12/19/2019

1

Z e r s p a n u n g s w e r k z e u g e v o m F e i n s t e n

ProductinformationNews 2020

Productextension 2020

News 2020

Ultramini - DT Line

Minicut - R/LS07

System DED

Broaching - System NV10

12/19/2019

2

Productinformation Ultramini

Ultramini – DT Line

Multifunction tools for drilling and boring

Ømin 2.9 – 7.7mm

Drilling depth (L1) up to 4 x ø

Including internal cooling

Productinformation Ultramini

Ultramini – DT Line

Tool holder with 4 clamping surface – 4 x 90°

Clamping with Torx screw

Available with ø 16 / ø19.05 / ø20 / ø22 – Length 60mm

Including internal cooling

Can be used also for the standard Ultramini program

12/19/2019

3

Productinformation Ultramini

Ultramini – DT Line

Insert including internal cooling

Attention: Clamping surface overhead!

Universal coating AL41F

Cutting depth ½ x ø possible by boringDrilling in the full material

Productinformation Ultramini

Ultramini DT Line - Competitors

Iscar - ø min 3.0 – 7.0PICCO MF - L1 up to max. 3 x ø

- without internal cooling

Simtek - ø min 3.7 – 8.0- L1 up to max. 4 x ø (ø7+8 only 3 x ø)- Good performance

Ceratizit - ø min 2.0 – 8.0 / L1 up to 4 x øEcoCut - additional adapter for clamping

- Big product range

12/19/2019

4

Productinformation Ultramini

Important selling points – DT Line

Prooven very good repeating accuracy

Very universal

Very deep cutting depth possible

Productinformation Minicut

Minicut – System R/LS07

Starting from ø 7.0mm

Inserts for boring, grooving, profiling, chamfering andthreading

12/19/2019

5

Productinformation Minicut

Minicut – System R/LS07

Special adapter for to clamp in the standard Ultraminiholder

Available length: 20 / 30 / 40 / 50 / 60mm

Productinformation Minicut

System R/LS07 – Important selling points

Higher lifetime because of sharp inserts

AL41F as standard coating

Price interesting steel tool holder

Not compatible with Horn Mini / compatible with SimtekDelta-Line

Very high repeating accuracy with +-0.015

Repeating service for carbide tool holder

Perfect alternative for applications where you use at themoment Ultramini with ø7.0mm

12/19/2019

6

Productinformation Minicut

Minicut – System R/LS07 - calculation example

10 x R050.7-50/AL41F = 41,20 €/Stk. 412,-10 x R07.1841.02/AL41F = 14.10 €/Stk. 141,-1 x 607.A06.50HM = 157,10 €/Stk. 157,10

total amount = 298,10

10 x R050.7-30/AL41F = 29,15 €/Stk. 291,5010 x R07.1841.02/AL41F = 14.10 €/Stk. 141,-1 x 607.A06.30HM = 146,70 €/Stk. 146,70

total amount = 287,70

Savings = 113,90 (with 10 pcs.)

Savings = 3,80 (with 10 pcs.)

Productinformation DED

System DED

Tool holder with screw for clamping

Perfect for special applications

12/19/2019

7

Productinformation DED

System DED – Typ 208

Tool holder with screw for clamping

Shank 16 x 16 and 20 x 20;

Productinformation DED

System DED – Typ 619

Tool holder with screw for clamping for face grooving

Shank 16 x 16 and 20 x 20; only in right hand versionavailable

12/19/2019

8

Productinformation DED

System DED – insert for face grooving

For tool holder type 619

Coating AL41F

Productinformation DED

System DED – Insert for Poly-V-profiles

Clamping with claw

Coating AL41F

12/19/2019

9

Productinformation Broaching

Broaching

Broaching on turning and milling machines

Complement – Optimisation - Extension

Productinformation Broaching

Broaching – Complement Toleranceclass D9

New: Tolerance D9

For all systems from NPU up to NPV

12/19/2019

10

Productinformation Broaching

Broaching – Extension overhang length (L2)

NHV.15.IK25.4 ømin=15 L2=75

NHV.22.0025.3 ømin=22 L2=105

NHV.30.0032.4 ømin=30 L2=150

NHV.38.0032.4 ømin=38 L2=165

NHV.45.0040.5 ømin=45 L2=205

Productinformation Broaching

Broaching – Extension hexagon socket / square bore

Tool holder including internal cooling – not interchangeable

Hexagon socket SW 13-20 and SW 20-32

Square bore 14 and 20

In AL41F available

12/19/2019

11

Productinformation Broaching

Broaching – Complement tool holder

Tool holder NHV – New with internal cooling

Will be upgraded within the next 12 month

Improvement of the life time about 30%

Extension new system NV10

Productinformation Broaching

Starting from ømin 10.0mm

Length of the tool holder with 22mm / 32mm / 42mm

Including internal cooling

Tolerance class P9 / JS9 / D9 – Coating AL41F

12/19/2019

12

Productinformation Broaching

Broaching – System NV10 - calculation example

5 x NP10.400.02.3/AL41F = 51,15 €/Stk. 255,751 x NH10.0025.1 = 156,90 €/Stk. 156,90

total amount = 412,65

5 x NV10.0401.02/AL41F = 26,, €/Stk. 130,-1 x NHV.10.IK25.3 = 169,80 €/Stk. 169,80

amount = 299,80

Savings by 5 inserts = 112,85 €

Productinformation Broaching

Broaching - Competitors

Paul Horn - Bad repeating accuracy- maximum width in standard =14.0mm

Simtek - Bad seating of the inserts- maximum width in standard =16.0mm

Hoffmann - maximum width in standard =25.0mm- No carbide insertsonly sintered steel with 70 HRC

12/19/2019

13

Z e r s p a n u n g s w e r k z e u g e v o m F e i n s t e n

Good luck with the new products!