PROFILCO Catalog Short Description 2014
-
Upload
arhiacobandrei944 -
Category
Documents
-
view
230 -
download
0
Transcript of PROFILCO Catalog Short Description 2014
-
7/21/2019 PROFILCO Catalog Short Description 2014
1/82
-
7/21/2019 PROFILCO Catalog Short Description 2014
2/82
PROFILCO was
founded in 2001. The
plants manufacturing
capacity amounts to
9,000 tons of profiles a
year. PROFILCOs
facilities currently cover
an area of 17,000 m2.
One of the Europes
most modernmechanical equipment
includes an 1800 tones
extruder along with a
fully automated
production providing profiles with straight surfaces and excellent
geometries.
A couple of ultramodern electrostatic powder coating unitsone
horizontal and one vertical with two dyeing cabins of the latest
technology implementing a full cycle of chemical preparation
and a third dyeing unit specialized in wood colors utilizing the
sublimation method, as well as a new fully automated thermal-
brake profile production line supplement the industrial
production.
PROFILCO has established an extensive sales network in 25sales points in 6 countries: Greece, Bulgaria, Romania, Ukraine,
Serbia and F.Y.R.O.M.
RESEARCH AND DEVELOPMENT
PROFILCOs aluminum
systems are exclusively
designed by the
companys research and
development division.
The various applications
of the systems and fitting
operations of the
profiles, as well as the
design and use of the
accessories are studied
by the said division by
means of special
software. This is where
the profiles are designed and the products undergo the final
control before entering the market.
LOGISTICS
Profiles are handled and stored with the use of automatic
carriages and an automatic warehouse with capacity of 1600
tones. PROFILCO, aiming at the best possible service offered to
its clients in terms of quality and time of delivery, has ensured
that the logistics division is manned with specialized staff. The
members of the logistics division are fully aware of the markets
-
7/21/2019 PROFILCO Catalog Short Description 2014
3/82
needs and plan and distribute the products through a high-
technology ERP system.
CERTIFICATION
The companys aluminum profile manufacturing process and
conditions as a whole comply with ISO 9001, a standard
guaranteeing the high quality of its products. Coating process is
followed dy SEASIDE CERTIFICATE for improved durability of
the electostatic paint at coastal areas. Moreover, the companys
systems have been certified by laboratories approved by the
European Union.
THE ENVIRONMENT
PROFILCO is an extremely environmentally aware company and
has therefore installed and set in operation an ultramodern
biological waste treatment unit. The physicochemical unit
processes the dyeing units liquid waste by means of chemical
reagents and special techniques. In this way, the company
ensures the environment-friendly nature of the manufacturing
processes prevents and restricts the volume of waste and saves
on energy, natural resources and consumable stores.
02
PROFILCO 2001.
9.000 .
17.000 .
,
,
1.800
.
,
,
,
.
Profilco
30 : ,
, , , , F.Y.R.O.M.
-
7/21/2019 PROFILCO Catalog Short Description 2014
4/82
PROFILCO
.
.
.
LOGISTICS
H
1.600
.
. PROFILCO
logistics .
logistics ,
ERP .
ISO 9001
.
SEASIDE
CERTIFICATE
.
.
PROFILCO
.
chrome free
.
,
,
, .
03
PROFILCO
Short description of profiles 2014
Contents //
Sykotherm70
PR 63
Opening Thermal Break Systems //
Thermal Break Systems //
06
09
-
7/21/2019 PROFILCO Catalog Short Description 2014
5/82
PR 72
PR 62
PR 52
PR 43
PR 40thermo
Sliding /Lift Sliding Thermal Break Systems//
25
PR 45
PR 32thermo
PR 40
PR 35
PR 32
PR 26
PR 50
PR 50
PR 50
PR 16
PR 48
PR 44
PR 20
AC14
PR18
PR 14
PR 17
PR 10
04
Thermal Break Systems // 13
Thermal Break Systems // 15
Opening Systems // 17
Opening Systems //
23
Sliding / Lift Sliding Systems // 31
Sliding Systems // 33
Sliding Systems // 36
Sliding Systems // 38
Curtain Wall // Standard 40
Curtain Wall // Semi Stuctural 46
Curtain Wall // Stuctural 48
Folding Doors // 52
Partitions // 54
Sliding Thermal Break Systems // 27
Rolling Shutters // 61
56Photovoltaic support bases //
59Mosquito net profiles //
60Panel profiles //
Polycarbonate //
63
Universal // AT 65
Sliding / Lift Sliding Systems /// 29
Rails - Fences //- 50
-
7/21/2019 PROFILCO Catalog Short Description 2014
6/82
-
7/21/2019 PROFILCO Catalog Short Description 2014
7/82
05
Sykotherm70 Opening Thermal BreakSystems
The SYKOTHERM 70 of SYKON is the most appropriate solution with coplanar sufface design for heavy constructionsof high specifications, because of the fact that the combination of weight, quality, technical solutions of heat insulationsand static solutions is one of the best in Europe. Sykotherm series 70 of SYKON is suitable for opening, tilt and turnand tilt and sliding constructions.
SYKOTHERM 70 SYKON , , . , , .
-
7/21/2019 PROFILCO Catalog Short Description 2014
8/82
Sykotherm70 basic features of
windows
- Polyamide 34 mm with three chambers.
- Heat insulation according the standard DIN V4108-4:2002-02 with heat insulation coefficient Uf=1,8W/(m2*K).
- Sound-proof in category IV according thestandard DIN 4109.
- Anti-burglar category WK1 and WK2 accordingDIN ENV 1627.
- Frames basic width 70 mm, sashs 80mm anddepending on the static needs of the constructionmullions width up to 145mm.
- Single and double leaf windows, opening right orleft, inwards and outwards with tilt and turn or tilt andsliding mechanisms.
- Frames can embrace glazing up to 51mm and thesashes can embrace glazing up to 61mm.
Sykotherm70 basic features of
doors
- Polyamides 25 mm with two chambers.
- Certification of heat insulation from IFTRosenheim according EN ISO 10077-2 Uf=2.4-2.5W/(m2*K).
- Anti-burglar category WK1 according DIN ENV1627.
- Frames and sashs basic width 70 mm anddepending on the static needs of the constructionmullions width up to 145 mm.
- Single and double leaf doors opening right or left,inwards or outwards. Double action doors.
06
Sykotherm70
- 34 mm .
- DIN V
4108-4:2002-02 2 *K).
Uf =1,8 W/(m
- V DIN 4109.
- WK1 WK2 DIN ENV 1627.
- 70 mm 80 mm, 145 mm .
- , VW.
- 51 mm 61 mm.
Sykotherm70
- 25 mm .
- IFTRosenheim EN ISO 10077-2 Uf =2.4-2.5 W/(m2*K).
- WK 1 DIN ENV1627.
- 70 mm, 145 mm .
- , . .
PROFILCO
Aluminium Systems //
Frames //
-
7/21/2019 PROFILCO Catalog Short Description 2014
9/82
AP007-028 AP007-029 AP007-069 AP007-012 AP007-021
AP007-032 AP007-035 AP007-003
1297 gr/m 1410 gr/m 1599 gr/m 1753 gr/m 1786 gr/m
Sashes //
1624 gr/m 1443 gr/m 1986 gr/m 1925 gr/m 1948 gr/m
T-Profiles //
AP007-034
1403 gr/m
AP007-031
1516 gr/m
AP007-036
1705 gr/m
07
-
7/21/2019 PROFILCO Catalog Short Description 2014
10/82
Sykotherm70 Opening Thermal BreakSystems
Bottom Rail //
Rebate for mullions //
AP007-078
1361 gr/m
AP007-004
2511 gr/m
Glazing beads //
AP006-170 AP006-171 AP006-172 AP006-173 AP006-174 AP006-175 AP006-176
281 gr/m 292 gr/m 307 gr/m 318 gr/m 330 gr/m 352 gr/m 368 gr/m
Additional profiles //
AP007-008 AP006-1261178 gr/m 310 gr/m
08
-
7/21/2019 PROFILCO Catalog Short Description 2014
11/82
PR63 Opening Thermal Break Systems
High specification system with thermal insulation provides optimum protection from cold, heat, as well as, noise ensuringideal conditions at the internal spaces which protects. It is the best solution for people with high expectations fromaluminium systems to their constructions offering excellent technical and aesthetic solutions.
, , , , . ,o .
-
7/21/2019 PROFILCO Catalog Short Description 2014
12/82
PROFILCO
Aluminium Systems //
Basic features PR63- Sash width 63 mm.
- Frame width 55 - 108 mm.
- Embraces double glazing 10 - 40 mm.
- Heat transfer coefficient 2.7 w/m2k.
- Heat transfer and noise blocked out by using 24 mmpolyamide.
- Energy saving by reducing the cost of heating andcooling.
- Preventing the water condensation on the indoor sideof the profile.
- Complete waterproof is assured with the speciallydesigned drainage channels for all profiles. Additionallythree EPDM gaskets ensure the maximum water and airtightness.
- The central gasket is installed with a vulcanizedcorner gasket in such a way which prohibits leakage fromthe 45corner.
- Special designed profiles for constructing entrancedoors without bottom rail, easier, faster and without specialprofile treatment.
- Specially designed thermal break profiles ensure theperfect tightness at the bottom of the entrance doors.
- The assembly can be accomplished also with the use
of
PR63- 63 mm.
- 55 - 108 mm.
- 10 - 40 mm.
- 2,7 w/m2k.
- 24 mm .
- .
- .
- EPDM .
- .
- , .
- .
-
.
a gripping machine and special adhesive.
09
Frames //
AP063-211 AP063-212 AP063-210 AP063-207 AP063-2041022 gr/m 1139 gr/m 1207 gr/m 1427 gr/m 1584 gr/m
AP063-209
1593 gr/m
AP063-217
2460 gr/m
AP063-213
1342 gr/m
AP063-215
1555 gr/m
AP063-216
2043 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
13/82
Sashes //
AP063-310 AP063-313 AP063-309 AP063-311 AP063-312 AP063-3071367 gr/m 1228 gr/m 1565 gr/m 1761 gr/m 1529 gr/m 1987 gr/m
AP063-314 AP063-3151726 gr/m 1494 gr/m
10
PR63 Opening Thermal Break Systems
T-Profiles //
-
7/21/2019 PROFILCO Catalog Short Description 2014
14/82
PROFILCO
Aluminium Systems //
AP063-401 AP063-402 AP063-403 AP063-406 AP063-407
1272 gr/m 1488 gr/m 1474 gr/m 1560 gr/m
AP063-408
1354 gr/m
AP063-518
2111 gr/m
Rebate for mullions //
1406 gr/m 1524 gr/m
Mullions //
AP063-516 AP063-517
1642 gr/m 1908 gr/m
Additional profiles //
14.3
AP063-511 AP063-513 AP063-512 AP043-506 AP043-507
979 gr/m 1060 gr/m 715 gr/m 138gr/m 202gr/m
11
10.3
23.4
40.7
-
7/21/2019 PROFILCO Catalog Short Description 2014
15/82
Profiles for perimetric //
AP063-316
1400 gr/m
AP063-519
1389 gr/m
12
PR72Opening Thermal Break Systems
PR72 thermal break system with perimetric locking. It is a high specification system for opening windows and balconydoors providing optimum protection from cold, heat as well as external noise, providing excellent living conditions at thespaces which protects.
PR72. , .
-
7/21/2019 PROFILCO Catalog Short Description 2014
16/82
PROFILCO
Aluminium Systems //
Basic features PR72
- Special steel lockings are installed on the sashperimetrically in order to provide the maximum safetyto the construction
- Frame and sash width 72 mm.
- hermal break profiles with the use of 24 mmpolyamide.
- A specially designed central EPDM gasket whichoverlaping can be adjusted between 5 mm and 8 mm,increases the tolerance for the profile cut and reducesthe danger of malfunctions due to bad adjustment ofthe sashes. This provides the perfect seal of theopening part of the window at all circumstances.
- EPDM gaskets ensure the endurance.
- 8 mm sash overlap for better seal.
- Bigger profile thickness for endured constructions.
- Drainage channels in all frames and sashes.
- Connection of the profiles with corner joints withpin or with the use of gripping machine.
- Same corner joint for frames and sashes.
- Special designed corner joint of the frame and
sash in order to withstand safely 130 kg maximum
load.
PR72
- .
- 72 mm.
- 24 mm.
- EPDM 5 mm 8 mm , . .
- EPDM .
- 8 mm .
-
.
- .
- .
- .
-
130 Kg. 13
Frames //
AP072-201 AP072-202 AP072-2031483 gr/m 1816 gr/m 2568 gr/m
Sashes // T-Profiles //
AP072-401 AP072- 301 AP072-
3021547 gr/m
1624 gr/m 2033 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
17/82
Rebate for mullions // Wall joining profile //
19.8
AP060-501
271 gr/m
AP072-501
1615 gr/m
Additional profiles //
AP060-901
324 gr/m
AP060-902
338 gr/m
AP060-903
302 gr/m
AP060-904
234 gr/m
AP072-511
1011 gr/m
AP072-502
792 gr/m
14
PR62 Opening Thermal Break System for doors System specially designed for entrance doors. Endured construction with profile thickness 1,6 mm and adjustable
heavy duty hinges. The manufacturer is now able to correspond in every architectural requirement and to constructsingle and double-leaf, inside and outside opening heavy duty entrance doors faster easier and more reliably.
. 1,6 mm
.
, , ,
.
25.8
29.2
26
16.7
-
7/21/2019 PROFILCO Catalog Short Description 2014
18/82
PROFILCO
Aluminium Systems //
Basic features PR62
- Frame and sash width 62mm.
- Thermal break profiles with the use of 20mm
polyamide.
- Thickness reinforcement in critical points for maximum
endurance (minimum thickness 1.6mm).
- Door sash is constructed by using the same profile atall sides without the use of a bottom rail.
- Profile connection realised either by gripping machineor by pattern plate and pin.
- Specially designed profiles for sealing at the lowerside of the door.
- Ensured waterproof of the constructions by usingspecial designed plastic plugs.
- Reinforced up to 2mm adjustable hinges that areeasily +_ mounted on the frame and sash.
- Striking plate mounting without machining.
- 2 sealing gaskets pursuing the European designingalu-minum systems philosophy.
- Special mounting for the threshold without machiningthe profile.
- Ability to embrace up to 48mm glass.
- Specially designed frame for adapting PR62 on PR50
PROFILCO Curtain Wall System.
PR62
- 62 mm.
- 20mm.
- E
( 1,6mm).
- .
- .
- .
- .
- 2 mm. +_
-
- .
- .
- 48 mm.
-
PR62 PR50 PROFILCO.
15
Frames // Sashes //
-
7/21/2019 PROFILCO Catalog Short Description 2014
19/82
AP062- 701
AP062-
704AP062-707
1664 gr/m 1786 gr/m2161 gr/m
T-Profiles //
Rebate for mullions //
AP062-708AP062-705
2126 gr/m1316 gr/m
Additional profiles //
AP062-703
867 gr/m
AP062-706
549 gr/m
16
PR52 Opening Systems
Complete system for opening, tilt and turn windows, entrance doors and shop windows. Beautiful smooth curves on theouter surface and straight that surface on the inside. Simple and easy assembled has been certified for windpressure,waterproof and strength.
, . . , , .
-
7/21/2019 PROFILCO Catalog Short Description 2014
20/82
PROFILCO
Aluminium Systems //
Basic features PR52
- Sash width 52 mm.
- Frame width 46 - 124 mm.
- Embraces double glazing 10 - 32 mm.
- Embraces a multiple locking system for greater safetyby providing sash profiles with PVC camera as well as withcamera European.
- Complete waterproof is assured with the speciallydesigned drainage channels for all profiles.
- Three EPDM gaskets are used for water and airtightness, which are mounted on a vulcanized cornergasket in such a way which prohibits leakage from the 45
corner.
- Specially designed plug for water drainage whichguaranties its functioning with extreme windy conditions.
- Double frame designed with water drainage channeland inclined surfaces so that the water is guided outsidethe construction. The upper surface is reinforced with 15%more aluminium in order to withstand extreme fatigue fromfootsteps. Nevertheless, with the reinforcement bettercutting and assembling is achieved.
- Profiles especialy designed for the construction ofentance doors without botton rail. Easy, economical andefficient to construct, without special building solutions.
- Special profiles designed for thresholds regarding thebottom sealing of entrance doors.
- Ability to use gripping machine for assembling.
- Construction of various corner types, do to specialy
designed profiles.
PR52
- 52 mm.
- 46 - 124 mm.
- 10 - 32 mm.
- PVC European.
- .
- EPDM 45 .
- .
- . 15% .
- . , .
- .
- .
-
.
17
-
7/21/2019 PROFILCO Catalog Short Description 2014
21/82
Frames //
AP052-220
837 gr/m
AP052-217
430 gr/m
AP052-210
1237 gr/m
AP052-213
1158 gr/m
AP052-211
1524 gr/m
AP052-208 AP052-212 AP052-219
991 gr/m 2045 gr/m 1442 gr/m
Sashes //
AP052-301 AP052-315 AP052-316 AP052-305 AP052-306 AP052-307
906 gr/m 904 gr/m 1109 gr/m 895 gr/m 1111 gr/m 1115 gr/m
1286 gr/m 1033 gr/m 1198 gr/m 1177 gr/m 1102 gr/m 982 gr/m 888 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
22/82
PROFILCO
Aluminium Systems //
22
Profiles for perimetric tilt and turn mechanism //
AP052-218 AP052-319 AP052-320 AP052-321 AP052-568
1042 gr/m 1136 gr/m
857 gr/m 983 gr/m 1175 gr/m
1410 gr/m 937 gr/m 1234 gr/m
Rebate for mullions //
793 gr/m 1073 gr/m 987 gr/m
PR52
Opening Systems
19
-
7/21/2019 PROFILCO Catalog Short Description 2014
23/82
Wall joining profile //
322 gr/m 345 gr/m 516 gr/m 472 gr/m 331 gr/m
AP052-570
345 gr/m
AC038-009
433 gr/m
AC038-010
730 gr/m
342 gr/m 332 gr/m
Additional profiles //
AP052-531
451 gr/m
AP052-541
336 gr/m
AP052-543
690 gr/m
AP052-523
254 gr/m
AP052-501
820 gr/m
Additional profiles //
10.3 28.7 10.8
AP052-507 AP052-510 AP052-565 AP052-561
PR52
Opening Systems
42
45.6
26.5
18
61.1
61.1
56.6 50.3
-
7/21/2019 PROFILCO Catalog Short Description 2014
24/82
PROFILCO
Aluminium Systems //
24
892 gr/m
1179 gr/m
410 gr/m
496 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
25/82
264 gr/m 617 gr/m 366 gr/m 269 gr/m 1118 gr/m 736 gr/m
15.9
AP052-524 AP052-539 AP052-540 AP052-920
340 gr/m 597 gr/m 340 gr/m 135 gr/m
Profiles for aller-retour // aller-retour
21
8.2
47.6
17
-
7/21/2019 PROFILCO Catalog Short Description 2014
26/82
PROFILCO
Aluminium Systems //
26
Glazing beads //
5 5 13.5
AP052-917 AP052-924 AP052-911 AP052-919 AP052-927 AP052-928
191 gr/m 222 gr/m 225 gr/m 248 gr/m 263 gr/m 260 gr/m
13.5
AP052-926 AP052-925 AP052-909 AP052-902 AP052-912 AP052-921
270 gr/m 266 gr/m 289 gr/m 306 gr/m 171 gr/m 227 gr/m
AP052-906
238 gr/m
AP052-916
290 gr/m
Profiles for panel //
1576 gr/m 520 gr/m
PR43 Opening Systems
Light system of Profilco for opening tilt and turn windows and doors constructions. Discreet design with smooth curveson the outer surface.
PROFILCO - , , , . .
21.8 21.8
9
21.8
12
21.8 21.8
15.5
21.8
21.8
18 20
21.8
24
21.8 21.8
28
20.8
18
20.8 20.8
23.5
-
7/21/2019 PROFILCO Catalog Short Description 2014
27/82
Basic features PR43
- Frame width 40 - 69 mm.
- Sash width 45 mm.
- Embraces double glazing 10 - 24 mm.
- It is a modern system with smooth lines, suitable forconstructions of modern aesthetic. Easy to assemblydue to its secondary profiles, offers many solutions inevery construction. Recomended only for small, orinterior constructions.
- The system has complete tightness to water and airdue to the 3 EPDM gaskets.
- A specially designed plastic plug ensures the outflowof the water in extreme windy conditions.
- It ensures perfect constructions with costminimization.
- The assembly can be accomplished easily with theuse of a gripping machine.
- Specials designed profiles for internal doors.
PR43
- 40 - 69 mm.
- 45 mm.
- 10 - 24 mm.
- . .
- PDM .
- .
- .
-
.
- .
23
-
7/21/2019 PROFILCO Catalog Short Description 2014
28/82
PROFILCO
Aluminium Systems //
28
Frames //
AP043-205
680 gr/m
AP043-204
628 gr/m
Frame for internal doors //
AP043-208
621 gr/m
Sashes //
gr/m 1063 gr/m
T-Profiles //
gr/m gr/m gr/m gr/m 735 gr/m
Rebate for mullions //
-
7/21/2019 PROFILCO Catalog Short Description 2014
29/82
AP043-402 AP043-407AP043-408AP043-509
790 gr/m 874gr/m 979gr/m 777gr/m
Additional profiles //
AP043-503
231gr/mAP043-512
501gr/m
PR40thermo Sliding Thermal Break Systems PR40 is a new thermal break system which is a result of collaboration with GIESSE and covers demands of lift slidingconstructions. The target of this collaboration is the creation of a thermal break lift sliding / sliding system for low budgetwaterproof constructions.
PROFILCO PR40 GIESSE . /
.
47.1
10.3
38.7
61.1
-
7/21/2019 PROFILCO Catalog Short Description 2014
30/82
PROFILCO
Aluminium Systems //
30
Basic features PR40thermo
- Lift sliding mechanism GOS of GIESSE for sash weight
200 or 80 kg with the use of the same profile
- Low height of drivers 40 mm
- Sash width 40 mm
- Thermal coefficient 3 w/m2 k.
- Reliable mechanism with low cost
- Plugs and damping stopper are designed fromGIESSE R&D Dept. ensuring high performance ofwaterproof and operation of sliding construction.
- Waterproof rubbers used in case of lift slidingconstructions or brushes in case of simple slidingconstructions.
- Multiple locking with striking plates which are flat withthe drivers
- Possibility of creating successive and inside-wall liftslidingas well assimple sliding constructions.
- Using the same aluminium profiles, constructor canmake lift sliding or simple sliding constructions. Thismeans,in the same place can be placed sliding and lift sliding
constructions with the same appearance but with
different operation.
PR40thermo- GOS GIESSE 200 80 kg .
- 40 mm.
- 40 mm ( 1,6mm).
- 3 w/m2 k.
- X .
- GIESSE .
- ( ) ( ).
- .
- .
-
.
.
25
Drivers //
AP040-201
1737 gr/m
AP040-203
1377 gr/m
AP040-204
2057 gr/m
AP040-202
980 gr/m
AP040-008
562 gr/m
Sashes //
1675 gr/m 1233 gr/m 1827 gr/m 1302 gr/m 777 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
31/82
Rebate for mullions // Adjoining profiles //
15.1
16.4 8.4
AP040-091 AP040-090 AP040-096 AP040-097 AP040-092 AP040-093
239 gr/m 271 gr/m 235 gr/m 627 gr/m 692 gr/m 206 gr/m
PR45 Sliding Thermal Break Systems Aesthetic and ergonomic windows can also contribute in buildings energy saving. This is the strategy followed by PR45
thermo sliding system having taken under consideration the recommendations of the constructors and the technologicaldemands of the existing specifications.
. PR45 .
AP040-501
741 gr/m
Additional profiles //
AP040-094
233 gr/m
50.6
50.2
-
7/21/2019 PROFILCO Catalog Short Description 2014
32/82
PROFILCO
Aluminium Systems //
32
Basic features PR45- Classical design with soft curves absolutely matchingwith PROFILCO systems design.
- Thermal isolation is achieved with the use ofpolyamide (16 mm wide) which interrupt thermal flow andnoise between the outer and inner side of the window.
- Sash width is 45mm and height 98 mm.
- Ability to embrace up to 32 mm glazing.
- Inside-wall driver height is 35 mm which is the sameas the height of the floor in order to avoid a step betweenthe floor and the driver.
- The width of the triple inside-wall driver is 139 mmwhich is appropriate for installation inside modern buildingwalls.
- The referential height of successive sliding driver is47mm.
- Ability to connect the profiles by using press corner
joint.
- Connection of profiles is avoided to be done at thethermal breaking points, meaning stronger connection andincreased thermal-break properties of the windows at thesame time.
- Sliding movement on additional driver (anodized orinox) for reduced friction and colour destruction.
- Easy sliding provided by big diameter rollers (29 mm)which can be replaced without disassembling the sash andcan be easily adjusted.
- Multiple locks for higher safety.
- Ergonomic design of the fly-screen sash handle.
PR45- , PROFILCO.
- (16 mm),
.
- 45 mm 98 mm.
- 32 mm.
- 35 mm .
- 139 mm .
- To 47mm.
- .
- .
- ( ) , .
- (29 mm) . .
- .
- .
27
-
7/21/2019 PROFILCO Catalog Short Description 2014
33/82
Drivers //
2186 gr/m 2762 gr/m 3289 gr/m
AP045-205
2128 gr/m
Sashes //
AP045-204
1730 gr/m
AP045-301
1534 gr/m
AP045-302
1613 gr/m
AP045-094
1280 gr/m
Rebate for mullions //
AP045-501 AP045-092
AP045-206
1676 gr/m
AP045-207
1186 gr/m
AP045-090
1215 gr/m
AP045-091
1020 gr/m
Additional profiles //
AP045-009530 gr/m
PR32thermo Sliding/Lift Thermal Break SlidingSystems
A
28
-
7/21/2019 PROFILCO Catalog Short Description 2014
34/82
PR
Aluminium Systems //
PROFILCO has developed a new sliding / lift sliding thermal break system, PR32 Thermo. The aim is the energyconservation with the market introduction of a reliable and affordable system. This system can be used as classic slidingsystem with brushes or like lift sliding system.Using EDPM gaskets achieving comparable properties with openingsystems.
PROFILCO, ,
PR32 Thermo. . EPDM .
Basic features PR32 thermo- Sash width 32 mm.
- Sash height 91,5 mm.
- Embraces double glazing 10-24mm.
- Thermal isolation is achieved with the use ofpolyamide (20 mm wide) which interrupt thermal flow andnoise between the outer and inner side of the window.
- The rolling of roller become on a specially designedanodized guide ensuring smooth rolling of the sash withminimal friction and no wear.
- The wheels of the rollers have large diameter foreasier rolling.
- The system can also use mechanism for lift-slidningwith maximum sash weight 180 Kg.
- Ideal for replacing inside the wall old windows anddoors of 150 and 700 series with triple driver width 98,5mm.
- Classical design with straight lines.
- Multiple locks for higher safety.
- The manufacturer can construct with the same
profiles either normal sliding or lift -sliding systems. This
means that in the same area can be fitted sliding and lift-
slidings structures with the same design but of course with
a different functionality.
PR32 thermo- 32mm.
- 91,5 mm.
- 10-24mm.
- (20 mm),
.
-
.
- .
- 180 Kg.
- 150 700 ,, 98,5mm.
- .
- .
- .
.
-
7/21/2019 PROFILCO Catalog Short Description 2014
35/82
29
Drivers //
AP320-201 AP320- 203 AP320-202 AP320-204
1501 gr/m 1674 gr/m 1562 gr/m 1129 gr/m
AP320-401
1584 gr/m
AP320-301 AP320-006 AP320-007
1378 gr/m 1044 gr/m 703 gr/m
AP320-205
gr/m
Sashes //
AP320-206
gr/m
AP320-207 AP320-208
gr/m1544 gr/m
T-Profiles //
-
7/21/2019 PROFILCO Catalog Short Description 2014
36/82
PR
Aluminium Systems //
Adjoining profiles //
14,1
AP320-013
350 gr/m
AP320-014
184 gr/m
Additional profiles //
5.9
AP320-004 AP320-005 AP320-501 AP320-022
156 gr/m 429 gr/m 745 gr/m 251 gr/m
PR40 Sliding / Lift Sliding SystemsA PR40 is a new system which is a result of collaboration with GIESSE and covers demands of lift sliding constructions.The target of this collaboration is the creation of lift sliding / sliding system for low budget waterproof constructions.
PROFILCO PR40 GIESSE . / .
11.7
36.4
12.6
30
-
7/21/2019 PROFILCO Catalog Short Description 2014
37/82
Basic features PR40
- Lift sliding mechanism GOS of GIESSE for sash weight
200 or 80 kg with the use of the same profile
- Low height of drivers 40 mm
- Sash width 40 mm
- Reliable mechanism with low cost
- Plugs and damping stopper are designed fromGIESSE R&D Dept. ensuring high performance ofwaterproof and operation of sliding construction.
- Waterproof rubbers used in case of lift slidingconstructions or brushes in case of simple slidingconstructions.
- Multiple locking with striking plates which are flat withthe drivers
- Possibility of two leaves, three leaves, four leaves orsix leaves lift sliding construction, as well as, successivesliding windows or simple sliding constructions.
- Using the same aluminium profiles, constructor canmake lift sliding or simple sliding constructions. Thismeans,in the same place can be placed sliding and lift sliding
constructions with the same appearance but with
different operation.
PR40- GOS GIESSE 200 80 kg
- 40 mm
- 40 mm ( 1,6mm)
- X
- GIESSE
- ( ) ( )
-
- , ,
.
-
.
.
31
Drivers //
AP040-070
1561 gr/m
AP040-071
1197 gr/m
AP040-074
1972 gr/m
AP040-073
771 gr/m
AP040-075
1877 gr/m
AP040-072
2210 gr/m
Sashes // Rebate for mullions //
Adjoining profiles
//
AP040-
095AP040-094
233 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
38/82
PR
Aluminium Systems //
Additional profiles //
15.1
AP040-091 AP040-092 AP040-097 AP040-093
239 gr/m 692 gr/m 627 gr/m 206 gr/m
PR35 Sliding Systems Ideal for applications with great demands. Sliding system for windows, doors and big-dimension constructions with
classic design and soft straight and lightly curved lines.
. ,
, , .
32
-
7/21/2019 PROFILCO Catalog Short Description 2014
39/82
Basic features PR35
- Width of the leaf 35 mm.
- Embraces double glazing 10 - 22 mm.
- The system is sliding on an additional driver (anodizedor inox) for smooth movement, avoiding friction and colourdamaging of the driver.
- It can accommodate locks of multiple locking pointsfrom 2 up to 6 points, which ensures the complete safetyof the system. The lock is easily installed in the sashchamber. The locking mushrooms are made fromstainless steel and are easily adjusted in the channel ofthe frame.
- Large diameter rollers (29 mm), in order to provide aneasy sliding. Furthermore, they can be replaced withoutdisassembling the sash.
- The tower driver is supported on the centre, in orderto prevent deflection in big and heavy constructions.
- The assembly of the driver is accomplished with theuse of an alignment corner and screws, which simplifiesthe construction.
- Bigger sash corner joint for more robust construction.
- Thicker aluminium profiles, where it is appropriate, forheavy constructions.
- 123 mm wide driver ideal for replacement of old win-dows.
- The flyscreen profile is designed in such a way which
can be used as an aesthetically nice handgrip.
PR35- 35 mm
- 10 - 22 mm
- ( ) , .
- 2-6 . , , . .
- (29mm), . .
- , .
-
, .
- .
- .
- 123 mm .
- .
33
-
7/21/2019 PROFILCO Catalog Short Description 2014
40/82
PR35 Sliding Systems
Drivers //
AP035-205
1687 gr/m
AP035-206
730 gr/m
AP035-207
581 gr/m
AP035-208
1733 gr/m
AP035-209
1303 gr/m
AP035-210
1685 gr/m
AP035-211
1178 gr/m
AP035-212
1496 gr/m
AP035-213
1200 gr/m
Sashes //
AP035-214
1104 gr/m
AP035-301
1103 gr/m
AP035-302
1030 gr/m
AP035-303
1087 gr/m
AP035-304
935 gr/m
AP035-
306
1108 gr/m
T-Profiles // Adjoining profiles //
34
-
7/21/2019 PROFILCO Catalog Short Description 2014
41/82
PROFILCO
Aluminium Systems //
41
AP035-505 AP035-506 AP035-511
195 gr/m 558 gr/m 192 gr/m
AP035-401 AP035-402
889 gr/m 827 gr/m
Additional profiles //
8.5 14
AP035-501 AP035-502 AP035-504 AP035-507 AP035-509 AP035-510
124 gr/m 418 gr/m 89 gr/m 220 gr/m 233 gr/m 699 gr/m
8.5
AP035-512
474 gr/m
AP035-513
433 gr/m
AP035-514
174 gr/m
AP035-515
512 gr/m
AP035-517
82 gr/m
AP035-518 AP035-519
627 gr/m 326 gr/m
PR32
Sliding SystemsSliding system for constructing windows and doors in normal apertures. Easy assembly, multi locking for greatersafety.
, . ,
.
10.9
46.6
39.8
20.2
5.9
34.8
25.8
18.5
8.2
25.6
49.1
25
18
24.8
15.7
-
7/21/2019 PROFILCO Catalog Short Description 2014
42/82
42
Basic features PR32
- Width of the leaf 32 mm
- Embraces double glazing 10 - 22 mm.
- Design with smooth curves which arecompletely har-monized with the lines of Profilco.
- Multiple locking points for greater safety
- Profiles with 45 90 cnt
- Can be easily assembled.
- Special design in order to offercomplete static endur-ance to the constructionswith lower cost.
- Usage of one triple or double driver forevery con-struction.
- Excellent design of the flyscreen profile
in order to be by itself an aesthetic grip.
PR32
- 32 mm
- 10 - 22 mm
- , RPOFILCO.
- K 45 90
-
.
-
.
- , .
- .
- .
Drivers //
983 gr/m 1298 gr/m 576 gr/m 457 gr/m 978 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
43/82
PROFILCO
Aluminium Systems //
43
12
AP032-209 AP032-208
1051 gr/m 698 gr/m
Straight cut Sashes //
AP032-
304
AP032-305 AP032-306
AP032-307
PR26 Sliding Systems
Light sliding system for small and medium size windows. Great attention is given to the profiles weight withoutcompromising the quality of the product and functional outcome. PR26 can be combined with the opening PR52 systemoffering solutions for complexional sliding and opening constructions.
AP032-211
845 gr/m
AP032-210
649 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
44/82
44
. . PR26 PR52 .
Basic features PR26
- 28 mm sash width
- Embraces double glazing 10 - 22 mm.
- Can be easily assembled
PR26
- 28 mm
- 10 - 22 mm
- .
Drivers //
52
34.8
39.1
34.8
28.2
34.8
69
34.8
39.1
34.8
-
7/21/2019 PROFILCO Catalog Short Description 2014
45/82
PROFILCO
Aluminium Systems //
45
AP026-201
737 gr/m
AP026-202
519 gr/m
AP026-203
292 gr/m
AP026-204
961 gr/m
AP026-205
599 gr/m
1164 gr/m 752 gr/m
Sashes //
AP026-303
288 gr/m
AP026-305
752 gr/m
AP026-306
801 gr/m
AP026-307
815 gr/m
AP032-307
531 gr/m
T-Profiles // Adjoining profiles //
AP026-403AP026-507
751 gr/m192 gr/m
Additional profiles //
PR50Curtain Wall systems(standard)Complete curtain-wall system for covering external building surfaces, large windows, glass roofs, pyramids and winter
gardens.AP026-504
gr/m
AP026-505
gr/m
AP026-508
gr/m
13.8
24.5
-
7/21/2019 PROFILCO Catalog Short Description 2014
46/82
46
, , , ,
.
Basic features PR50- Many types of external cover with round, oval,traditional, semi structural and structural providesolutions in every architectural requirement.
- The width of the mullion is 50 mm in order tooffer better brightness in space.
- Embraces double glazing 10 - 32 mm.
- Big variety of mullions and transoms cansatisfy statically all the architectural requirements.
- The connection between the transoms and themullions is achived by overlapping which ensures theflow of water to the exterior of the building.
- Transoms can be connected at the externaland internal side of the building.
- Polyamides of 14 mm 20 mm and 26 mmensure the most excellent heat insulation anddecrease the functional heating and cooling expenses
of building.
- Special designed drainage plugs installed atthe connec-tion points of the mullions, as well as theuse of butyl tape and EPDM gaskets, ensure thecomplete tightness of the system.
- Special constructions like roofs, atriums,pyramids are made without welding fast and easily withspecial profiles and the systems special joints.
- Hexahedron, octahedron pyramids etc. In
various sizes are constructed without welding, easy
and fast with the use of special profiles and connecting
joints.
standard
PR50-
, , , ,semistructural structural, .
- 50 mm .
- 10 - 32 mm.
- .
- .
- .
- 14 mm, 20 mm 26 mm , .
- , EPDM , .
- , , .
-
7/21/2019 PROFILCO Catalog Short Description 2014
47/82
PROFILCO
Aluminium Systems //
47
- , .
,
.
Mullions //
AP050-101
2110 gr/m
AP050-102
2443 gr/m
AP050-116
2865 gr/m
AP050-117
3225 gr/m
AP050-111
4263 gr/m
AP050-105
1703 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
48/82
48
AP050-106 AP050-107 AP050-109 AP050-110 AP050-112 AP050-1131239 gr/m 3255 gr/m 2458 gr/m 924 gr/m 944 gr/m 891 gr/m
PR50Curtain Wall systems(standard)
Transoms //
1190 gr/m 1587 gr/m 1902 gr/m 2087 gr/m 2313 gr/m 2540 gr/m 2994 gr/m
AP050-202 AP050-204 AP050-203 AP050-205 AP050-206
681 gr/m 770 gr/m 1190 gr/m 1439 gr/m 1477 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
49/82
PROFILCO
Aluminium Systems //
49
Pressure plates //
AP050-303 AP050-318 AP050-311 AP050-314 AP050-316
457 gr/m 422 gr/m 980 gr/m 1069 gr/m 794 gr/m
Face caps //
310gr/m 287gr/m 480 gr/m 630 gr/m 933 gr/m 1314 gr/m 1980 gr/m
AP050-310 AP050-312 AP050-315 AP050-317
282 gr/m 547 gr/m 615 gr/m 429 gr/m
Joints //
1675 gr/m 2160 gr/m 2455 gr/m 2763 gr/m 3588 gr/m 1487 gr/m
PR50Curtain Wall systems
57.7
12
-
7/21/2019 PROFILCO Catalog Short Description 2014
50/82
50
(standard)
Joints //
AP050-406
7804 gr/m
AP050-407
2290 gr/m
AP050-408
4851 gr/m
AP050-412
1458 gr/m
AP050-413
382 gr/m
AP050-510
296 gr/m
AP050-501
262 gr/m
AP050-502
249 gr/m
AP050-503
235gr/m
AP050-504
197 gr/m
AP050-507
105 gr/m
Profile for top hung opening window //
AP050-601 AP055-901 AP055-902
1338 gr/m 1382 gr/m 1607 gr/m
44.4
100
7
40.8
-
7/21/2019 PROFILCO Catalog Short Description 2014
51/82
PROFILCO
Aluminium Systems //
AC113-006
gr/m
AC113-008
gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
52/82
52
Sun shades //
PR50Curtain Wall systems
(Semi Structural)Semi Structural curtain wall system for covering external building surfaces.
, semi-
structural .
45
-
7/21/2019 PROFILCO Catalog Short Description 2014
53/82
PROFILCO
Aluminium Systems //
53
Basic features PR50 Semi Structural
- Use of the same profile for the constructionof the prefabricated unit for the fixed window andalso for the top hung outward opening window whichresults to the uniformity of the internal and externalview. Additional advantage of transforming a fixedwindow to top hung outward window and theopposite even after the construction of the curtainwall.
- Three profiles for the construction of theprefabricated units, normal, thermal break with 16
mm polyamide and thermal break with 24 mmpolyamide.
- Can embrace double glazing 24 mm up to
40 mm.
- Perimetric locking of the prefabricated unitwith the use of special designed joints.
- The joints that support the prefabricatedunit are de-signed in order that the weight of thewindow assists to the compression of EPDMgaskets which results to the total waterproof of theconstruction.
- Ability of perimetric locking for the top hungoutward opening window.
- Movement ability of the prefabricated unit
5 mm with-out the possibility of unhooking of the unitin case of an earthquake.
- Aluminium profile for the glazing support sothat the weight of the glass does not bend the profilefor the prefabricated unit.
- Complete waterproof is achieved by usingthree EPDM gaskets.
- Use of the same mullions and transoms in
standard and structural curtain wall system for
minimum wastage.
Semi Structural
PR50
- . .
- , , 16 mm, 24 mm.
- 24 40 mm.
- .
- EPDM .
- .
- 5 mm .
- .
- EPDM .
-
standard structural
.
-
7/21/2019 PROFILCO Catalog Short Description 2014
54/82
54
AP050-603
999 gr/m
AP055-904
1380 gr/m
AP063-904
1454 gr/m
Additional profiles //
AP050-508
284 gr/m
AP050-509
365 gr/m
Mullions // Transoms // AP050-114 AP050-115
2669 gr/m 3160 gr/m
Sashes //
AP050-210
1889 gr/m
36
21
-
7/21/2019 PROFILCO Catalog Short Description 2014
55/82
PROFILCO
Aluminium Systems //
55
PR50 Curtain Wall systems
(Structural)
Profilco PR50 Structural is an Aluminium-Glass structural curtain-wall system with no visible aluminium surfaces at theexternal side (glass canvasses only visible). The structure is a normal curtain-wall system with mullion and transomprofiles equipped with water drainage channels which drive the condense humidity away from the structure.
PR50 structural structural - (). , PR50 , .
-
7/21/2019 PROFILCO Catalog Short Description 2014
56/82
Basic features PR50 Structural- The width of the mullion is 50 mm in order to offer betterbrightness in space.
- Big variety of mullions and transoms can satisfy staticallyall the architectural requirements
- The connection between the transoms and the mullionsis achieved by overlapping which ensures the flow of water tothe exterior of the building.
- Glazing width 30 - 32 mm.
- Transoms can be connected at the external and internalside of the building.
- Reduced weight of the construction therefore reducedcost due to the glazing support which is installed to the curtainwall.
- Polyamide 10 mm and 16 mm, ensure the most excel-lent heat insulation and decrease the functional expenses ofbuilding.
- Decorative gap 18 mm between the glasses.
- Non use of prefabricated canvas in order to have greaterlightness and internal uniformity.
- It can be combined with top hung outward opening win-dows in order to have symmetry vertically and horizontally.
- The complete waterproof is achieved with EPDMgaskets and waterproof DOW CORNING silicone.
- Structural PR50 comes with all required high quality ac-
cessories, according to the international specifications.
Structural
PR50- 50 mm .
- .
- .
- 30 - 32 mm.
- .
- .
- 10 mm 16 mm, .
- 18 mm .
- , .
- .
- EPDM DOWCORNING.
- PR50 structural
,
.48
Profile for top hung opening window //
AP050-602 AP050-650
1349 gr/m 1521 gr/m
Additional profiles //
AP055-903
1637 gr/m
AP050-505 AP050-506 AA050-701 AA050-702 AP050-703
179 gr/m 182 gr/m 214 gr/m 186 gr/m 311 gr/m
22.1
6.3
20.3
15.2
8
17
24.6
11.7
-
7/21/2019 PROFILCO Catalog Short Description 2014
57/82
PROFILCO
Aluminium Systems //
57
PR16 Rails - Fences -
PROFILCO presents the new system for glass rails and fences.
110mm, .
-
7/21/2019 PROFILCO Catalog Short Description 2014
58/82
Basic features rails- Can embrace glazing 16 mm.
- Rail height up to 950 mm.
- Base rail height 110 mm.
Basic features fences- fence in horizontal provision.
- Rabote of 110 mm.
- Distance between base mullion 1 m.
- 16 mm.
- 950 mm.
- 110 mm.
- .
- 110 mm.
- 1m.
50
Profiles for rails //
AP016-201 AP016-202
519 gr/m 376 gr/m
AA016-401 AA292-003 AA016-402
Profiles for fence //
AC286-004
958 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
59/82
PROFILCO
Aluminium Systems //
59
PR48 Folding Doors
PR48 is a new system for folding doors which follows the basic PROFILCOs design providing high ergonomic solutions.It is ideal for covering large apertures in hotels, houses and entertainment places.
PR48 PROFILCO PROFILCO . , , .
-
7/21/2019 PROFILCO Catalog Short Description 2014
60/82
60
Basic features PR48- The sliding movement of thesashes is achieved by a special designed4roller internal mechanism for perfect andsilent function.
- Two weather gaskets whichprovide maximum resistance to badweather conditions.
- Easy assembly which gives greatflexibility to the constructor. A bigadvantage of PR48 is the construction ofodd or even, left or right, inwards oroutwards opening sashes which cover allarchitectural demands.
- With the use of a single corniceprofile which covers any imperfection of theopening and with the use of two specialadjustable regulators, the construction canbe perfectly leveled
- Ability to embrace up to 30 mm
glazing.
- The profiles are machined at the
AT038-102
punch machine which is the same for all
PROFILCOs series.
PR48- 4 .
- PR48 2 .
- . PR48 , , , .
- - .
- PR48 30 mm.
-
038-102
PROFILCO.
Drivers //
AP048-201
1677 gr/m
Frames //
AP048-401
763 gr/m
AP048-402
600 gr/m
AP048-202
921 gr/m
Sashes //
AP048-203
686 gr/m
54.1
21.7
-
7/21/2019 PROFILCO Catalog Short Description 2014
61/82
PROFILCO
Aluminium Systems //
61
AP048-301
933 gr/m
AP048-302
1034 gr/m
AP048-303
897 gr/m
Additional profiles //
7.8
AP048-501 AP048-502 AP048-504 AP048-503
187 gr/m 746 gr/m 254 gr/m 194 gr/m
PR44PartitionsSystem for internal office partitions which can be combined with glass and wooden surfaces to create luxurious look withlow cost.
.
37.4
20.6
18.9
-
7/21/2019 PROFILCO Catalog Short Description 2014
62/82
62
Basic features PR44
- 72mm active width.
- Coplanar surface design.
- Simple in construction andassembling.
- Ability to create complexional andmultiform structures with the use of simplematerials.
- Ability to embrace 4 and 5 mm glassas well as melamine panels.
- 55 mm internal space betweenglasses ready to encase adjustable blindswith hidden mechanism
- Specially designed profile able tocarry electrical or other network cables and
plugs internally.
- Can be combined with PR52PROFILCO series through a specialdesigned frame profile for constructingopenings in partitions.
- No special tools or complextreatment required during construction.
- Almost entirely manufactured at the
place were it will be installed.
PR44
- 72 mm.
- .
-
- .
- 4 5 mm .
- 55mm - .
- , .
- PR52 PROFILCO .
- .
-
.
Basic profiles //
AP044-201 AP044-203 AP044-202
882 gr/m 873 gr/m 2681 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
63/82
PROFILCO
Aluminium Systems //
63
AP044-401 AP044-402 AP044-403
-
7/21/2019 PROFILCO Catalog Short Description 2014
64/82
64
Frames - Drivers //
-
AP044-301
961 gr/m
AP044-302
858 gr/m
AP044-303
957 gr/m
Face caps //
AP044-501
331 gr/m
AP044-504
348 gr/m
AP044-502
235 gr/m
AP044-503
832 gr/m
AP044-404
745 gr/m
Mullions //
PR20 Photovoltaic support bases PROFILCO SA presents the new system PR20 for support photovoltaic panels for rooftops, terraces and parks. This system is manufactured
entirely of aluminum and all connections between the pieces made of aluminum with stainless steel screws. The aluminum is available in M/F,
painted or anodized. The anodizing ensures the best possible corrosion protection to the bases so as to safely carry the loads strainthroughout
entire life.
H PROFILCO , .
.
, , .
.
gr/m gr/m gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
65/82
PROFILCO
Aluminium Systems //
65
Rooftops and terraces profil // -
AP020-001 AP020-002
AP020-003
967 gr/m 1156 gr/m 1156 gr/m 1467 gr/m 2464 gr/m
AC255-002 AC255-001 AP020-004 AP010-022
659 gr/m 504 gr/m 457 gr/m 1521 gr/m
19.4
25.7
17
42.2
34.2
8.9
60
40
3
58.5
47
-
7/21/2019 PROFILCO Catalog Short Description 2014
66/82
PROFILCO
Aluminium Systems //
Parks profil //
AC272-001 AC272-024
4766 gr/m 6076 gr/m 4571 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
67/82
2500 gr/m 1729 gr/m
1636 gr/m 1112 gr/m 777 gr/m 709 gr/m 874 gr/m 2825 gr/m
AC272-026 AC272-016 AC272-015
57
Photovoltaic support bases
PR20
-
7/21/2019 PROFILCO Catalog Short Description 2014
68/82
AC272-037
1563 gr/m
AC272-038
5522 gr/m
AC272-039
2080 gr/m
AC272-030
421 gr/m
AC272-035
900 gr/m
58
AC14 Mosquito net profiles System designed for single or double leaf opening mosquito nets. The mosquito nets closes with special designed ale retour hinges and
insured with a magnet inside the profile.
38
10
56.4
30
-
7/21/2019 PROFILCO Catalog Short Description 2014
69/82
.
.
Profiles for opening mosquito net //
15.9
AC014-105 AC014-106 AC014-107 AC014-113
423 gr/m 496 gr/m 502 gr/m 977 gr/m
Profiles for fixed mosquito net //
12.2
AP026-303
288 gr/m
59
-
7/21/2019 PROFILCO Catalog Short Description 2014
70/82
70
PR18 Panel profiles
Aluminum system for hanging frames from aluminum composite panel suitable for building facades. The system is entirely made of aluminumto avoid corrosion and to ensure a simply installation. The panels configuration realized by use of a special press.
(Aluminium composite panels) .
.
.
Profiles for composite panel //
AC018-003
1287 gr/m
AC018-002
1381 gr/m
PR14Rolling shutters
46.5
40.5
39
48.5
-
7/21/2019 PROFILCO Catalog Short Description 2014
71/82
Surjective rolling shutters system with flat classic surfaces.
.
Box // 61
PR14
- :185185,185155155 155mm.
---.
-14-305 185 1852,70 m.
-
.
-.
Basic features PR44
-Includes three different box dimensions:185X185, 185X155 and 155X155 mm.
-Special designed aluminium leaves ensuringsilent function and durability of shutters.
-Large apertures coverage by using leaf 14-305which if used in 185X185 box, provides maximumheight of shutter 2.70 meters.
-Driver pro files assembled without machiningprocess.
-Special designed cover pro file for easyunbuckling.
-
7/21/2019 PROFILCO Catalog Short Description 2014
72/82
PROFILCO
Aluminium Systems //
72
KOYTI 155x155 KOYTI 185x155
3333 gr/m 3256 gr/m
AP014-202 AP014-206
AP014- 201AP014-201 630 gr/m
630 gr/m
155AP014-204 155AP014-204
876 gr/m876 gr/m
AP014-203 KOYTI 185x185 AP014-207
849 gr/m821 gr/m
AP014-
205
185 735 gr/mAP014-208
908 gr/m
9.9
10.6
8.6
Fixed louver // Threshold //
AP014-303 AP014-305
294 gr/m 266 gr/m
Drivers //
AP014-306
304 gr/m
AP014-302
463 gr/m
155 185
-
7/21/2019 PROFILCO Catalog Short Description 2014
73/82
AP014-403 AP014-404 AC020-016
469 gr/m 794 gr/m 858 gr/m
PR17 PolycarbonateWith the Quick fix system used for linking polycarbonate leaves together with the use of aluminium profilesas wellas with the PR50 system, Profilco gives the ability to construct a limitless number of applications. The accurate functionis achieved by using a series of special designed profiles.
PROFILCO Quick Fix,
, PR50 . .
-
7/21/2019 PROFILCO Catalog Short Description 2014
74/82
PROFILCO
Aluminium Systems //
74
Applications of PR17- External: All type depots, covered corridors,pergolas, bus stops, stadium covers, illustrationpyramids and domes, soundproof panels thermalvitrification, swimming pool ceiling, louvers,greenhouses, labels, industrial windows, atriums,open markets.
- Internal: Bulkheads, showers, furred ceilings,signs and advertising structures. The Quick Fixsystem:Polycarbonate leaves are braced on aluminium
profiles, steel tubes, or directly on concrete, offering a
great suppleness. The restrain slate can be combined
with a large number of flat, oval and curved decorative
covers for all architectural aspects. By using gaskets
and special adhesive tapes, high waterproofing is
achieved fast and reliably.
PR17- : , , , , , , , , , , ,, ,, .
- : ,
, , ,
. To Quick Fix
, ,
.
,,
.
. 63
Pressure plate //
AP017-051
328 gr/m
Profiles for quick fix // quick fix
AP017-052 AP017-053
633 gr/m 380 gr/m
Additional profiles //
20
20.2
19.9
13.9
15
24 21 16.8 10.5
-
7/21/2019 PROFILCO Catalog Short Description 2014
75/82
AP017-054
207 gr/m
AP017-055
192 gr/m
AP017-056
140 gr/m
PR10 UniversalFixed Louver //
AP010-300 AP010-304 AP010-301 AP010-303 AP010-306
AP010-308
597 gr/m 708 gr/m 449 gr/m 488 gr/m 466 gr/m 824
gr/m
AP010-309
123 gr/m
8.5 22.4
4.6
AP010-302 AP052-527 AP052-530 AP052-528 AP010-310 AP010-311
349 gr/m 857 gr/m 1001 gr/m 439 gr/m 461 gr/m 535 gr/m
Blades //
AP010-503
108 gr/m
AP010-502
242 gr/m
AP010-501
323 gr/m
T - Profiles // T -
AP010-201
156 gr/m
AP010-202
196 gr/m
65
50
10
57.5
12
30
3
40
32
20
20
20
1.5
25
25
1.5
-
7/21/2019 PROFILCO Catalog Short Description 2014
76/82
PROFILCO
Aluminium Systems //
76
Square tube //
300 gr/m 421 gr/m 491 gr/m 624 gr/m 888 gr/m 1845 gr/m 1520 gr/m
Rectangular tube //
AP010-026 AP010-006 AP010-019 AP010-022
AP010-
027
947 gr/m 1109 gr/m 1271 gr/m 1577 gr/m
Round tube //
AP010-050 AP010-056 AP010-051 AP010-052 AP010-055 AP010-053 AP052-510
226 gr/m 223 gr/m 221 gr/m 178 gr/m 204 gr/m 299 gr/m 617 gr/m
16.6
1.8
20
1.4
25
1.5
19
1.5
-
7/21/2019 PROFILCO Catalog Short Description 2014
77/82
1.5 1.4
AC162-001 AC162-002 AP010-402 AC178-001 AC260-003 AC059-002
345 gr/m 330 gr/m 451 gr/m 343 gr/m 300 gr/m 1323 gr/m
AC020-019 AP010-100 AP010-
101 AP010-102 AP010-103
1055 gr/m
Corners //
115 gr/m 156 gr/m 196 gr/m 237 gr/m 318 gr/m 624 gr/m
67
PR10Universal
28 35
1.2
AP010-111AP010-104
40
40
40
40
1.5 3
15
15
20
20
25
25
30
301.5
1.51.5 1.5
-
7/21/2019 PROFILCO Catalog Short Description 2014
78/82
PROFILCO
Aluminium Systems //
78
AP010-113 AP010-107359 gr/m AP010-114 AP010-110399 gr/m AP010-112
1145 gr/m358 gr/m
500 gr/m
AP010-119
743 gr/m
- Profiles // -
CODE
WEIGHT
"" "C"
AP052-552 583 gr/m 90 mm 55.3 mm
AP052-553 662 gr/m 110 mm 55.9 mm
AP052-555 900 gr/m 150 mm 78.1 mm
AP052-557 1157gr/m 180 mm 80.7 mm
AP052-559 1445gr/m 210 mm 83.4 mm
AP052-560 1526gr/m 230 mm 66.2 mm
Profiles for plaster //
AP010-915 AC093-002
906 gr/m 678 gr/m
PR10Universal
B
160
25
105.5
28.9
17
97.5
-
7/21/2019 PROFILCO Catalog Short Description 2014
79/82
Profiles for advertisment signs //
AP010-401
2074 gr/m
AC092-001
1290 gr/m
AC092-002
3281 gr/m
AC092-004
1637 gr/m
69
Varius Profiles //
AC085-001 AC096-002 AC214-001 AC075-001 AC075-002 AC217-002
-
7/21/2019 PROFILCO Catalog Short Description 2014
80/82
PROFILCO
Aluminium Systems //
80
473 gr/m 474 gr/m 387 gr/m 1310 gr/m 1102 gr/m 342 gr/m
672 gr/m 466 gr/m 961 gr/m 1318 gr/m 647 gr/m 310 gr/m 1476 gr/m
-
7/21/2019 PROFILCO Catalog Short Description 2014
81/82
-
7/21/2019 PROFILCO Catalog Short Description 2014
82/82