Professional Fall Prevention and Protection...
Transcript of Professional Fall Prevention and Protection...
Date: June 5 & 6
Time: 8:00 a.m. - 5:00 p.m.
Course Length: 16 hours
Cost: $825 per person
Location: Broner Safety 1750 Harmon Auburn Hills, MI 48326
Professional Fall Prevention and Protection Training
Open Enrollment Program: Competent Person I Training
2012
800/873-5242www.millerfallprotection.com
Ask the Safety at Height Expert ... Ask Miller.▼
Competent Person I Training
Program Topics■ Overview of Fall Prevention and Protection ■ The Need for Fall Protection■ Hazard Analysis • Recognition of hazards • Evaluation criteria • Control measures
■ Fall Prevention vs. Protection■ General Principles of Fall Protection • Fall clearance calculations • Total fall distance calculations • Minimizing fall forces (live demonstrations)
■ Fall Protection on Aerial Lifts and Ladders
This two-day, intermediate-level course is designed for facility and site supervisors who must also serve as the competent person required by OSHA 1926.32(f), 1926.500 and 1910 standards, as well as Canadian provincial standards.
Participants are assigned tasks which require evaluation for fall hazards. The tasks are described using real-life site photos.
The training provides more detailed coverage of the Fall Prevention and Protection Supervisor Training course materials and the program topics listed below.
The course also supplies the participant with the knowledge and skills to perform the annual inspection and recordkeeping.
■ Experienced instructors ■ Live demonstrations and
hands-on training ■ Addresses site-specific
variables and performance requirements of fall prevention and protection
■ Certificate and wallet card issued: valid for 3 years
To register contact Miller Fall Prevention and Protection Training at:
888.232.7585or register online at:
www.millerfalltraining.com
■ Rescue • Fall victim • First on the scene • Self-rescue and assisted self-rescue
■ Personal Fall Arrest Systems (Hands-on exercises) • Inspection procedures • Donning procedures • Fit test • Selection, application and care of equipment
■ Fall Hazard Task Evaluation (Exercise requiring hazard analysis)■ Subpart M (Exercise)■ Competent Person Inspection (Hands-on Practicum)
This course hosted by: