Product Information: Taper Lock (TL) clamping bush
Transcript of Product Information: Taper Lock (TL) clamping bush
Product Information: Taper Lock (TL) clamping bush
Areas of Application
Shaft-hub connection for all drive elements such as
Poly-V sprockets, sprockets and chain sprockets
Standard sprockets for synchronous belts
Order Designation Example: TL 1615/32
4-digit number as model code
2-digit number for specifying the bore size
Note:
The technical data of the individual TL bushings as well
as the assembly instructions can be found in the download
data sheets.
Product Benefits
Great type diversity
Inexpensive clamping elements
Easy assembly/ disassembly
Short delivery time
Technical Information
Bushing material: steel
5 sizes
Bushing bores: 10mm – 130mm
Number of screws:
- Bush 1008 to 3030: 2 pieces
- Bush 3525 to 5050: 3 pieces
Holding torques with inserted fitted key from
136 Nm to 14,200 Nm
Sliding torques without fitted key from 29 Nm to 7370 Nm
Clamping forces axially from 3990 Nm to 119,500 Nm
Dimensions see overview taper lock bushes
Not suitable for use with aluminum
General Information
Download
overview
TL bushings
Download
assembly instructions
TL bushings
Taper Lock bushings (TL bushings) are coni-
cally slatted clamping bushes with keyway for
easy mounting of drive elements made of steel
(aluminum unsuitable!) on shafts.
The bushings are available in different dimen-
sions and external dimensions. For each exter-
nal dimension there are many different bore
diameters. The bushings are supplied with
grooves according to DIN 6885. Each compo-
nent that needs to be mounted must have the
outer contour of the related TL bushings.
TL versions are intended for simple applica-
tions without high running accuracies and are
useful for mass applications.
In the case of single unit production of spro-
ckets, the use of cylindrical clamping sets
makes more sense, above all for economic
reasons. The series can be found in our clam-
ping set catalog.
Shaft Tolerances
Cylindrical shafts should advantageously have
a diameter tolerance of +0.05 mm to -0.125
mm. Shafts with tolerance h9 can be used up
to a diameter of 100 mm.
Your specialist forsynchronous belt technologyTechnical Datasheet