Product Specifi cation Sheet - Weather Shield Specifi cation Sheet LIFEGUARD – WEATHER SHIELD ®...
Transcript of Product Specifi cation Sheet - Weather Shield Specifi cation Sheet LIFEGUARD – WEATHER SHIELD ®...
LIFEGUARD – WEATHER SHIELD ® DOUBLE-HUNG TILT WINDOWS (Model 1102) Insulated Glass UnitsThe following sizes have been tested to Missile Level “D” wind zone 3 requirements in accordance with ASTM E1886 and ASTM E1996. These products meet the windborne debris requirements as referenced in the IBC, IRC and TDI 1-98:
+55/-55 PSF Design Pressure • Single and mulled units up to and including 32" x 34" nominal glass size – 3/4" Overall Insul, 9/32" .090" KeepSafe Max Annealed Laminated I.S. Pane, 1/8" Annealed O.S. Pane
1
16x28
16x24
16x26
16x22
16x20
16x16
16x14
16x12
1'0-
11/1
6"
3'1-
5/8"
3'5-
5/8"
1'2-
11/1
6"1'
6-11
/16"
4'1-
5/8"
0'10
-11/
16"
[322
][3
73]
[475
][2
71]
2'9-
5/8"
3'1-
1/8"
[943
]
[956
]
3'5-
1/8"
[104
5]
[105
7][1
260]
4'1-
1/8"
[124
8]
1'8-
11/1
6"
4'5-
5/8"
[525
]
[136
2]
4'5-
1/8"
[134
9]
1'10
-11/
16"
4'9-
5/8"
[576
]
[146
4]
4'9-
1/8"
[145
1]
2'0-
11/1
6"
5'1-
5/8"
[627
]
[156
5]
5'1-
1/8"
[155
3]
2'2-
11/1
6"
5'5-
5/8"
[678
]
[166
7]
5'5-
1/8"
[165
4]
[854
]
2'9-
1/8"
[841
]
20x28
20x26
20x24
20x22
20x20
20x16
20x14
20x12
24x28
24x26
24x24
24x22
24x20
24x16
24x14
24x12
28x28
28x26
28x24
28x22
28x20
28x16
28x14
28x12
26x28
26x26
26x24
26x22
26x20
26x16
26x14
26x12
30x281
30x26
30x24
30x22
30x20
30x16
30x14
30x12
32x261
32x281
32x12
32x14
32x16
32x20
32x22
32x24
daylight opening
rough opening*
jamb/unit size
1'2-15/16"
1'9-13/16"
1'9-5/16"
[379]
[554]
[541]1'6-15/16"
2'1-13/16"
2'1-5/16"
[481]
[656]
[643]1'10-15/16"
2'5-13/16"
2'5-5/16"
[583]
[757]
[745]
2'2-15/16"
2'9-13/16"
2'9-5/16"
[684]
[859]
[846]
2'0-15/16"
2'7-13/16"
2'7-5/16"
[633]
[808]
[795]
2'4-15/16"
2'11-13/16"
2'11-5/16"
[735]
[910]
[897]
2'6-15/16"
3'1-13/16"
3'1-5/16"
[786]
[960]
[948]
*Note - The rough openings shown are the maximum allowed. Less than 1/2" is allowable (1/4" maximum shim at head-sill-sides).
1 These sizes meet or exceed emergency escape and rescue opening requirements per 2006 IBC (Inter-national Building Code). Minimum size: emergency escape and rescue openings shall have a minimum net clear opening of 5.7 sq. ft. [5295 cm2]. Exception: minimum net clear opening for emergency escape and rescue grade-floor openings shall be 5.0 sq. ft. [4645 cm2]. Minimum dimensions: the minimum net clear opening width dimension shall be 20" [508mm]. The minimum net clear opening height dimension shall be 24" [610mm]. Maximum height from floor: emergency escape and rescue openings shall have the bottom of the clear opening not greater than 44" [1118mm] measured from the floor. Floor to bottom of clear opening dimensions are based on 82" [2083mm] jamb height of Weather Shield French doors. Verify local or state emergency escape and rescue opening sizes with your local building inspector.
All windows are standard with two sash locks.
Product Specifi cation Sheet
2
16x32
2'6-
11/1
6"[7
79]
6'1-
5/8"
[187
0]
6'1-
1/8"
[185
7]
20x32 24x32 26x321 28x321 30x321 32x321
16x34
2'8-
11/1
6"[8
30]
6'5-
5/8"
[197
2]
6'5-
1/8"
[195
8]
20x34 24x34 26x341 28x341 30x341 32x341
16x30
2'4-
11/1
6"
5'9-
5/8"
[729
]
[176
8]
5'9-
1/8"
[175
6]
20x30 24x30 28x30126x30 30x301 32x301
daylight opening
rough opening*
jamb/unit size
1'2-15/16"
1'9-13/16"
1'9-5/16"
[379]
[554]
[541]1'6-15/16"
2'1-13/16"
2'1-5/16"
[481]
[656]
[643]1'10-15/16"
2'5-13/16"
2'5-5/16"
[583]
[757]
[745]
2'2-15/16"
2'9-13/16"
2'9-5/16"
[684]
[859]
[846]
2'0-15/16"
2'7-13/16"
2'7-5/16"
[633]
[808]
[795]
2'4-15/16"
2'11-13/16"
2'11-5/16"
[735]
[910]
[897]
2'6-15/16"
3'1-13/16"
3'1-5/16"
[786]
[960]
[948]
+55/-55 PSF Design Pressure • Single and mulled units up to and including 32" x 34" nominal glass size – 3/4" Overall Insul, 9/32" .090" KeepSafe Max Annealed Laminated I.S. Pane, 1/8" Annealed O.S. Pane • Available as a stacked combination (21-36x32 nominal glass size operator with 777/8" x 369/16" nominal glass size transom)
*Note - The rough openings shown are the maximum allowed. Less than 1/2" is allowable (1/4" maximum shim at head-sill-sides).
1 These sizes meet or exceed emergency escape and rescue opening requirements per 2006 IBC (International Building Code). Minimum size: emergency escape and rescue openings shall have a minimum net clear opening of 5.7 sq. ft. [5295 cm2]. Exception: minimum net clear opening for emergency escape and rescue grade-floor openings shall be 5.0 sq. ft. [4645 cm2]. Minimum dimensions: the mini-mum net clear opening width dimension shall be 20" [508mm]. The minimum net clear opening height dimension shall be 24" [610mm]. Maximum height from floor: emergency escape and rescue openings shall have the bottom of the clear opening not greater than 44" [1118mm] measured from the floor. Floor to bottom of clear opening dimensions are based on 82" [2083mm] jamb height of Weather Shield French doors. Verify local or state emergency escape and rescue opening sizes with your local building inspector.
All windows are standard with two sash locks.
LIFEGUARD – WEATHER SHIELD ® DOUBLE-HUNG TILT WINDOWS (Model 1102)Insulated Glass UnitsThe following sizes have been tested to Missile Level “D” wind zone 3 requirements in accordance with ASTM E1886 and ASTM E1996. These products meet the windborne debris requirements as referenced in the IBC, IRC and TDI 1-98:
Product Specifi cation Sheet
3
LIFEGUARD – WEATHER SHIELD ® DOUBLE-HUNG TILT PICTURE WINDOWS (Model 1102) Insulated Glass UnitsThe following sizes have been tested to Missile Level “D” wind zone 3 requirements in accordance with ASTM E1886 and ASTM E1996. These products meet the windborne debris requirements as referenced in the IBC, IRC and TDI 1-98:
+55/-70 PSF Design Pressure • Single units and two-wide units up to and including 481/2" x 66" nominal glass size – 1" Overall Insul, 13/32" .090" Sentry Glass Plus Annealed Laminated I.S. Pane, 5/32" Annealed O.S. Pane
*Note - The rough openings shown are the maximum allowed. Less than 1/2" is allowable (1/4" maximum shim at head-sill-sides).
36-1/2x42 44-1/2x42 48-1/2x42
44-1/2x34
44-1/2x46
44-1/2x50
44-1/2x54
44-1/2x58
44-1/2x62
36-1/2x34
36-1/2x46
36-1/2x50
36-1/2x54
36-1/2x58
36-1/2x62
48-1/2x54
48-1/2x62
48-1/2x58
48-1/2x50
48-1/2x46
48-1/2x34
4'1-
5/8"
4'5-
5/8"
4'9-
5/8"
3'5-
5/8"
4'1-
1/8"
[124
8]
3'4-
1/4"
[102
2]3'
8-1/
4"[1
124]
4'0-
1/4"
[122
6]4'
4-1/
4"[1
327]
4'8-
1/4"
[142
9]5'
0-1/
4"[1
530]
[126
0]4'
5-1/
8"[1
349]
[136
2][1
464]
4'9-
1/8"
[145
1]
5'1-
5/8"
[156
5]5'
1-1/
8"[1
553]
5'5-
5/8"
[166
7]5'
5-1/
8"[1
654]
5'9-
5/8"
[176
8]5'
9-1/
8"[1
756]
[105
7]
3'5-
1/8"
[104
5]2'
8-1/
4"[8
19]
daylight opening
rough opening*
jamb/unit size
3'6-15/16"
4'1-13/16"
4'1-5/16" 4'5-5/16"
4'5-13/16"
3'10-15/16"
3'5-13/16"
3'5-5/16"
[1062]
[1049]
2'10-15/16"[887] [1091]
[1265]
[1253]
[1192]
[1367]
[1354]
daylight opening
rough opening*
jamb/unit size
3'6-15/16"
4'1-13/16"
4'1-5/16" 4'5-5/16"
4'5-13/16"
3'10-15/16"
3'5-13/16"
3'5-5/16"
[1062]
[1049]
2'10-15/16"[887] [1091]
[1265]
[1253]
[1192]
[1367]
[1354]
36-1/2x66 44-1/2x66 48-1/2x666'
1-5/
8"[1
870]
6'1-
1/8"
[185
7]
5'4-
1/4"
[163
2]5'
8-1/
4"[1
734]
44-1/2x7036-1/2x70 8-1/2x70
6'5-
5/8"
6'5-
1/8"
[195
9]
[197
2]
Product Specifi cation Sheet
LIFEGUARD – WEATHER SHIELD ® DOUBLE-HUNG TILT TRANSOM WINDOWS (Model 1102) Insulated Glass UnitsThe following sizes have been tested to Missile Level “D” wind zone 3 requirements in accordance with ASTM E1886 and ASTM E1996. These products meet the windborne debris requirements as referenced in the IBC, IRC and TDI 1-98:
+55/-65 PSF Design Pressure • Single units in sizes up to and including 777/8" x 451/8" nominal glass size – 1" Overall Insul, 11/32" .090" KeepSafe Max Annealed Laminated I.S. Pane, 5/32" Annealed O.S. Pane
*Note - The rough openings shown are the maximum allowed. Less than 1/2" is allowable (1/4" maximum shim at head-sill-sides).
Sizes shown represent standard size offerings. Additional sizes are available up to maximum 777/8" x 451/8" nominal glass size, and are subject to a non-standard size upcharge.
Transoms are available in one-wide configurations only and may be stacked above a one or two-wide tilt unit (maximum 36" x 32" nominal glass size).
36-1/2x12
36-1/2x16
36-1/2x20
36-1/2x24
28-1/2x12
28-1/2x16
28-1/2x20
28-1/2x24
24-1/2x12
24-1/2x16
24-1/2x20
24-1/2x24
32-1/2x12
32-1/2x16
32-1/2x20
32-1/2x24
40-1/2x12
40-1/2x16
40-1/2x20
40-1/2x24
16-1/2x12
16-1/2x16
16-1/2x20
16-1/2x24
20-1/2x12
20-1/2x16
20-1/2x20
20-1/2x24
1'9-
5/16
"[5
41]
2'5-
5/16
"[7
45]
1'5-
5/16
"[4
40]
26-1/2x12
26-1/2x16
26-1/2x20
26-1/2x24
30-1/2x12
30-1/2x16
30-1/2x20
30-1/2x24
daylight opening
rough opening*
jamb/unit size
1'6-15/16"
2'1-13/16"
2'1-5/16" 2'5-5/16"
2'5-13/16"
1'10-15/16"1'2-15/16"
1'9-13/16"
1'9-5/16"
[379]
[554]
[541]
[481]
[656]
[643]
[583]
[757]
[745]2'7-5/16"
2'7-13/16"
2'0-15/16"[633]
[808]
[795]
2'6-15/16"
3'1-13/16"
3'1-5/16" 3'5-5/16"
3'5-13/16"
2'10-15/16"2'2-15/16"
2'9-13/16"
2'9-5/16"
[684]
[859]
[846]
[786]
[960]
[948]
[887]
[1062]
[1049]
2'4-15/16"
2'11-13/16"
2'11-5/16"
[735]
[910]
[897]
3'2-15/16"
3'9-13/16"
3'9-5/16"
[989]
[1164]
[1151]
1'8-1
3/16
"[5
29]
2'4-
13/1
6"[7
32]
1'4-1
3/16
"[4
27]
2'1-5
/16"
[643
]
2'0-1
3/16
"[6
30]
1'3 -1
/8"
1'11
-1/8
"[3
84]
[587
][2
83 ]
0'11-
1/8"
1'7-
1/8"
[486
]
4