PRODUCT DATA SHEET AMDRY Insulated Subfloor Panel
2
21 JANUARY 2020 www.amvicsystem.com BUILD TO A HIGHER STANDARD 501 McNicoll Avenue Toronto, ON, CA, M2H 2E2 Toll Free: 1 (877) 470-9991 • Fax: (416) 759-7402 PRODUCT DATA SHEET AMDRY PRO0291 Insulated Subfloor Panel WARM, DRY, COMFORTABLE Amvic Advantage • Panels are installed quickly and easily locked using the 100% recycled polypropylene flexible connectors. • The hollow core of the connectors allows for expansion of the enre floor assembly that naturally occurs when dry wood is introduced to high humidity areas. This compression joint virtually eliminates buckling or heaving of the floor surface due to excessive expansion. • The larger panel size is able to accommodate minor irregularies and slopes while, reducing joints, cung and installaon me. Applicaons • Concrete basement floors • Garage or workshop floors • Exercise rooms • Home theaters • Play rooms Amdry is a Do-It-Yourself (DIY) all-in-one insulated subfloor system with an integrated moisture barrier designed to be installed over exisng concrete slabs. The combinaon of the moisture resistant protecve High Impact Polystyrene (HIPS) film, and drainage channels, protect the EPS insulaon and the OSB from absorbing moisture that could originate from the concrete slab. Amdry is compable with virtually any screw down, nail down or floang finish floor.
Transcript of PRODUCT DATA SHEET AMDRY Insulated Subfloor Panel
21 J
AN
UA
RY 2
020
www.amvicsystem.com
BUILD TO A HIGHER STANDARD
501 McNicoll Avenue Toronto, ON, CA, M2H 2E2
Toll Free: 1 (877) 470-9991 • Fax: (416) 759-7402
PRODUCT DATA SHEET AMDRYPR
O02
91
Insulated Subfloor Panel
WARM, DRY, COMFORTABLE
Amvic Advantage
• Panels are installed quickly and easily locked using the 100% recycled polypropylene flexible connectors.
• The hollow core of the connectors allows for expansion of the entire floor assembly that naturally occurs when dry wood is introduced to high humidity areas. This compression joint virtually eliminates buckling or heaving of the floor surface due to excessive expansion.
• The larger panel size is able to accommodate minor irregularities and slopes while, reducing joints, cutting and installation time.
Applications
• Concrete basement floors• Garage or workshop floors• Exercise rooms• Home theaters• Play rooms
Amdry is a Do-It-Yourself (DIY) all-in-one insulated subfloor system with an integrated moisture barrier designed to be installed over existing concrete slabs.
The combination of the moisture resistant protective High Impact Polystyrene (HIPS) film, and drainage channels, protect the EPS insulation and the OSB from absorbing moisture that could originate from the concrete slab.
Amdry is compatible with virtually any screw down, nail down or floating finish floor.
www.amvicsystem.com
BUILD TO A HIGHER STANDARD
PRO
0291
PRODUCT DATA SHEET AMDRY
Physical Properties TableThermalResistance
PanelThickness
CompressiveStrength
FlexuralStrength
FoamDensity
Foam Surface BurningCharacteristics
ASTM D1621
ASTMC203
ASTMD1622
ASTME84
CAN/ULCS102
F.ft2.hr/Btu(m2K/W)
inches(mm)
psi(kPa)
psi(kPa)
lb/ft3
(kg/m3)FlameSpreadIndex (FSI)
SmokeDevelopedIndex (SDI)
FlameSpreadIndex (FSI)
SmokeDevelopedIndex (SDI)
AMD140G1 5.0
(0.88)
1-19/32
(40)
24.6
(170)
60
(414)
1.5
(24)
<75 <450 290 >500
AMD150G1 7.0
(1.23)
2-3/32
(53)
24.6
(170)
60
(414)
1.5
(24)
<75 <450 290 >500
AMD200G1 9.0
(1.58)
2-19/32
(66)
24.6
(170)
60
(414)
1.5
(24)
<75 <450 290 >500
1 Panel size is 24x48” (610x1219mm). Specification for Rigid Polystyrene Insulation is Type II (as per ASTM C578) and Type 2 (as per CAN/ULC-S701).Amdry connectors come in packages of 15. Each connector is 48” (610mm) long and can be easily cut. Each package can connect 10 panels.
See Amdry Installation Guide for detailed installation instructions.
Application: nail downUnderlay recommended (Thermoquiet)
Laminate
Carpet
Vinyl Plank Engineered Hardwood
Tile Solid Hardwood
Application: nail downUnderlay recommended (Thermoquiet)Not suitable for basement applications.
Application: stretch in & direct glue downUnderpad required (Thermoquiet)If panels are not flat, install a single concrete screw in the middle of the panel.
Application: floating & glue downUnderlay recommended (Thermoquiet)Plank thickness 4mm or bigger required.
Application: floating & glue downUnderlay recommended (Thermoquiet)Plank thickness 6mm or bigger required.
Each panel needs to be anchored with two concrete screws 12” from the edges.Requires use of adhesive mortar (thinset cement), 3/4” (19mm) trowel with a minimum clear mortar of 1/2” (13mm).
