Product Guide K85300-0010 -- Kidde Conventional...
Transcript of Product Guide K85300-0010 -- Kidde Conventional...
Kidde Conventional Systems Product Guide Conventional fire alarm solutions for small to mid-sized buildings.
1016 Corporate Park Drive Mebane, NC 27302
© 2016 United Technologies Corporation. All rights reserved. Specifica-tions subject to change without notice. Kidde is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation.
K85300-0010
A whole new way of looking at life safety.
Training on your terms...
Kidde self-study courses are designed by
educators with years of experience in the life
safety field. They give you the skills you need
to take full advantage of the innovative features
that our systems have to offer. All Kidde
courses may be used towards continuing
education credits.
Idea Guys who make you look
good...
Got a difficult job that needs some expert
guidance? Struggling with a tricky application
problem? Struggle no more. Our application
specialists offer free advice on how to make the most
of even the toughest installations. From panel configuration to
field wiring and devices – you’re just a call away from a Kidde
expert dedicated to getting you on the right track.
Tech Support in synch with your needs...
All our support technicians are NICET Certified life safety professionals
who combined have more than 180 years experience in the field. They
have their own Trouble Simulation Lab, ISO 9001: 2 Certification, and the
stamina to see every issue through to a successful resolution. Oh yes, and
our Tech Support is free. 24/7. Really.
A three-year warranty that speaks for itself...
Every Kidde system you purchase is underwritten by one of the most
comprehensive warranties in the business. This is your assurance that
Kidde equipment will bring long-term value to every installation with
quality products, innovative technology, and our three-year pledge of
uncompromising excellence.
Greater than the sum of its parts...
Designed from the ground up to work in concert with one another, our sys-
tems are true systems – not patchworks. In fact, Kidde remains one of the
only life safety suppliers today that engineers and manufactures fire alarm
control panels, initiating devices, and notification appliances.
The simplicity of conventional wiring with valuable features found only among high-end systems...
These easy-to-install fire alarm
systems demonstrate that value
doesn’t have to come at the expense
of quality, and that small building
owners don’t have to settle for
second-rate fire protection. Kidde FX
comes with a full lineup of advanced
features designed expressly for new
and retrofit projects that cry out for
simplicity, yet need
state-of-the-art
protection.
C o n t r o l P a n e l s
FX-XXRD Conventional system
Add D for DACT U/D dialer
10R for 10 Class B IDCs5R for 5 Class B IDCs
Ordering Information
Data Sheet K85005-0126
No-charge
technical
support!
Kidde takes the very best conventional fire alarm technology available today and blends it with features that benefit installers, contractors, building owners and occupants to provide an effective and economical solution for all small building needs...• Automatic drift compensation
extends detector life
• Precision UL 1971 signal synchronization and optional audible silence over just two wires
• Ten-zone panels offer up to 7.5 amps of available NAC power
• Fully integrated upload/download communications enables PC programming and off-premise monitoring
• Zone or NAC pairs convertible to single Class A circuits
• Combination Waterflow and Supervisory zones
• NACs programmable by zone and individually selectable for continuous, temporal or coded outputs, or the FX synchronization protocol.
Specifications FX-10 FX-5Initiating Circuits
Class B 10 8 6 4 2 0 5 3 1Class A 0 1 2 3 4 5 0 1 2
Notification Circuits
Class B 4 2 2 0 2 0Class A 0 1 1 2 0 1
Power Supply 7.5 amps total 4.25 A totalNAC Voltage Rating 24 VfwrMaximum NAC current
2.0 amps each, 7.0 amps total
2.0 A each 3.5 A total
AC Input @ 120 Vac 60 Hz...
2.2 amps 1.25 A
Panel Current DrawStandby...
Alarm...128 mA 242 mA
104 mA 224 mA
Panel Battery Charge Capacity
Two 24 Ah batteries, 17 Ah in cabinet
Two 24 Ah, 10 Ah max in
cabinet
1
R e m o t e A n n u n c i a t i o n & C o n t r o l
The Kidde FX serial remote annunciator bus can run up to 1,000 feet!
The FSRSI can be installed alone or with one or more FSRZI-As. The FSRSI and FSRZI-A require trim plates (ordered separately).
These are available in one, two or three gang models. Each panel will support two FSRSIs.
Remote System Indicator (FSRSI)Ideal for common system annunciation. Includes five LEDs and a local silence/lamp test switch. The LEDs indicate power status, alarm, supervisory, trouble and ground fault. The silence switch will silence the onboard trouble buzzer if active.
Remote Zone Indicator (FSRZI-A)Used to indicate zones in the alarm. It contains five red LEDs. IDCs annunci-ated are determined by jumper settings.The panel can sup-port two modules programmed for each selection.
Remote Zone Indicator (FSRZI-SA)Used to indicate zones in alarm or supervisory states. It contains five red and yellow LEDs. IDCs annunciated are determined by jumper settings. The panel supports two modules programmed for each selection.
Compatible electrical box
FSRZI
or
FSRSI
Three year warranty!
2
Remote LED annunciators K-FSRA10, K-FSRA10CThe K-FSRA10 can accommodate up to ten zones. It includes ten
red/yellow bi-color LEDs for indicating active zones, and ten yellow
LEDs for indicating zone troubles. The (C) option adds common
control switches. Both versions mount to standard North American
two-gang or 4-inch square electrical boxes. A surface box is also
available.
Ordering Information Data Sheet K85005-0126
AnnunciatorsFSRSI Remote System IndicatorFSRZI-A Remote Zone Indicator - AlarmFSRZI-SA Remote Zone Indicator - Alarm/SupervisoryFSAT1 Annunciator Trim Plate, 1 gangFSAT2 Annunciator Trim Plate, 2 gangFSAT3 Annunciator Trim Plate, 3 gangFSAT4 Annunciator Trim Plate, 4 gangK-FSRA10 10 zone remote annunciator for FX-10K-FSRA10C 10 zone remote annunciator with common controls (FX-10)
FSUIMCommon Function Graphic Driver/Interface - 9 relays, 5 inputs for common system indicators and controls.
Control RelaysFSRRM24 Remote Relay Module – Five Form C relays.FSRRM24 -S11
11” Mounting track. Holds up to 4 FSRRM24s.
Remote Relay Module
The Remote Relay Module (FSRRM24) is
another feature of the system that sets Kidde FX
apart from other panels in its class. This module
has five Form C relays rated at 1 amp each. It
can be configured to function in either a zone relay mode or a com-
mon system mode. The FSRRM24 mounts on a plastic snap track
and can be installed in any listed fire alarm enclosure. The panel
will support two RRMs of each configuration for a total of six on the
10-zone panel.
3
I n i t i a t i n g D e v i c e s
Exclusive built-in drift compensation
dramatically extends the time between
cleanings – and if cleaning is ever
necessary, the exclusive optical chamber
takes just seconds to replace!
Intelligent features at a conventional price!
Free application support!
4
700 Series
Two- and Four-wire Smoke/Heat Detectors Data Sheet K85001-0598
The Kidde conventional photoelectric smoke detector is an inter-changeable head and base detector with a light-scattering optical sensor that provides outstanding stability and excellent response to a wide range of fires. Model 721UT photoelectric detectors include integral fixed temperature and rate-of-rise heat detectors. The 721UT provides remote alarm and trouble LED driver outputs. Also available is the 713-5U electronic heat detector head for areas too dusty for smoke detection.
711U Smoke detector head only, photoelectric, two-wire721UT Smoke detector head only, photoelectric, two-wire w/integral
heat, output for remote LED731U Smoke detector head only, photoelectric, two-wire, use
702RU base for aux. relay functionality741U Smoke detector head only, photoelectric, four-wire701U Smoke detector base, 3 terminals, 6" dia.702U Smoke detector base, 6 terminals, 6" dia.702RU Smoke detector base, 6 terminals, aux. relay, 6" dia.
500 Series
Self-Diagnostic Smoke Detectors Data Sheet K85001-0606
These photoelectric smoke detectors have interchangeable heads and bases. They feature a light-scattering optical sensor that provides outstanding stability and excellent response to a wide range of fires.
541NB Photoelectric Smoke Detector, 4-wire541NBXT Photoelectric Smoke Detector, 4-wire, heat541NCSXT Photoelectric Smoke Detector, 4-wire, sounder, heat
Keep plenty of spare optical chambers on-hand at all times...211-10PKG Replacement optical chambers (package of 10)
I n i t i a t i n g D e v i c e s
5
Heat Detectors
CR/CF Series, Metal housings Data Sheet K85001-0367
CR135-2Combination Rate-of Rise and 135°F (57°C) Fixed Temperature
CR200-2Combination Rate-of Rise and 200°F (93°C) Fixed Temperature
CF135-2 135°F (57°C), Fixed TemperatureCF200-2 200°F (93°C), Fixed Temperature
280B-PL Series, Plastic Housings Data Sheet K85001-0261
283B-PL 135°F (57°C), Fixed Temperature284B-PL 194°F (90°C), Fixed Temperature
270 Series
Conventional Fire Alarm StationsData Sheet K85001-0303
270 Series Non-Coded Fire Alarm Stations are sturdy, attractive, and designed for economical installation. All non-coded stations are designed for either flush or surface mounting. For flush mount-ing a 4 inch standard North American square box with single gang plaster cover should be used.
270A-DPO Double-pole fire alarm station270A-SPO Single-pole fire alarm station270P-SPO Single-pole fire alarm station with pre-signal
276/277 Series
Single-Action Fire Alarm StationsData Sheet K85001-0183
The Cat. No. 276B/277B series noncoded fire alarm stations are contemporary styled Lexan stations and are flexibly designed to meet a wide variety of application requirements and operational sequences.
276B-1110 Single-pole fire alarm station, tool reset
276B-1120 Single-pole fire alarm station, key reset
277B-1110 Single-pole fire alarm station, tool reset, wire leads
EC-50R/-100R
Reflective Beam DetectorData Sheet K85001-0560
The EC-50R/-100R comprises a transmitter and receiver in a single enclosure and is usually installed between 19 inches and 24 inches below the ceiling. The transmitter emits an invisible infrared light beam that is reflected via a prism mounted directly opposite and with a clear line of sight.
EC-50R Reflective Beam Detector c/w test filter and one reflector
EC-100R Reflective Beam Detector c/w test filter and four reflectors
EC-LLT Ground Level Test Station
SuperDuct Series
Duct Smoke DetectorsData Sheet K85001-0583 (four-wire) Data Sheet K85001-0585 (two-wire)
SuperDuct detectors continually sample air flow in the HVAC duct and initiate an alarm condition whenever smoke is detected. Air velocity in the duct may be as low as 100 ft/min.
ESD-CJ 4-wire Controller (RJ45)ESD-SJ 4-wire Sensor (RJ45)ESD-4WJ 4-wire Controller w/sensor (RJ45)ESD-CT 4-wire Controller (terminals)ESD-ST 4-wire Sensor (terminals)SD-2W 2-wire SuperDuct Detector
I n i t i a t i n g D e v i c e s
6
30-3013Explosionproof Smoke DetectorData Sheet K85001-0645
Model 30-3013 detectors are high performance smoke detectors built for use in hazardous locations. They are corrosion-resistant and feature a non-conducting aluminum alloy retaining ring that protects the detector sensor against the effects of explosions and other catastrophic events.
30-3013A1N12F Explosionproof Smoke Detector
MPSR Series
Hazardous Location Fire Alarm StationsData Sheet K85001-0588
MPSR Series manual pull stations are noncoded fire alarm stations solidly constructed of die-cast material. All components are pre-painted or have plated surfaces to inhibit corrosion. Weatherproof manual stations are rated for outdoor use. Explosionproof/weath-erproof manual stations are rated for Class I Group B (hydrogen) C & D, Class II Groups E. F, G, Class III environments, and are rated NEMA 4X for outdoor use.
Single Action Harsh Environment Manual Stations
Switch Contacts ResetSingle Pole
Double Pole
Tool Key
K-MPSR1-D45W ü ü
K-MPSR1-D45WX (explosionproof) ü ü
K-MPSR1-DHTW ü ü
K-MPSR1-S45W ü ü
K-MPSR1-SHTW ü ü
XAL53
Hazardous location Fire Alarm StationData Sheet K85001-0371
The XAL53 is an extremely rugged double-action fire alarm station suitable for hazardous locations. The device is activated by lifting the front cover and pulling down the ring. This two-step process prevents unintentional operation.
XAL53 Hazardous Location Fire Alarm Station
I n i t i a t i n g D e v i c e s
7
N o t i f i c a t i o n A p p l i a n c e s
Wall and ceiling devices are available with white or red housings – and with optional “FIRE” markings.
Ceiling devices are rated for wall or ceiling mount applications.
Field-configurable light and sound output means fewer devices to stock, and greater flexibility.
The “Running Man” icon meets code requirements, overcomes language barriers, and eliminates lens marking headaches.
About the size of a deck of playing cards.
UL 1971 compliant with Kidde panels and boosters!
Do more with less.Kidde control panels work with
exclusive signaling technology that
delivers independent horn control
over just a single pair of wires. This
valuable feature makes it possible
to silence horns while the strobes
remain active!
Plus...
8
Wall Horns & Strobes Data Sheet K85001-0573
EG1RF-HDVM strobe
VM for selectable cd strobeor...V1575 for fixed 15/75 cd
Add HD for temporal horn with high or low dB outputor... P for steady horn
Add R for red housing
Wall strobe, white housing.
Add F for FIRE marking
Wall ChimesData Sheet K85001-0574
EG1RF-CVM strobe
Add VM for chime-strobe with selectable 15, 30, 75, or 110 cd output
Add R for red housing
Wall chime, white housing with high or low dB output.
Add F for FIRE marking
Ceiling Horns & StrobesData Sheet K85001-0559
EGCRF-HDVMH Horn-strobe
Add H for selectable 95, 115, 150, or 177 cd output
Add R for red housing
Ceiling Horn-strobe, white, selectable 15,30,75, or 95 cd
Add F for FIRE marking
Low Frequency SignalsData Sheet K85001-0639
Provides the benefits of Genesis life safety signals with
output suitable for sleeping areas and other applications requiring low frequen-cy audible tones.
G4LFRF-HVM Horn-Strobe
HVM for Horn-StrobeH for Horn-Only
R for red housing W for white
Low Frequency Wall SignalF for FIRE marking N for no marking
Kidde brings
on-demand
signaling to every
application with
an unparalleled
range of field-
configurable
options like
horns and
chimes with
high/low dB
output settings,
and strobes
with selectable
candela output
and flash rate –
options that put
you in the driver’s
seat when time
is short, budgets
are slim, and
manpower is at a
premium.
N o t i f i c a t i o n A p p l i a n c e s
9
10
V o i c e A u d i o
ANS series
Audio Notification SystemData Sheet K85001-0587
This self-contained system is available in 25, 50, or 100 Watt models. Includes an amplifier, tone generator, digital message repeater (DMR), and supervisory interface. It is compatible with Kidde field configurable speak-ers and speaker-strobes.
Voic
e of
Aut
horit
y.
P o w e r S u p p l i e s
Booster Power SuppliesData Sheet K85005-0125Booster and Auxiliary power supplies contain all the necessary circuits to monitor and charge bat-teries, control and supervise NAC circuits, monitor controlling inputs from external sources, and provide UL 1971 strobe synchronization.
EBPS6A 6.5 Amp Booster Power Supply EBPS10A 10 Amp Booster Power SupplyAPS6A 6.5 Amp Auxiliary Power SupplyAPS10A 10 Amp Auxiliary Power Supply
10
Wall Speakers, Strobes Data Sheet K85001-0642
Selectable ¼, ½, 1, or 2 watt taps.
G4HFRF-S2VMC
VM for selectable standard cd output
S7 for 70 V model S2 for 25 V model
High Fidelity Wall Speaker/Speaker-strobe
W for white housing R for red housing
F for FIRE marking A for ALERT marking
N for no marking
C for clear lens A for amber lens
Omit for speaker only
Ceiling Speakers, StrobesData Sheet K85001-0641
Selectable ¼, ½, 1, or 2 watt taps.
GCHFRF-S2VMCH
VM for standard cd output Add H for high cd output
S7 for 70 V model S2 for 25 V model
High Fidelity Ceiling Speaker/Speaker-strobe
W for white housing R for red housing
F for FIRE marking A for ALERT marking
N for no marking
C for clear lens A for amber lens
Omit for speaker only
Add H for high cd output
Outdoor Speakers and Speaker-StrobesData Sheet K85001-0626
Selectable ¼, ½, 1, or 2 watt and 25 V or 70 V.
WG4RF-SVMC speaker-strobe
SVMC for 15/29/70/87 cd SVMHC for 102/123/147/161 cdS for speaker only
R for red housing W for white
F for FIRE marking, N for none
S p e c i a l A p p l i c a t i o n S i g n a l s
Outdoor Horns and Horn-StrobesData Sheet K85001-0628
WG4RF-HVMC horn-strobe
HVMC for selectable standard cd output HVMHC for selectable high cd outputH for horn only
R for red housing W for white
F for FIRE marking, N for none
438/439 Series
Fire Alarm BellsData Sheet K85001-0333
Fire Alarm Bells are specially designed for fire alarm applications.
The gongs are made of selected alloy steel to give the loud, reso-
nant tones necessary in fire alarm systems.
438D-6N5(R) 6 inch (150mm) Vibrating, Diode, Red438D-10N5(R) 10 inch (250mm) Vibrating, Diode, Red439D-6AW(R) 6 inch (150mm) Vibrating, Diode, Red439D-10AW(R) 10 inch (250mm) Vibrating, Diode, Red438D-8N5 8” (200mm) Vibrating, Diode, Gray439D-8AW 8” (200mm) Vibrating, Diode, Gray
116 Series
Hazardous Location StrobesData Sheet K85001-0624
116 Series hazardous location strobes are in-rush
current limited life safety signaling appliances de-
signed for installation in hazardous environments.
Rigid specifications and state-of-the-art technology
provide for high visual output and low maintenance.
116DEGEX-FJ Explosionproof Strobe, Diode Polarized116EX-B Wall bracket mounting elbow (required for wall mount)116EX-C Ceiling/wall mounting module (required for wall mount)116EX-P Pendant mounting module - ¾” (19 mm) NPT116-GRD Lens Guard116-GLOBE Replacement Globe
888D-N5 & 889D-AW
Hazardous Location HornsData Sheet K85001-0397
888D and 889D hazardous location horns are diode-polarized,
heavy duty, high decibel vibrating horns intended for use in life
safety systems in hazardous (classified) and outdoor locations.
Each unit is supplied with a sealing fitting for ¾-inch -14 National
Pipe Taper (NPT) nipple, and wire leads for the electrical connec-
tion to the life safety system notification appliance circuit.
888D-N5 Hazardous location horn – 120 Vac889D-AW Hazardous location – 24 Vdc
11
12
D o o r H o l d e r s
1500 Series
Electromagnetic Door HoldersData Sheet K85001-0421
Electromagnetic door holders keep doors open until signaled by the fire alarm system, a heat detector, a smoke detector, or an electri-cal switch. Fail-safe operation is an inherent feature of these door holders. If power fails, doors are released automatically, but may be opened or closed manually at any time. All units are free of moving parts, are self-contained, and require no maintenance. Door holders have a holding force of approximately 15-25 Lbf (66-111N).
1501-AQN5 Floor Mounted (Single Door)1502-AQN5 Floor Mounted (Double Door)1504-AQN5 Flush Wall Mounted (Long Catch Plate)1505-AQN5 Flush Wall Mounted (Short Catch Plate)1508-AQN5 Surface Wall Mounted1509-AQN5 Completely Flush Wall Mounted
R e l a y s
MR-199 Series
Heavy Duty Power RelaysData Sheet K270065
The MR-199 Heavy Duty Power Relays are designed for control applications where 30 Amp DPDT contacts are required. Two models are available: a 115 Vac coil and a 24 Vdc coil, each of which may be mounted in a rugged steel enclosure.
MR-199X-13/C DPDT, 24 Vdc, mounted in enclosureMR-199AX-14/C DPDT, 120 Vac, mounted in enclosure
PAM-1
Multi-Voltage Control RelayData Sheet K270066
The PAM-1 Relay is encapsulated multi-voltage device providing 10 Amp Form C contacts. The relay may be energized by one of three input voltages: 24 Vac, 24 Vdc, or 115 Vac.
PAM-1Single SPDT relay with LED, double-sided adhesive tape, mounting screw and 6 in (150 mm) leads.
MR-100 & MR-200 Series
Multi-Voltage Control RelaysData Sheet K270062
The MR-Series Multi-Voltage Control Relays offer SPDT or DPDT 10 Amp contacts which may be operated by one of four input control voltages. A single relay may be energized from a voltage source of 24 Vdc, 24 Vac, 115 Vac or 230 Vac by wiring to appropriate input terminals.
MR-101/C Single SPDT relay with LED mounted in metal enclosureMR-201/C Single DPDT relay with LED mounted in metal enclosure
K85300-0010
Contact us...
Email: [email protected]: www.kiddefx.kidde.com
Kidde is a UTC brand.
1016 Corporate Park Drive Mebane, NC 27302
© 2016 United Technologies Corporation. All rights reserved. Specifications subject to change without notice. Kidde is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation.
Contact your Kidde representative for comprehensive product information.