Product Specifications

Component Specifications

Roof Shade Fly Option 1

• Flame Retardant - Knitted HDPE shade fabric offering UV block up to 917%, 370 + 5 gsm, 91% Shade, anti-rot.

• Delivers reduction in temperature of 7 degrees.• Colours available: Beige, Green, Sand,Sandstone,Silver,Black-silver

Roof Shade Fly Option 2• Flame Retardant - 900 gsm PVC coated Membrane Anti-UV, water proof and anti

rot.• Colours available: Pale Beige, Silver Grey, Grey, White

Roof Shade Fly option 3

• RHI all weather MK4 is manufactured from High Tenacity Polyester stretch fabric, coated with an elastomeric polymer coating that’s flame retarded and treated with anti-microbial agents and UV stabilizers.

• 750gsm, anti-fungal, anti-rot.

Mesh Fabric (Windows and Doors)

• 295 gsm, openness factor 35%, tensile strength 1800/2000 N/50mm, tear strength 350/400 N, temperature resistance -20°C / +70°C, translucence @ 550nm 40%, light fastness <6, seam strength (2cm Seam) 800 N/5cm, air permeability 7520 l/m2*sec.

Tent Body Canvas (Main Roof and Walls)

• Rhinotuff 12 FR: 50/50 Poly Cotton, weight - 490gsm, water column - 500mm, light fastness 7+,

• Rot resistant, Water Proof, Colour Fast, Fire retardant, Greener Footprint.• Colour: White, Sand, Red Sand, Khaki, Dark Grey Light Grey.

Frame (Structure)• To provide long term protection of rust, marine & severe marine conditions shall be

treated GZLP-E Hot Dip Galvanising in accordance with AS/NZS 4680• Steel members and fittings range in steel thickness from 2.9mm to 15mm.

Accessories

• Hot dip Galvanised earth anchors (Eco Anchors)• Tension straps• Storm straps• Glass doors• Pelmets.

Floor Bearers and Joist for external decking and Inter-nal Floor Substructure

• All floor substructure is 200C and 200 Zd purlins• Marine or severe marine conditions are to be cold form zinc treated• Minimum coating to be Z450 (450gsm).

Decking External

• Wood Plastic Composite decking• Designed for hard waring and low maintenance• Material Component 60% PE+30% Wood Powder+10% special additives• Colours available: Coffee, Charcoal and Grey

Product Specifications

Number Item Description

1 Product Name Wood Plastic Composite Decking

2 Dimension 140mm (W) x 24mm (T) ± 0.2mm

3 Length According to Customer Requirements

4 Color Charcoal, grey, coffee

5 Top side Reverse side

6 Material Component 60% PE+30% Wood Powder+10% special additives

7 Specific gravity 1.30 kg/m3

8 Weight 3.40 kg/m

9 Maximum Front Load-Bearing 3452N

10 Maximum Rear Load-Bearing 4219N

11 Top side Bearing Strength 17.758Mpa

12 Reverse side Bearing Strength 21.701Mpa

13 Top side Bearing Modulus 6431.727Mpa

14 Reverse side Bearing Modulus 3756.165Mpa

15 Warranty 5 years

16 Certificate ISO9001, ISO14001

Colour disclaimer - This chart is designed to help you get a better idea of our products and colour range and is designed to be used as a guide only. We have made every effort to make the colours and finishes on screen as close as possible to the colours and finishes of the products. However, we cannot guarantee an exact match in colours and finishes as the representation of colours, gloss levels, and textures are limited by technology and may vary due to screen and printer settings.

Wood Plastic Composite Decking

Charcoal Grey Coffee

Rhinotuff 8 FR Rhinotuff 12 FR

Composition 65/5 Poly Cotton 50/50 Poly Cotton

Yarn Warp / Weft Warp: NE 20s/2 RS CaWeft: NE 20s/2 RS Ca

Warp: NE 12s / 2 RSWeft: NE 12s / 2 RS

Weave Plain Plain

Threads / Inch Warp: 74Weft: 45

Warp: 58Weft: 38

Weight 380 gsm 490 gsm

Tensile Strength (Newton) Warp: 1600Weft: 1000

Warp: 2000Weft: 1350

Tearing Strength (Newton) Warp: 45Weft: 35

Warp: 70Weft 45

Shrinkage Warp / Weft

2 to 3%0.5%

Warp: 2 to 3%Weft: 0.5%

Water Column 550 mm 500 mm

Spray Rating 90% 80%

Flame Resistance Durable Durable

Light Fastness 7 + 7 +

Canvas Specifications

Rot Resistant | Water Proof | Water Repellent | Color Fast | Breathable | Fire Retardant | Greener Footprint

Colour disclaimer - This chart is designed to help you get a better idea of our products and colour range and is designed to be used as a guide only. We have made every effort to make the colours and finishes on screen as close as possible to the colours and finishes of the products. However, we cannot guarantee an exact match in colours and finishes as the representation of colours, gloss levels, and textures are limited by technology and may vary due to screen and printer settings.

FR White FR Sand FR Red Sand

FR Grey FR Dark Grey FR Khaki

Usage Heavy Domestic and Heavy Commercial

Size 203mm x 1219mm (8”x48”)

Thickness 5.0mm - micro bevelled

Wear Layer 0.55mm

Surface Finish PU - UV cured with Nano Silver anti-microbial coating

Composition RECYCLED PVC Fibreglass re-enforced

Board repeat 8 boards average

Qty per carton 8 planks = 17kg

M2 per carton 1.982m2

Luxury Vinyl Floor PlanksSpecifications

100% Recyclable | Quick & Easy to Install | Hard Wearing | Easy to Repair

Low Maintenance | Warm Underfoot | Quiet Underfoot

Colour disclaimer - This chart is designed to help you get a better idea of our products and colour range and is designed to be used as a guide only. We have made every effort to make the colours and finishes on screen as close as possible to the colours and finishes of the products. However, we cannot guarantee an exact match in colours and finishes as the representation of colours, gloss levels, and textures are limited by technology and may vary due to screen and printer settings.

Seville Malaga Grey Iron Bark

Scottish Grey Hazel Samoan Oak Murray River Black Butt

Barcelona Walnut Silver Wattle

Properties Units Test Method Average Value

Base Thread Density Denier DIN 53350 1000*1000D

Base Fabric Density Thread / inch DIN 53351 23*23

Finished Fabric Weight Gram / m2 DIN 53352 750

Base Fabric Weight Gram / m2 DIN 53352 200

Thickness - Finished Product Um DIN 53352 60

Break Strength Warp N / 5cm GB / T1040 3000

Break Strength Weft N / 5cm GB / T1040 2800

Tear Strength Warp N / 5cm DIN 53363 300

Tear Strength Weft N / 5cm DIN 53363 270

Adhesion N / 5cm DIN 53357 120

Temperature Range °C DIN 53368 -20 ~ +70

Flame Retardancy B2, B1, M1, M2 Self - extinguishing Acrylic

Colour disclaimer - This chart is designed to help you get a better idea of our products and colour range and is designed to be used as a guide only. We have made every effort to make the colours and finishes on screen as close as possible to the colours and finishes of the products. However, we cannot guarantee an exact match in colours and finishes as the representation of colours, gloss levels, and textures are limited by technology and may vary due to screen and printer settings.

Pale BeigeRAL 1001

Silver GreyRAL 7001

Tarpaulin GreyRAL 7010

Pure WhiteRAL 9010

750 gsm PVC Knife Coated fabric Anti-UV

Properties Units Test Method Average Value

Base Thread Density Denier DIN 53350 1000*1000D

Base Fabric Density Thread / inch DIN 53351 30*30Panama

Finished Fabric Weight Gram / m2 DIN 53352 900

Base Fabric Weight Gram / m2 DIN 53352 265

Thickness - Finished Product Um DIN 53352 72

Break Strength Warp N / 5cm GB / T1040 4000

Break Strength Weft N / 5cm GB / T1040 3800

Tear Strength Warp N / 5cm DIN 53363 550

Tear Strength Weft N / 5cm DIN 53363 550

Adhesion N / 5cm DIN 53357 120

Temperature Range °C DIN 53368 -20 ~ +70

Flame Retardancy B2, B1, M1, M2 Self - extinguishing Acrylic both sides

Colour disclaimer - This chart is designed to help you get a better idea of our products and colour range and is designed to be used as a guide only. We have made every effort to make the colours and finishes on screen as close as possible to the colours and finishes of the products. However, we cannot guarantee an exact match in colours and finishes as the representation of colours, gloss levels, and textures are limited by technology and may vary due to screen and printer settings.

900 gsm PVC coated Membrane Anti-UV

Pale BeigeRAL 1001

Silver GreyRAL 7001

Tarpaulin GreyRAL 7010

Pure WhiteRAL 9010