PROMOTION 2017 / EN - Gedore...excl. VAT €47, 80 €499, 00 PROMOTION 2017 / EN 1045 mm 510 mm 785...

gedore.com

NEW

WSL-L7

TOOL TROLLEY

WORKSTER SMARTLINE

1000 TOOL

CASE

TOURING

49 PIECES

DT 2142-008 HEXAGON

ALLEN KEY

SET

8 PIECES

€349, 00 excl. VAT

€47, 80 excl. VAT

€499, 00 excl. VAT

PROMOTION 2017 / EN

1045

mm

510 mm 785 mm

MAGIC

WSL-L7 TOOL TROLLEY WORKSTER SMARTLINEWITH 7 DRAWERS

INDIVIDUAL COMPONENTS AT A GLANCETool assortment WSL-BAK

GEDORE workster smartline - the manoeuvrable, easy-to-steer workshop aid which can be fitted out in so many ways.A sound construction design, extreme manoeuvrability and various ways of stowing away tools and small parts ready-to-be-accessed turn the new workster into an indispensable aid.Seven broad fully extendable drawers and small trays on the working platform provide ample room. The intelligent workster also comes over well thanks to its sturdy, scratch-free coated structure and a drive/steer handle for easy and flexible manoeuvring even under a full load.

› Dimensions: H 1045 x W 785 x D 510 mm

› Welded sheet steel construction, torsionally rigid, to take high loadings

› Sheet steel, corrosion resistant and scratch-proof powder-coated

› Individual blocking only one drawer

can be open at a time, single-hand operation

› Further detailed information on the tool trolley on page 008

WSL-BAK TOOL TROLLEY WORKSTER WITH 147-PIECE TOOL ASSORTMENT + CORDLESS DRILL DRIVER BOSCH + 1990 M EXTENSION

› 147-piece assortment for industrial, automotive and craft sector

› In tool trolley WSL-L7

› GEDORE Check-Tool-System: 2-colour foam insert to check that the set is complete

› Tools in metric sizes

› PLUS Extension with magnet no. 1990 M

› PLUS Cordless drill driver BOSCH GSR 10.8-2-LI plus accessories in tool bag

Contents 0 Code No.

TS CT2-D19-D20, TS CT2-7 , TS CT2-2154SK-119, TS CT2-142, 1990 M , BOSCH GSR 10,8-2 LI, WSL-L7 90.9 3014282 WSL-BAK

As long as stock lasts

HIGHLIGHT

€969, 00 excl. VAT

b h 127 mmb 8 97 mmb 7 115 mmR 3 4 5 5,5 6 7 8 9 10 11 12 13 mmR i E4 E5 E6 E7 E8 E10D l 4 5,5 6,5 8 mmD h 2,5 3 4 5 6 mm

D j T6 T7 T8 T9D . M5 M6 M8D k PH1 PH2 PH3D m PZ1 PZ2 PZ3 T10 T15 T20 T25 T27 T30 T40b D D b Y

D Y I d h 270 mmd 8 63 mmd 8 125 + 250 mmT 3 10 11 12 13 14 15 16 17 18 19 21 22 24 27 30 32 mmT 5 5 6 7 8 9 10 12 14 mm

ì 3 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 mmA 2 2,5 3 4 5 6 8 10 mm

l 3,5 5,5 6,5 8 mmk PH1 PH2o 500 gá 120x12x5 mm

á 1,5 3 4 mmç 250x24 mmç 125x10x5 mmá 120x12x5 mm

003002

1990 M EXTENSION 1/2"

WITH MAGNET

GSR 10.8-2-LI + ACCESSORIES IN TOOL BAG

› User benefit

› At 169 mm it has an extremely short design for optimum handling

› Professional performance: 2-speed gearbox ensures a powerful 15

N·m (soft screwdriving application) when drilling and screwdriving

› Longer run-time due to 2x 2.0 Ah battery pack

› Technical data

› No-load speed 0-400/1300 rpm

› Torque, max. (hard/soft) 30/15 N·m

› Torque settings 20+1

› Max. drilling Ø in steel/wood 10/19 mm

› Max. screw Ø 7 mm

› Weight net/gross 2.5/2.8 kg

› Scope of delivery

› 2x 2.0 Ah Li-Ion Battery

› Charger AL 1115 CV

› Tool bag

› 39-piece accessory set

TS CT2-D19-D20

› Universal pliers 10" 15 settings

› Power combination pliers 180 mm

› Multiple pliers 200 mm

› Power side cutter 180 mm

›l Ø 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5

7 7.5 8 8.5 9 9.5 10 10.5 / Ø 3.3 4.2 6.8 10.2

TS CT2-7 TS CT2-2154SK-119 TS CT2-142

od

MAGIC

19 DMU-20 SOCKET SET 1/2"15 pieces

› Based on daily workshop routines

› With forged, tempered hexagon UD profile sockets, hand-operated

› Accessories made from GEDORE vanadium steel 31CrV3

› With robust lever-change reversible ratchet, with push-button release

› With universal extension, is able to pivot up to 15°

Ratchet Sockets Accessories 0 Code No.

_ 1993

U-20

1 19 10 12 13 15 16 17

18 19 22 24 27 30 32

' 1990

KR-10

2.9 3014347 19 DMU-20

For trade and industry: GEDORE 1/2" socket set

Workshop daily routine lies behind the composition of this 15-piece 1/2" set.The set sockets are hot-forged from GEDORE 31CrV3 vanadium steel and tempered and fitted out with the tried-and-tested GEDORE hexagon unit drive profile.The corner piece of the set is the1993 U-20 reversible lever change ratchet with push-button release. Rounding off the set is a universal extension with a return angle up to 15 degrees. This set is delivered in a small, compact plastic box with inspection window for an easy completeness check.

HIGHLIGHT

€89, 90 excl. VAT

OT

005004

GEDORE 1/2" screwdriver set: clearly arranged and universally deployableThe GEDORE IN 19-009 screwdriver set contains nine screwdriver sockets for long in-hex screws in acc. with DIN 7422. Fitted out with internal square drive and ball retaining groove, the sockets are suited for hand operation. Matt chrome-plating and cross-knurling ensure the socket grips firmly; the pin is of GEDORE vanadium special-steel and manganese-phosphated. This set is delivered in a small, compact plastic box with inspection window for an easy completeness check.

IN 19-009 SCREWDRIVER BIT SOCKET SET 1/2"9 pieces

› For in-hex screws

› With hand-operated screwdriver bit sockets

› Practical set composition for all lots

Sockets 0 Code No.

5 IN 19 4

5 IN 19 L 5-90 6-90 7-140

8-140 9-140 10-140 12-140

14-140

1.9 3014444 IN 19-009

HIGHLIGHT

€49, 90 excl. VAT

winner

MAGIC

2150-2160 PH-06 3C-SCREWDRIVER SET6 pieces

› For slotted and cross-head screws PH

Contents 0 Code No.

? 2150 4 5,5 6,5 8

; 2160 PH 1 2

0.660 1482319 2150-2160 PH-06

2150-2160 PZ-06 3C-SCREWDRIVER SET6 pieces

› For slotted and cross-head screws PZ

Contents 0 Code No.

? 2150 4 5,5 6,5 8

< 2160 PZ 1 2

0.670 1482300 2150-2160 PZ-06

SK 2154 PH-06 3C-SCREWDRIVER SET WITH STRIKING CAP6 pieces

› For firmly seated slotted

and cross-head screws PH

› Blade with hexagon bolster

Contents 0 Code No.

? 2154SK 4,5 5,5 6,5 8

; 2160SK PH 1 2

0.880 1878743 SK 2154 PH-06

The GEDORE 3C screwdriver - practical and ergonomicThe 3C screwdrivers for slotted and cross-slotted screws have an ergonomic 3-component Power Grip for precise, fatigue-free working. The positive connection fit between handle and blade ensures an optimum transfer of power and makes it easier to tighten and loosen very stiff screws. The "made by GEDORE" screwdriver - excellently designed and with its clear-cut contours - is here in the practical 6-piece set composition.

HIGHLIGHT

€13, 95 excl. VAT

€13, 95 excl. VAT

HIGHLIGHT

€24, 95 excl. VAT

iO ö 1000 V

007006

VDE 2170-2160 PH-077 VDE SCREWDRIVER SET7 pieces


› VDE insulation up to 1000 V,

acc. to EN 60900/IEC 60900, fully insulated blade

Contents 0 Code No.

? VDE 2170 2,5 4 5,5 6,5

; VDE 2160 PH 0 1 2

0.575 1616048 VDE 2170-2160 PH-077

From the practical world: GEDORE pliers setThe practical set is made up of a pair of universal pliers, a pair of power combination pliers and a power side cutter. All cutting pliers are fitted out with BCP = Best Cutting Power i.e. the optimum cutting point under perfect power utilisation is shown at the pliers head. The universal pair of pliers is 15-fold precision-adjustable and through the pliers head push-button both safe and easy to use. They rule out any unintentional adjustment or slipping when undertaking pipe work. The power combination pliers provide considerable leverage for ease in cutting all wires, including piano wire. The convex handle shape of the power side cutter ensures a high and even transfer of power. Its thin head also comes into own when space is at a premium.

S 8393 PLIERS SET3 pieces

› Practical set composition

› Consisting of universal pliers 142 10 TL, power combination pliers 8250-200 JC

and power side cutter 8314-180 JC, Swedish pattern

› Best cutting power (Bcp) reveals the optimum cutting point under perfect power utilisation

Contents 0 Code No.

142 10 TL

8250-200 JC

8314-180 JC

1.071 3012859 S 8393

HIGHLIGHT

€34, 90 excl. VAT

HIGHLIGHT

€19, 95 excl. VAT

1045

mm

510 mm 785 mm

MAGIC

WSL-L7 TOOL TROLLEY WORKSTER SMARTLINEwith 7 drawers


› Welded sheet steel construction, torsionally rigid, to take high loadings

› Sheet steel, corrosion resistant and scratch-proof powder-coated

› Individual blocking only one drawer can be open at a time,

single-hand operation

› Central locking with cylinder lock

› 7 wide drawers (W 640 x D 400 mm) fully extendable

› Load capacity per drawer 20 kg

› Total load capacity 400 kg

› 4 smooth running wheels on ball bearings (swivel castors Ø 125 mm),

one with total brake

0 Code No.

81.0 2977311 WSL-L7

€499, 00 excl. VAT

009008

WSL-L-TS-147 TOOL TROLLEY WITH 147-PIECE TOOL ASSORTMENT

Contents 0 Code No.

WSL-L7 + TS-147 92.3 2980312 WSL-L-TS-147


Contents 0 Code No.

WSL-L7 + TS-190 97.6 2980320 WSL-L-TS-190


Contents 0 Code No.

WSL-L7 + TS-308 109.6 2980347 WSL-L-TS-308

WSL-BAK TOOL TROLLEY WORKSTER WITH 147-PIECE TOOL ASSORTMENT + CORDLESS DRILL DRIVER BOSCH + 1990 M EXTENSION

Contents 0 Code No.

WSL-L7 + BAK 90.9 3014282 WSL-BAK

› Detailed listing of the contents on page 016




AS SET WITH ASSORTMENTTool trolley WSL-L7

As long as stock lasts

€899, 00 excl. VAT

€1249, 00 excl. VAT

€1899, 00 excl. VAT

HIGHLIGHT

€969, 00 excl. VAT

985

mm

475 m

m

775 mm

MAGIC

2005 0511 TOOL TROLLEYwith 7 drawers



› Wide drawers (W 640 x D 400 mm), fully extendable, removable

› Single-hand operation with safety locking

› Load capacity per drawer 40 kg, bottom heavy-duty drawer 60 kg


0 Code No.

93.0 1803018 2005 0511

2005-TS-147 TOOL TROLLEY WITH 147-PIECE TOOL ASSORTMENT

Contents 0 Code No.

2005 0511 + TS-147 104.3 2980282 2005-TS-147


Contents 0 Code No.

2005 0511 + TS-190 109.6 2980290 2005-TS-190


Contents 0 Code No.

2005 0511 + TS-308 121.6 2980304 2005-TS-308




AS SET WITH ASSORTMENTTool trolley 2005 0511

€799, 00 excl. VAT

€1199, 00 excl. VAT

€1399, 00 excl. VAT

€2249, 00 excl. VAT

985

mm

475 m

m

775 mm

mbodhj

mbodeihj

011010

2005 0810 TOOL TROLLEYwith 9 drawers



› Wide drawers (W 640 x D 400 mm), fully extendable, removable

› Single-hand operation with safety locking



0 Code No.

99,0 2003562 2005 0810

1500 ES-02-2004 TOOL TROLLEY WITH 207-PIECE TOOL ASSORTMENT

Contents 0 Code No.

2004 0620 + S 1500 ES-02 117,1 2657708 1500 ES-02-2004

1500 ES-03 2004 TOOL TROLLEY WITH 325-PIECE TOOL ASSORTMENT

Contents 0 Code No.

2004 0810 + S1500 ES-03 125,8 2657716 1500 ES-03-2004

› Detailed information

on the tool trolley on page 022

› Detailed information

on the tool trolley on page 024

€829, 00 excl. VAT

€1539, 00 excl. VAT

€2249, 00 excl. VAT

930

mm

375 mm

605 mm

985

mm

550 mm

1100 mm

985

mm

550 m

m

1250 mm

MAGIC

1578 TOOL TROLLEYwith 6 drawers



› 6 wide drawers (W 480 x D 325 mm), extendable to both sides

› Load capacity per drawer 20 kg


0 Code No.

43.5 9018140 1578

1504 0511 MOBILE WORKBENCHwith 7 drawers

› Drawers with single-hand operation and safety locking


› Central locking for cylinder lock

› Static load capacity 700 kg, 500 kg when mobile


0 Code No.

103.0 6622830 1504 0511

1506 XL 2511 MOBILE WORKBENCH EXTRA WIDTH

0 Code No.

140.0 2528088 1506 XL 2511

› Single-hand operation with safety locking which prevents the drawers from opening when in motion





€359, 00 excl. VAT

€999, 00 excl. VAT

€1299, 00 excl. VAT

985

mm

550 m

m

1250 mm

013012

POWER CAPACITY

The sturdy XL mobile workbench, which has proved its worth on innumerable occasions, is fitted out with a large-sized worktop, the 1050 mm wide top drawer has room enough for either an extremely long tool or six 1/3 modules of the GEDORE module system. All drawers can take weights of up to 40 kgs – even 60 kgs is the limit for the bottom drawer. The proven single-hand operation coupled with safety locking stops the drawers from unintentionally opening when the workbench is pushed. The heavy-duty chassis is mounted on roller bearings, its two Ø 125 mm flexible castors and two Ø 200 mm fixed castors ensure easy manoeuvrability. And finally its 700 kg static load capacity and capacity to take up to 500 kg under mobile deployment conditions make it a sturdy aid in any workshop.

1504 XL MOBILE WORKBENCH EXTRA WIDTH

› Single-hand operation with safety locking which prevents

the drawers from opening when in motion





0 Code No.

120.0 1988468 1504 XL

1504 XL-TS-308 WORKBENCH WITH 308-PIECE TOOL ASSORTMENT

Contents 0 Code No.

1504 XL + TS-308 148.6 2980355 1504 XL-TS-308


AS SET WITH ASSORTMENTMobile workbench 1504 XL

€1229, 00 excl. VAT

HIGHLIGHT

€2549, 00 excl. VAT

1172

mm

526 mm 396 mm

MAGIC

1110 WMW-S-02 TOOL ASSORTMENT FOR WORKMO W272 pieces

› Modular tool trolley

› Ideal for major and minor maintenance and assembly work

› For industry, the trades, automotive and the ambitious do-it-yourselvers

› The right GEDORE assortment, as required,

for trainees, apprentices and do-it-yourselvers

Contents 0 Code No.

1110 WMW-2

1100 L

1110 CTB2-01

1110 CTB2-02

50.5 3005186 1110 WMW-S-02

411-150 PARALLEL VICE

› Sturdy forged design

› Jaws and anvil plate induction hardened

› Protected vice spindle

› Adjustable guidance

W O Code No.

150 200 6501290 411-150

1110 WMW-2 TOOL TROLLEY WORKMO W2


› Ideal for transportation from the workshop to changing workplaces

› 6 drawers fully extendable suited for GEDORE 1500 ES/1500 CT modules

› One compartment with locking device for GEDORE L-BOXX® 136 no. 1100 L (not included)

› Compatible with Sortimo® vehicle equipments and load securing

› Dimensions: W 526 x D 396 x H 1172 mm

› Weight advantage (up to 50 % lighter than comparable solutions!)

0 Code No.

42.6 2954435 1110 WMW-2

AS SET WITH ASSORTMENTWorkmo W2

€999, 00 excl. VAT

€198, 00 excl. VAT

€699, 00 excl. VAT

1172

mm

789 mm 396 mm

015014

1110 WMW-3 TOOL TROLLEY WORKMO W3


› Ideal for transportation from the workshop to changing workplaces

› 6 drawers fully extendable suited for GEDORE 1500 ES/1500 CT modules

› One compartment with locking device for GEDORE L-BOXX® 136 no. 1100 L

and GEDORE S-BOXX® no. 1110 WMSB 3 (both not included)

› Compatible with Sortimo® vehicle equipments

and load securing


› Weight advantage (up to 50 % lighter than comparable solutions!)

0 Code No.

52.8 2954443 1110 WMW-3

1110 WMW-S-03 TOOL ASSORTMENT FOR WORKMO W3110 pieces


› Ideal for major and minor maintenance and assembly work

› For industry, the trades, automotive and the ambitious do-it-yourselvers

› The right GEDORE assortment, as required, for trainees, apprentices and do-it-yourselvers

Contents 0 Code No.

1110 WMW-3

1100 L

1110 WMSB 3

1110 CTB3-01

1110 CTB3-02

64.3 3005194 1110 WMW-S-03

AS SET WITH ASSORTMENTWorkmo W3

€949, 00 excl. VAT

€1499, 00 excl. VAT

MAGIC

TS-147 TOOL ASSORTMENT IN CHECK-TOOL-MODULES147 pieces




Contents 0 Code No.

TS CT2-D19-D20, TS CT2-7, TS CT2-2154SK-119, TS CT2-142 11,3 2955997 TS-147





Contents 0 Code No.

TS CT2-D19-D20, TS CT2-7, TS CT2-2154SK-119, TS CT2-142, TS CT2-6-8000, TS CT2-ITX19 16,6 2956527 TS-190

€599, 00 excl. VAT

€899, 00 excl. VAT

mbod

017016





Contents 0 Code No.

TS CT2-D19-D20, TS CT2-7, TS CT2-2154SK-119, TS CT2-142, TS CT2-6-8000

TS CT2-ITX19, TS CT2-2133-2163TX, TS CT2-7R-2, TS CT2-D30, TS CT2-710, 407

28,6 2956535 TS-308

S 1500 ES-01 MODULE ASSORTMENT SMALL104 pieces

Contents 0 Code No.

1500 ES-1 B, 1500 ES-19, 1500 ES-1993 U-20, 1500 ES-20, 1500 ES-145, 1500 ES-350, 1500 ES-2150 PH 12,1 2319845 S 1500 ES-01

› In ES modules from impact resistant ABS


€1699, 00 excl. VAT

€656, 00 excl. VAT

mbodhj

mbodeihj

MAGIC

S 1500 ES-03 MODULE ASSORTMENT LARGE325 pieces



Contents 0 Code No.

1500 ES-1 B, 1500 ES-19 IS, 1500 ES-1993 U-20, 1500 ES-2, 1500 ES-2 B, 1500 ES-20, 1500 CTD-20 BIT, 1500 ES-2133, 1500 ES-2150 PH

1500 ES-2163 TX, 1500 ES-34, 1500 ES-350, 1500 ES-400, 1500 ES-6, 1500 ES-7 R, 1500 ES-711, 1500 ES-8000, 1500 ES-DT 2142

1500 ES-IN 19 LKM, 1500 ES-ITX 19 LKP, 1500 ES-K 1900, 1500 ES-VDE 145, 1500 ES-VDE 2170 PZ8551-55, H 42 KEL-88, H 43 KTX-07

8728, 60 P 8, 137 10, 4615 3, 0513-09, 1940, 1500 ED-70 K [7x]

34,8 2319861 S 1500 ES-03

S 1500 ES-02 MODULE ASSORTMENT MIDDLE207 pieces



Contents 0 Code No.

1500 ES-1 B, 1500 ES-6, 1500 ES-19 IS, 1500 ES-ITX 19 LKP, 1500 ES-IN 19 LKM, 1500 ES-1993 U-20, 1500 ES-20, 1500 ES-2133

1500 ES-7 R, 1500 ES-145, 1500 ES-350, 1500 ES-711, 1500 ES-2150 PH, 1500 ES-K 1900, 1500 ES-8000, 1500 ED-70 K [6x]

29,1 2319853 S 1500 ES-02

€1879, 00 excl. VAT

€1299, 00 excl. VAT

od!

019018

1000 TOOL CASE TOURING49 pieces

› Universal GEDORE tool set, 49 pieces, for highest requirements

› Neatly and clearly arranged tools - laid out in foam cut out tool control system

› Space-saving and robust in tough plastic case, resistant to oil

Contents 0 Code No.

Tool set TOURING S 1000

+ tool case WK 1000 L

7,0 6600780 1000

With the GEDORE TOURING tool case the right tool is always and everywhere on hand. Whether it be small repair jobs on the washing machine, lawn mower or car – the 49-piece tool set meets the many requirements from the practical world. The practical plastic case ensures that all the tools are kept in place when being carried around. As such, the TOURING is your sturdy companion when you are on the go.

The 49-piece GEDORE TOURING tool case – catering for all jobs in the home

HIGHLIGHT

€349, 00 excl. VAT

OT OT

OT OT

od

MAGIC

1500 CT1-19 SOCKET SET 1/2", HEXAGONin 1/3 CT tool module

Contents 0 Code No.

19 10 11 12 13 14 15 16 17 18 19 21

22 23 24 26 27 28 30 32

5 IN 19 6 7 8 9 10 12 14

2.790 2308908 1500 CT1-19

1500 CT1-D 19 SOCKET SET 1/2", UD PROFILEin 1/3 CT tool module

Contents 0 Code No.

3 D 19 10 11 12 13 14 15 16 17 18 19

21 22 23 24 26 27 28 30 32

5 IN 19 6 7 8 9 10 12 14

2.680 2308916 1500 CT1-D 19

1500 CT1-IN 19 LKM SCREWDRIVER BIT SOCKET SET 1/2"in 1/3 CT tool module

Contents 0 Code No.

5 IN 19 5 6 7 8 9 10 12 14 17

5 IN 19 L 5-90 6-90 8-90 10-140 12-140

14-140

1.900 2308932 1500 CT1-IN 19 LKM

1500 CT1-ITX 19 LKP SCREWDRIVER BIT SOCKET SET 1/2"in 1/3 CT tool module

Contents 0 Code No.

7 ITX 19 T20 T25 T27 T30 T40 T45 T50

T55 T60

7 ITX 19 L T20-100 T25-100 T27-100

T30-100 T40-100 T45-100 T50-100 T55-100

T60-100

708

1.915 2308940 1500 CT1-ITX 19 LKP

1500 CT1-1993 T ACCESSORIES FOR SOCKET WRENCHES 1/2"in 1/3 CT tool module

Contents 0 Code No.

1993 U-10 T, 1987, 1995

1990-5 -10

1.765 2309106 1500 CT1-1993 T

€129, 00 excl. VAT€129, 90 excl. VAT

€99, 90 excl. VAT€174, 00 excl. VAT

€99, 90 excl. VAT

mb

nc NS

BA M N

021020

1500 CT1-20 SOCKET SET 1/4"in 1/3 CT tool module

Contents 0 Code No.

1 20 4 5 5,5 6 7 8 9 10 11 12 13 14

5 IN 20 3 4 5 6 8

7 ITX 20 T8 T9 T10 T15 T20 T25 T27 T30 T40

9 TX 20 E4 E5 E6 E7 E8 E10

2087 2090-4 2095 2098

2093 U-10

0.845 2308967 1500 CT1-20

1500 CT1-2133 SOCKET WRENCH SETin 1/3 CT tool module

Contents 0 Code No.

1 2133 5,5 6 7 8 9 10 0.820 2309122 1500 CT1-2133


Contents 0 Code No.

30 6 7 8 9 10 11 12 13 14 15 16 17 18 19

5 IN 30 4 5 6 8 10

3095 3087

3090-5 -10

3093 U-10

1.670 2308975 1500 CT1-30

1500 CT1-ITX 30 SCREWDRIVER BIT SOCKET SET 3/8"in 1/3 CT tool module

Contents 0 Code No.

5 IN 30 L 4 5 6 7 8 10

7 ITX 30 T20 T25 T27 T30 T40 T45 T50

7 ITX 30 L T20 T25 T27 T30 T40 T45 T50

9 TX 30 E5 E6 E7 E8 E10 E11 E12 E14

? IS 30 5,5 6,5 8 10 12

; IKS 30 1 2 3

< IKS 30 PZD 1 2 3

2.175 2308983 1500 CT1-ITX 30

1500 CT1-8000 CIRCLIP PLIERSin 1/3 CT tool module

Contents 0 Code No.

8000 A 1, 8000 A 2, 8000 A 21

8000 J 1, 8000 J 2 , 8000 J 21

1.010 2309181 1500 CT1-8000


€169, 00 excl. VAT€263, 00 excl. VAT

€64, 50 excl. VAT

MAGIC

1500 CT1-2163 TXB SCREWDRIVER SETin 1/3 CT tool module

Contents 0 Code No.

8 2163 TXB T10 T15 T20 T25 T30 T40 0.500 2309165 1500 CT1-2163 TXB

1500 CT1-2150 PZ SCREWDRIVER SETin 1/3 CT tool module

Contents 0 Code No.

? 2150 4 5,5 6,5 8

< 2160 PZ 1 2

0.630 2309149 1500 CT1-2150 PZ

1500 CT1-2150 PH SCREWDRIVER SETin 1/3 CT tool module

Contents 0 Code No.

? 2150 4 5,5 6,5 8

; 2160 PH 1 2

0.630 2309130 1500 CT1-2150 PH

1500 CT1-2163 TX SCREWDRIVER SETin 1/3 CT tool module

Contents 0 Code No.

7 2163 TX T8 T10 T15 T20 T25 T30 0.400 2309157 1500 CT1-2163 TX

1500 CT1-2 DOUBLE ENDED RING SPANNER SETin 1/3 CT tool module

Contents 0 Code No.

3 2 6x7 8x9 10x11 12x13 14x15 16x17

18x19 20x22

1.360 2308827 1500 CT1-2

1500 CT1-400 SET OF OPEN FLARE NUT SPANNERSin 1/3 CT tool module

Contents 0 Code No.

1 3 400 8x10 10x11 12x14 13x15 17x19 0.565 2309068 1500 CT1-400

€41, 00 excl. VAT


€37, 80 excl. VAT


TPiO ö 1000 V iO ö 1000 V

TP

023022

1500 CT1-6 OPEN ENDED SPANNER SETin 1/3 CT tool module

Contents 0 Code No.

6 6x7 8x9 10x11 12x13 14x15 16x17 18x19

20x22 21x23 24x27

1.440 2308851 1500 CT1-6

1500 CT1-7 R COMBINATION RATCHET SPANNER SETin 1/3 CT tool module

Contents 0 Code No.

3 7 R 8 10 12 13 14 15 16 17 18 19 1.240 2308894 1500 CT1-7 R

1500 CT1-7 UR COMBINATION RATCHET SPANNER SET, REVERSIBLEin 1/3 CT tool module

Contents 0 Code No.

3 7 UR 8 10 12 13 14 15 16 17 18 19 1.245 2331969 1500 CT1-7 UR

1500 CT1-VDE 142 VDE PLIERS SETin 1/3 CT tool module

Contents 0 Code No.

142 10 C , VDE 8250-180 H

VDE 8132-160 H, VDE 8314-160 H

1.160 2309033 1500 CT1-VDE 142

1500 CT1-VDE 2170 PZ VDE SCREWDRIVER SETin 1/3 CT tool module

Contents 0 Code No.

? VDE 2170 4 5,5 6,5 8

< VDE 2160 PZ 1 2

0.625 2309173 1500 CT1-VDE 2170 PZ

1500 CT1-142 PLIERS SETin 1/3 CT tool module

Contents 0 Code No.

142 10 JC , 8250-180 JC

8132-160 JC, 8316-160 JC

1.220 2309025 1500 CT1-142


€173, 50 excl. VAT


€79, 80 excl. VAT

pe

MAGIC

1500 CT1-350 CHISEL SETin 1/3 CT tool module

Contents 0 Code No.

97-250 , 98-125 , 99 12-5

100-12 , 19-1,5 3 4 , 600 H-300

1.425 2309041 1500 CT1-350

1500 CT2-7 COMBINATION SPANNER SETin 2/3 CT tool module

Contents 0 Code No.

3 7 6 7 8 9 10 11 12 13 14 15 16 17 18

19 20 21 22

5 PH 42-88 (2 2,5 3 4 5 6 8 10)

1.750 2308878 1500 CT2-7

1500 CT2-7-32 COMBINATION SPANNER SETin 2/3 CT tool module

Contents 0 Code No.

3 7 23 24 27 30 32 1.865 2308886 1500 CT2-7-32

1500 CT2-DT 2142 HEXAGON SOCKET KEY SETin 2/3 CT tool module

Contents 0 Code No.

5 DT 2142 2 2,5 3 4 5 6 7 8 10 0.900 2309009 1500 CT2-DT 2142


› Dimensions: 472.5 x 390 x 50 mm

› Suitable for:

› all drawers of models B 1500, 1502, 1505

› only drawers with height 137 and 207 mm of models 1504, 1504 XL, 1506 XL, 2004, 2005, workster

› For XL drawers of models 2005, WSL-L7 and 1504 XL

Contents 0 Code No.

32 22 24 27 30 32 36 38 41 46 50

3290-8 -16, 3293 U-2, 3287

9.0 2752727 2005 CT3-32



€287, 00 excl. VAT

mbei

025024

2005 CT4-7 XL COMBINATION SPANNER SETin 4/4 CT tool module


› Extra long

Contents 0 Code No.

3 7 XL 10 11 12 13 14 15 16 17 18 19

21 22 24 27 30 32 36 41

8.150 2704226 2005 CT4-7 XL

1500 CTD-20 BIT TOOL MODULE 1/4"with assortment

› Only suitable for tool trolley 2004, and workbenches 1502, 1504, 1505 and 1506 XL

› For models 2005, workster, 2430 and 1504 XL with distance module 1500 ED-70 S


Contents 0 Code No.

1 20 L 4 4,5 5 6 7 8 9 10 12 13

? 680 4 5,5 6,5 8

5 685 2,5 3 4 5 6

. 685 X 5 6 8

7 687 TX T6 T7 T8 T9 T10 T15 T20 T25

T27 T30 T40

; 690 1 2 3

< 690 PZD 1 2 3

649 673 6,3

699 620 676 639

0.700 1733419 1500 CTD-20 BIT

1500 ED-70 XL DISTANCE MODULE EMPTY



W D H 0 Code No.

625 77 40 0.854 1803069 1500 ED-70 XL

1500 ED-70 S DISTANCE MODULE 1/3 EMPTY

› For tool trolley workster and 2005,

workbench 1504 XL and tool chest 2430


W D H 0 Code No.

152 77 40 0.150 1851462 1500 ED-70 S

1500 ED-70 K DISTANCE MODULE EMPTY

› For fixing modules 1500 ES in drawers with depth 400 mm of tool trolley 2004

and workbenches 1502, 1504, 1505 and 1506 XL


W D H 0 Code No.

475 77 40 0.120 1618687 1500 ED-70 K

€327, 00 excl. VAT

€135, 90 excl. VAT

€4, 60 excl. VAT

€7, 10 excl. VAT

€3, 50 excl. VAT

3

3

MAGIC

6-120 DOUBLE OPEN ENDED SPANNER SET12 pieces

› To DIN 3110, ISO 3318, ISO 1085, ISO 10102

› Slim pattern, oval shaft

› GEDORE vanadium steel 31CrV3, chrome-plated

Contents 0 Code No.

6x7 8x9 10x11 12x13 14x15 16x17 18x19

20x22 21x23 24x27 25x28 30x32

2.350 6077890 6-120

7-020 COMBINATION SPANNER SET20 pieces

› With same size each end, ring 15° offset from shaft

Contents 0 Code No.

8 9 10 11 12 13 14 15 16 17 18 19

21 22 23 24 26 27 30 32

3.360 6093660 7-020

7 XL-012 COMBINATION SPANNER SETextra long

› With same size each end, ring 15° offset from shaft

Contents 0 Code No.

10 11 12 13 14 17 19 22 24 27 30 32 4.410 6095950 7 XL-012

60 S-JP ADJUSTABLE WRENCHopen end

› Jaw set at 15°

› Swedish pattern, roller with left-hand thread

› With scale

€65, 90 excl. VAT

€169, 00 excl. VAT

€8, 95 excl. VAT

€149, 00 excl. VAT

Size " y O 9 0 Code No. excl. VAT

6 153.0 20 0-20 0.180 2668823 60 S 6 JP 8.95

8 206.5 25 0-25 0.360 1966308 60 S 8 JP 9.95

10 254.5 30 0-30 0.500 2171015 60 S 10 JP 11.95

12 305.0 36 0-36 0.860 2668882 60 S 12 JP 17.95

from

ei

027026

666-U-20 BIT BOX WITH RATCHET 1/4"35 pieces

› Particularly thin-walled 1/4" sockets

› For mechanical and hand-operated use

› In plastic box with inspection window in a foam module

Contents 0 Code No.

Impact socket 1/4"

1 4,5 5 5,5 6 7 8 9 10 11 12 13

Bit 1/4"

5 4 5 6 8

7 TORX® T10 T15 T20 T25 T27 T30 T40

; PH1 PH2 PH3

< PZ1 PZ2 PZ3

? 4,5 5,5 6,5

Wobble extension 1/4" 50 mm

Bit adaptor 1/4" sq. dr. - 1/4" hex dr.

Adaptor 1/4" hex dr. - 1/4" sq. dr.

GEDORE Ratchet 1/4" 2093 U-20

0.570 2998211 666-U-20

This 35-piece 1/4" set is suited for all conventional screwed connections in mechanical and hand-operated use. As such, the sockets can be driven via an adapter with electric machines or directly via the 2093 U-20 ratchet. The 1/4" sockets are specially thin-walled and thus admirably suited for work in confined spaces. The tried-and-tested premium ratchet comes with the set which is delivered in a small, compact plastic cassette.

Suitable for all screw fitting instances

HIGHLIGHT

€74, 90 excl. VAT

3 3

mbei!

MAGIC

7 R-005 COMBINATION RATCHET SPANNER SET5 pieces

› Flat pattern

› High torque transfer

Contents 0 Code No.

! 7 R 8 10 13 17 19 0.932 2297434 7 R-005

7 UR-012 COMBINATION RATCHET SPANNER SET, REVERSIBLE12 pieces

› Most used sizes

› Ring 13° offset from shaft

› Reversible

› For ratchet loosening and fast tightening

› High torque transfer

› In robust sheet-metal case

› Dimensions: 320 x 210 x 55 mm

Contents 0 Code No.

! 7 UR 8 9 10 11 12 13 14 15 16 17

18 19

2.840 2297418 7 UR-012

D 20 KMU-20 SOCKET SET 1/4"37 pieces

› With forged, tempered UD profile sockets, hand-operated

› With accessories made from GEDORE vanadium steel 31CrV3

› With robust lever-change reversible ratchet with push-button release


_ 2093 U-20 3 D 20 4 5 6 7 8

9 10 11 12 13

? 680 4 5,5 6,5

5 685 3 4 5 6

. 685 X 5 6 8

7 687 TX T10 T15 T20

T25 T27 T30 T40

; 690 1 2

< 690 PZD 1 2 3

' 2090-4

7 620

- 676

699

0.712 1822373 D 20 KMU-20


€91, 90 excl. VAT

ncmbei!

nc

I

029028

D 30 TX20 U-20 SOCKET SET 3/8" + 1/4"50 pieces

› Tool set for general industrial and automotive applications

› 3/8" and 1/4" sockets for protruding and recessed TORX® screws

› With robust lever-change reversible ratchets, with push-button release


c _ 3093 U-20

b _ 2093 U-20

S 3 D 30 10 11 12 13 14 15 16 17

18 19 21 22

S 9 TX 30 E11 E12 E14

S 7 ITX 30 T45 T50

R 3 D 20 4 5 5,5 6 7 8 9 10 12 13

R 9 TX 20 E5 E6 E7 E8 E10

i 7 687 TX T10 T15 T20 T25 T27

T30 T40

S ' 3090 KR-3

S ' 3090-5

S ' 2090 KR-2

R ' 2090-6

620

673 6,3 10

- 676

699

3.2 2075695 D 30 TX20 U-20

30 GMU-10 SOCKET SET 3/8"17 pieces



› With reversible lever change ratchet


$ 3093 U-10 1 30 6 7 8 9 10 11

13 14 15 16 17 19

+ 3087

' 3090-5 -10

) 3095

2.650 6235710 30 GMU-10

3090 M EXTENSION 3/8" with magnet

› The holding magnet securely fixes the screws or nuts in the socket

› One-hand operation - using the socket the screw can be immediately screwed in

› Thanks to a spring mechanism the holding magnet is always in direct contact with the screw head.

It ensures that the screw is centrally guided

› A strong permanent magnet keeps hold of even large screws

a " a y 0 Code No.

3/8 10 65 0.065 2960060 3090 M

€269, 00 excl. VAT

€169, 00 excl. VAT

€16, 95 excl. VAT

ei

odmb!

OT

MAGIC

19 V20U-10 SOCKET SET 1/4"-1/2"50 pieces

› With extra fine toothed dial-change reversible ratchet 1/4"

› With robust lever-change reversible ratchet 1/2" with push-button release

› With forged, tempered sockets, hand-operated



d $ 1993 U-10 T

b # 2093 U-3

T 1 19 10 11 12 13 14 15 17 19 22 24 27 30

T 5 IN 19 7 8 10 12 14

T ? IS 19 8 10

T ; IKS 19 3

R 1 20 4 4,5 5 5,5 6 7 8 9 10 11 13

R 5 IN 20 3 4 5 6

R ? IS 20 4 5,5 6,5

R ; IKS 20 1 2

T ' 1990-5 -10

T ) 1995

R - 2098

R ' 2090-2 -4

R + 2087

R ) 2095

7.2 6157490 19 V20U-10

ITX 19 TX-017 SCREWDRIVER BIT SOCKET SET 1/2"17 pieces

› For protruding and recessed TORX® screws

Sockets 0 Code No.

7 ITX 19 T20 T25 T27 T30 T40 T45 T50 T55 T60

9 TX 19 E10 E11 E12 E14 E16 E18 E20 E24

2.8 6129520 ITX 19 TX-017

666-006 BIT BOX NUT SETTER6 pieces

› Magnet-equipped sockets for screwing hexagon bolts in and out without any damage

› Particularly suitable for self-tapping screws

› Contents 1 piece each:

› Sockets 1/4" machine mounting sizes 7 8 10 12 13 mm and 3/8"

0 Code No.

0,228 2993244 666-006

€349, 00 excl. VAT

€149, 00 excl. VAT

€23, 95 excl. VAT

pe rf!

ei ei

031030

32 FMU-2 SOCKET SET 3/4"16 pieces



› With fine toothed, dial change ratchet


"

3293 U-2

1 32 22 24 27

30 32

36 38 41 46 50

55 60

+

3287

'

3290-8 -16

15.8 6281150 32 FMU-2

D 21 EMU-10 SOCKET SET 1"15 pieces

› With forged, tempered UD profile sockets, hand-operated


› With reversible lever change ratchet


$ K

2193 U-10 K

3 D 21 36 41

46 50

55 60 65 70 75 80

' 2190-

8 -16

6

2187 G

5 2187 K

31.4 6181600 D 21 EMU-10

666-032-J BIT BOX INDUSTRY32 pieces

› Specially adapted for use in modern industrial undertakings

› 1/4" bit holder with quick-grip system

› Made in Germany

Contents 0 Code No.

; PH 1 (1x) PH 2 (3x) PH 3 (1x)

7 TORX® T10 (2x) T15 (2x) T20 (2x)

T25 (3x) T27 (1x) T30 (3x) T40 (2x)

5 3 (1x) 4 (2x) 5 (2x) 6 (2x)

. XZN M4 (1x) M5 (1x) M6 (1x) M8 (1x)

Adapter 1/4"-1/4"

0.246 2993228 666-032-J

666-032-A BIT BOX ALLROUND32 pieces

› For industry, the trades and the ambitious do-it-yourselvers

› 1/4" bit holder with quick-grip system

› Made in Germany

Contents 0 Code No.

? 4,5 (1x) 5,5 (2x) 6,5 (1x)

; PH 1 (2x) PH 2 (3x) PH 3 (1x)

< PZ 1 (2x) PZ 2 (4x) PZ 3 (1x)

7 TORX® T10 (1x) T15 (1x) T20 (2x)

T25 (3x) T30 (2x) T40 (1x)

5 3 (1x) 4 (1x) 5 (1x)

Adapter 1/4"-1/4"

0.246 2993236 666-032-A

€359, 00 excl. VAT€739, 00 excl. VAT


I

MAGIC

DT 2142-008 HEXAGON ALLEN KEY SET8 pieces


› With 2 hexagons, same size each end

› Long blade with ball end

Contents 0 Code No.

k DT 2142 2 2,5 3 4 5 6 8 10 0.970 3037371 DT 2142-008

NEW

The 8-piece GEDORE cranked screwdriver has the new T handles in a 2-component design and with optimized ergonomics for a better transfer of force. The DT 2142 type has a double blade with the longer one having a ball end for those hard to-get-to places. Thanks to the longer lever arm a higher torque is transferred by the short blade - ideal for unscrewing stiff screws.The blades are made of GEDORE vanadium steel 61CrSiV5. The set includes the 8 most popular cranked 2 to 10 mm screwdrivers and is a MUST-HAVE for each and every workshop.

Ergonomic, versatile and resilient

1990 M EXTENSION 1/2" with magnet

› The holding magnet securely fixes the screws or nuts in the socket

› One-hand operation - using the socket the screw can be immediately screwed in

› Thanks to a spring mechanism the holding magnet is always in direct contact with the screw head.

It ensures that the screw is centrally guided

› A strong permanent magnet keeps hold of even large screws

a " y 0 Code No.

1/2 81,5 0,110 2697920 1990 M

HIGHLIGHT

€47, 80 excl. VAT

€18, 95 excl. VAT

033032

2142 TX-007 SCREWDRIVER SET TORX®7 pieces

Contents 0 Code No.

7 2142 TX T10 T15 T20 T25 T27 T30 T40 0.670 3037401 2142 TX-007

2142 T-008 HEXAGON ALLEN KEY SET8 pieces


Contents 0 Code No.

k 2142 T 2 2,5 3 4 5 6 8 10 0.970 3037428 2142 T-008

DT 2143 KTX-007 HEXAGON ALLEN KEY SET TORX®7 pieces

› For recessed TORX® head screws

› With ball end, working angle approx. 25°

Contents 0 Code No.

7 DT 2143 KTX T10 T15 T20 T25 T27 T30 T40 0.810 3037398 DT 2143 KTX-007

NEW

NEW

NEW

HIGHLIGHT

€36, 90 excl. VAT

HIGHLIGHT

€45, 90 excl. VAT

HIGHLIGHT

€74, 90 excl. VAT

+ 600 mm

+ 600 mm

MAGIC

3549 UK - 3550 UK TORQUE WRENCH TORCOFLEX UK

› Adjustable, releasing and sturdy tubular torque wrench with integrated lever ratchet

and with square drive for industry and the trades

› Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate.

Working accuracy: +/- 3 % tolerance of scale set torque.

› For controlled directional tightening

8568-01 DRL TORQUE WRENCH DREMOMETER155-760 N·m / 115-560 lbf·ft

› 3/4" double square drive for controlled bi-directional tightening

› Dual scale with a scale graduation of 10 N·m and 10 lbf·ft

› With test certificate acc. to DIN EN ISO 6789

Type a " a y Tube 9 0 Code No.

t DRL 3/4 20 800-1400 8571-80 10 N·m / 10 lbf·ft 5.0 7670500 8568-01

8581-01 EK TORQUE WRENCH DREMOMETER600-1500 N·m

› Working accuracy: +/- 3% tolerance of scale set torque

› Full-metal construction from high-strength aluminium alloy

› With 1" single square drive for directional tightening

› With test certificate acc. to DIN EN ISO 6789

Type a " a y 9 0 Code No.

s EK 1 25 932 25 N·m 10.8 2311267 8581-01

€109, 00 excl. VAT

€739, 00 excl. VAT

€999, 00 excl. VAT

from

N·m a " a y 9 r 4 0 Code No. excl. VAT

1-5 1/4 6.3 225.0 0,25 N·m 25.0 15 0.320 2958007 3549-00 UK 119.00

5-25 1/4 6.3 285.5 1 N·m 25.0 15 0.410 2958015 3549-02 UK 119.00

10-50 3/8 10.0 348.5 2,5 N·m 35.0 18 0.820 2958023 3549-05 UK 115.00

20-100 1/2 12.5 408.8 5 N·m 42.5 22 1.380 2958031 3550-10 UK 109.00

40-200 1/2 12.5 499.0 10 N·m 42.5 22 1.520 2958058 3550-20 UK 109.00

60-300 1/2 12.5 590.8 10 N·m 42.5 22 1.360 2958066 3550-30 UK 139.00

80-400 3/4 20.0 737.5 10 N·m 68.0 36 3.440 2958074 3550-40 UK 286.00

110-550 3/4 20.0 998.0 10 N·m 68.0 36 3.700 2958082 3550-55 UK 339.00

035034

754-04 RATCHET HEAD DREMOMETER

› For controlled clockwise tightening

Q " a " H , A° Use 0 Code No.

3/4 3/4 56 65 10 CD, DS, D, DR, DX 1.0 7680730 754-04

DVI-20L TORQUE MULTIPLIER DREMOPLUS ALU

› Mechanical hand torque multiplier for controlled screw tightening

and unloosening screw connections

› With a single-stage planet gear

› High-performance aluminium housing

› Multiplication at the ratio of 1:4

› Guaranteed accuracy: Better than +/- 3 % tolerance

› With L-form straight reaction arm,

with adjustable reaction square, of lightweight metal

< max. N·m-Output

< max.lbf·ft-Output

g Q " C a " D Cmin

Cmax

; max. N·m-Input$

; max. lbf·ft-Input$

0 Code No.

2000 1500 1:4 3/4 1 73 152 580 430 3.0 2653249 DVI-20L

DVI-28Z TORQUE MULTIPLIER DREMOPLUS ALU

› Mechanical hand torque multiplier for controlled screw tightening

and unloosening screw connections

› With a single-stage planet gear

› High-performance aluminium housing

› Multiplication at the ratio of 1:5.5

› Guaranteed accuracy: Better than +/- 3 % tolerance

› With Z-form, offset reaction arm of chrome-vanadium steel

< max. N·m-Output

< max.lbf·ft-Output

g Q " C a " D Cmin

Cmax

; max. N·m-Input$

; max. lbf·ft-Input$

0 Code No.

2800 2050 1:5,5 3/4 1 100 150 550 410 3.9 2653273 DVI-28Z

€99, 00 excl. VAT

€1259, 00 excl. VAT

€1099, 00 excl. VAT

MAGIC

8612-050 ELECTRONIC TORQUE TESTER DREMOTEST E0.9-55 N·m / 0.7-40.6 lbf·ft

› For vertictal testing and verifying clockwise torque wrenches in the range of 0.9-55 N·m

› With fixed hexagon female drive, 10 mm

› With 1/4" and 3/8" square drive adaptors, 10 mm

› Auto reset, can be switched from N·m to lbf·ft

› Serial interface RS232

N·m lbf·ft - Resolution Adaptor Q 0 Code No.

0,9-55 0,7-40,6 10.0 0,01 1/4", 3/8" 3.0 1947699 8612-050

H 42 KEL-88 HEXAGON ALLEN KEY SETfor in-hex screws,

extra long, with ball end

› In blue plastic holder (LPDE)

› GEDORE vanadium steel 59CrV4, chromated

Contents 0 Code No.

$ 42 KEL 2 2,5 3 4 5 6 8 10 0.415 1523988 H 42 KEL-88

H 42 DKEL-88 HEXAGON ALLEN KEY SETfor in-hex screws,

extra long, with double ball end

› Particularly suitable for confined spaces in view of a double ball end and short angled side

› GEDORE vanadium steel 59CrV4, zinc-plated

Contents 0 Code No.

$ 42 DKEL 2 2,5 3 4 5 6 8 10 0.400 2797186 H 42 DKEL-88

GEDORE DREMOTEST E is eminently suitable for rapid verification and/or setting/calibration of all clockwise torque wrenches in the 0.9 to 55 N·m range. If required, a switch-over can be made between N·m and lbf·ft - this is done electronically. The device can be immediately used (plug & work) once connected to a power socket. In view of its high measuring accuracy of a +/- 1% tolerance with all readings (+/- 1 digit), the tester provides a maximum degree of reliability. The sturdy tester has a clear LCD display and a fixed 10 mm size hexagon mounting.

The user-friendly tester for each and every torque wrench

HIGHLIGHT

€629, 00 excl. VAT


R P

P T

T T

037036

8245 JC COMBINATION PLIERSEuro pattern

› Universal model with slimline head,

ideal for confined spaces

8316 JC POWER SIDE CUTTER

› Good lever action for easy cutting

› For hard wire/piano wire

8314 JC SIDE CUTTERSwedish pattern

› With slender head - ideal for confined spaces

› For medium-hard wire

› max. cutting capacity 1.6 Ø mm

8132 JC TELEPHONE PLIERSwith wire cutter, serrated,

straight pattern

› Long, flat-round jaws, straight gripping faces, serrated

› For holding, gripping, bending and cutting

L L3

W3

W4

T1

T2

0 Code No.

200 75.7 18.5 3.7 9.5 2.8 0.225 6719670 8132-200 JC

8132 AB JC BENT NOSE TELEPHONE PLIERS with wire cutter,

serrated, angled pattern

› Flat-round jaws, angled gripping faces, serrated

› 45° angled tips make gripping round the corner possible

L L3

W3

W4

T1

T2

0 Code No.

200 70.5 18.5 3.7 9.5 2.8 0.225 6721300 8132 AB-200 JC

8133-200 JC MULTIPLE PLIERS

› 5in1: Holding, cutting, insulation-stripping, crimping, squeezing

y 0 Code No.

200 0.200 2676079 8133-200 JC

€12, 95 excl. VAT

€19, 95 excl. VAT



L L3

W3

W4

T1

0 Code No. excl. VAT

180 38 27.0 6.4 9.8 0.280 6733150 8245-180 JC 12.95

200 42 29.5 7.4 10.5 0.363 6733230 8245-200 JC 14.95

L L3

W3

T1

Ø 0 Code No. excl. VAT

180 22.6 26.0 11.0 1,8 0.265 1439588 8316-180 JC 19.95

200 22.0 28.0 11.0 2,0 0.340 6745080 8316-200 JC 21.95

L L3

W3

T1

Ø 0 Code No. excl. VAT

160 19.0 22.0 10.0 1,6 0.230 6743380 8314-160 JC 14.95

185 25.0 26.0 11.0 1,6-2,0 0.300 2910934 8314-180 JC 16.95

from

fromfrom

BA M N

1.

2.

MAGIC

8340-200 JL BOLT CUTTER

› Compact power bolt cutter with a particularly effective cutting performance

› Optimum lever action requires less effort

› Wear-free rotating/thrust block bolt to reduce sliding friction when cutting

› Cutting edges additionally inductively hardened (63 - 65 HRC)

› The gliding ahead of the cutting material is prevented by two one-sided

micro-grooves and thus is always stays in optimal cutting position

› Precision cutting edges for soft wire up to Ø 6.0 mm, hard and piano

wire up to Ø 3.8 mm

y 0 Code No.

200 0.389 2541300 8340-200 JL

8340 Z-200 JL BOLT CUTTER › Compact power bolt cutter with a particularly effective cutting performance

› Optimum lever action requires less effort

› Wear-free rotating/thrust block bolt to reduce sliding friction when cutting

› Double-sided recess cutting with extra cutting edge, near the joint,

ensures optimum lever conditions for large wire diameters

› The extra cutting edge serves as first cut for thick bolts and engraves

them deeply

› In the second step, the main cutting edge cuts through the bolt completely

› Precision cutting edges for soft wire up to Ø 6.0 mm,

hard wire up to Ø 5.5 mm and piano wire up to Ø 3.8 mm

y 0 Code No.

200 0.389 2666324 8340 Z-200 JL

137 GRIP WRENCH

› With adjusting screw and release lever

› Special jaw shape for secure gripping, clamping and holding

8092 CABLE SHEARS

› Max. cutting capacity Ø 10 mm2

› For cutting multi-core copper and aluminium cables

up to Ø 10 mm

mm2 Ø y z 0 Code No.

10/50 10 160 6.1/2 0.180 2878356 8092-160 TL

S 8000 E SET OF CIRCLIP PLIERS4 pieces

› Most popular sizes, packed

› Pressed-in tips of highly wear-resistant

roller bearing steel

› Twisting-impeding tip geometry

› For internal and external circlip rings

› With straight and 90° angled tips

Contents 0 Code No.

8000 AE 2, 8000 AE 21, 8000 JE 2, 8000 JE 21 0.680 2931877 S 8000 E


€15, 30 excl. VAT

€13, 95 excl. VAT €40, 90 excl. VAT

from

y z O _ 0 Code No. excl. VAT

185 7 25 1 0.288 6406620 137 7 15.30

230 10 32 1.1/4 0.526 6406700 137 10 17.40

300 12 45 1.3/4 1.042 6406890 137 12 33.90

039038

8320 JC WIRE ROPE CUTTER

› Extremely high durability compared to traditional wire rope cutters

› Wire ropes up to 1800 N/mm2 with max. 6 mm Ø

› (e.g. stainless steel wire ropes, wire ropes with steel and textile cores, Bowden cables, shears)

› Wire up to 750 N/mm2 with max. 4 mm Ø

› (e.g. nails/wire nails, screws, bolts, ceiling banners)

› Single- and multi-core copper and aluminium cables with max. 6 mm Ø

› Two integrated press profiles for Bowden cable terminal sleeves and cable end sleeves

› Adjustable joint for precise cutting plate guidance

› Latch to prevent unwanted opening

› Easy-to-change cutting plates

y 0 Code No.

200 0.480 2788799 8320-200 JC

142 TL UNIVERSAL PLIERS

› Opening width adjustable with 15/17

settings using a push-button

› Single-hand adjustment - secure locking -

no unintentional readjustment

100 1.1/2 ELBOW PIPE WRENCH ECK-SCHWEDE-SNAP® - THE SWEDISH

› Heavy-duty pipe wrench with three-point grip

› Teeth offset against direction of rotation

and induction-hardened

› Adjuster screw cannot be lost

Size O L 0 Code No.

1.1/2 60 420 1.400 4500220 100 1.1/2

The cutting edges of conventional wire rope cutters become blunt over time making a new wire rope cutter necessary. Responding to this, GEDORE has developed the patented 8320 JC wire rope cutter with replaceable cutting plates. The cutting plates are of powder metallurgical high-speed steel (HSS) and have a much longer service life over traditional wire rope cutters. The arched cutting edges ensure an extremely gentle shearing cut. This reliably stops any fanning out of the wire rope. The optimum cutting edge geometry results in both a minimum of effort and high cutting performances - i.e. wire ropes up to 1800 N/mm2 of a maximum 4 mm diameter, wires up to 750 N/mm2 of a maximum 6 mm diameter and a single or multi-core copper and aluminium cable of a maximum 6 mm diameter. The cutter has two integrated press profiles for Bowden cable terminal sleeves and cable end sleeves. Moreover, the screwed joint is re-adjustable and so ensures precision cutting plate guidance. In addition, the "Lock" wheel stops the cutter from being unintentionally taken out of its locked state.

GEDORE wire rope cutters: extremely resilient

HIGHLIGHT

€69, 90 excl. VAT

€17, 95 excl. VAT

€49, 90 excl. VAT

from

Execution L" 0 Code No. excl. VAT

17 settings 7 0.183 2668211 142 7 TL 17.95

15 settings 10 0.371 6416180 142 10 TL 18.95

17 settings 12 0.550 1995413 142 12 TL 29.90

MAGIC

1102-007 PLIERS SET3 pieces


› In GEDORE L-BOXX® Mini, incl. divider set

› Ideal for keeping small parts and accessories

Contents 0 Code No.

8132-200 JC, 8314-180 JC, 142 10 TL 1.201 2951789 1102-007





Contents 0 Code No.

8316-160 JC, 8133-200 JC, 142 7 TL 0.977 2951797 1102-008





Contents 0 Code No.

8132-160 JC, 8250-180 JC, 8316-160 JC 0.940 1692305 1102-003

600 H ENGINEERS' HAMMER ROTBAND-PLUS

› Forged hammer head DIN 1041 made from special steel

› Contoured hickory handle DIN 5111

› With a long hardened handle protective steel sleeve and fixing plate

› ROTBAND-PLUS steel fixing, high safety, long service life

142-430 ALUMINIUM PRYBAR

› Forged of high-class aluminium

› Extremely light and very robust

› For universal use - with pry and tip

y K 0 Code No.

430 26 0.405 1859188 142-430


€49, 90 excl. VAT

€12, 95 excl. VAT

€20, 95 excl. VAT

g Z y 0 Code No. excl. VAT

200 280 0.325 8582930 600 H-200 12.95

300 300 0.502 8583070 600 H-300 13.45

500 320 0.727 8583230 600 H-500 14.95

800 350 1.135 8583580 600 H-800 18.40

1000 360 1.326 8583660 600 H-1000 22.50

from

8551 TG-1 8551 TG-2 8551 TG-3

041040

8551 S-005 BOLT EXTRACTOR SET5 pieces

Contents + 0 Code No.

8551 S 1 2 3 4 5 M3-M18 0.125 2659336 8551 S-005

8551 TG TAP WRENCH WITH RATCHET

› To operate bolt extractors in confined spaces

› Reversible for clockwise or counterclockwise operation

› Sliding T-handle

› With two-jaw chuck to hold square shanks

140 THREAD FILE

› For repairing damaged internal and external threads

for thread pitches y 0 Code No.

0.80 1.00 1.25 1.50 1.75 2.00

2.50 3.00 mm

230 0.125 6409640 140

711 DIGITAL MEASURING CALLIPER

› Stainless steel, hardened

› Switchable from mm to inch

y O _ 0 Code No.

230 153 6 0.408 6550070 711

4529 MULTI-USE CABLE KNIFE

› For stripping round cables, 4 - 28 mm

› Integrated stripping function for flexible

and single-strand conductors

› No need to put down the knife

when the blade is automatically switched

from all-round to elongated cut

C 0 Code No.

145 0.150 2955393 4529

€14, 95 excl. VAT

€8, 95 excl. VAT

€39, 90 excl. VAT


O + y 0 Code No. excl. VAT

2,0-5,0 M3-M8 85 0.186 2659433 8551 TG-1 8.95

4,6-8,0 M5-M12 110 0.315 2659441 8551 TG-2 12.95

9,0-12,5 M13-M20 117 1.040 2659468 8551 TG-3 64.90

from

P iO ö 1000 V

T iO ö 1000 V

iO ö 1000 V

iO ö 1000 V iO ö 1000 V

MAGIC

VDE 8314-180 H VDE SIDE CUTTERwith VDE insulating sleeves

› For medium-hard wire, 1.6 mm

L L3

W3

T1

Ø 0 Code No.

185 25 26 11 1,6-2,0 0.297 2910950 VDE 8314-180 H

VDE 8131 AB VDE MULTIPLE PLIERSwith VDE insulating sleeves, angled pattern

› Cable cutter: enables easy cutting of cables up to 5x2.5 mm2 resp. Ø 12 mm

› Stripping blades: stripping possibility for wires 1,5 mm2 and 2,5 mm2

› Crimp profile: crimping of conductor end-sleeves

› Toothed gripping face: special holding capacity when pulling cables and wires during installations

› Angled plier tip: guarantees gentle work for wrists and gives sight on to the workpiece

y 0 Code No.

200 0.217 2910845 VDE 8131 AB-200 H

VDE 8250-180 H VDE HEAVY DUTY COMBINATION PLIERSwith VDE insulating sleeves

› For heavy continuous use

› Good lever action for easy cutting

› To cut all wire types including piano wire, 1.6 mm

L L3

W3

W4

T1

0 Code No.

180 38.5 25.6 6.5 11.0 0.288 1550950 VDE 8250-180 H

VDE 8098 H VDE STRIPPING PLIERS with VDE

insulating sleeves

› Opening stop, spring and brass adjusting screw

for wires 0.8 - 6.0 mm2

L L3

W3

T1

mm2 0 Code No.

160 43.5 18.5 8.5 0,8-6 0.204 1552074 VDE 8098-160 H

VDE 146 VDE UNIVERSAL PLIERS7 settings

› With safety box joint and finger protection

› Automatic clamping with offset gripping surfaces

y O 0 Code No.

250 31 0.485 6120140 VDE 146 10

€19, 95 excl. VAT

€25, 95 excl. VAT

€17, 95 excl. VAT


iO ö 1000 V

iO ö 1000 V

iO ö 1000 V

winner

winner

winner

043042

8158 CRIMP WRENCHfor conductor end-sleeves

› Automatic cross-section adjustment from 0.08 to 16.0 mm2 / AWG 28 - 5 without adjustment

mm2 AWG L 0 Code No.

0,08-16 28-5 250 0.500 2956268 8158

VDE 2162-2172 PM-06 VDE SCREWDRIVER SET SLIM DRIVE6 pieces

› For slotted and cross-head screws PH as well as Plus-Minus screws

› No problems in reaching screws deeply embedded in screw shafts

Contents 0 Code No.

? VDE 2172 3,5 4 5,5

; VDE 2162 PH 1 2

VDE 2164 SL/PH 2

0.590 2928701 VDE 2162-2172

PM-06

VDE 2162-2172 PZ-06 VDE SCREWDRIVER SET SLIM DRIVE6 pieces

› For slotted and cross-head screws PZ


Contents 0 Code No.

? VDE 2172 3,5 4 5,5 6,5

< VDE 2162 PZ 1 2

0.590 2928728 VDE 2162-2172

PZ-06

VDE 2162-2172 PH-02 VDE SCREWDRIVER SET SLIM DRIVE2 pieces



Contents 0 Code No.

? VDE 2172 3,5

; VDE 2162 PH 2

0.195 2928736 VDE 2162-2172 PH-02

€119, 00 excl. VAT

€29, 90 excl. VAT

€29, 90 excl. VAT

€11, 95 excl. VAT

nc iO ö 1000 V

MAGIC

1100-1094 VDE TOOL ASSORTMENT HYBRID53 pieces

› The perfect range of tools for repairs and maintenance of hybrid and electric vehicles

› For vehicles of all the manufacturers

› All tools insulated on the basis of EN 60900/EC 60900

› GEDORE L-BOXX® 136 compatible with the Sortimo® vehicle interior fittings in your service mobile

Contents 0 Code No.

æg VDE 30 6 8 9 10 11 12

13 14 15 16 17 18 19 20 22

æf VDE INX 30 8 10 12

º VDE 3090-3 -6

º VDE 3093 U

? VDE 2170 2,5 3,5 4 5,5

; VDE 2160 PH 1 2 3

7 VDE 2163 TX T20 T25 T30

VDE 8094

VDE 146 10

VDE 8250-200 H

VDE 8314-180 H

VDE 8132 AB-200 H

VDE 8120-160 H

VDE 4522

V 914 1 2 3

6.8 2979063 1100-1094

226100 SHEARS SETfor plastic pipes

› To cleanly cut hard and soft plastic pipes, rubber hoses

› Contains form blocks for 16, 19 and 25 mm pipes,

1 prism for profiles and 1 angle stop adjustable up to 45°

0 Code No.

1.050 1637983 226100

1100-2788 MANUAL BENDING TOOL SETin L-BOXX® 136

› Sizes from 3 to 10 mm up to 180°

› For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391)

with 0.75 - 2.0 mm wall thicknesses, composite pipes up to 16 mm as well as bendable

stainless steel pipes with 1.0 - 1.5 mm wall thicknesses

› With 10 aluminium bending formers for pipes with Ø 3-4, 5, 6, 8, 10, 12, 14, 15, 16 and 18 mm

› For clamping in a vice

› Can be used as bending pliers up to size 10 mm

› As from sizes 12 mm also for stationary use with tripod no. 268500

› With pipe cutter no. 2180 3

0 Code No.

8.7 2963515 1100-278801

€519, 00 excl. VAT

€32, 90 excl. VAT

€659, 00 excl. VAT

045044

1.31/0 INTERNAL EXTRACTOR SET

› Set comprises the most used extractor sizes

for the removal of ball bearings, bearing races,

bushings, shaft seals, etc.

Contents 0 Code No.

1.30/2 1.30/3 1.30/4 1.30/4A 1.36/1 2.550 8014530 1.31/0

1.32/1 SET OF INTERNAL AND EXTERNAL EXTRACTORS

› Set of internal extractors, support braces,

pulling chucks, external extractors

and stud extractors

Contents 0 Code No.

1.30/2 1.30/3 1.30/4 1.30/4A 1.30/5 1.30/6

1.36/1 1.36/2 1.19/0XS 1.12/02 1.06/1

10.4 8015260 1.32/1

1.07/E QUICK-RELEASE PULLER3-arm pattern

› Fast and uncomplicated setting-up

and readjustment due to quick-release legs

1.06/AS PULLER SETwith 6 legs

› 2-arm puller, with 6 slim legs in 3 lengths

› Particularly suitable for barely accessible places

a b max. t A $ optional

d

c d e f 0 Code No.

260 150 / 220 / 300 5.0 G 1/2 x 210 22 1.06/HSP1 40.0 7.0 5.0 15.0 8.1 1675974 1.06/AS-2

€179, 00 excl. VAT€479, 00 excl. VAT

€269, 00 excl. VAT

€69, 00 excl. VATfrom

a1

a2 min

a2 max

b max. t A $ optional

d

c d e 0 Code No. excl. VAT

90 70 140 100 3.0 M 14x1,5 x 140 17 – 22 12 3.0 1.4 1222902 1.07/1-E 69.00

160 100 220 150 5.0 G 1/2 x 210 22 1.06/HSP1 30 18 3.5 3.8 1227335 1.07/2-E 129.00

250 100 400 200 7.5 G 3/4 x 280 27 1.06/HSP2 36 28 6.5 9.2 1554751 1.07/3-E 229.00

MAGIC

1.07/K-SE S PULLER SETwith 6 legs

› Plastic case containing: 1 cross-beam each 2- and 3-arm pattern (clamping reach 90 mm),

1 spindle, and 6 slim quick-release pulling legs (clamping depth 100 / 200 mm)

a b A $ c d 0 Code No.

90 100 / 200 M 14x1,5 x 140 17 27 7.5 4.2 1745158 1.07/K-1-SE 200 S

1.06/ST-E PULLER SETwith stand

› Consisting of 5 pullers each in different sizes with standard or quick-release pulling legs

› Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force,

even when extremely high pulling forces are required

› For clamping depths up to Ø 250 mm external, Ø 330 mm internal, and clamping reach up to 200 mm

B 0 Code No.

1.06/1-E 1.06/1A-E 1.06/2-E 1.06/2A-E 1.06/3-E 19.2 1322745 1.06/ST-E

The GEDORE 1.07/K puller set includes both a two and three-arm cross-beam of a 90 mm clamping reach and, in each instance, three thin quick-grip pulling legs of the 100 and 200 mm clamping depths as well as two spindles. The set is for universal use since a puller can, if necessary, be assembled. The thin legs are suitable for where access is particularly difficult. The quick gripping is for ease and rapidity in setting the legs. The set is supplied clearly arranged in the plastic case with Check-Tool insert.

GEDORE 1.07 puller: for universal use

HIGHLIGHT

€229, 00 excl. VAT

€449, 00 excl. VAT

047046

1.55 HYDRAULIC PRESS

› This piece of auxiliary equipment considerably

increases the capability of the standard

pressure spindle

max. t Stroke height Installation height 0 Code No.

8 10 75 1.0 8024090 1.55/1

1.41/0 SEPARATOR AND PULLER SET

› Set comprising separator, puller,

and extension rods

a b 0 Code No.

5-60 225 2.8 8109750 1.41/0

1.35/1A SLIDING HAMMER

› Suited for the removal of small ball bearings

since there is often not enough room for counter-support braces

for internal extractors p with adaptor $ y Sliding surface Impact weight in g 0 Code No.

1.30/0 - 1.30/7 M10 M 14x1,5 13 270 200 700 1.0 1958070 1.35/1A

1.73 UNIVERSAL BALL JOINT PUL-LER

› For removing ball joints on cars and trucks

O Clamping height Fork depth 0 Code No.

32 85 28 2.520 8033240 1.73/3

1.72 BALL JOINT PULLER

› For the simple and damage-free removal of ball pins on track rods and push rods

€89, 00 excl. VAT

€119, 00 excl. VAT

€49, 00 excl. VAT

€89, 00 excl. VAT

€23, 95 excl. VATfrom

a b c A $ 0 Code No. excl. VAT

18 35 40 M 14x1,5 x 50 17 0.300 8030300 1.72/1 23.95

23 45 50 M 14x1,5 x 50 17 0.400 8030490 1.72/2 32.90

27 56 60 M 18x1,5 x 80 19 0.700 8030570 1.72/3 41.90

OT

MAGIC

1.91 TYRE REMOVING TOOL

› For breaking the adhesion between truck tyres and wheel rims

y 0 Code No.

300 2.0 8032270 1.91

1.76/1 CARTRIDGE SPANNER3-arm pattern

› Especially suitable for removing firmly seated granulate cartridges of compressed air

dryers on HGV, with right-handed or left-handed thread

› Great clamping reach (from 95 to 165 mm)

› Drive 1/2"

O Q " Q 0 Code No.

95-165 1/2 12.5 1.420 1523651 1.76/1

1.34/10 INTERNAL EXTRACTOR SET5 pieces

› Multiple wrench size (11+ 13 mm)

› M10 connecting thread

› In practical plastic case

1 internal extractor 5-8.5 mm, no. 1.34/1

1 internal extractor 8-15 mm, no. 1.34/2



1 sliding hammer, no. 1.35/0

0 Code No.

1.3 1638629 1.34/10

1.26/K NUT SPLITTER SET

› For nuts from size 10 mm (M6)

to size 36 mm (M24), including spare chisel

› With chisel stopper

Contents 0 Code No.

1 nut splitter 10-17 mm, M6-M10, No. 1.26/1



2 spare chisels for 1.26/1 + 1.26/2, No. 1.26/M1

1 spare chisel for 1.26/3, No. 1.26/M3

2.5 2017008 1.26/K-3

1.28 STUD EXTRACTOR

› For removing damaged studs with right-handed or left-handed thread

› Even suitable for extremely short stud ends

€32, 90 excl. VAT

€39, 90 excl. VAT

€239, 00 excl. VAT

€189, 00 excl. VAT

€28, 90 excl. VAT

Ø-Stud $ 0 Code No. excl. VAT

6-13 19 0.230 8010620 1.28/1 28.90

8-19 19 0.300 8010700 1.28/2 32.90

from

049048

1.04/ST-HP-B PULLER SET with stand

B 0 Code No.

1.04/HP1A-B

1.04/HP2A-B

1.04/HP3A-B

15.2 2300044 1.04/ST-HP-B

No. Code a1

a2 min

a2 max

b max. t A $ optional d c d e 9

1.04/HP1A-B 1981145 130 70 170 100 5.0 M 14x1,5 x 140 17 – 22 15 3.0 x

1.04/HP2A-B 1981153 200 110 260 150 10.0 G 1/2 x 210 22 1.06/HSP1 30 24 3.5 x

1.04/HP3A-B 1981161 350 150 420 200 15.0 G 3/4 x 280 27 1.06/HSP2 36 32 5.0 x

1.07/K-2 PULLER SETwith 9 legs

› In plastic case, insert with nubs on both sides

› Contents: 1 spindle, 1 cross-beam each 2- and 3-arm pattern and 9 slim pulling legs in 3 lengths

› Second spindle in the set 1.07/K safes working time

a b max. t A $ optional

d

c d e 0 Code No.

200 150 / 220 / 300 5.0 G 1/2 x 210 22 1.06/HSP1 40 7.0 5.0 13.5 1676008 1.07/K-2

› Cross-beam especially hardened and tempered allows safe application of extremely high

pulling forces and doubles the tensile force capability

› Strong drop forged pattern

› Rigid legs forged ab one piece

› Leg brake - prevents unintentional leg slipping. The leg can be slid along the cross-beam

at the push of a button

› Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised

application of force, even when extremely high pulling forces are required

Contents

Specifications

1.62 WHEEL-HUB PULLERfor trucks

› For wheel stud circles from 150 up to 350 mm

› With wheel stud protection using rotating nut apertures that always lie flat to the hub

for Ø 22 mm and suitable reduction bushing Ø 14 and 18 mm

› This tool may also be used with the hydraulic aid without requiring a reduction bushing

No. of legs A $ optional d 0 Code No.

8 G 1 x 310 36 1.06/HSP3 12.6 8026030 1.62/8

€429, 00 excl. VAT

€499, 00 excl. VAT

€289, 00 excl. VAT

MAGIC

1101-1.29/3K BALL BEARING EXTRACTOR SET in i-BOXX® 72

› Ball bearing extractor set for more than 40 ball bearings

› For removing ball bearings that are both on a shaft and in a housing

› Non-destructive removal of deep-groove ball bearings without dismantling the shaft;

no necessity to drill open the bearing cage (no chippings)

› With Check-Tool insert for quick check of completeness

› Insert for use in drawers with min. dimensions 340 x 260 x 60 mm

› In GEDORE i-BOXX® 72 No. 1101 L

for ball bearing No. 0 Code No.

6000 6001 6002 6003 6004

6005 6006 6007 6008 6009

6010 6011 6012 6200 6201

6202 6203 6204 6205 6206

6207 6208 6209 6210 6211

6212 6213 6300 6301 6302

6303 6304 6305 6306 6307

6308 6309 6310 6311 6403

6404 6405 6406 6407

5.8 2964392 1101-1.29/3K

247 H COMBINATION HAMMER KOMBI-PLUS R

› Combination of engineers' and recoilless hammer

› Due to the special filling insert in the hammer head

a considerable higher striking effect is reached compared

to standard engineers' and recoilless hammers

› Reduction in expenses due to universal use as an engineers'

and recoilless hammer

› With ergonomic shaped hickory handle (E 247 H)

› With exchangeable insert in breakage and wear-resistant

modified polyamide (E 247)

› Less energy necessary, thus easier working

, y Spare handle 0 Code No.

30 305 E 247 H-30 0.460 1603299 247 H-30

248 ST RECOILLESS HAMMER

› With very robust and durable steel tube handle

› Splinter-proof, shatter-proof and wear-resistant polyamide heads

› Recoilless hammers improve effect of impact

and so protect sensitive surfaces

› "Dead blows" with no recoil reduces stress on muscles,

nerves and wrists

104 HS SPLITTING CHISEL flat

› Forged

L a b h 0 Code No.

240 26 26 7 0.400 8723930 104 HS

The GEDORE ball bearing extractor set is for non-destructive extraction of over 40 different ball bearings fitted on a shaft or in a housing. Practically every specific application can be solved thanks to four heads with spindle, seven sets of legs and a plug-in handle. This set is delivered in the compact plastic GEDORE i-BOXX® with inspection window and Check-Tool insert for an easy completeness check.

GEDORE ball bearing extractor set: deployable on more than 40 ball bearings

HIGHLIGHT

€529, 00 excl. VAT

€26, 90 excl. VAT

€9, 95 excl. VAT

€24, 95 excl. VAT

, y 0 Code No. excl. VAT

40 300 0.800 8829170 248 ST-40 26.90

50 310 1.005 8829250 248 ST-50 32.90

from

051050

116 D PIN PUNCH SET6 pieces

› Chrome-molybdenum-vanadium air hardening steel 45CrMoV7

› Carefully hardened and tempered along the full length

› Striking heads inductively tempered

› Working edge polished and clear varnished

Contents 0 Code No.

119-3 -4 -5 -6 -7 -8 0.820 8758050 116 D

905 CREEPER

› Resistant to oil, grease and brake fluid

› Carrying capacity: 130 kg

L W H 0 Code No.

1030 480 115 5.0 1823698 905

122012 CHAIN PIPE WRENCHAmerican pattern

› High efficiency due to maximum-possible lever action

› With hardened exchangeable jaws, toothed on both sides

Size , z y 0 Code No.

2-12 60-324 63 1600 22.1 4548420 122012

38 TYRE LEVER

› Profiled pattern, forged from solid stock

› With protective surfaces for light-alloy wheels

y z 0 Code No.

500 20 0.602 6332830 38 20

39 TYRE LEVERheavy-duty pattern

y z 0 Code No.

610 24 1.365 6333050 39

906 KNEELING BOARD

› Made from solid foam

L W H 0 Code No.

450 210 30 0.110 1942948 906

€26, 90 excl. VAT

€56, 90 excl. VAT

€559, 00 excl. VAT


€9, 95 excl. VAT

MAGIC

133 K GASKET SCRAPER

› With plastic handle

z y K 0 Code No.

10 240 22.5 0.154 6535190 133 K

643 BRAKE CALIPER BRUSH

y Bristle length 0 Code No.

225 21 0.094 6531440 643

36 1-140 STRAP WRENCH

› With strong, non-slip fabric strap, extra wide = 25 mm

, [ y W 0 Code No.

140 5.1/2 220 25 0.278 6327320 36 1-140

36 2-200 STRAP WRENCH

› With strong, non-slip fabric strap, extra wide = 25 mm

, [ y W 0 Code No.

200 8 285 25 0.578 6327400 36 2-200

403 HACKSAW

› Adjustable tubular steel frame

› For 10" and 12" hacksaw blades, complete with No. 403 A-405 A

y z 0 Code No.

410 18.1/2 0.411 6500210 403


HIGHLIGHT

€19, 95 excl. VAT

€16, 95 excl. VAT

HIGHLIGHT

€36, 90 excl. VAT

I

600

mm

OT

053052

642 SP MAGNETIC LIFTERwith lamp, mirror and clip

› For searching and lifting small metal parts in confined areas

› If necessary, the magnet can be removed

› Mirror diameter 30 mm

y magnet Ø J 0 Code No.

500 12 350 0.172 6536750 642 SP

641 CLAW GRIPPER

› With flexible shaft for grasping small parts

› Also suitable for inserting split pins, dowels, etc. in confined areas

› Max. gripping capacity 14 mm

y Ø 0 Code No.

540 7 0.103 6531520 641

121-2 SUCTION CUP LIFTERwith 2 cups

› Lifting capacity 60 kg

Ø 0 Code No.

120 0.580 2979276 121-2

1993 GU-10 XL SWIVEL HEAD REVERSIBLE RATCHET 1/2"extra long

› Swivels through 180°

› With lever change

› Push-button release

› Max. torque 600 N·m

› Locks in the middle position:

When the lever is flipped, it automatically engages

for clockwise or counterclockwise operation

› For hand-operated sockets and accessories

with square drive as per DIN 3120 - C 12.5,

ISO 1174, ball locking device

a " a A° y 0 Code No.

1/2 12.5 7,5 600 1.160 2018934 1993 GU-10 XL

K 19 LS-004 IMPACT SOCKET SET 1/2"4 pieces

› 4 impact sockets, machine-operated,

suitable for all standard electric and air tools

› Thin-walled to protect the alloy wheels

Sockets 0 Code No.

1 K 19 LS 17 19 21 22 0,980 2790831 K 19 LS-004

€86, 90 excl. VAT

€36, 90 excl. VAT

€79, 90 excl. VAT

€69, 00 excl. VAT

€39, 90 excl. VAT

odpe

MAGIC

702 FEELER GAUGE SET, FAN PATTERN › With protective handle, folding, blade length 100 mm

› Handle nickel-plated

w 0 Code No.

5 10 15 20 25 30 35 40 45 50 55 60 65 70

75 80 85 90 95 100/100

0.100 6547870 702 20 M

1050 TOOL ASSORTMENT AUTODOCTOR29 pieces

› Breakdown assortment for cars

› Set in metric sizes

Contents 0 Code No.

7 8 10 12 13 14 17 19, 49 D, 49 R, 145 10 C, 625 M, 0513-09, 4611, 8250-180 JC, 600 H-300, 2150 4 5,5 6,5, 2160 PH 2 3.2 6604770 1050

S 1022 TOOL ASSORTMENT NFZ133 pieces

› Ideal for maintenance and service work on industrial vehicles

of all brands with metric and TORX® screws

Contents 0 Code No.

1500 ES-1993 U-20, 1500 ES-19, 1500 ES-K 19 L, 1500 ES-2150 PH, 1500 ES-145, 1500 ES-350, 1500 ES-6

6 30x32 36x41, H 42 KEL-88, 7 XL 24 27 30 32 34 36 41, 137 10, TX 19 E10 E11 E12 E14 E16 E18 E20 E24

ITX 19 T20 T25 T27 T30 T40 T45 T50 T55, 32 EMU-2, ITX 32 T60 T70 T80 T90 T100, 403, 39, 8138-200 JC

135 13 20, 646, 600 H-500 -1500, SL 1916, 1500 ED-30 [12x], 1500 E-N L [2x], 1500 E-S L

45.5 2319934 S 1022

€7, 95 excl. VAT

€149, 00 excl. VAT

€1499, 00 excl. VAT

A 2 2,5 3 4 5 6 8 10 mm

ì XL 24 27 30 32 34 36 41 mmï 30x32 36x41 mm

v 200 mmo 500 g 1500 g

d h 270 mmd 7 292 mmd ) d 8 125 + 250 mm

T 10 11 12 13 14 15 16 17 18 19 21 22 23 24 26 27 28 30 32 mmT 5 6 7 8 9 10 12 14 mm

? 4 5,5 6,5 8 mm; PH1 PH2

ç 250x24 mmç 125x10x5 mmá 120x12x5 mmá 1,5 3 4 mmá 120x12x5 mmo 300 g

ï 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 mm

T 1 j 10 13 14 16 17 18 19 21 22 23 24 27 mm

e h 510 mmU 1 22 24 27 30 32 36 38 41 46 50 mme + e ' 200 + 400 mm

T 9 E10 E11 E12 E14 E16 E18 E20 E24T 7 T20 T25 T27 T30 T40 T45 T50 T55U 7 T60 T70 T80 T90 T100

1500 ES-1993 U-20 1500 ES-19 1500 ES-2150 PH

1500 ES-350 1500 ES-6 1500 ES-145

1500 ES-K 19 L

32 EMU-2

055054

Universal pliers 10" 15 settingsPower combination pliers 180 mmTelephone pliers 160 mmPower side cutter 160 mm

FURTHER TOOLS

Brake spring pliers 330 mm

Brake spring pliers 500 mm

Tool holding rail 1/2" empty

Tyre lever 24" 610 mm

Hacksaw 410 mm

Grip wrench 10"

INDIVIDUAL COMPONENTS AT A GLANCETool assortment NFZ

3 8x10 10x11 12x14 13x15 17x19 mmT 1 j 17 19 21 mmT j K 1900Z T j j ? 7 8 9 12j 5 5 6 8 10j ; 1 2 3 4

c h 200 mmc 8 125 + 250 mmS 3 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 mmS h 5 6 7 8 10S . M5 M6 M8 M10S 7 T20 T25 T27 T30 T40 T45 T50

b h 127 mmb 8 97 mmb 7 115 mmR 3 4 5 5,5 6 7 8 9 10 11 12 13 mmR i E4 E5 E6 E7 E8 E10D l 4 5,5 6,5 8 mmD h 2,5 3 4 5 6 mm

D j T6 T7 T8 T9D . M5 M6 M8D k PH1 PH2 PH3D m PZ1 PZ2 PZ3 T10 T15 T20 T25 T27 T30 T40b D D b Y

D Y I d h 270 mmd 8 63 mmd 8 125 + 250 mmT 3 10 11 12 13 14 15 16 17 18 19 21 22 24 27 30 32 mmT 5 5 6 7 8 9 10 12 14 mm

ì 3 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 mmA 2 2,5 3 4 5 6 8 10 mm

l 3,5 5,5 6,5 8 mmk PH1 PH2o 500 gá 120x12x5 mm

á 1,5 3 4 mmç 250x24 mmç 125x10x5 mmá 120x12x5 mm

ï 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 24x27 mmB M 8000 A 1 A 2B N 8000 A 21A M 8000 J 1 J 2A N 8000 J 21

T . 6 8 10 12T 5 5-90 6-90 8-90 10-140 12-140 14-140T 7 T20 T25 T27 T30 T40 T45 T50 T55 T60T 7 T20-100 T25-100 T27-100 T30-100 T40-100 T45-100 T50-100 T55-100 T60-100

TS CT2-D30

TS CT2-6-8000 TS CT2-ITX19

TS CT2-D19-D20

TS CT2-7 TS CT2-2154SK-119 TS CT2-142

TS

-14

7

TS

-19

0

TS

-30

8

MAGICLEGEND

TS-147 / TS-190 / TS-308Individual components at a glance

TS

-14

7 (

147

pie

ces

)

TS

-19

0 (

190

pie

ces

)

Universal pliers 10" 15 settingsPower combination pliers 180 mmMultiple pliers 200 mmPower side cutter 180 mml Ø 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 / Ø 3.3 4.2 6.8 10.2

Ï 3 8 10 12 13 14 15 16 17 18 19 mmÇ 3 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 mm7 T7 T8 T9 T10 T15 T20 T25 T30 T40~ 5 m

TS CT2-2133-2163TX TS CT2-710TS CT2-7R-2

T 10 11 12 13 14 15 16 17 18 19 21 22 23 24 26 27 28 30 32 mmT 5 6 7 8 9 10 12 14 mm

R 1 4 5 5,5 6 7 8 9 10 11 12 13 14 mmR 5 3 4 5 6 8 mmR 7 T8 T9 T10 T15 T20 T25 T27 T30 T40R 9 E4 E5 E6 E7 E8 E10b 7 115 mmb 8 97 mmb ) b - b h 127 mm

? 4 5,5 6,5 8 mm; PH1 PH2

T 10 11 12 13 14 15 16 17 18 19 21 22 23 24 26 27 28 30 32 mmT ? 10x1,6 12x2 mmT ; PH2 PH3 PH4T . M8 M10

1500 ES-191500 ES-201500 ES-2150 PH 1500 ES-19 IS

3 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 mmk 2 2,5 3 4 5 6 8 10 mm

d h 270 mmd 7 292 mmd ) d 8 125 + 250 mm

ç 250x24 mmç 125x10x5 mmá 120x12x5 mm

á 1,5 3 4 mmá 120x12x5 mmo 300 g

1500 ES-1 B1500 ES-1993 U-20 1500 ES-3501500 ES-145

057056

TS

-30

8

S 1

50

0 E

S-0

1

S 1

50

0 E

S-0

2

S 1

50

0 E

S-0

3

S 1500 ES-01 / S 1500 ES-02 / S 1500 ES-03Individual components at a glance

S 1

50

0 E

S-0

1 (

104

pie

ces

)

TS

-30

8 (

30

8 p

iece

s )

7 T10 T15 T20 T25 T30 T401 5,5 6 7 8 9 10 mmGrip wrench 10"

Recoilless hammer Ø 40 mmBolt extractor set 5 pcs M3-M18Feeler gauge set, fan pattern 0.05-1.00 mm] \ ^ _ `. 240 mmpC 200 mmN


only S 1500 ES-01

only S 1500 ES-02/03

ï 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 mm

3 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 mmk 2 2,5 3 4 5 6 8 10 mm

1500 ES-6 1500 ES-ITX 19 LKP 1500 ES-IN 19 LKM1500 ES-1 B

d h 270 mmd 7 292 mmd ) d 8 125 + 250 mm

1 5,5 6 7 8 9 10 mmR 1 4 5 5,5 6 7 8 9 10 11 12 13 14 mmR 5 3 4 5 6 8 mmR 7 T8 T9 T10 T15 T20 T25 T27 T30 T40R 9 E4 E5 E6 E7 E8 E10b 7 115 mm, b 8 97 mmb ) , b - , b h 127 mm

Ï 3 8 10 12 13 14 15 16 17 18 19 mm

1500 ES-1993 U-20 1500 ES-21331500 ES-20 1500 ES-7 R

ç 250x24 mmç 125x10x5 mmá 120x12x5 mmá 1,5 3 4 mm

á 120x12x5 mmo 300 g

1500 ES-7111500 ES-145 1500 ES-3501500 ES-VDE 145

T 1 j 10 13 14 17 19 mmj ? 7 8 9 12j 5 5 6 8 10j ; PH1 PH2 PH3 PH4T j K 1900Z T j

B M 8000 A 1 A 2B N 8000 A 21

A M 8000 J 1 J 2A N 8000 J 21

? 4 5,5 6,5 8 mm; PH1 PH2

1500 ES-K 19001500 ES-80001500 ES-2150 PH

T 5 5 6 7 8 9 10 12 14 17 mmT 5 5-90 6-90 8-90 10-140 12-140 14-140 mm

S 1

50

0 E

S-0

2

S 1

50

0 E

S-0

3

MAGIC

S 1

50

0 E

S-0

2 (

20

7 p

iece

s )

T 7 T20 T25 T27 T30 T40 T45 T50 T55 T60T 7 T20-100 T25-100 T27-100 T30-100 T40-100 T45-100 T50-100 T55-100 T60-1009 7 TORX® Gauge

Thread fileTweezersScriber 250 mm9 7 TORX® Gauge~ 5 mp


Universal pliers 10" 15 settingsVDE Heavy duty combination pliers 180 mmVDE Telephone pliers 160 mmVDE Side cutter 160 mm

only S 1500 ES-03

only S 1500 ES-02

Individual components at a glance

LEGEND

S 1500 ES-02 / S 1500 ES-03

5 2 2,5 3 4 5 6 7 8 10 mm3 8x10 10x11 12x14 13x15 17x19 mm

? 4 5,5 6,5 8< PZ1 PZ2

R 1 4 4,5 5 6 7 8 9 10 12 13 mmY ? 4 5,5 6,5 8Y 5 2,5 3 4 5 6Y . 5 6 8

b iR Yi YY -

Y 7 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40Y ; PH1 PH2 PH3Y < PZ1 PZ2 PZ3

1500 ES-DT 21421500 ES-400

1500 ES-VDE 2170 PZ

1500 CTB-20 BIT

3 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 mm

3 6x7 8x9 10x11 12x13 14x15 17x19 mm

7 T8 T10 T15 T20 T25 T30

3 8x9 10x11 12x13 14x15 16x17 mm

1500 ES-2 1500 ES-2 B 1500 ES-2163 TX

1500 ES-34

Å 8"

Cæ ? 3 mm 220-250 V

7 T10 T15 T20 T25 T27 T30 T40

k 2 2,5 3 4 5 6 8 10 mm

059058

S 1

50

0 E

S-0

3 (

32

5 p

iece

s )

Combination holding tool M3-M8Miniature LED lamp with swivel end

Bolt extractor set 5 pcs M3-M18

Key file set, 6 pieces Grip wrench 10" High-speed swivel disc 1/2"

Individual components at a glance

S 1

50

0 E

S-0

3

S 1500 ES-03

FURTHER TOOLS

GEDORE-Werkzeugfabrik GmbH & Co. KG

Remscheider Straße 149

42899 Remscheid · GERMANY

T +49 2191 596-0

F +49 2191 596-230

[email protected]

www.gedore.com

Brands of the GEDORE Group

gedore.com · carolus.de · ochsenkopf.com

3078167_Pro_GED_GWF_EN_MAGIC17

YOUR DEALER Delivery without decoration. Technical specifications subject to modifications.

No liability for printing errors. Please ask your local dealer.

Valid from 01/04/2017 until 31/03/2018

PROMOTION 2017 / EN - Gedore...excl. VAT €47, 80 €499, 00 PROMOTION 2017 / EN 1045 mm 510 mm 785...

Documents

Transcript of PROMOTION 2017 / EN - Gedore...excl. VAT €47, 80 €499, 00 PROMOTION 2017 / EN 1045 mm 510 mm 785...