Arenas, Ervin Jayk C.ME-3104

PROJECT PLAN I

I. NAME OF PROJECT: TOOLBOX

II. OBJECTIVES

1. To be able to create a simple toolbox out of GI Sheets

2. To be able to measure accurately and accordingly based on given parameters.

3. To be able to apply bench work properly in order to produce an accurate project.

4. To be able to practice safety inside the workshop.

III. MATERIALS/TOOLS NEEDED

Project Plan

200cm Iron bar

Galvanize Iron Sheet

Lock

Rivet and Riveter

Measuring Tools

Shears/Tinsnips

Center Punch

Drill/Drill Bit

Bench Vice /Vice Grip

Hammer

IV. DRAWING/ILLUSTRATIONS

V. STEPS / PROCEDURES

1. Apply the given dimensions on the project design on the GI Sheet.

2. Using the tinsnips cut the GI Sheet according to its measurement.

3. Bend and fold the GI Sheet on their desired shapes.

4. Mark the desired portion to be drilled.

5. Combine the parts of the bended GI Sheets and form the toolbox.

FOLLOW THE GIVEN LAYOUTS AND ASSEMBLE THE PIECES ACCORDINGLY.

VI. SKILLS LEARNED

1. How to measure accurately and efficiently.

2. How to cut GI sheets using shears.

3. How to bend GI sheets with the aid of bending machines and vises.

4. How to put hems on sharp edges.

5. How to use center punch.

6. How to put holes properly.

7. How to assemble parts and fasten rivets using riveter.

8. How to use mechanical equipments properly and safely.

9. How to apply safety first on workshop practice.