Product Guide - Aask us Ltd · 21.2 5 0 21.2 1 0 0 21.2 1 2. 5 21.2 2 5 21.2 9 21.2 1 9 21.2 4 21.2...

Product Guide

www.aask.us

aask us are the leading UK manufacturer of trims and bespoke products for suspended ceilings, partitions and dry lining.

Customer satisfaction is fundamental to our success, a fact that we never forget. We will strive to meet your requirements, from a stock product to a special design, and we can assure you that you will get the best service possible.

With a production area of 13,500 square feet, including in-house pre-treatment, powder coating line, and extensive sheet metal machinery, we can offer a comprehensive range of products in the fastest possible lead-time.

and products we can supply. However, we are continually adapting and introducing items into our range, so if you cannot

01869 322321 [email protected] www.aask.us

metal stud

M.D.F rebatedskirting

metal channel

adhesive / sealant

tape & joint

Reveal Trim

Reveal Trim

Plasterboard

tape & jointReveal Trim

REVEAL APPLICATIONS

Reveal Trims are used to create ashadow reveal on partitions and ceilings

Wall Reveal

Reveal /Skirting Trim

Dry wallscrew

Page 1

MF System

610

30

/ 40

/ 50

/ 75

/ 100

12.5

25

12.5

15 20 25

15

12.5

13.4

ref

15

15

13.4

ref

12.5

25


Page 2

aa-R6

aa-ST30

aa-ST40

aa-ST50

aa-ST75

aa-ST100

aa-R10

aa-W25

aa-R12

REVEAL TRIMUsed to create horizontal or vertical reveal details where there are areasof dry lining, suspended ceilings, door frames, skirting, window frames etc.,

SKIRTING TRIMUsed to create recessed skirting detailsin partitions and dry lined walls

WALL SHADOWLINE

aa-W12

Used to create horizontal orvertical linear recessed features

aa-R15 aa-R20 aa-R25

REVEAL DEEP TRIMUsed with 15mm plasterboard for Deep Reveal

aa-RD12 aa-RD15

DOOR REVEALUsed to create defined recess featureadjacent to door frames, windows etc.,

aa-D12

aa-D25

21.2

50

21.2

100

21.2

12.5

21.225

21.2

9

21.2

19

21.2

4

21.2

15


EDGE BEAD

aa-E100

aa-E50

E trim, used to create crisp horizontal or vertical straight edges at theend of a run of platerboard, or where a raised or recessed feature isrequired, for example a skirtng rebate or adjacent to a door frame. The trim can be used in both wall and ceiling applications.

aa-E12

aa-E25

FLEXIBLE RANGEFlexi trims can be curved on siteto create horizontal or vertical curvesat the edges of dry lined plasterboard,or where a curved feature is required.

Please call our office for further adviceon what can be achieved.

aa-E9

aa-E19

aa-E4

aa-E15

Page 3

20 1520

15

2020

20


aa-JTA20aa-JTA0 aa-JTA15

12.5 mm PlasterboardTape & Joint to suit

'mf' system - as required

Lay-on TypeCeiling Tile

SuspensionAngle

JUNCTION TRIM - ANGLE

JTA trim, used to create crisp junction details between mineral fibre,g.r.g, or full module metal ceiling systems and adjacent areas ofplasterboard. The profiles with a shadow rebate provide a clear definition between the different ceiling types.

Page 4

20

38

1520

15

38

2020

20

38


JUNCTION TRIM - CHANNEL

JT trim, used to create junction details between metalceiling systems and adjacent areas of plasterboard.With the facility to use tile wedges on the cut tile edge.The profiles with a shadow rebate provide a clear definition between the different ceiling types.



Metal Ceiling Tilewith cut edge

SuspensionAngle

Tile Wedge

aa-JT20aa-JT0 aa-JT15

Page 5

20

38

15

32

25

50

25

25

50

50

19

32

38

20


CHANNEL TRIM

aa-CH20

aa-AG15

aa-AG2525 aa-AG5025

Angle Trims are used to create a crisp perimeter detail where mineral fibre,g.r.g. plasterboard or full module metal ceiling tile systems abut walls,partitions or upstands. Angle Trims can be factory curved to suit bothconcave and convex walls and can be formed into column rings.

ANGLE TRIM

Channel Trims are used to create a crispperimeter detail where cut metal ceiling tilesystems abut walls, partitions or upstands.The channel feature is designed to acceptstandard hold down wedges to retain cut tiles.Channel Trims can be factory curved to suitboth concave and convex walls and can beformed into column rings.

aa-AG5050

aa-AG19 aa-AG20

Page 6

20 15

15

20 20

20



aa-SA15 aa-SA20

Page 7

Used to create crisp shadowline perimeter detail wheremineral fibre, g.r.g, plasterboard or full module metal ceiling systems abut walls, partitions and upstands.

SHADOWGAP ANGLE

20

38

15

15

20

38

20

20


aa-SC15

Metal PanCeiling Tile

Tile Wedge

aa-SC20

Used to create crisp shadowline perimeter detail wherecut metal ceiling systems abut walls, partitions and upstands.The channel feature is designed to accept standard holddown wedges to retain cut tiles

SHADOWGAP CHANNEL

Page 8

21

1515

8

15

15



SuspensionAngle



JTAS Step trim, used to create crisp junction details between mineralfibre, g.r.g, or full module metal ceiling systems and adjacent areas ofplasterboard. The tegular edge of the tile is matched with the stepof the trim, creating a shadow rebate which provides a clear definitionbetween the different ceiling types.

aa-JTAS-8 aa-JTAS-15 aa-JTAS-21

JUNCTION TRIM - ANGLE STEP

Page 9


METAL WORK

With a comprehensive range of Sheet Metal production capacity, aask uscan manufacture all of your metal requirements. Our machinery includes 4mtr Guillotine and Press Brake, CNC Turret Punch, Welding of steel andaluminium. Contact our sales office for your requirements of Panels, Brackets, Cills,Flashings, Angles, Trays, and special designs.

Page 10


BLIND BOX

Manufactured from aluminium or steel sheet. Precision engineeredto suit site requirements, can be adapted to all ceiling requirements,and can be supplied with suspension brackets, mitres, welded cornersend caps etc.,

Typical Detail



Tape & Joint detailformed in press metal

Example of other options

Page 11

13.4

6

35

13.4

6

3810

35

15 20

15

30

2010

10



12.5 mm Plasterboard

aa-UA35

aa-UC35

Used to create crisp junction details between full modulemetal ceiling systems and adjacent areas of plasterboard.

JUNCTION TRIM



aa-JTAS1010 aa-JTFM15-30

JUNCTION UPSTAND

Upstand trims, used to create junction details between suspendedceiling systems and vertical plasterboard or MDF upstands

For mineral tiles

For cut metal tiles

Page 12

5.5 15

155.5

12.7

15

15

20

20


PLASTERBOARD TRIM


mf5 - as required

aa-P15

aa-PT15 aa-PT20

Used to create crisp edging perimeter detail where plasterboardceiling systems abut walls, partitions and upstands.

aa-P01"Plug in" type"Plug in" type

Page 13

15

10

37.3

15

37.3

42.3

11


PERIMETER JUNCTION



Used to create crisp junction detail between areas of "spring tee"metal ceiling systems and adjacent plasterboard ceiling areas

Spring Tee System

Bevel Edge MetalTile system

aa-PE15aa-PE0

Page 14

50

120

38

3737

20

20

25

40

2515

35

37

150

38

20

38

60

40

30


aa-BR150, BANDRASTER / JUNCTION TRIM

aa-BR40 BANDRASTER

aa-AG50/120

OTHER PROFILES

aa-JA37 aa-J37

aa-AG2020 aa-AG4025

aa-T25aa-T15 aa-T37

Tee Bars with "MARTINGALE" twistclip feature ideal for non-standard modulesand "non-ferrous" MRI scanner rooms

Can be machinedto create other sizes

Tile Wedge

Metal Ceiling Tilewith cut edge

aa-CH2060


Page 15


ISLANDS

Page 16

82

19

19

19154

19

50

100

150

200


X-CC2 Upstand,External Corner Clipsupplied c/w 2 No. fixing screws

X-CC1 Upstand, Internal Corner Clipsupplied c/w 2 No. fixing screws

X-SP1 Upstand, Straight Splice Clipsupplied c/w 2 No. fixing screws

X-501a Tee Bar Connector Clip

aa-US50 aa-US100 aa-US150 aa-US200

aa-UW154

Available as pre-cut or curvedkits to any size requirement.

Page 17

ISLANDS

The Upstand profiles are ideal for creating 'island' and 'floating ceilings'where the Upstand Channel forms a frame around a ceiling area and issuspended either directly from the soffit or below an existing ceiling. Inaddition the suspension can be set back from the profile edge enhancingthe floating island effect. These profiles create ideal aesthetic solutionswhilst maintaining all the acoustic benefits of the ceiling tiles. Complete withfull range of accessories

18 21

20

75 /

100

/ 122

75 /

100

/ 122


Glazing Type Plain Type

END CAP RANGE

aa-ECP trim, Plain cap closure trim for partition walls

aa-ECG trim, Glazing cap closure trim for partition wallswith a pocket to accept single glazing and gasket

aa-ECG75

aa-ECG100

aa-ECG122

aa-ECP75

aa-ECP100

aa-ECP122

Page 18

25

25

25

25

25

25

50


aa-GL02

GLAZING RANGE

aa-GL03 aa-GL04 aa-GL50

All profiles are stocked in;RAL 9010 WhiteRAL 9006 SilverRAL9005 Black

aa-GL01 / aa-GL50

aa-GL04 aa-GL03

aa-GL01 aa-GL02

The aa-GL range is a sleek single glazedflush look head and base track system.

Page 19


External

Toe-Out

Internal

Toe-In

REVEALS & SKIRTINGS

EDGE BEADS

External Internal

Toe-In Toe-Out

Barrel Vault

STEEL FORMERS

Toe-InToe-Out

ANGLES

CHANNELS

Toe-InToe-Out

Page 20

CURVED TRIMSThe majority of our profiles can be curved, either in one piece,or for more complicated profiles fabricated in composite.Please call our office for further details.

Designed use: Products are supplied as designed and intended for use as support or feature trims as part of conventional dry wall, partition or suspended ceiling systems.

Materials:

available including all RAL, NCS and BS colours. Prior to powdercoating the extrusions are given a non-chromate pre-treatment process to ensure adequate powder adhesion. Standard length is 3000mm unless stated otherwise.

aask us products conform to current regulations regarding CE marking and declarations of conformity.

Fire Performance

Installation – Dry Lining Trims Dry Lining Trims are designed for use as part of a conventional dry wall, partition or ceiling system with either single or multiple layers of plasterboard. aask us Ltd dry lining trims may be used with all major brands of plasterboard, metal stud, channels and timber framing. Please note framing centres should not exceed 600mm.

fully support the trim and ensure there is no movement. We recommend a minimum of 150mm centres for dry wall screws to ensure rigidity.

The paper reinforcing jointing tape should not be visible beyond the plastering stop detail and

should be removed from the visible faces of the trim with a damp cloth whilst it is still soft and

Installation – Ceiling Trims

refer to information above on Dry Lining Trims.

Tel: 01869 322321 Fax: 01869 322771 [email protected] www.aask.us

need more information..? aask us

www.aask.usLaunton Business Centre, Murdock Road, Bicester, Oxfordshire OX26 4PP

Tel: 01869 322321 Fax: 01869 [email protected]

aask us is dedicated to supplying high quality to our customers

– and that means high quality service too.

technical help...? aask us

need stock tomorrow...? aask us

bespoke one-off design...? aask us

Product Guide - Aask us Ltd · 21.2 5 0 21.2 1 0 0 21.2 1 2. 5 21.2 2 5 21.2 9 21.2 1 9 21.2 4 21.2...

Documents

Transcript of Product Guide - Aask us Ltd · 21.2 5 0 21.2 1 0 0 21.2 1 2. 5 21.2 2 5 21.2 9 21.2 1 9 21.2 4 21.2...