Product presentation: TAU · Product portfolio of mounting systems Mounting systems On-roof In-roof...
Transcript of Product presentation: TAU · Product portfolio of mounting systems Mounting systems On-roof In-roof...
Product presentation: TAU
Product portfolio of mounting systems
Mounting systems
On-roof In-roof Fat roof Open terrain
Tau
Alpha
Theta
Kappa
Zeta
Lambda Light
Lambda
Sigma I
Omega
Sigma II
Gamma
For all types of trapezoidal sheet roofs
• Attractive and robust alternative to traditional on-roof system due to simple lateral
fixation
• Optimized in with regard to ease of installation and rapidity
– Very few componentesmit wenigen Einzelkomponenten
– Simple installtion
• Especially designed for commercial roofs and high
load situations
Stand 110804
TAU – ON-roof system
Stand 110804
For all types of trapezoidal sheet roofs
• Attractive and robust alternative to traditional on-roof system due to simple lateral
fixation
• Optimized in with regard to ease of installation and rapidity
– Very few componentesmit wenigen Einzelkomponenten
– Simple installtion
• Especially designed for commercial roofs and high
load situations
TAU – On-roof system
Stand 110804
• Minimum sheet thickness: 0.63mm
• Roof pitch up to 20°
• For framed and unframed modules
• Hight adjustability up to 5mm
• Lateral fixation for high load bearing (wind uplift)
• Aprox. 2-3 fixations /m
• One system for all types of metal roofs and module configurations
TAU - Facts
Stand 110804
• Base rail (lengths: 6m; 4.15m; 2.40m; optionally short rails 40cm)
• Lateral fixing clip, pre-assembled(optionally: Top fixing clip)
• Tau Joiner piece, pre-assembled
• Self-drilling screw with sealing washer
• EPDM strips, adhesive:40x20x1 or 80x20x1mm
TAU - Components
Stand 110804
1. Place EPDMs
2. Position rails on the roof
3. Clip on and position lateral fixing clips
4. Screw clips to the metal sheet
5. Fix modules with mid and end clamps
TAU - Installation in 5 steps
Stand 110804
• Alternative for bead hights < 20mm: Top fixation
• Axlternative components: Top fixing clip, EPDM 800x20x1
• Advantage: Full flexibility as to the type of corrugated sheet
TAU - Alternative: Top fixing clip
Stand 110804
TAU – at a glance
• Intelligent system
Few componentes for simple and quick installation
• Rapidity and ease of installation allows for important savings, especially in bigger
industrial installations
• Clever details:
– lateral fixing clip allows for higher uplift loads and enables a reduction of
fixing points
– Splice can be used for grounding
• Simple static verification and configuration through the use of the
Quickconfigurator
Stand 110804
Schutterwald, Deutschland, 14 kWp
Thank you for your attention.