Product Data Sheet - Abbeon · CRClarke & Co (UK) Ltd Betws Industrial Park, Ammanford, SA18 2LS,...

2
Product Data Sheet 1210 Vacuum Former Abbeon Cal, Inc., 1363 Donlon Street Unit 1, Ventura, CA 93003-8387 800-922-0977 www.abbeon.com. E-mail: [email protected]

Transcript of Product Data Sheet - Abbeon · CRClarke & Co (UK) Ltd Betws Industrial Park, Ammanford, SA18 2LS,...

Page 1: Product Data Sheet - Abbeon · CRClarke & Co (UK) Ltd Betws Industrial Park, Ammanford, SA18 2LS, UK +44 (0)1269 590530 •info@crclarke.co.uk Our 1210 Vacuum Former has been developed

+44 (0)1269 590530 • www.crclarke.com • [email protected]

Product Data Sheet

1210 Vacuum Former

CR Clarke Data Sheet 1210 Vacuum Former v2.qxp_Brochure by SIGGA Design Ltd. 14/03/2017 1:04 pm Page 1

Abbeon Cal, Inc., 1363 Donlon Street Unit 1, Ventura, CA 93003-8387800-922-0977 www.abbeon.com. E-mail: [email protected]

Page 2: Product Data Sheet - Abbeon · CRClarke & Co (UK) Ltd Betws Industrial Park, Ammanford, SA18 2LS, UK +44 (0)1269 590530 •info@crclarke.co.uk Our 1210 Vacuum Former has been developed

1210 Vacuum Former

Machine Dimensions (mm)

Specifications

Voltage 230V 50-60Hz

Max Current 5.9 Amps

Max. Forming Aperture 204 x 280mm

Sheet Size 228 x 305mm

Maximum Mould Height 100mm

Maximum Material Thickness 6mm

Platen Stroke 115mm

Vacuum (typical) 635mm Hg (-0.86 bar)

Heater System Ceramic

Dimensions (Packed) 930 x 630 x 670mm

Weight (Bare Machine) 41kg

Weight (Packed) 41kg

487

510.8

810

CR Clarke & Co (UK) LtdBetws Industrial Park, Ammanford,

SA18 2LS, UK +44 (0)1269 590530

www.crclarke.com • [email protected]

Our 1210 Vacuum Former has been developed for highperformance, ease of use and low maintenance. Themachine is fitted with a robust diaphragm vacuum pump thatgenerates -0.83 Bar, and also provides a blow release facilityto aid removal of the completed forming. The ceramicheater system heats all thermoplastic materials quickly andevenly. Machines are fitted with our safety interlock systemto prevent taller moulds damaging the heater system, whilethe platen and the heater hood both run on chrome platedslides with nylon bushings for smooth operation. Thematerial seal is custom manufactured from RTV silicone as aone-piece gasket, and the platen seal simply lifts out for easyreplacement.

A stand with shelf and lockable castors is available as anaccessory for the 1210.

CR Clarke Data Sheet 1210 Vacuum Former v2.qxp_Brochure by SIGGA Design Ltd. 14/03/2017 1:04 pm Page 2

Abbeon Cal, Inc., 1363 Donlon Street Unit 1, Ventura, CA 93003-8387

800-922-0977 www.Abbeon.com E-mail: [email protected]