Product Description - Cornerstone OnDemand · Product Description Issue 02 Date 2011-03-28 Symantec...

NetBackup 5200

Release 1.2

Product Description

Issue 02

Date 2011-03-28

Symantec Corporation

Symantec provides customers with comprehensive technical support and service. For any assistance, pleasecontact our local office or company headquarters.

Symantec CorporationAddress: 350 Ellis St, Mountain View CA 94043

Website: http://www.symantec.com

Copyright © Symantec Corporation. 2010-2011. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Symantec Corporation. Trademarks and Permissions

and other Symantec trademarks are trademarks of Symantec Corporation.All other trademarks and trade names mentioned in this document are the property of their respective holders. NoticeThe purchased products, services and features are stipulated by the contract made between Symantec andthe customer. All or part of the products, services and features described in this document may not be withinthe purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representationsof any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute the warranty of any kind, express or implied.

Symantec Corporation

http://www.symantec.com

Contents

About This Document.....................................................................................................................1

1 Product Introduction.................................................................................................................1-11.1 Product Appearance........................................................................................................................................1-21.2 Product Configuration.....................................................................................................................................1-21.3 Hardware Structure.........................................................................................................................................1-31.4 Panel................................................................................................................................................................1-6

1.4.1 Front Panel.............................................................................................................................................1-71.4.2 Rear Panel..............................................................................................................................................1-8

1.5 Features.........................................................................................................................................................1-151.6 Technical Specifications...............................................................................................................................1-161.7 Environmental Requirements........................................................................................................................1-171.8 Standards Compliant and Certificates...........................................................................................................1-18

2 Product Components.................................................................................................................2-12.1 Chassis.............................................................................................................................................................2-22.2 Disk Module....................................................................................................................................................2-22.3 Power Module.................................................................................................................................................2-42.4 Backplane........................................................................................................................................................2-52.5 Fan Module.....................................................................................................................................................2-72.6 Mainboard.......................................................................................................................................................2-92.7 RAID Card....................................................................................................................................................2-112.8 10GE NIC......................................................................................................................................................2-112.9 GE NIC (Configuration Mode 1).................................................................................................................2-132.10 8Gb FC HBA...............................................................................................................................................2-14

3 Device Cable...............................................................................................................................3-13.1 Power Cable and Grounding Cable.................................................................................................................3-2

3.1.1 Power Cable...........................................................................................................................................3-23.1.2 Grounding Cable....................................................................................................................................3-4

3.2 Signal Cable....................................................................................................................................................3-53.2.1 Network Cable........................................................................................................................................3-53.2.2 Multi-Mode Fiber...................................................................................................................................3-63.2.3 Serial Cable............................................................................................................................................3-7

NetBackup 5200Product Description Contents

Issue 02 (2011-03-28) Symantec Corporation i

A Abbreviations and Acronyms................................................................................................A-1

ContentsNetBackup 5200

Product Description

ii Symantec Corporation Issue 02 (2011-03-28)

Figures

Figure 1-1 NetBackup 5200 appearance.............................................................................................................1-2Figure 1-2 Overall hardware structure of the NetBackup 5200...........................................................................1-5Figure 1-3 PCI-E slots on the mainboard (Configuration mode 1)......................................................................1-6Figure 1-4 PCI-E slots on the mainboard (Configuration mode 2)......................................................................1-6Figure 1-5 Front view of the NetBackup 5200.....................................................................................................1-7Figure 1-6 Disk slots of the NetBackup 5200......................................................................................................1-8Figure 1-7 Rear view of the NetBackup 5200......................................................................................................1-9Figure 1-8 Ports of the NetBackup 5200 ...........................................................................................................1-10Figure 1-9 Rear view of the NetBackup 5200....................................................................................................1-13Figure 1-10 Ports of the NetBackup 5200..........................................................................................................1-14Figure 2-1 Appearance of the chassis...................................................................................................................2-2Figure 2-2 Disk module........................................................................................................................................2-3Figure 2-3 AC power module...............................................................................................................................2-4Figure 2-4 Front view...........................................................................................................................................2-6Figure 2-5 Rear view............................................................................................................................................2-6Figure 2-6 Fan module.........................................................................................................................................2-7Figure 2-7 Location of the fan module and fan indicators...................................................................................2-8Figure 2-8 Appearance of the mainboard...........................................................................................................2-10Figure 2-9 Appearance of the RAID card..........................................................................................................2-11Figure 2-10 10GE NIC.......................................................................................................................................2-12Figure 2-11 4-port GE NIC...............................................................................................................................2-13Figure 2-12 8Gb FC HBA..................................................................................................................................2-15Figure 3-1 Structure of the AC power cable........................................................................................................3-3Figure 3-2 Structure of the grounding cable.........................................................................................................3-4Figure 3-3 Structure of the network cable............................................................................................................3-5Figure 3-4 Structure of the multi-mode fiber.......................................................................................................3-7Figure 3-5 Structure of the serial cable................................................................................................................3-7

NetBackup 5200Product Description Figures

Issue 02 (2011-03-28) Symantec Corporation iii

Tables

Table 1-1 Product configuration of the NetBackup 5200.....................................................................................1-2Table 1-2 The parts of the NetBackup 5200.........................................................................................................1-4Table 1-3 Description of the indicators of the NetBackup 5200..........................................................................1-7Table 1-4 Description of the ports of the rear view............................................................................................1-10Table 1-5 Description of the indicators of the NetBackup 5200........................................................................1-11Table 1-6 Description of indicators on the 10GE NIC.......................................................................................1-12Table 1-7 Description of indicators on the 4-port GE NIC................................................................................1-12Table 1-8 Description of indicators on the 8Gb FC HBA..................................................................................1-12Table 1-9 Description of the ports on the NetBackup 5200...............................................................................1-14Table 1-10 Features of the NetBackup 5200......................................................................................................1-15Table 1-11 Technical specifications of the NetBackup 5200.............................................................................1-17Table 1-12 Environmental requirements of the NetBackup 5200 .....................................................................1-17Table 1-13 Protocols and standards that the NetBackup 5200 complies with...................................................1-18Table 1-14 Safety standards and EMC standards...............................................................................................1-18Table 1-15 Industry standards............................................................................................................................1-19Table 1-16 Certificates.......................................................................................................................................1-20Table 2-1 Technical specifications.......................................................................................................................2-5Table 2-2 Port description....................................................................................................................................2-7Table 2-3 Technical specifications of the fan module..........................................................................................2-8Table 2-4 Description of indicators on the 10GE NIC.......................................................................................2-12Table 2-5 Description of ports on 10GE NIC.....................................................................................................2-12Table 2-6 Technical specifications of the 10GE NIC.........................................................................................2-13Table 2-7 Description of indicators on the 4-port GE NIC................................................................................2-14Table 2-8 Description of ports on 4-port GE NIC..............................................................................................2-14Table 2-9 Technical specifications of the 4-port GE NIC..................................................................................2-14Table 2-10 Description of indicators on the 8Gb FC HBA................................................................................2-15Table 2-11 Description of ports on 8Gb FC HBA..............................................................................................2-16Table 2-12 Technical specifications of the 8Gb FC HBA..................................................................................2-16Table 3-1 Cable connection list of the power cable.............................................................................................3-3Table 3-2 Technical specifications of the power cable........................................................................................3-4Table 3-3 Technical specifications of the grounding cable..................................................................................3-4Table 3-4 Cable connection list of the network cable..........................................................................................3-6Table 3-5 Technical specifications of the network cable.....................................................................................3-6

NetBackup 5200Product Description Tables

Issue 02 (2011-03-28) Symantec Corporation v

Table 3-6 Technical specifications of the multi-mode fiber.................................................................................3-7Table 3-7 Cable connection list of the serial cable...............................................................................................3-8Table 3-8 Technical specifications of the serial cable..........................................................................................3-8

TablesNetBackup 5200

Product Description

vi Symantec Corporation Issue 02 (2011-03-28)

About This Document

Product VersionThe following table lists the product version related to this document.

Product Name Product Version

NetBackup 5200 Release 1.2

Intended AudienceThis documents describes the hardware compositions, features and functions of each hardwaremodule, appearance and technical indexes, and cable layout and technical indexes of theNetBackup 5200.

This document is intended for the following audience:

l Network planning engineers

l Hardware installation engineers

l Installation debugging engineers

l Field maintenance engineers

l System maintenance engineers

Symbol ConventionsThe symbols that may be found in this document are defined as follows.

Symbol Description

DANGERIndicates a hazard with a high level of risk, which if notavoided, may result in death or serious injury.

WARNINGIndicates a hazard with a medium or low level of risk, whichif not avoided, could result in minor or moderate injury.

NetBackup 5200Product Description About This Document

Issue 02 (2011-03-28) Symantec Corporation 1

Symbol Description

CAUTIONIndicates a potentially hazardous situation, which if notavoided, could result in equipment damage, data loss,performance degradation, or unexpected results.

TIP Indicates a tip that may help you solve a problem or savetime.

NOTE Provides additional information to emphasize or supplementimportant points of the main text.

Update HistoryUpdates between document revisions are cumulative. Therefore, The latest version of thisdocument contains all of the updates that were made in previous versions.

Updates in Issue 02 (2011-03-28)The second commercial release. The updated contents are as follows.

Modify slot configurations. Add 8Gb FC HBA and 4-port GE NIC. For details,see "1.1 ProductAppearance".

Updates in Issue 01 (2010-08-30)Initial commercial release.

About This DocumentNetBackup 5200

Product Description

2 Symantec Corporation Issue 02 (2011-03-28)

1 Product Introduction

About This Chapter

The NetBackup 5200 is an integrated backup device with high-density and high-performance.It consists of the backup device, backup software, and backup media. The NetBackup 5200fulfills the unified management of the software and hardware, which reduces operations andmaintenance cost, and minimizes the total cost of ownership (TCO).

1.1 Product AppearanceThis section describes the appearance of the NetBackup 5200.

1.2 Product ConfigurationThis section describes the hardware configuration of the NetBackup 5200.

1.3 Hardware StructureThis section describes the hardware structure of the NetBackup 5200.

1.4 PanelThis section describes the front panel, rear panel, ports, and indicators of the NetBackup 5200.

1.5 FeaturesThis section describes the features of the NetBackup 5200, such as energy saving, large capacity,reliability, and manageability.

1.6 Technical SpecificationsThis section describes the technical specifications of the NetBackup 5200.

1.7 Environmental RequirementsThis section describes the requirements of the NetBackup 5200 on the operating environmentand storage environment.

1.8 Standards Compliant and CertificatesThis section describes the standards that the NetBackup 5200 complies with and the certificatesthat the NetBackup 5200 has obtained.

NetBackup 5200Product Description 1 Product Introduction

Issue 02 (2011-03-28) Symantec Corporation 1-1

1.1 Product AppearanceThis section describes the appearance of the NetBackup 5200.

The NetBackup 5200 is 4U high and contains 24 disks. Figure 1-1 shows the appearance of theNetBackup 5200.

Figure 1-1 NetBackup 5200 appearance

l The height, width, and depth of the NetBackup 5200 are respectively 175 mm, 446 mm,685 mm.

l It can be installed in a standard 19-inch cabinet or in a cabinet with a depth of 1,000 mm(or larger).

1.2 Product ConfigurationThis section describes the hardware configuration of the NetBackup 5200.

Table 1-1 lists the product configuration of the NetBackup 5200.

Table 1-1 Product configuration of the NetBackup 5200

Item Index

Basic feature 4U a/ 24 disk slots

Processor type andquantity

Two quad-core E5620 CPUs

Memory type andcapacity

l Memory capacity: 32GB

l DDR3 b

1 Product IntroductionNetBackup 5200

Product Description

1-2 Symantec Corporation Issue 02 (2011-03-28)

Item Index

Disk type and quantity l Twenty-four 2 TB 7,200 rpm SATA c disks

l Maximum raw capacity: 48 TB

RAID level RAID 1 and RAID 6l System disk: RAID 1

l Data disk: RAID 6

I/O port l One 100 Mbit/s IPMI management network port

l One VGA d port

l One RJ-45 serial port, with a transfer rate of 115,200 baud rate

l Two USB e 2.0 ports

l Two GE f service network ports, with the RJ-45 connector andlink/active indicator

l Configuration mode 1:– Two 10GE service network ports or four GE service network

ports– Two 8Gb FC ports

l Configuration mode 2:Six 8Gb FC ports

a: 1 U = 44.45 mmb: 3rd Generation Double Data Rate SDRAMc: Serial Advanced Technology Attachmentd: Video Graphics Arraye: Universal Serial Busf: Gigabit Ethernet

1.3 Hardware StructureThis section describes the hardware structure of the NetBackup 5200.

The NetBackup 5200 can be configured in two modes, as shown in Table 1-2.



Table 1-2 The parts of the NetBackup 5200

Configuration mode 1 Configuration mode 2

l Chassis

l Disk module

l Power module

l Backplane

l Fan module

l Mainboard

l RAID (Redundant array of independentdisks) card

l 10GE NIC(Gigabit Ethernet NetworkInterface) or 4-port GE NICa

l 8Gb FC HBA (Fiber Channel Host BusAdapter)

l Chassis

l Disk module

l Power module

l Backplane

l Fan module

l Mainboard

l RAID card

l 8Gb FC HBA

a: You can choose from 10GE NIC and 4-port GE NIC, you can only choose one of them.

The NetBackup 5200 adopts the modular design. Figure 1-2 shows the overall hardwarestructure of the NetBackup 5200.


Product Description


Figure 1-2 Overall hardware structure of the NetBackup 5200

1 Disk module 4 Backplane

2 Chassis 5 Power module

3 Fan module 6 Mainboard

Figure 1-3 shows the four PCI-E slots resides on the mainboard when configuration mode 1 isemployed.



Figure 1-3 PCI-E slots on the mainboard (Configuration mode 1)

12 3 4

1 Slot 0: RAID card 3 Slot 2: 10GE NIC or 4-port GE NIC

2 Slot 1: None 4 Slot 3: 8Gb FC HBA

Figure 1-4 shows the four PCI-E slots resides on the mainboard when configuration mode 2 isemployed.

Figure 1-4 PCI-E slots on the mainboard (Configuration mode 2)

12 3 4

1 Slot 0: RAID card 3 Slot 2: 8Gb FC HBA

2 Slot 1: 8Gb FC HBA 4 Slot 3: 8Gb FC HBA

1.4 PanelThis section describes the front panel, rear panel, ports, and indicators of the NetBackup 5200.


Product Description


1.4.1 Front PanelThis section describes the front panel of the NetBackup 5200.

1.4.2 Rear PanelThis section describes the rear view of the NetBackup 5200.

1.4.1 Front PanelThis section describes the front panel of the NetBackup 5200.

Figure 1-5 shows the front view of the NetBackup 5200.

Figure 1-5 Front view of the NetBackup 5200

1 Disk handle 5 Enclosure handle

2 Disk module 6 Disk read/write status indicator

3 System power indicator 7 Disk online status indicator

4 System alarm/location indicator

Table 1-3 lists the indicators of the front view.

Table 1-3 Description of the indicators of the NetBackup 5200

Location Type Color Status Description

Chassis System powerindicator

Green On The device is powered on.

- Off The device is not powered on.

System alarm/locationindicator

Red On An alarm occurred on the device.

Blinking A fault occurred on the powermodule.




Orange On Locating the device a.

- Off The device is running normally.

SATA diskmodule

Disk onlinestatus indicator

Green On The disk is powered on normally.

Red On A disk alarm occurred or the diskis not ready.

- Off The disk is not powered on.

Disk read/writestatus indicator

Green Blinking Data is being transferred.

- Off No data is being transferred.

a: A location command is sent through the management system.

From bottom to top and right to left, the 24 slots of the NetBackup 5200 are numbered from ato x, with the bottom right one numbered a. The slot number a, b, c...v, w, or x correspond tothe slot number 0, 1, 2...21, 22, or 23.

Figure 1-6 shows the disk slots.

NOTE

l Disks in slot a and slot b are system disks that form a RAID 1 group. Do not remove or insert the systemdisks unnecessarily. Otherwise, the system data may be damaged.

l Disks in slot c and slot d are the global hot spare disks.

l Disks in other slots are data disks that form a RAID 6 group.

Figure 1-6 Disk slots of the NetBackup 5200

Slot a

Slot b

Slot c

Slot d

Slot e

Slot f

Slot g

Slot l

Slot m

Slot r

Slot s

Slot x

1.4.2 Rear PanelThis section describes the rear view of the NetBackup 5200.


Product Description


Configuration Mode 1

Figure 1-7 shows the rear view of the NetBackup 5200.

Figure 1-7 Rear view of the NetBackup 5200

2PORT 2

48

2PORT 1

48

2PORT 2

48

2

TXR

XTX

RX

PORT 148

2PORT 2

48

2PORT 1

48

1 System power switch 11 Link indicator of the service network port

2 System reset button 12 VGA port

3 Slot 3: 8Gb FC HBA 13 Serial port

4 Slot 2: 10GE NIC or 4-port GE NIC 14 USB 2.0 port

5 Slot 0: RAID card 15 Power fan

6 System alarm/location indicator 16 Power module handle

7 Link indicator of the management network port 17 Power run/alarm indicator

8 Active indicator of the management network port 18 Power socket

9 Service network port 19 Power module spring leaf

10 Active indicator of the service network port

Figure 1-8 shows the ports of the NetBackup 5200.



Figure 1-8 Ports of the NetBackup 5200

2PORT 2

48

2PORT 1

48

1 8Gb FC port 5 Service network port (NIC 2)

2 10GE service network port or GE servicenetwork port

6 VGA port

3 IPMI management network port 7 Serial port

4 Service network port (NIC 1) 8 USB 2.0 port

Table 1-4 lists the ports of the rear view.

Table 1-4 Description of the ports of the rear view.

Name Quantity Model Function

USB 2.0 port 2 A Connects the mouse, keyboard, and otherUSB 2.0 devices.

Serial port 1 RJ45 Extends functions of the OS and third-partysoftware.

VGA port 1 D15 Connects to the monitor.

Managementnetwork port

1 RJ45 Device hardware is managed through thisFast Ethernet (FE) port.

Servicenetwork port(NIC 1)

1 RJ45 NIC 1 is a management network port and itsIP address is 192.168.1.1/24. Through this IPaddress, the user can log in to the OS forconfiguration. NIC 1 is connected to themanagement computer.


1 RJ45 Connects to the backup network.

10GE servicenetwork port

2 or 0 SFP+ Connects to the backup network.


Product Description



GE servicenetwork port

4 or 0 RJ45 Connects to the backup network.

8Gb FC port 2 SFP+ l Connects to a tape library.

l Connects to the backup network.

Table 1-5 lists the indicators of the rear view.

Table 1-5 Description of the indicators of the NetBackup 5200


Powermodule

Power running/alarm indicator

Green On The AC power is normal.

Green Blinking The AC input is normal, and thedevice is not powered on.

Orange On A power alarm occurred.

- Off The power module failed or is notconnected to the main powersupply.

Mainboard Fan running/alarm indicator

Green On The fan is running normally.

Red On A fan alarm occurred.

Rear panel Link indicator ofmanagementnetwork port

Green On The link of the managementnetwork port is normal.

- Off No link.

Active indicatorof themanagementnetwork port

Yellow Blinking Data is being transferred.


Link indicator ofthe servicenetwork port

Green On Data is being transferred at a rateof 1,000 Mbit/s.

Yellow On Data is being transferred at a rateof 100 Mbit/s.

- Off Data is being transferred at a rateof 10 Mbit/s, or no link.

Active indicatorof servicenetwork port

Yellow Blinking Data is being transferred.


Table 1-6 lists the indicators of the 10GE NIC.



Table 1-6 Description of indicators on the 10GE NIC

Type Color Status Description

ACT/LNK

Green Blinking The link is normal and data is being transferred.

Green On The link is normal.

- Off No link.

GRN=10G

- Off No link.

Green On Data is being transferred at a rate of 10 Gbit/s.

Yellow On Data is being transferred at a rate of 1 Gbit/s.

Table 1-7 lists the indicators of the 4-port GE NIC.

Table 1-7 Description of indicators on the 4-port GE NIC


ACT



- Off No link.

LNK

- Off Data is being transferred at a rate of 10 Mbit/s.

Green On Data is being transferred at a rate of 100 Mbit/s.

Amber On Data is being transferred at a rate of 1 Gbit/s.

Table 1-8 lists the indicators of the 8Gb FC HBA.

Table 1-8 Description of indicators on the 8Gb FC HBA

8/Yellow 4/Green 2/Amber Description

Off Off Off Power off.

Off Off On/Blinking Data is being transferred at a rate of 2 Gbit/s.

Off On/Blinking Off Data is being transferred at a rate of 4 Gbit/s.

On/Blinking Off Off Data is being transferred at a rate of 8 Gbit/s.

On On On Power on (before firmware initialization).

Blinking Blinking Blinking Power on (after firmware initialization).


Product Description



Blinking alternately Firmware error.

Configuration Mode 2Figure 1-9 shows the rear view of the NetBackup 5200.

Figure 1-9 Rear view of the NetBackup 5200

2PORT 2

48

2PORT 1

48

2PORT 2

48

2PORT 1

48

2PORT 2

48

2PORT 1

48

2PORT 2

48

2

TXR

XTX

RX

PORT 148

2PORT 2

48

2PORT 1

48

1 System power switch 11 Active indicator of the service networkport

2 System reset button 12 Link indicator of the service network port

3 Slot 3: 8Gb FC HBA 13 VGA port

4 Slot 2: 8Gb FC HBA 14 Serial port



5 Slot 1: 8Gb FC HBA 15 USB 2.0 port

6 Slot 0: RAID card 16 Power fan

7 System alarm/location indicator 17 Power module handle

8 Link indicator of the management network port 18 Power run/alarm indicator

9 Active indicator of the management network port 19 Power socket

10 Service network port 20 Power module spring leaf

Figure 1-10 shows the ports of the NetBackup 5200.

Figure 1-10 Ports of the NetBackup 5200

2PORT 2

48

2PORT 1

48

2PORT 2

48

2PORT 1

48

2PORT 2

48

2PORT 1

48

1 8Gb FC port 6 Service network port (NIC 2)

2 8Gb FC port 7 VGA port

3 8Gb FC port 8 Serial port

4 IPMI management network port 9 USB 2.0 port

5 Service network port (NIC 1)

Table 1-9 lists the ports on the NetBackup 5200.

Table 1-9 Description of the ports on the NetBackup 5200


USB 2.0 port 2 A Connects the mouse, keyboard, and otherUSB 2.0 devices.

Serial port 1 RJ45 Extends functions of the OS and third-partysoftware.

VGA port 1 D15 Connects to the monitor.


Product Description



Managementnetwork port

1 RJ45 Device hardware is managed through thisFast Ethernet (FE) port.


1 RJ45 NIC 1 is a management network port and itsIP address is 192.168.1.1/24. Through this IPaddress, the user can log in to the OS forconfiguration. NIC 1 is connected to themanagement computer.


1 RJ45 Connects to the backup network.

8Gb FC port 6 SFP+ l Connects to a tape library.

l Connects to the backup network.

Table 1-5 lists the indicators of the rear view.

Table 1-8 lists the indicators of the 8Gb FC HBA.

NOTE

When the NetBackup 5200 is configured with only one power module, the power module is installed inposition 18 in Figure 1-7 and position 19 in Figure 1-9.

1.5 FeaturesThis section describes the features of the NetBackup 5200, such as energy saving, large capacity,reliability, and manageability.

Table 1-10 lists the features of the NetBackup 5200.

Table 1-10 Features of the NetBackup 5200

Feature Description

Energy saving l Supports disk soft start after power-on, controlling the disk startupcurrent and reducing the overall power consumption of the device.

l Supports high-efficiency power modules, reducing powerconsumption.

l Supports intelligent fan speed control, reducing the powerconsumption of devices.



Feature Description

High performanceand large capacity

l Supports up to 24 SATA disks, with a raw capacity of up to 48 TB.

l Supports high-performance processors with low powerconsumption.

l Provides large-capacity intra-system switching bandwidths andhigh I/O throughout.

l Provides eight DIMMs a and supports 32 GB memory .

l Supports IOAT b to meet the diverse requirements on processingcapability.

l Supports RAID 1 and RAID 6.

High reliability l Supports redundant power modules.

l Supports hot-swappable disk modules and power modules.

l MTBFc > 105 h.

Easy management l Provides separate out-of-band management network interfaces,allowing customers to remotely power on, power off, and resetdevices through the network.

l Supports remotely configuring and managing devices throughKVM d over IP.

l Provides customized management interfaces, simplifyingmaintenance operations and saving maintenance labor.

l Supports DHCP e and automatically obtains the IP address from themanagement server, thus reducing configuration operations.

l Supports SNMP f Trap and automatically reports alarms.

l Supports reporting the disk information through the out-of-bandmanagement channel.

a: Dual Inline Memory Moduleb: Input/Output Acceleration Technologyc: Mean Time between Failuresd: Keyboard Video Mousee: Dynamic Host Configuration Protocolf: Simple Network Management Protocol

1.6 Technical SpecificationsThis section describes the technical specifications of the NetBackup 5200.

Table 1-11 lists the technical specifications of the NetBackup 5200.


Product Description


Table 1-11 Technical specifications of the NetBackup 5200

Item Sub Item Index

WeightMaximum weight a 47 kg

Transportation weight b 71 kg

Dimensions H x W x D 175 mm x 446 mm x 685 mm

Power consumption Maximum power 700 W

Power parametersAC voltage range 100 V to 127 V, 200 V to 240 V

AC frequency range 47 Hz to 63 Hz

Inherentavailability of thesystem

- ≥ 99.95%

MTTR c - < 1 h

a: The maximum weight refers to the weight of the NetBackup 5200 with twenty-four diskmodules, two power modules, eight memory modules, RAID card and 8Gb FC HBA.b: The transportation weight is the sum of the maximum weight of the NetBackup 5200 andthe maximum weight of the transportation materials.c: Mean Time to Repair

1.7 Environmental RequirementsThis section describes the requirements of the NetBackup 5200 on the operating environmentand storage environment.

Table 1-12 lists the environmental requirements of the NetBackup 5200.

Table 1-12 Environmental requirements of the NetBackup 5200

Item Index

Operating temperature a 5°C to 35°C (41°F to +95°F)

Storage temperature -40°C to +70°C (-40°F to +158°F)

Transportation temperature -40°C to +70°C (-40°F to +158°F)

Temperature gradient 10°C/h

Operating humidity 10% RH to 85% RH

Operating altitude -30.5 m to +3,000 m

Storage altitude -30.5 m to +3,000 m

Operating altitude -30.5 m to +3,000 m



Item Index

Noise b < 72 dBA

a: When the altitude ranges from -60 m to +1,800 m, the ambient temperature ranges from 5°C to 35°C. When the altitude ranges from 1,800 m to 3,000 m, the environment temperaturedecreases by 0.6°C every time the altitude increases by 100 m.b: The maximum noise of the NetBackup 5200 when the ambient temperature is 25°C.

1.8 Standards Compliant and CertificatesThis section describes the standards that the NetBackup 5200 complies with and the certificatesthat the NetBackup 5200 has obtained.

Protocols and Standards

Table 1-13 lists the protocols and standards that NetBackup 5200 complies with.

Table 1-13 Protocols and standards that the NetBackup 5200 complies with

Name Standard No.

IPMI2.0 Intelligent Platform Management Interface Specification Second Generationv2.0, Document Revision 1.0

SMBIOS System Management BIOS (SMBIOS) Reference Specification, Version 2.5

SATA II Serial ATA Working Group, Serial ATA II: Extensions to Serial ATA.Revision 1.0a

ACPI Advanced Configuration and Power Interface Specification, Revision 3.0,September 2

IP RFC0791: Internet Protocol

Safety Standards and EMC Standards

Table 1-14 lists the safety standards and EMC standards that the NetBackup 5200 complieswith.

Table 1-14 Safety standards and EMC standards

Name Standard No.

IT Equipment Safety Standard GB4943-2001

IEC standard IEC 60950-1

UL safety standard UL 60950-1


Product Description


Name Standard No.

US EMC standard FCC, 47 CFR Part 15, Subpart B

European safety standard EN 60950-1

European EMC directive EMC Directive 2004/108/EC

European EMC standard EN 55024: 1998+A1+A2

European safety directive LVD Directive 2006/95/EC

Industry StandardsTable 1-15 lists the industry standards that the NetBackup 5200 complies with.

Table 1-15 Industry standards

Name Standard No.

Ethernet standard IEEE 802.3

FE standard IEEE 802.3u

GE standard IEEE 802.3z

IEEE standard test interface and boundary-scan architecture

IEEE 1149.1-2001

Failure mode and effects analysis (FMEA)process

IEC 812

Reliability, maintainability and availabilitystandard

IEC 863

Environmental protection ECMA TR/70

CertificatesTable 1-16 lists the certificates the NetBackup 5200 has obtained.



Table 1-16 Certificates

Name Description

CB The IEC System for Conformity Testing to Standards for Safety of ElectricalEquipment (referred to as the IECEE) is based on the use of specific IECstandards for electrical equipment. The CB Scheme is applicable to electricalequipment within the scope of IEC standards for safety, accepted for use inthe IECEE. The Scheme becomes operative for such standards as soon as atleast one National Certification Body has declared their recognition of CB TestCertificates. The purpose of the CB Scheme is to eliminate the internationaltrade protection that is caused by the different certifications and standards ofdifferent nations.

CCC CCC (China Compulsory Certification), which is released for the productsrelating to human health and safety, lives and health of animals and plants,environmental protection, and public safety.

CE CE (Conformite Europeenne), including EMC directive 2004/108/EC and lowvoltage directive 2006/95/EC.

C-tick A product with a C-tick compliance label complies with applicable EMC andradiocommunication requirements. The C-tick label is mandatory for relatedproducts in Australia and New Zealand.

FCC Chapter 15 in FCC (Federal Communications Commission) Rules andRegulations. The device conforms to the standard for level A digital deviceaccording to the test.

REACH REGULATION (EC) No 1907/2006 OF THE EUROPEAN PARLIAMENTAND OF THE COUNCIL of 18 December 2006 concerning the Registration,Evaluation, Authorization and Restriction of Chemicals (REACH) is acompellent management rule to manage all the chemicals entering intoEuropean market preventively.

RoHS RoHS (Restriction of the Use of Certain Hazardous Substances), a directivefor environmental protection released by the EU in 2003. Management on theenvironmental impact from the electrical and electronic products during at theproduction and disposal stages. RoHS restricts the maximum amount of thehazardous substances of the products at the production stage.

UL UL (Underwriters Laboratories) is a non-profit safety test and certificationorganization.

WEEE The EU Directive on Waste of Electric and Electronic Equipment. Electricaland electronic products sold in the EU market must comply with this directiveand have the mark of cross out of the wheeled bin.


Product Description


2 Product Components

About This Chapter

This section describes the features, operating principles, and technical specifications of theNetBackup 5200.

2.1 ChassisThis section describes the appearance, features, and technical specifications of the chassis.

2.2 Disk ModuleThis section describes the appearance, features, and technical specifications of the disk module.

2.3 Power ModuleThis section describes the features, appearance, and technical specifications of the powermodule.

2.4 BackplaneThis section describes the appearance, features, and ports of the backplane.

2.5 Fan ModuleThis section describes the appearance, features, and technical specifications of the fan module.

2.6 MainboardThis section describes the appearance, features, and portsof the mainboard.

2.7 RAID CardThis section describes the appearance and features of the RAID card.

2.8 10GE NICThis section describes the features, panels , and technical specifications of the 10GE NIC.

2.9 GE NIC (Configuration Mode 1)This section describes the features, panels, and technical specifications of the 4-port GE NIC.

2.10 8Gb FC HBAThis section describes the features, panels, and technical specifications of the 8Gb FC HBA.

NetBackup 5200Product Description 2 Product Components


2.1 ChassisThis section describes the appearance, features, and technical specifications of the chassis.

AppearanceFigure 2-1 shows the appearance of the chassis.

Figure 2-1 Appearance of the chassis

FeaturesThe chassis offers the following features:l The chassis accommodates all components.

l The air channels and holes in the chassis are used to dissipate heat for all components.

Technical SpecificationsThe technical specifications of the chassis are as follows:l Dimensions (H x W x D): 175 mm x 446 mm x 685 mm.

l It can be installed in a standard 19-inch cabinet or in a cabinet with a depth of 1,000 mm(or larger).

2.2 Disk ModuleThis section describes the appearance, features, and technical specifications of the disk module.

AppearanceThe NetBackup 5200 supports 24 SATA disks. A SATA disk module consists of the disk handle,disk tray, SATA disk, and SATA convertor.

2 Product ComponentsNetBackup 5200

Product Description


Figure 2-2 shows the disk module.

Figure 2-2 Disk module

1

4

32

1 Disk handle 3 SATA disk

2 Disk tray 4 SAS convertor

FeaturesThe disk module has the following features:

l Accommodates the OSThe OS of the NetBackup 5200 is installed on the system disks, disks in slot a and slot b.Figure 1-6 shows the location of slot a and slot b.

CAUTIONl Do not insert or remove the system disks while the system is powered on.

l Do not use the system disk as the hot spare disk.

l Provides the global hot spare disksThe disks in slot c and slot d are designated as the hot spare disks. Figure 1-6 shows thelocation of slot c and slot d.

l Provides storage capacityThe NetBackup 5200 can provide storage capacity for storing other data besides the systemdata on the system disks. Except for the system disks and hot spare disks, all other disk aredata disks and provide storage capacity.

CAUTIONWhen data is being read or written on disks, do not power off the device by turning off themains power or pressing the power button. Otherwise, the disks data may be damaged. Topower off the device, stop reading and writing data on the disks first and then send ashutdown command through the OS.



Technical Specifications

The technical specifications of the disk module are as follows:

l 2 TB 7,200 rpm SATA disk

l Hot-swappable disks

2.3 Power ModuleThis section describes the features, appearance, and technical specifications of the powermodule.

Features

The power module provides power for the NetBackup 5200. There are two AC power moduleslots at the back of the NetBackup 5200 chassis.

The power modules support hot swapping. A fault on one power module does not affect thenormal running of the NetBackup 5200.

Appearance

The AC power module provides power for the NetBackup 5200 when the operating temperatureranges from 5℃ to 35℃ and the AC voltage ranges from 100 V to 127 V, or 200 V to 240 V.

Figure 2-3 shows the AC power module.

Figure 2-3 AC power module

1 2 3 4 5

1 Power module spring leaf 4 Power fan

2 Power socket 5 Power module handle

3 Power running/alarm indicator

For details on the indicators of the power module, see Table 1-5.

Technical Specification

Table 2-1 lists the technical specifications of the AC power module.


Product Description


Table 2-1 Technical specifications

ParameterCategory

Parameter Value

Input features Input voltage range AC a 90 V to 264 V

Rated input voltage 100 V to 127 V/200 V to 240 V

Maximum input current ≤ 8.9 A at 90 V to 127 V

Rated input current ≤ 4.5 A at 200 V to 240 V

AC frequency range 47 Hz to 63 Hz

Output features Rated output voltage DC b 12 V/5 V

Output voltage range DC 11.4 V to 12.6 V/4.8 V to 5.25 V

Output current range 0 to 58 A/0 to 2 A

Output power 700 W

Output efficiency ≥ 80% at 100 V to 240 V

Operatingrequirements

Input overvoltage protectionrange

AC 75 V±5 V

Input overvoltage restorationrange

AC 85 V±4 V

Output overvoltage DC 13.5 V to 14.5 V/5.7 V to 6.5 V

Output current-limitingprotection

64 A to 87 A/3 A to 6 A

a: Alternating currentb: Direct current

2.4 BackplaneThis section describes the appearance, features, and ports of the backplane.

AppearanceFigure 2-4 shows the front view of the backplane.



Figure 2-4 Front view

1

Figure 2-5 shows the rear view of the backplane.

Figure 2-5 Rear view

2

3

4

1 SAS connector 3 Mini SAS port

2 Backplane power supply port 4 Sideband signal port

Features

The backplane:


Product Description


l Connects to 24 disks through the SAS connectors.

l Provides signal channels and power for 24 disks.

Port Description

Table 2-2 lists the ports on the backplane.

Table 2-2 Port description

Port Function

SAS port Connects to a SATA disk.

Backplane power supplyport

Connects to the power interface to provide power for thebackplane.

Mini SAS port Connects to the RAID card and transfers the SAS signalsbetween the mainboard and the backplane.

Sideband signal port Communicates with the mainboard through inter-integratedcircuit (IIC) signals and other signals.

2.5 Fan ModuleThis section describes the appearance, features, and technical specifications of the fan module.

Appearance

Figure 2-6 shows the appearance of the fan module.

Figure 2-6 Fan module

In Figure 2-6, fans are numbered 1, 2, 3, and 4, which correspond to the fan running/alarmindicators 1, 2, 3, and 4, as shown in Figure 2-7.



Figure 2-7 Location of the fan module and fan indicators

Featuresl The fan module dissipates heat for the NetBackup 5200.

l Fans automatically regulate speed according to internal ambient temperature.

CAUTIONFaults on any fan will decrease the maximum ambient temperature that the device can tolerate.


Table 2-3 lists the technical specifications of the fan module.

Table 2-3 Technical specifications of the fan module

Parameter Category Parameter Value

Dimensions (L x W x H) 80 mm x 80 mm x 38 mm

Lead length 350 mm

Number of pins 4

Connector spacing 2.5 mm

Basic electricalparameters

Rated voltage DC 12 V

Operating voltage DC 7 V to 13.2 V

Startup voltage DC ≤ 7 V

Standard operating current 1.7 A

Maximum operating current 2.5 A


Product Description


Parameter Category Parameter Value

Rated power 21 W

Maximum power ≤30 W

Rated rotational speed 10000 r/min

Rotational speed controlmode

PWM a

Speed adjustment modeand control signal mode

Speed adjustment voltagerange

DC -0.8 V to +20 V

Voltage range of high-levelinput signal

DC 2.8 V to 20 V

Voltage range of low-levelinput signal

DC -0.8 V to +0.4 V

Basic performanceindexes

Operating temperature -10°C to +60°C

Operating humidity 5% RH to 90% RH

Storage temperature -40°C to +70°C

Storage humidity 5% RH to 95% RH

a: Pulse-Width modulation

2.6 MainboardThis section describes the appearance, features, and portsof the mainboard.

AppearanceFigure 2-8 shows the appearance of the mainboard.



Figure 2-8 Appearance of the mainboard

1 Memory socket 7 IPMI Management network port

2 USB 2.0 port 8 CPU heat sink

3 Serial port 9 Slot 0: PCI-E x 8

4 VGA port 10 Slot 1: PCI-E x 8

5 Service network port (NIC 2) 11 Slot 2: PCI-E x 8

6 Service network port (NIC 1) 12 Slot 3: PCI-E x 4

NOTE

The slot 1 in Figure 2-8 is PCI-E x 16, but only the PCI-E x 8 slot is used in actual situations. Therefore,the mainboard provides one PCI-E x 4 and three PCI-E x 8 slots.

l The RAID card is installed in slot 0 in Figure 2-8.

l (Configuration mode 1) The 10GE NIC is installed in slot 2 in Figure 2-8.

l (Configuration mode 1) The 8Gb FC HBA is installed in slot 3 in Figure 2-8.

l (Configuration mode 2) The 8Gb FC HBA is installed in slot 1, slot 2 and slot 3 in Figure2-8.

Features

The mainboard processes services and provides inband and out-of-band management andbaseboard management controller (BMC) module. It supports IPMI 2.0 and monitors andmanages devices through an inband channel and an out-of-band channel.

NOTE

The inband channel management uses a service channel to manage the NetBackup 5200, such as the servicenetwork port; the out-of-band channel management uses the management channel to manage theNetBackup 5200, such as the management network port.


Product Description


Interface Description

Table 1-4 describes the interfaces on the mainboard.

2.7 RAID CardThis section describes the appearance and features of the RAID card.

The RAID card is plugged in the PCI-E x8 slot and used for expanding the eight SAS ports onthe mainboard by connecting the two internal Mini SAS cables to the two Mini SAS ports onthe backplane.

Appearance

Figure 2-9 shows the appearance of the RAID card.

Figure 2-9 Appearance of the RAID card

1 2

1 Mini SAS port 2 Battery Backup Unit (BBU)

Features

The RAID card has the following features:

l Flexible SAS/SATA disk array structure to reduce costs.

l Supporting RAID 1 and RAID 6 and integrating RAID functions to avoid extraconsumption on the CPU.

l Connecting SATA/SAS disks through the advanced serial technology.

l Configuring the Battery Backup Unit (BBU) to provide power failure protection.

2.8 10GE NICThis section describes the features, panels , and technical specifications of the 10GE NIC.

The 10GE NIC provides two 10GE network ports for backup.



AppearanceFigure 2-10 shows the 10GE NIC.

Figure 2-10 10GE NIC

Table 2-4 lists the indicators on the 10GE NIC.

Table 2-4 Description of indicators on the 10GE NIC


ACT/LNK



- Off No link.

GRN=10G

- Off No link.

Green On Data is being transferred at a rate of 10 Gbit/s.

Yellow On Data is being transferred at a rate of 1 Gbit/s.

Table 2-5 lists the ports on the 10GE NIC.

Table 2-5 Description of ports on 10GE NIC

Property Value

Connectors Two LC fiber-optic connectors

Port cables SFP+ Direct Attach cables

Data rate per port l Optical: 10 Gbit/s / 1 Gbit/s

l Direct attach: 10 Gbit/s

Network standard IEEE 802.3


Product Description


Technical SpecificationTable 2-6 lists the technical specifications of the 10GE NIC.

Table 2-6 Technical specifications of the 10GE NIC

Item Index

Dimensions 5.73 inches long, measured without PCI-E bracket

Typical powerconsumption

l Maximum power: 10.7 W

l Typical power: 10 W

Operating temperature 0°C to 55°C (32°F to 131°F)


Storage humidity 90% RH (35°C, non-condensing)

2.9 GE NIC (Configuration Mode 1)This section describes the features, panels, and technical specifications of the 4-port GE NIC.

The model of the 4-port GE NIC is Intel E1G44HT. The 4-port GE NIC provides four GEnetwork ports for backup or replication.

AppearanceFigure 2-11 shows the 4-port GE NIC.

Figure 2-11 4-port GE NIC

Table 2-7 lists the indicators on the 4-port GE NIC.



Table 2-7 Description of indicators on the 4-port GE NIC


ACT



- Off No link.

LNK

- Off Data is being transferred at a rate of 10 Mbit/s.

Green On Data is being transferred at a rate of 100 Mbit/s.

Amber On Data is being transferred at a rate of 1 Gbit/s.

Table 2-8 lists the description of the ports on the 4-port GE NIC.

Table 2-8 Description of ports on 4-port GE NIC

Property Value

Connectors RJ45

Port cables Category-5, UTP (Unshielded Twisted Pair)

Network standard IEEE 802.3

Technical SpecificationTable 2-9 lists the technical specifications of the 4-port GE NIC.

Table 2-9 Technical specifications of the 4-port GE NIC

Item Index

Dimensions l Length: 5.33 inches

l Width: 2.71 inches


4.3W



Storage humidity 90% RH (35°C, non-condensing)

2.10 8Gb FC HBAThis section describes the features, panels, and technical specifications of the 8Gb FC HBA.


Product Description


The model of the 8Gb FC HBA is QLE2562.

The 8GB FC HBAs in slots 1 and 2 provide six 8Gb FC ports for backup or tape out.

NOTE

The 8GB FC HBA in slot 3 can provide two tape out FC ports, by using the tape out card (Fibre Channel),data can be exported from the NetBackup 5200 to a tape library for offline storage.

Appearance

Figure 2-12 shows the 8Gb FC HBA.

Figure 2-12 8Gb FC HBA

Table 2-10 lists the indicators on the 8Gb FC HBA.

Table 2-10 Description of indicators on the 8Gb FC HBA


Off Off Off Power off.

Off Off On/Blinking Data is being transferred at a rate of 2 Gbit/s.

Off On/Blinking Off Data is being transferred at a rate of 4 Gbit/s.

On/Blinking Off Off Data is being transferred at a rate of 8 Gbit/s.

On On On Power on (before firmware initialization).

Blinking Blinking Blinking Power on (after firmware initialization).

Blinking alternately Firmware error.

Table 2-11 lists the description of the ports on the 8Gb FC HBA.



Table 2-11 Description of ports on 8Gb FC HBA

Property Value

Connectors Dual 8Gbps Fibre Channel

Port cables SFP+ with LC-style connector

Technical SpecificationTable 2-12 lists the technical specifications of the 8Gb FC HBA.

Table 2-12 Technical specifications of the 8Gb FC HBA

Item Index

Dimensions l Length: 6.6 inches

l Width: 2.54 inches


Typical power: 6.2 W



Storage humidity l 10% RH to 90% RH (operating, non-condensing)

l 5% RH to 93% RH (non-operating, non-condensing)


Product Description


3 Device Cable

About This Chapter

This chapter describes the structure, cable connection list, and technical specifications of theexternal cables used in the NetBackup 5200.

3.1 Power Cable and Grounding CableThis section describes the structure, cable connection list, and technical specifications of thepower cables and grounding cables used in the NetBackup 5200.

3.2 Signal CableThis section describes the structure, cable connection list, and technical specifications of theexternal signal cables used in the NetBackup 5200.

NetBackup 5200Product Description 3 Device Cable


3.1 Power Cable and Grounding CableThis section describes the structure, cable connection list, and technical specifications of thepower cables and grounding cables used in the NetBackup 5200.

3.1.1 Power CableThis section describes the structure, cable connection list, and technical specifications of thepower cable.

3.1.2 Grounding CableThis section describes the structure, cable connection list, and technical specifications of thegrounding cable.

3.1.1 Power CableThis section describes the structure, cable connection list, and technical specifications of thepower cable.

Each AC power module of the NetBackup 5200 is configured with one AC power cable. Oneend of the AC power cable is connected to the power socket of the NetBackup 5200, and theother end is connected to the external power supply to provide power for the NetBackup 5200.

NOTE

Power cables are subject to different regions. International standard cables are used as an example in thisdocument

StructureFigure 3-1 shows the structure of the AC power cable.

3 Device CableNetBackup 5200

Product Description


Figure 3-1 Structure of the AC power cable

3000

4

14

23

15.8

120° 120°7.9

10.3E

L N

EN L

Main Label （M）

A

A B

B

X1 X2 18

21

1 2

W

1 AC power connector compliant with the international standard

2 AC power connector compliant with the international standard

A power cable includes live line, neutral line, and grounding line, respectively as shown in L,N, and E in directions A and B in Figure 3-1.

Cable Connection List

Table 3-1 lists the cable connection list of the power cable.

Table 3-1 Cable connection list of the power cable

Start End Color

X1.L X2.L Brown

X1.N X2.N Blue

X1.E X2.E Yellow/Green




Table 3-2 lists the technical specifications of the power cable.

Table 3-2 Technical specifications of the power cable

Item Description

Terminal X1/X2 AC power connector compliant with national standard-3PIN-10A-250 V

Cable type 227IEC53 (RVV)-3 x 1 mm2-Black

3.1.2 Grounding CableThis section describes the structure, cable connection list, and technical specifications of thegrounding cable.

The NetBackup 5200 is configured with one grounding cable. One end of the cable connects tothe grounding clip of the NetBackup 5200, and the other end connects to the grounding terminalof the NetBackup 5200 cabinet to ensure the safe operation of the NetBackup 5200.

Structure

Figure 3-2 shows the structure of the grounding cable.

Figure 3-2 Structure of the grounding cable

1 Bare connector-OT type


Table 3-3 lists the technical specifications of the grounding cable.

Table 3-3 Technical specifications of the grounding cable

Item Description

Terminal X1/X2 Bare connector-OT-6 mm2-M6-Tin plated-Round insulated terminal-12to 10 AWG-Yellow

Cable type Power cable-450/750V-H07Z-K-6 mm2-Yellow green


Product Description


Item Description

Cable length 0.5 m

3.2 Signal CableThis section describes the structure, cable connection list, and technical specifications of theexternal signal cables used in the NetBackup 5200.

3.2.1 Network CableThis section describes the structure, cable connection list, and technical specifications of thenetwork cable.

3.2.2 Multi-Mode FiberThis section describes the structure and technical specifications of the multi-mode fiber.

3.2.3 Serial CableThis section describes the structure, cable connection list, and technical specifications of theserial cable.

3.2.1 Network CableThis section describes the structure, cable connection list, and technical specifications of thenetwork cable.

The NetBackup 5200 communicates with the outside through a network cable. One end of thenetwork cable connects to the management network port or service network port of theNetBackup 5200, and the other end connects to the network switch or the AS. Both ends of thecable are RJ-45 connectors.

StructureFigure 3-3 shows the structure of the network cable.

Figure 3-3 Structure of the network cable

1 RJ-45 connector

Cable Connection ListTable 3-4shows the cable connection list of the network cable.



Table 3-4 Cable connection list of the network cable

Connector X1 Connector X2 Color Mapping

X1.2 X2.2 OrangeOne twisted pair

X1.1 X2.1 White/Orange

X1.6 X2.6 GreenOne twisted pair

X1.3 X2.3 White/Green

X1.4 X2.4 BlueOne twisted pair

X1.5 X2.5 White/Blue

X1.8 X2.8 BrownOne twisted pair

X1.7 X2.7 White/Brown


Table 3-5 lists the technical specifications of the network cable.

Table 3-5 Technical specifications of the network cable

Item Description

Connector X1/X2 Network port connector-8PIN-8 bit-Shielded-RJ-45 connector

Cable type Communication cable-Category 5 Shielded twisted pair-24 AWG

Number of cores 8

Core radius 0.53 mm

3.2.2 Multi-Mode FiberThis section describes the structure and technical specifications of the multi-mode fiber.

The NetBackup 5200 communicates with the FC switch through a multi-mode fiber. One endof the multi-mode fiber connects to the 10GE service network port or FC port , and the otherend connects to the FC switch or the tape library. The two ends of the multi-mode fiber are LCconnectors.

NOTE

Fibers are not delivered with goods. They need to be prepared by customers themselves.

Structure

Figure 3-4 shows the structure of the multi-mode fiber.


Product Description


Figure 3-4 Structure of the multi-mode fiber

Technical SpecificationsTable 3-6 lists the system technical specifications of the multi-mode fiber.

Table 3-6 Technical specifications of the multi-mode fiber

Item Description

Laser wavelength 850 nanometer (not visible)

Cable type to use Multi-mode fiber with 62.5µm or 50µm core diameter

Connector type LC

Maximum cable length 300 meters

3.2.3 Serial CableThis section describes the structure, cable connection list, and technical specifications of theserial cable.

The NetBackup 5200 communicates with the maintenance terminal through a serial cable.

StructureFigure 3-5 shows the structure of the serial cable.

Figure 3-5 Structure of the serial cableVIEW A 1 2

W

M016 M059

Pos.9

A

Pos.1Pos.8Pos.1

3mX1 X2

A

B

B

Main Label VIEW B

1 Cable connector 2 Network port connector

The network port connector end of the serial cable connects to the system serial port of theNetBackup 5200, and the cable connector end connects to the system serial port of themaintenance terminal.



Cable Connection ListTable 3-7 lists the cable connection list of the serial cable.

Table 3-7 Cable connection list of the serial cable

Connector X1 Connector X2

X1.2 X2.3

X1.3 X2.6

X1.5 X2.5

Technical SpecificationsTable 3-8 lists the technical specifications of the serial cable.

Table 3-8 Technical specifications of the serial cable

Item Description

Connector X1 Cable connector-D type-9PIN-Female-Welding type

Connector X2 Network port connector-Single row-Single port-8PIN-8bit-Shielded-Connector-AWG26-28AWG-Inner conductor stranded cable

Cable type Symmetric twisted pair-UL2464-0.32 mm-28 AWG-2 pairs-PantoneWARM GRAY 1 U

Number ofcores

8

Cable length 3 m


Product Description


A Abbreviations and Acronyms

This section describes acronyms and abbreviations referred to in this document.

A

AC Alternating Current

B

BBU Battery Backup Unit

BIOS Basic Input/Output System

BMC Baseboard Management Controller

C

CCC China Compulsory Certification

CE Conformite Europeenne

CPU Central Processing Unit

D

DC Direct Current

DDR3 3rd Generation Double Data Rate SDRAM

DHCP Dynamic Host Configuration Protocol

DIMM Dual Inline Memory Module

F

FC Fiber Channel

FCC Federal Communications Commission

NetBackup 5200Product Description A Abbreviations and Acronyms

Issue 02 (2011-03-28) Symantec Corporation A-1

G

GE Gigabit Ethernet

H

HBA Host Bus Adapter

I

IIC Inter-Integrated Circuit

IOAT Input/Output Acceleration Technology

IPMI Intelligent Platform Management Interface

K

KVM Keyboard Video Mouse

L

LC Lucent Connector

M

MTBF Mean Time Between Failures

MTTR Mean Time To Repair

N

NIC Network Interface Card

P

PCI-E Peripheral Component Interconnect Express

R

RAID Redundant Array of Independent Disks

REACH Registration, Evaluation, Authorization and Restriction ofChemicals

RoHS Restriction of the Use of Certain Hazardous Substances

A Abbreviations and AcronymsNetBackup 5200

Product Description

A-2 Symantec Corporation Issue 02 (2011-03-28)

S

SAS Serial Attached SCSI

SATA Serial Advanced Technology Attachment

SNMP Simple Network Management Protocol

T

TOC Total Cost of Ownership

U

UL Underwriters Laboratories

USB Universal Serial Bus

V

VGA Video Graphics Array

NetBackup 5200Product Description A Abbreviations and Acronyms

Issue 02 (2011-03-28) Symantec Corporation A-3

Product Description - Cornerstone OnDemand · Product Description Issue 02 Date 2011-03-28 Symantec...

Documents

Transcript of Product Description - Cornerstone OnDemand · Product Description Issue 02 Date 2011-03-28 Symantec...