PRODUCTS FOR STRUCTURAL STRENGTHENING · 2018. 1. 12. · Products developed with MAPEI’s...
Transcript of PRODUCTS FOR STRUCTURAL STRENGTHENING · 2018. 1. 12. · Products developed with MAPEI’s...
• Primer
• Epoxy Adhesives
• Saturants
• Carbon Fiber Fabrics
• Glass Fiber Fabric
• Laminates
• Structural-Strengthening Cord
• Corrosion Protection
• Repair Epoxies
• Concrete Repair Mortars
• Coatings and Sealers
PRODUCTS FOR STRUCTURAL STRENGTHENING
1
TABLE OF CONTENTS
Introduction ..................................2
Technology Logos Index ...................3
PRODUCT INFORMATION
Primer
MapeWrap™ Primer 1 .......................... 4
Epoxy Adhesives
MapeWrap 11 ........................................ 4
MapeWrap 12........................................ 4
Saturants
MapeWrap 21........................................ 5
MapeWrap 31........................................ 5
MapeWrap 31 Slow Set ........................ 5
Carbon Fiber Fabrics
MapeWrap C Uni-Ax 300 ...................... 6
MapeWrap C Uni-Ax 600 ...................... 6
MapeWrap C Bi-Ax ................................ 6
MapeWrap C Quadri-Ax ........................ 7
Glass Fiber Fabric
MapeWrap G Uni-Ax ............................. 7
Laminates
Carboplate™ E 170 ................................ 7
Maperod ™ C ........................................ 8
Structural-Strengthening Cord
MapeWrap C Fiocco .............................. 8
Corrosion Protection
Mapefer ™ 1K ........................................ 8
Planibond ® 3C ...................................... 9
Mapeshield™ I ..................................... 9
Repair Epoxies
Planibond AE ........................................ 9
Planibond AE Fast ................................10
Epojet ™ ...............................................10
Concrete Repair Mortars
Planitop ® X ..........................................10
Planitop XS ..........................................11
Planitop 12 SR .....................................11
Planitop 15 ...........................................11
Planitop 21 ...........................................12
Coatings and Sealers
Mapelastic ® .........................................12
Elastocolor ® Primer WB ......................12
Elastocolor Flex ...................................13
Elastocolor Coat ..................................13
Elastocolor Paint ..................................13
2
Introduction
THE WORLD OF MAPEIOriginally established in
1937, today MAPEI is a
privately owned global
corporation headquartered
in Milan, Italy, with 81
subsidiaries including 70
plants in 32 countries. The
company specializes in
manufacturing chemical
products for building,
including waterproofing products, specialty mortars and admixtures
for concrete, products for the restoration of historic buildings, and
special decorative and protective coatings for concrete surfaces. In
addition, MAPEI is the world leader in the manufacturing of mortars,
grouts, adhesives and complementary products for the installation
of all types of floor and wall coverings. MAPEI Corporation, the
division responsible for supporting the North American markets,
is based in Deerfield Beach, Florida, and employs over 1,100 team
members – ranging from Manufacturing and R&D to Technical
Services and Sales.
SUPERIOR PRODUCTS
FULL-BREADTH PRODUCT LINES
MAPEI produces the most innovative products for the construction
market. Around 1,500 products (adhesives, sealants, mortars,
admixtures, latex, etc.) are manufactured in MAPEI’s plants, which
produce the world’s most
complete range of building
products. Diversified, high-
quality chemical products –
from powdered adhesives, to liquid and paste products, to polymers
– are created with the aim of meeting the requirements of more than
60,000 customers around the world.
SUPERIOR-QUALITY PRODUCTS
MAPEI is an ISO 9001-2000 certified company. Our products are
produced according to exacting standards, strictly adhering to
process and procedural guidelines with documented compliance.
This rigid production format is vigilantly followed to ensure that
every product is produced uniformly from batch to batch.
PROFESSIONAL SUPPORT NETWORK
KNOWLEDGEABLE SALES FORCE
MAPEI brings you the largest, most highly trained sales force within
the industry to serve your needs for product application/installation
recommendations. Our sales representatives
are focused on supporting you with product
knowledge, product demonstrations, product
information, marketing support materials and
other relevant tools to help you generate sales.
TECHNICAL EXPERTISE
An in-house Technical Services Call Center
responds to customers’ telephone inquiries with
answers to installation challenges in real time. In
addition, MAPEI can offer field support for job
start-ups, product training and on-site problem
resolution.
PRODUCTS FOR WOOD FLOORING
FLOOR COVERING INSTALLATION SYSTEMS
CONCRETE RESTORATION SYSTEMS
TILE & STONE INSTALLATION SYSTEMS
BELOW-GRADE WATERPROOFING SYSTEMS
PRODUCTS FOR STRUCTURAL STRENGTHENING
ADMIXTURES FOR CONCRETE
PRODUCTS FOR UNDERGROUND CONSTRUCTION
CEMENT ADDITIVES DIVISION
9 PRODUCT LINES
31-800-42-MAPEI (1-800-426-2734) • www.mapei.com1-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Technology Logos Index
CUSTOMER SERVICE PLUS
MAPEI’s standards for customer service are best-in-class. Our leadership includes such
service innovations as:
• Customer-friendly, efficient processes
• One-call resolution
• Employee commitment to effective customer dialog
INNOVATIVE RESEARCH & DEVELOPMENT
Worldwide, more than 12% of
MAPEI employees are involved in the
development of new technologies
and product innovations, keeping
our customers at the forefront of the
industry. The company has taken
the additional initiative of focusing
its R&D efforts on environmentally
sustainable solutions.
To remain on the cutting edge of
innovation, MAPEI reinvests 5% of its
annual revenues into researching and developing new products
and technologies; in particular, 70% of its R&D efforts are directed
to develop eco-sustainable and environmentally friendly products,
which meet LEED requirements.
BEST-BACKEDSM WARRANTY PROGRAM
To bring it all together, MAPEI complements the industry’s
best products with simple, easy-to-understand
requirements for a variety of warranty options.
Technology Logos IndexIntroduction
Products developed with MAPEI’s “green innovation” are LEED-compliant, helping to contribute valuable points toward LEED-certified projects.
MAPEI’s BioBlock technology has been added to select products to help protect them from mold and mildew.
Corrosion Inhibitor Enhanced repair mortars feature proprietary additives that fortify the passivation layer on embedded reinforcing steel, enhancing its resistance to corrosion.
Products featuring High-Hydrated Cement Technology (HCT™) offer high early strength, excellent workability, ultra fast curing, unmatched long-term durability and efflorescence-free curing.
MAPEI mortars with Easy Glide Technology offer extreme ease of application, yielding a buttery consistency that reduces fatigue during troweling.
MAPEI’s FastTrack Ready products reduce the required steps of an installation and/or perform more quickly than current technology.
CORROSIONINHIBITOR
4
Primer Epoxy Adhesives
Low-Viscosity, 100%-Solids Epoxy Resin Primer
MapeWrap Primer 1 is a 100%-solids, moisture-tolerant, low-viscosity, two-component epoxy resin that is used for priming concrete substrates prior to application of the MapeWrap system.
MapeWrap™ Primer 1
Product Code
Packaging
Structural Epoxy Putty Adhesive for Use with Structural Strengthening Systems
MapeWrap 11 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system. MapeWrap 11 is also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod™ C laminates.
MapeWrap™ 11
Structural Epoxy Putty Adhesive for Use in Hot Climates
MapeWrap 12 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in hot climates. MapeWrap 12 is also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod ™ C laminates.
MapeWrap™ 12
Product Code Packaging
U.S./ Canada 7324004B Kit: 1 U.S. gal. (3,79 L)
Product Code Packaging
U.S./ Canada 7320104B Kit: 1 U.S. gal. (3,79 L)
Product Code Packaging
U.S./ Canada 7321104B Kit: 1 U.S. gal. (3,79 L)
51-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Saturants
Epoxy AdhesivesSaturants
Primer
Low-Viscosity, 100%-Solids Epoxy Resin
MapeWrap 21 is a 100%-solids, moisture-tolerant, low-viscosity epoxy resin for impregnating MapeWrap composite system fabrics by a wet layup method immediately before they are placed. MapeWrap 21 may be applied by an automated saturation device or manually to provide complete encapsulation of both carbon and glass fiber fabrics.
Medium-Viscosity, 100%-Solids Epoxy Resin
MapeWrap 31 is a 100%-solids, moisture-tolerant, medium-viscosity epoxy resin used for impregnating MapeWrap composite system fabrics by a dry layup method. MapeWrap 31 was specially developed to saturate and encapsulate carbon and glass fiber fabrics.
Medium-Viscosity, 100%-Solids Epoxy Resin
MapeWrap 31 Slow-Set is a 100%-solids, moisture-tolerant, medium-viscosity epoxy resin primarily used for impregnating MapeWrap composite system fabrics by a dry layup method. MapeWrap 31 Slow-Set was specially developed to saturate and encapsulate carbon and glass fiber fabrics in hot climates.
MapeWrap™ 21 MapeWrap™ 31 MapeWrap™ 31 Slow-Set
Product Code Packaging
U.S./ Canada 40321000 Kit: 1 U.S. gal. (3,79 L)
Product Code Packaging
U.S./ Canada
403310007323003
Kit: 1 U.S. gal. (3,79 L)Kit: 0.5 U.S. gal. (1,89 L)
Product Code Packaging
U.S./ Canada 7323104 1 U.S. gal. (3,79 L)
6
Uni-Directional Carbon Fiber Fabric
MapeWrap C Uni-Ax 300 is a high-strength, unidirectional carbon fiber fabric that, when used with the MapeWrap family of two-component epoxy adhesives, forms an externally bonded fiber-reinforced polymer (FRP) reinforcement system engineered to increase the strength of existing structural elements. MapeWrap C Uni-Ax 300 is applied to the surface of structural members in buildings, parking garages, bridges, marine piles and other structures to contribute significant strength, without increasing the dead load supported by the structure.
MapeWrap™ C Uni-Ax 300
Product Code
Packaging
High-Strength, Uni-Directional Carbon Fiber Fabric
MapeWrap C Uni-Ax 600 is a high-strength, unidirectional carbon fiber fabric that, when used with the MapeWrap family of two-component epoxy adhesives, forms an externally bonded fiber-reinforced polymer (FRP) reinforcementsystem. MapeWrap C Uni-Ax 600 is part of an engineering solution that allows for an increase in the strength of structural elements without increasing the dead load supported by the structure. MapeWrap C Uni-Ax 600 has twice the weight to surface area and twice the thickness of MapeWrap C Uni-Ax 300.
MapeWrap™ C Uni-Ax 600
Balanced, High-Strength, Bi-Directional Carbon Fiber Fabric
MapeWrap C Bi-Ax is a bi-directional carbon fiber fabric with balanced weight and having a high modulus of elasticity and high tensile strength. MapeWrap C Bi-Ax is suitable for repairing concrete structures and for improving the flexural and shear strength of reinforced concrete elements. It is also used for the confinement of axial-loaded elements (columns, bridge piers, chimneys) subjected to compressive and bending stress, and for seismic strengthening in earthquake areas. MapeWrap C Bi-Ax is installed using the “wet-layup” system where the fabric is saturated immediately before placement and the “dry-layup” system where the fabric is saturated during application.
MapeWrap™ C Bi-Ax
Product Code Packaging
U.S./ Canada
7301550
7300550
Roll: MapeWrap C Uni-Ax 300, 15.75" x 164' (40 cm x 50,0 m)Roll: MapeWrap C Uni-Ax 300, 3.94" x 164' (10 cm x 50,0 m)
Product Code Packaging
U.S./ Canada
7303050 Roll: MapeWrap C Uni-Ax 600, 15.75" x 164' (40 cm x 50 m)
Product Code Packaging
U.S./ Canada
7305550 Roll: MapeWrap C Bi-Ax 230, 15.75" x 164' (40 cm x 50 m)
Carbon Fiber Fabrics
71-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Balanced, High-Strength, Quadri-Directional Carbon Fiber Fabric
MapeWrap C Quadri-Ax is a quadri-directional carbon fiber fabric especially suited for the strengthening of structural elements that are subjected to compressive and bending stress where the distribution of equal pressure lines are unknown, such as beam connections and axial-loaded concrete structures. It is also used for seismic strengthening of vaulted structures. MapeWrap C Quadri-Ax can be placed using two different methods: the “wet system” with the aid of a machine that helps the impregnation process before placement, and the “dry system” where the resin is hand-applied during installation.
High-Strength, Uni-Directional E-Glass Fiber Fabric
MapeWrap G Uni-Ax is a high-strength, unidirectional E-glass fiber fabric that, when used with the MapeWrap family of two-component epoxy adhesives, forms an externally bonded fiber-reinforced polymer (FRP) reinforcement system engineered to increase the strength of structural elements. When applied to the surface of structural members in buildings, parking garages, bridges, marine piles and other structures, MapeWrap G Uni-Ax improves the seismic performance of concrete columns, masonry and concrete walls, and concrete beam-column connections.
Pultruded Carbon Fiber Plate Pre-Impregnated in Epoxy-Based Resin
Carboplate E 170 is a range of pultruded carbon-fiber-reinforced polymer (CFRP) plates designed for external structural strengthening of existing concrete, wood, masonry and steel members. Carboplate E 170 is externally bonded onto the surface of the substrate to strengthen and stiffen existing structures, using an epoxy resin specifically designed for the application. Carboplate E 170 is protected on both sides by a plastic film, eliminating the need for solvent cleaning of the plates before installation.
MapeWrap™ C Quadri-Ax MapeWrap™ G Uni-Ax Carboplate™ E 170
Product Code Packaging
U.S./ Canada
7310050 Roll: MapeWrap C Quadri-Ax, 11.8" x 164' (30 cm x 50 m)
Product Code Packaging
U.S./ Canada
7303450 Roll: MapeWrap G Uni-Ax 900, 23.6" x 164' (60 cm x 50 m)
Product Code Packaging
U.S./ Canada
7330076 7330576 73299767330476733047773309767331076
Roll: 2" x 82' (50 mm x 25 m) Roll: 4" x 82' (100 mm x 25 m) Roll: 2" x 82' (50 mm x 25 m) Roll: 4" x 82' (100 mm x 25 m) Roll: 4"x 164' (100 mm x 50 m)Roll: 4.7" x 82' (120 mm x 25 m) Roll: 6" x 82' (150 mm x 25 m)
Glass Fiber
FabricLaminates
Glass Fiber FabricLam
inatesCarbon Fiber Fabrics
8
LaminatesStructural-
Strengthening Cord
Corrosion
Protection
Pultruded, High-Strength Carbon Fiber Rod Pre-Impregnated in Epoxy-Based Resin
Maperod C is a range of pultruded carbon fiber rods, with high tensile strength and a modulus of elasticity of 22.5 x 106 psi (155,000 N/mm²). After the plastic film is removed, the Maperod C “near surface-mounted” rods are used for structural repairs and strengthening of structural elements in reinforced concrete, brickwork, stone or volcanic ash that has been damaged by either physical/mechanical stresses or natural events. Maperod C may be used together with the fabrics from the MapeWrap™ range for stronger anchoring, particularly when flexural or shear strengthening operations are carried out.
Maperod ™ C
Uni-Directional Carbon Fiber Cord for Structural Strengthening
MapeWrap C Fiocco is a high-strength cord made from uni-directional carbon fiber threads, designed to be impregnated with MapeWrap 21 to provide structural restoration of concrete and masonry elements. MapeWrap C Fiocco is particularly suited for restoration of historical structures, including vaulted ceilings and walls of brick and stone facades. MapeWrap C Fiocco cords are available in diameters of 1/4" (6 mm), 5/16" (8 mm), 3/8" (10 mm) and 1/2" (12 mm), and in 32.8-foot (10-m) rolls.
MapeWrap™ C Fiocco
Product Code Packaging
U.S./ Canada
7315010731521073154107315610
Cord: 1/4” (6 mm)Cord: 5/16” (8 mm) Cord: 3/8” (10 mm)Cord: 1/2” (12 mm)
Product Code Packaging
U.S./ Canada
7339531 7339630
Rods: Maperod C 150/10, 3/8" x 19.68' (10 mm x 6 m) Rods: Maperod C 150/8, 5/16" x 19.68' (8 mm x 6 m)
Corrosion-Inhibiting Coating for Reinforcing Steel
Mapefer 1K is a one-component anticorrosion coating based on unique polymers, cementitious binders and corrosion inhibitors. Mapefer 1K is specially formulated for application on near-white reinforcing steel to inhibit oxidation and rust formation.
Mapefer™ 1K
Product Code Packaging
U.S./ Canada 276645 10 lbs. (4,54 kg)
CORROSIONINHIBITOR
91-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Repair Epoxies
Structural-Strengthening CordLam
inatesRepair Epoxies
Three-Component, Cementitious Corrosion Inhibitor and Bonding Agent
Planibond 3C is a three-component, cementitious, moisture-tolerant, water-based, epoxy-modified corrosion inhibitor and bonding agent.
Planibond® 3C
Product Code Packaging
U.S./ Canada
36364000
363440001964007B
Large kit (Parts A and B): 10.8 lbs. (4,90 kg)Part C: 44 lbs. (20,0 kg) Small kit: 1.74 U.S. gals. (6,59 L)
CORROSIONINHIBITOR
Pure Zinc Galvanic Anode
Mapeshield I is a pure zinc anode for cathodic protection of reinforcing steel against corrosion in new, reinforced structures as well as structures requiring repair.
Mapeshield ™ I
Product Code Packaging
U.S./ Canada
2099024 2099124 2099212 2099312
Mapeshield I 10/10, 24 per carton Mapeshield I 10/20, 24 per carton Mapeshield I 30/10, 12 per carton Mapeshield I 30/20, 12 per carton
High-Strength, Nonsag Epoxy Anchoring Gel
Planibond AE is a high-strength, moisture-tolerant, low-VOC, two-part, nonsag, epoxy anchoring gel designed for a wide variety of bonding and repair applications.
Planibond® AE
Product Code Packaging
U.S./ Canada
19615561961508
Dual cartridge: 20.3 U.S. oz. (600 mL) Kit: 2 U.S. gals. (7,57 L)
Corrosion Protection
10
Repair EpoxiesConcrete Repair
Mortars
Rapid-Setting, High-Strength, Epoxy Anchoring Gel
Planibond AE Fast is a rapid-setting, high-strength, moisture-tolerant, two-component, 100%-solids, epoxy anchoring gel designed for a wide variety of vertical/horizontal bonding and repair applications.
Planibond® AE Fast
Product Code Packaging
U.S./ Canada
19628561962808
Dual cartridge: 20.3 U.S. oz. (600 mL) Kit: 2 U.S. gals. (7,57 L)
High-Modulus, Low-Viscosity Epoxy Injection Resin for Crack Repair
For professional use only
Epojet is a high-strength, moisture-tolerant, two-component, 100%-solids, low-viscosity epoxy resin for pressure injection and sealing of cracks in structural concrete, masonry and wood. Epojet meets AASHTO M235 specifications; and USDA specifications for food-processing areas.
Epojet™
Product Code Packaging
U.S./ Canada
156154 156112
Dual cartridge: 13.5 U.S. oz. (399 mL) Kit: 3 U.S. gals. (11,4 L)
One-Component, Fast-Setting, Fiber-Reinforced, Vertical and Overhead Repair Mortar
Planitop X is a one-component, fiber-reinforced, shrinkage-compensated, high-early-strength, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor.
Planitop® X
Product Code
PackagingProduct Code Packaging
U.S./ Canada
12850000 12850010 12851000
Bag: 50 lbs. (22,7 kg) Bag: 10 lbs. (4,54 kg) Pail: 50 lbs. (22,7 kg)
CORROSIONINHIBITOR
111-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Concrete Repair Mortars
Repair Epoxies
One-Component, Fast-Setting, Extended-Working-Time, Vertical and Overhead Repair Mortar
Planitop XS is an extended-working-time variation of Planitop X. Shrinkage-compensated, fiber-reinforced, polymer-modified and containing a corrosion inhibitor, Planitop XS features Planitop X ’s outstanding workability and versatility.
Planitop® XS
CORROSIONINHIBITOR
Product Code Packaging
U.S. 13050000 13051000
Bag: 50 lbs. (22,7 kg) Pail: 50 lbs. (22,7 kg)
Canada 13050000 Bag: 50 lbs. (22,7 kg)
Sulfate-Resistant, Vertical, Overhead and Horizontal Repair Mortar with Silica Fume
Planitop 12 SR is a sulfate-resistant, one-component, shrinkage-compensated, cementitious repair mortar. Planitop 12 SR is fiber-reinforced and contains both silica fume and a corrosion inhibitor, and is intended for the repair of vertical, overhead and horizontal concrete surfaces.
Planitop® 12 SR
Product Code Packaging
U.S./ Canada 16756 Bag: 55 lbs. (24,9 kg)
CORROSIONINHIBITOR
Form-and-Pour, One-Component Repair Mortar
Planitop 15 is a one-component, shrinkage-compensated, cementitious, fiber-reinforced, fluid mortar. Planitop 15 contains a corrosion inhibitor and silica fume, and is well-suited for form-and-pour and form-and-pump applications where high early strength and flowability are required.
Planitop® 15
Product Code Packaging
U.S./ Canada 2015025 Bag: 55 lbs. (24,9 kg)
CORROSIONINHIBITOR
12
Coatings and Sealers
Flexible, Cementitious Membrane for Waterproofing and Protecting Concrete and Masonry
Mapelastic is a cementitious membrane that waterproofs concrete and masonry. It also offers protection against chemical attack from de-icing salts, sulfates, chlorides and carbon dioxide.
Mapelastic®
Product Code
PackagingProduct Code Packaging
U.S./ Canada
39251000 (Silver) 39252000 (White) 39257000
Part A, Bag: 50 lbs. (22,7 kg) Part A, Bag: 50 lbs. (22,7 kg) Part B, Jug: 2 U.S. gals. (7,57 L)
Concrete Repair
Mortars
Thin-Build, Two-Component Rendering Mortar
Planitop 21 is a thin-build, two-component, polymer-modified cementitious mortar.
Planitop® 21
Product Code Packaging
U.S./ Canada
17545000 4024004
Part A, Bag: 45.8 lbs. (20,8 kg)Part B, Jug: 1.05 U.S. gals. (3,97 L)
Water-Based, 100%-Acrylic Primer for Elastocolor Coatings
Elastocolor Primer WB is a water-based, 100%-acrylic primer for use with Elastocolor coatings. Elastocolor Primer WB improves adhesion on porous, dusting and new substrates.
Elastocolor® Primer WB
Product Code Packaging
U.S./ Canada 2559019 Pail: 5 U.S. gals. (18,9 L)
131-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Coatings and SealersConcrete Repair M
ortars
Water-Based, 100%-Acrylic, Elastomeric Waterproof Coating
Elastocolor Flex is an elastomeric, high-build, water-based, 100%-acrylic coating to protect and decorate above-grade, vertical concrete, masonry, stucco and EIFS systems.
Elastocolor® Flex
Water-Based, High-Build, 100%-Acrylic, Waterproof Coating
Elastocolor Coat is a water-based, high-build, 100%-acrylic coating designed to protect and decorate above-grade, vertical concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites and EIFS systems.
Elastocolor® Coat
Water-Based, 100%-Acrylic, High-Quality Coating
Elastocolor Paint is a high-quality, water-based, 100%-acrylic coating that forms a protective film for use on above-grade, concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites and EIFS systems.
Elastocolor® Paint
Product Code Packaging
U.S./ Canada
Smooth texture7UC0900197UC0910197UC092019Fine texture7UB0900197UB0910197UB092019
Pail: Pastel base, 5 U.S. gals. (18,9 L) Pail: Medium base, 5 U.S. gals. (18,9 L)Pail: Transparent base, 5 U.S. gals. (18,9 L)
Pail: Pastel base, 5 U.S. gals. (18,9 L) Pail: Medium base, 5 U.S. gals. (18,9 L) Pail: Transparent base, 5 U.S. gals. (18,9 L)
Product Code Packaging
U.S./ Canada
Smooth texture7UE0900197UE0910197UE092019Fine texture7UD0900197UD0910197UD092019
Pail: Pastel base, 5 U.S. gals. (18,9 L) Pail: Medium base, 5 U.S. gals. (18,9 L) Pail: Transparent base, 5 U.S. gals. (18,9 L)
Pail: Pastel base, 5 U.S. gals. (18,9 L) Pail: Medium base, 5 U.S. gals. (18,9 L) Pail: Transparent base, 5 U.S. gals. (18,9 L)
Product Code Packaging
U.S./ Canada
7UA0900197UA0910197UA092019
Pail: Pastel base, 5 U.S. gals. (18,9 L) Pail: Medium base, 5 U.S. gals. (18,9 L) Pail: Transparent base, 5 U.S. gals. (18,9 L)
M O L D A N D M I L D E W R E S I S TA N C EM O L D A N D M I L D E W R E S I S TA N C E
M O L D A N D M I L D E W R E S I S TA N C E
Keyword: MAPEI Americas
Gear up with
MAPEIGet in theKNOW
Download ourfree mobile app.
Stay up to date...with Realtà MAPEI Americas magazine and MAPEI Mail electronic newsletters.Subscribe to receive updates on new products, projects, industry news, events, promotions and more.
Go to www.mapei.com to subscribe.AMERICAS[ ]Realtà
MAPEI
ISSUE 23
Global projects • Residential solutions • Thixo technology mortars • Big 4 biohazards
MAPEI is trusted
in all categories
of construction
worldwide
16-1969 RMA23 - Full Issue_EN.indd 1
8/25/16 12:33 PM
80 years of quality and transparencyFor 80 years, we have been helping to improve people’s quality of life by developing chemical products for the construction industry. We are fully committed to working and operating with the utmost respect for ethics, health and safety, as well as social and environmental responsibility. Our emphasis has always been on innovation as a means of developing our products so that they meet our clients’ requirements and, at the same time, respect the needs of the environment.
INTEGRITYRESEARCH & DEVELOPMENT
VALUESSUSTAINABILITYHONESTY
RESPONSIBILITYCOLLABORATION
RESPECTPROFESSIONALISM
COMMITMENTETHICS
LOYALTY
MAPEI has manufactured chemical products for the construction industry since 1937 and, over the years, has become a point of reference for the global market. MAPEI’s long, proud history has always been closely connected to its capacity for groundbreaking research and innovation. And, thanks to the inherent quality and innovation of its products and technology, MAPEI is the ideal partner for designers, contractors, workmen and clients operating on prestigious, eco-sustainable projects and sites. We are proud to celebrate our significant milestone of 80 years in the construction industry.
MAPEI Headquarters of the Americas1144 East Newport Center Drive Deerfield Beach, Florida 33442 1-888-US-MAPEI (1-888-876-2734) / (954) 246-8888
Technical Services1-888-365-0614 (U.S. and Puerto Rico) 1-800-361-9309 (Canada)
Customer Service1-800-42-MAPEI (1-800-426-2734)
Services in Mexico0-1-800-MX-MAPEI (0-1-800-696-2734)
Copyright ©2017 by MAPEI Corporation (“MAPEI”) and all rights are reserved. All intellectual property rights and other information contained in this document are the exclusive property of MAPEI (or its parent or related companies), unless otherwise noted. No part of this document may be reproduced or transmitted in any form without the prior written consent of MAPEI.
Edition Date: January 1, 2017
PR: 8187 MKT: 16-2262 Printed in the USA.
Keyword: MAPEI Americas