PRODUCT SPECIFICATION FOR APPROVAL Sheets/Panasonic Switches PDFs/ERZ-VF.pdfMeasuring the varistor...
Transcript of PRODUCT SPECIFICATION FOR APPROVAL Sheets/Panasonic Switches PDFs/ERZ-VF.pdfMeasuring the varistor...
To: DIGI-KEY Corporation Issue No. : ERZ3282124
Date of Issue :
Classification : n New o Changed
: ZNR SURGE ABSORBER: ERZVF2M□□□ ( 220~471 )
:
: Japan
: OTHER INDUSTRIAL EQUIPMENTS
※If you approve this specification, please fill in and sign the below and return 1copy to us.
:
:
:
(signature)
:
:
Prepared by : Engineering Section
Capacitor Business Unit Phone : +81-123-22-8768 (Direct)
Matsushita Electronic Components Co.,Ltd. Fax : +81-123-22-9484 (Direct)
25.Kohata-nishinaka..Uji City , Kyoto, Japan Contact Person :
Signature
Title : Engineer
Phone : +81-774-31-5818(Representative) Authorized by :
Fax : +81-774-33-4251 Signature
Title : Manager of Engineering
If there is a question, please ask the engineering section about it directly.
May 31.2004
Product Description
Product Part Number
Customers Part Number
Country of Origin
Applications
Approval No
Approval Date
Excecuted by
Title
Dept.
PRODUCT SPECIFICATION FOR APPROVAL
CLASSIFICATION No.
151S-ERZ-MA14- VFM000
SUBJECT PAGE 1 - 7
PART NUMBER DATE April 1 , 2003
1. Structure
1.1 Appearance without dirt and crack, marking should be clear
W # (1)
L # (1)
H # (1)
S # (1)
Dimensions E # (1)
(Unit ; mm)
1.4 ERZVF1M□□□ (Bulk)
ERZVF2M□□□ (Embossed Taping)
# (1) See Page2-7, TABLE - 1 Dimensions
2. Electrical Requirements
Item Requirements Test Specifications
2.1 Max. Allowable Voltage AC : # (2) Vrms
DC : # (2) V
2.2 Rated wattage # (2) W
2.3 Varistor Voltage V 1 : # (2) V Measuring current : 1 mA DC
2.4 Clamping Voltage # (2) V max. Measuring current : # (2)
Impulse wave from : 8/20 micro s
2.5 Maximum Peak Current # (2) A Impulse wave from : 8/20 micro s , 2 pulse
(Withstanding surge current) at interval of 5 min.
2.6 Maximum Energy # (2) J Impulse wave from : 2ms, 1 pulse
2.7 Temperature Coefficient of 0 ~ -0.05 % / deg.C Measured voltage : V 1
Varistor Voltage Temp. range : +25 deg.C ~ +85 deg.C
2.8 Impulse life I Varistor voltage change +/- 10 % Impulse wave from : 8/20 micro s at # (2) A
(Surge life I) Applied condition : 104 times at interval 10 s
2.9 Impulse life II Varistor voltage change +/- 10% Impulse wave from : 8/20 micro s at # (2) A
(Surge life II) Applied condition : 105 times at interval 10 s
# (2) See Page3-7, TABLE - 2 Standard Products Table
Note / Revision
APPROVAL CHECK DESIGN
MATSUSHITA ELECTRONIC COMPONENTS CO., LTD.
Packing
1.3 Marking
SPECIFICATIONS
ZNR SURGE ABSORBERS SMD MOLD VFM TYPE
1.2
ERZVF1M□□□ (Bulk) , ERZVF2M□□□ (Taping)
Trade Mark, ZNR, Abbreviation of Part No., Date Code
H
E
WL
S S
Z N R
V F M□□□
M
CLASSIFICATION No.
151S-ERZ-MA14- VFM000
SUBJECT
PART NUMBER 2 - 7
TABLE - 1 Dimensions
Part Number W L H S
Unit : mm
□ : This symbol shows a packaging form. ( 1 or 2 )
Note / Revision
ERZVF□M431
ERZVF□M471
6.0 +/- 0.4
ERZVF1M□□□ (Bulk) , ERZVF2M□□□ (Taping)
8.0 +/- 0.5 3.2 +/- 0.3 1.3 +/- 0.3
ERZVF□M270
ERZVF□M330
ERZVF□M470
2.5 +/- 0.2
ERZVF□M331
ERZVF□M361
ERZVF□M391
ERZVF□M201
ERZVF□M221
ERZVF□M241
ERZVF□M271
ERZVF□M121
ERZVF□M151
SPECIFICATIONS
ZNR SURGE ABSORBERS SMD MOLD VFM TYPE
E
ERZVF□M220
ERZVF□M390
ERZVF□M560
ERZVF□M820
ERZVF□M101
ERZVF□M680
CLASSIFICATION No.
151S-ERZ-MA14- VFM000
SUBJECT
PART NUMBER 3 - 7
TABLE - 2 Standard Products Table
ERZVF□M220 ~ ERZVF□M680
Part Number
Ⅰ Ⅱ
V1mA (V) V2.5A (V) (A) (J) (A) (A)
22 ( 20~ 24) 43 0.9 18.0 12.0
27 ( 24~ 30) 53 1.0 18.0 12.0
33 ( 30~ 36) 65 1.2 18.0 12.0
39 ( 35~ 43) 77 1.5 18.0 12.0
47 ( 42~ 52) 93 1.8 18.0 12.0
56 ( 50~ 62) 110 2.2 18.0 12.0
68 ( 61~ 75) 135 2.5 18.0 12.0
ERZVF□M820 ~ ERZVF□M471
Part Number
Ⅰ Ⅱ
V1mA (V) V10A (V) (A) (J) (A) (A)
50 65 82 ( 74~ 90) 135 600 3.5 50.0 35.0
60 85 100 ( 90~110) 165 600 4.0 50.0 35.0
75 100 120 (108~132) 200 600 5.0 50.0 35.0
95 125 150 (135~165) 250 600 6.0 50.0 35.0
130 170 200 (185~225) 340 600 8.0 50.0 35.0
140 180 220 (198~242) 360 600 9.0 50.0 35.0
150 200 240 (216~264) 395 600 10.0 50.0 35.0
175 225 270 (247~303) 455 600 12.0 50.0 35.0
330(297~363) 545 300 8.0 30.0 20.0
360(324~396) 595 300 9.0 30.0 20.0
390(351~429) 650 300 9.0 30.0 20.0
430(387~473) 710 300 10.0 30.0 20.0
470(423~517) 775 300 10.0 30.0 20.0
□ : This symbol shows a packaging form. ( 1 or 2 )
Note / Revision
ERZVF□M471 300 385 0.1
ERZVF□M431 275 350 0.1
ERZVF□M391 250 320 0.1
ERZVF□M361 230 300 0.1
ERZVF□M331 210 270 0.1
ERZVF□M241 0.25
ERZVF□M271 0.25
ERZVF□M201 0.25
ERZVF□M221 0.25
ERZVF□M121 0.25
ERZVF□M151 0.25
ERZVF□M820 0.25
ERZVF□M101 0.25
Voltage
ACrms (V) DC (V) (W)
Maximum Maximum Impulse life
Allowable Wattage Voltage Voltage Peak Current Energy (Surge life)
Maximum Rated Varistor Clamping
30
35
40
ERZVF1M□□□ (Bulk) , ERZVF2M□□□ (Taping)
20
ERZVF□M220
ERZVF□M270
25
ACrms (V)
14
17
Allowable
Voltage
0.02
0.02
(Surge life)
Maximum
Energy
Rated
Wattage
Varistor
Voltage Voltage
Maximum
Peak Current
Clamping Impulse life
125
125
125
125
0.02
125
SPECIFICATIONS
ZNR SURGE ABSORBERS SMD MOLD VFM TYPE
38
45
DC (V) (W)
0.02
Maximum
ERZVF□M680
ERZVF□M330
ERZVF□M390
ERZVF□M470
ERZVF□M560
56
125
125
18
22
26
31
0.02
0.02
0.02
CLASSIFICATION No.
151S-ERZ-MA14- VFM000
SUBJECT
PART NUMBER 4 - 7
3. Mechanical Requirements
No. Item Requirements Test Specifications
3.1 Electrode Adhesion No outstanding damage Applied force : 5 N
Strength Applied time : 5 +/- 1 sec.
3.2 Terminal Bending No outstanding damage Bending width : 1 mm
Strength Applied time : 30 +/- 1 sec.
3.3 Vibration No outstanding damage Frequency : 10 ~ 55 Hz
Amplitude : 0.75 mm
3.4 Solderability Approximately 75 % of the terminal Solder temp. : 235 +/- 5 deg.C
should be covered with new solder Immersed time : 2 +/- 0.5 sec.
3.5 Resistance to Soldering Max. varistor voltage change +/- 5 % Solder temp. : 260 +/- 5 deg.C
Heat Immersed time : 5 +/- 0.5 sec.
4. Environmental Requirements
4.1 High Temperature Storage Max. varistor voltage change +/- 5 % Ambient Temp. : 125 +/- 2 deg.C
(Dry Heat) Time : 1000 hours
4.2 Damp heat Max. varistor voltage change +/- 5 % Ambient Condition : 40 +/- 2 deg.C
90 ~ 95 % RH
Time : 1000 hours
4.3 Low Temperature Storage Max. varistor voltage change +/- 5 % Ambient Temp. : -40 +/- 2 deg.C
(Cold) Time : 1000 hours
Step Temp.(deg.C) Period (minutes)
Max. varistor voltage change +/- 5 % 1 -40 +/- 3 deg.C
4.4 Heat Cycle 2 Room temperature
No outstanding damage 3 +85 +/- 2 deg.C
4 Room temperature
5 Cycle
4.5 High Temperature Load Max. varistor voltage change +/- 10 % Ambient Temp. : 85 +/- 2 deg.C
(Dry Heat Load) Time : 1000 hours
4.6 Damp Heat Load Max. varistor voltage change +/- 10 % Ambient Condition : 40 +/- 2deg.C
90 ~ 95% RH
Time : 1000 hours
Operating Temperature Range -40 deg.C ~ +85 deg.C
Storage Temperature Range -40 deg.C ~ +125 deg.C
Note / Revision
SPECIFICATIONS
15 +/- 3
ZNR SURGE ABSORBERS SMD MOLD VFM TYPE
30 +/- 3
15 +/- 3
30 +/- 3
ERZVF1M□□□ (Bulk) , ERZVF2M□□□ (Taping)
CLASSIFICATION No.
151S-ERZ-MA14- VF000
SUBJECT
5 - 7
2. Electrical Requirements
No. Item Test Method
Standard Test Condition Environmental conditions under which every measuring is done without doubt
on the measuring results. Unless specially, specified, temperature, relative humidity are
5 deg.C to 35 deg.C, 45 to 85% RH respectively.
2.1 Maximum Allowable The maximum Sine wave voltage (rms) that can be applied continuously or
Voltage maximum DC voltage in the specified environmental temperature range.
2.2 Rated Wattage The maximum power to be loaded with in the specified environmental temperature range.
2.3 Varistor Voltage Voltage between both terminals of ZNR measured when CmA of DC current is
applied under standard conditions. It is called Vc. Measuring the varistor voltage
Should be made promptly to avoid heat affection.
2.4 Clamping Voltage The maximum voltage between two terminals with the specified impulse current
(8/20 micro s).
2.5 Maximum Peak Current The maximum current within the varistor voltage change of +/- 10% with the standard
(Withstanding Surge Current) impulse current (8/20 micro s) applied by the specified condition.
2.6 Maximum Energy The maximum energy within the varistor voltage change of +/- 10% with the specified
impulse is applied.
2.7 Temperature Coefficient of The varistor voltage shall be measured at 25 deg.C and 85 deg.C with a DC current of 1mA.
Varistor Voltage The temperature coefficient of varistor voltage V1 is calculated by the following equation :
T.C. (% / deg.C) = * 1 / 60 * 100
2.8 Impulse life I After the specified impulse is applied 10000 times continuously with the interval 10 seconds
( Surge life I ) at room temperature, the specimen shall be stored at room temperature and humidity for
1 to 2 hours. Thereafter, the change of Vc shall be measured.
2.9 Impulse life II After the specified impulse is applied 100000 times continuously with the interval 10 seconds
( Surge life II ) at room temperature, the specimen shall be stored at room temperature and humidity for
1 to 2 hours. Thereafter, the change of Vc shall be measured.
Note / Revision
ZNR SURGE ABSORBERS SMD MOLD VF TYPE
TEST METHOD
SPECIFICATIONS
V1 at 85 deg.C - V1 at 25 deg.C
V1 at 25 deg.C
CLASSIFICATION No.
151S-ERZ-MA14- VF000
SUBJECT
6 - 7
3. Mechanical Requirements
No. Item Test Method
After soldering the varistor on the substrate as shown in Fig.A, a specified force of
5N which is parallel to the plate of the substrate shall be applied for a period of
5 +/- 1 seconds, and the point for application of the force shall be at the center of
varistor body as shown in Fig.A. The varistor shall be then visually examined
in the mounted state.
Fig.ASubstrate Electrode Adhesion method
3.1 Electrode Adhesion
Strength
Material ------- glass-epoxy
Thickness ------- 1.6mm
------- Copper foil land ( Thickness ; 0.035mm )
------- Solder resist
After soldering the varistor on the substrate as shown in Fig.B. Bending of 1mm
shall be applied for bending speed of 1mm/s and the point for application of
the bending force shall be at the center of substrate as shown in Fig.B.
The bending force shall be maintained for a period of 30 +/- 1seconds.
Fig.BSubstrate Bending method
3.2 Terminal Bending
Strength
Material ------- glass - epoxy
Thickness ------- 1.6mm
------- Copper foil land ( Thickness ; 0.035mm )
------- Solder resist
Note / Revision
ZNR SURGE ABSORBERS SMD MOLD VF TYPE
TEST METHOD
SPECIFICATIONS
CLASSIFICATION No.
151S-ERZ-MA14- VF000
SUBJECT
7 - 7
No. Item Test Method
3.3 Vibration After repeatedly applying a single harmonic vibration (amplitude ; 0.75mm ;
double amplitude ; 1.5mm with 1 minute vibration frequency cycles (10Hz ~ 55Hz ~ 10Hz)
to each of three perpendicular directions for 2 hours. The varistor shall then be
visually examined.
3.4 Solderability The external electrode of varistor shall be immersed completely in the solder bath.
The temperature of the solder shall be 235 +/- 5 deg.C, and the immersion time shall be
2 +/- 0.5 seconds. The varistor shall be visually examined.
Notes : Solder ; Sn63 : Pb37, Soldering Flux ; Rosin - Alcohol solution or
non - Activated soldering Flux.
3.5 Resistance to Soldering Heat The varistor shall be immersed completely in the solder bath. The temperature of
the solder shall be 260 +/- 5 deg.C and the immersion time shall be 5 +/- 0.5 seconds.
The varistor shall then be electrically examined.
Notes : Solder ; Sn63 : Pb37, Soldering Flux ; Rosin - Alcohol solution or
non - Activated soldering Flux.
4. Environmental Requirements
4.1 High Temperature Storage The specimen shall subjected to 125 +/- 2 deg.C for 1000 hours in a thermostatic bath
(Dry heat) without load then stored at room temperature and humidity for 1 to 2 hours.
Thereafter, the change of Vc shall be measured.
4.2 Damp heat The specimen shall be subjected to 40 +/- 2 deg.C, 90 to 95%RH for 1000 hours without
load and then stored at room temperature and humidity for 1 to 2 hours.
Thereafter, the change of Vc shall be measured.
4.3 Low Temperature Storage The specimen shall be subjected to -40 +/- 2 deg.C without load for 1000 hours and then
(Cold) stored at room temperature for 1 to 2 hours. Thereafter, the change of Vc shall be measured.
4.4 Heat Cycle The temperature cycling shall be repeated 5 times and stored at room temperature
and humidity for 1 to 2 hours. The change of Vc as well as mechanical damage
shall be examined.
4.5 High Temperature Load After being continuously applied the maximum allowable voltage at 85 +/- 2 deg.C for
(Dry heat load) 1000 hours, the specimen shall be stored at room temperature and humidity for
1 to 2 hours. Thereafter, the change of Vc shall be measured.
4.6 Damp heat Load The specimen shall be subjected to 40 +/- 2 deg.C, 90 to 95%RH and the maximum
allowable voltage for 1000 hours and then stored at room temperature and humidity
for 1 to 2 hours. Thereafter, the change of Vc shall be measured.
Note : Varistor Voltage change of forward direction shall be measured in the test of uni-pole
surge life and DC load life.
ZNR SURGE ABSORBERS SMD MOLD VF TYPE
TEST METHOD
SPECIFICATIONS
CLASSIFICATION No.
151S-ERZ-MA14- PS01
SUBJECT PAGE 1 - 4
DATE July 1 , 2002
1. Packing Design
1.1 Structure and Dimension
(1) Embossed Taping : Fig. 1 ~ 2
(2) Reel : Fig. 3
(3) Corrugated cardboard box : Fig. 4
1.2 Quantity
Reel Box
Max. 6000 pcs
( Max. 3 Reels )
1.3 Reel Labeling
(1) Part No.
(2) Quantity
(3) Lot No.
(4) Country of origin (marked in English)
2. Performance
2.1 Robustness of taping : 10 N min.
2.2 Peeling Test
(1) Angle : 0 ~ 15°
(2) Peeling Speed : 300 +/- 10 mm / min.
(3) Force : 0.1 ~ 1.3 N
Top cover tape
0 ~ 15°
Carrier tape
2.3 Missing Components
There shall be no more than 0.1% missing components between the first and last part on any reel.
Note / Revision
APPROVAL CHECK DESIGN
MATSUSHITA ELECTRONIC COMPONENTS CO., LTD.
2000 pcs
ZNR SURGE ABSORBERS SMD MOLD TYPE
Taped and Reeled Packing (Embossed Taping)
SPECIFICATIONS
CLASSIFICATION No.
151S-ERZ-MA14- PS01
SUBJECT
2 - 4
3. Taping Form
Top cover tape (thickness : 0.1mm Max.)
Carrier tape (thickness : 0.6mm Max.)
Fig. 1 Leader Part and Tape End
Tape end Leader part
40mm min. 40mm min. 200mm min.
Vacant position Components position Vacant position Top cover tape
Tape running direction
Marking
Terminal
Note / Revision
ZNR SURGE ABSORBERS SMD MOLD TYPE
Taped and Reeled Packing (Embossed Taping)
SPECIFICATIONS
CLASSIFICATION No.
151S-ERZ-MA14- PS01
SUBJECT
3 - 4
4. Embossed Taping
Fig. 2 Carrier Tape Dimensions
Code A B W F E P 1
Code P 2 P 0 Dia. D 0 t 1 t 2
+ 0.1 - 0
Note / Revision
6.5 max.
+/-
4.0 +/- 0.1 1.5
+/-
0.6 max.
7.5 0.1+/- 0.1 0.1+/-1.75 8.0
0.1
0.316.0Dim. (mm)
Dim. (mm) 2.0 +/-
6.8 +/-
SPECIFICATIONS
ZNR SURGE ABSORBERS SMD MOLD TYPE
Taped and Reeled Packing (Embossed Taping)
0.2 11.9 max.
Feeding hole Dia. D0 Chip pocket
B
A P1 P0
P2
t2
Chip component Direction of feed
E
F
W
t1
CLASSIFICATION No.
151S-ERZ-MA14- PS01
SUBJECT
4 - 4
5. Reel Packing
Fig. 3 Reel
A B C D E
Code W T t r
Fig.4 Corrugated cardboard box
( Unit : mm )
Note / Revision
Dim. (mm) 22.4 max.16.4 + 2.0 - 0
0.5
2.5 0.5+/- 1.0
21.0 +/- 0.8+/- 0.5
SPECIFICATIONS
2.0 +/-
Code
Dim. (mm) 13.0382.0 max. 50.0 min.
ZNR SURGE ABSORBERS SMD MOLD TYPE
Taped and Reeled Packing (Embossed Taping)
D
C
r
E
A
B
T
W
t
Approx. 345
Approx. 75
Approx. 340
Marking contents・Part number・Quantity・Lot number・Country of origin (marked in English)
Marking contents・Part number・Quantity・Lot number・Country of origin (marked in English)