Program of Lectures and Posters - aba-brno.cz · Refining Sulphur Based Cathode Nanocomposite:...

16
The 16 th International Conference on Advanced Batteries, Accumulators and Fuel Cells Program of Lectures and Posters Organised by Brno University of Technology and co-sponsored by: The Electrochemical Society The International Society of Electrochemistry Shmuel De-Leon Energy Ltd. Centre for Research and Utilization of Renewable Energy Department of Electrical and Electronic Technology 1

Transcript of Program of Lectures and Posters - aba-brno.cz · Refining Sulphur Based Cathode Nanocomposite:...

  • The 16th International Conference on AdvancedBatteries, Accumulators and Fuel Cells

    Program of Lectures andPosters

    Organised by Brno University of Technologyand co-sponsored by:

    The Electrochemical Society

    The International Society of Electrochemistry

    Shmuel De-Leon Energy Ltd.

    Centre for Research and Utilization of Renewable Energy

    Department of Electrical and Electronic Technology

    1

  • Our sponsors:

    2

  • Sunday, August 30th

    17:00 – 20:00 Registration and get-together party

    Monday, August 31th

    8:00 Registration

    10:00 Opening of ABAF – 15th

    Prof. Ing. Jarmila Dědková, CSc.Dean of Faculty of Electrical Engineering and CommunicationProf. Ing. Jiří Vondrák, DrSc.Organisation CommitteeAss. Prof. Ing. Marie Sedlaříková, CSc.Organisation Committee

    10:30 Prof. Petr VanýsekECS – The Electrochemical Society:A Look at the Present with Our Vision for the Future

    10:40 M. Doležal Information about program SoMoPro III

    10:50 Coffee break

    Materials for Lithium-ion Batteries and Accumulators

    11:00 – 12:00 Walkowiak et al.Graphene and graphene composites in electrochemical capacitors and Li-ion

    L. Niedzicki et al. Imidazole anions used as electrolyte components

    M. Nimmervol et al.Impact of Physicochemical Parameters on the Electrochemical Behavior of Li[Ni1/3Mn1/3Co1/3]O2

    12:00 Time for lunch

    3

  • 13:10 – 14:00 J. Moskon et al.Electrochemical transport phenomena in insertion batteries: selected theoretical and practical aspects

    N. A. Galiote et al.The role of non-aqueous solvents in orr of lithium-oxygen batteries

    E. Karpierz et al.Lithium Salt-Glyme-Ionic Liquids Molten Mixtures as Lithium Conducing Electrolyte

    14:00 Coffee Break

    14:15 – 15:15 M. Kasprzyk el al New Lithium Electrolytes for Low Temperature Applications

    T. Kazda et al.Study of the properties of High voltage spinel cathodes

    A. Krause et al.Silicon nanowires as anode material in lithium-sulfur full-cell

    15:15 Coffee Break

    15:30 – 16:15 O. Čech et al.The influence of residual alkaline ion content in TiO2(B) on its li-ion insertionproperties

    J. Vondrak et al.Application of fire retardants in electrolytes for lithium ion

    16:15 Poster section

    17:15 Social Evening

    Tuesday, September 1st

    9:00 – 10:00 M. Swierczynski et al.Investigation of Multidimensional Electrothermal Impedance Spectroscopy Measurement on Lithium Ion Battery Cell

    M. Osinska-Broniarz et al.Preparation and characterization of gel polymer electrolytes based on electrospun PLA/PHB membranes for lithium-ion batteries.

    4

  • D. V. Carvalho et al.SiO2-Hydroxypropyl Guar Gum Based Separator for Lithium-Ion Batteries

    10:00 Coffee Break

    10:15 – 11:15 A. Straková-Fedorkovál et al.High Performance Sulfur Cathode Composites with MWCNTs Conductive Additive

    V. Knap et al.Study on Self-discharge Behavior for Operation of Lithium-Sulfur Batteries

    J. Vondrák et al.Ionic Liquids in Electrochemical Power Sources

    11:15 Coffee Break

    11:30 – 12:50 J. Becking et al. Surface Modification of Lithium Metal in Lithium-Metal Batteries

    Supercapacitors

    О. I. Milovanova et al.Electrolytes based on dimethyl sulfoxide and tetraalkylammonium salts for electrochemical double-layer capacitors

    Na-ion batteries

    M. Keller et al.Synthesis and Characterization of a Novel Layered Cathode Material with Superior Performance for Na-ion Batteries

    Fuel cells

    M. Morte Various Loads In A Microgrid With Hydrogen Energy Storage

    12:50 Time for Lunch

    14:10 Poster Section

    15:15 Sightseeing of Brno

    5

  • 17:30 Evening Meal, Špilberk

    Wednesday, September 2nd

    The Other Modern Systems for Batteries

    9:00 – 10:00 G. Fafilek et al.Analytical Applications for High Temperature Electrochemical Systems

    Jie Ding et al.Combining the advantages of both liquid and solid electrolytes with magneto-rheology

    P. Vanýsek et al.Investigation of Vanadium Oxidation States in Sulfuric Acid by Voltammetryand Electrochemical Impedance Spectroscopy

    10:00 Coffee Break

    6

  • Application of Batteries for Electromobility and Industry

    10:15 – 11:35 J. MarušinecTypes of Batteries in Present Electric Cars

    J. Kašpárek Experimental Production of Li-Accumulators In Czechia

    P. Vorel et al.Possibilities of trolleybus transportation energy demand reduction

    Z. BitarNew development for energy applications at Bio-Logic SAS corporationPresentation of Bio-Logic

    11:35 Time for Lunch

    12:35 Poster section

    14:00 FEEC Laboratories

    17:00 Closing Ceremony, Dinner

    7

  • List of Posters

    Section: MATERIALS FOR LITHIUM-ION BATTERIES

    M. Jahn, M. Sedlaříková, J. VondrákGalvanically prepared layers lead as the negative electrode of lithium cells

    M. Juračka,T. Gottwald, M. Sedlaříková, J. VondrákLithium sulfur batteries

    T. Kazda, P Čudek, J. Vondrák, M. Sedlaříková, M. SlávikLithium-sulfur accumulator based on biological structures

    J. Libich, J. Máca, M. Sedlaříková and J. VondrákLithium-titanate as a negative electrode for lithium-ion batteries

    J. Świder, M. Molenda, R. Dziembaj Characterization and optimization of carbon nanocoatings on LiFePO4 particles for lithium-ion batteries

    M. Bakierska, M. Świętosławski, M. Molenda, R. DziembajImprovement of lithium ion diffusion in LiMn2O4 spinel cathode material by synergetic substitution with Ni and S

    M. Świętosławski, M. Molenda, M. Gajewska, R. DziembajStudies on the structural stability of nano-C/Li2MnSiO4 cathode material for Li-ion batteries

    P. Vyroubal, T. Kazda, J. Maxa, J. VondrákAnalysis of temperature field in lithium ion battery

    V. V. Kosilova, Y. A. Kravetsa, I. V. Romanovab, and S. A. KirillovaEffect of overdischarge on performance of LiNi0.5Mn1.5O4 cathode material for lithium-ion cells

    8

  • D.G. Gromadskyi, A.V. Potapenko, S.A. Kirillov Lithium manganese oxide synthesized by citric acid route and doped with polypyrroleas enhanced cathode for lithium-ion batteries

    M. Ceylan, E.C. Cengiz, R. Demir-Calan, A. BalikciAn Equivalent Electrical Circuit Model for Li-S Batteries

    G.Simha Martynková et al.Refining Sulphur Based Cathode Nanocomposite: Mechanofusion by Jet Milling,

    Section: NEW MATERIALS FOR FUEL CELLS

    A. Schechter, H. Teller, S. O. DaninoAnodes based on Tin and Platinum for methanol electrooxidation in acid fuel cell

    A. Martyla, M. Osinska-Broniarz, B. Marciniec, R. PrzekopInfluence of octakis (3-chloropropyl) octasilsesquioxane as a nanofiller on the electrochemical properties of PVDF/HFP membranes

    T. Mikolajczyk, B. PierozynskiHydrogen evolution at platinum-modified nickel foam catalyst

    Section: AQUEOUS AND SPECIAL BATTERIES

    D. Fryda, J. Zimáková, S. Vaculík, P. BačaThe use of ceramics in the positive electrode active mass lead-acid battery

    T. Gottwald, M. Sedlaříková, J. Vondrák, M. JuračkaCarbon as a part of anode material for rechargeable sodium ion batteries

    P. KřivíkTemperature changes during pulse charging of lead acid battery in oxygen cycle regime

    A. B. Hashemi, R. Trócoli, F. La Mantia9

  • Direct evidence of hydrogen evolution in aqueous zinc-ion batteries based on copper hexacyanoferrate

    P. Swoboda, G. Lota, A. Sierczyńska, K. Lota, M. Osińska-Broniarz, R. MańczakInfluence of the electrode preparation method on the electrochemical performance of metal hydride electrodes containing metal-carbon composites

    A. Chojnacka, M. Molenda, J. Świder, R. DziembajInfluence of carbon origin on electrochemical performance of carbon-tin anode nanocomposites

    P. Vyroubal, J. Maxa, P. BačaOptimization of lead acid battery grid shapes

    J. Zimáková, S. Vaculík, D. Fryda, P. BačaDegradation mechanisms in lead acid accumulators

    J. Martis, P. Vorel, P. Prochazka, R. Cipin, I. Pazdera, D. CervinkaFast-discharging apparatus 0 – 400 A / 2 – 4.2 V for testing of lithium cells

    D. G. GromadskyiSilver sulphate planar reference electrode for in-situ study of the supercapacitor electrodes with neutral aqueous electrolytes

    S. Vaculík, J. Zimáková, D. Fryda, P. BačaEffect of aditives added to the electrolyte

    Section: PHOTOVOLTAIC SYSTEMS

    J. Hylský, D. Strachala, J. VaněkAnalysis of photovoltaic modules after 20 years in service

    M. Janda, K. JandováSimulation of the impact of hail on the photovoltaic panel in Ansys Workbench

    10

  • M. Kadlec, J. Vaněk, M. Sionová, M. WeiterProcessing and optimization of the perovskite solar cell

    J. Vanek, Z. Chobola, M. LuňákLow-frequency noise diagnostic of silicon concentrator photovoltaic cell with very high efficiency

    P. Vyroubal, J. Maxa, D. HladkýConcentrator photovoltaic panel in practice – heating of the family house

    11

  • Section: MISCELANEOUS

    N. BentaharCoke production from heavy fractions and Algerian oil residues

    T. Binar, J. Sukáč, J. Vondrák, K. Šilnger, J. Křestan Proving Ultra-hard Steel Quality by means of Measuring Ballistic Resistance Influen-cing the Life Cycle of the Material within a Specific Temperature Range

    T. Binar, J. Sukáč, K. Šilinger, M. Zatloukal, S. RolcThe steel ballistic resistance directly affecting logistics-related expenditures

    F. Onderka, D. DobrockýSurface structure of the total joint replacement after hydroxyapatite application

    N. Ben Tahar, H. MimounCoke production from the Algerian oil fractions and residues

    N. Ben Tahar, H. MimounCatalytic Process for recovery Algerian condensate

    N. Ben Tahar ,H.MimounCoke production from heavy fractions and Algerian oil residues

    M. Sedlaříková, J. Vondrák, O. Panáková, M. BachmayerPreparation and corrosion of porous iron based materials for implantation

    D. Strachala, J. Hylský, M. FrkDetermination of the temperature coefficient of volume expansion heat - transfer fluids by using refractometry

    J. Sukáč, T. Binar, T. Kazda, K. ŠilingerSpring steel heat treatment for the quality enhancement of life cycles of military vehicles components

    12

  • J. Sukáč, T. Binar, M. Sedlaříková, K. ŠilingerThe assessment of a material life cycle based on an analysis of fracture surfaces after fatigue failure

    G. Tsimekas, E. Papastergiades, C. Savaniu, P. Connor, J.T.S. Irvine, N.E. KiratzisInsights into the effect of deposition temperature on YSZ and CGO thin films fabricated by spray pyrolysis

    Doan T. Van The influence of surface technologies on plasma nitrided 42CrMo4 steel

    13

  • Notes

    14

  • 15

  • 16