Professional Handoff for 3G , 4G ,HSPA+ Professional Handoff for 3G , 4G ,HSPA+ and LTE Cell Systemsand LTE Cell Systems

City Wi-Fi

2.4Ghz 300Mbps Wi-Fi in 2.4Ghz 300Mbps Wi-Fi in MIMOMIMO

XLINK-A300N Mobile IP City Wi-Fi System AP rated 300Mbps

2x2 MIMO, 802.11N/A/G/B2x2 MIMO, dual-radio, 5GHz/2.4GHz outdoor long range up to 20Km5GHz Bridge 802.11N/A 300Mbps2.4GHz AP 802.11N/G/B 300MbpsTotal 4x antenna ports; Bridge and AP each 2 antenna portsIP68 rated enclosure, true weather-proof, -35c ~ 75cBuilt-in lightning protection circuitsLOS 20Km and NLOS 2-4Km with increased ranges on Laptops and Ipads etc 300-500M using MIMO technologyMIMO is an important part of modern wireless communication standards such as IEEE 802.11n (Wi-Fi), 4G, 3GPP Long Term Evolution LTD, Wi-MAX and HSPA+.

Applications• The application we see today is a step up improvement from MESH

to MIMO in large citys or areas with high density requirements. By using MIMO in 2.4Ghz N which is 1 Tx and 1 Rx antenna and radio per unit Tx , Rx we now mirror the cellular designs,

• The idea setup is 500 meters so i-phones, i-Pads with Wi-Fi can hand off and use the system.

• There are several hundred voip apps for i-phones, Blackberry also which allow the client to use an alternative VOIP service with Wi-Fi.

• The speeds that can be sold are 10,15,20,25 Mbps for example using N and the connection speed depends on the device distance and NLOS , many will use USB dongles with USB extensions or our XOU2410NBG 1 watt 4Km NLOS 10Km LOS USB device

Typical Layout

AMU-24005G c/w internal antenna 7km 802.11b,g 54Mbps

AMU-24005G SMA use 16dbi Yagi 12km 802.11b,g 54Mbps

AMU-2405G (500mw)SMA use 16dbi Yagi 20km 802.11b,g 54Mbps

USB - XOU-2410 (6000mw) 802.11,b,g,n 150Mbps 4Km NLOS and 10Km LOS

$89 down to $49 USD in Quantity

150Mbps

300 Meters

XLINK-A300N 300Mbps

Many Optional MIMO Antennas

• MIMO - In radio, multiple-input and multiple-output, or MIMO (commonly pronounced my-moh or me-moh), is the use of multiple antennas at both the transmitter and receiver to improve communication performance. It is one of several forms of smart antenna technology. Note that the terms in-put and output refer to the radio channel carrying the signal, not to the devices having antennas.

• MIMO technology has attracted attention in wireless communications, because it offers significant increases in data throughput and link range NLOS without additional bandwidth or transmit power. It achieves this by higher spectral efficiency (more bits per second per hertz of bandwidth) and link reliability or diversity (reduced fading). Because of these properties it works same as a cell service.

• MIMO is an important part of modern wireless communication standards such as IEEE 802.11n (Wifi), 4G, 3GPP Long Term Evolution, WiMAX and HSPA+.