Profit Maximization, Supply, Market Structures, and Resource Allocation.
-
date post
19-Dec-2015 -
Category
Documents
-
view
223 -
download
1
Transcript of Profit Maximization, Supply, Market Structures, and Resource Allocation.
Profit Maximization, Supply, Market Structures, and Resource
Allocation
Market Structure
• Firms are assumed to maximize economic profits • Economic Profit = Revenue – Total Opportunity
Costs = Explicit and Implicit Costs• Costs are dependent on technology and input
prices• Revenue is dependent upon the market structure in
which a firm operates• Therefore, the profit maximization decision must
be analyzed by market structures
Market Structures
• Competitive Markets
• Monopoly
• Oligopoly
• Monopolistic Competition
Quick Overview of Supply and Resource Allocation in Competitive
Markets• Marginal benefits from a firms perspective are marginal
revenue from selling output
• Marginal revenue equal the extra revenue from selling another unit of output
• Assuming the firm produces (does not shutdown), the firm will maximize profit (or minimize losses) where MR=MC
• The level of output will determine the costs of production (measured by ATC)
• Comparing price to average costs show if the firm is making profits, losses or will shutdown production
• All the buyers in the market combined form the market demand curve and all the sellers for the market supply curve
• Market demand and supply determine the price and along with firms’ costs determine economic profits (hereafter simply profits)
• Changes in demand and supply, cause market prices to change, and thus cause profits to rise or fall
• In the short-run, existing firms in an industry change production as price changes.
• In the transition to the long-run, firms enter or exit an industry depending on whether profits are greater than or less than zero.
• In the long-run, profits are driven to zero or to the level of NORMAL profits (accounting profits that just cover all opportunity costs).
• Resource allocation is determined by:– Buyers and sellers follow their self-interest
• Buyers maximize utility
• Seller maximize profit
– Market demand reflects buyer behavior (and thus each individual buyers behavior) and market supply reflect seller behaviors (and thus individual firm behavior)
– Prices signal increases or decreases in quantity demand and supply and profits signal resources to enter or exit an industry causing market supply to change
– Long-run equilibrium occurs where:• The price paid by the consumer, which is equal to
the marginal benefit of another unit, is just equal to the marginal cost, which is equal to the opportunity cost of another unit to society.
MB = MC
• From the videos, – Resources dedicated to farming have decreased – If rents are not controlled, the supply of
housing will respond to increased demand without shortages
– The same is true of gasoline and water– Also, in class, DVDs versus VCRs
• This is Adam Smith’s “Invisible Hand at work”. – Every individual necessarily labours to render the annual revenue
of the society as great as he can. He generally neither intends to promote the public interest, nor knows how much he is promoting it...He intends only his own gain, and he is in this, as in many other cases, led by an invisible hand to promote an end which was no part of his intention. Nor is it always the worse for society that it was no part of his intention. By pursuing his own interest he frequently promotes that of the society more effectually than when he really intends to promote it. I have never known much good done by those who affected to trade for the public good. Wealth of Nations, 1776)
Marginal Revenue and Market Structure
• Competitive markets – sellers are price takers so MR = Market Price, MR =P
• Monopoly – the seller is a price maker and faces the entire market demand curve so MR < Price
• Oligopoly – the seller directly competes with a few firms so MR depends on the actions of competitors
• Monopolistic Competition – sellers possess some market power and can set their own prices in the short-run, so MR<P
Competitive Markets or Pure Competition
• Assumptions revisited– Many buyers and sellers
• Each buyer and seller is a price taker
– Homogenous or identical products• Competition is based only on the price
– Perfect information or knowledge• All firms have access to the same technology
• Competition is based upon price
– Firms can freely enter or exit• Profits will be eliminated in the long-run
Revenue in Competitive Markets
• The market demand and supply curves determine the equilibrium price and quantity and the price that buyers will pay and sellers receive
• As with producer surplus, sellers are price takers and the price they receive is their MR. The marginal revenue and the price remain the same no matter how much output is sold.
Table 1 Total, Average, and Marginal Revenue for a Competitive Firm
Copyright©2004 South-Western
Competitive Firm in the Short-run
• Short-run – at least one fixed factor = fixed costs. Assume the plant size is fixed.
• Set MR=MC to find profit maximizing level of output. Use the average cost curves to determine whether one – Operates and earn profits
– Operate and breakeven
– Operates and make losses
– Shutdowns and minimize losses
Table 2 Profit Maximization: A Numerical Example
Copyright©2004 South-Western
Figure 1 Profit Maximization for a Competitive Firm
Copyright © 2004 South-Western
Quantity0
Costsand
Revenue
MC
ATC
AVC
MC1
Q1
MC2
Q2
The firm maximizesprofit by producing the quantity at whichmarginal cost equalsmarginal revenue.
QMAX
P = MR1 = MR2 P = AR = MR
Conditions for Profits, Breakeven, Losses and Shutdown• Profits
– P > ATC
• Breakeven– P = ATC
• Fixed Costs are sunk costs and irrelevant to decision-making. To operate you must cover variable costs!
• Losses but operate– P > AVC but P < ATC or– ATC < P < AVC
• Shutdown – P > AVC
Figure 5 Profit as the Area between Price and Average Total Cost
Copyright © 2004 South-Western
(a) A Firm with Profits
Quantity0
Price
P = AR = MR
ATCMC
P
ATC
Q(profit-maximizing quantity)
Profit
Figure 5 Profit as the Area between Price and Average Total Cost
Copyright © 2004 South-Western
(b) A Firm with Losses
Quantity0
Price
ATCMC
(loss-minimizing quantity)
P = AR = MRP
ATC
Q
Loss
Short-run Losses
• Shutdown occurs when a firm cannot cover its variable costs.
• If a firm operated with revenues that did not cover variable costs, it would lose more than their fixed costs.
• Therefore, a firm must cover its variable costs first. If it can cover them it can pay down some of the fixed costs.
Long-run Supply and Price Determination
• Long-run – all factors are variable = no fixed costs and plant size can be changed, ALSO firms can enter and exit
• If economic profits are positive, new firms will enter.• If economic profits are negative, existing firms will
exit.• Long-run equilibrium:
– Firms must chose the plant that minimizes LRATC or they will suffer losses.
– Economic profits are reduced to zero.
• Therefore, supply is more elastic in the long-run.
Figure 7 Market Supply with Entry and Exit
Copyright © 2004 South-Western
(a) Firm’s Zero-Profit Condition
Quantity (firm)0
Price
(b) Market Supply
Quantity (market)
Price
0
P = minimumATC
Supply
MC
ATC
LRMC
LRATC
Figure 8 An Increase in Demand in the Short Run and Long Run
Firm
(a) Initial Condition
Quantity (firm)0
Price
Market
Quantity (market)
Price
0
DDemand, 1
SShort-run supply, 1
P1
ATC
Long-runsupply
P1
1Q
A
MC
Figure 8 An Increase in Demand in the Short Run and Long Run
Copyright © 2004 South-Western
P1
Firm
(c) Long-Run Response
Quantity (firm)0
Price
MC ATC
Market
Quantity (market)
Price
0
P1
P2
Q1 Q2
Long-runsupply
B
D1
D2
S1
A
S2
Q3
C
Long-run Supply Curve
• Constant cost industries – horizontal or perfectly elastic supply
• Increasing cost industries – upward sloping supply– Some resource may be available in limited quantities
(farm land)– Some resources may increase in cost or be less
productive (skilled labor)
• Decreasing cost industries – downward sloping supply– Increased output may stimulate increased productivity or
technological change (computers)
Competitive Markets:Short-run and Long-run
• Short-run supply response to changes in demand are to increase or decrease the use of existing capacity.
• Long-run supply response is to build efficient plant size and increase or decrease capacity.
• In both the short-run and long-run, the profit maximizing behavior of firms leads to supply responses to accommodate changes in demand.
• In the short-run, prices act as signals and, in the long-run,prices and profits act as signals to increase or decrease output.
Efficiency Revisited
• Maximize human satisfaction from resources = maximize total surplus = maximize consumer surplus + producer surplus.
• Two conditions:– Produce what is most highly valued and the
amount that maximizes total surplus– Produce it at the least possible cost.
• In the absence of market failures, competitive markets are efficient in both the short-run and the long-run:– Supply responds to what consumers demand
– Goods are produced at least possible cost
• Price and profits are extremely important as signals for the allocation of scarce resources.– Examples of when prices and profits no longer act as
signal are rent controls and price supports
Market Structures: Monopoly
MonopolyAssumptions
• One seller and many buyers– Implication: The seller is a price maker and the buyers
are price takers.
• Barriers to Entry – Ownership of a unique resource (Diamonds)– Government granted rights for exclusive production
(e.g. patents, copyrights, licenses, concessions)– Economies of scale and declining long-run average costs– Implication: Monopolist faces the entire market demand
curve and profits can persist in the short and long-run.
Limits to Monopoly
• Size of the market (Pavarotti versus Joe, uncongested bridge)
• Definition of market and close substitutes (ornamental versus industrial diamonds, bottled water).
• Potential competition
Production Decisions
• Monopolist versus competitive firm.– CF is a price taker who faces a perfectly elastic demand
curve MR=P– M is a price maker who faces the entire market demand
curve MR<P• Intuitive proof – to sell another unit the monopolist must lower the
price. This means lowering the price not only on the extra unit sold, but also all the other units the monopolist was selling. So MR = Price of the additional unit – the sum of the decreases in all the units previously sold ( e.g. selling 4 units @$100, to sell the 5 unit the price must be lowered to $90, so the monopolist’s MR = $90 – 4X$10=$50)
• Tabular proof – see next table and handout• Graphical proof
A Monopoly’s Revenue
• Total Revenue
P Q = TR
• Average Revenue
TR/Q = AR = P
• Marginal Revenue
TR/Q = MR
Table 1 A Monopoly’s Total, Average, and Marginal Revenue
Copyright©2004 South-Western
Figure 2 Demand Curves for Competitive and Monopoly Firms
Copyright © 2004 South-Western
Quantity of Output
Demand
(a) A Competitive Firm’s Demand Curve (b) A Monopolist’s Demand Curve
0
Price
Quantity of Output0
Price
Demand
Figure 3 Demand and Marginal-Revenue Curves for a Monopoly
Copyright © 2004 South-Western
Quantity of Water
Price
$1110
9876543210
–1–2–3–4
Demand(averagerevenue)
Marginalrevenue
1 2 3 4 5 6 7 8
Profit Maximization
• A monopoly maximizes profit by producing the quantity at which marginal revenue equals marginal cost.
• It then uses the demand curve to find the price that will induce consumers to buy that quantity.
• Profit Maximization –– Set MR = MC to find Q that maximizes profits.– Use the market demand curve to find the P that the Q brings– Find ATC and AVC cost to determine profits, losses, or
shutdown.
• Difference between the monopolist decision and the competitive firms decision– The monopolist does not have a supply curve like the CF,
rather they pick a single price and quantity– Monopolists produce where P>MR and P>MCversus CFs
who produce where P=MR and P=MC.
Figure 4 Profit Maximization for a Monopoly
Copyright © 2004 South-Western
QuantityQ Q0
Costs andRevenue
Demand
Average total cost
Marginal revenue
Marginalcost
Monopolyprice
QMAX
B
1. The intersection of themarginal-revenue curveand the marginal-costcurve determines theprofit-maximizingquantity . . .
A
2. . . . and then the demandcurve shows the priceconsistent with this quantity.
Figure 5 The Monopolist’s Profit
Copyright © 2004 South-Western
Monopolyprofit
Averagetotalcost
Quantity
Monopolyprice
QMAX0
Costs andRevenue
Demand
Marginal cost
Marginal revenue
Average total cost
B
C
E
D
Figure 6 The Market for Drugs
Copyright © 2004 South-Western
Quantity0
Costs andRevenue
DemandMarginalrevenue
Priceduring
patent life
Monopolyquantity
Price afterpatent
expires
Marginalcost
Competitivequantity
Welfare Costs of Monopoly
• In competitive markets, firms produce where
P=MCAnd since
P=MB=willingness to budAnd
MC=willingness to sell
P=MC MB=MC orMaximum total surplus
• In monopoly,P>MR so
P>MC
Or
MB>MC
Output falls short of the efficient amount Deadweight Welfare Loss
Figure 7 The Efficient Level of Output
Copyright © 2004 South-Western
Quantity0
Price
Demand(value to buyers)
Marginal cost
Value to buyersis greater thancost to seller.
Value to buyersis less thancost to seller.
Costto
monopolist
Costto
monopolist
Valueto
buyers
Valueto
buyers
Efficientquantity
• Monopoly profit is not usually a social cost but a transfer of surplus from consumer to producer.
• Profit can be a social cost if extra costs are incurred to maintain it, such as political lobbying, or if the lack of competition leads to costs not being minimized (X-inefficiency again!)
Public Policy and MonopoliesWorking towards P=MC
• Attempts to increase competition through anti-trust legislation – Sherman Antitrust Act of 1890 – Examples: Breakup of Standard Oil and turning MA Bell into
Baby Bells
• Regulation – Natural Monopolies– P=MC doesn’t work with extensive economies of scale– Regulated forms have little incentive to minimize costs
• Public Ownership – Public utilities and the Postal Service
• Hands-off Approach