ProGraphix Paint Guide - traxxas.com
1
BODY PREP TIPS FOR BEST RESULTS ProGraphix ® Paint Guide Always paint in a well ventilated area. Paint masks and gloves are highly recommended. • Wash inside of body or use isopropyl alcohol • Completely dry body • Mask windows, if applicable • Mask the design using masking tape or #5846 paint masks • Paint colors darkest to lightest • Back fluorescent and candy paint with white and metallic paint with silver then white. • When finished painting, remove the overspray film and then apply exterior body decals. 1. Before use, shake the can vigorously for approximately 2 minutes after you hear the mixing ball rattle. 2. Spray at a distance of approximately 6 - 8 inches using an even back and forth motion. 3. The coverage capacity of Traxxas Custom Color Paint varies slightly from one color to the next. Always spray one very light coat at a time. The final result is obtained after applying 2 or more light coats. Continue applying light coats until desired coverage is obtained. 4. Allow the paint to dry for 5 minutes before applying the next coat and/or removing the masking film. 5. After use, turn the can upside down and spray for 2 seconds until the nozzle is empty. COLOR RECOMMENDED Backing Colors OPTIONAL Backing Colors Black –– White White –– Black Metallic Silver –– White Red White –– Brilliant Blue White –– Summit Yellow White –– Racing Green White –– Maxx® Orange White –– Fluorescents White –– Candy White (light), Black (dark) Any Color Metallic Blue –– White Metallic Black –– Black Mirror Chrome Acrylic Black Chrome Backer ––
Transcript of ProGraphix Paint Guide - traxxas.com
BODY PREP
TIPS
FOR BEST RESULTS
ProGraphix® Paint GuideAlways paint in a well ventilated area. Paint masks and gloves are highly recommended.
• Wash inside of body or use isopropyl alcohol• Completely dry body• Mask windows, if applicable• Mask the design using masking tape or #5846 paint masks
• Paint colors darkest to lightest• Back fluorescent and candy paint with white and metallic paint with silver then white. • When finished painting, remove the overspray film and then apply exterior body decals.
1. Before use, shake the can vigorously for approximately 2 minutes after you hear the mixing ball rattle.2. Spray at a distance of approximately 6 - 8 inches using an even back and forth motion. 3. The coverage capacity of Traxxas Custom Color Paint varies slightly from one color to the next. Always spray one very
light coat at a time. The final result is obtained after applying 2 or more light coats. Continue applying light coats until desired coverage is obtained.
4. Allow the paint to dry for 5 minutes before applying the next coat and/or removing the masking film.5. After use, turn the can upside down and spray for 2 seconds until the nozzle is empty.
COLOR RECOMMENDED Backing Colors
OPTIONAL Backing Colors
Black –– White
White –– Black
Metallic Silver –– White
Red White ––
Brilliant Blue White ––
Summit Yellow White ––
Racing Green White ––
Maxx® Orange White ––
Fluorescents White ––
Candy White (light), Black (dark) Any Color
Metallic Blue –– White
Metallic Black –– Black
Mirror Chrome Acrylic Black Chrome Backer ––
