PRODUCT CATALOGUE 2019 · Who are BPC? BPC Ventilation is the leading independent ventilation...
Transcript of PRODUCT CATALOGUE 2019 · Who are BPC? BPC Ventilation is the leading independent ventilation...
Leading home ventilation and central vacuum specialists
www.bpcventilation.comwww.bpcventilation.ie
PRODUCT CATALOGUE 2019
2
CONTENTS• About Us• What is MVHR?• Heat Recovery Units• Heat Recovery Kits
- 01 - Vent-Axia- 02 - Airflow- 03 - Xpelair- 04 - Nuaire- 05 - Domus- 06 – Vortice- 07 – Duco- 08 – Mitsubishi- 09 – Quiet-Vent- 10 – Blauberg
• Commercial Heat Recovery Units- 11 – Mitsubishi- 12 – Caladair- 13 – Vent Axia
• 14 - PIV• 15 - Mechanical Extraction Ventilation• Ducting and Accessories
- 16 - Semi-Rigid- 17 - Dampers- 18 – Fire Solutions- 19 - Solid Rigid- 20 - Thermal- 21 – Flexible- 22 - Air Valves- 23 - Exterior Vents
• 24 - Extractor Fans• 25 - Duct Heaters & Cooler Batteries• Central Vacuum Systems
- 26 - Central Vacuum Units- 27 - Central Vacuum Ducting
Largest stock of Domestic and Commercial MVHR Systems & Accessories available with free mainland delivery on orders above £150.
Designers & Distributors for Leading Ventilation Manufacturers
Who are BPC?BPC Ventilation is the leading independent ventilation company based in the UK and Ireland, specialising in Domestic and Commercial heat recovery and ventilation solutions. BPC can design, supply and if required organise installation of your ventilation system for you!
Sales and DistributionBPC have 1000s of products in stock that are available ready for dispatch to any worldwide location from our distribution centre. You can purchase either through our website or contact our friendly sales team that can help with any query.
Installation ServiceWe can supply ventilation systems in kit form, suitable for any person to install. We can deliver to any worldwide location or provide a full installation service through our large network of locally trained installers throughout the UK and Ireland with knowledge of our products and systems.
Technical SupportOur technical team can provide the best independent technical advice on ventilation solutions you could have during or after your installation is complete.
In-House Design Our dedicated design team can provide a bespoke layout from your plans or drawings with air flow rates and technical guides.
We are here to help you
MVHR and Home Ventilation Solutions
Best Products Best Value Best Service
From a 1 bed house to a 300 bed hotel we can help you
Central Extract (MEV)A central extract unit provides simultaneous, low level extraction from kitchens, bathrooms to a central extract fan typically located in a loft space via a system of ductwork and grilles to control humidity levels. Control can be from fully automatic demand controlled with humidity or Co2 sensors to a speed switch.(Still requires window vents for air supply).
Positive Ventilation (PIV)A loft mounted positive input fan draws fresh air from the atmosphere, filters it and pushes into the dwelling via a ceiling mounted diffuser. All stale air in the property is forced out through the natural forms of ventilation, such as window mounted trickle vents and bathroom extractor fans. (Not suitable for airtight homes).
PIV Units available from £290 + vat
MVHR Units available from £550 + vat
Heat Recovery (MVHR)
A MVHR system is known to be the very best type of home ventilation system by simultaneously extracting poor quality air from the bathrooms and kitchen and supplying fresh filtered air to the bedrooms and living areas plus recovering up to 95% of the normally wasted heat that will lower your energy bills and improve your indoor air quality.
MEV Units available from £190 +vat
Our Professional Kits contain everything you should need to install a highly efficient MVHR system. Please check with your material list as item may vary due to project design etc. Our most popular kit is our premier kit with flexible pipe connectors, additional silencer and pro air valves.
BPC Heat Recovery Kits
7
BPC are the original pioneers of MVHR kits and have many advantages over other suppliers.
8
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
01He
at R
ecov
ery
Units
VENT-AXIA
Vent-Axia have been at the forefront of ventilation systems for over 75 years.
The Vent-Axia Kinetic range is regarded as the leading range of heat recovery system throughout the UK and Ireland for controllability and dependability.
Kinetic Advanced
Next generation of MVHR units with ultra quiet motors andAdvancedoptionsofwifiandAppcontrollability.
All listed units have as standard, summer by-pass, Integral humidity sensor, touch screen controller, left/ right handling through the controller & 5 year warranty.
Contact us! - Website: www.bpcventilation.ie Tel: +353 1526 7452
Mechanical Ventilation Heat Recovery Units
10
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
Advance S 405215 94% 200 0.38 370 125
Advance SX 405216 94% 200 0.38 370 125
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
Kinetic BH 443319 90% 150 0.59 245 125
Kinetic FH 408167 90% 200 0.51 310 125
Kinetic Plus B
443028 91% 260 0.40 425 150
Kinetic Highflow
408449 91% 350 0.52 575 180
Kinetic BH(Cooker Hood)
446759 90% 150 0.59 245 125
Kinetic
Renowned as the leading heat recovery units available for dependability and controllability.
All listed units have as standard, summer by-pass, Integral humidity sensor and space saving horizontal duct option.
Available in both left and right handed versions.
Kinetic Horizontal
Horizontal unit for ceiling mounting
All listed units have as standard, summer by-pass, Integral humidity sensor, digital controller & 5 Year warranty
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Mechanical Ventilation Heat Recovery Units
11
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
200ZH 449540 81% 140 0.69 230 125
200ZPH 407162 86% 140 0.62 230 204x60
Model Part No. % Heat Recovery
Rec Max Size of Room (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
HR100R 370377 70% 40 N/A 43 100
HR100RS 435004 70% 40 N/A 43 100
Single Room MVHR (HR100R/RS)
The HR100R/ RS is ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.
The HR100R features top access and is ideal for loft installations.
The HR100RS features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling.
300ZH 449536 78% 170 0.51 230 150
Kinetic Integra
Description: The Integra Plus heat recovery unit has been specially designed to provide ventilation for flatsorinternalroomsinlargeresidential,commercial,educational or leisure applications. Balanced venti-lation is achieved by using nominal 150mm ducting.
Notes: Horizontal mounted unit ideal for apartments.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Mechanical Ventilation Heat Recovery Units
12
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
Integra 456864 70% 75 N/A 115 100
Integra 437666EC 70% 230 N/A 424 150
Part Number: Various Part Name: G3 Grade Filters
Description: ReplacementfiltersforallrangesofVent-AxiaMVHRsystems.
Notes: Highgradefiltersareavailable,forexamplepollenfiltersforthe seasonal months.
Part Number: 443283 Part Name: Vent-Axia Digital Controller
Description: Vent-Axia Digital Controller is compatible with all Kinetic ranges.
Notes: Also comes with a 15 meter cable.
Part Number: 441865 Part Name: Vent-Axia Wireless Enable Kit
Description: With the Wireless module installed will allow any of the Kinetic range of MVHR to be controlled with the wireless controller.
Notes: The Wireless enable module will allow multiple wireless controllers to connect to one machine.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
02He
at R
ecov
ery
Units
AIRFLOW
Airflow has earned its reputation as a world leader by continuallyproviding innovative, quality products backed by in-built reliability.
Developed by experts in air movement who manufacture to the stringent requirements of ISO9001 and ISO14001.
Basic Range (Duplexvent DV72)
Duplexvent DV72 is a cost effective and environmentally friendly option for small residential buildings and light commercial applications.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Mechanical Ventilation Heat Recovery Units
14
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
DV72 90000566 91% 150 0.60 235 125
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
BV400 90000660 93% 250 0,45 425 160
Basic Range (Duplexvent BV400)
Duplexvent BV400 is a ventilation unit with state-of-the-art technology suitable for medium and large size houses.
This system provides a cost-effective and environmentally friendly option for residential applications.
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
DV96 Adroit
90000576 90% 150 0.92 320 125
DV110 Adroit
90000578 90% 170 0.75 370 160
DV145 Adroit
90000580 90% 350 0.89 542 200
Adroit Range
The Adroit range are ventilation units with state-of-the-art technology. Designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications.
Control your indoor air environment at home or on the go via the Adroit ‘Cloud’ by smart-phone, tablet, or PC.
Horizontal Range
The Duplexvent Horizontal range are highly efficientpassive house approved , side entry mechanical supply and extract ventilation units with heat recovery.
The unit casing is made of high density EPP material which provides significant insulation, eliminates any thermalbridging.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Mechanical Ventilation Heat Recovery Units
15
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
DV250 90000397 90% 130 0.70 230 160
DV400 90000398 90% 170 0.70 230 160
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Mechanical Ventilation Heat Recovery Units
16
Part Number: Various Part Name: G4 Grade Filters
Description: ReplacementfiltersforallrangesofAirflowMVHRSystems.
Notes: Highgradefiltersareavailable,forexamplepollenfiltersforthe seasonal months.
Part Number: 90000610 Part Name: AirflowAdroitDigitalController
Description: The Adroit control panel is a easy to use, with intuitive icons on the coloured display.
Notes: The Adroit Cloud user interface is easy to use with all devices.
Part Number: 9041181 Part Name:AirflowHumiditySensor
Description: This humidity sensor can be placed in areas of high humidity which will trigger a boost mode when humidity rises.
Notes: Compatible with DV96, DV110 and DV145 Models.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
03He
at R
ecov
ery
Units
XPELAIR
With over 55 years of experience in the ventilation industry, there is a guarantee of reliability and quality built into every product. All our products are constantly monitored to ensure we meet all regulations and approvals required for a majority of applications
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Natural Air 180
The Latest and most innovative heat recovery (MVHR) unit from Xpelair with summer bypass, integral humidity sensor and digital controller that is also passive house approved and built to German standards.
Constant volume feature in this unit guarantees that the pre-set air flow rates are achieved independent of anyresistanceintheductsystemorfiltercondition.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Mechanical Ventilation Heat Recovery Units
18
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
Natural Air180 Plus
93333AW 89% 150 0.68 218 125
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
StratumS120Q
92923AW 90% 70 0.69 105 125
StratumS275QVI
92921AW 90% 150 0.69 240 160
Stratum Range
XcellStratumheatrecoveryunitsarecompact,lowprofileand extremely installer-friendly, being much lighter to handle than metal cased units.
They incorporate a high efficiency heat recoverycounterflowcellforheatrecoveryofupto90%,andfeaturehighefficiencyF5G4filtersandcanbebothceilingorloftmounted.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
04He
at R
ecov
ery
Units
NUAIRE
Nuairesystemswillquietlyandefficientlyprovidethehomewithwarmthwhenrequired,andfresh,filteredairallyearround,improvingtheindoorair quality and reducing dust and allergen levels.
MRXBOX
MRXBOX models are designed to provide optimised balanced (supply and extract) mechanical ventilation with heat recovery. Tempered air is delivered into ‘living areas’ whilst extracting moisture laden air from ‘wet’ areas, creating comfortable well ventilated homes. The unit has the facility to commission the supply and extract fans independently on both minimum and maximum speeds. The heat exchanger block can recover up to 95% of the normally wasted heat. Both units are listed on the Product Characteristics Database.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Mechanical Ventilation Heat Recovery Units
20
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
WM1 WM1 92% 80 0.72 120 125
EC03 ECO3 90% 200 0.50 320 150
EC04 ECO4 94% 300 0.62 550 200
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
AB-WM1 AB-WM1 92% 80 0.72 120 125
AB-EC03 AB-EC03 90% 200 0.50 320 150
AB-EC04 AB-EC04 94% 300 0.62 550 200
MRXBOXAB
Alike the MRXBOX models the MRXBOXAB Models are designed to provide optimised balanced (supply and extract) mechanical ventilation with heat recovery however with a summer bypass function.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150 Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
05He
at R
ecov
ery
Units
DOMUS
With over 50 years presence in the UK market, the Domus brand has a well deserved reputation for quality and reliability.
Therangeincludesawardwinning,highperformingandenergyefficientmechanical extract ventilation appliances; available to suit a wide variety of domestic applications and dwelling sizes.
HRXD
Whilst the Silavent HRXD is extremely light in weight, its energyefficientperformancehasn’tbeencompromised.Providing Specific Fan Powers as low as 0.66W/(l/s) andaheatexchangeefficiencyupto86%,theunitwill lowerDwelling Emission Rates for a higher SAP rating. Offering control functions such as frost protection, temperature and humidity control, auto thermal bypass and independent fan speed control, the Blue-brain controller boasts a full complement of air quality and commissioning controls for improved air comfort.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Mechanical Ventilation Heat Recovery Units
22
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
HRXD HRXD 86% 150 0.69 300 125
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
HRX2D HRX2D 94% 250 0.57 410 150
HRX2D
Whilst the HRX2D is easy and quick to install, commission andmaintain,italsoprovidesSpecificFanPowersaslowas0.57W/(l/s)andahighheatexchangeefficiencyupto94%;lowering Dwelling Emission Rates for a higher SAP rating.
Offering control functions such as frost protection, temperature and humidity control, auto thermal bypass and independent fan speed control, the Blue-brain controller boasts a full complement of air quality and commissioning controls for improved air comfort.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150 Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
06He
at R
ecov
ery
Units
VORTICE
Vortice is a European market leader for ventilation systems, covering domestic fans, heat recovery systems and commercial and industrial air handling units.
HR 250 NETI
The Vortice Neti has been developed with the latest technology with contoured internal mouldings that lower airresistanceprovidingaquieterandmoreefficientheatrecovery system designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications.
Suitable for houses sized 100m2.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Mechanical Ventilation Heat Recovery Units
24
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
HR 250 NETI HR 250 NETI 88% 100 0.60 180 125
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
HR 350 AVEL HR 350 AVEL 91% 200 0.60 325 150
HR 350 AVEL
The Vortice HR 350 Avel has been developed with the latest technology with contoured internal mouldings that lower airresistanceprovidingaquieterandmoreefficientheatrecovery system designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications.
Suitable for houses sized 200m2.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
07DUCO
Heat
Rec
over
y Un
its
Duco Ventilation and Sun Control was founded in 1991 and they guarantee to provide a ‘healthy, comfortable and energy-efficient indoor climate in a natural way’.
The company is a leading European manufacturer for natural ventilation and sun protection systems. The systems that Duco manufacture are designed to achieve a healthy indoor air environment without complexity, the health of the user always is always considered the most important.
DucoBox Energy
The DucoBox Energy Heat Recovery unit is the quietest mechanial ventilation heat recovery unit in Europe!
This demand-controlled ventilation unit has a unique integrate 2-zone control allowing you to control day and night zones separately.
The DucoBox Energy is intelligent and energy efficient and has a green A+ energy label.
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
DucoBox Energy
325-1zone 160
Mechanical Ventilation Heat Recovery Units
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
26
DucoBox Energy
325-2zone 160
DucoBox Energy
400-1zone 160
DucoBox Energy
400-2zone 96% 250 0.16 160400
400
325
325
250
200
200
0.16
0.16
0.16
96%
87%
87%
The DucoBox Energy Heat Recovery unit is the quietest mechanical ventilation heat recovery unit in Europe!
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
08MITSUBISHI
Heat
Rec
over
y Un
its Mitsubishi Domestic single room heat recovery units are particularly
suitable for modern homes with high insulation such as double glazing and cavity insulate. These units allow stale air to be removed without major heat loss.
VL100 Range
The wall mounted VL-100 is an efficient single room heat recovery unit that is particularly suited to small offices that require fresh, clean air and the removal of stale air with minimal heat loss.
There are two models available, one model with pull cord control, and the other with field supply external wall switch.
Single Room Heat Recovery Units
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
Flow Rate (m3/h)
Pipe Diameter(mm)
Pull Cord VL100U5-E 80% Single Room 75
Wall Switch VL100EU5-E 80% Single Room 75
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Part Number: P100HF5-E Part Name: Mitsubishi VL100(E)U5-E Filter
Description: Highly efficiency filter (P100HF5-E) for the Mitsubishi single room heat recovery units VL100(E)U5-E and VL100U5-E
28
61 - 106
61 - 106
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
09QUIET-VENT
Heat
Rec
over
y Un
its Quiet-Vent provide Domestic and Commercial Heat Recovery Solutions.The Quiet-Vent range includes heat recovery units and ducting systemsfor many different applications.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
30
Quiet-Vent 150N
Outstanding value horizontally mounted heat recovery units suitable for small apartments and houses requiring extraction from two or three bathrooms and supply into two or three bedrooms or living rooms.
Washable enthalpy heat exchanger exhausts odours and contaminants whilst extracting waste heat and water vapour that can provide up to 85% heat recovery and designed for lifetime use.
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
150N QV-MIA-150N 85% 80 0.8 125
Domestic & Commercial Heat Recovery Units
130
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
10BLAUBERG
Heat
Rec
over
y Un
its
Komfort Ultra D105-A is a single room heat recovery unit with controllable air exchange for creating the best heat comfort in your home. This unit is controlled by an external speed switch to control the units three fan speeds.
Mechanical Ventilation Heat Recovery Units
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
Komfort Ultra D105-A 72% 60 Pending 12550
Blauberg Komfort EC DB
The Blauberg Komfort EC DB heat recovery unit range is suitable for dwellings such as flats, apartments and houses. The unit comes with an S14 control panel.
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
Komfort ECDB EC DB 160 82% 95 pending 140 100
EC DB 250 73% 125 pending 200 125
EC DB 350 85% 190 pending 350 150
Komfort ECDB
Komfort ECDB
32
Komfort Ultra D105-A Single Room Unit
Komfort EC S160
Blauberg Komfort EC S160 is a wall-mounted heat recovery air handling unit suitable for supplying and extracting air in dwellings such as flats, apartments, houses and other buildings. The heat recovery feature minimises heat losses, this controllable air exchange provides the best suitable indoor micro-climate for your home.
Mechanical Ventilation Heat Recovery Units
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
Komfort EC S EC S160 90% 100 Pending 125150
Blauberg Komfort EC SB
Blauberg Komfort EC SB unit range is a wall-mounted heat recovery air handling unit suitable for supplying and extracting air in dwellings such as flats, apartments, houses and other buildings. The heat recovery feature minimises heat loss, this controllable air exchange unit provides the best suitable indoor microclimate for your home.
Model Part No. % Heat Recovery
Rec Max Size of Home (m2)
SFP Flow @ 100pa Pipe Diameter(mm)
Komfort ECSB EC SB 250 85% 160 pending 250 160
EC SB 350 85% 230 pending 375 160
EC SB 550 85% 350 pending 650 200
Komfort ECSB
Komfort ECSB
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
33
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
34
Komfort EC DE
The Blauberg Komfort EC DE horizontal heat recovery unit range is suitable for commercial applications. The unit features an integrated control system with a S11 wall mounted control panel and a sensor display.
Model Part No. % Heat Recovery
SFP Flow @ 150pa Pipe Diameter(mm)
Komfort ECDE EC DE-700-2 90% pending 200
EC DE-1100-3.3 90% pending 250
625
1000
Commercial Heat Recovery Units
Komfort ECDE
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
11MITSUBISHI
Heat
Rec
over
y Un
its Mitsubishi Commercial Lossnay units can be used in many commercial
applications to extract stale air and recovery the heat to warm the incoming fresh air.
Mitsubishi Lossnay LGH RVX-E Range
Heat Recovery unit for commercial applications, with great efficiency and 4-speed controller. This unit horizontally installed unit is constructed of galvanised steel and has up to 86% heat recovery.
Commercial Heat Recovery Units
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Part Number: Various Part Name: Mitsubishi PZ-RFM-E Filter
Description: Highly efficient G3 filter PZ-RFM-E for The Mitsubishi LGH RVX-E commercial heat recovery unit, filters for each individual unit.
Model Part No. % Heat Recovery
SFP Flow @ 100pa Pipe Diameter(mm)
Lossnay LGH15RVX-E 86% 0.7 @100Pa - 130 100
Lossnay LGH25RVX-E 86% 0.47 @100Pa - 210 150
Lossnay LGH35RVX-E 86% 0.46 @200Pa - 260 150
Lossnay LGH50RVX-E 86% 0.34 @200Pa - 180 200
LGH65RVX-E 86% 0.33 @200Pa - 350 200
LGH80RVX-E 86% 0.32 @200Pa - 600 250
LGH100RVX-E 86% 0.30 @200Pa - 850 250
LGH150RVX-E 86% 0.37 @200Pa - 1200 (SA,RA) 250 (OA,EA) 270 x 700
LGH200RVX-E 86% 0.37 @200Pa - 1200 (SA,RA) 250 (OA,EA) 270 x 700
Lossnay
Lossnay
Lossnay
Lossnay
Lossnay
36
12CALADAIR
Heat
Rec
over
y Un
its
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Caladair International have specialised in Heating, Ventilation and Air Conditioning systems (HVAC) since 1979. The company offers Plug and Play products for domestic, commercial and industrial buildings.
The company is situated in Macon, France and they distribute to over 30 countries worldwide. BPC Ventilation are pleased to be a UK distributor for Caladair.
Model Part No. % Heat Recovery
SFP Flow @ 200pa Pipe Diameter(mm)
Neotime 600 90% 500 250
Neotime 900 90% 700 315
Neotime 1300 90% 1000 355
Neotime 1800 90% 1300 400
2500 90% 1900 400Neotime
Neotime
Top Quality horizontal mounted commercial heat recovery unit individually manufactured to suit multiple applications and specifications.
Commercial Heat Recovery Units
n/a
n/a
n/a
n/a
n/a
38
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Carma
The CARMA® range is a PLUG&PLAY and self-regulating dual flow handling unit.
Its static, EUROVENT certified counter-flow exchanger provides with a very high efficiency (90%), in compliance with the European Eco-design Directive.
The CARMA® range is part of the CALADAIR Econological® solution program and improves indoor air quality.
Commercial Heat Recovery Units
Model Part No. % Heat Recovery
SFP Flow @ 200pa Pipe Diameter(mm)
Carma 9008 90% n/a 750 315
Carma 9010 90% n/a 1300 315
Carma 9016 90% n/a 1600 400
Carma 9023 90% n/a 2300 450
9035 90% n/a 4400 500
9048 90% n/a 5600 630
9070 90% n/a 7700 1100 x 500
Carma
Carma
Carma
39
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Freetime
Top quality commercial heat recovery unit, vertically mounted. Each unit is individually manufactured to suit multiple applications and specifications.
The Freetime range is self-regulating dual flow handling unit with MODBUS communication, dedicated to tertiary sector and industrial applications.
Commercial Heat Recovery Units
Model Part No. % Heat Recovery
SFP Flow @ 200pa Pipe Diameter(mm)
Freetime 500 80% 550 200
Freetime 800 80% 750 250
Freetime 1500 80% 1500 315
Freetime 2000 80% 2000 355
2700 80% 2800 400
3500 80% 3300 450
Freetime
Freetime
n/a
n/a
n/a
n/a
n/a
n/a
40
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Silvertop
The Caladair SILVERTOP® range is a compact PLUG & PLAY unit that is self-regulating and highly efficient with heat recovery up to 90%.
Commercial Heat Recovery Units
Model Part No. % Heat Recovery
SFP Flow @ 200pa Pipe Diameter(mm)
Silvertop 06 90% 600 200
Silvertop 08 90% 750 250
Silvertop 15 90% 1500 315
Silvertop 23 90% 2200 400
35 90% 3300 450
52 90% 5000 960 x 405
Silvertop
Silvertop
n/a
n/a
n/a
n/a
n/a
n/a
41
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Hexamotion
Hexamotion are self-regulating and highly efficient heat recovery ventilation units. They are compact units with a high performance providing up to 80% heat recovery and air flow rates of 100-8000 m3/h across the range of 9 different units.
Hexamotion heat recovery units are part of the Caladair Econological solution programme and are manufactured to improve indoor air quality. Hexamotion heat recovery units are monobloc compact with lateral connection, plug & play and communicating heat recovery ventilation unit.
Commercial Heat Recovery Units
Model Part No. % Heat Recovery
SFP Flow @ 200pa Pipe Diameter(mm)
Hexamotion 05 80% 525 200
Hexamotion 08 80% 800 250
Hexamotion 15 80% 1600 355
Hexamotion 20 80% 2100 400
27 80% 3200 450
35 80% 3600 500
45 80% 5300 630
60 80% 6400 630
80 80% 8500 1100 x 606
Hexamotion
Hexamotion
Hexamotion
Hexamotion
Hexamotion
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
42
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Exaeco
Exaeco energy recovery unit provides thermal comfort and optimal treatment of indoor air quality. These self-regulating, highly efficient units are ideal for office and commercial applications.
Exaeco units recover up to 80% of energy and provide new levels of air filtration, air purification, control and optimisation of energy consumption.
Commercial Heat Recovery Units
Model Part No. % Heat Recovery
SFP Flow @ 300pa Pipe Diameter(mm)
Exaeco 10 80% 1110 x 706
Exaeco 13 80% 1310 x 806
Exaeco 17 80% 1560 x 806
Exaeco 22 80% 1770 x 906
Thermover
Top Quality horizontal mounted commercial heat recovery unit individually manufactured to suit multiple applications and specifications
Model Part No. % EnergyRecovery
SFP Flow @ 600pa Pipe Diameter(mm)
Thermover 180S 40% 675 x 395
Thermover 280S 40% 925 x 450
Thermover 400S 40% 495 x 305
Thermover 500S 40% 555 x 295
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a43
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
6000
9000
12000
10000
1500
4400
3400
2000
Part Number: Eventys Part Name: Caladair Eventys Air Handling Unit
Description: Caladair Eventys is a kitchen air supply fan or commercial air handling unit with internal filter and optional electrical or water heaters. Suitable for commercial premises and professional kitchens that require low and average air flows.
Sizes Available: Eventys is available in 11 different models, the range cover flow rates of 100 to 10mmm m3/h. Model sizes includes Eventys 08, 30, 40, 50 & 85.
Part Number: Pyrostar Part Name: Caladair Pyrostar Smoke and Air Handling Unit
Description: Caladair Pyrostar is smoke and air handling unit that is suitable for external and internal applications. The range covers flow rates from 600 to 50000 m3/hr either in impulse turbine version for pressures up to 1500 Pa, or reaction turbine versions for pressure up to 2600 Pa.
Sizes Available: Pyrostar range is available in 5 sizes and 20 models. Model sizes include Pyrostar 4, 6, 10, 12, 15, 20, 25, 30, 40 & 50.
Part Number: Diablo-Twin Part Name: Caladair Diablo Twin Smoke Exhaust Inline Unit
Description: Caladair Diablo twin unit is a smoke extraction unit with back up fan. The Diablo range is designed to extract contaminated air from buildings such as industrial premises, professional kitchens and carparks.
Sizes Available: The diablo range comes in 10 different sizes with a different range of motors. Model sizes include 280, 315, 355, 400, 450, 500, 560, 630, 710 & 800.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Commercial Air Handling Units
44
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
13VENT-AXIA
Heat
Rec
over
y Un
its
Vent-Axia have been at the forefront of ventilation systems for over 75years.
The Vent-Axia Kinetic range is regarded as the leading range of heatrecovery system throughout the UK and Ireland for controllability anddependability.
Totus
Vent Axia Totus D-ERV MVHR unit range for commercial applications.
Totus2 incorporates ‘Sentinel’ high efficiency EC/DC backward curved motors/impellers, Sentinel Demand Controlled ventilation strategies and a market leading high efficiency counterflow heat recovery cell which achieves up to 90% energy recovery. The Energy recovery capabilities are independently tested and rated to EN308.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Commercial Heat Recovery Units
Model Part No. % Heat Recovery
SFP Max Output Pipe Diameter(mm)
Mini Totus-Mini 90% n/a 756 250
Midi Totus-Midi 90% n/a 1000 250
Maxi Totus-Maxi 90% n/a 2000 400
46
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150 Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
14Po
sitiv
e V
entil
atio
nPIV
What is Positive Pressure Ventilation?A positive input pressure ventilation unit (PIV) is a loft or wall mounted unit that pushes fresh filtered air throughout the property to combatcondensation via a ceiling mounted diffuser normally fitted in thehallway.
The units continually introduce a subtle filtered air supply from thetrapped heat and fresh air from your roof void via a ceiling mounted diffuser normally in your hallway and redistributes the heat trapped at ceiling level. The moist, stale air is then forced out of the property through natural ventilation points (window trickle vents).
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Positive Ventilation
Vent-Axia Lo-Carbon Pozidry Compact
Wall Mounted positive ventilation unit from leading manufacture Vent-Axia for controlling condensation and mould in New and existing properties
Wall mounted positive input fan draws fresh air from atmosphere,filtersitandpushesintothedwellingviaawallmounted diffuser. All stale air in the property is forced out through the natural forms of ventilation, such as window mounted trickle vents.
Option available with Heater element.
Vent-Axia Lo-Carbon Pozidry Pro
PoziDry Pro™ improves indoor air quality and quickly eradicates conditions that lead to mould growth, reducing the risk of health issues in the home. The unit is unobtrusive, near silent running and has low operating costs.
Anti-Vibrationlegsofferflexibilitywhenfittingandguaranteesilent running.
Suitable for houses up to 150m2. Option available with Heater element.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
48
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
15M
echa
nica
l Ext
ract
ion
Ven
tilat
ion
MEV
What is Mechanical Extract Ventilation?Mechanical Extract Ventilation (MEV) systems provide continuous ventilation.
Centralised mechanical extract systems also known as a Multipoint and Central Extract System draw moisture-laden air from multiple wet rooms of a property, Essentially the concept is to provide simultaneous, low level extraction from kitchens, bathrooms, shower rooms, utility rooms and toilets to a central extract fan typically located in a loft space or hallway cupboard via a system of ductwork and grilles to control humidity levels.. The extracted air is then normally discharged to outside via a single duct and grille/cowl.
As this type of system has to work 24 hours a day, 7 days a week, 365 days a year, low noise levels and reliability are critical.
Vent-Axia Multivent MVDC-MS / MSH
The Multivent continuous mechanical extract ventilation range is designed for the simultaneous extraction of up to several bathrooms/ Wet Rooms to a centrally positioned unit normally installed in the attic space
The unit has 2 fully variable speeds for trickle and boost. Also available with a built in humidity Sensor (MVDC-MSH).
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Mechanical Extraction Ventilation
Vent Axia Sentinel Multivent / Multivent with Humidity Sensor
The top of the range Sentinel Multivent continuous mechanical extract ventilation range is designed for the simultaneous extraction of up to several bathrooms/ Wet Rooms to a centrally positioned unit normally installed in the attic space
This unit has a integrated digital controller with 100% adjustable speeds for trickle and boost. Also available with Humidity Sensor.
Xpelair Xplus 2EC
Xplus2ECmodelsboastallofthebenefitsthatcentralisedextractionsystems offer – like multiple spigot connections and high-performance extraction–plustheaddedbenefitoflong-life,energy-efficientECmotors with backward curved impellers. This allows these units to be configuredatinstalltomatchtherequiredPartFextractionratesforthe size and layout of the dwelling, ensuring that high-quality indoor air is maintained throughout.
Passivent Demand Controlled IMEV
The Passivent total iMEV fan is perfect for large residential properties which require individual areas to be monitored and ventilated separately, without the need for occupant involvement.
The constant pressure version is designed to be used with humidity-sensitive extracts as part of a Passivent iMEV Total system. Its compact size and range of fixing positions means it can beconcealed within a roof or cupboard space, with one fan serving multiple dwellings.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
50
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
16D
uctin
g an
d A
cces
sorie
sSEMI-RIGID
Radial ducting is the latest innovation on ventilation systems and can provide a quieter andmoreefficientventilationsystemcomparedtorigidductwork.
RadialDuctingisasystemofsmoothborepipeswhicharecrushproof,semiflexiblewithzero air loss. The pipes have an anti-static and antibacterial lining which individually connects each room to a manifold and are available in both circular (75mm or 90mm) andoval(51mmx114mm)fittings.Radicalductingissuitableforanytypeofproperty;including timber framed houses, passive house approval homes and can be used in areas with limited access.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Semi-Rigid
Part Number: QV75PR-Pro Part Name: Quiet-Vent Pro 75mm Round Ducting
Description: 75mm O/D which comes in 50 meter rolls.
Notes: This innovative system uses low resistance ductwork which connect each room to the heat recovery unit via an Air Distribution Box Mix and Match compatibility without any loss of performance.
Part Number: QV90PW Part Name: Quiet-Vent 90mm Round Ducting
Description: 90mm O/D which comes in 50 meter rolls.
Notes: This innovative system uses low resistance ductwork which connect each room to the heat recovery unit via an Air Distribution Box Mix and Match compatibility without any loss of performance.
Part Number: 9041130 Part Name: AirflowAirflex75mmRoundDucting
Description: 75mm O/D which comes in 50 meter rolls.
Notes: Aquickandeasytofitsystemofsemi-rigidductingthatcanresultinupto70% time saving during the on-site installation process, compared to rigid or spiral duct methods.
Part Number: 90000225 Part Name: AirflowAirflexOvalDucting
Description: 51mm x 114mm O/D which comes in 20 meter rolls.
Notes: Low resistance oval ductwork which connects each room to the MVHR unit viaanAirDistributionBox.Mix&MatchcompatibilitywithAirflexPro&Quiet-Ventround 75mm Radial Ductwork with the use of transition pieces.
Part Number: RDD75 Part Name: Domus 75mm Round Ducting
Description: 75mm O/D which comes in 50 meter rolls.
Notes: The next generation of Domus Radial semi-rigid duct systems provide simple, quick and hassle free design and installation which saves time and money, whilst maximising in-situ performance.
Part Number: QV75PB Part Name: Quiet-Vent Semi-Rigid Radial Ducting Pipe
Description: High quality radial round ducting 75mm x 50-meter roll. Ducting is suitable for installation below loft insulation, timber walls, concrete ceilings, concrete floors and cavity walls..
Dimensions: 75mm O/D which comes in 50 meter rolls
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
52
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150 Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Semi-Rigid
Part Number: QV16080MH Part Name: Quiet-Vent 75mm 8 Port Distribution Box
Description: 8 Port Distribution Box with 1 x 160mm self sealing spigot to bottom & 8 x 75mm spigot LHS.
Dimensions: L: 685mm x W: 185mm x H: 175mm Notes: Also available for 90mm radial pipework.
Part Number: QV16064MH Part Name: Quiet-Vent 75mm 10 Port Distribution Box
Description: 10 Port Distribution Box with 1 x 160mm self sealing top or bottom spigot & 6 x 75mm spigot LHS & 4 x 75mm spigot RHS.
Dimensions: L: 520mm x W: 185mm x H: 85mm
Notes: Also available for 90mm radial pipework.
Part Number: QV160104MC Part Name: Quiet-Vent 75mm 14 Port Distribution Box
Description: 14 Port Distribution Box with 1 x 160mm self sealing top or bottom spigot & 10 x 75mm spigot LHS & 4 x 75mm spigot RHS.
Dimensions: L: 850mm x W: 185mm x H: 85mm
Part Number: 90000264 Part Name: AirflowAirflexPro6PortDistributionBox
Description: High Quality galvanised Distribution Box with internal acoustic insulation. Rear 125mm Spigot with 6 vertical or Horizontal 75mm round pipe connections.
Dimensions: L: 530mm x W: 500mm x H: 160mm
Part Number: 90000266 Part Name: AirflowAirflexPro10PortDistributionBox
Description: Rear 160mm Spigot with 10 vertical or Horizontal 75mm round pipe connections.
Dimensions: L: 500mm x W: 500mm x H: 200mm
Notes: Also available for Oval ductwork.
Part Number: 90000269 Part Name: AirflowAirflexPro15PortDistributionBox
Description: Rear 180mm Spigot with 15 vertical or Horizontal 75mm round pipe connections.
Dimensions: L: 500mm x W: 600mm x H: 300mm
53
Part Number: QV12560MC Part Name: Quiet-Vent 75mm 6 Port Distribution Box
Description: 6 Port Distribution Box with 1 x 125mm self sealing top or bottom spigot & 6 x 75mm spigot LHS.
Dimensions: L: 520mm x W: 185mm x H: 85mm
Notes: Ideal for positioning in attic or concrete ceiling.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Part Number: QV75-06150TE Part Name: 6 Point Distribution Box
Description: Metal Distribution Box with 6 x 75mm spigots and 1 x 150mm top
entry spigot with sealing ring.
Dimensions: 600mm x 200mm x 90mm.
Part Number: QV75-10150TE Part Name: 10 Point Top Entry Distribution Box
Description: Metal Distribution Box with 10 x 75mm spigots and 1 x 150mm top entry spigot with sealing ring.
Dimensions: 600mm x 250mm x 90mm.
Part Number: QV75-10150RE Part Name: 10 Point Rear Entry Distribution Box
Description:Metal Distribution Box with 10 x 75mm spigots and 1 x 150mm back entry spigot with sealing ring.
Dimensions: 500mm x 250mm x 200mm.
Part Number: QV75-10150REins Part Name: 10 Point Insulated Distribution Box
Description: Metal Distribution Box with 10 x 75mm spigots and 1 x 150mm back entry spigot with sealing ring. Internally lined with 20mm sound insulation layer.
Dimensions: 500mm x 500mm x 205mm.
Part Number: QV75-15180RE Part Name: 15 Point Distribution Box
Description: Metal Distribution Box with 15 x 75mm spigots and 1 x 180mm back
entry spigot with sealing ring.
Dimensions: 500mm x 350mm x 300mm.
Ducting & Accessories - Semi-Rigid
54
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Semi-Rigid
Part Number: QVPLEN90-Pro Part Name: Quiet-VentPro 75mm90˚Plenum
Description: Used to connect 75mm ducting through the ceiling or wall to the 125mm ceiling Air Valve. Has two 75mm spigots.
Notes: Can be cut down for varying height of ceiling void (Min 100mm - Max 240mm).
Part Number: 90000250 Part Name: AirflowAirflexPro75mm90˚Plenum
Description: Used to connect 75mm ducting through the ceiling or wall to the 125mm ceiling Air Valve. Has two 75mm spigots.
Notes: Can be cut down for varying height of ceiling void (Min 100mm - Max 240mm). Also Available for oval ductwork.
Part Number: 9041141 Part Name: AirflowAirflexProStraightPlenum
Description: Used to connect 75mm ducting through the ceiling or wall to the 125mm Air Valve. 2 x 75mm Spigot for radial ducting and one 125mm Spigot for air valve. Constructed of Galvanised metal.
Notes: Total length is 400mm and can be cut down to 130mm.
Part Number: 9041142 Part Name: AirflowAirflexPro75mm90˚Floor Plenum
Description: Designedtobeplacedinthefloor.2 spigots for 75mm piping and one spigot (nominal diameter 140mm) for Floor Grille (9041174).
Part Number: 9041144 Part Name: AirflowAirflexPro75mm90˚Rectangle Plenum
Description: Used to connect 75mm ducting through the wall to the rectangular aluminium wall Air Valve (9041175). 2 x Spigot for 75mm ducting and 200mm x 50mm opening for Air Valve.
Notes: Adjustable length from 130mm to 270mm. Straight Plenum also available.
Part Number: RDOP-125 Part Name: Domus 75mm90˚Plenum
Description: Plenum consists of 2x 75mm spigot for the 75mm radial pipe (suitable for most makes of radial pipework) 1x 125mm spigot for the Air Valve.
Notes: Amixedflowmodelisalsoavailablewithaninternalflowcontrolallowingfor architectural air valves being used.
55
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Semi-Rigid
Part Number: QVCONS-Pro Part Name: Quiet-Vent Pro 75mm Straight Connector
Description: PVCin-linestraightConnectorfor75mmQuiet-VentandAirflowRadial ducting.
Notes: Excludes ceiling rings (2 sealing rings required for each connector).
Part Number: 9041139 Part Name: AirflowAirflexPro75mm90° Bend
Description: 90°AirflexProCompactBendsuitablefor75mmAirflowand Quiet-Vent radial ducting allows very small bending radius of pipe.
Notes: Excludes ceiling rings (2 sealing rings required for each connector).
Part Number: RDD7590 Part Name: Domus 75mm 90° Bend
Description: Used for very tight bends on most kinds of 75mm radial ducting.
Notes: Excludes ceiling rings (2 sealing rings required for each connector).
56
Part Number: QV75SR-Pro Part Name: Quiet-Vent Pro 75mm Sealing rings
Description: Sealing rings for 75mm round ducting (pack of 10).
Notes: Suitable for most kinds of 75mm radial ducting.
Part Number: QVCON90F Part Name: Semi Rigid Radial 90’ Bend Connector
Description: Used for very tight bends on most kinds of 75mm radial ducting.
Notes: Comes complete with 2 sealing rings and held securely by reusable
locking clips.
Part Number: QVDC Part Name: Quiet-Vent 75mm Ducting Clips
Description: Speci icallydesignedtosecurely ixroundradialducting.Keepsducting off building fabric reducing noise transmission.
Notes: Suitable for most kinds of 75mm radial ducting. Clips can be interconnected.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Semi-Rigid
Part Number: QV75PLEN90 Part Name: Round Ceiling or Wall Plenum
Description: Plenum used for connecting 75mm ducting through the wall or ceiling to connect to a 25mm air valve. Can be cut down for varying heights of ceiling voids (minimum - 100mm, maximum - 240mm).
Notes: Comes complete with 2 pipe holding clips, 1 blank 125mm cover and 2 sealing ring.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Part Number: QVPLEN75ST Part Name: Quiet-Vent Straight Plenum
Description: This straight plenum has 2 x 75mm spigots and 1 x 125mm spigot, it is suitable for connecting 125mm ducting to 2 x 75mm semi rigid ducting.
This plenum is a low-profile ducting solution and saves vital space. It is constructed of minimal components and ensures a quick and easy installation. This plenum comes with 1 x spigot blanking cap.
56
Part Number: 90000352 Part Name: AirflowAirflexPro75mmDuctingClips
Description: Aquickandeasytofit(packof10)ductclipsthatsecurelyfastenAirflexProRoundsemi-rigidducting.Designedtoholdtheductingoffthesurfaceof the fabric of the house, to avoid transferral of noise to the occupants.
Notes: Also available for oval type ductwork.
Part Number: RDCLIP75 Part Name: Domus 75mm Ducting Clips
Description: These75mmclipsarepartof thefixingswhichallowyouto layoutand secure your Radial system in a safe and convenient arrangement.
Part Number: 90000252 Part Name: AirflowAirflexProStraightOvaltoRound
TransitionPiece
Description: Converts 75mm round ducting to 51x114mm Oval ducting.
Notes: Requires 2 x sealing rings with each transition piece.
Part Number: 90000247 Part Name:AirflowAirflexPro90˚ Vertical Elbow
Oval Description: Used for tight vertical bends on 51mm x 114mm oval pipe
Notes: Require 2 x sealing rings per elbow.
17DAMPERS
Duc
ting
and
Acc
esso
ries
Dampers regulate or stop the flow inside an air duct. Our range of dampers are suitable for round duct systems on most ventilation systems and come in a range of sizes.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Dampers
Part Number: FFCD Part Name: Foam Flow Control Damper
Description: The foam flow control is an economical and an easy-to-install foam damper/silencer designed for central ventilation systems with attenuating properties.
Popular models in stock: 125mm, 160mm, 200mm & 250mm
Part Number: QV-MD Part Name: Motorised Circular Damper
Description: 240volt Motorised Circular FD Damper with an automatic springcloser, suitable for connection to a fire alarm or any other power supply.
Popular models in stock: 240volt x 150mm, 240volt x 200mm
Part Number: QV-IRIS Part Name:Iris Circular Duct Damper
Description: Iris Circular Duct Damper is an ideal air flow regulator and measuring device for round ducts. It allows accurate control and a smooth and quiet air flow with reliable measuring results achieved by the special iris construction.
Popular models in stock: 100mm, 125mm & 200mm
Part Number: QV-LRDG Part Name: Spiral Duct Mounted Grille
Description: Spiral duct mounted grilles are designed to fit directly to circular spiral duct without needing special take-off. When using to supply air, the angled hit and miss sliding damper acts as an air deflector as well as a damper.
Popular models in stock: 200mm, 250mm, & 315mm
59
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
18D
uctin
g an
d A
cces
sorie
s
Fire systems are an added safety feature for ventilation systems. Fire valves can be added in place of standard valves. Other fire solutions can be added to round or rectangular pipe to prevent the spread of fire or smoke in the event of a fire. All fire solutions are rated from 2 to 4 hours.
FIRE SOLUTIONS
Part Number: QVDC Part Name: Motorised Circular Fire Damper
Description: 240volt Motorised Circular damper with automatic spring closer suitable for connection to a fire alarm or any other power supply. Fire resistant rockwool to damper blades.
Popular models in stock: 240volt x 125mm, 240volt x 150mm
Part Number: MW Part Name: Metal Fire Protection Supply Air Valve
Description: Fire protection valve suitable for Air Supply
Sizes Available: 100mm, 125mm & 150mm
Part Number: FC204X60 Part Name: Fire Cuff Round Range
Description: The Round Fire Cuff range is an alternative wider solution to prevent the spread of fire by PVC ductwork through concrete walls and floors. Fire Rated for two hours, tested to BS476- 20-22 and SS EN 1366-3.
Sizes Available: 100mm, 125mm & 150mm
Part Number: FW Part Name:Fire Wrap Round Range
Description: Fire wrap is a cost-efficient solution to prevent the spread of fire by the ductwork through concrete walls and floors. Fire rated for 2 hours, tested to BS476- 20-22 and BS EN 1366-3:2009 European standards.
Sizes Available: 100mm, 125mm & 150mm
Part Number: FW Part Name: Fire Wrap Rectangular Range
Description: Rectangular fire wrap is a cost-efficient solution to prevent the spread of fire by the ductwork through concrete walls and floors. Fire rated for 2 hours, tested to BS476- 20-22 and BS EN 1366-3:2009 European standards.
Sizes Available: 204mm x 60mm
Part Number: MW Part Name: Metal Fire Protection Extraction Air Valve
Description: Metal Fire Protection valve suitable for air extraction
Sizes Available: 100mm, 125mm & 150mm
Fire Solutions
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
61
Part Number: QVR204/60 Part Name: Rectangular Fire Collar Range
Description: The Fire Collar range is a popular solution to prevent the spread of fire by plastic ductwork through concrete walls and floors when you can not concrete in a sleeve. Rectangular model has a 30 minute fire rating.
Sizes Available: 204mm x 60mm
Part Number: QVRS Part Name:Round Fire Sleeve Range
Description: The Fire Sleeve range is the most popular solution to prevent the spread of fire by plastic ductwork through concrete and plasterboard walls and floors. All models have a 2 hour fire rating.
Sizes Available: 75mm, 100mm & 130mm
Part Number: QRS Part Name: Rectangular Fire Sleeve Range
Description: The Rectangular Fire Sleeve range is the most popular solution to prevent the spread of fire by plastic ductwork through concrete and plasterboard walls and floors. Fire Rated up to 2 hours.
Sizes Available: 110mm x 54mm, 204mm x 60mm & 220mm x 90mm
Fire Solutions
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
62
Part Number: FC204X60 Part Name: Fire Cuff Rectangular Range
Description: The Rectangular Fire Cuff range is an alternative wider solution to prevent the spread of fire by PVC ductwork through concrete walls and floors. 2 -hour fire rating.
Sizes Available: 204mm x 60mm
Part Number: QVR Part Name: Round Fire Collar Range
Description: The Fire Collar range is a popular solution to prevent the spread of fire by plastic ductwork through concrete walls and floors when you can not concrete in a sleeve
Sizes Available: 80mm, 110mm, 125mm & 160mm
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
19D
uctin
g an
d A
cces
sorie
sSOLID RIGID
Rigid/branched ducting is commonly used and is a cost effective ductwork solution on ventilation systems.
ItisasystemofroundorflatPVCorEPErigidductworkwhicharetypically150mmor125mm which branch out with T-pieces into various rooms. PVC Rigid ductwork has been used for over 50 years in domestic installations.
In larger properties where a large domestic unit is required there is an option for 180mm Spiral ductwork.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Solid-Rigid
Part Number: Various Part Name: PVC Round Pipe
Sizes Available: 100mm, 125mm & 150mm
Lengths Available: 1 Meter, 2 Meters
Notes: Also Available in Metal Galvanised spiral duct.
Part Number: Various Part Name: PVC Round Pipe Bend
Sizes Available: 100mm, 125mm & 150mm
Type Available: 45˚Bend&90˚Bend
Notes: Also Available in Metal Galvanised spiral duct.
Part Number: Various Part Name: PVC Pipe Connector
Sizes Available: 100mm, 125mm & 150mm
Notes: Also available for 204mm x 60mm & 220mm x 90mm PVC Rectangle ducting.
Part Number: Various Part Name: Verplas Thermal Pipe Connector
Sizes Available: 125mm & 160mm
Notes: Also available for 204mm x 60mm & 220mm x 90mm Thermal Rectangle ducting.
Part Number: Various Part Name: PVC Pipe T Piece
Sizes Available: 100mm, 125mm & 150mm
Notes: Also available for 204mm x 60mm & 220mm x 90mm PVC Rectangle ducting.
Part Number: Various Part Name: PVC Pipe Reducer
Sizes Available: 160mm to 150mm 180mm to 150mm 200mm to 100mm 200mm to 150mm
Notes: Also Available in Metal Galvanised spiral duct.
64
Part Number: Various Part Name: PVC Rectangle Pipe
Sizes Available: 110mm x 54mm, 204mm x 60mm & 220mm x 90mm
Lengths Available: 1 Meter, 2 Meters
Notes: Can be used along size round pipe with transitional pieces.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Solid-Rigid
Part Number: Various Part Name: PVC Rectangle Pipe Bend
Sizes Available: 110mm x 54mm, 204mm x 60mm & 220mm x 90mm
Type Available: : 45˚BendVertical& 90˚BendVertical 45˚BendHorizontal& 90˚BendHorizontal
Part Number: Various Part Name: PVC Pipe Transitional Piece
Sizes Available: 110mm x 54mm to 100mm 204mm x 60mm to 125mm 220mm x 90mm to 150mm
Notes: This can be used to link between PVC round pipe and Rectangle pipe.
Part Number: Various Part Name: PVC Rectangle Pipe Elbow Bend (Spigot)
Sizes Available: 110mm x 54mm to 100mm 204mm x 60mm to 125mm 220mm x 90mm to 150mm
Notes: This can be used to link between PVC round pipe and Rectangle pipe.
65
Part Number: Various Part Name: Quiet-Vent Pipe Adaptor
Sizes Available: 125mm to 100mm 150mm to 125mm 150mm to 180mm
Notes: Female to male adaptor which comes in Galvanised steel.
Part Number: Various Part Name: Flexible Rubber Circular Connector
Sizes Available: 100mm, 125mm, 150mm, 180mm & 200mm
Notes: Flexible Rubber Circular Connects are used to neutralise vibrations in round ventilation ducting systems caused by fans, air handing units and other HVAC equipment
20THERMAL
Duc
ting
and
Acc
esso
ries
Thermal ducting is commonly used within the Radial Duct System and is constructed of EPP foam which provides a quality air supply with a high thermal resistance. Thermal ducting is available in round and rectangular versions.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Thermal
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
67
Part Number: Various Part Name: Verplas Thermal Pipe T Piece
Sizes Available: 125mm & 160mm
Notes: Also available for 204mm x 60mm & 220mm x 90mm Thermal Rectangle ducting.
Part Number: Various Part Name: Verplas Thermal Round Pipe
Sizes Available: 125mm & 160mm
Lengths Available: 1 Meter, 2 Meters
Notes: Self-Sealingwithoneclickandlockducttoductfitting.
Part Number: Various Part Name: Verplas Thermal Rectangle Pipe
Sizes Available: 204mm x 60mm & 220mm x 90mm
Lengths Available: 1 Meter, 2 Meters
Notes: Self-Sealingwithoneclickandlockducttoductfitting.
Part Number: Various Part Name: Verplas Thermal Round Pipe Bend
Sizes Available: 125mm & 160mm
Type Available: 45˚Bend&90˚Bend
Notes: Self-Sealingwithoneclickandlockducttoductfitting.
Part Number: Various Part Name: Verplas Thermal Rectangle Pipe Bend
Sizes Available: 204mm x 60mm & 220mm x 90mm
Type Available: 45˚BendVertical& 90˚BendVertical 45˚BendHorizontal& 90˚BendHorizontal
Notes: Self-Sealingwithoneclickandlockducttoductfitting.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
21D
uctin
g an
d A
cces
sorie
sFLEXIBLE
The addition of insulated ducting is essential for pipes carrying air indoors. Semi flexible silencers prevent noise integration in ventilation systems.
Part Number: Various Part Name: Insulated Flexible Ducting
Sizes Available: 102mm, 127mm, 152mm, 182mm & 202mm
Lengths Available: 10 Meters
Notes: Flexible Aluminium inner core with silver foil faces 25mm wool insulation.
Part Number: Various Part Name: Semi Flexible Silencer Range
Sizes Available: 100mm x 500mm, 125mm x 500mm, 150mm x 500mm, 150mm x 600mm & 200mm x 1000mm.
Notes: Thesemiflexibleinsulatedsoundattenuatorscanbeusedinconjunctionwith any ventilation system to help reduce noise ingression.
Ducting & Accessories - Flexible
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
69
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
22D
uctin
g an
d A
cces
sorie
sAIR VALVES
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Air Valve
Part Number: 90000339 Part Name: AirflowPro125mmAirSupplyValve
Descriptions: Our most popular air supply valve. Quick and easy to install.
External Dimensions: 165mm
Notes: Can also operate as an extract valve. Recommended to use on all types of radial systems suitable for 125mm plenums.
Part Number: 90000340 Part Name: AirflowPro125mmAirExtractValve
Description: Our most popular air extract valve. Quick and easy to install.
External Dimensions: 165mm
Notes: Recommended to use on all types of radial systems suitable for 125mm plenums.
Part Number: Various Part Name: PVC Air Valve
Description: Universalcostefficientplasticairvalve.
Sizes Available: 100mm & 125mm
Notes: Can be used for both supply and extract, complete with ceiling collar.
Part Number: Various Part Name: MW Range Metal Supply Valve
Description: Universalcostefficientplasticairvalve
Sizes Available: 100mm, 125mm & 150mm
Notes: Powder coated metal air supply valve. Complete with ceiling collar.
Part Number: Various Part Name: MW Range Metal Extract Valve
Description: Universalcostefficientplasticairvalve
Sizes Available: 100mm, 125mm & 150mm
Notes: Powder coated metal air extract valve. Complete with ceiling collar.
Part Number: 9041168 Part Name: Helios 125mm Acoustic Metal Supply Valve
Description:: Top quality metal and acoustically lined for areas requiring the highest quality sound attenuation.
Notes: Recommended to use on all types of radial systems suitable for 125mm plenums.
71
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Air Valve
Part Number: 9041172 Part Name: Helios 125mm Acoustic Metal Extract Valve
Description:: Top quality metal and acoustically lined for areas requiring the highest quality sound attenuation.
Notes: Recommended to use on all types of radial systems suitable for 125mm plenums.
Part Number: Various Part Name: MW Range Fire Rated Metal Supply Valve
Description: Fire rated metal supply valves.
Sizes Available: 100mm, 125mm & 150mm
Notes: Valve will close when temperature reaches 72 degrees sealing the duct fromfireandsmokeingress.
Part Number: Various Part Name: MW Range Fire Rated Metal Extract Valve
Description: Fire rated metal Extract valves.
Sizes Available: 100mm, 125mm & 150mm
Notes: Valve will close when temperature reaches 72 degrees sealing the duct fromfireandsmokeingress.
Part Number: Various Part Name: Universal Stainless Steel Air Valve
Description: UniversalAirvalvewithastainlesssteelfinish.
Sizes Available: 100mm, 125mm & 150mm
Notes: Can be used for both supply and extract.
Part Number: 9041175 Part Name: AirflowAluminiumWallAirValve
Internal Dimensions: 200mm x 50mm External Dimensions: 250mm x 100mm
Notes: Forusewithairflowwallplenums9041143&9041144,Canalsobeusedwith204mmx60mmflatduct.Air volume can be controlled via horizontal and vertical fins.
Part Number: 9041174 Part Name: AirflowFloorGrille
Description: Floor grille from satin stainless steel.
Sizes Available: 100mm, 125mm & 150mm
Notes: Air volume adjustable via setting disc, compatible with Floor outlet (9041142)
72
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Air Valve
Part Number: A141 Part Name: Passivent Humidity Controlled Extract Valve
Descriptions: Humidity Controlled Extract Grille is designed for ‘wet rooms’ and responds automatically to changes in humidity, opening to meet demand. Works with most central mechanical extract systems to reduce heat loss and save energy.
Notes: PIR controlled version also available (A141PIR)
Part Number: Various Part Name: Frankische Starline Shape Circle/ Shape Compact
Description: The round shapes and exceptional glass design of Shape Compact and Shape Circle give the extravagant living sensation a discreet yet striking touch.
Finish Available: Glass, White pure
Part Number: Various Part Name: Frankische Starline Line Compact
Description: The square COMPACT Line are an ideal addition to every interior design. Whether as a visual highlight or discreetly integrated – COMPACT always leaves a lasting impression.
Finish Available: Ground stainless steel & White
Part Number: Various Part Name: Frankische Starline Pyramid Compact
Description: The square COMPACT Pyramid are an ideal addition to every interior design. Whether as a visual highlight or discreetly integrated – COMPACT always leaves a lasting impression.
Finish Available: Dark rust bronze & White
Part Number: Various Part Name: Frankische Starline Flora Compact
Description: The square COMPACT Flora are an ideal addition to every interior design. Whether as a visual highlight or discreetly integrated – COMPACT always leaves a lasting impression.
Finish Available: Anthracite & White
Part Number: Various Part Name: Frankische Starline Avantgarde Compact
Description: The square COMPACT Avantgarde are an ideal addition to every interior design. Whether as a visual highlight or discreetly integrated – COMPACT always leaves a lasting impression.
Finish Available: Ground stainless steel & White
73
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
23D
uctin
g an
d A
cces
sorie
sEXTERIOR VENTS
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Ducting & Accessories - Exterior Vents
Part Number: Various Part Name: Stainless Steel Louvred Cowl
Descriptions: RoundCowlwithLouvresandfinemeshsuitableforgreaterweather protection and when aesthetic appeal is necessary.
Sizes Available: 100mm, 125mm, 150mm & 180mm
Part Number: Various Part Name: PVC Louvred Grille
Descriptions: Louvred grille Suitableforductingtoexternalwallorsoffit(withoutfinemesh).
Sizes Available: 100mm, 125mm & 150mm
Finish Available: White, Black & Brown
Part Number: RVTUBLACK Part Name: Universal 20k Tile Roof Vent
Description: Suitable for most types of concrete tiles. Suitable for heat recovery and other ventilation systems using up to 150mm ducting from MVHR unit.
20,000mm2/m(20k)ofairflow
Finish: Gray/ Black
Part Number: RVSVBLACK Part Name: Universal 20k Slate Roof Vent
Description: Suitable for 600X300MM and 500x250 Natural and Fibre Slates. Suitable for heat recovery and other ventilation systems using up to 150mm ducting from MVHR unit.
20,000mm2/m(20k)ofairflow
Finish: Gray/ Black
Part Number: Various Part Name: Vent-Axia Flat Roof Cowl
Description: Complete weather protection with bird guard. Suitable for both air supply and air extract. Constructed from galvanised steel epoxy.
Sizes Available: 125mm -160mm & 200mm - 250mm
Notes: Recommended to be used with a lead apron.
Part Number: 78300175 Part Name: Frankische Universal Insulated Roof Vent Terminal
Description: This is a professional roof terminal for 180mm pipework manufactured in Germany and is the only one we are aware off suitable for heat recovery systems requiring up 25000mm2 using 180mm or 200 pipework.
Notes: Comes supplied with 180mm ISO and 160mm ISO pipe connections. Must be used witheithertheflatrooforpitchedroodleadapron(additionalcost).
75
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Extra
ctor
Fan
s & D
-MEV
A decentralised Mechanical Extract Ventilation (d-MEV) system is a low energy, continuous mechanical extract ventilation system designed to replace conventional bathroom fans and draw moisture laden air out of the wet rooms (bathrooms and utility)providingaquieterandmoreefficientsystemcomparedtoseparatefans.
Usually installed in the bathroom wall or ceiling in replacement of the conventional fan extracting continuously at a normal low ventilation rate stale polluted air.
24 EXTRACTOR FANS
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Extractor Fans & D-MEV
Part Number: 443310 Part Name: Vent-Axia Tempra T
Descriptions: Single room heat recovery unit suitable for Kitchen, Bathrooms, Toilet or Utility rooms. Fits in a 100mm diameter hole for fast installation.
Notes: This unit has a Timer operation.
Part Number: 443311 Part Name: Vent-Axia Tempra HTP
Descriptions: Single room heat recovery unit suitable for Kitchen, Bathrooms, Toilet or Utility rooms. Fits in a 100mm diameter hole for fast installation.
Notes: This unit has integral humidity sensor , Timer operation and Pull-cord
Part Number: 443312 Part Name: Vent-Axia Tempra P
Descriptions: Single room heat recovery unit suitable for Kitchen, Bathrooms, Toilet or Utility rooms. Fits in a 100mm diameter hole for fast installation.
Notes: This unit has Pull-cord operation
Part Number: Various Part Name: Vent-Axia Quadra Kitchen/ Bathroom Range
Description: The Lo-Carbon Quadra offers a single fan suitable for surface or flushmounting. It is also one of the most unobtrusive centrifugal kitchen fans available. The front cover design also provides no area for dirt to build up so it stays looking better for longer.
Types Available: Timer/ Pull-cord, Timer/ PIR and Humidistat/ Timer/ Pull-cord
Part Number: Various Part Name: Vent-Axia Lo-Carbon Solo Plus
Description: The Lo-Carbon Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms.
Types Available: Pull-cord, Timer, Humidistat/ Timer, Timer/PIR
Part Number: Various Part Name: Vent-Axia Lo-Carbon VA100
Description: The improved Vent-Axia Lo-Carbon VA100 range features Lo-Carbon long lifeDCmotorsthataremoreefficientthanconventionalmotorswhilstdeliveringupto87%energy savings.
Types Available: Pull-cord (LP), Shutter/ Pull-cord (XP), Timer (LT), Shutter/ Timer (XT) Humidity/ Timer/ Pull-cord (LHTP) & Shutter/ Humidity/ Pull-cord/ Timer (XHTP)
77
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150 Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Extractor Fans & D-MEV
Part Number: Various Part Name: Xpelair VX Range
Description: Acostefficientrangeofeasytoinstall,slimprofile,singlespeedextractfans.
IPX4 rating suitable for a wide range of applications including bathrooms, shower rooms and toilets including zones 1 and 2.
Types Available: A timer option in available.
Part Number: Various Part Name: Xpelair Simply Silent DX100BTR
Description: The Quality Simply Silent DX100 Bathroom extract fan features Ghost Air Movement Technology for quiet running. For use with an external switch or sensor. Is typically connected to the room lighting circuit. Fan continues to work after the fan is switched off.
The Integral over-run timer is adjustable at installation from 30 seconds to 30 minutes.
Part Number: Various Part Name: Xpelair Simply Silent Contour C4
Description: The Simply Silent™ Contour range effectively eliminates humidity,conden-sation and odour to improve air quality in bathrooms, shower rooms,cloakrooms and toi-lets. They use advanced Ghost™ Air Movement Technology to deliver near-silent running. Suitableforwall,ceiling,panelandwindowfitting.
Types Available: Square and Circle, Also Available in Timer and Humidistat.
Part Number: Various Part Name: Xpelair Contour CV4
Description: The Simply Silent™ Contour CV range has been designed to offer excep-tionally low noise levels, while delivering a constant volume of extracted air to eliminate humidity, condensation and mould growth in bathrooms, shower rooms, cloakrooms, toilets and kitchens.
Types Available: Square and Circle.
Part Number: 93086AW Part Name: Xpelair Simply Silent Shower Fan
Description: Combining low noise levels with high extraction power, Simply Silent™ Shower Fans are purpose-designed for in-shower installation. Complete with installation kit.
Types Available: For use with an external switch or sensor. Is typically connected to the room lighting circuit. Fan continues to work after the fan is switched off.
Part Number: 93087AW Part Name: Xpelair Simply Silent Shower Fan With Light
Description: Combining low noise levels with high extraction power, Simply Silent™ Shower Fans are purpose-designed for in-shower installation. Complete with LED light and installation kit.
Types Available: For use with an external switch or sensor. Is typically connected to the room lighting circuit. Fan continues to work after the fan is switched off.
78
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Extractor Fans & D-MEV
Part Number: Various Part Name: Xpelair XIMX Mixed Flow Fan range
Descriptions: In-line duct systems have grown in popularity as a method of con-cealed ducted ventilation over the past two decades.
These practical, reliable fans are ideal for ducted applications in domestic and small commercial installation. Range Description Available in four sizes, the XIMXrangeofplasticmixedflowunitsoffersdutiesforawiderangeofductedapplications.
Types Available: Models Available with timer.
Sizes Available: 100mm, 150mm & 200mm
Notes: All models come complete with a convenient mounting cradle which makes installation or subsequent inspection simple. The terminal box is easily accessible, simplifying the electrical connection.
The timer models have an adjustable overrun timer from 2 to 30 minutes.
Part Number: Various Part Name: XID Centrifugal Metal In-line Fan Range
Descriptions: In-line duct systems have grown in popularity as a method of concealed ducted ventilation over the past two decades. The Xpelair XID in-line range is engineered for trouble-free operation delivered complete with adjusta-ble mounting brackets and terminal box
The XID in-line range is manufactured in zinc-coated, corrosion-resistant sheet metal with 30mm long spigot connections for ease of connection to ductwork.
Sizes Available: 100mm, 150mm & 200mm
Notes: Thefanunitisspeedcontrollablewithadditionalcontrollertoofferflexibilityand individual control, and are supplied with a universal mounting bracket for mounting at any angle. The compact and robust zintec steel construction is Class F insulation.
The fans are suitable for use in ambient temperatures ranging from -30ºC to +50ºC.
The fan is fully speed controllable using the XIC1 speed controller.
79
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Commercial Extractor Fans
Part Number: DXPL Part Name: Domus D Series Ceiling PL Fan
Descriptions: Ceiling Fan from the new Light Commercial range of D series fans from Domus Ventilation, the full fan range is available for windows, roof and ceiling installation and suits many different applications.
Sizes Available: 6 Inch, 9 inch & 12 Inch
Part Number: WX-WL Part Name: Domus D Series Wall WL Fan
Descriptions: Domus D Series Wall Fan from the new Light Commercial range of D series fans from Domus Ventilation. The full range is available for windows, roof and ceiling installation and suits many different applications.
Sizes Available: 6 Inch, 9 inch & 12 Inch
Part Number: DX-FR Part Name: Domus D Series Flat Roof FR Fan
Description: Domus D Series Flat Roof fans from the new Light Commercial range of D series fans from Domus Ventilation, the fan range is available for windows, roof and ceiling installation and suits many different applications.
Sizes Available: 6 Inch, 9 inch & 12 Inch
Part Number: DX-PR Part Name: Domus D Sereis Pitched Roof PR Fan
Description: Pitched Roof fan from the new Light Commercial range of D series fans from Domus Ventilation, the fan range is available for windows, roof and ceiling installation and suits many different applications.
Sizes Available: 6 Inch, 9 inch & 12 Inch
Part Number: DX-WW Part Name: Domus D Series Window WW Fan
Description: Window Fan from the new Light Commercial range of D series fans from Domus Ventilation, the fan range is available for windows, roof and ceiling installation and suits many different applications.
Sizes Available: 6 Inch, 9 inch & 12 Inch
Part Number: DX Part Name: Domus D Series Basic Fan Unit - DX
Description: Window Fan from the new Light Commercial range of D series fans from Domus Ventilation, the fan range is available for windows, roof and ceiling installation and suits many different applications.
Sizes Available: 6 Inch, 9 inch & 12 Inch
80
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Part Number: Ecoblue Part Name: Caladair Ecoblue C/P Extract Box Fan
Description: Caladair Ecoblue Constant Pressure box fan is suitable for air extraction in commercial buildings that require low and average flow rates.
Sizes Available: Ecoblue 600, 1000 & 1800
Part Number: Econizer Part Name: Caladair Econizer Extract Box Fan
Description: Caladair Econizer Exhaust fan unit is suitable for air extraction in Commercial buildings that require low and average flow rates. Fitted with an EC motor, this unit fulfils ErP 2009/125/EC requirements.
Sizes Available: Econizer 600, 1000, 1800, 3000 & 5000
Part Number: Minimax Part Name: Caladair Minimax Compact Box Fan
Description: Caladair Minimax box fan is economical 3 speed box fan that is intended for extract or air supply ventilation to domestic or commercial buildings.This fan unit is compact and particularly suited to applications where there are height restraints or acoustic requirement
Sizes Available: Minimax 125, 160, 200, 250, 315, 316, 355 & 400
Part Number: Miniblue Part Name: Caladair Miniblue Compact Box Fan
Description: Caladair Miniblue is a very efficient unit with variable set speed or constant pressure control internal box fan that is intended for extract or air supply ventilation to domestic or commercial buildings. This unit is particularly suited to applications where there are dimensional constraints or acoustic requirements, as well as very low consumption.
Sizes Available: Miniblue 125, 160, 200, 250, 315, 355 & 400
Commerical Extract Box Fans
Part Number: Combibox Part Name: Caladair Combibox CBH Modular Box Fan
Description: Caladair Combibox is a low consumption modular air handling unit that can be connected to any one or more Combibox Filters, Electric heaters, LPHW, LPCW and DX battery’s allowing for a comprehensive modular air handling unit or simply used on there own.
Sizes Available: Combibox CBH 4, 5, 6, 7, 8 & 9
81
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150 Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
25D
uct H
eate
rs &
Coo
ler B
atte
ries
DUCT HEATERS &COOLER BATTERIES
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Duct Heaters & Cooler Batteries
Part Number: Various Part Name: Circular Electric Duct Heater
Descriptions: Twin overheating protection, easy to use screw terminals, Rubber sealed ductwork connections. Can be installed both horizontally and vertically. Stainless steel heating element with Aluzink Casing. Power output from 0.6kw to 6kw.
Sizes Available: 100mm, 125mm, 160mm, 200mm & 250mm
Part Number: Various Part Name: Circular Electric Post Duct Heater
Descriptions: Professionalcompleteunitwithwallmountedtemperaturesensor,airflowsensor and internal temperature sensor. Suitable for use as a controllable post heater that will increase the air temperature to the rooms, The temperature set point is controlled by a surface wall mounted controller.
Sizes Available: 100mm, 125mm, 160mm, 200mm & 250mm
Part Number: Various Part Name: Circular Electric Pre Duct Heater
Descriptions: Suitable for use as a controllable pre heater that will increase the air temperature to the ventilation unit to prevent any frost build up and to increase the returned air temperature, The temperature set point is controlled by a turn dial on the heater.
Sizes Available: 100mm, 125mm, 160mm, 200mm & 250mm
Part Number: Various Part Name: Hot Water Duct Heater Range
Description: Uses hot water as the energy carrier and is used for heating the ventilation air in a ventilation system. Can also be used for heating individual rooms or zones. In correctly designed systems, they can also heat the entire building.
Sizes Available: 100mm, 125mm, 160mm & 200mm
Part Number: Various Part Name: Cold Water Duct Cooler Range
Description: Uses cold water supplied from your exiting heat pump and is used for cooling the ventilation air in a ventilation system. Can also be used for cooling individual rooms or zones.
Sizes Available: 125mm, 160mm & 200mm
Part Number: Various Part Name: AirflowGeothermalHeatExchanger
Description: A Brine Geothermal heat exchanger or Ground - Water Heat Exchange uses a network of pipes that are laid underground, typically at a depth of 1.5m to 2m and are designedtoenhancetheefficiencyofaHeatRecoverysystem.
83
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Cen
tral V
acuu
m Sy
stem
s
26 VACUUM SYSTEMS
A central vacuum system is the most powerful, healthiest and most convenient way to vacuum your home.
With a central vacuum, there is no clumsy vacuum to carry, just insert a lightweight, crushproof hose into a convenient inlet point and vacuum quietly around your home.
The vacuum unit is located away from your living areas in the garage or the utility room to provide a quiet environment and is operated by a switch on the handle.
BPC are distributors for Sach Central Vacuum systems that supply one of the most technically advanced central vacuum units available at renowned value for money prices.
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Central Vacuum Systems - Vacuum Systems
Part Number: Various Part Name: Sach Digital Vacuum Range
Descriptions: Central vacuum units using the most up-to-date technology. Combining innovation and effectiveness, they offer the power and performance to meet all your cleaning requirements. A top quality central vacuum unit with advanced features of a digital control panel and remote display panel,variable speed Slow Start motor that allows you to control the power at the hose handle.
Sizes Available: 1.6w, 1.8w & 2.4w
Notes: Comes with a 10 piece 8 meter hose kit.
Part Number: Various Part Name: Sach Dynamic Vacuum Range
Descriptions: Dynamic model combines simplicity and effectiveness in a reliable high quality central vacuum unit. Suitable for medium or large homes. Practical and easy to-operate, the perfect central vacuum for daily home cleaning.
Sizes Available: 1.6w, 1.8w & 2.4w
Notes: Comes with a 10 piece 8 meter hose kit.
Part Number: Various Part Name: Sach Eco Mini Vacuum
Descriptions: EcoMini incorporatesathree-stagefiltrationsystemcomprising:cycloniccone,antibacterialfilterandafilterdisctoprotectthemotor;theprotectionprovidedensures maximum longevity for the motor.
Theunitincludesabuilt-inmufflertominimizenoise-levelsandanLEDdisplaywhichpro-vides information on minimum maintenance requirements of the unit. Its high performance andfreshdesignmakeEcoMinia feasiblecompleteoptionformedium-sizedflatsandapartments or it can be used as a stand alone in the garage.
Part Number: Various Part Name: Sach Integra
Descriptions: Itisthenewandrevolutionarycentralvacuumforapartmentsandflats.Itcan be installed under or inside a kitchen cabinet or on a linen cupboard, broom cup-board or anywhere else its convenient. The dust is collected in an easily accessible bag located inside the drawer. Integra Vac is compact yet powerful and virtually silent, pro-viding a highly practical and innovative centralized vacuum system solution for even the smallest of spaces.
85
Central Vacuum Systems - Hide a Hose
Part Number: Hide a Hose Retractable Kit Part Name: hide-a-hose-kit
Descriptions: A central vacuum system combined with Hide-A-Hose creates the perfect combination of power and convenience and with the Hide-A-Hose central vacuum system you will never need to carry or store bulky vacuum hoses. Simply pull out the amount of hose you need from the inlet valve, connect your cleaning wand (with attachment) and begin vacuuming.
Part Number: Sachvac Cleaning Kit for Retractable Hose System Part Name: XTK3001-SC
Descriptions: This kit includes the following: Retractable Hose Handle, Aluminium Telescopic Wand, Hard floor tool with hose hair fill 30cm, Combination Tool with felt pad, Upholstery Tool, Crevice Tool, Wall wand holder, Dust brush,Wand tools holder, Tool caddy bag.
Part Number: XT1008/22-SC/U Part Name: Sachvac 22.5' F-F Long Elbow
Descriptions: Female to female 22.5 degree bend
This fitting is suitable for Sachvac Hide a Hose Vacuum System
Part Number: XT1007-SC/U
Part Name: Sachvac Connector Between Hose & Handle
Descriptions: Connector between Hose & Handle
For use with the Sachvac Hide a Hose system
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
86
Part Number: XT1008/45-SC/U Part Name: Sachvac 45' F-F Long Elbow
Descriptions: Female to female 45 degree long elbow bend
Suitable for use in the Sachvac Hide a Hose vacuum system
Part Number: XT1008/90-SC/U Part Name: Sachvac 90' F-F Long Elbow
Descriptions: Female to female 90 degree long elbow bend
This fitting is suitable for Sachvac Hide a Hose Vacuum System
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Central Vacuum Systems - Hide a Hose
Part Number: XT1006-SC/U
Part Name: Sachvac Hose End Cap
Descriptions: Hose End Cap for hide a hose
Part Number: VXT1009/8-SC Part Name: Sachvac Retractable Hose with Hose Sock
Descriptions: Retractable hose with hose sock
Suitable for the hide a hose system
This product comes in four sizes: 8 meter, 10 meter, 12 meter and 15 meter
Part Number: XT1005-SC Part Name: Sachvac Retractable Hose without Hose Sock
Descriptions: Retractable hose without hose sock for use with the Hide a Hose System
This product comes in four sizes: 8 meter, 10 meter, 12 meter and 15 meter
Part Number: XT1004-SC/U Part Name: Sachvac Retractable Hose Handle
Descriptions: Standalone vacuum handle that can be used as a replacement or spare handle
Easily retractable and ergonomic usage
87
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Cen
tral V
acuu
m Sy
stem
sDUCTING &27
ACCESSORIES
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Central Vacuum Systems - Ducting and Accessories
Part Number: Various Part Name: 52mm PVC Pipe
Descriptions: PVC Pipe (1.5 Meters) Quality 52mm PVC pipe suitable for all central vacuum systems a pallet quantity or 320 pipes is also available.
Part Number: Various Part Name: 52mm 90˚Sweep Elbow
Descriptions: 51mm PVC sweep elbow. Used in all vacuum systems. Box quantity available. Female to female connection.
Part Number: Various Part Name: 52mm 90˚ Short Elbow
Descriptions: Used to connect to mounting plates and very tight areas. We recommendthataminimumnumberofthesebendsareusedasflowmayberestricted. Female to female connection.
Part Number: Various Part Name: 52mm 45˚Short Elbow
Descriptions: 51mm diameter. Suitable for all central vacuum systems. Available in female to female connection and male to female connection.
Part Number: Various Part Name: 52mm Stop Coupling
Descriptions: For connecting the 52mm vacuum pipe. Female to female connections. Box quantity are also available.
Part Number: Various Part Name: 52mm T Piece Single Wye
Descriptions: 52mm diameter suitable for all central vacuum pipework. Female to female connection.
89
Central Vacuum Systems - Ducting and Accessories
Part Number: Various Part Name: 52mm Double Wye
Descriptions: Female-Female Double Wye. 52mm Diameter. Suitable for all central vacuum systems. Female to female connection.
Part Number: Various Part Name: 52mm 90˚Sweep Tee
Descriptions: 52mm sweep valve that allows PVC ducting for Vacuum system to veer off into 2 different directions. Female to female connections.
Part Number: Various Part Name: Exhaust Vent
Descriptions: Used for wall mounting the external exhaust pipe.
Colours Available: White, Ivory and Black.
Part Number: Various Part Name: Mounting Plate & 90˚Elbow
Descriptions: Used to connect the ductwork to the inlet valve. Suitable with the use of all our inlet valve ranges. Suitable for both concrete and timber walls
Available in box quantity.
Part Number: Various Part Name: Electric Conduit With 2 x 0.5mm Cable
Descriptions: Used for low voltage switch on inlet valves and can be buried in concrete if required.
Available in 25 and 50 meter length
Part Number: Various Part Name: Design Inlet Valve
Descriptions: Coloured inlet valve for vacuum system.
Colours Available: Silver & White
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
90
Contact us! - Website: www.bpcventilation.com - Tel: 028 2827 5150
Central Vacuum Systems - Ducting and Accessories
Part Number: Various Part Name: Sweep Inlet (Pan)
Descriptions: Installed normally in the kitchen plinth and operated by a foot switch. Simply push the sweep inlet with your foot to start and sweep up. External Dimensions - 215mm x 100mm x 53mm. Cut out dimensions 170mm long x 40mm high. Connection Kit Requited.
Colours Available: Silver & White
Part Number: Various Part Name: Sweep Inlet Connection Kit
Descriptions: For connecting Sweep inlet (pan) to ductwork. Sweep Inlet (Pan) not included.
Part Number: Various Part Name: Garage Hose Reel
Descriptions: 11 meter hose with automatic operation. Wall mounted. Compatible withrangeofpopularfittings.
Part Number: Various Part Name: Sach ON/Off Plus Hose Kit
Descriptions: The Sach ON/Off Plus hose with a variable speed control on handle Suitable for most types and makes of central vacuum systems with variable speed motor capability. Both the handle and the cuff have 360` rotation for easy kink free operation.
Thequality10piecekitcomescompletewith:8meterprofessionalhose,Combinationfloortool, Hard Floor brush, Dust Brush, Telescopic wand, Upholstery Tool, Tool holder, Crevice tool, Hose hanger & Tool Caddy bag.
Types Available: 8 Meter, 10 meter and 12 meter.
Part Number: Various Part Name: Sach ON/Off Hose Kit
Descriptions: The Sach ON/Off hose with a on/off speed control on handle. Suitable for most types and makes of central vacuum systems. Both the handle and the cuff have 360` rotation for easy kink free operation
Thequality10piecekitcomescompletewith:8meterprofessionalhose,Combinationfloortool, Hard Floor brush, Dust Brush, Telescopic wand, Upholstery Tool, Tool holder, Crevice tool, Hose hanger & Tool Caddy bag.
Types Available: 8 Meter, 10 meter and 12 meter.
91
New Products Available Soon!
90
Designers & Distributors for Leading Ventilation Manufacturers
93
Largest stock of Domestic and Commercial MVHR Systems &Accessories available with free mainland delivery on orders above £200
Contact Us
Head Office• Sales• Dispatch• Enquiries• Technical Support
Tel: 028 2827 5150E-Mail: [email protected]
Regional Offices
London Tel: 020 33259 074
Dublin Tel: +353 1526 7452
Visit our websitewww.bpcventilation.comwww.bpcventilation.ie
Visit our showroomBPC Ventilation
8 Redlands RoadLarne, Co. Antrim
Northern IrelandBT40 1AX