PRODUCT GUIDE 2012 · 2017-08-18 · 2 Flush44 Cubicle Range About Us 3 Flush44 4-5 T-Line 6-7...
Transcript of PRODUCT GUIDE 2012 · 2017-08-18 · 2 Flush44 Cubicle Range About Us 3 Flush44 4-5 T-Line 6-7...
CUBICLE & WASHROOM SPECIALISTS
www.excelsior-cubicles.co.uk
PRODUCT GUIDE 2012
2 Flush44 Cubicle Range
About Us 3
Flush44 4-5
T-Line 6-7
Senator 8-9
Skyline 10-11
Hydroline 12-13
Mariner 14-15
Select 16-17
Entasis 18-19
Classik 20-21
Option 22-23
Harlequin 24-25
Harlequin Peardrop 26
Vanity Units 27-29
Duct Panelling 30-31
Healthcare Duct Panelling 32-33
Lockers 34-35
Bench Seating 36-37
Accessories 38-43
Contents
Cubicle & Washroom Specialist 3
from creation to installation... you can rest assured
At Excelsior, we have undertaken the manufacture, supply and installation of bespoke washroom
products in all washroom environments since 1978. We have an extensive selection of WC and
changing cubicles, duct panelling and vanity unit systems to suit all environments; from schools to
office developments, leisure centres to hospitals we have a solution to your requirements.
About Us
All levels of durability are catered for to meet our
client’s specification requirements and commercial
constraints, always combining innovation with
practicality.
With a combined factory, office and showroom
space of some 30,000 sq. Feet, and the latest in
production machinery we are continually striving to
meet and exceed all of our client’s expectations.
Dedicated and professional teams of Sales
Estimators, CAD Draughtsmen and Contracts Staff
are readily available to provide technical assistance
and guidance through our product ranges relative to
individual project needs.
Furthermore, we offer an installation service were
we survey and manage the on-site process. Our
experienced site fitting teams are fully trained and
equipped with trade specific CSCS cards to ensure
that our products are installed to the quality
standards to meet our client’s expectations.
The Flush44 cubicle range is the genuine 'premium quality' system, offering a sleek flush
fronted facade, and with surface finishes available in both HPL and Natural Veneer,
allowing the the most discerning specifier complete satisfaction in their selection.
Flush44
2 3 41
1. Indicator Thumbturn
2. Hinge Knuckle
3. Indicator Face Plate
4. Stainless Steel D Handle
Office HQ, Leicestershire
4 Flush44 Cubicle Range
The premium flush fronted cubicle solution.
Cubicle & Washroom Specialist 5
44 Flush Cubicle - Floor to Ceiling
Doors and Pilasters:• HPL bonded onto 44mm MR core
• Rebated Hardwood Edges, sealed 2 coats AC Lacquer
Divisions Specification:• High Pressure Laminate bonded onto 36mm MR core
• Matching laminate edge detail
Standard Dimensions:• UPTO 2400mm overall height x 1500mm‐2000mm deep
(horizontal joint to suit)
Ironmongery:• Continuous 'T' section Pilaster fixing channel
• 11/2 pairs Self Closing Butt Hinges
• Recessed Deadbolt, Indicator and Keep
Ref: T209/F1 and A9706S
• 38mm 'U' section floor channel
• Coat Hook - Ref:T501
• Rear wall 'T' section division fixing channel
• Continuous Floor 'U' section division fixing channel
(Excludes Toilet Roll Holder)
44 Flush Cubicle - 2100mm High
Doors and Pilasters• HPL bonded onto 44mm MR core - 1962mm panel height
• Rebated Hardwood Edges, sealed 2 coats AC Lacquer
Divisions Specification:• HPL bonded onto 18mm MR core 1962mm panel height
• Matching laminate edge detail
Standard Dimensions:• 2100mm overall height (100MM LEG) x 1500mm - 2000mm deep
(horizontal joint to suit)
Ironmongery:• Continuous 'T' section Pilaster fixing channel
• 11/2 pairs Self Closing Butt Hinges
• Recessed Deadbolt, Indicator and Keep
Ref: T209/F1 and A9706S
• 38mm 'U' section Headrail
• Coat Hook - Ref:T501
• Rear wall 'T' section division fixing channel
• Leg - Ref:T311
(Excludes Toilet Roll Holder)
Flush44 - Typical Layout & Specification Options
Ironmongery Finish: Satin Stainless Steel as standard
Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection
Special Notes: UPTO 2700mm overall height available at additional cost
Outward openg doors complete with back to back Stainless Steel 'D' Handles
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
T-Line
2 3 41
1. Headrail Junction Detail
2. SAA Indicator Faceplate
3. Outward Open Pivot Hinge
4. SAA Leg
Office HQ, Leicestershire
6 T-Line Cubicle Range
The modern & minimalist cubicle solution.The T-Line cubicle range has been created to meet the most discerning specifiers’
requirements. Bringing a modern feel to the washroom environment in the form of Extruded
Satin Anodised Aluminium pilasters and headrail offering a true slimline appearance.
Cubicle & Washroom Specialist 7
T LINE 30mm HPL CUBICLES
Pilasters and Headrail:• Extruded SAA Aluminium Profiles ‐
T Pilasters/U Headrails
Doors & Divisions Panel Specification:• Doors ‐ HPL bonded onto 30mm MR core
• Divisions ‐ HPL bonded onto 18mm
MR core
• 2mm PVC edge finish
Standard Dimensions:• 2090mm overall height (including
150mm ground clearance) x 1500mm ‐
2000mm deep
Ironmongery:• Rise & fall aluminium hinges ‐ Ref: EXCH20
• Pivot Hinge to outward opening doors
• Recessed Indicator & Keep ‐ Ref: EXL30
• Leg 150mm ‐ Ref: EXLEG/11
• Coat Hook ‐ Ref:EXCOAT20
• Brackets ‐ Ref: EXB3/5
(Excludes Toilet Roll Holder)
T LINE 12mm COMPACT CUBICLES
Pilasters and Headrail:• Extruded SAA Aluminium Profiles ‐
T Pilasters/U Headrails
Doors & Divisions Panel Specification:• 12mm compact solid grade laminate
• Black core radius & polished edge finish
Standard Dimensions:• 2090mm overall height (including
150mm ground clearance) x 1500mm ‐
2000mm deep
Ironmongery:• Rise & fall aluminium hinges Ref: EXCH13
• Pivot Hinge to outward opening doors
• Recessed Indicator & Keep ‐ Ref: EXL13
• Leg 150mm ‐ Ref: EXLEG/11
• Coat Hook ‐ Ref:EXCOAT13
• Brackets ‐ Ref: EXB3/7 and EXB3/8
(Excludes Toilet Roll Holder)
T LINE 19mm MFC CUBICLES
Pilasters and Headrail:• Extruded SAA Aluminium Profiles ‐
T Pilasters/U Headrails
Doors & Divisions Panel Specification:• 19mm Melamine Faced Chipboard
• 2mm PVC edge finish
Standard Dimensions:• 2090mm overall height (including
150mm ground clearance) x 1500mm ‐
2000mm deep
Ironmongery:• Rise & fall aluminium hinges ‐ Ref: EXCH20
• Pivot Hinge to outward opening doors
• Recessed Indicator & Keep ‐ Ref: EXL20
• Leg 150mm ‐ Ref: EXLEG/11
• Coat Hook ‐ Ref:EXCOAT20
• Brackets ‐ Ref: EXB3/5
(Excludes Toilet Roll Holder)
T-Line - Typical Layout & Specification Options
Ironmongery Finish: Satin anodised aluminium as standard (powder coated available at additional cost).
Full Height option available upon request (up to 3000mm).
Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection.
Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles and full length 'Z' Section door Stop/Keep.
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
The Senator range is a perfect solution where the client requires a ‘touch of class’ and is
equally at home in all environments ranging from prestigious office developments, schools,
colleges and leisure facilities.
Senator
2 3 41
1. Headrail Junction Detail
2. SAA Indicator Faceplate
3. SAA Indicator & Keep
4. D Handle
Co-op Distribution Centre, Andover
8 Senator Cubicle Range
An elegant & prestigious framed system.
Cubicle & Washroom Specialist 9
Senator 12mm Compact Cubicles
Pilasters & Headrail:• Elliptically profiled Extruded Aluminium
powder coat finished: select from
• Thorium, Titanium, Radon or Antique Silver
Doors & Divisions Panel Specification:• 12mm compact solid grade laminate
• Black core radius & polished edge finish
Standard Dimensions:• 2000mm overall height (including 150mm
ground clearance) x 1500mm - 2000mm
deep
Ironmongery:• Rise & fall aluminium hinges
Ref: CL13HID(2)
• Indicator & Keep - Ref: EXL13
• Leg 150mm - Ref: CLEAR2/7COMP
• Coat Hook - Ref:CLEAR13CH
• Brackets - Ref: SGL WM3/7 Pack
(Excludes Toilet Roll Holder)
Senator 20mm HPL Cubicles
Pilasters & Headrail:• Elliptically profiled Extruded Aluminium
powder coat finished: select from
• Thorium, Titanium, Radon or Antique Silver
Doors & Divisions Panel Specification:• HPL bonded onto 18mm MR core
• 2mm PVC edge finish
Standard Dimensions:• 2000mm overall height (including 150mm
ground clearance) x 1500mm - 2000mm
deep
Ironmongery:• Rise & fall aluminium hinges
Ref: CL21HID(2)
• Indicator and Keep - Ref: EXL20
• Leg 150mm - Ref: CLEAR2/7COMP
• Coat Hook - Ref:CLEAR20CH
• Brackets - Ref: WM3/5 Pack
(Excludes Toilet Roll Holder)
Senator 19mm MFC Cubicles
Pilasters & Headrail:• Elliptically profiled Extruded Aluminium
powder coat finished: select from
• Thorium, Titanium, Radon or Antique Silver
Doors & Divisions Panel Specification:• 19mm Melamine Faced Chipboard
• 2mm PVC edge finish
Standard Dimensions:• 2000mm overall height (including 150mm
ground clearance) x 1500mm - 2000mm
deep
Ironmongery:• Rise and fall aluminium hinges
Ref: CL21HID(2)
• Indicator and Keep - Ref: DL320O
• Leg 150mm - Ref: CLEAR2/7COMP
• Coat Hook - Ref:CLEAR20CH
• Brackets - Ref: WM3/5 Pack
(Excludes Toilet Roll Holder)
Senator - Typical Layout & Specification Options
Ironmongery Finish: Powder coated to match pilasters and headrail.
Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection
Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles and full length 'Z' Section door Stop/Keep
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
Meeting the demands of modern education and mixed use environments, Skyline is a floor
to ceiling system providing the user with maximum privacy and comfort. A full range of
complimentary duct panels and vanity units are available on request.
Skyline
2 3 41
1. Indicator & Keep
2. Pilaster Floor Channel
3. Indicator Face Plate
4. Inside Cubicle View
Holly Lodge School, Birmingham
10 Skyline Cubicle Range
The elegant & discreet full height system.
Cubicle & Washroom Specialist 11
Skyline 12mm SGL Cubicles
(Floor to ceiling)
Doors, Divisions & Pilasters
Panel Specification:• 12mm compact solid grade laminate
• Black core radius & polished edge finish
Standard Dimensions:• 2600mm (max.) floor to ceiling height
x 1500mm - 2000mm deep
Ironmongery:• Rise and fall aluminium hinges
Ref: EXCH13
• Recessed Indicator and Keep
Ref: EXL13
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT13
• Brackets - Ref: EXB3/7 & EXB3/8
• Headrail - Ref: P12/P15
(Excludes Toilet Roll Holder)
Skyline 20mm HPL Cubicles
(Floor to ceiling)
Doors, Divisions & Pilasters
Panel Specification:• HPL bonded onto 18mm MR core
• 2mm PVC edge finish
Standard Dimensions:• 2600mm (max.) floor to ceiling height
x 1500mm - 2000mm deep
Ironmongery:• Rise and fall aluminium hinges
Ref: EXCH20
• Recessed Indicator and Keep
Ref: EXL20
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT20
• Brackets - Ref: EXB3/5
• Headrail - Ref: P12/P15
(Excludes Toilet Roll Holder)
Skyline 19mm MFC Cubicles
(Floor to ceiling)
Doors, Divisions & Pilasters
Panel Specification:• 19mm Melamine Faced Chipboard
• 2mm PVC edge finish
Standard Dimensions:• 2600mm (max.) floor to ceiling height
x 1500mm - 2000mm deep
Ironmongery:• Rise and fall aluminium hinges
Ref: EXCH20
• Recessed Indicator and Keep
Ref: EXL20
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT20
• Brackets - Ref: EXB3/5
• Headrail - Ref: P12/P15
(Excludes Toilet Roll Holder)
Skyline - Typical Layout & Specification Options
Ironmongery Finish: Satin anodised aluminium as standard (powder coated available at additional cost).
Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection
Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles and full length 'Z' Section door Stop/Keep
Partitions are supplied in 2 pieces to meet CDM/Manual Handling constraints.
Partitions fitted into floor fixed U channel and finished 10mm below ceiling. Headrail detail fitted to top of pilaster internal face.
Pilaster fitted into 12mm profiled floor channel.
3000mm overall height available at additional cost (Subject to colour selection).
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
Hydroline Cubicles - The only choice for the serious leisure operator, cost effective, low
maintenance, long life span (in excess of ten years) and above all good looks. Designed for
use in demanding municipal changing areas, washrooms and public toilets
Hydroline
2 3 41
1. Leg & Hinge Details
2. Indicator Faceplate
3. Headrail Endcap
4. D Handle
Bilston Leisure Centre, West Midlands
12 Hydroline Cubicle Range
Robust high performance self supported system.
Cubicle & Washroom Specialist 13
Hydroline Tubular Framed 12mm SGL Cubicles
Doors, Divisions & Pilaster Infils Panel Specification:• 12mm compact solid grade laminate
• Black core radius & polished edge finish
Standard Dimensions:• 1980mm overall height (c/w 150mm leg) x 1500mm
• Increased height radius profiled divisions (upto 2600mm high) available at additional cost
Framework Detail:• Hydroline is a fully framed tubular system manufactured from non-corrosive materials suitable for wet and dry areas.
Framework Colour Options:• RAL 9016 White; RAL 9001 Pearl White; RAL 9011 Black; RAL BS; 00A05 Steel Silver
Ironmongery:• Rise and fall extruded channel continuous hinge
• Snib Turn Indicator and Keep
• Pilaster extrusion incorporating 150mm Leg
• Coat Hook
• Continuous wall channel Brackets
• Headrail
• Headrail End Caps
(Excludes Toilet Roll Holder)
Hydroline - Typical Layout & Specification Options
Ironmongery Finish: RAL 9016 White; RAL 9001 Pearl White; RAL 9011 Black; RAL BS; 00A05 Steel Silver
Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection
Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles.
Increased height radius profiled divisions (upto 2600mm high) available at additional cost
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
The Mariner Range is ideal for harsh environments utilising vandal & water resistant
compact solid grade laminate. Multiple hardware options offer greater design flexibilty.
The Mariner range offers an extended life cycle under usage conditions.
Mariner
2 3 41
1. SAA Headrail & End Cap
2. SAA Indicator Faceplate
3. SAA Indicator & Keep
4. SAA Leg
Alexander Stadium, Birmingham
14 Mariner Cubicle Range
Hard wearing resistant & durable cubicle system.
Cubicle & Washroom Specialist 15
Mariner 12mm SAA Compact Cubicles
Doors, Divisions & Pilasters Panel Specification:• 12mm compact solid grade laminate
• Black core radius & polished edge finish
Standard Dimensions:
Option A: 2050mm overall height (c/w 150mm leg)
x 1500mm - 2000mm deep
Option B: 1950mm overall height (c/w 150mm leg) x 1500mm deep
All Heights Subject to Material/Colour Selection
SAA Ironmongery:• Rise and fall aluminium hinges - Ref: EXCH13
• Recessed Indicator and Keep - Ref: EXL13
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT13
• Brackets - Ref: EXB3/7 and EXB3/8
• Headrail - Ref: EXPHR13
• Headrail End Caps - Ref: EXHREND
(Excludes Toilet Roll Holder)
Mariner 12mm Stainless Steel Compact Cubicles
Doors, Divisions & Pilasters Panel Specification:• 12mm compact solid grade laminate
• Black core radius & polished edge finish
Standard Dimensions:
Option A: 2050mm overall height (c/w 150mm leg)
x 1500mm - 2000mm deep
Option B: 1950mm overall height (c/w 150mm leg) x 1500mm deep
All Heights Subject to Material/Colour Selection
Stainless Steal Ironmongery:• Rise & fall aluminium hinges - Ref: T100 L or T100 R
(to suit handing)
• Indicator and Keep - Ref: T201L or T201R / keep T250/buffer T950
• Leg 150mm - Ref: T300
• Coat Hook - Ref: T520
• Brackets - Ref: T410
• Headrail - Ref: EXPHR13
• Headrail End Caps - Ref: EXHREND
(Excludes Toilet Roll Holder)
Mariner - Typical Layout & Specification Options
Ironmongery Finish: As specification options above.
Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection
Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles and full length 'Z' Section door Stop/Keep
All Heights Subject to Material/Colour Selection
Woodgrain Doors Max. 1960mm overall height (incl. 150mm grd. Clearance)
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
The Select Range is a tried and tested cubicle system comprising of high pressure laminate
faced components, incorporating Excelsior's own Satin Anodised Aluminium range of
Ironmongery as standard.
Select
2 3 41
1. SAA Headrail & End Cap
2. SAA Indicator Faceplate
3. SAA Indicator & Keep
4. SAA Leg
Sandwell College, West Midlands
16 Select Cubicle Range
An efficient, practical & robust cubicle system.
Cubicle & Washroom Specialist 17
Select 20mm HPL Cubicles
Doors, Divisions & Pilasters Panel Specification:• High Pressure Laminate bonded onto 18mm MR core
• 2mm PVC edge finish
Standard Dimensions:• 2050mm overall height (including 150mm ground clearance) x 1500mm - 2000mm deep
All Heights Subject to Material/Colour Selection
Ironmongery:• Rise and fall aluminium hinges - Ref: EXCH20
• Recessed Indicator and Keep - Ref: EXL20
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT20
• Brackets - Ref: EXB3/5
• Headrail - Ref: EXPHR20
• Headrail End Caps - Ref: EXHREND
(Excludes Toilet Roll Holder)
Select - Typical Layout & Specification Options
Ironmongery Finish: Satin anodised aluminium as standard, powder coated (available at additional cost).
Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection
Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles and full length 'Z' Section door Stop/Keep
All Heights Subject to Material/Colour Selection
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
The Excelsior Entasis cubicle range utilises the inclusion of satin anodised aluminium,
extrusions vertically fixed to the cubicle pilasters for additional strength and protection.
Ideal for use in high volume traffic areas.
Entasis
2 3 41
1. SAA Headrail & End Cap
2. SAA Indicator Faceplate
3. SAA Indicator & Keep
4. SAA Leg
18 Entasis Cubicle Range
The cubicle system built for hard knocks.
Cubicle & Washroom Specialist 19
Entasis - Typical Layout & Specification Options
Entasis 12mm SGL Cubicles
Framework & Headrail• SAA D section headrail extrusion
• SAA P section pilaster frame extrusion
Doors, Divisions & Pilaster Infills
Panel Specification:• 12mm compact solid grade laminate
• Black core radius & polished edge finish
Standard Dimensions:• 2050mm overall height (c/w 150mm leg)
x 1500mm - 2000mm deep
Ironmongery:• Rise and fall aluminium hinges
Ref: EXCH13
• Recessed Indicator and Keep
Ref: EXL13
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT13
• Brackets - Ref: EXB3/7 & EXB3/8
(Excludes Toilet Roll Holder)
Entasis 20mm HPL Cubicles
Framework & Headrail• SAA D section headrail extrusion
• SAA P section pilaster frame extrusion
Doors, Divisions & Pilaster Infills
Panel Specification:• High Pressure Laminate bonded onto
18mm MR core
• 2mm PVC edge finish
Standard Dimensions:• 2050mm overall height (c/w 150mm leg)
x 1500mm - 2000mm deep
Ironmongery:• Rise and fall aluminium hinges
Ref: EXCH20
• Recessed Indicator and Keep
Ref: EXL20
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT20
• Brackets - Ref: EXB3/5
(Excludes Toilet Roll Holder)
Entasis 19mm MFC Cubicles
Framework & Headrail• SAA D section headrail extrusion
• SAA P section pilaster frame extrusion
Doors, Divisions & Pilaster Infills
Panel Specification:• 19mm Melamine Faced Chipboard
• 2mm PVC edge finish
Standard Dimensions:• 2050mm overall height (c/w 150mm leg)
x 1500mm - 2000mm deep
Ironmongery:• Rise and fall aluminium hinges
Ref: EXCH20
• Recessed Indicator and Keep
Ref: EXL20
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT20
• Brackets - Ref: EXB3/5
(Excludes Toilet Roll Holder)
Ironmongery Finish: Satin anodised aluminium as standard (powder coated available at additional cost).
Colour Selections: Excelsior Polyrey Cubicle & Washroom Colour Selection
Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles and full length 'Z' Section door Stop/Keep
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
All Heights Subject to Material/Colour Selection
The Classik Range is ideal for office environments, the system incorporates post formed
laminate pilasters providing an aesthetically pleasing smooth and sleek appearance.
Suitable for medium dry use environments.
Classik
Offices, Stratford Upon Avon
20 Classik Cubicle Range
The stylish & sophisticated cubicle solution.
2 3 41
1. SAA Headrail & End Cap
2. SAA Indicator Faceplate
3. SAA Indicator & Keep
4. SAA Leg
Cubicle & Washroom Specialist 21
Classik HPL Cubicles
Door & Division Panel Specifications:• High Pressure Laminate bonded onto 18mm MR core
• 2mm PVC edge finish
Panel Specification:
Pilaster Panel Specifications:• High Pressure Laminate bonded onto 28mm MR core
• Postformed Vertical Edges
Standard Dimensions:• 2050mm overall height (including 150mm ground clearance) x 1500mm - 2000mm deep
All Heights Subject to Material/Colour Selection
Ironmongery:• Rise and fall aluminium hinges - Ref: EXCH20
• Recessed Indicator and Keep - Ref: EXL20
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT20
• Brackets - Ref: EXB3/5
• Headrail - Ref: EXPHR20
• Headrail End Caps - Ref: EXHREND
(Excludes Toilet Roll Holder)
Classik - Typical Layout & Specification Options
Ironmongery Finish: Satin anodised aluminium as standard, powder coated (available at additional cost).
Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection
Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles and full length 'Z' Section door Stop/Keep
All Heights Subject to Material/Colour Selection
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
The Option Range is one of Excelsior’s most popular and long standing cubicle systems,
utilising 19mm melamine faced chipboard offering a price economy to suit all budgets.
Suitable for light to medium use environments.
Option
2 3 41
1. Option Headrail
2. Option Indicator Faceplate
3. Option U Bracket
4. Option Leg
Office Development, Birmingham
22 Option Cubicle Range
The clean, economic & versatile cubicle system.
Cubicle & Washroom Specialist 23
Option 19mm MFC Cubicles
Doors, Divisions & Pilasters Panel Specification:
• 19mm Melamine Faced Chipboard
• Matching or contrasting 2mm PVC edge finish
Standard Dimensions:
• 2050mm overall height (including 150mm ground clearance) x 1500mm - 2000mm deep
Ironmongery:
• Rise and fall aluminium hinges - Ref: EXCH20
• Indicator and Keep - Ref: BH1-1
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT20
• Brackets - Ref: EXB3/5
• Headrail - Ref: 20mm 'L' Section
(Excludes Toilet Roll Holder)
Option - Typical Layout & Specification Options
Ironmongery Finish: Satin anodised aluminium as standard, powder coated (available at additional cost).
Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection
Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles and full length 'Z' Section door Stop/Keep
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
Excelsior’s flexible children’s cubicle range. Available in various design options to suit any
budget for school and nursery environments. Specifically designed with children in mind,
the low level profiled curves to the doors and partitions enable adult supervision.
Harlequin
24 Harlequin Cubicle Range
The practical vibrant & versatile children’s range.
2 3 41
1. SAA Headrail & End Cap
2. SAA Indicator Faceplate
3. SAA Indicator & Keep
4. SAA Leg
Cubicle & Washroom Specialist 25
Panels: Doors, Pilasters and Divisions• 12mm Compact Solid Grade Laminate
• Black core radius & polished edge finish
Standard Dimensions:• Pilasters 2050mm overall height inc.150mm floor clearance
• 1500mm-1800mm deep
Profiles:• Doors - Curved tops at low level height.
• Partitions - Sloping to low level at rear wall.
Recommended Low Level Heights:• Nursery (Pre-School) - 1350mm FFL
• Key Stage 1 (Age 5-7; Years 1 & 2) - 1500mm FFL
• Key Stage 2 (Age 7-11; Years 3, 4, 5 & 6) - 2050mm FFL
• Key Stages 3 &4 (Age 11-16) - 2050mm FFL
Ironmongery:• Rise and fall aluminium hinges - Ref: EXCH13
• Recessed Indicator and Keep - Ref: EXL13
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT13
• Brackets - Ref: EXB3/7 and EXB3/8
• Headrail - Ref: EXPHR13
• Headrail End Caps - Ref: EXHREND
(Excludes Toilet Roll Holder)
Ironmongery & Headrail Finish:• Satin Anodised Aluminium as standard.
• Red, Yellow or Blue powder coat finish at additional cost
Colour Selection:• Excelsior Prefered Cubicle & Washroom Selection
• Digital print designs available at extra cost.
Harlequin Mariner Cubicle Range
Panels: Doors, Pilasters and Divisions• Laminated 18mm MR MDF
• All edges are lipped in high impact 2mm PVC
Standard Dimensions:• Pilasters 2050mm overall height inc.150mm floor clearance
• 1500mm-1800mm deep
Profiles:• Doors - Curved tops at low level height
• Partitions - Sloping to low level at rear wall
Recommended Low Level Heights:• Nursery (Pre-School) - 1350mm FFL
• Key Stage 1 (Age 5-7; Years 1 & 2) - 1500mm FFL
• Key Stage 2 (Age 7-11; Years 3, 4, 5 & 6) - 2050mm FFL
• Key Stages 3 &4 (Age 11-16) - 2050mm FFL
Ironmongery:• Rise and fall aluminium hinges - Ref: EXCH20
• Recessed Indicator and Keep - Ref: EXL20
• Leg 150mm - Ref: EXLEG/11
• Coat Hook - Ref:EXCOAT20
• Brackets - Ref: EXB3/5
• Headrail - Ref: EXPHR20
• Headrail End Caps - Ref: EXHREND
(Excludes Toilet Roll Holder)
Ironmongery & Headrail Finish:• Satin Anodised Aluminium as standard.
• Red, Yellow or Blue powder coat finish at additional cost
Colour Selection:• Excelsior Prefered Cubicle & Washroom Selection
• Digital print designs available at extra cost.
Harlequin Select Cubicle Range
26 Harlequin Cubicle Range
‘Peardrop’ low level option• A safe & practical range for children of nursery and pre-school age.
• No sharp edges or corners.
• The Peardrop profile can be provided at low level without the requirement of a headrail support,
however the floor construction must provide the necessary fixing strength.
• Tough, easy to clean, durable finish.
• Suitable for all dry washroom environments.
Panels: Doors, Pilasters and Divisions• Laminated 18mm MR MDF
• All edges are lipped in high impact 2mm PVC
Standard Dimensions:•·Nursery Height: 1350mm F.F.L. inc. 150mm floor clearance
Profiles:•·Low level 'Peardrop' profile pilasters
•·Low level doors & partitions
•·The system is supported by the peardrop leg support frame
Ironmongery:•·Rise and fall aluminium hinges - Ref: EXCH20
•·Recessed Indicator and Keep - Ref: EXL20
•·Leg/ Peardrop support frame 150mm - Ref: EXLEG/11
•·Coat Hook - Ref:EXCOAT20
• Brackets - Ref: EXB3/5
(Excludes Toilet Roll Holder & Coat Hook)
Ironmongery Finish:•·Satin Anodised Aluminium as standard.
•·Red, Yellow or Blue powder coat finish at additional cost
Colour Selection:•·Excelsior Prefered Cubicle & Washroom Selection
Please Note:• Digital print designs available at extra cost.
•·Magnetic door catch available instead of indicator bolt
•·The ability of this leg to perform is totally reliant on the strength
of the floor & fascia fixing. Excelsior have tested the product on
a solid concrete floor where it was proven fit for purpose. The
product utilises 2Nr 75mm x 8mm screwbolts to secure to the
floor. It remains the responsibility of the user to ensure that the
construction of the floor is suitable for this type of application.
Harlequin Peardrop Cubicle Range
Jungle
1
Circus
2
Under The Sea
3
Art Attack
4
Digital Print Door Options
Cubicle & Washroom Specialist 27
At Excelsior we offer an extensive range of fully framed Vanity Units providing our customers
an excellent selection of worktop surface finishes to suit all environments. A solution for all
budgetary and specification requirements, always with quality and durability in mind.
Vanity UnitsDurable & attractive vanity unit surface finishes.
Select Plus Solid Surface/HPL
Vanity Unit Range
Profile Options:
SSIN1 - 560mm bed depth x 800mm o/a
height (75mm upstand) To suit Inset WHB
SSIN2 - 560mm bed depth x 800mm o/a
height (no rear upstand) To suit Inset WHB
SSSR1 - 315mm bed depth x 800mm o/a
height (75mm upstand)
To suit Semi-recessed WHB
SSSR2 - 315mm bed depth x 800mm o/a
height (no rear upstand)
To suit Semi-recessed WHB
Worktop Specification:• 13mm Solid Surface c/w 18mm MR MDF
core substrate
• Seamless integral rear upstand and front
downstand
Panel Specification:• High Pressure Laminate bonded onto
18mm MR MDF core
• Panels post lipped with 2mm PVC edge
finish or Postformed Vertical edges (at add.
cost)
• Underpanels Fascia/ Shadowgaps:
Dry Areas:• High Pressure Laminate bonded onto
18mm MR MDF Core
• Plinth incorporates 1mm PVC edge detail
at floor junction to prevent moisture
ingress
• All remaining egdes as cut
Frame Construction/System Support:• Sole Plate - 25mm WBP plywood (to be
packed level)
• Worktop Subframe - 18/36mm MR MDF
pre-assembled frame
• Panels pre-hung onto Underpanel fascia
using nylon Ke-Ku clips (hook on or push
fit to suit)
• Hinged access panels c/w keyed budget
lock available at additional cost
Colour Selections:• Excelsior Prefered Cubicle
& Washroom Range
Mariner SGL Vanity Unit Range
Profile Options:
SGIN1 - 600mm bed depth x 800mm o/a
height (75mm upstand) To suit Inset WHB
SGIN2 - 600mm bed depth x 800mm o/a
height (no rear upstand) To suit Inset WHB
SGSR1 - 315mm bed depth x 800mm o/a
height (75mm upstand)
To suit Semi-recessed WHB
SGSR2 - 315mm bed depth x 800mm o/a
height (no rear upstand)
To suit Semi-recessed WHB
Worktop Specification:• 10mm compact solid grade laminate
• Special CNC and post-formed integral rear
upstand and front downstand
Panel Specification:• 13mm compact solid grade laminate
• Black core radius & polished edge finish
Underpanels Fascia/Shadowgaps:
Dry Areas:• High Pressure Laminate bonded onto
18mm MR MDF Core
• Plinth incorporates 1mm PVC edge detail
at floor junction to prevent moisture
ingress
• All remaining egdes as cut
Wet Areas:• 13mm compact solid grade laminate
• Black core edges as cut
Frame Construction/System Support:• Sole Plate - 25mm WBP plywood (to be
packed level)
• Worktop Subframe - 18/36mm MR MDF
pre-assembled frame
• Panels pre-hung onto Underpanel fascia
using nylon Ke-Ku clips (hook on or push
fit to suit)
• Hinged access panels c/w keyed budget
lock available at additional cost
Colour Selections:• Excelsior Prefered Cubicle
& Washroom Range
Select HPL Vanity Unit Range
Profile Options:
HPIN1 - 600mm bed depth x 800mm o/a
height (75mm upstand) To suit Inset WHB
HPIN2 - 600mm bed depth x 800mm o/a
height (no rear upstand) To suit Inset WHB
HPSR1 - 315mm bed depth x 800mm o/a
height (75mm upstand)
To suit Semi-recessed WHB
HPSR2 - 315mm bed depth x 800mm o/a
height (no rear upstand) To suit Semi-
recessed WHB
Worktop Specification:• High Pressure Laminate bonded onto
18mm MR MDF core
• Post-formed integral rear upstand and
front downstand
Panel Specification:
• High Pressure Laminate bonded onto
18mm MR MDF core
• Panels post lipped with 2mm PVC edge
finish or Postformed Vertical edges
(at additional cost)
Underpanels Fascia/ Shadowgaps:
Dry Areas:• High Pressure Laminate bonded onto
18mm MR MDF Core
• Plinth incorporates 1mm PVC edge detail
at floor junction to prevent moisture
ingress
• All remaining egdes as cut
Frame Construction/System Support:• Sole Plate - 25mm WBP plywood (to be
packed level)
• Worktop Subframe - 18/36mm MR MDF
pre-assembled frame
• Panels pre-hung onto Underpanel fascia
using nylon Ke-Ku clips (hook on or push
fit to suit)
• Hinged access panels c/w keyed budget
lock available at additional cost
Colour Selections:• Excelsior Prefered Cubicle
& Washroom Range
Vanity Units - Specifications
28 Vanity Unit Ranges
Mariner SGL Vanity Unit RangeSelect Plus Vanity Unit Range Select HPL Vanity Unit Range
Cubicle & Washroom Specialist 29
Vanity Units - Typical Layout Options
Select Plus Solid Surface/HPL Vanity Units - Typical Profiles
Mariner SGL Vanity Units - Typical Profiles
Select HPL Vanity Units - Typical Profiles
Mariner SGL Vanity Unit RangeSelect Plus Vanity Unit Range Select HPL Vanity Unit Range
At Excelsior we offer fully framed, pre-hung washroom duct and wall panel systems with
all face panels factory mounted onto either timber or metal subframe systems. (To suit
environment conditions)
Duct Panelling
30 Duct Panelling Range
The complete pre-hung duct panelling solution.
Cubicle & Washroom Specialist 31
Mariner 12mm SGL Range
Duct Panelling (Wood Frame)
Full Height Panel Specification:• 12mm compact solid grade laminate
• Black core radius & polished edge finish
• Panels split to suit sanitaryware
Plinth/ Shadowgaps:
Dry Areas:• High Pressure Laminate bonded onto
18mm MR MDF or 19mm MFC
• Plinth incorporates 1mm PVC edge detail
at floor junction to prevent moisture
ingress
• All remaining egdes as cut
Wet Areas:• 13mm compact solid grade laminate
• Black core edges as cut
Frame Construction/System Support:• Sole Plate - 25mm WBP plywood
(to be packed level)
• Subframe - 18/36mm MR MDF
pre-assembled frame
• Panels pre-hung onto subframe using
nylon Ke-Ku clips (hook on or push fit
to suit)
• Hinged access panels c/w keyed budget
lock available at additional cost
Colour Selections:• Excelsior Prefered Cubicle
& Washroom Range
Special Notes:• Excelsior COATED METAL FRAME
SYSTEM recommended for wet
area useage.
• Excelsior standard support systems may
not be compatible with all sanitary flushing
systems, therefore please enquire prior to
placing order to ensure adaptations can be
incorporated.
• Hinged access panels c/w keyed budget
lock available at additional cost
Select 20mm HPL Range
Duct Panelling (Wood Frame)
Full Height Panel Specification:• High Pressure Laminate bonded onto
18mm MR MDF
• Panels post lipped with 2mm PVC edge
finish or (Postformed Vertical edges at
additional cost)
• Panels split to suit sanitaryware
Plinth/ Shadowgaps:• High Pressure Laminate bonded onto
18mm MR MDF or 19mm MFC
• Plinth incorporates 1mm PVC edge detail
at floor junction to prevent moisture
ingress
• All remaining egdes as cut
Frame Construction/System Support:• Sole Plate - 25mm WBP plywood (to be
packed level)
• Subframe - 18/36mm MR MDF pre-
assembled frame
• Panels pre-hung onto subframe using
nylon Ke-Ku clips (hook on or push fit
to suit)
• Hinged access panels c/w keyed budget
lock available at additional cost
Colour Selections:• Excelsior Prefered Cubicle
& Washroom Range
Special Notes:• Post-formed vertical panel edges available
at additional cost
• Excelsior standard support systems may
not be compatible with all sanitary flushing
systems, therefore please enquire prior to
placing order to ensure adaptations can be
incorporated.
• Hinged access panels c/w keyed budget
lock available at additional cost
Option 19mm MFC Range
Duct Panelling (Wood Frame)
Full Height Panel Specification:• 19mm Melamine Faced Chipboard
• Matching or contrasting 2mm PVC
edge finish
• Panels split to suit sanitaryware
Plinth/ Shadowgaps:• 19mm Melamine Faced Chipboard
• Plinth incorporates 1mm PVC edge detail
at floor junction to prevent moisture
ingress
• All remaining egdes as cut
Frame Construction/System Support:• Sole Plate ‐ 25mm WBP plywood
(to be packed level)
• Subframe ‐ 18/36mm MR MDF
pre‐assembled frame
• Panels pre‐hung onto subframe using
nylon Ke‐Ku clips (hook on or push fit
to suit)
• Hinged access panels c/w keyed budget
lock available at additional cost
Colour Selections:• Excelsior Prefered Cubicle
& Washroom Range
Special Notes:• Excelsior standard support systems may
not be compatible with all sanitary flushing
systems, therefore please enquire prior to
placing order to ensure adaptations can be
incorporated.
• Hinged access panels c/w keyed budget
lock available at additional cost
Duct Panelling - Typical Layout & Specification Options
Excelsior GALVANISED COATED METAL FRAME SYSTEM available for wet and dry areas to suit clients requirements
At Excelsior we offer a number of sector related pre-hung duct panel solutions to meet all
your healthcare requirements, including hospitals, clinical surguries and acute facilities.
Further more we are able to offer the provision of pre-plumbed sanitary ware if desired.
Healthcare Duct Panelling
32 Healthcare Duct Panelling Range
Sector proven Healthcare duct panelling solution.
Cubicle & Washroom Specialist 33
Mariner 12mm SGL Range
Duct Panelling (Wood Frame)
Full Height Panel Specification:• 12mm compact solid grade laminate
• Black core radius & polished edge finish
• Panels split to suit sanitaryware
Plinth/ Shadowgaps:
Dry Areas:• High Pressure Laminate bonded onto 18mm MR MDF
or 19mm MFC
• Plinth incorporates 1mm PVC edge detail at floor junction to
prevent moisture ingress
• All remaining egdes as cut
Wet Areas:• 13mm compact solid grade laminate
• Black core edges as cut
Frame Construction/System Support:• Sole Plate - 25mm WBP plywood (to be packed level)
• Subframe - 18/36mm MR MDF pre-assembled frame
• Panels pre-hung onto subframe using nylon Ke-Ku clips
(hook on or push fit to suit)
• Hinged access panels c/w keyed budget lock available at
additional cost
Colour Selections:• Excelsior Prefered Cubicle & Washroom Range
Special Notes:• Excelsior COATED METAL FRAME SYSTEM recommended for
wet area useage.
• Excelsior standard support systems may not be compatible with
all sanitary flushing systems, therefore please enquire prior to
placing order to ensure adaptations can be incorporated.
• Hinged access panels c/w keyed budget lock available at
additional cost
Select 20mm HPL Range
Duct Panelling (Wood Frame)
Full Height Panel Specification:• High Pressure Laminate bonded onto 18mm MR MDF
• Panels come with postformed vertical edges and 2mm PVC
horizontal edges
• Panels split to suit sanitaryware
Plinth/ Shadowgaps:• High Pressure Laminate bonded onto 18mm MR MDF
or 19mm MFC
• Plinth incorporates 1mm PVC edge detail at floor junction to
prevent moisture ingress
• All remaining egdes as cut
Frame Construction/System Support:• Sole Plate - 25mm WBP plywood (to be packed level)
• Subframe - 18/36mm MR MDF pre-assembled frame
• Panels pre-hung onto subframe using nylon Ke-Ku clips
(hook on or push fit to suit)
• Hinged access panels c/w keyed budget lock available at
additional cost
Colour Selections:• Excelsior Prefered Cubicle& Washroom Range
Special Notes:• Excelsior standard support systems may not be compatible with
all sanitary flushing systems, therefore please enquire prior to
placing order to ensure adaptations can be incorporated.
• Hinged access panels c/w keyed budget lock available at
additional cost
Healthcare Duct Panelling - Typical Layout & Specification Options
Excelsior GALVANISED COATED METAL FRAME SYSTEM available for wet and dry areas to suit clients requirements
Excelsior healthcare panelling systems are fully compliant with HTM 68 panel specifications and NHS estate guidelines
Our extensive range of Lockers will satisfy all your changing area and personal storage
requirements. Specialising in the Leisure, Eduction and Workplace facility environments.
Included within our offer are three environment specific Locker ranges.
Lockers
2 3 41
1. Shock Lockers (Inset Doors)
2. Metal Perforated Lockers
3. Metal Lockers
4. Shock Lockers (Plant-On Doors)
34 Locker Range
Locker solutions for all environments.
Cubicle & Washroom Specialist 35
Excelsior
Hydroline Lockers
• Locker Bodies - Manufactured from
1.0mm thick Aluminium Sheet.
• Doors - Manufactured from 10mm Solid
Grade Laminated.
• Door Framework - Anodised Aluminium
Extrusion with full length inset polymer
strips.
• Shelving - High Impact Polymer.
• Hinges: Self closing Stainless Steel.
• Widths Available - 300mm & 400mm.
• Standard Height - 1800mm High
(Wheelchair Accessable Heights
also available).
• Depths Available - 500mm.
• Colours: Doors ‐ Selection from Excelsior
10mm preferred Laminate range.
• Locking Options - Cam Lock with 2 keys
as standard and number disc to door
(coin return, digital, combination and
hasp & staple also available at request).
• 150mm high metal powder coated stands
(silver grey) c/w adjustable feet available
upon request.
• Integral Hydroline Benching available
upon request.
Excelsior Probe
SGL Shock Lockers
• Locker Bodies - Manufactured from
0.7mm thick mild steel sheet
• Doors - Manufactured from 10mm Solid
Grade Laminated.
• Metal Bodies are coated with
Activecoat TM.
• Manufactuered in accordance with
BS4680:1996.
• Locking Options - Cam Lock with 2 keys
as standard and number disc to door
(coin return, digital, combination and
hasp & staple also available at request).
• Single tier lockers include top shelf and
double coat hook.
• Two tier lockers include dividing shelf and
double coat hooks.
• Three/Four/Five/Six tier lockers include
dividing shelves.
• Body Colours ‐ Silver Grey or Black.
• Door Colours ‐ Selection from Excelsior
10mm preferred laminate range.
• Widths Available - 305mm,
380mm & 460mm
• Standard Height - 1780mm High
(Wheelchair Accessable Heights
also available).
• Depths Available - 305mm,
380mm & 460mm
• 150mm high metal powder coated stands
(silver grey) c/w adjustable feet available
upon request.
• Integral Benching available upon request.
Excelsior Probe
Metal Lockers
• Lockers Bodies - Manufactured from
0.7mm thick mild steel sheet
• Doors - Manufactured from 0.9mm thick
mild steel doors.
• All bodies and doors are coated with
Activecoat TM.
• All Manufactuered in accordance with
BS4680:1996.
• Locking Options - Cam Lock with 2 keys
as standard and number disc to door
(coin return, digital, combination and
hasp & staple also available at request).
• Single tier lockers include top shelf and
double coat hook.
• Two tier lockers include dividing shelf and
double coat hooks.
• Three/ Four/ Five/ Six tier lockers include
dividing shelves.
• Body Colours ‐ Silver Grey or Black.
• Door Colours ‐ Red, Blue, Yellow, Green,
Silver & Smoke White.
• Widths Available - 305mm,
380mm & 460mm
• Standard Height - 1780mm High
(Wheelchair Accessable Heights
also available).
• Depths Available - 305mm,
380mm & 460mm
• 150mm high metal powder coated stands
(silver grey) c/w adjustable feet available
upon request.
• Integral Benching available upon request.
Locker - Typical Layout & Specification Options
Our extensive range of Bench Seating will satisfy all your changing area and cloakroom
requirements. Specialising in the Leisure, Eduction and Workplace facility environments.
Included within our offer are two specific seat options and ten frame permutations.
Bench Seating
36 Bench Seating Range
Bench solutions for all environments.
Cubicle & Washroom Specialist 37
Bench Seating - Typical Layout & Specification Options
Excelsior Hydroline Seat Benching
• Framework 38mm x 38mm Powder coated
Steel box section, c/w adjustable feet.
Seat Options:
• A - 25mm x 75mm Ash Hardwood Slats
finished with 2 coats of AC Lacquer.
• B - 12mm Solid grade laminate continuous
seat with radii machined edges.
Dimensions:
• Frame Heights bespoke to suit.
• Depth Options - 300mm & 400mm.
• Integral or loose coat hooks and rails
available upon request.
• Bespoke sizes available upon request.
Excelsior Hydroline Coat Rails
• Option A - 25mm Solid Ash Hardwood
Slats finished with 2 coats of AC
Lacqueror.
• Option B - 12mm Solid grade laminate.
• Coat Hooks - Nylon, SAA or Stainless
Steel available for selection.upon request.
Wall Mounted Bench Single Bench Cantilevered Wall Bench
295
TBA
Bench Frame Section Options
295
50
TBA
50
395
TBA
Seat Options400
7575
7575
25
395 295
300
7575
75 25
Frame Colours black or silver grey as standard (other colours available on request).
SPC/L300
395
TBA
SPC/L400 SPC/N300 SPC/N400
295
300
SPC/C300
39530
0
SPC/C400
1800
295
TBA
SPC/H300
395
1800
TBA
SPC/H400
1800
295 295
TBA
628
SPC/HD300
395395
1800
828
TBA
SPC/HD400
Single Island Bench Double Island Bench
400 Ash Slats 300 Ash Slats
400
12
395
12
300
295
400 SGL Slats 300 SGL Slats
38 Accessory Range
Washroom Accessories
At Excelsior we offer a full range of washroom accessories and sundry fittings to
compliment all of our cubicle ranges. From budget to high specifiaction we can cater for
all your accessory requirements.
The complete washroom accessories solution.
Cubicle & Washroom Specialist 39
Ref: B-4112
Soap Dispenser
Corrosion-resistant valve dispenses
commercial liquid hand soaps. Capacity:
1.2L. 180 (W) x 155 (H) x 85mm (D).
Ref: B-2111
Soap Dispenser Vertical
Corrosion-resistant valve dispenses
commercial liquid hand soaps. Capacity:
1.2L. 120 (W) x 205 (H) x 90mm (D).
Ref: BC361 - Stainless Steel
Soap Dispenser
Wall Mounterd 750ml Refillable Soap
Dispenser. 98mm (D) x 277mm (H)
x 76mm (Diameter).
Ref: WP101-1
Prestige Soap Dispenser
Single hand pull operation soap pump.
Lockable Dispenser. Refillable 700ml.
70mm (W) x 270mm (H) x 110mm (D)
Ref: DP806 - Prestige Counter
Mounted Soap Dispenser
Solid brass construction with high quality
bright chrome finish.
75mm (H) x 100mm (Projection).
Ref: B-8226 - Soap Dispenser -
150mm Spout
Bright-polished stainless steel. Corrosion
resistant. 50mm diameter x 100 (H)
x 175mm projection. Capacity: 1.0L.
Ref: B-8601 - Soap Dispenser
Panel Mounted
Panel-mounted, bright polished chrome
plated brass.dispenser.
Spout length: 85mm. Capacity: 1.0L.
Ref: B-532
Circular Waste Chute
Circular waste chute, satin-finish stainless
steel. 170 diameter x 100 (H) x 1mm
projection
Ref: B-715E 230V - Hand Dryer
Stainless Steel
Automatic hand dryer with deep drawn
satin-finish stainless steel cover.
295 (W) x 280 (H) x 140mm (D)
40 Accessory Range
Ref: B-43699 - Paper Towel
Dispenser and Waste Bin
Dispenses 350 C-fold or 475 multifold
towels. Capacity: 9.8L.
325 (W) x 715 (H) x 170mm projection
Ref: B-4262
Paper Towel Dispenser
Dispenses 400 C-fold or 525 multifold
towels (64-97mm deep).
275 (W) x 345 (H) x 125mm (D).
Ref: B-262
Paper Towel Dispenser
Dispenses 400 C-fold or 525 multifold
towels (79-97mm deep). Lockable door.
275 (W) x 355 (H) x 100mm (D)
Ref: B-2890 - Jumbo-Roll Toilet
Tissue Dispenser
Spindle holds one roll up to 255mm
diameter with 75mm diameter core.
270 diameter x 115mm (D)
Ref: B-2721
Toilet Tissue Cabinet
Dispenses either folded sheets of toilet
tissue. Capacity: 500-600 sheets.
130 (W) x 230 (H) x 110mm (D)
Ref: B-543
Toilet Tissue Dispenser
Accommodates one roll up to 127mm
diameter with a core size from 19-38mm.
10 diameter x 115 (H) x 35mm projection.
Ref: B-4354
Sanitary Bin
Self-closing door pulls down for access to
removable, leak-proof plastic waste
containers on both sides. Capacity: 4.6L.
325 (W) x 280 (H) x 36mm projection
Ref: B-277
Waste bin with LinerMate
Equipped with LinerMate to accommodate
disposable bin liner. Capacity: 48.3L.
Dimensions: 385 (W) x 585 (H) x 215mm (D)
Ref: B-279
Waste bin
Hooks hold reusable vinyl liner (provided).
Capacity: 24.2L.
355 (W) x 455 (H) x 150mm (D)
Cubicle & Washroom Specialist 41
Ref: 81009WB - Midi Jumbo Toilet
Paper Dispenser 10"
Suitable for rolls with a maximum width of
110mm and a core size between 45mm and
65mm. Maximum Diameter of roll 260mm.
Ref: 81014WB - Bulk Pack/Flat Pack
Toilet Tissue Dispenser
Suitable for multiflat or flat pack toilet tissue
up to 125mm in width, with a capacity of
230mm stack..
Ref: 81001WB - C/fold-Multi Fold
Hand Towel dispenser Large
Suitable for interleaved or centefold hand
towels up to 255mm wide, with a capcity
stack of 360mm.
Ref: 81003WB - C/fold-Multi Fold
Hand Towel Dispenser Small
Suitable for interleaved or centefold hand
towels up to 255mm wide, with a capcity
stack of 200mm.
Ref: 50801WB - Soap Dispenser
Refillable 0.9 litre
Lockable front cover and a sight window to
show when a refill is required. Capacity
900ml. Height 250mm Width 115mm
Depth 115mm
Ref: 84530WH
Metal Waste Bin
A sturdy durable 50ltr Free standing or wall
mounted, Waste bin spring loaded push flap
operation. Dimensions: Height 70.8cm
Width 33.5cm Depth 25.8cm
Ref: WC Door Signs
Male WC Ref: WCM01.
Female WC Ref: WCF02.
Unisex WC Ref: WCUN03.
Disabled WC Ref: WCD04.
Ref: KB110-SSWM-INB - Horizontal
Surface - Mounted Baby Changing
Station - Stainless Steel
Microban® anti-bacterial coating.
892mm (W) x 508mm (H) x 102mm
projection (488mm when opened)
Ref: KB200-05-INB - Horizontal
Baby Changing Station - White
Granite Effect Polypropylene
Microban® anti-bacterial coating.
889mm (W) x 565mm (H) x 102mm
projection (572mm when opened)
42 Accessory Range
Ref: GRSS600R - 600mm
Stainless Steel Grab Rail
600mm x 32mm diameter satin finish
c/w rose and cover plate fixing detail.
Supplied as single rails.
Ref: GRSS600BT - 600mm
Stainless Steel Grab Rail
600mm x 32mm diameter satin finish
c/w bolt through fixing detail.
Supplied as single rails.
Ref: GRSS300D - 300mm
Stainless Steel D Handle
300mm x 32mm diameter satin finish
c/w bolt through or back to back handle
fixing detail. Supplied as single rails.
Ref: GRSS600DocM
Stainless Steel Grab Rail Set
32mm diameter satin finish c/w rose and
cover plate fixing details.
Ref: GRPC600DocM
Powder Coated Grab Rail Set
32mm diameter powder coated finish c/w
rose and cover plate fixing details.
Available in white or blue.
Ref: GRPC600R - 600mm
Powder Coated Grab Rail
600mm x 32mm diameter powder coated
finish c/w rose and cover plate fixing details.
Available in white or blue
Ref: P-12
Pull Handle
Satin stainless steel straight pull handle.
Single bolt through or back to back fixing
available. 19mm (diameter) x 300mm.
Ref: 98222
Alite Double Toilet Roll Holder
Satin stainless steel double toilet holder.
254mm x 85mm x 10mm dia x 40 mm
(protrusion)
Ref: 98232
Alite Buffered Hat & Coat Hook
Satin stainless steel hat and coat hook.
70mm (Long) x 30mm (Diameter fixing plate)
with 16mm (Diameter barrel/buffer).
Ref: X2876
Stainless Steel Wall Door Stop
16mm x 75mm door stop, 50 x 8mm
concealed rose. Finish SSS,
Screw Fixings supplied. .
Ref: X2875
Stainless Steel Wall Door Stop
16mm x 75mm door stop.
Finish SSS, Screw Fixings supplied..
Ref: X2830
Stainless Steel Floor Door Stop
30mm Diameter with black rubber buffer.
Finish SSS, Screw Fixings supplied.
Ref: X25PRINTED
Stainless Steel Printed Push Plate
Stainless Steel Printed Push Plate
300 x 75mm, Screw fixings supplied.
Finish SSS
Ref: X25
Stainless Steel Push Plate
Stainless Steel Push Plate
300 x 75mm, Screw fixings supplied.
Finish SSS
Ref: T521
Stainless Steel
Hat & Coat Hook, Buffer
44mm projection,
Screw fixings supplied. Finish SSS.
Ref: T510
Stainless Steel Coat Hook, Buffer
44mm projection,
Screw fixings supplied. Finish SSS
Ref: T501
Stainless Steel Coat Hook, Buffer
65mm Cylindrical Coat/Hook Buffer,
Concealed fix. Finish SSS, Wood
Screws supplied.
Ref: B-542
Coat Hook
Coat hook, satin-finish stainless steel.
Flange has 49mm diameter.
19mm diameter x 32mm (H)
x 33mm projection
Cubicle & Washroom Specialist 43
www.excelsior-cubicles.co.uk [email protected]
Excelsior Panelling Systems Limited
Unit 2 Woodside Industrial Estate
Pedmore Road
Dudley, West Midlands
DY2 0RL
Tel: 01384 267770
Fax: 01384 482127
Email: [email protected]
Excelsior Affiliations
from creation to installation... you can rest assuredExcelsior have undertaken the manufacture, supply and installation of bespoke washroom products
in all washroom environments since 1978. We have a wide selection of safe, attractive and reliable
systems to suit all applications, from nursery schools right through to leisure centres and hospitals.
All levels of durability are catered for to meet the end users commercial constraints, combining
innovation with practicality.