Product Detail Set Contents: Ceiling Backer/Dowel Grille ...
Transcript of Product Detail Set Contents: Ceiling Backer/Dowel Grille ...
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-00
Backer Grille 4215BDProduct Detail Set
PD-01: Product Details and Basic InstallationA. Backer/Dowel Grille Section ViewB. Backer/Dowel Grille Back ViewC. Isometric Installation Diagram View
PD-01a: Backer/Blind Blade Dowel Grille Produce DetailsA. Backer/Blind Blade Dowel Grille Section ViewB. Backer/Blind Blade Dowel Grille Back View
PD-10: Typical Suspension System LayoutA. Typical Suspension System Layout Isometric View
PD-11: Typical Installation DetailsA. Perimeter Edge Detail - ParallelB. Perimeter Edge Detail - PerpendicularC. Installation Field Cut Diagram Isometric View
PD-12: Alternate Perimeter OptionsA. Floating Edge Detail - ParallelB. Floating Edge Detail - Perpendicular
See PD-13, PD-14, PD-15: Grille Mounted Perimeter TrimInstallationSee PD-16, PD-17, PD-18 for Suspension System MountedPerimeter Trim
PD-13: Grille Mounted Perimeter Trim Installation(see PD-16, PD-17, PD-18 for Suspension System MountedPerimeter Trim)A. Backer/Dowel Grille Mounted Perimeter Trim Detail - ParallelB. Backer/Dowel Grille Mounted Perimeter Trim Detail -
PerpendicularC. Backer/Dowel Grille Mounted Trim Installation Back View
PD-14: Grille Mounted Perimeter Trim Installation(see PD-16, PD-17, PD-18 for Suspension System MountedPerimeter Trim)A. Backer/Dowel Grille Mounted Perimeter Trim Installation
Isometric Back View
PD-15: Grille Mounted Perimeter Trim Installation(see PD-16, PD-17, PD-18 for Suspension System MountedPerimeter Trim)A. Backer/Dowel Grille Mounted Perimeter Trim Installation
Isometric Face View
PD-16: Suspension System Mounted Perimeter Trim Installation(see PD-13, PD-14, PD-15) for Grille Mounted Perimeter Trim)A. Suspension System Mounted Perimeter Trim Detail - Parallel.B. Suspension System Mounted Perimeter Trim Detail -
Perpendicular.C. Suspension System Mounted Trim Installation Back View
PD-17: Suspension System Mounted Perimeter Trim Installation(see PD-13, PD-14, PD-15 for Grille Mounted Perimeter Trim)A. Suspension System Mounted Perimeter Trim Installation
Isometric Back ViewPD-18: Suspension System Mounted Perimeter Trim Installation(see PD-13, PD-14, PD-15 for Grille Mounted Perimeter Trim)A. Suspension System Mounted Perimeter Trim Installation
Isometric Face View
PD-19: Fixture Integration and Access Panels.A. Enlarged Back View at Maintenance Panel.B. Maintenance Panel Detail - Perpendicular.C. Maintenance Panel Detail - Parallel.D. Linear Light Fixture Detail - Parallel.E. Light Fixture Detail - ParallelF. Sprinkler Detail
PD-20: Horizontal Direct Mount Wall Installation.A. Horizontal Direct Mount Attachment to Wall Furring.B. Horizontal Direct Mount Attachment to Wall Furring Section
PD-21: Vertical Direct Mount Wall Installation.A. Vertical Direct Mount Attachment to Wall Furring.B. Vertical Direct Mount Attachment to Wall Furring Section
PD-22: Horizontal Z-Clip/Z-Bar Wall Installation.A. Horizontal Z-Clip/Z-Bar Mount Attachment to Wall.B. Horizontal Z-Clip/Z-Bar Mount Attachment to Wall Section.
PD-23: Vertical Z-Clip/Z-Bar Wall Installation.A. Vertical Z-Clip/Z-Bar Mount Attachment to Wall.B. Vertical Z-Clip/Z-Bar Mount Attachment to Wall Section
PD-24: CISCA Tolerances, Product Notes, and Ordering Notes
Product Detail Set Contents:Product SpecificationsCeiling Backer/Dowel Grille
Backer: 1/2" x 1 1/4" x 12" - Black
Nominal Size 12" x 96"
FirePerformance:
ASTM E84 (Class A) & CAN/ULC-S102: FS 200or less, SD 450 or less; Fire-Retardant CoatingAvailable (E84 Class A): FS 25 or less, SD 450or less
Finish: Clear Top coat, 20% sheen
Core: 5/8" Solid Wood
Module:Type: Backer/Dowel Grille Module (Ceiling)
Board Specs.:
Species: Solid Wood Species
5/8" x 2-1/4", 6 Boards/Module
Screw through backer to 15/16" CertainTeedT-Bar (Optional C-124 Backer Clip)
Mounting:
Accessories: Felt, Nonwoven, Screen, or Thermoplastic
Backing (Optional)
Dowel: Solid Wood Dowel Ø1/2" x 12" - Black
1058" O/S-O/S
Cross Tee2'-0"O.C.
Cross Tee2'-0"O.C.
Cross Tee2'-0"O.C.
Cross Tee1'-0"O.C.
512" Max.
Cantilever
7'-11"OVERALL
14" 1'-0" O/S-O/S
158"
MainRunner
4'-0"O.C.
512" Max.
Cantilever
APD-01
1/2" Backer
114"
Ø12"
1/2" WoodDowel
Solid WoodFinished Face,
& Sealed Ends.
APD-01
1/2" Backer - Black1'-0"1
4"21 4" B
oard23
4"
1'-0"Nominal
2" O.C.
138" Reveal 5
8"
Solid Wood FinishedFace & Sealed Ends.
Starting Edgeof Next Blade
1/2" WoodDowel - Black
Starting Edgeof Next Blade
1516"
[MAX]Ø1
2"
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
MODULE QTY.:
--
Quantity does not reflect closetstock or spares
Product Specifications
Screw through backer to 15/16" CertainTeed T-Bar(Optional Backer Clips (C-124))
Backer: 1/2" x 1 1/4" x 12" - Black
Nominal Size 12" x 95"
Finish: Clear Top coat, 20% sheen
Mounting:
Core: 5/8" Solid Wood
Accessories: Felt, Nonwoven, Screen, or Thermoplastic
Backing (Optional)
Module:Type:
Board Specs.:
Species: Solid Wood Species
5/8" x 2-1/4", 6 Boards/Module
APD-01
4215BD Backer/Dowel Grille Section ViewScale: 3"=1'-0"
BPD-01
4215BD Backer/Dowel Grille Back ViewScale: 3/4"=1'-0"
CPD-01
4215BD Isometric Installation Diagram ViewScale: 1/2"=1'-0"
Minimum 1/2" Reveal to Allowfor Expansion/Contraction
CertainTeed 15/16"HD Cross Tee
Grille BackerModule
1" Reveal BetweenGrille Module
CertainTeed 15/16" HDMain Runner 48" O.C.
Flat backers
5-1/2" Max.Cantilever
CertainTeed 15/16"Heavy Duty MainRunners (48" O.C.)
Optional BackerClips (C-124)
#6 1-1/4" Hi Lo BugleHead ScrewsFasteners 12" to 24"o.c. by Others
Ceiling Backer/Dowel Grille
Product Details and BasicInstallation
4215BD Backer/Dowel Grille
Ceiling Backer/Dowel Grille
Backer/Dowel Grille Module (Ceiling)
Dowel: Solid Wood Dowel Ø1/2" x 12" - Black
Grille Backer/DowelModule Ready toInstall
Solid Wood Dowel
Optional Acoustical Infill Panel
Fire Performance: ASTM E84 (Class A) & CAN/ULC-S102: FS 200 orless, SD 450 or less; Fire-Retardant CoatingAvailable (E84 Class A): FS 25 or less, SD 450 or less
Felt, Nonwoven, Screen,
or Thermoplastic
Backing (Optional)
PD-01
1058" O/S-O/S
Cross Tee2'-0"O.C.
Cross Tee2'-0"O.C.
Cross Tee2'-0"O.C.
Cross Tee1'-0"O.C.
512" Max.
Cantilever
7'-11"OVERALL
14" 1'-0" O/S-O/S
158"
MainRunner
4'-0"O.C.
512" Max.
Cantilever
APD-01A
1/2" Backer
114"
Ø12"
1/2" WoodDowel
Solid WoodFinished Face,
& Sealed Ends.
Blind Blade
APD-01A
1/2" Backer - Black1'-0"1
4"21 4" B
oard23
4"
1'-0"Nominal
2" O.C.
138" Reveal 5
8"
Solid Wood FinishedFace & Sealed Ends.
Starting Edgeof Next Blade
1/2" WoodDowel - Black
Starting Edgeof Next Blade
1516"
[MAX]Ø1
2"
Blind Blade
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
APD-01A
4215BD Backer/Blind Blade Dowel Grille Section ViewScale: 3"=1'-0"
BPD-01A
4215BD Backer/Blind Blade Dowel Grille Back ViewScale: 3/4"=1'-0"
Backer/Blind Blade DowelGrille Produce Details
4215BD Backer/Dowel Grille
Ceiling Backer/Dowel Grille
PD-01A
12' CertainTeed 15/16"HD Main Runner(EZCS12-12-20) 48" O.C.
4' CertainTeed 15/16"HD Cross Tee(EZCS4-12-20)
HangerWires(HW12)
2' CertainTeed15/16" HD Cross Tee
(EZCS2-12-20)
2' CertainTeed15/16" HD Cross Tee(EZCS2-12-20)
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-10
APD-10
4215BD Typical Suspension System Layout Isometric ViewScale: 1/2"=1'-0"
Typical Suspension SystemLayout
Solid Wood FinishedFace & Sealed Ends.
1/2" Backer
138" Reveal
CertainTeed HD MainRunner 48" O.C.
CertainTeed WallAngle (WA-14-14)
Reveal to match panelReveal (Additional perimeter
options, see PD-12)
#6 1-1/4" Hi Lo BugleHead ScrewsFasteners 12" to 24"o.c. by Others
CertainTeed 15/16"HD Cross Tee
Optional Backer Clip (C-124)
Optional BackerClip (C-124)
Grille Ready to Install1/2" Wood Dowel
Solid WoodFinished Face& Sealed Ends.
1/2" Backer
CertainTeed 15/16" HDCross Tee
CertainTeed WallAngle (WA-14-14)
Reveal to match panelReveal (Additional perimeter
options, see PD-12)
CertainTeed HD MainRunner 48" O.C.
FieldModificationBacker, Appliedin the Field Priorto Cutting Planks
Field Trim PanelEnd by Others
1/2" Wood Dowel
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-11
APD-11
4215BD Perimeter Edge Detail - ParallelScale: 3"=1'-0"
CPD-11
4215BD Installation Field Cut Diagram Isometric ViewScale: 1/2"=1'-0"
BPD-11
4215BD Perimeter Edge Detail - PerpendicularScale: 3"=1'-0"
Grid Guidelines:
Install panels by attaching with fasteners directly through flat backers intoCertainTeed Heavy Duty Main Runners and parallel Cross Tees every 24" O.C., or useoptional Backer Clip (C-124).
Maximum cantilever from plank end to last Main Tee is 6". Note that additional MainRunners or Cross Tees may be needed in certain configurations.
Cross Tee Required 24" O.C. between Main Runners.
Field modified panels must attach to a minimum of (2) Main Runners - or usealternative attachment method. Loose backers provided for field modified panels.
Typical Installation Details
CertainTeed 15/16"HD Cross Tee
Attach Small Plank Pieces with1/2" Black Backer to Back of
Adjacent Panel. by Others
Seal Cut Edgeswith Factory
ProvidedSealant
Field ModificationBackers Applied as
Needed
CertainTeed 15/16"Heavy Duty MainRunners (48" O.C.)
Seal Cut Edgeswith FactoryProvided Sealant
Field Modification Backer, Appliedin the Field Prior to Cutting Planks
1/2" Backer
CertainTeed 15/16" HDMain Runner 48" O.C.
CertainTeed 15/16" HDCross Tee
Hanger Wires (HW12)
1/2" Wood Dowel
1/2" Backer
CertainTeed 15/16"HD Cross Tee
CertainTeed 15/16" HDMain Runner 48" O.C.
Hanger Wires (HW12)
1/2" Wood Dowel
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-12
Alternate PerimeterOptions
BPD-12
4215BD Floating Edge Detail - PerpendicularScale: 3"=1'-0"
APD-12
4215BD Floating Edge Detail - ParallelScale: 3"=1'-0"
Solid Wood FinishedFace & Sealed Ends.
58"
6" T
rim
90° PerimeterTrim Bracket(C-116)
Reveal to matchpanel Reveal
1/2" Backer
CertainTeed 15/16" HDMain Runner 48" O.C.
CertainTeed 15/16" HDCross Tee
1/2" Wood Dowel
Solid Wood FinishedFace & Sealed Ends.
CertainTeed 15/16"HD Cross Tee
CertainTeed 15/16" HDMain Runner 48" O.C.
58"
6" T
rim
90° PerimeterTrim Bracket(C-116)
Reveal to matchpanel Reveal 1/2" Wood Dowel
1/2" Backer
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-13
APD-13
4215BD Backer/Dowel Grille Mounted Perimeter Trim Detail - ParallelScale: 3"=1'-0"
BPD-13
4215BD Backer/Dowel Grille Mounted Perimeter Trim Detail - PerpendicularScale: 3"=1'-0"
CPD-13
4215BD Backer/Dowel Grille Mounted Trim Installation Back ViewScale: 1/2"=1'-0"
Grille Mounted Perimeter TrimInstallation (see PD-16, PD-17,PD-18 for Suspension SystemMounted Perimeter Trim)
CertainTeed 15/16"HD Cross Tee
3" SplicePlate C-100
CertainTeed 15/16"Heavy Duty MainRunners (48" O.C.)
4" Trim
90° Perimeter TrimBracket (C-116)
1" Min Reveal
Suggested ComponentCertainTeed SmartFit Yoke (SFYK)D
PD-19A
PD-13
BPD-13
Light Fixtureby Others
Field Cut 1/2" Min. LinearPanel & Access Panel
Reveal Between & LightFixture
EPD-19
Field Modification Backers FieldApplied as Needed and Before
Cutting Panels
Maintenance Panel
APD-19
Grille Backer/Dowel Panel
Field Cut 1/2" Min. RevealBetween Field Cut 1/2" Min.Panel & Maintenance Panel
Optional BackerClips (C-124)
Splice Plate C-101
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-14
APD-14
4215BD Backer/Dowel Grille Mounted Isometric Trim Installation Back ViewScale: 3/4"=1'-0"
Grille Mounted Perimeter TrimInstallation (see PD-16, PD-17,PD-18 for Suspension SystemMounted Perimeter Trim)
CertainTeed 15/16"HD Cross Tee
3" SplicePlate C-100
CertainTeed 15/16"Heavy Duty MainRunners (48" O.C.)
1" Min Reveal
Field Modification Backers FieldApplied as Needed and Before
Cutting Panels
Grille Backer/Dowel Panel
Field Cut 1/2" Min. RevealBetween Field Cut 1/2" Min.Panel & Maintenance Panel
3" SplicePlate C-100
4" TrimField Installed
Optional BackerClips (C-124)
90° Perimeter TrimBracket (C-116)
Field Installed
Maintenance Panel
Suggested ComponentCertainTeed SmartFit Yoke
(SFYK)
Light Fixtureby Others
1/2" Min Reveal BetweenPanels & Trim.
Light Fixture by Others
Field Cut 1/2" Min. Panel & RevealBetween Panel & Light Fixture
Field Modification Backers FieldApplied as Needed and Before
Cutting Panels
Hanger Wires 48" O.C.; Hanger Wires < 6"from Perimeter Trim Attachments
Note: All fixtures such as sprinklers, lights,cameras, speakers etc. must be suspended
independently of the wood ceiling.
Splice Plate C-101
1/2" Wood Dowel
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-15
APD-15
4215BD Backer/Dowel Grille Mounted Isometric Trim Installation Face ViewScale: 3/4"=1'-0"
Grille Mounted Perimeter TrimInstallation (see PD-16, PD-17,PD-18 for Suspension SystemMounted Perimeter Trim)
CertainTeed 15/16" HD MainRunners 48" O.C. with CrossTees 24" from Main Runners withCross Tees 12" O.C. as Needed
1" Min Reveal
Field Cut 1/2" Min. RevealBetween Field Cut 1/2" Min.Panel & Maintenance Panel
4" TrimField Installed
Maintenance Panel
Light Fixtureby Others
1/2" Min Reveal BetweenPanels & Trim.
Grille Backer/Dowel Panel
Light Fixtureby Others
Backer/Dowel
CertainTeed 15/16" HDMain Runner 48" O.C.
CertainTeed 15/16" HDCross Tee
Perimeter Clip(CTSPC-2)
CertainTeed WallAngle (WA-14-14)
Solid Wood FinishedFace & Sealed Ends.
58"
6" T
rim
Reveal to matchpanel Reveal
1/2" Backer
1/2" Wood Dowel
Solid Wood FinishedFace & Sealed Ends.
58"
6" T
rim
Reveal to matchpanel Reveal
CertainTeed 15/16" HDMain Runner 48" O.C.
CertainTeed 15/16" HDCross Tee
Perimeter Clip(CTSPC-2)
CertainTeed WallAngle (WA-14-14)
1/2" Wood Dowel
1/2" Backer
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-16
CertainTeed 15/16"HD Cross Tee
3" SplicePlate C-100
CertainTeed 15/16"Heavy Duty MainRunners (48" O.C.)
4" Trim1" Min Reveal
Suggested ComponentCertainTeed SmartFit Yoke (SFYK)
DPD-19
APD-16
BPD-16
Light Fixtureby Others
Field Cut 1/2" Min. LinearPanel & Access Panel
Reveal Between & LightFixture
EPD-19
Field Modification Backers FieldApplied as Needed and Before
Cutting Panels
Maintenance Panel
APD-19
Grille Backer/Dowel Panel
Field Cut 1/2" Min. RevealBetween Field Cut 1/2" Min.Panel & Maintenance Panel
CPD-16
4215BD Suspension System Mounted Perimeter Trim Installation Back ViewScale: 1/2"=1'-0"
APD-16
4215BD Suspension System Mounted Perimeter Trim Detail - ParallelScale: 3"=1'-0"
BPD-16
4215BD Suspension System Perimeter Trim Detail - PerpendicularScale: 3"=1'-0"
Optional Trim Attachment Optional Trim Attachment
Optional Trim Attachment
Perimeter Clip(CTSPC-2)
CertainTeed WallAngle (WA-15-15)
Suspension System MountedPerimeter Trim Installation(see PD-13, PD-14, PD-15) forGrille Mounted Perimeter Trim)
Optional BackerClips (C-124)
Splice Plate C-101
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-17
APD-17
4215BD Suspension System Mounted Perimeter Trim Installation Isometric Back ViewScale: 3/4"=1'-0"
CertainTeed 15/16"HD Cross Tee
3" SplicePlate C-100
CertainTeed 15/16"Heavy Duty MainRunners (48" O.C.)
1" Min Reveal
Field Modification Backers FieldApplied as Needed and Before
Cutting Panels
Grille Backer/Dowel Panel
Field Cut 1/2" Min. RevealBetween Field Cut 1/2" Min.Panel & Maintenance Panel
3" SplicePlate C-100
4" TrimField Installed
Optional BackerClips (C-124)
Perimeter Clip(CTSPC-2)
Maintenance Panel
Suggested ComponentCertainTeed SmartFit Yoke
(SFYK)
Light Fixtureby Others
1/2" Min Reveal BetweenPanels & Trim.
Light Fixture by Others
Field Cut 1/2" Min. Panel & RevealBetween Panel & Light Fixture
Field Modification Backers FieldApplied as Needed and Before
Cutting Panels
Suspension System MountedPerimeter Trim Installation(see PD-13, PD-14, PD-15) forGrille Mounted Perimeter Trim)
Hanger Wires 48" O.C.; Hanger Wires < 6"from Perimeter Trim Attachments
Optional Trim Attachment
Note: All fixtures such as sprinklers, lights,cameras, speakers etc. must be suspended
independently of the wood ceiling.
Splice Plate C-101
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-18
APD-18
4215BD Suspension System Mounted Perimeter Trim Installation Face ViewScale: 3/4"=1'-0"
CertainTeed 15/16" HD MainRunners 48" O.C. with CrossTees 24" from Main Runners withCross Tees 12" O.C. as Needed
1" Min Reveal
Field Cut 1/2" Min. RevealBetween Field Cut 1/2" Min.Panel & Maintenance Panel
4" TrimField Installed
Maintenance Panel
Light Fixtureby Others
1/2" Min Reveal BetweenPanels & Trim.
Grille Backer/Dowel Panel
Light Fixtureby Others
Optional Trim Attachment
Suspension System MountedPerimeter Trim Installation(see PD-13, PD-14, PD-15) forGrille Mounted Perimeter Trim)
BPD-19
CPD-19
Field ModificationBackers Field
Applied as Neededand Before Cutting
Panels
Maintenance Panel
Field Cut 1/2" Min.Reveal BetweenLinear Panel &Access Panel
Solid Wood FinishedFace & Sealed Ends.
1/2" Backer CertainTeed 15/16" HDCross Tee (Beyond)
CertainTeedHD MainRunner 48" O.C.
Field Modification Backer, appliedin the field prior to cutting planks
Field Trim PanelEnds as needed
Field Trim PanelEnds as needed
Reveal tomatch panel
Reveal
Seal Cut Edgeswith Factory
Provided Sealant
Seal Cut Edgeswith Factory
Provided Sealant
Reveal tomatch panel
Reveal
1/2" Wood Dowel
Solid Wood FinishedFace & Sealed Ends.
1/2" Backer(Beyond)
CertainTeed 15/16"HD Cross Tee
CertainTeed HD MainRunner 48" O.C. (Beyond)
Field Modification Backer, Appliedin the Field Prior to Cutting Planks
Standard Grille
Field ModifiedMaintenance Panel
1/2" Wood DowelStained Black (Beyond)
SuggestedComponentCertainTeedSmartFit Yoke
(SFYK)CertainTeed 15/16"HD Cross Tee
CertainTeedHD Main
Runner 48"O.C.
Light Fixtureby Others
Solid Wood FinishedFace & Sealed Ends.
1/2" Backer
Field ModifiedGrille Panel
CertainTeed HD MainRunner 48" O.C. (Beyond)
Solid Wood FinishedFace & Sealed Ends.
Field Cut 1/2" Min.Reveal Between LinearPanel & Light Fixture
Field Modification Backers(Beyond)FieldApplied as Needed and Before Cutting Panels
Light Fixtureby Others
CertainTeed 15/16" HDSuspension System
Fire Sprinkler by Others
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-19
APD-19
4215BD Enlarged Back View at Maintenance PanelScale: 1-1/2"=1'-0"
Fixture Integration andAccess Panels
BPD-19
4215BD Maintenance Panel Detail - PerpendicularScale: 3"=1'-0"
CPD-19
4215BD Maintenance Panel Detail - ParallelScale: 3"=1'-0"
DPD-19
4215BD Linear Light Fixture Detail - ParallelScale: 3"=1'-0"
EPD-19
4215BD Light Fixture Detail - ParallelScale: 3"=1'-0"
FPD-19
Sprinkler DetailScale: 3"=1'-0"
Note: All fixtures such as
sprinklers, lights, cameras,
speakers etc. must be
suspended independently
of the wood ceiling.
Solid Wood FinishedFace & Sealed Ends.
1/2" Backer
Fasteners by Others
Grille Backer/DowelModule Ready toInstall
Fasteners 12" to 24"O.C. by Others
Furring by Installer
Structural Wall by Others
234"
1/2" Wood Dowel
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215B6 Backer/Dowel Grille
PD-20
APD-20
4215B6 Horizontal Direct Mount Attachment to Wall FurringScale: 1/2"=1'-0"
Horizontal Direct MountWall Installation
BPD-20
4215B6 Horizontal Direct Mount Attachment to Wall Furring SectionScale: 3"=1'-0"
Note: Wall Mounted Panels aremade with 1-1/4" Wide Backers
Wall Furring to Alignwith Panel Backers
Fasteners12" to 24" O.C.by Others
Grille Backer/DowelModule Ready to
Install
Fasteners byOthers
Grille Backer/DowelModule Ready to Install
Furring by Installer
Structural Wallby Others
Fasteners 12" to 24" O.C. by Others
Solid Wood FinishedFace & Sealed Ends.
1/2" Backer
Grille PanelReady to Install
234"
1/2" Wood Dowel
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215B6 Backer/Dowel Grille
PD-21
APD-21
4215B6 Vertical Direct Mount Attachment to Wall FurringScale: 1/2"=1'-0"
Vertical Direct Mount WallInstallation
BPD-21
4215B6 Vertical Direct Mount Attachment to Wall Furring SectionScale: 3"=1'-0"
Note: Wall Mounted Panels aremade with 1-1/4" Wide Backers
Wall Furring to Alignwith Panel Backers
Fasteners12" to 24" O.C.by Others
Grille Backer/DowelModule Ready to
Install
Furring by Installer
Structural Wallby Others
234"
Z-Clip
Z-Bar
Solid Wood FinishedFace & Sealed Ends.
1/2" Backer
Grille Backer/DowelModule Ready toInstall
1/2" Wood Dowel
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215B7 Backer/Dowel Grille
PD-22
Note: Z-Clip Wall Mounting Panelsare made with 2-1/2" Wide Backers
Z-Clip/Z-BarAttachmentby Others
Grille Backer/DowelModule Ready toInstall
APD-22
4215B7 Horizontal Z-Clip/Z-Bar Mount Attachment to WallScale: 1/2"=1'-0"
Horizontal Z-Clip/Z-BarWall Installation
BPD-22
4215B7 Horizontal Z-Clip/Z-Bar Mount Attachment to Wall SectionScale: 3"=1'-0"
Z-Clips byInstaller
Solid Wood FinishedFace & Sealed Ends.
1/2" Backer
Grille Backer/DowelModule Ready to Install
234"
Furring by Installer
Structural Wallby Others
Z-Clips & Z-Barby Installer
1/2" Wood Dowel
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215B7 Backer/Dowel Grille
PD-23
APD-23
4215B7 Vertical Direct Mount Attachment to Wall FurringScale: 1/2"=1'-0"
Vertical Direct Mount WallInstallation
BPD-23
4215B7 Vertical Direct Mount Attachment to Wall Furring SectionScale: 3"=1'-0"
Grille Backer/DowelModule Ready to
Install
Note: Z-Clip Wall Mounting Panelsare made with 2-1/2" Wide Backers
Z-Clip/Z-BarAttachmentby Others
REPRESENTATIVE
CUSTOMER
SHEET TITLE
SHEET NO.
PROJECT TITLE
PRODUCT
DRWNDATE CHECK
PROJECT LOCATION
SHEET REFERENCE
06/28/21 A.D. D.T.
ARCHITECT
Only the products that are identified assuch on this document are FSC® certified
Cer
tain
Teed
Cei
ling
Cor
pora
tion
20 M
oore
s Roa
dM
alve
rn, P
A 1
9355
800-
233-
8990
Certificate Code:
SCS-COC-006960
R
FSC
The mark ofresponsible forestry
FSC C151918R
DA
TERE
VIS
ION
S#
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for an architectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicable for a specific installation. CertainTeed assumes no liability forthe accuracy or completeness of the drawings for a specific installation or the fitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assure compliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
THIS DRAWING IS THE SOLE PROPERTY OF CERTAINTEED AND CONTAINS CONFIDENTIAL INFORMATION AND IS TO BE USED ONLY UNDER THE EXPRESS AUTHORITY GIVEN, IN WRITING, BY CERTAINTEED. ANY USE, REPRODUCTION, DISTRIBUTION IN WHOLE OR IN PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF CERTAINTEED IS PROHIBITED.
Ceiling Backer/Dowel Grille
4215BD Backer/Dowel Grille
PD-24
CISCA Tolerances,Product Notes, andOrdering Notes
Installation Notes:
• Wood is a natural material with varying grain and colorcharacteristics, making each installation uniquely beautiful.Characteristics may vary from panel to panel. If desired, for greatervisual consistency, the products should be laid out and arranged inadvance of installation to achieve the desired effect. All productsshould be reviewed before installation to avoid undesirable visualpattern because of natural color and grain variations.
• Wood panels must be acclimatized for 72 hours prior to installation.Maintain relative humidity between 25%and 55% and temperaturebetween 50°F and 86°F (10°C and 30°C) for the life of the product,unless otherwise noted in order, quote, and submittal documents.
• Fixtures and MEP devices to be hung independently from ceilingsupport system. Fixtures and MEP devices may include but are notlimited to: light fixtures, HVAC diffusers, sprinkler heads and/or piping,speakers, security cameras, components, décor, etc.
• Reflected ceiling drawings will include penetrations of limited lightfixtures and HVAC registers only when the size of the wood is impacted.Other penetrations, including but not limited to sprinklers, securitycameras audio-visual, etc., Are typically not included in the drawing setas placement and code requirements vary by product and jurisdiction.5. Fixtures and MEP devices shown are for reference only; unlessotherwise noted all fixtures and MEP devices by others.
• Contractor to follow CISCA guidelines for suspension systeminstallation. Wood ceilings are typically heavier than other ceilingproducts. Follow manufacturer load requirements and installationspecifications based on the weights and dimensions of product beinginstalled.• All field cut products must be sealed with a clear sealer or stainedthen sealed.• See Product Detail Sets for edge condition details.
Suspension System Components and Accessories:
• CertainTeed 15/16" & 9/16"HD acoustical suspension systems soldseparately. Visit www.certainteed.com/suspension-systems/ for moreinformation and purchasing options.
Ordering Notes:
• All dimensions are shown for reference and willhave to be modified for field installation.
• Dimensions are to be field verified prior tofabrication. Changes in dimensions may result inquantity adjustments.
• Closet stock and spares are not included andmust be added to quantity shown if needed.
• Utilize the use of cut-offs where appropriate -product quantities based on partial productsbeing used.
Ordering Notes:All dimensions are shown for reference and willhave to be modified for field installation.Dimensions are to be field verified prior tofabrication. Changes in dimensions may resultin quantity adjustments. Closet stock andspares are not included and must be added toquantity shown if needed. Utilize the use ofcut-offs where appropriate - product quantitiesbased on partial products being used.
Suspension System Components and Accessories:CertainTeed 15/16" & 9/16"HD acousticalsuspension systems sold separately. Visitwww.certainteed.com/suspension-systems/ formore information and purchasing options.
Seismic Notes:For installations in seismic design categories D, E, or F the maximumsystem weight for acoustical suspension systems is 2.5 lbs. per squarefoot. ICC-ES ESRs, like CertainTeed Architectural ICC-ES ESR-3336, areavailable covering installations in seismic design categories D, E, & F anddefine installations including seismic installations for system weights up to4.0 lbs. per square foot. These are the maximum allowable weightsregardless of hanger wire placement without special engineeringapproved by local code jurisdiction officials. Seismic design category Cinstallations > 2.5 lbs. per square foot must follow installation requirementsfor seismic design categories D, E, & F. CertainTeed does not supplyacoustical suspension system details or layouts for systems exceeding 4.0lbs. per square foot.
Linear Wood - Rectangular boards oriented horizontally.
Board Length: ± 1/16” (0.062") Blade Width: ± 1/16” (0.062")
Board Thickness ± 1/32" (0.031")
Linear Reveal Width (D) ≤ 1/16" (0.062")
Bowing (Upward)(F) ≤ 1/32" per LF
Crook (Deviation)(A) ≤ 1/32" per LF
Cupping ≤ 1/32" (0.031") per LF
Board end squareness ± 0.5°
(D)=Factory Assembled Panels (F)= Per 6" high blade (A)=Supported on 24" centers