Professional cleaning equipment - bulengineering.combulengineering.com/img/OBIAVI/Nilfisk...

Professional cleaning equipment

INDUSTRIAL VACUUM CLEANER ACCESSORIES 2005/2006

Note: photos used in this brochure represent a group of products.

Specifications and details are subject to change without prior notice.

SERVICE KITS ............................................................................................ 3

CLEANING KITS ......................................................................................... 5

DUST BAGS............................................................................................... 6

HOSES ...................................................................................................... 8

TUBES....................................................................................................... 14

REDUCERS ................................................................................................ 15

NOZZLES ................................................................................................... 16

FILTERS ..................................................................................................... 22

NOTES ...................................................................................................... 27

CONTENT

2

KIT CONTAINER INOX

CONTAINER INOX IV 022/040 32400153CONTAINER INOX IV 055 32400518CONTAINER INOX IV 075-150 32400522

KIT DUST SAFE BAG

SAFE BAG SYSTEM IV 022/IV 040 32400151SAFE BAG SYSTEM IV 055 32400516SAFE BAG SYSTEM IV 075-150 32400521SAFE BAG SYSTEM IVT 2000B 32400595 SAFE BAG SYSTEM IVT/IVB 2000S 32400596 SAFE BAG SYSTEM IVT 3000B 32400597SAFE BAG SYSTEM IVT/IVB 3000S 32400598 SAFE BAG SYSTEM IV 150 32400814

KIT PLASTIC BAG

PLASTIC BAG SYSTEM IV 040 32400152PLASTIC BAG IV 055-IV 150 32400517PLASTIC BAG IV 150 32400813PLASTIC BAG IVT/IVB 2000S 32400612PLASTIC BAG IVT/IVB 3000S 32400613

KIT DUST BAG

KIT DUST BAG SYSTEM IV 022/IV 040 32400150KIT DUST BAG SYSTEM IV 055 32400515KIT DUST BAG SYSTEM IV 150 32400813DUST BAG IVT/IVB 2000S 32400603

KIT LIQUID

KIT LIQUID IV 022/040 32400154KIT LIQUID (230V) IVB 2000S 32400616KIT LIQUID (110V) IVB 2000S 32400640KIT LIQUID (230V) IVB 3000S 32400617KIT LIQUID (110V) IVB 3000S 32400641

DESCRIPTION MODELS REF. NO.

3

Cleaning is an essential job that often gets left undone. That’s usually

because nobody likes to use the wrong equipment. Our industrial

vacuums are designed to be easy and practical to use, to move and to

store afterwards.

A range of accessory options is available to take the hassle out of

cleaning.

SERVICE KITS

KIT CLASS H

KIT CLASS H IV 022/040 32400157KIT CLASS H IV 055-110 32400524KIT CLASS H IV 150 32400526KIT CLASS H IVT 2000B 32400599KIT CLASS H IVT/IVB 2000S 32400600 KIT CLASS H IVT/IVB 3000S/B 32400601

SERVICE KITS


KIT CLASS M

KIT CLASS M IV 022/IV 040 32400156KIT CLASS M IV 055-110 32400523KIT CLASS M IV 150 32400525KIT CLASS M IVT 2000B 32400591 KIT CLASS M IVT/IVB 2000S 32400592 KIT CLASS M IVT 3000B 32400593KIT CLASS M IVT/IVB 3000S 32400594

KIT CONTAINER ABS

KIT CONTAINER ABS IV 022/040 32400159IVT/IVB 2000S/B

KIT ASBESTOS

KIT ASBESTOS IV 022/040 32400158KIT ASBESTOS IV 055 32400519KIT ASBESTOS IVB 2000S 32400614KIT ASBESTOS IVB 3000S 32400615

KIT CARTRIDGE

KIT CARTRIDGE IV 022/040 32400155KIT CARTRIDGE COMPLETE IV 055-150 32400527

4

KIT STAINLESS STEEL

KIT STAINLESS STEEL IVT 2000B 32400604KIT STAINLESS STEEL IVT/VB 2000S 32400605KIT STAINLESS STEEL IVT 3000B 32400607KIT STAINLESS STEEL IVT/IVB 3000S 32400608KIT STAINLESS STEEL (100L) IVB 3000S 32400610

KIT MACHINE

KIT COMPLETE MACHINE 38MM 82241600KIT COMPLETE MACHINE 50MM 82241800

KIT POLYURETHANE MACHINE AND FLOORS

KIT COMPLETE MACHINE 38MM 22168900KIT COMPLETE MACHINE 50MM 22168800KIT COMPLETE MACHINE AND FLOORS 38MM 21691000KIT COMPLETE MACHINE AND FLOORS 50MM 22169000

KIT OIL RESISTANT MACHINE AND FLOORS


KIT NO STATIC MACHINE AND FLOORS


DESCRIPTION DIAMETER REF. NO.

OTHER KITS

KIT INLET DRY FLOOR 50MM MACHINE LIGHT 82241600KIT DRY FLOOR 50MM MACHINE CLEANING 82241800KIT OVERHEAD CLEANING 38MM 82242000FLOOR KIT 32MM 82241000INDUSTRIAL KIT 38MM ANTISTATIC 22318600FOOD&BEVERAGE CLEAN. 38MM GD COUPLING KIT 12177300FLOOR AND MACHINE 38MM CLEANING KIT LIGHT 82241400OIL & SWARF CLEANING 38MM KIT GD COUPLING 12177200STANDARD CLEANING 38MM KIT GD COUPLING 12177100FLOOR AND MACHINE 38MM CLEANING KIT 82241200FLOOR CLEANING KIT 38MM PUR HOSE FOR 50MM INLET 22169100STARTER KIT 32MM AUTOCLAVABLE, IVT 1000CR 80556700STARTER KIT 32MM NOSTAT, IVT 1000CR 80551200STARTER KIT 32MM STD, IVT 1000CR 80551100

5

“Keep it clean” should be the motto in every factory, warehouse and workshop.

Accidents often occur as the result of a dirty or wet floor, and they are easy to avoid

by regular use of professional cleaning equipment.

Whatever the job, regular cleaning or highly hazardous material removal, dry dust

or wet spills, we design the equipment to be effective and productive.

CLEANING KITS

DUST BAG INFORMATION

6

PLASTIC BAGS ANDCONTAINER INSERTS FORUSE IN MACHINES WITH-OUT BAG CONNECTION:

Clear plastic bag: To be used for non-

hazardous dust, both dry and moist in

all ø460, ø500 and ø 560 containers.

(82366400)

Blue plastic bag: To be used for non-

or medium hazardous dust, both dry

and moist in all ø460, ø500 and ø 560

containers. (82366500)

Red plastic bag: To be used for non-,

medium or high hazardous dust, both

dry and moist in all ø460, ø500 and ø

560 containers. (82366600)

In order to use the plastic bag inserts

in the above mentioned containers a

depressor pipe needs to be installed

between the filter chamber and the

bottom of the dustbin, in order to

keep the bag in place.

ABS container insert: To be used in all

ø460 mm containers for hazardous

dust. Approved for dust handling in

class "H". The ABS container is sealed

after use with a lid before disposal of

the collected material. (32400159)

The use of dust bags in differentvariants, is a safe and easy way tohandle dust and debris.

When dealing with hazardous dustclassified as "M" or "H" class, theuse of a dust collecting media iscompulsory.

Nilfisk-Advance A/S offers avariety of different dust bags,plastic bags and container insertsfor easy and safe handling of dust.

SPECIAL DUST BAGS: Plastic bag: Plastic bag with inlet

connection to be used for all kinds of

non / medium hazardous dust, dry or

moist. (21995400)

Dust bag high filtration: A high

filtration cloth dust bag mounted

inside a plastic bag, for efficient

filtration and safe handling of various

kinds of dust in class "L" and "M".

(21695900)

Dust safe bag: A high filtration dust

bag mounted inside a safety mesh,

and a plastic safety bag. Connected to

the inlet and after use that plastic bag

is sealed before disposal.

The safe bag system is approved for

"H" class dust and handling of

asbestos according to TRGS 519.

Available in various sizes. (03034000,

03034200, 03034300)

PAPER DUST BAGS: Dust bag normal "Blue": to be used

for "standard" non-hazardous dry

dust. (81584000)

Dust bag fine "Green": to be used

for "fine" non hazardous dry dust.

(81999000)


PLASTIC DUST BAGS

PLASTIC BAG GM 625/626 21695400(46L BY 5 PCS) GB 726/826

IVT 2000S/B, IVB 2000SPLASTIC BAG CLEAR GS/GM 83 82366400(69L BY 5 PCS) GB 833/933/1033/1133

IV 055-150IVT 3000S/B, IVB 3000S

PLASTIC BAG BLUE HAZARDOUS DUST GS/GM 83 82366500(69L BY 5 PCS) GB 833/933/1033/1133

IV 055-150IVT 3000S/B, IVB 3000S

PLASTIC BAG RED VERY HAZARDOUS DUST GS/GM 83 82366600(69L BY 5 PCS) GB 833/933/1033/1133

IV 055-150IVT 3000S/B, IVB 3000S

SPECIAL DUST BAGS

DUST BAG BLUE STANDARD GB 1133 02764100(69L BY 25 PCS)DUST BAG HIGH FILTRATION GM 625/626 21695900(46L UNIT) GB 726/826

IV 022/040IVT 2000S/B, IVB 2000S

DUST SAFE BAG SYSTEM GB 1033 03034200(69L BY UNIT) IV 022/040

IV 055-150DUST SAFE BAG SYSTEM IVT 2000B 03034000

IVT 3000BDUST SAFE BAG SYSTEM GB 1133 03034300(69L UNIT) IV 055-150DUST SAFE FOR GSP80H IVT 1000CR 02171000DUST BAG CLOTH (46L) GS/GM 82, GM 625/626 21695900

GB 726/826IV 022/040IVT 2000S/B, IVB 2000S

7

PAPER DUST BAGS

DUST BAG (6.5L BY 5 PCS) GM 80P, IVT 1000CR 81620000DUST BAG (18L BY 5 PCS) GM 80 20LDUST BAG NORMAL (46L BY 5 PCS) GS/GM 82, GM 625/626 81584000

GB 726/826IV 022/040IVT 2000S/B, IVB 2000SID 2050

DUST BAG FINE (46L BY 5 PCS) GS/GM 82, GM 625/626 81999000GB 726/826IV 022/040IVT 2000S/B, IVB 2000S

DUST BAGS

8

HOSE INFORMATION

The airspeed through the suctionhose or the pipesystem is the mostimportant parameter in suction.

In general: Light dust / material = low

airspeed. Heavy metal shavings, dust

from sandblasting etc. requires high

airspeed.

Some examples of required airspeed

for various kinds of dust / materials,

(guideline only):

Fine wood dust 14-16m/sec

Fine sand 15-20m/sec

Glass dust 6-20m/sec

Metal dust 18-25m/sec

Metal shavings 20-25m/sec

Flour 20-25m/sec

Cement dust 25-30m/sec

Light oil 25-30m/sec

Heavy oil / sludge 30-40m/sec

Coal dust 30-40m/sec

Moulding sand 35-45m/sec

Mercury 65-70m/sec

A 200m3/h vacuum cleaner equipped

with a 38mm hose equals app.

50m/sec - the same unit equipped with

70mm hose equals app. 15m/sec.

PUR-L Light weight Polyurethane hoseMaterial: hose wall: polyester

polyurethane

spiral: spring steel wire

Applications

• Transport and suction hose for

abrasive solids

• Gaseous and liquid media

• Suction of paper and textile fibres

• Transport of small particled dusts

and powders

• Oil spray extraction

• Suitable for ATEX applications

Properties

Temperature range -40 - +90°C,

intermittent to +125°C

• Highly abrasion resistant

• Resistant to oil and fuels

• Gas tight

• Good chemical resistance

• Free of plasticizer

• Free of halogens

• Lightweight

• Extremely flexible

• Small bend radius

• High tensile and burst strength

• Nearly smooth inside

• Optimum flow characteristics

• Electrically conductive to BGR 132

by grounding spiral

PUR-H Medium weightPolyurethane hoseMaterial: hose wall: polyester

polyurethane

spiral: spring steel wire

Applications

• Extraction of coarse grained

particles with high flow volumetric

• For abrasive solids, gaseous and liq-

uid media

• Standard hose for industrial vacuum

cleaners

• Transport of granules

• Transport of chips

• Suction and transport of paper

fibres

• Oil spray extraction

• Suitable for ATEX applications

Properties

Temperature range -40 - +90°C,

intermittent to +125°C

• Highly abrasion resistant

• Resistant to oil and fuels

• Gas tight

• Good chemical resistance

• Free of halogens and plasticizer

• Very flexible; reduced weight

• Small bend radius

• Ιmproved pressure and vacuum

characteristics

• High tensile and burst strength

• Nearly smooth inside

• Optimum flow characteristics

• Electrically conductive to BGR 132

by grounding spiral

HOSES

Plastic Grey - EVA material - Etylen-Vinyl-acetate32-38 mm

Properties

• Non conductive

• Temperature range -20 - +65°C

• Very flexible

• Good resistance to bends

Applications

• Light industrial work 32-38 mm

• NOT resistant to acids, oil and

alkalines

• NOT suitable for hot materials or

hot environments

• NOT suitable for static materials

9

Metal hose - Macrofrex50-70-100 mm

Properties

• Temperature range - + 125°C

• Conductive - Resistance < 106

Ohm

• NOT suitable for fluids

• Limited bending

• Heavy duty hose

Applications

• Suitable for static dust and material

• Suitable for grinding dust

• Suitable for abrasive materials

• Suitable for glass, sharp shavings

and similar

• Suitable for warm materials

Green Rubber hose - Nitril Rubber38-50 mm

Properties

• Temperature range -20 + 100°C


Ohm

• Non or limited resistance to oil

• Durable

• Heavy duty hose

Applications

• Suitable for static dust and material

• Suitable for grinding dust

• Suitable for abrasive materials

• Heavy duty hose for metal swarf

and similar materials

Plastic - Black oil resistant - EVAco-polymers P20538-50 mm

Properties

• Temperature range -20 + 65°C


Ohm

• Oil resistant

• Very flexible

• Durable

• Good restoration after bending

Applications

• Suitable for oil and similar liquids

• suitable for static dust and material


hot environments

Plastic - Black conductive - EVAmaterial - Etylen-Vinyl-acetate38-50-70-100 mm

Properties

• Temperature range -20 +65°C


Ohm

• Limited resistance to oil, acids and

alkalines

• Very flexible

• Durable

• Good restoration after bending

Applications

• Suitable for mild grinding dust and

transport of air from preseparators

• suitable for static dust and material

• Easy handling up to 70mm

diameter


hot environments

HOSES DIAMETER 38MM, CONDUCTIVE

HOSE CONDUCT.PL. STEEL BAYO + MUFF 10M BAYO 38 12247700HOSE COMP.W.CURV. TUBE + BAYO 10M BAYO 38 12247600HOSE WITH BAYONET +CURVED TUBE 2M BAYO 38 12247000HOSE STEEL BAYONET + MUFF 2M BAYO 38 12247100HOSE CURVED TUBE + BAYONET 3M BAYO 38 12247200HOSE BAYONET/+ MUFF 3M BAYO 38 12247300HOSE CURVED TUBE + BAYONET 5M BAYO 38 12247400HOSE STEEL BAYONET + MUFF 5M BAYO 38 12247500

DESCRIPTION LENGTH CONNECTOR REF.NO.

HOSES DIAMETER 32MM

HOSE STD. IVT 1000CR 3M 80553100HOSE ANTISTAT IVT 1000CR 3M 80552900HOSE SILICONE IVT 1000CR 3M 80551900

HOSES

10

In industries such as pharmaceuticals, semiconductors, bio-medicals and

others where clean rooms are a necessary part of the production or research

process, total cleaning efficiency is an absolute must. There is no tolerance

for second-rate performance. The clean room has to be clean!

HOSES DIAMETER 38MM, OIL RESISTANT

HOSE OILRESIS.PL COMP.CURV TUBE + BAYONET 10M BAYO 38 12292200HOSE WITH BAYONET + MUFF 10M BAYO 38 12292300HOSE OILRESIS PL GD-COUPLING + BALL JOINT 10M GD 12292500HOSE GD-COUPLING + CURV. TUBE 10M GD 12292400HOSE OILRESIST.PL WITH BAYONET + MUFF 2M BAYO 38 12291100HOSE COMP.CURV TUBE + BAYONET 2M BAYO 38 12291000HOSE WITH BAYONET + MUFF 3M BAYO 38 12291500HOSE GD-COUPLNG + CURVED TUBE 3M GD 12291600HOSE CURVED TUBE + BAYONET 3M BAYO 38 12291400HOSE WITH BAYONET AND MUFF 3M BAYO 38 21603200HOSE GS + SS CURVED TUBE 3M GS 38 11918000HOSE W. CURVED TUBE + BAYONET 3M BAYO 38 11603000HOSE CURVED TUBE + BAYONET 3M BAYO 38 12291400

HOSES DIAMETER 38MM, PUR

HOSE50MM BAYO-38MM CURV.TUBE 3M BAYO 38 12167700HOSE-COUPLING +SS.CURVED TUBE 3M GD 21748000HOSE BAYONET + MUFF 5M BAYO 38 12255400HOSE GD-COUPLING + MUFF 5M GD 12255300HOSE 50MM BAYONET-38MM CURVED TUBE 3M BAYO 50 12167700HOSE 50MM BAYONET-38-MM MUFF 3M BAYO 50 82184700


HOSES

11

Continuous, heavy-duty suction is gained with the reliable industrial vacuum

cleaners from Nilfisk-Advance.

Nilfisk-Advance can provide customized specials of the various machines on

demand, i.e. complete stainless machines, special voltages etc.

HOSES DIAMETER 38MM, PLASTIC

HOSE WITH BAYONET AND MUFF 10M BAYO 38 12255800HOSE GS-COUPLING + MUFF 10M GS 12255600HOSE GREY STEEL BAYONET + BENT TUBE 10M BAYO 38 82343500HOSE GD-COUPLING + MUFF 10M GD 12255700HOSE BRASS BAYO. + ALU.CURVED TUBE 2M BAYO 38 M 11810200HOSE GA70-COUPL + CURVED TUBE 2M GA 11800400HOSE GREY GD-COUPLING + MUFF 2M GD 12330700HOSE GS-COUPLING + MUFF 2M GS 21800700HOSE W. CURVED TUBE + BAYONET 2M BAYO 38 11602500HOSE WITH BAYONET + MUFF 2M BAYO 38 21602700HOSE W.BRASS BAYO AND MUFF 2M BAYO 38 M 21810100HOSE G/GA70/71 + CURVED TUBE 2M GA 12097900HOSE GD-COUP.+SS CURVED TUBE 3M GD 12126600HOSE BRASS BAYO - CURVED TUBE 3M BAYO 38 11810400HOSE GS-COUPING + MUFF 3M GS 38 21800900HOSE W. BRASS BAYONET + MUFF 3M MES BAYO 38 21810300HOSE WITHWITH BAYONET + MUFF 5M BAYO 38 12291900HOSE GD-COUPLING + CURVED TUBE 5M GD 12292000HOSE WET GD-COUPLING + MUFF 5M GD 12292100HOSE CURVED TUBE + BAYONET 5M BAYO 38 12291800HOSE GS-COUPLING + MUFF 5M GS 38 12255200HOSE WITH STEEL BAYO + MUFF 2M BAYO 50 11605500HOSE GREY GD + MUFF 3M GD 12174900HOSE 50MM/38MM 2.6M GD + MUFF 3M GD 12172800HOSE 38/32MM + CURVED PLASTIC TUBE 3M GS 12041500HOSE 38/32MM W.CURVED STEEL TUBE 3M GS 38 12097500HOSE WITH BAYONET AND MUFF 2M BAYO 11343300HOSE W.CURVED TUBE + BAYONET 3M BAYO 11603000

HOSES DIAMETER 38MM, RUBBER

HOSE WITH BAYO AND MUFF 2M BAYO 38 11343300HOSE WITH CURVED TUBE + BAYONET 2M BAYO 38 11381600HOSE GS COUP.+ MUFF 2M GS 11574000HOSE GS + CURVED TUBE 2M GS 11573600HOSE CURVED TUBE + BAYONET 3M BAYO 38 11381700HOSE WITH BAYONET AND MUFF 3M BAYO 38 11343500HOSE GS COUPLING + MUFF 3M GS 11574100HOSE GS COUP. + CURVED TUBE 3M GS 11573700HOSE BALL JOINT + MUFF 3M 11343900HOSE 38/32MM + CURVED TUBE 3M GS 11717000HOSE CURVED TUBE + BAYONET 3M BAYO 11381700HOSE CURVED TUBE + BAYONET 3M BAYO 11381700HOSE WITH BAYONET AND MUFF 3M BAYO 11343500

DESCRIPTION LENGHT CONNECTOR REF.NO.

HOSES

12


HOSE BAYONET + CURVED TUBE 10M BAYO 50 12248600HOSE WITH BAYONET + MUFF 10M BAYO 50 12248700HOSE BAYO.COUP W CURVED TUBE 2M BAYO 50 12248000HOSE WITH BAYONET + MUFF 2M BAYO 50 12248100HOSE CURVED TUBE + BAYONET 3M BAYO 50 12248200HOSE BAYONET + MUFF 3M BAYO 50 12248300HOSE WITH BAYONET + MUFF 5M BAYO 50 12248500HOSE BAYO COUP W CURVED TUBE 5M BAYO 50 12248400HOSE CURVED TUBE + BAYONET 3M BAYO 50 12248200

HOSES DIAMETER 50MM, OIL RESISTANT

HOSE WITH BAYO AND BALL JOINT 10M 12293300HOSE BAYONET + CURVED TUBE 10M BAYO 50 12293200HOSE WITH BAYONET + MUFF 2M BAYO 50 12292700HOSE BAYO COUP + CURVED TUBE 2M BAYO 50 12292600HOSE WITH BAYONET + MUFF 3M BAYO 50 12292900HOSE BAYONET + CURVED TUBE 3M BAYO 50 12292800HOSE WITH BAYONET + MUFF 5M BAYO 50 12293100HOSE BAYONET + CURVED TUBE 5M BAYO 50 12293000

HOSES DIAMETER 50MM, PUR

HOSE BAYO + CURVED STEEL TUBE 3M BAYO 50 12167200HOSE H 3M 03066303HOSE BAYONET + CURVED STEEL TUBE 3M BAYO 50 12167200HOSE WITH BAYONET AND MUFF 2M BAYO 50 82184600

HOSES DIAMETER 50MM, PLASTIC

HOSE WITH BAYONET & MUFF 10M BAYO 50 12256400HOSE WITH BAYONET + MUFF 2M BAYO 50 12256000HOSE 50/38MM 2.6M BAYONET 50MM + TUBE 38MM 2M BAYO 50 11605200HOSE WITH BAYONET + MUFF 5M BAYO 50 12256200HOSE W BAYO + CURVED TUBE 3M BAYO 50 11604000HOSE GREY BAYO.COUP.W CURVED TUBB 10M BAYO 50 12331300HOSE GREY BAYO.COUP.W CURVED TUBB 5M BAYO 50 12331200HOSE GREY BAYO.COUP.W CURVED TUBE 2M BAYO 50 12331100HOSE BAYO COUP AND MUFF 3M BAYO 50 21604200HOSE W BAYONET + CURVED TUBE 3M BAYO 50 11604000HOSE 50/38MM 2.6M BAYONET 50MM + TUBE 38MM 2M BAYO 50 11605200

HOSES DIAMETER 50MM, RUBBER

HOSE BAYONET X 2 2M BAYO 50 00300700HOSE WITH BAYO AND MUFF 2M BAYO 50 10624300HOSE WITH BAYO AND MUFF 3M BAYO 50 10629800HOSE WITH CURVED TUBE + MUFFE 2M BAYO 50 11382000HOSE WITH CURVED TUBE + BAYONET 3M BAYO 50 11382100


HOSES

13

The industrial vacuum cleaners are suitable in a wide range of

applications including food processing, warehouses, iron and metal

industry, ceramics and many other heavy-duty uses.

HOSES DIAMETER 50MM, METAL

HOSE WITH BAYONET + MUFF 3M BAYO 50 02156000HOSE WITH BALL JOINTS 3M BAYO 50 02159900


HOSE RUBBER METAL JOINTS 3M 03063800HOSE CONDUCTIVE PLAST 3M 03060300HOSE METAL JOINTS 3M 03060500HOSE RUBBER METAL JOINTS 5M 03063900


HOSE RUBBER METAL JOINTS 3M 03063800HOSE RUBBER METAL JOINTS 3M 03060300HOSE METAL JOINTS 3M 03060500HOSE RUBBER METAL JOINTS 5M 03063900


HOSE METAL JOINTS 2M 03067300HOSE METAL JOINTS 3M 03067400HOSE PL METAL JOINTS 2M 03063200HOSE RUBBER METAL JOINTS 3M 03064300


HOSE JOINTS 3M 03062400

14

STRAIGHT TUBES

TUBE STRAIGHT 1M 50MM STEEL 10686400TUBE STRAIGHT 1M 50MM ETRONITE 80652700TUBE STRAIGHT 1M 50MM ETRONITE 80691600TUBE STRAIGHT 1.2M 70MM STEEL 03055000STRAIGHT TUBE STEEL WITH BALL 38MM STEEL 10984600TUBE STRAIGHT 0.19M 50MM STEEL 10645800

TUBES

DESCRIPTION LENGTH DIAMETER MATERIAL REF. NO.

CURVED TUBES

TUBE CURVED 1M 38MM ALUMINIUM 11297400TUBE CURVED 90° 8.2M 38MM ALUMINIUM 10967000TUBE CURVED 50MM STEEL 10624400CURVED TUBE STEEL WITH BALL 38MM STEEL 10944000TUBE CURVED ALU BALL WITH SPRING LOCK 38MM ALUMINIUM 11339800CURVED TUBE W. BALL STAINLESS STEEL 38MM STAINLESS STEEL 71917000TUBE CURVED 50MM STEEL 71770400

OTHER TUBES

TUBE CHROME 0.56M 38MM STEEL 11027200TUBE 0.63M 38MM STAINLESS STEEL 11916000TUBE 1M 38MM ALUMINIUM 10961200TUBE 90° WITH SPRING LOCK 0.82M ALUMINIUM 10967000KIT TUBES, IVT 1000CR 2x0.65M 32MM STAINLESS STEEL 11112500TUBE 0.14M 32MM STEEL 11141900EXTENSION TUBE 0.20M 32M STEEL 11182500TUBE STAINLESS STEEL, IVT 1000CR 0.25M 32MM STAINLESS STEEL 11882505TUBE STEEL 11183000TUBE 1M 32MM ALUMINIUM 11262400TUBE BEND 90° WITH SPRING LOCK 1M 38MM ALUMINIUM 11297400REDUCING TUBE 38-32MM STEEL 11503100REDUCTION TUBE 38-50MM STEEL 21317200TUBE 50MM STEEL 71325200TUBE 50MM STEEL 71325400TUBE 50MM STEEL 71770100TUBE 50MM STEEL 71770300

Etronite tubesProperties

• Bakelite paper and a resin system

• High pressure composite material

• Very good weight/strength

relationship

Applications

• Transformer stations

• Electronic industries

Aluminium tubesProperties

• Very light in weight

• Easy to handle

Applications

• Can be used for all kinds of

standard wet and dry cleaning

• NOT for highly abrasive materials

such as acid

• NOT for very hard and sharp

materials such as glass and stone

Steel tubesProperties

• Standard steel tubes

• With chrome covering

Applications

• Can be used for all kinds of stan-

dard dry heavy duty cleaning

• Rigid and resistant to sharp

materials such as metal, glass, stone

etc.

• In wet applications, the steel tubes

will start to corote over time

Stainless steel tubesProperties

• AISI 304

Applications

• Wet applications

• For potentially abrasive materials

• For potentially explosive materials

under the ATEX legislation

15

REDUCERS

DESCRIPTION DIAMETER MATERIAL REF. NO.

REDUCER COUPLING BETWEEN THE HOSE AND TUBE

REDUCER 70-50MM STEEL 03057100REDUCER 70-50MM 03057400

REDUCER HOSE TUBE CURVED 45° 70-50MM STEEL 03056600

REDUCER COUPLING BETWEEN THE CONTAINER INLET AND HOSE

REDUCER 50-38MM ALUMINIUM 10960900REDUCER 100-50MM STEEL 03057000REDUCER 100-70MM STEEL 03056900

REDUCTION TUBE 70/50MM 04182400REDUCTION TUBE 100/70 REDUCTION TUBE 100/70 04187200

COUPLING SLEEVE 100MM 03056400REQUIRED WHEN USING 03057000 AND 03056900

T-COUPLING 70MM 2X50MM 03059601T-COUPLING 70MM 2X70MM 03059500T-COUPLING 100MM 2X70MM 03059000T-COUPLING 100MM 3X70MM 03059100T-COUPLING BAYONET INTO 38MM 2 X 38MM MUFFS 02151200T-COUPLING BAYONET INTO 38MM 3 X 32MM MUFFS 02151100T-COUPLING BAYONET INTO 50MM 2 X 38MM MUFFS 02150800T-COUPLING BAYONET INTO 50MM 2 X 50MM MUFFS 02150900T-COUPLING BAYONET INTO 50MM 3 X 38MM MUFFS 02151300T-COUPLING BAYONET INTO 50MM 3 X 50MM MUFFS 02151000CONNECTING TUBE 50MM 82218600T-COUPLING 70MM 3X50MM 03059701T-COUPLING 100/2X 70MM 100MM 2X70MM 03146100BRANCH "Y"PIECE 70MM 3X50MM 03059700

The dedicated clean room vacuum cleaner, IVT 1000CR, comes in

different versions and has a range of accessory kits to suit all clean

room environments.

16

NOZZLES

0°C

130°C

NOZZLE FIXED FLOOR

600MM FOR IVT 2000B 50MM x x 32400820FOR GM/625/725 750MM 50MM x x 11669000750MM FOR GM625 MM. 50MM x x 11839000500MM 2XBRUSH 2XBLADES 50MM x 12294500750MM 2XBRUSH 2XBLADES 50MM x 12294600500MM GS82-W. RUB BLADES 50MM x 11372800

NOZZLE HARD FLOOR

400MM W. RUBBER LIPS 38MM x x 10947300300MM ALU W. RUBBER LIPS 38MM x x 11035200

NOZZLE WHEELED FLOOR

ALU. 400MM ADJ. RUB. LIPS 50MM x x 10915000ALU. ADJ. RUB. LIPS 500MM 50MM x x 10693500

ROUND BRUSH

80MM NECK, ALU/WOOD 32MM x 11142100100MM ALU/WOOD 38MM x 10989000BLUE 70MM 38MM x x 10950203BLUE 70MM 50MM x x 10643203GREEN 70MM 38MM x x 10950202GREEN 70MM 50MM x x 10643202YELLOW 70MM 38MM x x 10950205YELLOW 70MM 50MM x x 10643205WHITE 70MM 38MM x x 10950204WHITE 70MM 50MM x x 10643204NATURAL HAIR 70MM 38MM x 12422500RED 70MM 38MM x x 10950201RED 70MM 50MM x x 10643201BLACK 70MM 38MM x x 10950200BLACK 70MM 50MM x x 10643200BLUE BRISTLES D 70MM 38MM 10950203BRUSH ROUND GREY 100% NATU BROWN BRISTLES 32MM 11276901BRUSH ROUND 70MM BLUE NECK BLUE BRISTLES 32MM 22103600

0°C

130°C DESCRIPTION DIAMETER REF. NO.

Nozzle suitable for wet applications

Nozzle suitable for picking up oil

Nozzle suitable for antistatic applications

Nozzle suitable for dry applications

SYMBOL GUIDELINE

Nozzle suitable for ESD applications

Nozzle suitable for temperatures up to 130°C

Food and Drug Administration approved material used

Nozzle capable of being cleaned by the autoclave process

17

NOZZLE FLOOR WET

450 W.ADJ. RUB.BLADES 38MM x 82168000

RUBBER NOZZLE

RUBBER NOZZLE 200 GREY 50MM x x 80640500RUBBER NOZZLE 200 BLACK 50MM x x x 80640501

NOZZLES

BRUSH NOZZLE

280MM PLASTIC 32MM x x 11426700400MM ALU/PLASTIC 32MM x x 11476301400MM ALU/PLASTIC 38MM x 11476101

CONE

RUBBER OILRES. 315MM BLACK 38MM x x 82167900RUBBER OILRES. 315MM BLACK 50MM x x 82167400RUBBER 500 GREY 50MM x x 80691100RUBBER 245 GREY 50MM x x 80650900BEND 180MM 50MM x x 80654600PLASTIC GREY 200MM 38MM x x 80956200RUBBER OILR 200MM BLACK 38MM x 02956200CONE RUBBER 245 MM BLACK 50MM 02650900

0°C


CREVICE NOZZLE

PLASTIC 245MM 32MM 81530400PLASTIC 360MM 32MM 81141200STAINLESS 32MM 80552000

FLEXIBLE NOZZLE

150MM PLASTIC 32MM 81140900150MM INLET 32MM 81140902

In the iron and metal industry, for example, the right accessories

working with the right equipment make clean-up fast and easy.

18

NOZZLES

0°C


MISC.

NOZZLE FLEXIBLE 240MMRUB 65 SHORE 32MM x 81141101NOZZLE 500MM ALUWITH ADJ.RUBBER BLADES 50MM x x 82226700NOZZLE 750MM-4 RUB. LIPSFOR GS/GM 83+GB733/833 50MM x 11372900FLEXIBLE NOZZLE 200MM RUBBER 32MM x x 81141000NOZZLE FLOOR 400MMALU W. RUBBER LIPS 38MM x 11339500NOZZLE WOOD 150MM 38MM x x 11346800BRUSH WOODEN W. SWIVELNECK 50MM 150MM OVAL 11344800FLEXIBLE NOZZLE ANTISTATIC 32MM x x x 81932600PIPE BRUSH UP TO 100MM BLACK 38MM x 82191000PIPE BRUSH UP TO 200MM BLACK 38MM x 82191200NOZZLE GULPER OILRE 50MM25X90 RUBBER 50MM x 82167300NOZZLE GULPER 25X90 BLACK OILRESISTANT 38MM x 82169700NOZZLE WOOD 400MM(FOR CLEANING HOT OVENS) 50MM x x 10662500NOZZLE CREVICE 400MM 50MM x 10643300CREVICE NOZZLE 300 STEEL 38MM x 10949500

COLOURED NOZZLE WITH BRUSH, ROUND

FE/ZN F.PIPE 100MM BLACK (ESD) 38MM x x x x 22430902FE/ZN F.PIPE 200MM BLACK (ESD) 38MM x x x x 22431002FE/ZN F.PIPE 300MM BLACK (ESD) 38MM x x x x 22431102FE/ZN F.PIPE 100MM GREY STD. 38MM x x x 22430900FE/ZN F.PIPE 200MM GREY STD. 38MM x x x 22431000FE/ZN F.PIPE 300MM GREY STD. 38MM x x x 22431100ST.STEEL F.PIPE 100MM DARKGREY 38MM x x x x x 22430901ST.STEEL F.PIPE 200MM DARKGREY 38MM x x x x x 22431001ST.STEEL F.PIPE 300MM DARKGREY 38MM x x x x x 22431101ST.STEEL F.PIPE 100MM GREEN (FDA) 38MM x x x x 22430906ST.STEEL F.PIPE 300MM GREEN (FDA) 38MM x x x x 22431106FE/ZN F.PIPE 100MM GREY STD. 50MM x x x 22432400FE/ZN F.PIPE 200MM GREY STD. 50MM x x x 22432500FE/ZN F.PIPE 300MM GREY STD. 50MM x x x 22432600FE/ZN F.PIPE 100MM GREY STD. 50MM x x x 22433700FE/ZN F.PIPE 200MM GREY STD. 50MM x x x 22433800FE/ZN F.PIPE 300MM GREY STD. 50MM x x x 22433900FE/ZN F.PIPE 100MM BLACK (ESD) 50MM x x x x 22432402FE/ZN F.PIPE 200MM BLACK (ESD) 50MM x x x x 22432502FE/ZN F.PIPE 300MM BLACK (ESD) 50MM x x x x 22432602FE/ZN F.PIPE 100MM BLACK (ESD) 50MM x x x x 22433702FE/ZN F.PIPE 200MM BLACK (ESD) 50MM x x x x 22433802FE/ZN F.PIPE 300MM BLACK (ESD) 50MM x x x x 22433902ST.STEEL F.PIPE 100MM DARKGREY 50MM x x x x x 22433701ST.STEEL F.PIPE 200MM DARKGREY 50MM x x x x x 22433801ST.STEEL F.PIPE 300MM DARKGREY 50MM x x x x x 22433901ST.STEEL F.PIPE 100MM DARKGREY 50MM x x x x x 22432401ST.STEEL F.PIPE 200MM DARKGREY 50MM x x x x x 22432501ST.STEEL F.PIPE 300MM DARKGREY 50MM x x x x x 22432601ST.STEEL F.PIPE 100MM GREEN (FDA) 50MM x x x x 22433706ST.STEEL F.PIPE 100MM BLUE (FDA) 50MM x x x x 22433707ST.STEEL F.PIPE 200MM

NOZZLES

YELLOW (FDA) 50MM x x x x 22433804ST.STEEL F.PIPE 200MM GREEN (FDA) 50MM x x x x 22433806ST.STEEL F.PIPE 200MM BLUE (FDA) 50MM x x x x 22433807ST.STEEL F.PIPE 300MM GREEN (FDA) 50MM x x x x 22433906ST.STEEL F.PIPE 300MM BLUE (FDA) 50MM x x x x 22433907

0°C


Where cleanliness is essential, don’t take chances. Choose professional

cleaning equipment designed with your needs in mind.

A wide variety of special accessories such as nozzles for overhead cleaning,

ensure a perfectly clean working environment.

19

COLOURED NOZZLE WITH BRUSH, FLAT

FE/ZN FLAT 300MM GREY STD. 38MM x x x 22431600FE/ZN FLAT 300MM BLACK (ESD) 38MM x x x x 22431602ST.STEEL FLAT 300MM DARKGREY 38MM x x x x x 22431601ST.STEEL FLAT 300MM GREEN (FDA) 38MM x x x x 22431606ST.STEEL FLAT 300MM BLUE (FDA) 38MM x x x x 22431607FE/ZN FLAT 300MM BLACK (ESD) 50MM x x x x 22432902FE/ZN FLAT 300MM BLACK (ESD) 50MM x x x x 22434202FE/ZN FLAT 300MM GREY STD. 50MM x x x 22432900FE/ZN FLAT 300MM GREY STD. 50MM x x x 22434200ST.STEEL FLAT 300MM DARKGREY 50MM x x x x x 22432901ST.STEEL FLAT 300MM DARKGREY 50MM x x x x x 22434201ST.STEEL FLAT 300MM BLUE (FDA) 50MM x x x x 22432907ST.STEEL FLAT 300MM RED (FDA) 50MM x x x x 22434205ST.STEEL FLAT 300MM GREEN (FDA) 50MM x x x x 22434206ST.STEEL FLAT 300MM BLUE (FDA) 50MM x x x x 22434207

NOZZLES

20

0°C


COLOURED NOZZLE WITH LIPS, ROUND

FE/ZN F.PIPE 100MM BLACK (ESD) 38MM x x x x 22430102FE/ZN F.PIPE 200MM BLACK (ESD) 38MM x x x x 22430202FE/ZN F.PIPE 300MM BLACK (ESD) 38MM x x x x 22430302FE/ZN FLAT 300MM BLACK (ESD) 38MM x x x x 22430802ST.STEEL F.PIPE 100MM WHITE (FDA) 38MM x x x x 22430103ST.STEEL F.PIPE 100MM YELLOW (FDA) 38MM x x x x 22430104ST.STEEL F.PIPE 100MM RED (FDA) 38MM x x x x 22430105ST.STEEL F.PIPE 100MM GREEN (FDA) 38MM x x x x 22430106ST.STEEL F.PIPE 100MM BLUE (FDA) 38MM x x x x 22430107ST.STEEL F.PIPE 100MM DARKGREY 38MM x x x x x 22430101ST.STEEL F.PIPE 200MM WHITE (FDA) 38MM x x x x 22430203ST.STEEL F.PIPE 200MM YELLOW (FDA) 38MM x x x x 22430204ST.STEEL F.PIPE 200MM RED (FDA) 38MM x x x x 22430205ST.STEEL F.PIPE 200MM GREEN (FDA) 38MM x x x x 22430206ST.STEEL F.PIPE 200MM BLUE (FDA) 38MM x x x x 22430207ST.STEEL F.PIPE 300MM WHITE (FDA) 38MM x x x x 22430303ST.STEEL F.PIPE 300MM YELLOW (FDA) 38MM x x x x 22430304ST.STEEL F.PIPE 300MM RED (FDA) 38MM x x x x 22430305ST.STEEL F.PIPE 300MM GREEN (FDA) 38MM x x x x 22430306ST.STEEL F.PIPE 300MM BLUE (FDA) 38MM x x x x 22430307ST.STEEL F.PIPE 200MM DARKGREY 38MM x x x x x 22430201ST.STEEL F.PIPE 300MM DARKGREY 38MM x x x x x 22430301FE/ZN F.PIPE 100MM BLACK (ESD) 50MM x x x x x 22431802FE/ZN F.PIPE 200MM BLACK (ESD) 50MM x x x x 22431902FE/ZN F.PIPE 300MM BLACK (ESD) 50MM x x x x 22432002FE/ZN F.PIPE 100MM BLACK (ESD) 50MM x x x x 22433102FE/ZN F.PIPE 200MM BLACK (ESD) 50MM x x x x 22433202FE/ZN F.PIPE 300MM BLACK (ESD) 50MM x x x x 22433302ST.STEEL F.PIPE 100MM DARKGREY 50MM x x x x x 22431801ST.STEEL F.PIPE 200MM DARKGREY 50MM x x x x x 22431901ST.STEEL F.PIPE 300MM DARKGREY 50MM x x x x x 22432001ST.STEEL F.PIPE 100MM WHITE (FDA) 50MM x x x x 22431803ST.STEEL F.PIPE 200MM WHITE (FDA) 50MM x x x x 22431903ST.STEEL F.PIPE 300MM WHITE (FDA) 50MM x x x x 22432003ST.STEEL F.PIPE 100MM YELLOW (FDA) 50MM x x x x 22431804ST.STEEL F.PIPE 200MM YELLOW (FDA) 50MM x x x x 22431904ST.STEEL F.PIPE 300MM YELLOW (FDA) 50MM x x x x 22432004ST.STEEL F.PIPE 100MM RED (FDA) 50MM x x x x 22431805ST.STEEL F.PIPE 200MM RED (FDA) 50MM x x x x 22431905ST.STEEL F.PIPE 300MM RED (FDA) 50MM x x x x 22432005ST.STEEL F.PIPE 100MM GREEN (FDA) 50MM x x x x 22431806ST.STEEL F.PIPE 200MM GREEN (FDA) 50MM x x x x 22431906ST.STEEL F.PIPE 300MM GREEN (FDA) 50MM x x x x 22432006ST.STEEL F.PIPE 100MM BLUE (FDA) 50MM x x x x 22431807ST.STEEL F.PIPE 200MM BLUE (FDA) 50MM x x x x 22431907

21

NOZZLES

0°C


ST.STEEL F.PIPE 300MM BLUE (FDA) 50MM x x x x 22432007ST.STEEL F.PIPE 100MM BLUE (FDA) 50MM x x x x 22433107ST.STEEL F.PIPE 200MM BLUE (FDA) 50MM x x x x 22433207ST.STEEL F.PIPE 300MM BLUE (FDA) 50MM x x x x 22433307ST.STEEL F.PIPE 100MM GREEN (FDA) 50MM x x x x 22433106ST.STEEL F.PIPE 200MM GREEN (FDA) 50MM x x x x 22433206ST.STEEL F.PIPE 300MM GREEN (FDA) 50MM x x x x 22433306ST.STEEL F.PIPE 100MM RED (FDA) 50MM x x x x 22433105ST.STEEL F.PIPE 200MM RED (FDA) 50MM x x x x 22433205ST.STEEL F.PIPE 300MM RED (FDA) 50MM x x x x 22433305ST.STEEL F.PIPE 100MM YELLOW (FDA) 50MM x x x x 22433104ST.STEEL F.PIPE 200MM YELLOW (FDA) 50MM x x x x 22433204ST.STEEL F.PIPE 300MM YELLOW (FDA) 50MM x x x x 22433304ST.STEEL F.PIPE 100MM WHITE (FDA) 50MM x x x x 22433103ST.STEEL F.PIPE 200MM WHITE (FDA) 50MM x x x x 22433203ST.STEEL F.PIPE 300MM WHITE (FDA) 50MM x x x x 22433303ST.STEEL F.PIPE 100MM DARKGREY 50MM x x x x x 22433101ST.STEEL F.PIPE 200MM DARKGREY 50MM x x x x x 22433201ST.STEEL F.PIPE 300MM DARKGREY 50MM x x x x x 22433301

COLOURED NOZZLE WITH LIPS, FLAT

NOZZLE FLOOR AUTOCLAVABLE 32MM x x x 22430808NOZZLE FLOOR ANTISTATIC 32MM x x x 22431608NOZZLE FLOOR STANDARD 32MM x x 22431611ST.STEEL FLAT 300MM BLUE (FDA) 38MM x x x x 22430807ST.STEEL FLAT 300MM GREEN (FDA) 38MM x x x x 22430806ST.STEEL FLAT 300MM RED (FDA) 38MM x x x x 22430805ST.STEEL FLAT 300MM YELLOW (FDA) 38MM x x x x 22430804ST.STEEL FLAT 300MM WHITE (FDA) 38MM x x x x 22430803ST.STEEL FLAT 300MM DARKGREY 38MM x x x x x 22430801FE/ZN FLAT 300MM BLACK (ESD) 50MM x x x x 22432302FE/ZN FLAT 300MM BLACK (ESD) 50MM x x x x 22433602ST.STEEL FLAT 300MM DARKGREY 50MM x x x x x 22432301ST.STEEL FLAT 300MM DARKGREY 50MM x x x x x 22433601ST.STEEL FLAT 300MM WHITE (FDA) 50MM x x x x 22432303ST.STEEL FLAT 300MM WHITE (FDA) 50MM x x x x 22433603ST.STEEL FLAT 300MM YELLOW (FDA) 50MM x x x x 22432304ST.STEEL FLAT 300MM YELLOW (FDA) 50MM x x x x 22433604ST.STEEL FLAT 300MM RED (FDA) 50MM x x x x 22432305ST.STEEL FLAT 300MM RED (FDA) 50MM x x x x 22433605ST.STEEL FLAT 300MM GREEN (FDA) 50MM x x x x 22432306ST.STEEL FLAT 300MM GREEN (FDA) 50MM x x x x 22433606ST.STEEL FLAT 300MM BLUE (FDA) 50MM x x x x 22432307ST.STEEL FLAT 300MM BLUE (FDA) 50MM x x x x 22433607

22

Cotton filters:High quality general purpose

interception filter. Suitable for almost

all types of dry dust.

Short term resistance to organic

solvents.

• Ideal for general cleaning

• Woodworking industry:

Fine softwood sawdust

• Metalworking:

Steel shavings

• Textile and clothing manufacture

• Yarn dust, fabric remnants

• Plastic production

• Maximum operating temperature

90ºC

• Filtration of particles > 2µ

99.85

FILTER INFORMATION

ULPA filterUltra Low Penetration Air

Diffusion filter.

Required filtration for toxic and

hazardous dusts.

Exhaust filter suits Clean Room

applications.

• Metalworking:

Steel and metal dusts

• Pharmaceuticals

dust from pill manufacturing

• Electronics

• Clean rooms

• Hospitals


90°C

• Filtration of particles >0,1µ

99.9995%

HEPA filterHigh Efficiency Particulate Air

Diffusion filter.

Required for filtration of all very fine,

hazardous dust.

Exhaust filter suits Clean Room

applications.

• Metalworking:

Steel and metal dusts

• Pharmaceuticals


• Electronics

• Clean rooms

• Hospitals


90°C

• Filtration of particles >0,3µ

99.995%

NOMEXInterception filter.

Excellent resistance to alkalines.

Can withstand sparks and extremely

high temperatures.

• Woodworking industry

sawdust from oak and beech

• Metalworking

steel shavings, metal dusts

• Boiler cleaning


200°C

• Filtration of particles > 2µ

99.94%

PTFE / GORETEX PES (standard and antistatic)

Interception filter.

Recommended for all types of fine

non / semi -hazardous dusts.

Do not use for abrasive dust.

• Woodworking industry

Fine sawdust

• Metalworking

Steel shavings, metal dusts

• Pharmaceuticals


• Production of paint and lacquer

• Production of insecticides


135°C

• Filtration of particles < 2µ

99.94%

Polyester filters (standard and antistatic)

High quality general purpose inter-

ception filter. Suitable for almost all

types of dry dust.

Good resistance to organic solvents.

• Ideal for general cleaning

• Woodworking industry:

Fine softwood sawdust

• Metalworking:

Steel shavings

• Textile and clothing manufacture

• Yarn dust, fabric remnants

• Plastic production


150ºC

• Dust class "L"

23

FILTERS


FILTER COTTON

FILTER COTTON 21000CM2 GM 80P 61543000GS/GM 80GS/GM 82

FILTER COTTON 6600CM2 GS/GM 82 61341301GM 625/626

FILTER COTTON 14300CM2 GS/GM 83 61390600

FILTER COTTON 16000CM2 GB 726/826 61854000

FILTER COTTON 18500CM2 GS/GM 83 61709100GB 833/933

FILTER COTTON 41000CM2 GB 833/933 03015101GB 1033

FILTER COTTON 16600CM2 IVT/IVB 2000 32400572

FILTER COTTON 24700CM2 IVT/IVB 3000 32401039

FILTER HEPA

HEPA EXHAUST FILTER, INCL. 2 PC O-RINGS GS/GM 80 21738000GM 80 PGS GM 82GM 625/626GS/GM 83

HEPA CARTRIDGE FILTER GB 833/933 21778000GB 1033GB 726/826

HEPA H-CLASS IVT/ 2000 32400314IVB 3000 32400542

HEPA H-CLASS IV 022/IV 040 32400125IV 055/075/110/150 32400240

HEPA FILTER KIT IVT 1000CR 80556400

FILTER ULPA

FILTER ULPA MOTOR INCL. 2 PC O-RINGS GS/GM 80 21739000GM 80 PGS GM 82GM 625/626GS/GM 83

ULPA CARTRIDGE FILTER GB 726/826 21779000GB 833/933GB 1033

ULPA FILTER KIT IVT 1000CR 80556600

24


FILTER GORE TEX

GORE-TEX FILTER GM 80P 61909800GS/GM 80

FILTER GORE-TEX 6600CM2 GM 80P 61909200GS/GM 80

GORE-NOSTATIC FILTER GM 80P 61909800GS/GM 80IVT 1000CR

FILTER GORE NO-STAT 6600CM2 GS/GM 82 62048200GM 625/626

FILTER GORE NO-STATIC 14300CM2 GS/GM 83 62048300

FILTER GORE NO-STAT 16000CM2 GS/GM 83 62048600GM 625/626GB 726/826

FILTER GORE NO-STAT 18500CM2 GS/GM 83 62048400GB 833/933

FILTER GORE TEX PES 14300CM2 GS/GM 83 61909900

FILTER GORE TEX PES3 16000CM2 GM 625/626 61908300GB 726/826

FILTER GORE TEX PES3 18500CM2 GS/GM 83 81904000GB 833/933GB 1033

FILTER GORE TEX PES3 41000CM2 GB 833/933 03015100GB 1033

FILTERS

FILTER NOMEX

NOMEX FILTER GM 80 P 82243100

FILTER NOMEX 6600CM2 GS/GM 82 82243200

FILTER NOMEX 14300CM2 GS/GM 83 82243400

FILTER NOMEX 16000CM2 GM 625/626 82243300GB 726/826

FILTER NOMEX 18500CM2 GS/GM 83 82243500GB 833/933

FILTER NOMEX 41000CM2 GB 833/933 82243900GB 1033

NOMEX FILTER IV 022/040 32400330

FILTER NOMEX KIT IV 055/075/110 32400902

FILTER NOMEX KIT IV150 32400908

25

FILTERS


FILTER CLASS H

FILTER KIT CLASS H IVT 2000B 32400599IVT 3000B

FILTER KIT CLASS H IVT/IVB 2000S 32400600IVT/IVB 3000S

FILTER CLASS M

M"CLASS FILTER D.460 IV 022/040 32400331

FILTER KIT CLASS M IVT 2000B 32400591IVT 3000B

FILTER KIT CLASS M IVT/IVB 2000S 32400592IVT/IVB 3000S

FILTER CLASS M KIT IV 055/075/110 32400903FILTER CLASS M KIT IV 150 32400909

FILTER POLYESTER STANDARD AND ANTISTATIC

STANDARD ANTISTATIC FILTER IV 022/040 32400328

FILTER ANTISTATIC STD KIT IV 055/075/110 32400900FILTER ANTISTATIC STD KIT IV 150 32400906

STANDARD POLYESTER FILTER IV 022/040 32400326

FILTER POLYESTER STD KIT IV 055/075/110 32400898FILTER POLYESTER STD KIT IV 150 32400904

FILTER PTFE STANDARD AND ANTISTATIC

PTFE FILTER IV 022/040 32400327PTFE ANTISTATIC IV 022/040 32400329

FILTER PTFE KIT IV 055/075/110 32400899FILTER PTFE KIT IV 150 32400905

FILTER ANTISTATIC PTFE KIT IV 055/075/110 32400901FILTER ANTISTATIC PTFE KIT IV 150 32400907

HEPA filter units meet the need for critical cleaning, such as clean rooms

and pharmaceutical applications, and hazardous work such as asbestos or

lead dust removal.

26

FILTERS


SPECIALS FILTERS

MICRO-STATIC FILTER GM 80 P 11641000

MOTOR PROTECTION FILTER POLYESTER FILTER GM 80 P 11730410GS/GM 82GM 625/626GB/726/826GS/GM 83

EXHAUST WITH DIFFUSER GM 80 P 21573001

SOUND SUPPRESSOR AND MOTORS GS/GM 80 11750703

DIFFUSER BAG F.GB-EXHAUST BLUE GB 726/826 31228700GB 833/933GB 1033

DIFFUSER FILTERS 2 PCS GS/GM 82 11693700GM 625/626GS/GM 83

EXHAUST FILTER KIT GS/GM 80 11731003GM 80 P GS/GM 82GM 625/626GS/GM 83

FILTER,KIT EXHAUST IVT 2000-3000B/S 32400602

OIL FILTER PAD IW 2050 22163700OIL ABSORBER PAD IW 2050 22165200

CARTRIDGE FILTER STANDARD ID 2050 22313400CARTRIDGEFILT PTFE FINE DUST ID 2050 22316600

FILTER UNIT GB 1133 04005300

ABSOLUTE-FILTER 1P-3134/ 0,9-1 ART NR. 1650895 GB 1033 02170500ABSOLUTE-FILTER 1P-3134-1 ART.-NR. 165 089 GB 1133 02170000

The dedicated clean room vacuum cleaner, IVT 1000CR, meets the most stringent of clean

room classification standards, ISO 4, meaning maximum 10 particles equal to or greater than

0.5 µm per cubic foot of air. To achieve this, ultimate filtration levels and completely leak-proof

construction are essential.

27

NOTES

96020206-05/09 © 2005.09 Nilfisk-Advance Group Printed in Denmark by Dronninglund Bogtryk A/S

Nilfisk-Advance A/SSognevej 25DK-2605 BrøndbyDenmarkTel.: +45 43 23 81 00Fax: +45 43 43 77 00www.nilfisk-advance.com

nilfisk-advance.com

Nilfisk-Advance is dedicated to providing cleaning professionals

around the world with a total package of products, know-how and

service that is in a class of its own. To live up to our position as the

world’s top supplier of professional cleaning equipment - we know

that in today's competitive global society, we have to be better than

ever before in all areas.

This is why we have introduced more than 30 new products during

the past year - with more to follow in the months ahead. All of

these products stand on the leading edge of cleaning equipment

technology and are backed by the highest levels of technical and

logistical service.

Cleaning efficiency means more than just getting the job done well.

It also means being able to fulfil the task with optimal productivity

to save you time and money. It means making the machines light-

weight and easy to operate, with as low a noise-level as possible

and with full consideration to the environment in which we work.

When you buy a Nilfisk-Advance machine, you are getting a partner

dedicated to providing the most efficient means of handling your

professional cleaning requirements. This is why we are a leader, and

this is how we can serve you better.

Serving you better

Professional cleaning equipment - bulengineering.combulengineering.com/img/OBIAVI/Nilfisk...

Documents

Transcript of Professional cleaning equipment - bulengineering.combulengineering.com/img/OBIAVI/Nilfisk...