Access to these outlets is provided through grommets in the table. Quadruplex or transact outlets may also bringthe wiring up to the table top.

Raceway kit componentsThe Propeller Raceway kit is comprised of three components:Infeed leg, Raceway, Jumper cable and the power andcommunications outlets.

Power infeed legs:Provides permanent power and communications access. Alternatively empty infeed legs can also be specified.Raceway compatible with legs shown below.

Raceway:Raceways are available in various different lengths. All raceways offer room fortwo duplex power outlets with surge protection. The 209, 269, 389 long racewayalso has pre-cut holes for installation of two double communication outlets.Raceways are compatible with training and trapezoid tables and can be locatedin the front of mid-depth positions of all tables, and also at the back of thetrapezoid table.

Jumper cables:There are two types of jumper cables. Male-Female jumper cables are used toconnect power infeed legs to the first plexus box or first raceway. Male-malejumper cables are used to connect between plexus boxes or between raceways.

Typical Raceway configurations:Virtually any electrical layout can be realized by utilizing the power infeed leg, proper lengths of raceway and jumper cables. Raceways provide combinations ofduplex power outlets and duplex communications outlets. The length of the table top defines the length of the raceway.

90& Desking configuration:Consists of a power infeed leg, a long andshort raceway and 2 jumper cables

Linear computer training configuration:Consists of a power infeed leg, 2 raceways of equal lengthmounted at front of desk, and 2 jumper cables. This configurationmay be extended to incorporate any number of desks.

Cluster configuration:Consists of a power infeed leg of 4 short and long raceways connected by 8jumper cables.

Curved training configuration:Consists of a power infeed leg, 3 raceways of equal length mounted atmid-depth of desk, and 3 jumper cables.


Specify:1. Suitable raceway for every table2. Jumper cables for every

table-to-table connection.3. Power infeed leg4. Power infeed leg finish5. Power and communications

outlets

Description

Raceway kit:The 2 + 2 Raceway kit is afour-circuit, eight-wire modularpower distribution system availablefor all Knoll systems. Racewaycomponents distribute two 20 ampconvenience circuits (A,B) withshared neutral and ground and twosurge protected 20 amp circuits (X,Y) with separate neutral andground. Each raceway has fourconnectors for jumper cables, twoon left and two on the right. Thisallows for configurations withbranching side connections from theoverall circuit.

A complete Raceway Kit consists of:

- Pre-assembled Raceway mountedinside metal trough. One racewayper table required.

- Jumper cables for bridging powerbetween raceways on ganged tables.

- Power infeed legs bring powerfrom building power to raceway.

Construction

Raceway:Bent sheet metal trough with darkgrey finish. Raceway is fullyenclosed in metal trough.

Jumper cables:Electrical conduit encased in aflexible metal tube with electricalconnectors on both ends.

Power infeed leg:Extruded aluminum leg with glideand cast aluminum end plate or castaluminum foot for C-legs or T-legsWiring is shielded inside fullyenclosed leg section. 6’ conduitemanating from bottom of leg forconnection to building power. 9 1/49long jumper cable emanating fromtop of leg is used to connect powerinfeed leg to raceway.

Specifications

Raceway:All raceways include a pre-installedpower rail that fits 2 duplex outlets.The 209, 269, 389 long raceway alsohas pre-cut holes for installation oftwo double communication outlets.Raceways ship with special lockingconnectors for permanently gangingtables.

Communication wiring has to befield installed by communicationcontractor.

Raceway kits do not include wiremanagement trough for surpluswires. Specify P4-WMT or P4-AWBfor storage of surplus wires.

Note: all tables must be gangedpermanently with electricalconnectors when Raceway Kit isused.

Duplex outlets:Duplex outlet circuits aredesignated by white letters on blackbackground. Two duplex outletsmarked for a specific circuit can bespecified. Choose none, one or twoduplex outlets per raceway. Eachraceway kit can receive two duplexoutlets of the same or of differentcircuits.

Communications modules:AMP outlet faceplates have blacktextured finish. A maximum of twodouble communications outlets canbe specified for different wiring andstandards. AMP RJ45 outlets areavailable with EIA-T568B (ATTwiring) or EIA-T568A (all other EIAwiring) configurations. All RJ45communications outlets arespecially configured and rated for

Category 5 high speed data cabling,except those with couplers (Cat 3).For more communications moduleoptions, consult the Currentspricelist.

Jumper cables:Jumper cables connect power fromraceway to raceway, bridgingbetween tables. They consist ofelectrical conduit encased in aflexible metal tube with electricalconnectors on both ends. Differentlength jumper cables are requireddepending on the configuration.

Pre-wired, power infeed leg:Pre-wired, power infeed leg suppliesraceway with power from buildingpower source. Extruded aluminumwith anodized or powder coat finish.One section of the leg is fullyenclosed for electrical wiring, theother has a clear, flexible PVC stripto lay in data cables.

A 9 1/49 long cable emanating fromtop of leg is used to connect powerinfeed leg to raceway. 6’ conduitemanating from bottom of leg isused for hard-wiring leg to buildingpower. This can be cut to lengthduring installation.

Specify left leg if infeed is locatedleft of raceway, right leg if infeed islocated right of raceway. Installationby licensed electrician only.


98 99

Emanuela FrattiniPropellert Electrical2+2 Raceway Components



P4-RWR Power Raceway Kit for rectangulartable

489 w rect tbls 149 2 1/29 3 1/49 P4-RWR48 $621.

609 w rect tbls 269 2 1/29 3 1/49 P4-RWR60 $661.

669 w rect tbls 269 2 1/29 3 1/49 P4-RWR66 $661.

729 w rect tbls 389 2 1/29 3 1/49 P4-RWR72 $699.

P4-RWT Power Raceway Kit for trapezoidtable

Trapezoid table, longside

209 2 1/29 3 1/49 P4-RWT $661.

Two RJ11 AMP (box of 10) Two RJ11, 110termination

P4-PDC-22 $700.

Two RJ11, couplers P4-PDC-21 $700.

Two RJ45 AMP (box of 10) Two RJ45, couplers P4-PDC-12 $700.

RJ11/RJ45 AMP (box of 10) RJ11, RJ45, 110,EIA-T568A/6+5

P4-AMP1145A $752.

RJ11, RJ45, 110,EIA-T568B/6+5

P4-AMP1145B $752.

RJ11, RJ45, couplers P4-PDC-24 $700.

P4-RW-D Duplex outlets, black Circuit A P4-RWDA $48.

Circuit B P4-RWDB $48.

Circuit X P4-RWDX $48.

Circuit Y P4-RWDY $48.

P4-RW-DO Duplex outlets, orange Circuit X P4-RWDOX $56.

Circuit Y P4-RWDOY $56.

Order Code

Example: P4-RWR60P4 Propeller accessory

RW Raceway

R For rectangular table

60 For 609 wide table

Specify:

1. Suitable raceway kit for every table2. Jumper cables for every table-to-table

connection3. Power infeed leg (one per raceway)4. Power infeed leg finish5. Power and communication outlets


Infeed leg finishes:Anodized Aluminum (suffix A)Jet Black (suffix 111)Medium Metallic Grey (suffix 612)

Propeller raceway:Propeller 2 + 2 Raceway is a four-circuit,eight-wire modular power distributionsystem available for all Knoll Systems. 2+ 2 Raceway components distribute two20-amp convenience circuits (A, B), withneutral and ground, and two protected20-amp circuits (X, Y) with separateneutral and ground. UL183 listed for useon tables.

A complete Propeller Raceway consistsof pre-assembled raceway kits mountedinside metal troughs, jumper cables andinfeed legs, ordered individually.

• One raceway kit per table required.• Jumper cables bridge power between

tables.• Power infeed legs bring power from

building power to raceway.

The raceway circuit is connected to thebuilding power via a junction box.Installation by licensed electrician only.



Note: All tables must be gangedpermanently with electricalconnectors when used withraceway.

Raceway:All raceways include a pre-installedpower rail that fits 2 duplex outlets. The209, 269, 389 long raceway also haspre-cut holes for installation of twodouble communication outlets. The 149

raceway can fit either 2 duplex outlets orone duplex outlet and one doublecommunications outlet. Raceways shipwith special locking connectors forpermanently ganging tables.

Communication wiring has to be fieldinstalled by communication contractor.

Raceway kits do not include wiremanagement trough for surplus wires.Use P4-WMT/P4-WMTRon page 98 for storage of surplus wires.

Jumper cables:Jumper cables ensure power connectionin a straight line configuration, or fortablesjoined perpendicularly, or forconfigurations with bridges or segmentsbetween tables.


Power infeed leg:Supplies raceway with power frombuilding power source. Complete legassembly hardwired inside, fullyenclosed wiring. Use junction box toconnect raceway to building power.

Specify left leg if infeed is located left ofraceway, right leg if infeed is locatedright of raceway. Power infeed has 68

cord for hard wiring that can be cut tolength during installation of raceway.Cord must be cut to 189 length or less forapplication in New York City.

Duplex outlets:Duplex outlet circuits are designated bywhite letters on black background.

Communication modules:AMP outlet faceplates are black texturedfinish.

AMP RJ45 outlets are available withEIA-T568B (ATT wiring) or EIA-T568A(all other EIA wiring) configurations.

All RJ45 data/communication outlets arespecially configured and rated forCategory 5 high speed data cabling,except those with couplers (Cat 3).

Construction

Power infeed leg:Extruded aluminum leg with glide andcast aluminum end plate or castaluminum foot for C-legs or T-legs.Wiring is shielded inside fully enclosedleg section. 68 open lines to attachjunction box on bottom of leg. 9 1/49 longjumper infeed end at top of infeed legconnects to raceway kit.

Raceway Kits:Bent sheet metal trough with darkmetallic grey finish (suffix V).

Raceway is fully enclosed in metaltrough.

Refer to page 106 for jumper cables.


100 101

Emanuela FrattiniPropellert ElectricalJumper Cables for Raceway Kit and Pre-Wired Plexus Boxes


description type w pattern no. list price

P4-RWJ Male-male jumper cable- toconnect between plexus boxes or betweenraceways

109 P4-RWJ10 $126.

179 P4-RWJ17 $133.

279 P4-RWJ27 $152.

379 P4-RWJ37 $163.

479 P4-RWJ47 $175.

579 P4-RWJ57 $189.

679 P4-RWJ67 $204.

P4-RWMF Female-male jumper cable- toconnect power infeed leg to first plexus boxor first raceway

109 P4-RWMFJ10 $126.

179 P4-RWMFJ17 $133.

279 P4-RWMFJ27 $152.

379 P4-RWMFJ37 $163.

P4-RWM Infeed cable Prewired power connection for drum/peanut 309 P4-RWM30 $226.

Prewired power connection for drum/peanut 969 P4-RWM96 $397.

Order Code

Example: P4-RWMFJ17P4RWMF Female-male jumper cable

to connect power infeed legto first plexus box or firstraceway

J17 179 female/male jumpercable

Specify:

1. Male-male or male-female jumpercable connection

2. Length of jumper cable needed


Note: All tables must be gangedpermanently with electricalconnectors when used withraceway. Building power must beturned off before reconfiguration.

Jumper cables:Jumper cables ensure power connectionin a straight line configuration, or fortables joined perpendicularly, or forconfigurations with bridges or segmentsbetween tables.


Jumper cables: TrainingJumper cables ensure power connectionbetween legs and raceway kits undereach table.

Raceway jumper connections:Male-male jumper cables for connectionbetween raceway kits.

Female-male jumper cables forconnection between power infeed leg andraceway kit.

Plexus jumper connections:Male-male jumper cables for connectionbetween Plexus boxes.

Female-male jumper cables forconnection between power infeed leg andPlexus box.


102 103

Emanuela FrattiniPropellert ElectricalLeg Options for Training and Conference TablesLeg Options for Prewired Plexus Boxes


description type pattern no. list price

P3-CLEG-PR Conference Std. leg, Prewired (Universal) P3-CLEG-PR-( ) $1,000.

P3-TLEGU-PR T-Leg, Prewired (Universal) P3-TLEGU-PR-( ) $1,512.

T-Leg, Prewired (Universal) for 309 Tables P3-TLEGU-PR30-( ) $1,451.

P4-RWIN4-CL C-Leg, Prewired (Left) P4-RWIN4-CL-( ) $1,512.

P4-RWIN4-CR C-Leg, Prewired (Right) P4-RWIN4-CR-( ) $1,512.

P4-RWIN4-T Trapezoid Std. leg, Prewired (Universal) P4-RWIN4-T-( ) $655.

P4-RWIN4-RR Training Std. leg, Prewired (Right) P4-RWIN4-RR-( ) $655.

P4-RWIN4-RL Training Std. leg, Prewired (Left) P4-RWIN4-RL-( ) $655.

Order Code

Example: P4-RWIN4-L(A)P4-RWIN4-L

Infeed leg for rectangulartable,left

A Anodized finish

Specify:

1. Power infeed leg2. Power infeed leg finish

Finishes




Infeed leg:Standard leg: extruded aluminum withanodized or powder-coat finish. Onesection of leg is completely enclosed forelectrical wiring, other section has clearflexible PVC strips to lay incommunication wiring. Stamped steelmounting plates with powder-coat finish.Black nylon glides.

Standard conference, trapezoid andT-Legs are universal and can be used oneither side of the table. For C-Legs andtraining specify right or left.

C-Leg & T-Leg: Extruded aluminum withanodized or powder-coat finish. Onesection of leg is completely enclosed forelectrical wiring, other section has clearflexible PVC strips to lay incommunication wiring. Cast aluminumfoot plate with textured surface withpowder-coat finish matching the legfinish. Steel mounting plates withpowder-coat finish.

Cast aluminum foot plate with texturedsurface with powder-coat finish matchingthe leg finish. Steel mounting plates withpowder-coat finish. Black nylon glides.


104 105

Emanuela FrattiniPropellert ElectricalLeg Options for Training and Conference TablesLeg Options for Empty Plexus Boxes


description type pattern no. list price

P3-CLEG-PE Conference Std. leg, Empty (Universal) P3-CLEG-PE-( ) $698.

P3-TLEGU-PE T-Leg, Empty (Universal) P3-TLEGU-PE-( ) $931.

T-Leg, Empty (Universal) for 309 tables P3-TLEGU-PE30-( ) $894.

P4-RWIN4-RER Training Std. leg, Empty (Right) P4-RWIN4-RER-( ) $496.

P4-RWIN4-REL Training Std. leg, Empty (Left) P4-RWIN4-REL-( ) $496.

P4-RWIN4-CRE C-Leg, Empty (Right) P4-RWIN4-CRE-( ) $1,259.

P4-RWIN4-CLE C-Leg, Empty (Left) P4-RWIN4-CLE-( ) $1,259.

P4-RWIN4-TE Trapezoid Std. Leg, Empty P4-RWIN4-TE-( ) $496.

Order Code

Example: P4-RWIN4-RE(A)P4-RWIN4-RE

infeed leg for rectangulartable,right

A Anodized finish

Specify:

1. Power infeed leg2. Power infeed leg finish

Finishes




Infeed leg:Standard leg: extruded aluminum withanodized or powder-coat finish. Onesection of leg is completely enclosed forelectrical wiring, other section has clearflexible PVC strips to lay incommunication wiring. Stamped steelmounting plates with powder-coat finish.Black nylon glides.

Standard conference, trapezoid andT-Legs are universal and can be used oneither side of the table. For C-Legs andtraining, specify right or left.

C-Leg & T-Leg: Extruded aluminum withanodized or powder-coat finish. Onesection of leg is completely enclosed forelectrical wiring, other section has clearflexible PVC strips to lay incommunication wiring. Cast aluminumfoot plate with textured surface withpowder-coat finish matching the legfinish. Steel mounting plates withpowder-coat finish.

Cast aluminum foot plate with texturedsurface with powder-coat finish matchingthe leg finish. Steel mounting plates withpowder-coat finish. Black nylon glides.


106 107

Emanuela FrattiniPropellert ElectricalPlexus Communication and Data Faceplates

description accomodates w d h color pattern no. list price

P7-C3 data faceplate,one RJ-11 communication jack

one RJ-11Cat. 3 jack*

3.29 1.99 .49 black P7-C3 $72.


3.29 1.99 .49 grey P7GR-C3 $84.

P7-C6 data faceplate,one RJ-45 data jack


3.29 1.99 .49 black P7-C6 $113.


3.29 1.99 .49 grey P7GR-C6 $128.

P7-C3-C6 data faceplate, one RJ-11communication jack, one RJ-45 data jack

one RJ-11Cat. 3 jack,one RJ-45Cat.6 jack*

3.29 1.99 .49 black P7-C3-C6 $165.

one RJ-11Cat. 3 jack,one RJ-45Cat.6 jack*

3.29 1.99 .49 grey P7GR-C3-C6 $179.

P7-C3-C6-C6 data faceplate,one RJ-11 communication jack,two RJ-45 data jacks

one RJ-11Cat. 3 jack,two RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-C3-C6-C6 $275.

one RJ-11Cat. 3 jack,two RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-C3-C6-C6 $288.

P7-C6-C6 data faceplate,two RJ-45 data jacks

two RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-C6-C6 $216.

two RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-C6-C6 $229.

Order Code

Example: P7-C3-C6-C6P7 Black data faceplate

C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack

Specify: Faceplate with desiredcommunication or data jacks.

1. Faceplate2. Communication/data jack3. Communication/data jack4. Communication/data jack

On-site wiring to be installed bycommunications/data contractor.

Finishes

Faceplate finishes:Black (suffix P7)Grey (suffix P7GR)

Communication data options:RJ-11 Category 3 jack (suffix C3) *RJ-45 Category 5e inline coupler(suffix C5E)RJ-45 Category 6 jack (suffix C6) *Fiber optic (suffix LC)

Data cables are not supplied.

* requires on-site wiringRJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacksrequire wires to be crimped to backs.

A/V and data options:15 pin VGA (suffix VGA)Mini Stereo jack (suffix MS) *Mini Stereo coupler (suffix MSI)HDMI coupler (suffix HDMI)3 pin XLR female (suffix 3X) *3 pin mini XLR female (suffix 3M) *Cord minders (suffix CM)Blank plate (suffix X)

Features

Communication, data jacks:RJ-11 Telephone Connection:RJ-11 Category 3 data jack, requires sitewiring and wires must be crimped toback of jack. Configured for Siemonscables. (suffix C3)Configured for Amp cables.(suffix C3I)RJ-45 Data Connection:RJ-45 Category 5e in-line couplerfemale/female. Configured for Ampcables. (suffix C5E)RJ-45 Category 6 data jack, requires sitewiring and cables must be crimped toback of jack. Configured for Siemonscables. (suffix C6)

A/V and data jacks:DB Connection:15 pin High density VGA female/femalecoupler. (suffix VGA)DVI Connection:DVI in-line female/female coupler.(suffix DVI)RCA Connection:White (left audio), Red (right audio) andYellow (composite video) female/femalecoupler. (suffix RCA)Stereo Connection:Mini Stereo (3.5mm) jack, requires sitewiring (suffix MS). Mini Stereo (3.5mm)female/female coupler (suffix MSI).

USB Connection:USB A/A inline in XLR body. (suffixUSB)Video Connection:S-Video (SVHS) female/female coupler.(suffix SV)XLR Connection:3 pin XLR jack, requires site wiring(suffix 3X). 3 pin mini XLR jack,requires site wiring (suffix 3M).HDMI Connection:HDMI in-line female/female coupler(suffix HDMI).* requires on-site wiring.

A/V Cables are not included.

Construction

ABS fire retardant faceplate with integralcolor. Fits shallow Plexus box openings.


108 109



P7-C6-C6-C6 data faceplate,three RJ-45 data jacks

three RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-C6-C6-C6 $320.

three RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-C6-C6-C6 $334.

P7-C6-C6-C6-C6 data faceplate,four RJ-45 data jacks

four RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-C6-C6-C6-C6 $422.

four RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-C6-C6-C6-C6 $435.

P7-C3-C3-C6-C6 data faceplate,two RJ-11 communication jacks,two RJ-45 data jacks

two RJ-11Cat. 3 jack,two RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-C3-C3-C6-C6 $333.

two RJ-11Cat. 3 jack,two RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-C3-C3-C6-C6 $346.

P7-C5-C5 data faceplate,two RJ-45 data jacks

two RJ-45Cat. 5e couplers,female/female

3.29 1.99 .49 black P7-C5-C5 $216.

two RJ-45Cat. 5e couplers,female/female

3.29 1.99 .49 grey P7GR-C5-C5 $229.

P7-C5-C5-C5 data faceplate,three RJ-45 data jacks

three RJ-45Cat. 5e couplers,female/female

3.29 1.99 .49 black P7-C5-C5-C5 $320.

three RJ-45Cat. 5e couplers,female/female

3.29 1.99 .49 grey P7GR-C5-C5-C5 $334.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



110 111



P7-C3I-C3I data faceplate,two RJ-11 communication jacks

two RJ-11Cat. 3 couplers,female/female

3.29 1.99 .49 black P7-C3I-C3I $98.

two RJ-11Cat. 3 couplers,female/female

3.29 1.99 .49 grey P7GR-C3I-C3I $111.

P7-LC-LC data faceplate,two fiber optic connectors

two LC fiberoptic duplexconnectorsfemale/female

3.29 1.99 .49 black P7-LC-LC $471.

two LC fiberoptic duplexconnectorsfemale/female

3.29 1.99 .49 grey P7GR-LC-LC $485.

P7-LC-LC-C6-C6 data faceplate,two fiber optic connectors,two RJ45 Cat. 6 jacks

two fiber opticduplex connectors,two RJ45 Cat. 6jacks

3.29 1.99 .49 black P7-LC-LC-C6-C6 $677.

two fiber opticduplex connectors,two RJ45 Cat. 6jacks

3.29 1.99 .49 grey P7GR-LC-LC-C6-C6 $692.

P7-VGA-C6 data faceplate,one 15 pin VGA 609 patch cord,one RJ-45 data jack

one 15 pinVGA 609 patch cord,one RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-VGA-C6 $290.

one 15 pinVGA 609 patch cord,one RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-VGA-C6 $304.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



112 113



P7-VGA-C6-C6 data faceplate,one 15 pin VGA 609 patch cord,two RJ-45 data jacks

one 15 pinVGA coupler,two RJ-45Cat. 6 jacks*

3.29 1.99 .49 black P7-VGA-C6-C6 $394.

one 15 pinVGA coupler,two RJ-45Cat. 6 jacks*

3.29 1.99 .49 grey P7GR-VGA-C6-C6 $407.

P7-VGA-C3-C6 data faceplate,one 15 pin VGA ,one RJ-11 communication jack,one RJ-45 data jack

one 15 pinVGA coupler,one RJ-11Cat. 3 jack,one RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-VGA-C3-C6 $349.

one 15 pinVGA coupler,one RJ-11Cat. 3 jack,one RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-VGA-C3-C6 $363.

P7-VGA-MS-C3-C6 data faceplate,one 15 pin VGA 609 patch cord,one Mini-Stereo jack, one RJ-11communication jack, one RJ-45 data jack

one 15pinVGA ,one Mini-Stereo jack,one RJ-11Cat. 3 jack,one RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-VGA-MS-C3-C6 $369.

one 15pinVGA ,one Mini-Stereo jack,one RJ-11Cat. 3 jack,one RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-VGA-MS-C3-C6 $383.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



114 115



P7-VGA-MSI-C3-C6 data faceplate,one 15 pin VGA w/609 patch cord,one Mini-Stereo coupler, one RJ-11communication jack, one RJ-45 data jack

one 15 pinVGA,one Mini-Stereoin-line coupler,one RJ-11Cat. 3 jack,one RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-VGA-MSI-C3-C6 $417.

one 15 pinVGA,one Mini-Stereoin-line coupler,one RJ-11Cat. 3 jack,one RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-VGA-MSI-C3-C6 $431.

P7-VGA-MS-C6 data faceplate,one 15 pin VGA w/ 609 patch cord,one Mini-Stereo jack,one RJ-45 data jack

one 15 pinVGA,one Mini-Stereo jack,one RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-VGA-MS-C6 $309.

one 15 pinVGA,one Mini-Stereo jack,one RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-VGA-MS-C6 $322.

P7-VGA-MSI-C6 data faceplate,one 15 pin VGA w/609 patch cord,one Mini-Stereo coupler,one RJ-45 data jack

one 15 pinVGA,one Mini-Stereoin-line coupler,one RJ-45Cat. 6 jack*

3.29 1.99 .49 black P7-VGA-MSI-C6 $359.

one 15 pinVGA,one Mini-Stereoin-line coupler,one RJ-45Cat. 6 jack*

3.29 1.99 .49 grey P7GR-VGA-MSI-C6 $372.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



116 117



P7-VGA-MS-C6-C6 data faceplate,one 15 pin VGA w/609 patch cord,one Mini-Stereo jack,two RJ-45 data jacks

one 15 pinVGA coupler,one Mini-Stereo jack,two RJ-45Cat. 6 jacks*

3.29 1.99 .49 black P7-VGA-MS-C6-C6 $412.

one 15 pinVGA coupler,one Mini-Stereo jack,two RJ-45Cat. 6 jacks*

3.29 1.99 .49 grey P7GR-VGA-MS-C6-C6 $425.

P7-VGA-MSI-C6-C6 data faceplate,one 15 pin VGA w/609 patch cord,one Mini-Stereo coupler,two RJ-45 data jack

one 15 pinVGA coupler,one Mini-Stereoin-line coupler,two RJ-45Cat. 6 jacks*

3.29 1.99 .49 black P7-VGA-MSI-C6-C6 $461.

one 15 pinVGA coupler,one Mini-Stereoin-line coupler,two RJ-45Cat. 6 jacks*

3.29 1.99 .49 grey P7GR-VGA-MSI-C6-C6 $486.

P7-C3-C6-USB data faceplate,one RJ-11 communication jack,one RJ-45 data jack,one USB A/A w/729 patch cord

one RJ-11Cat. 3 jack,one RJ-45Cat. 6 jack,*one USB A/Aw/729 patch cord

3.29 1.99 .49 black P7-C3-C6-USB $333.

one RJ-11Cat. 3 jack,one RJ-45Cat. 6 jack,*one USB A/Aw/729 patch cord

3.29 1.99 .49 grey P7GR-C3-C6-USB $346.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



118 119



P7-VGA-MS data faceplate,one 15 pin VGA w/609 patch cord,one Mini-Stereo jack

one 15 pinVGA coupler,one Mini-Stereojack*

3.29 1.99 .49 black P7-VGA-MS $207.

one 15 pinVGA coupler,one Mini-Stereojack*

3.29 1.99 .49 grey P7GR-VGA-MS $220.

P7-VGA-MSI data faceplate,one 15 pin VGA w/609 patch cord,one Mini-Stereo coupler

one 15 pinVGA coupler,one Mini-Stereoin-line coupler

3.29 1.99 .49 black P7-VGA-MSI $256.

one 15 pinVGA coupler,one Mini-Stereoin-line coupler

3.29 1.99 .49 grey P7GR-VGA-MSI $270.

P7-3X-3X data faceplate,two 3 pin XLR jacks

two 3 pinXLR jacks*

3.29 1.99 .49 black P7-3X-3X $430.

two 3 pinXLR jacks*

3.29 1.99 .49 grey P7GR-3X-3X $443.

P7-3M-3M data faceplate,two 3 pin mini-XLR jacks

two 3 pinmini-XLR jacks*

3.29 1.99 .49 black P7-3M-3M $339.

two 3 pinmini-XLR jacks*

3.29 1.99 .49 grey P7GR-3M-3M $353.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



120 121



P7-3M-3M-3M data faceplate,three 3 pin mini-XLR jacks

three 3 pinmini-XLRjacks*

3.29 1.99 .49 black P7-3M-3M-3M $504.

three 3 pinmini-XLRjacks*

3.29 1.99 .49 grey P7GR-3M-3M-3M $517.

P7-VGA-USB data faceplate,one 15 pin HD VGA coupler,one USB A/A w/729 patch cord

one 15 pin HDVGA coupler,one USB A/Aw/729 patch cord

3.29 1.99 .49 black P7-VGA-USB $268.

one 15 pin HDVGA coupler,one USB A/Aw/729 patch cord

3.29 1.99 .49 grey P7GR-VGA-USB $281.

P7-USB-USB data faceplate,two USB A/A w/729 patch cord

two USB A/Aw/729 Patch cords

3.29 1.99 .49 black P7-USB-USB $172.

two USB A/Aw/729 Patch cords

3.29 1.99 .49 grey P7GR-USB-USB $186.

P7-VGA-MS-RCA data faceplate,one 15 pin VGA w/609 patch cord,one Mini-Stereo jack,one RCA (white, red and yellow) coupler

one 15 pin VGA,one Mini-Stereojack,*one set RCAcouplers- one leftaudio(white),one right audio(red),composite video(yellow)

3.29 1.99 .49 black P7-VGA-MS-RCA $335.

one 15 pin VGA,one Mini-Stereojack,*one set RCAcouplers- one leftaudio(white),one right audio(red),composite video(yellow)

3.29 1.99 .49 grey P7GR-VGA-MS-RCA $348.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



122 123



P7-VGA-MSI-RCA data faceplate,one 15 pin HD VGA coupler,one Mini-Stereo coupler,one set RCA (white, red and yellow) couplers

one 15 pin HDVGA coupler,one Mini-Stereocoupler,one set RCAcouplers- oneleft audio(white),one right audio(red),compostite video(yellow)

3.29 1.99 .49 black P7-VGA-MSI-RCA $387.

one 15 pin HDVGA coupler,one Mini-Stereocoupler,one set RCAcouplers- oneleft audio(white),one right audio(red),compostite video(yellow)

3.29 1.99 .49 grey P7GR-VGA-MSI-RCA $400.

P7-VGA-RCA data faceplate,one 15 pin HD VGA coupler,one set RCA (white, red and yellow) couplers

one 15 pin HDVGA coupler,one set RCAcouplers- oneleft audio(white),one right audio(red),composite video(yellow)

3.29 1.99 .49 black P7-VGA-RCA $318.

one 15 pin HDVGA coupler,one set RCAcouplers- oneleft audio(white),one right audio(red),composite video(yellow)

3.29 1.99 .49 grey P7GR-VGA-RCA $332.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



124 125



P7-DVI-VGA data faceplate,one DVI coupler,one 15 pin HD VGA coupler

one DVIin-line coupler,one 15 pin HDVGA coupler

3.29 1.99 .49 black P7-DVI-VGA $524.

one DVIin-line coupler,one 15 pin HDVGA coupler

3.29 1.99 .49 grey P7GR-DVI-VGA $538.

P7-DVI data faceplate,one DVI coupler

one CVIin-line coupler

3.29 1.99 .49 black P7-DVI $347.

one CVIin-line coupler

3.29 1.99 .49 grey P7GR-DVI $361.

P7-DVI-MS-MS data faceplate,one DVI in-line coupler,two mini stereo jacks

one DVI coupler,two Mini-Stereo jacks

3.29 1.99 .49 black P7-DVI-MS-MS $386.

one DVI coupler,two Mini-Stereo jacks

3.29 1.99 .49 grey P7GR-DVI-MS-MS $399.

P7-DVI-MSI-MSI data faceplate,one DVI coupler,two mini stereo in-line couplers

one DVI coupler,two Mini-Stereocouplers

3.29 1.99 .49 black P7-DVI-MSI-MSI $487.

one DVI coupler,two Mini-Stereocouplers

3.29 1.99 .49 grey P7GR-DVI-MSI-MSI $501.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



126 127



P7-HDMI data faceplate,one HDMI w/369 patch cord

one HDMI coupler,female/female w/369

patch cord

3.29 1.99 .49 black P7-HDMI $234.

one HDMI coupler,female/female w/369

patch cord

3.29 1.99 .49 grey P7GR-HDMI $248.

P7-HDMI-VGA-MS data faceplate,one HDMI w/369 patch cord,one VGA w/609 patch cord,one mini stereo jack

one HDMI coupler,one VGA,one Mini-Stereo jack

3.29 1.99 .49 black P7-HDMI-VGA-MS $430.

one HDMI coupler,one VGA,one Mini-Stereo jack

3.29 1.99 .49 grey P7GR-HDMI-VGA-MS $443.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



128 129



P7-HDMI-VGA-MSI data faceplate,one HDMI w/369 patch cord,one VGA w/609 patch cord,one mini stereo in-line coupler

one HDMI coupler,one VGA,one Mini-Stereoin-line coupler,female/female

3.29 1.99 .49 black P7-HDMI-VGA-MSI $479.

one HDMI coupler,one VGA,one Mini-Stereoin-line coupler,female/female

3.29 1.99 .49 grey P7GR-HDMI-VGA-MSI $493.

P7-VGA-MS-USB data faceplate,one 15 pin VGA w/609 patch cord,one Mini-Stereo jack,one USB A/A w/729 patch cord

one 15 pinVGA,one Mini-Stereojack*,one USB A/Bin-line coupler

3.29 1.99 .49 black P7-VGA-MS-USB $298.

one 15 pinVGA,one Mini-Stereojack*,one USB A/Bin-line coupler

3.29 1.99 .49 grey P7GR-VGA-MS-USB $312.

P7-VGA-MSI-USB data faceplate,one 15 pin VGA w/609 patch cord,one Mini-Stereo coupler,one USB A/A w729 patch cord

one 15 pinVGA ,one Mini-Stereocoupler,one USB A/Bin-line coupler

3.29 1.99 .49 black P7-VGA-MSI-USB $347.

one 15 pinVGA ,one Mini-Stereocoupler,one USB A/Bin-line coupler

3.29 1.99 .49 grey P7GR-VGA-MSI-USB $361.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



130 131



P7-RCA data faceplate,one set RCA (white, red and yellow) couplers

one set RCAcouplers- oneleft audio(white),one right audio(red),composite video(yellow)

3.29 1.99 .49 black P7-RCA $139.

one set RCAcouplers- oneleft audio(white),one right audio(red),composite video(yellow)

3.29 1.99 .49 grey P7GR-RCA $153.

P7-SV data faceplate,one S-Video coupler

one S-Video(SVHS), in-linecoupler

3.29 1.99 .49 black P7-SV $233.

one S-Video(SVHS), in-linecoupler

3.29 1.99 .49 grey P7GR-SV $246.

P7-DVI-SV data faceplate,one DVI coupler,one S-Video coupler

one DVIin-line coupler,one S-Video(SVHS) in-linecoupler

3.29 1.99 .49 black P7-DVI-SV $568.

one DVIin-line coupler,one S-Video(SVHS) in-linecoupler

3.29 1.99 .49 grey P7GR-DVI-SV $582.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



132 133



P7-X data faceplate,blank, no cut-outs

blank,no cut-outs

3.29 1.99 .49 black P7-X $8.

blank,no cut-outs

3.29 1.99 .49 grey P7GR-X $23.

P7-CM data faceplate,three cord minders

three cordminders

3.29 1.99 .49 black P7-CM $53.

three cordminders

3.29 1.99 .49 grey P7GR-CM $66.

Order Code


C3 RJ11 Cat. 3 jack

C6 RJ45 Cat. 6 jack

C6 RJ45 Cat. 6 jack




Finishes






Features





Construction



134 135

pattern no. page

P2-C02 18

P2-C04 18

P2-C06 18

P2-C10 18

P2-C12 18

P2-C13 18

P2-C14 18

P2-C15 18

P2-C16 18

P2-C17 18

P2-C-2 82

P2-C21 18

P2-C22 18

P2-C23 18

P2-C24 18

P2-C25 18

P2-C26 18

P2-C27 18

P2-C28 18

P2-C29 18

P2-C32 18

P2-C34 18

P2-C36 18

P2-CASTER4 82

P2-DOLLY24 22

P2-DOLLY26 22

P2-DOLLY34 22

P2-DOLLY36 22

P2-DOLLY-H 22

P2-F14 22

P2-F16 22

P2-F24 22

P2-F25 22

P2-F26 22

P2-F34 22

P2-F36 22

P2FT4811 78

P2FT4813 78

P2FT4818 78

P2FT6011 78

P2FT6013 78

P2FT6018 78

P2FT7211 78

P2FT7213 78

P2FT7218 78

P2-FT-BKT-MP 78

P2-GLIDE4 82

P2-H12 24

P2-H14 24

P2-H16 24

P2-H22 24

P2-H24 24

P2-H26 24

P2-H32 24

P2-H34 24

P2-H36 24

P2-M10 16

P2-M20 16

P2-M30 16

P2-N30 14

P2-N41 14

pattern no. page

P2-N52 14

P2-R02 14

P2-R04 14

P2-R06 14

P2-R10 14

P2-R12 14

P2-R14 14

P2-R16 14

P2-R21 14

P2-R22 14

P2-R24 14

P2-R25 14

P2-R26 14

P2-R32 14

P2-R34 14

P2-R36 14

P2-RLEG2KIT 82

P2-RLEG4KIT 82

P2-S92 16

P2-S94 16

P2-S96 16

P2-SC2411 72

P2-SC2413 72

P2-SC2418 72

P2-SC3011 72

P2-SC3013 72

P2-SC3018 72

P2-SC3611 72

P2-SC3613 72

P2-SC3618 72

P2-SC4211 72

P2-SC4213 72

P2-SC4218 72

P2-SC4811 72

P2-SC4813 72

P2-SC4818 72

P2-SC6011 72

P2-SC6013 72

P2-SC6018 72

P2-SC6611 72

P2-SC6613 72

P2-SC6618 72

P2-SC7211 72

P2-SC7213 72

P2-SC7218 72

P2-SC-BKT-MP 76

P2-SC-BKT-PS 76

P2-SC-BKT-PSD 76

P2-SC-BKT-PSE 76

P2-SC-BKT-PST 76

P2SCT2411 74

P2SCT2413 74

P2SCT2418 74

P2SCT3011 74

P2SCT3013 74

P2SCT3018 74

P2SCT3611 74

P2SCT3613 74

P2SCT3618 74

P2SCT4211 74

P2SCT4213 74

pattern no. page

P2SCT4218 74

P2SCT4811 74

P2SCT4813 74

P2SCT4818 74

P2SCT6011 74

P2SCT6013 74

P2SCT6018 74

P2SCT6611 74

P2SCT6613 74

P2SCT6618 74

P2SCT7211 74

P2SCT7213 74

P2SCT7218 74

P2-TCLEG2 82

P2-TCLEG218 82

P2-TLEG2 82

P2-TLEG4 82

P2-TTLEG2 82

P2-TTLEG30 82

P2-X30 26

P2-X36 26

P2-X42 26

P2-X48 26

P2-Y42 26

P2-Y48 26

P3-BD62 50

P3-BD64 50

P3-BD82 50

P3-BD84 50

P3-BD86 50

P3-BL42 32

P3-BL44 32

P3-BL46 32

P3-BL48 32

P3-BL50 32

P3-BL52 32

P3-BL54 32

P3-BL56 32

P3-BL62 32

P3-BL64 32

P3-BL66 32

P3-BL68 32

P3-BL70 32

P3-BL72 32

P3-BL74 32

P3-BL76 32

P3-BL82 32

P3-BL84 32

P3-BL86 32

P3-BL88 32

P3-BL90 32

P3-BL92 32

P3-BL94 32

P3-BL96 32

P3-BP50 60

P3-BP52 60

P3-BP54 60

P3-BP56 60

P3-BP70 60

P3-BP72 60

P3-BP74 60

pattern no. page

P3-BP76 60

P3-BP96 60

P3-CD30 52

P3-CD32 52

P3-CD34 52

P3-CD36 52

P3-CD38 52

P3-CD40 52

P3-CD50 52

P3-CD52 52

P3-CD54 52

P3-CD56 52

P3-CD58 52

P3-CD60 52

P3-CL10 36

P3-CL12 36

P3-CL14 36

P3-CL16 36

P3-CL18 36

P3-CL20 36

P3-CL22 36

P3-CL30 36

P3-CL32 36

P3-CL34 36

P3-CL36 36

P3-CL38 36

P3-CL40 36

P3-CL42 36

P3-CL50 36

P3-CL52 36

P3-CL54 36

P3-CL56 36

P3-CL58 36

P3-CL60 36

P3-CL62 36

P3-CLEG-C 82

P3-CLEG-F 82

P3-CLEG-PE 106

P3-CLEG-PR 104

P3-CP10 62

P3-CP12 62

P3-CP14 62

P3-CP16 62

P3-CP18 62

P3-CP20 62

P3-CP22 62

P3-CP30 62

P3-CP32 62

P3-CP34 62

P3-CP36 62

P3-CP38 62

P3-CP40 62

P3-CP42 62

P3-CP50 62

P3-CP52 62

P3-CP54 62

P3-CP56 62

P3-CP58 62

P3-CP60 62

P3-CP62 62

P3-DBASEL 84

Alpha-Numeric Index KnollStudio Vol. Two

136

pattern no. page

P3-DBASEL-W 84

P3-DBASEM 84

P3-DBASEM-W 84

P3-DBASES 84

P3-DBASES-W 84

P3-DD48 50

P3-DD54 50

P3-DD60 50

P3-DL48 30

P3-DL54 30

P3-DL60 30

P3-ED30 54

P3-ED32 54

P3-ED34 54

P3-ED36 54

P3-ED38 54

P3-ED40 54

P3-ED50 54

P3-ED52 54

P3-ED54 54

P3-ED56 54

P3-ED58 54

P3-ED60 54

P3-EL10 40

P3-EL12 40

P3-EL14 40

P3-EL16 40

P3-EL18 40

P3-EL20 40

P3-EL30 40

P3-EL32 40

P3-EL34 40

P3-EL36 40

P3-EL38 40

P3-EL40 40

P3-EL50 40

P3-EL52 40

P3-EL54 40

P3-EL56 40

P3-EL58 40

P3-EL60 40

P3-EP10 64

P3-EP12 64

P3-EP14 64

P3-EP16 64

P3-EP18 64

P3-EP20 64

P3-EP30 64

P3-EP32 64

P3-EP34 64

P3-EP36 64

P3-EP38 64

P3-EP40 64

P3-EP50 64

P3-EP52 66

P3-EP54 66

P3-EP56 66

P3-EP58 66

P3-EP60 66

P3-FD26 52

P3-FD30 52

P3-FD32 52

P3-FD34 52

P3-FD36 52

P3-FD38 52

pattern no. page

P3-FD46 52

P3-FD50 52

P3-FD52 52

P3-FD54 52

P3-FD56 52

P3-FD58 52

P3-FL06 38

P3-FL10 38

P3-FL12 38

P3-FL14 38

P3-FL16 38

P3-FL18 38

P3-FL26 38

P3-FL30 38

P3-FL32 38

P3-FL34 38

P3-FL36 38

P3-FL38 38

P3-FL46 38

P3-FL50 38

P3-FL52 38

P3-FL54 38

P3-FL56 38

P3-FL58 38

P3-FP06 62

P3-FP10 62

P3-FP12 62

P3-FP14 62

P3-FP16 62

P3-FP18 64

P3-FP26 64

P3-FP30 64

P3-FP32 64

P3-FP34 64

P3-FP36 64

P3-FP38 64

P3-FP46 64

P3-FP50 64

P3-FP52 64

P3-FP54 64

P3-FP56 64

P3-FP58 64

P3-J42 26

P3-J48 26

P3-KNOB8 82

P3-L30 26

P3-L36 26

P3-L42 26

P3-L48 26

P3-MD48 50

P3-MD54 50

P3-MD60 50

P3-ML42 30

P3-ML48 30

P3-ML54 30

P3-ML60 30

P3-ND64 50

P3-NL44 30

P3-NL46 30

P3-NL48 30

P3-NL50 30

P3-NL52 30

P3-NL54 30

P3-NL56 30

P3-NL64 30

pattern no. page

P3-NL66 30

P3-NL68 30

P3-NL70 30

P3-NL72 30

P3-NL74 30

P3-NL76 30

P3-NL88 30

P3-NL90 30

P3-NL92 30

P3-NL94 30

P3-NL96 30

P3-NP50 60

P3-NP52 60

P3-NP54 60

P3-NP56 60

P3-NP70 60

P3-NP72 60

P3-NP74 60

P3-NP76 60

P3-NP96 60

P3-PBASE 86

P3-PBASE-W 86

P3-RBASEL 86

P3-RBASEL-W 86

P3-RBASEM 86

P3-RBASEM-W 86

P3-RBASES 86

P3-RBASES-W 86

P3-RBASEXL 86

P3-RBASEXL-W 86

P3-RL40 34

P3-RL42 34

P3-RL44 34

P3-RL46 34

P3-RL48 34

P3-RL50 34

P3-RL52 34

P3-RL54 34

P3-RL56 34

P3-RL62 34

P3-RL64 34

P3-RL66 34

P3-RL68 34

P3-RL70 34

P3-RL72 34

P3-RL74 34

P3-RL76 34

P3-RL80 34

P3-RL82 34

P3-RL86 34

P3-RL88 34

P3-RL90 34

P3-RL92 34

P3-RL94 34

P3-RL96 34

P3-RP50 60

P3-RP52 60

P3-RP54 60

P3-RP56 60

P3-RP70 60

P3-RP72 60

P3-RP74 60

P3-RP76 60

P3-RP96 60

P3-RR68 56

pattern no. page

P3-RR72 56

P3-RR88 56

P3-RR92 56

P3-RS62 56

P3-RS64 56

P3-RS80 56

P3-RS82 56

P3-SBASEL 84

P3-SBASEL-W 84

P3-SBASEM 84

P3-SBASEM-W 84

P3-SBASES 84

P3-SBASES-W 84

P3-SL10 42

P3-SL12 42

P3-SL14 42

P3-SL16 42

P3-SL30 42

P3-SL32 42

P3-SL34 42

P3-SL36 42

P3-SL42 34

P3-SL48 34

P3-SL50 42

P3-SL52 42

P3-SL53 42

P3-SL54 34

P3-SL56 42

P3-SL60 34

P3-SP10 68

P3-SP12 68

P3-SP14 68

P3-SP16 68

P3-SP30 68

P3-SP32 68

P3-SP34 68

P3-SP36 68

P3-SP50 68

P3-SP52 68

P3-SP54 68

P3-SP56 68

P3-SS30 58

P3-SS32 58

P3-SS34 58

P3-SS36 58

P3-SS48 56

P3-SS50 58

P3-SS52 58

P3-SS53 58

P3-SS54 56

P3-SS56 58

P3-SS60 56

P3-TL10 44

P3-TL12 44

P3-TL14 44

P3-TL16 44

P3-TL18 44

P3-TL20 44

P3-TL30 44

P3-TL32 44

P3-TL34 44

P3-TL36 44

P3-TL38 44

P3-TL40 44

P3-TL50 44


137

pattern no. page

P3-TL52 44

P3-TL54 44

P3-TL56 44

P3-TL58 44

P3-TL60 44

P3-TLEGU-PE 106

P3-TLEGU-PE30 106

P3-TLEGU-PR 104

P3-TLEGU-PR30 104

P3-TP10 68

P3-TP12 68

P3-TP14 68

P3-TP16 68

P3-TP18 68

P3-TP20 68

P3-TP30 68

P3-TP32 68

P3-TP34 68

P3-TP36 68

P3-TP38 68

P3-TP40 68

P3-TP50 68

P3-TP52 68

P3-TP54 68

P3-TP56 68

P3-TP58 68

P3-TP60 68

P3-TS30 58

P3-TS32 58

P3-TS34 58

P3-TS36 58

P3-TS38 58

P3-TS40 58

P3-TS50 58

P3-TS52 58

P3-TS54 58

P3-TS56 58

P3-TS58 58

P3-TS60 58

P3-VL10 46

P3-VL12 46

P3-VL14 46

P3-VL16 46

P3-VL18 46

P3-VL20 46

P3-VL30 46

P3-VL32 46

P3-VL34 46

P3-VL36 46

P3-VL38 46

P3-VL40 46

P3-VL50 46

P3-VL52 46

P3-VL54 46

P3-VL56 46

P3-VL58 46

P3-VL60 46

P3-VP10 70

P3-VP12 70

P3-VP14 70

P3-VP16 70

P3-VP18 70

P3-VP20 70

P3-VP30 70

P3-VP32 70

pattern no. page

P3-VP34 70

P3-VP36 70

P3-VP38 70

P3-VP40 70

P3-VP50 70

P3-VP52 70

P3-VP54 70

P3-VP56 70

P3-VP58 70

P3-VP60 70

P3-VS30 58

P3-VS32 58

P3-VS34 58

P3-VS36 58

P3-VS38 58

P3-VS40 58

P3-VS50 58

P3-VS52 58

P3-VS54 58

P3-VS56 58

P3-VS58 58

P3-VS60 58

P4-AMP1145A 100

P4-AMP1145B 100

P4-AWB20 96

P4-AWB26 96

P4-AWB32 96

P4-AWB36 96

P4-AWB42 96

P4-GR 96

P4-MRI 96

P4-PDC-12 100

P4-PDC-21 100

P4-PDC-22 100

P4-PDC-24 100

P4-PP 96

P4-RW-C2 82

P4-RWDA 100

P4-RWDB 100

P4-RWDOX 100

P4-RWDOY 100

P4-RWDX 100

P4-RWDY 100

P4-RWIN4-CL 104

P4-RWIN4-CLE 106

P4-RWIN4-CR 104

P4-RWIN4-CRE 106

P4-RWIN4-REL 106

P4-RWIN4-RER 106

P4-RWIN4-RL 104

P4-RWIN4-RR 104

P4-RWIN4-T 104

P4-RWIN4-TE 106

P4-RWJ10 102

P4-RWJ17 102

P4-RWJ27 102

P4-RWJ37 102

P4-RWJ47 102

P4-RWJ57 102

P4-RWJ67 102

P4-RWM30 102

P4-RWM96 102

P4-RWMFJ10 102

P4-RWMFJ17 102

P4-RWMFJ27 102

pattern no. page

P4-RWMFJ37 102

P4-RWR48 100

P4-RWR60 100

P4-RWR66 100

P4-RWR72 100

P4-RWT 100

P4S-BOXM-E 92

P4S-BOXM-PP-11 90

P4S-BOXM-PP-4511 90

P4S-BOXM-PP-5 90

P4S-BOXM-PRA 94

P4S-BOXM-PRB 94

P4S-BOXS-PP-2 90

P4S-BOXS-PP-X 90

P4SD-BOXM-E 92

P4SD-BOXM-PP-11 90

P4SD-BOXM-PP-4511 90

P4SD-BOXM-PP-5 90

P4SD-BOXM-PRA 94

P4SD-BOXM-PRB 94

P4-WM4 84, 86

P4-WMT-18 96

P4-WMT-32 96

P4-WMT-44 96

P4-WMT-56 96

P4-WMT-96 96

P5-01 80

P5-02 80

P5-11 80

P5-12 80

P5-13 80

P5-14 80

P5-15 80

P5-21 80

P5-22 80

P5-23 80

P5-24 80

P5-25 80

P5-26 80

P5-27 80

P5-28 80

P5-29 80

P5-C 80

P5-D 80

P6-C02 20

P6-C04 20

P6-C06 20

P6-C12 20

P6-C14 20

P6-C16 20

P6-C22 20

P6-C24 20

P6-C26 20

P6-C32 20

P6-C34 20

P6-C36 20

P7-3M-3M 120

P7-3M-3M-3M 122

P7-3X-3X 120

P7-C3 108

P7-C3-C3-C6-C6 110

P7-C3-C6 108

P7-C3-C6-C6 108

P7-C3-C6-USB 118

P7-C3I-C3I 112

pattern no. page

P7-C5-C5 110

P7-C5-C5-C5 110

P7-C6 108

P7-C6-C6 108

P7-C6-C6-C6 110

P7-C6-C6-C6-C6 110

P7-CM 134

P7-DVI 126

P7-DVI-MSI-MSI 126

P7-DVI-MS-MS 126

P7-DVI-SV 132

P7-DVI-VGA 126

P7GR-3M-3M 120

P7GR-3M-3M-3M 122

P7GR-3X-3X 120

P7GR-C3 108

P7GR-C3-C3-C6-C6 110

P7GR-C3-C6 108

P7GR-C3-C6-C6 108

P7GR-C3-C6-USB 118

P7GR-C3I-C3I 112

P7GR-C5-C5 110

P7GR-C5-C5-C5 110

P7GR-C6 108

P7GR-C6-C6 108

P7GR-C6-C6-C6 110

P7GR-C6-C6-C6-C6 110

P7GR-CM 134

P7GR-DVI 126

P7GR-DVI-MSI-MSI 126

P7GR-DVI-MS-MS 126

P7GR-DVI-SV 132

P7GR-DVI-VGA 126

P7GR-HDMI 128

P7GR-HDMI-VGA-MS 128

P7GR-HDMI-VGA-MSI 130

P7GR-LC-LC 112

P7GR-LC-LC-C6-C6 112

P7GR-RCA 132

P7GR-SV 132

P7GR-USB-USB 122

P7GR-VGA-C3-C6 114

P7GR-VGA-C6 112

P7GR-VGA-C6-C6 114

P7GR-VGA-MS 120

P7GR-VGA-MS-C3-C6 114

P7GR-VGA-MS-C6 116

P7GR-VGA-MS-C6-C6 118

P7GR-VGA-MSI 120

P7GR-VGA-MSI-C3-C6 116

P7GR-VGA-MSI-C6 116

P7GR-VGA-MSI-C6-C6 118

P7GR-VGA-MSI-RCA 124

P7GR-VGA-MSI-USB 130

P7GR-VGA-MS-RCA 122

P7GR-VGA-MS-USB 130

P7GR-VGA-RCA 124

P7GR-VGA-USB 122

P7GR-X 134

P7-HDMI 128

P7-HDMI-VGA-MS 128

P7-HDMI-VGA-MSI 130

P7-LC-LC 112

P7-LC-LC-C6-C6 112

P7-RCA 132


138

pattern no. page

P7-SV 132

P7-USB-USB 122

P7-VGA-C3-C6 114

P7-VGA-C6 112

P7-VGA-C6-C6 114

P7-VGA-MS 120

P7-VGA-MS-C3-C6 114

P7-VGA-MS-C6 116

P7-VGA-MS-C6-C6 118

P7-VGA-MSI 120

P7-VGA-MSI-C3-C6 116

P7-VGA-MSI-C6 116

P7-VGA-MSI-C6-C6 118

P7-VGA-MSI-RCA 124

P7-VGA-MSI-USB 130

P7-VGA-MS-RCA 122

P7-VGA-MS-USB 130

P7-VGA-RCA 124

P7-VGA-USB 122

P7-X 134


139

This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions

of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is generally issued upon shipment.In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due withinthirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changes andCancellation

Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc. andwithin Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is tested forrigorous motion and transportation but is not guaranteed to protect furniture from all conditions. If special packaging is required for any reason, please consultwith your sales representative or dealer. Seller shall select the method of shipment and routing. Freight for all KnollTextiles orders is prepaid and added to theinvoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.

Selling Policy

141March 15, 2020

Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of Warranty

Lifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template, Quoin and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2Veneer Front Storage, digital locks, uphostery, textiles and leathers, special or custom products, see below)

12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (exceptseating upholstery, textiles, leathers and finishes, see below).

10 Years: Anchor Storage except digital locks, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon Satellite Surfaces,Reff Profiles, Rockwell Unscripted, Quoin wood components, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, WoodCasegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra SapperMonitor Arm Collection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric boardtextiles, cork and FilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structuralcomponents, KnollStudio Pixel and Propeller, Tone bases and k.screens.

5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio, Rockwell Unscripted wire bases, Spark Series seating structural elements, structural elements of allKnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers and Power Collection,k. bench (except changes in finish, see below) and k. stand bases (except changes in finish, see below).

3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens.

2 Years: Anchor Storage digital locks, Quoin digital locks, all other KnollExtra product and KnollTextiles Ultrasuede.

1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio, outdoorproduct finishes, k. lounge upholstery and k. lounge fabric. Rockwell Unscripted fabric and accessories, Spinneybeck leathers, and KnollTextiles upholsteryexcept Ultrasuede.

This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable

warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, withrespect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, actof any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.

Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.

Selling Policy

142March 15, 2020

General Ordering Information

The ProductsThis guide encompasses all standard products for this product group.

SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius

PricingAll prices shown are list.

How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.

Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.

On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.

To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.

Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry

Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.

Sustainability Statement

Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.

For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’

143

Propeller - Knoll

Documents

Transcript of Propeller - Knoll