PRODUCTS OF CHOICE: SEALING SYSTEMS … saving... · we care quality, durability & functionality...

NOFIRNO 22/15

NOFIRNO 22/15

NOFIRNO 22/15

NOFIRNO 22/15

NOFIRNO 22/15

NOFIRNO 22/15

NOFIRNO 22/15

NOFIRNO 22/15

NOFIRNO 22/15

NOFIRNO® sealing systemfor larger and/or off centre pipes

SLIPSIL® sealing plugsSLIPSIL® conduit sleeves

CRUSHER® fire stop for plastic pipes

LIFE SAVING PENETRATION SEALSDESIGNED TO PROTECT

TODAY - NEXT WEEK – NEXT YEAR - NEXT DECADE

PRODUCTS OF CHOICE: SEALING SYSTEMS WATER & GAS TIGHTNESS - FIRE INTEGRITY

QUALITY, DURABILITY & FUNCTIONALITY LONG-TERM VIABILITY AND INTEGRITYLOWEST TOTAL COST OF OWNERSHIPWE CARE

Series: 82

F

type A B C D E F G plug art. no. art. no. series steel stainless 1.4571

SL 41 WD 47 41 47 29 8 75 102 41 60.8042 60.8062 SL 55 WD 61 55 59 43 8 90 126 55 60.8043 60.8063 SL 70 WD 78 70 59 58 8 105 126 70 60.8044 60.8064 SL 82 WD 88.5 82 59 68 8 115 126 82 60.8045 60.8065 SL 100 WD 108 100 59 85 8 135 126 100 60.8046 60.8066 SL 125 WD 134 125 59 110 8 160 126 125 60.8047 60.8067 SL 150 WD 159 150 72 135 8 185 152 150 60.8048 60.8068

All dimensions in mm

E

AB

SLIPSIL® CONDUIT SLEEVES WITH SHOULDER INSIDEEXACTLY FITTING TO THE SLIPSIL® PLUG SERIES

D

GC

green protective coating,for steel pipes

Aluminum conduit sleeves EN AW-6060 T66 are available but not CDW seam welded.

1) steel EN 10216-1/10210 - DIN (2448) St. 52-3N2) stainless steel EN 10216-5 TC1 and EN 10297-2 - WNR 1.43013) stainless steel EN 10216-5 ASTM A812 - WNR 1.4571

CDW seam welded

CDW seam welded

Serie

s: 8

2Se

ries:

82

type A B C D plug art. no. art. no. series steel stainless

SL 37 WS 42 37 120 47 37 60.8510 60.8530 SL 41 WS 47 41 120 47 41 60.8511 60.8531 SL 55 WS 60 55 160 59 55 60.8512 60.8532 SL 70 WS 78 70 160 59 70 60.8513 60.8533 SL 82 WS 88.5 82 160 59 82 60.8514 60.8534 SL 100 WS 108 100 160 59 100 60.8515 60.8535 SL 107 WS 114 107 160 59 107 60.8516 60.8536 SL 131 WS 139 131 160 59 131 60.8517 60.8537 SL 159 WS 168 160 180 71 159 60.8518 60.8538 SL 207 WS 218.5 207 180 71 207 60.8519 60.8539

SL 37 WS 42 37 250 47 37 60.8520 60.8540 SL 41 WS 47 41 250 47 41 60.8521 60.8541 SL 55 WS 60 55 250 59 55 60.8522 60.8542 SL 70 WS 78 70 250 59 70 60.8523 60.8543 SL 82 WS 88.5 82 250 59 82 60.8524 60.8544 SL 100 WS 108 100 250 59 100 60.8525 60.8545 SL 107 WS 114 107 250 59 107 60.8526 60.8546 SL 131 WS 139 131 250 59 131 60.8527 60.8547 SL 159 WS 168 160 250 71 160 60.8528 60.8548 SL 207 WS 218.5 207 250 71 207 60.8529 60.8549


type code

AB

SLIPSIL® CONDUIT SLEEVES WITHOUT SHOULDEREXACTLY FITTING TO THE SLIPSIL® PLUG SERIES

Cgreen protective coating,for steel pipes

trade markoutside

1) steel EN 10216-1/10210 - DIN (2448) St. 52-3N2) stainless steel EN 10216-5 ASTM A812 - WNR 1.45713) aluminum EN AW-6060 T66 D

mille

d ou

t to

size

of

sea

ling

plug

pipe inlet rounded off

Series

: 82

SLIPSIL® FLANGED CONDUIT SLEEVES EXACTLY FITTING TO THE SLIPSIL® PLUG SERIES

AB

C

DE

F

H G

type A B C D E F G H plug art. no. art. no. art. no. series steel stainless gasket 1.4571 SL 41 FB 47 41 47 29 10.5 6 108 79 41 60.8002 60.8022 51.9002 SL 55 FB 61 55 59 43 10.5 6 122 93 55 60.8003 60.8023 51.9003 SL 70 FB 78 70 59 58 10.5 6 137 108 70 60.8004 60.8024 51.9004 SL 82 FB 88.5 82 59 68 10.5 6 149 120 82 60.8005 60.8025 51.9005 SL 100 FB 108 100 59 85 10.5 8 167 138 100 60.8006 60.8026 51.9006 SL 125 FB 134 125 59 110 10.5 8 192 163 125 60.8007 60.8027 51.9007 SL 150 FB 159 150 72 135 10.5 8 217 188 159 60.8008 60.8028 51.9008


green protective coating,for steel pipes

1) steel EN 10216-1/10210 - DIN (2448) St. 52-3N2) stainless steel EN 10216-5 ASTM A812 - WNR 1.4571

CDW seam welded

pipe inlet rounded off pipe inlet rounded off

type code

type code

Aluminum conduit sleeves EN AW-6060 T66 are available on request

WE CARE

QUALITY, DURABILITY & FUNCTIONALITY LONG-TERM VIABILITY AND INTEGRITYLOWEST TOTAL COST OF OWNERSHIP

SLIPSIL® SEALING PLUGSfor single pipe (steel, copper, GRE, plastic) and cable transits

preferably installed in SLIPSIL® conduit sleevesease of installation and optimum tightness

click on the link below to view the installation video at: http://www.beele.com/marine/slipsil-sealing-plug

lubricate and push - “that’s it”simple - effective - fire, gas & watertight

SLIPSIL® exact fitting conduit sleeves with shoulder for ease of installation. Shoulder prevents the plugs from being inserted too deep or unevenly. Tightness ratings optimized by exact fitting sizes and the treated inner surface of the conduit sleeves.

NOTE: CONSULT THE RELEVANT CERTIFICATES/APPROVALS WITH THE STAMPED INSTALLATION DRAWINGS.

cable/ plug article pipe type numberdiameter

blind 41/0 40.10005-6 41/5-6 40.10056-7 41/6-7 40.10067-8 41/7-8 40.10078-9 41/8-9 40.10089-10 41/9-10 40.100910-11 41/10-11 40.101011-12 41/11-12 40.101112-14 41/12-14 40.101214-16 41/14-16 40.101316-18 41/16-18 40.101418-20 41/18-20 40.101520-22 41/20-22 40.101622-23 41/22-23 40.101723-24 41/23-24 40.101824-25 41/24-25 40.101925 41/22-23 40.1020

blind 55/0 40.14006-7 55/6-7 40.14057-8 55/7-8 40.14068-9 55/8-9 40.14079-10 55/9-10 40.140810-12 55/10-12 40.140912-14 55/12-14 40.141014-16 55/14-16 40.141116-18 55/16-18 40.141218-20 55/18-20 40.141320-22 55/20-22 40.141422-24 55/22-24 40.141524-26 55/24-26 40.141626-28 55/26-28 40.141728-30 55/28-30 40.141830-31 55/30-31 40.1419 31-32 55/31-32 40.142032-33 55/32-33 40.142133-34 55/33-34 40.142234 55/34 40.1423

blind 70/0 40.200020-22 70/20-22 40.201422-24 70/22-24 40.201524-26 70/24-26 40.201626-28 70/26-28 40.201728-30 70/28-30 40.201830-32 70/30-32 40.201932-34 70/32-34 40.202034-36 70/34-36 40.202136-38 70/36-38 40.202238-40 70/38-40 40.202340-42 70/40-42 40.202442-44 70/42-44 40.202544-46 70/44-46 40.202646-48 70/46-48 40.202748-50 70/48-50 40.202850 70/50 40.2029

blind 80/0 40.230028-30 80/28-30 40.231830-32 80/30-32 40.231932-34 80/32-34 40.232034-36 80/34-36 40.232136-38 80/36-38 40.232238-40 80/38-40 40.232340-42 80/40-42 40.232442-44 80/42-44 40.232544-46 80/44-46 40.232646-48 80/46-48 40.232748-50 80/48-50 40.232850-52 80/50-52 40.232952-54 80/52-54 40.233054-56 80/54-56 40.233156-58 80/56-58 40.233258-60 80/58-60 40.233360 80/60 40.2334


blind 100/0 40.280040-42 100/40-42 40.282042-44 100/42-44 40.282144-46 100/44-46 40.282246-48 100/46-48 40.282348-50 100/48-50 40.282450-52 100/50-52 40.282552-54 100/52-54 40.282654-56 100/54-56 40.282756-58 100/56-58 40.282858-60 100/58-60 40.282960-62 100/60-62 40.283062-64 100/62-64 40.283164-66 100/64-66 40.283266-68 100/66-68 40.283368-70 100/68-70 40.283470-72 100/70-72 40.283572-74 100/72-74 40.283674-75 100/74-75 40.283775 100/75 40.2838

blind 125/0 40.360060-62 125/60-62 40.363062-64 125/62-64 40.363164-66 125/64-66 40.363266-68 125/66-68 40.363368-70 125/68-70 40.363470-72 125/70-72 40.363572-74 125/72-74 40.363674-76 125/74-76 40.363776-78 125/76-78 40.363878-80 125/78-80 40.363980-82 125/80-82 40.364082-84 125/82-84 40.364184-86 125/84-86 40.364286-88 125/86-88 40.364388-90 125/88-90 40.364490-92 125/90-92 40.364592 125/92 40.3646

blind 150/0 40.400088-90 150/88-90 40.402090-92 150/90-92 40.402192-94 150/92-94 40.402294-96 150/94-96 40.402396-98 150/96-98 40.402498-100 150/98-100 40.4025100-102 150/100-102 40.4026102-104 150/102-104 40.4027104-106 150/104-106 40.4028106-108 150/106-108 40.4029108-110 150/108-110 40.4030110-112 150/110-112 40.4031112-114 150/112-114 40.4032114-116 150/114-116 40.4033116-118 150/116-118 40.4034118-120 150/118-120 40.4035120-122 150/120-122 40.4036122-124 150/122-124 40.4037124-125 150/124-125 40.4038125 150/125 40.4039

Application in conduit sleeves without shoulder

blind 37/0 40.08005-6 37/5-6 40.08056-7 37/6-7 40.08067-8 37/7-8 40.08078-9 37/8-9 40.08089-10 37/9-10 40.080910-11 37/10-11 40.081011-12 37/11-12 40.081112-13 37/12-13 40.081213-14 37/5-6 40.0813


14-15 37/6-7 40.081415-16 37/7-8 40.081516-17 37/8-9 40.081617-18 37/9-10 40.081718-19 37/10-11 40.081819-20 37/11-12 40.081920 37/12-13 40.0820

blind 107/0 40.320040-42 107/40-42 40.322042-44 107/42-44 40.322144-46 107/44-46 40.322246-48 107/46-48 40.322348-50 107/48-50 40.322450-52 107/50-52 40.322552-54 107/52-54 40.322654-56 107/54-56 40.322756-58 107/56-58 40.322858-60 107/58-60 40.322960-62 107/60-62 40.323062-64 107/62-64 40.323164-66 107/64-66 40.323266-68 107/66-68 40.323368-70 107/68-70 40.323470-72 107/70-72 40.323572-74 107/72-74 40.323674-75 107/74-75 40.323775-76 107/75-76 40.323876 107/76 40.3239

blind 131/0 40.380060-62 131/60-62 40.383062-64 131/62-64 40.383164-66 131/64-66 40.383266-68 131/66-68 40.383368-70 131/68-70 40.383470-72 131/70-72 40.383572-74 131/72-74 40.383674-76 131/74-76 40.383776-78 131/76-78 40.383878-80 131/78-80 40.383980-82 131/80-82 40.384082-84 131/82-84 40.384184-86 131/84-86 40.384286-88 131/86-88 40.388388-90 131/88-90 40.384490-92 131/90-92 40.384592 131/92 40.3846

blind 160/0 40.440088-90 160/88-90 40.442090-92 160/90-92 40.442192-94 160/92-94 40.442294-96 160/94-96 40.442396-98 160/96-98 40.442498-100 160/98-100 40.4425100-102 160/100-102 40.4426102-104 160/102-104 40.4427104-106 160/104-106 40.4428106-108 160/106-108 40.4429108-110 160/108-110 40.4430110-112 160/110-112 40.4431112-114 160/112-114 40.4432114-116 160/114-116 40.4433116-118 160/116-118 40.4434118-120 160/118-120 40.4435120-122 160/120-122 40.4436122-124 160/122-124 40.4437124-125 160/124-125 40.4438125 160/125 40.4439

133 207/133 40.4831139 207/139 40.4833159 207/159 40.4843168 207/168 40.4848

WE CARE


SLIPSIL® sealing plugs are available as multi-plug with 2, 3, 4 or 5 openings for ducting several pipes with the same diameter through a single conduit sleeve. The plugs consist of two, three or four segments. The segments have to be pushed into the conduit sleeve evenly. Plug series 41 up to 82.

Sometimes there is no access to allow insertion of the SLIPSIL® plugs from both sides of the conduit sleeve. A combination of DYNATITE® plugs and SLIPSIL® plugs allows installation from one side. Article numbers DYNATITE® plugs: use 45.xxxx instead of 40.xxxx.

SLIPSIL® MULTI-SEALING PLUGSfor ducting up to 5 same diameter cables/pipes through a conduit

specially developed for hydraulic and pneumatic lines fire rated - gas & watertight - certified

SLIPSIL®/DYNATITE® SEALING PLUGSfor penetrations where installation is possible from one side only

DYNATITE® plug fits inside the conduit; SLIPSIL® plug on top fire rated - gas & watertight - certified

Conduit sleeves without shoulder to be used

Preferably use SLIPSIL® exact fitting conduit sleeves with shoulder for ease of installation.



simple - effective - fire, gas & watertight

SLIPSIL® SEALING PLUGSSLIPSIL® sealing plugs with SLIPSIL® adapter plugs

developed for sealing oversized conduits for flanged pipes adapter is fittingly enclosed in the SLIPSIL® sealing plug

WE CARE


Adapters are available in sizes 40, 60, 80 and 100. They are used in combination with SLIPSIL® plugs. For instance a SLIPSIL® plug 100/60-62 with an adapter 60/18 to seal a pipe 18 mm OD in a conduit 100 mm ID. Since a SLIPSIL® plug 100/18-20 does not exist, sealing can be achieved by using an adapter.

Preferably use SLIPSIL® exact fitting conduit sleeves with shoulder for ease of installation.

lubricate and push - “that’s it”

WE CARE


SLIPSIL® SEALING PLUGSfire stop system for single plastic pipes max. 225 mm OD

insert CRUSHER® & seal off at both sides with SLIPSIL® plugsfire stop system with optimum water tightness


Conduit sleeves without shoulder to be used

Succesfully tested for application in bulkheads below deck offering water tightness after fire exposure.Fire tested in an A-0 bulkhead. Afterwards during >250 hours pressure tested up to 3 bar without any leakages.Max. pipe size 75 mm.


lubricate and push - “that’s it”


FIRAQUA® SEALING SYSTEMfor metallic & plastic pipes in watertight bulkheads below deck

fire stop system with proven water tightness after fire exposureonly sealing plugs for metallic pipes + CRUSHER® for plastic pipes

split crusher sleeve in front of the sealing system for fast reaction at the outbreak of a fire

Fire tested in an A-0 bulkhead Afterwards during >400 hours pressure tested up to 4 bar without any leakages.Metallic pipes max. 168.3 mm.

Plastic pipe transits tested >700 hours up to 4 bar. Pipe size max. 110 mm.

DYNATITE

configuration for metallic pipes

SLIPSIL® sealing plugsDYNATITE® sealing plug

Ongoing R&D to optimize these type of sealing systems offering water tightness after fire exposure.Survey/witnessing reports available.


RISE®/ULTRA CRUSHERS®

for exact fitting single plastic pipe conduits insert CRUSHER® & seal off at both sides with NOFIRNO® sealantA-class conduits for plastic pipes up to 160 mm OD - certified

simple - effective - symmetrical - fire from either side

CRUSHER®: exact fitting conduit sleeves for ease of installation


WE CARE


pipe CRUSHER article diameter type number

16 37/16-140 80.608216 37/16-160 80.608416 37/16-170 80.6085

18 37/18-140 80.609218 37/18-160 80.609418 37/18-170 80.6095

16 41/16-140 80.616216 41/16-160 80.616416 41/16-170 80.6125

18 41/18-140 80.617218 41/18-160 80.617418 41/18-170 80.6175

20 41/20-140 80.618220 41/20-160 80.618420 41/20-170 80.6185

25 41/25-140 80.619225 41/25-160 80.619425 41/25-170 80.6195

20 55/20-140 80.640220 55/20-160 80.640420 55/20-170 80.6405


25 55/25-140 80.641225 55/25-160 80.641425 55/25-170 80.6415

32 55/32-140 80.642232 55/32-160 80.6424 32 55/32-170 80.6425

32 70/32-140 80.653232 70/32-160 80.653432 70/32-170 80.6535

40 70/40-140 80.654240 70/40-160 80.654440 70/40-170 80.6545

50 70/50-140 80.655250 70/50-160 80.6554 50 70/50-170 80.6555

50 82/50-140 80.675250 82/50-160 80.675450 82/50-170 80.6755

63 82/63-140 80.677263 82/63-160 80.677463 82/63-170 80.6775


63 107/63-140 80.692263 107/63-160 80.694463 107/63-170 80.6945

75 107/75-140 80.693275 107/75-160 80.693475 107/75-170 80.6935

90 131/90-140 80.709290 131/90-160 80.709490 131/90-170 80.7095

110 160/110-140 80.7222110 160/110-160 80.7224110 160/110-170 80.7225

125 160/110-140 80.7242125 160/110-160 80.7244125 160/110-170 80.7245

140 207/140-160 80.7324140 207/140-170 80.7325140 207/140-190 80.7326

160 207/160-160 80.7334160 207/160-170 80.7335160 207/160-190 80.7336

very smooth inner wall with an exact fit for the CRUSHER® to be applied

A B

C

CRUSHER® conduit sleeve The combined CRUSHER® and NOFIRNO® sealing system is flexible to such an extent that almost any configuration of ducted plastic pipes can be sealed effectively for A-class penetrations. Also certified for a combination metallic and plastic pipes.

Insulated pipes, for instance as used for chilled water lines, can be ducted without interrupting the insulation when the combined CRUSHER® and NOFIRNO® system is applied. Condensation problems caused by interrupting the insulation of these pipes is a thing of the past.

Note: maximum continuous service temperature of the CRUSHER® not to exceed 70 °C. Consult our technical sup-port department in case of higher operating temperatures.

CRUSHER® type C-FIT

Series: 82Series: 82

type A B C art. no. art. no. C art. no. art. no. steel stainless steel stainless SL 37 WS-cr 42 37 180 60.8150 60.8160 250 60.8170 60.8180 SL 41 WS-cr 47 41 180 60.8151 60.8161 250 60.8171 60.8181 SL 55 WS-cr 60 55 180 60.8152 60.8162 250 60.8172 60.8182 SL 70 WS-cr 78 70 180 60.8153 60.8163 250 60.8173 60.8183 SL 82 WS-cr 88.5 82 180 60.8154 60.8164 250 60.8174 60.8184 SL 100 WS-cr 108 100 180 60.8155 60.8165 250 60.8175 60.8185 SL 107 WS-cr 114 107 180 60.8156 60.8166 250 60.8176 60.8186 SL 131 WS-cr 139 131 180 60.8157 60.8167 250 60.8177 60.8187 SL 159 WS-cr 168 160 180 60.8158 60.8168 250 60.8178 60.8188 SL 207 WS-cr 215 207 180 60.8159 60.8169 250 60.8179 60.8189

CRUSHER®/WRAP + NOFIRNO®

specially developed for chilled water lines no interruption of the insulation inside the penetration

A-class conduits for insulated steel and copper pipes - certified

CRUSHER® + NOFIRNO®

for ducting several plastic pipes with varying diameters CRUSHER® & NOFIRNO® filler sleeves & sealant - that’s all

A-class for multi-plastic pipe transits - certified



NOFIRNO® SEALING SYSTEMapproved for multi-pipe (steel, copper, GRE/GRP, plastic) transits

extremely fast and simple to install - space saving system for A-class conduit openings up to 1000x300 mm

click on the link below to view the installation video at: http://www.beele.com/marine/nofirno-multi-pipe-transits

WE CARE


NOFIRNO® fillersleeve article length number 18/12 single 140 80.500218/12 multi 140 80.505218/12 single 160 80.500318/12 multi 160 80.505318/12 single 210 80.500418/12 multi 210 80.5054

27/19 single 140 80.501227/19 multi 140 80.506227/19 single 160 80.501327/19 multi 160 80.506327/19 single 210 80.501427/19 multi 210 80.5064

ratio 27/19:18/12 = max. 2:1


fill & seal - “that’s it”simple - effective - fire, gas & watertight

NOFIRNO® fillersleeve article length number

22/15 multi 60 80.507022/15 multi 110 80.507122/15 multi 140 80.507222/15 multi 160 80.507322/15 multi 210 80.5074

artic

le n

umbe

r 50.

0102

01) colour red brown02) specific gravity 1.42 ± 0.03 g/cm3

03) curing of top layer 0.5 - 1 hour depending on temperature and air humidity04) service temperature -50 °C up to +180 °C05) tensile strength 1.5 MPa06) elongation at break ISO 37 50%07) elongation at shear >150%08) hardness 45 Shore A09) elastic deformation approx. 50%10) resistance UV, Ozone, arctic conditions11) aging more than 20 years12) supplied in 310 ml cartridges13) storage to be stored cool and dry min/max temperature = +5/+30° C14) storage life guaranteed 6 months; when applied later than 6 months after date of manufacturing, curing and adhesive properties have to be checked before application

NOFIRNO® multi-fillersleevestype 22/15

PRODUCT INFORMATION SEALANT

WE CARE


NOFIRNO® is a paste-like compound which is simple to use. NOFIRNO® has a balanced viscosity and can be applied overhead. After applying the sealant, it can be smoothed by means of a wet cloth or by hand. Because the sealant adheres very tightly, the cloth and hands should be wetted with water before use to prevent sealant from sticking to them.

Shelf life is 12 months when stored properly. Since we have no control on storage, we can only guarantee for 6 months.

NOFIRNO® GAP SEAL FOR FLOORS (project approved)NOFIRNO® multi-filler sleeves & sealant - fast and simple to install

no extra insulation - no invisible corrosion - long service life fire rated - watertight - blast & vibration proof - no aging

NOFIRNO® SEALING SYSTEMfor single pipe transits - centrically, off centre, angled or bent

extremely fast and simple to install - no corrosion inside the transitA-class, H-class and Jet Fire rated - watertight - certified

JET FIRE TESTED ACCORDING TO ISO 22899-1:2007 AND

ISO/CD 22899-2

The NOFIRNO® rubber grade has excellent properties and will not be consumed by the fire. The NOFIRNO® sealant immediately forms a protective layer and char when exposed to flames, in this way protecting the filling of the penetration seal. The thermal insulation is very high due to the endothermic properties of NOFIRNO® in combination with the air volume inside the penetration. The NOFIRNO® system has been subjected to A-0, H-0 and even Jet Fires without being severely affected. NOFIRNO® is absolutely HALOGEN FREE (tested according to Naval Engineering Standard NES 713: Issue 3). Furthermore, the NOFIRNO® rubber has a low smoke index (NES 711: Issue 2: 1981) and a high oxygen index (ISO 4589-2: 1996). Succesfully tested for flame spread acc. to IMO Resolution A.653(16).

only one type of filler sleeve instead of two:faster installation (no ratio 18/12 : 27/19)

simplifies material management


NOFIRNO® sealing system for upgradingsplit conduit sleeves/frames bolted to the bulkhead/deckNOFIRNO® gaskets, NOFIRNO® filler sleeves and sealant

steel pipes max. 273 mm OD - H-class tested


fill & seal - “that’s it”


NOFIRNO®: any shape of the split conduit sleeve/frame will do


RISE® MULTI-CABLE TRANSITSthe system of choice on many shipyards worldwide for 20 yearscompact - no special frames - no heavy compression - no aging fire rated - watertight - shock proof - bundled cables allowed

click on the link below to view the installation video at: http://www.beele.com/marine/rise-multi-cable-transits

NOFIRNO® MULTI-CABLE TRANSITS: system technology of RISE®.Evenhigherlevelsoffireratings,A-0andH-0classwithout the use of any insulation, A-60, H-120 and Jet Fire rated. NOFIRNO®fillersleevesandsealantinsteadofRISE® sleeves and FIWA®sealant.That’sall.

RISE® fillersleeve article length number 18/12 single 140 80.032318/12 multi 140 80.032418/12 single 160 80.031318/12 multi 160 80.031418/12 single 210 80.0303 27/19 single 140 80.032627/19 multi 140 80.032727/19 single 160 80.031627/19 multi 160 80.031727/19 single 210 80.0306

ratio 27/19:18/12 = max. 2:1


click on the link below to view the installation video at: http://www.beele.com/marine/rise-extender-frame

artic

le n

umbe

r 80.

0900

01) colour dark grey02) specific gravity 1.302 ± 0.03 g/cm3

03) curing of top layer 0.5 - 1 hour depending on temperature and air humidity04) service temperature -50 °C up to +180 °C05) tensile strength 1.15 MPa06) elongation at break ISO 37 50%07) elongation at shear >125%08) hardness 35 Shore A09) elastic deformation approx. 25%10) resistance UV, Ozone, arctic conditions11) aging more than 20 years12) supplied in 310 ml cartridges13) storage to be stored cool and dry min/max temperature = +5/+30° C14) storage life guaranteed 6 months; when applied later than 6 months after date of manufacturing, curing and adhesive properties have to be checked before application

RISE® cable sleeves

PRODUCT INFORMATION SEALANTRISE® EXTEND-A-FRAMES

the certified system for upgrading existing installationshigher filling capacity - improved fire ratings

also applicable for multi-frame (window) installations

RISE® and NOFIRNO® SEALING SYSTEMproven durability and serviceabilty

substantially reduced maintenance costsadding cables an easy job without the need to dismantle the system

Adding extra cables is an easy job. Cut away the sealant layer at both sides of the penetration with a plastic knife or a hollow punch in a tapering shape. Remove one or more RISE® or NOFIRNO® filler sleeves to create a fitting opening for the cable to be ducted. Place a RISE® sleeve around the newly ducted cable. Push the insert sleeve into the conduit. Refill the opening with sufficient FIWA® or NOFIRNO® sealant.RISE®/EXTENDER instantly doubles the usable space inside any block system transit frame! Eliminates the need for cutting new penetrations in valuable deck/bulkhead space! Position the EXTEND-A-FRAME around the bundle of cables, fix the extender in the existing frame and finish with the RISE® or NOFIRNO® system.

cable sleeves are supplied split lengthwise filler sleeves are supplied non-split

RISE® cable sleeve article sleeve article sleeve article sleeve diameter length number length number length number

12/6 5 - 7 140 80.0051 160 80.0100 210 80.0200 14/8 7 - 9 140 80.0052 160 80.0101 210 80.0201 16/10 9 - 11 140 80.0053 160 80.0102 210 80.0202 18/12 11 - 13 140 80.0054 160 80.0103 210 80.0203 20/14 13 - 15 140 80.0055 160 80.0104 210 80.0204 22/16 15 - 17 140 80.0056 160 80.0105 210 80.0205 27/19 17 - 21 140 80.0057 160 80.0106 210 80.0206 31/23 21 - 25 140 80.0058 160 80.0107 210 80.0207 35/27 25 - 29 140 80.0059 160 80.0108 210 80.0208 39/31 29 - 33 140 80.0060 160 80.0109 210 80.0209 46/36 33 - 39 140 80.0061 160 80.0110 210 80.0210 52/42 39 - 45 140 80.0062 160 80.0111 210 80.0211 58/48 45 - 51 140 80.0063 160 80.0112 210 80.0212 64/54 51 - 57 140 80.0064 160 80.0113 210 80.0213 70/60 57 - 63 140 80.0065 160 80.0114 210 80.0214

RISE® single/multifillersleeves


ACTIFOAM®/ULTRA GAP SEAL specially developed for gaps between stacked modules

ACTIFOAM® layered with RISE®/ULTRA rubber fitting to the gapextremely high thermal insulation under fire load - project approved

The ACTIFOAM®/ULTRA gap seals have been tested successfully for application in tunnels. After two hours exposure to more than 1200 °C, the temperature rise on the ACTIFOAM®/ULTRA was only 10 °C.Atthefireside,theNOFIRNO® sealant has formed its ceramic shield to protect the ACTIFOAM®/ULTRA. No smoke escaped at the unexposed during the full 135 minutes of testing. The maximum height tested is 130 mm. The system has been applied in the Victoria Park tunnel in Auckland over its full length and vertically in between the concrete panels.ACTIFOAM®/ULTRA gap seals have also been tested for H-120 class and have been applied on the BP Valhall platform during construction at the yard in The Netherlands. Latelythesystemhasbeenappliedintheprofilesofthehatchesontheheli-deckof four patrol vessels of the Dutch Navy with a view to prevent burning kerosene from entering the spaces underneath in case of a crash of a helicopter.

BEELE Engineering bvBeunkdijk 11 - 7122 NZ AALTEN - THE NETHERLANDS

Tel. +31 543 461629 - Fax +31 543 461786 - E-mail: [email protected]

BEELE ENGINEERING:A COMPANY DEDICATED TO SAFETY

FOR OVER 40 YEARS

WE CARE

www.beele.com

PRODUCTS OF CHOICE: SEALING SYSTEMS … saving... · we care quality, durability & functionality...

Documents

Transcript of PRODUCTS OF CHOICE: SEALING SYSTEMS … saving... · we care quality, durability & functionality...