Product flyer - Willkommen bei Offboard Diagnostic ... - Flyer (Produktblatt... · ing Win 7 VCI:...
4
Engineering Product flyer
Transcript of Product flyer - Willkommen bei Offboard Diagnostic ... - Flyer (Produktblatt... · ing Win 7 VCI:...
Engineering
Product flyer
En
gin
eeri
ng
The new developer diagnostic application OFFBOARD DIAGNOSTIC
INFORMATION SYSTEM ENGINEERING has been implemented in
order to maintain consistent use of the same tools, from vehicle
development to service. This development tester should be used for
component checks, commissioning and especially functional release.
The SW version to be used should be agreed upon with the person
responsible for the component or project.
Basic diagnostic functions (identification, coding,etc.)
Measurement values (multilink operation, recording measurement values)
Modification (multiple selection in UDS)
Final control diagnosis (including parallel)
Basic settings (including parallel)
hex services
Writing data strings
Reading/writing memory cells
Communication stop
Control unit list (dynamic reloading, hierarchical displays etc.)
Read and delete event memory for entire system
Record the build status and transfer it to VDS
Transmitting the adaptation/coding for individual ECUS and the entire vehicle
Programming updates for entire vehicle
Communication stop Transport mode Role mode
Customer Service OBD with assigned data (Services 01, 04, 09 and 0A)
Engine group
Parallel navigation via result view macros (with Jython v2.5.1)
Scripting (running anti-theft protection GFS and SWAP scripts)
Results report (emitted in xml and html)
Trace function (diagnostic databus recording)
Presets (setting up/accessing measurement/configuration settings)
Support function (reporting problems to Support team)
Equipment level check
Download and comparison of VDS logs Customisation of user interface
Online service interface for automation (multilink-compatible)
Transferring equipment level reports to Carport
Diagnosis via IP
Multilink support on the macro and online interface
Exchange and configuration of diagnostic interfaces
Application and ODX data updates
Software
Control unit
functions
Vehicle functions
General functions
En
gin
eeri
ng
Win 7 VCI:
Win 10 VCI:
CAN:
K-Line:
Ethernet:
VAS 5054*, VAS 5055*, VAS 6154 (*mandatory for functional release) VAS
6154 (mandatory for functional release)
ISO-TP (ISO 15765) / UDS (ISO 14229) / KWP2000 (ISO 14230)
/KWP2000 light via TP 1.6 and TP 2.0 / KWP1281 via TP 1.6 KWP1281 /
KWP2000
Diagnostic over Internet Protocol (DoIP) in accordance with ISO13400-2
Operating system:
Processor:
RAM:
Hard drive capacity:
Windows® 7 (64 Bit) / 10 (64 Bit)
MINIMUM Intel Celeron® or similar
RECOMMENDED Intel Core2Duo® or similar MINIMUM
2 GB
RECOMMENDED 4 GB or larger
MINIMUM 80 GB (depending on quantity of ODX data)
RECOMMENDED 160 GB
The graphic interface can be adjusted according to the Group brand
System requirements
Diagnostic communication
Contact
Support channels are available to the users for questions on licensing, installation and operation:
Licensing tel. +49-5352-900030
Email [email protected]
Technical enquiries: tel. +49-5361-9-16132
Email [email protected]
