Product Catalog (PDF) - RTF Systems

efficient custom outdoor kitchens and fire features

rtfsystems™

easy, fast, efficient custom projects

The rtf systems™ product line was designed and engineered to be the easiest, fastest, and most efficient system on the market

for building custom outdoor kitchens and fire features. Our outdoor kitchen cabinets and fire features take the place of traditional

concrete block construction, with out limiting you to set designs, configurations, or finishing materials. In fact, when using the rtf

systems™ products, your design options are limitless. Our modular products can be configured into any shape or size, will accept

any brand of appliances and storage accessories, and can be finished with any veneer and countertop material.

As former landscape/hardscape contractors, we understand that efficiency on the job site is the only driver of profitability, which is

why we designed our products to get you in and out of the backyard easier and faster than you would with concrete block or any

other system on the market - saving you labor, saving you time, and adding productions days to your schedule!

An added benefit to the rtf systems™ products is the usability of the finished project. All of our appliance cabinets include an

interior floor system, which helps prevent the contents from getting wet, and the storage capacity of our cabinets is significantly

greater than a outdoor kitchen built with concrete block. Both of these features add to the overall usability and enjoyment of the

finished project.

rtf systems™ products are built to last. All of our cabinets are framed with structural galvanized steel, and then covered with a

revolutionary magnesium oxide (MgO) board. Both the steel and the MgO board are environmentally friendly, have exceptional

strength, will not grow mold or mildew, are not affected by freeze/thaw cycles, and are class A fire rated, giving you peace of mind

knowing that your products will last - and we even back it up with a limited lifetime residential warranty.

rtf systems™

Veneer & Countertops

Installed

Appliances Installed

rtf systems vs. concrete block time line

step 1: Product Delivery step 4: Finishing Materialsstep 2: Product Assembly step 3: Appliance Cutouts

Day 1 Day 2 Day 3 Day 4

Materials In Backyard

Cabinets/CMU Assembled, Cutout, & Ready for Veneer

Veneer & Countertops

Installed

Appliances Installed

Day 5 Day 6

rtf systems concrete block

Project Start

2

outdoor kitchen cabinets & accessories

The rtf systems™ outdoor kitchen cabinets are a set of modular components designed to lock together to create any size and any

shape custom outdoor kitchen. While the height (36 inches) and depth (29 inches) of each cabinet is the same, the width ranges

from 6 inches wide to 72 inches wide, in 6 inch increments.

The appliance and refrigeration cabinets (designated with “-AC or “-RC” at the end of the product number) are the core of the

product line. These cabinets range from 18 inches wide to 72 inches wide and feature an adjustable frame system that allows you

to configure the cabinets for any brand and any size appliance and storage accessory. Each appliance and refrigeration cabinet

also includes an integrated floor system for keeping stored contents above the patio floor and away from water runoff under the

outdoor kitchen.

Filler cabinets (designated with “-FC” at the end of the product number) are 6 inches and 12 inches wide. The filler cabinets serve

to fill in space in “gaps” in the overall design and to add additional countertop space where needed. Also included in the product

line are corner cabinets (designated with “-CC” at the end of the product number), specialty cabinets for kamado style smokers

(designated with “-KC” at the end of the product number) and power burners (designated with “-PB” at the end of the product

number).

Additionally, each cabinet size has a corresponding bar and backsplash accessory (designated with “-BAR” and “-BKSP” at the

end of the product numbers). Other accessories include corbels for supporting the bar components or solid-surface bar tops, and

countertop extensions for creating an overhang when using tile for the countertop material.

4

(888) 340.4342 | rtfsystems.net

outdoor kitchen cabinets & accessories

RTF6-29-FC (Filler Cabinet) RTF12-29-FC (Filler Cabinet) RTF18-29-AC (Appliance Cabinet)

RTF30-29-AC (Appliance Cabinet) RTF36-29-PB (Power Burner Cabinet)RTF36-29-AC (Appliance Cabinet) or -RC (Refrigeration Cabinet)

RTF48-29-AC (Appliance Cabinet) RTF48-29-KC (Kamado Cabinet) RTF54-29-AC (Appliance Cabinet)

RTF66-29-AC (Appliance Cabinet) RTF90c-29-CC (Corner Cabinet)

RTF24-29-AC (Appliance Cabinet)



RTF72-29-AC (Appliance Cabinet) or -AC/RC (Combo Cabinet)

RTF45c-29-CC (Corner Cabinet) (Sold AS Pair)

rtf systems™

6(888) 340.4342 | rtfsystems.net

RTF90c-29-CC-RND (Corner Cabinet) RTF-EndCap-RND (End Cap) RTF(Cabinet Width)-BAR (Bar)RTF(Cabinet Width)-BKSP (Backsplash)

1 Adjustable appliance frame (included with every Appliance Cabinet, Refrigeration Cabinet, & Power Burner Cabinet).

2Adjustable storage accessory frame (included with every Appliance Cabinet, Refrigeration Cabinet, Kamado Cabinet, & Power Burner Cabinet).

3 Floor system (included with every Appliance Cabinet, & Refrigeration Cabinet).

4 “V” notches for connecting multiple cabinets and running utili-ties through the outdoor kitchen (included with every cabinet).

5 Leveling feet allowing for up to 3 1/2” of leveling adjustment (included with every cabinet).

6 1” x 1” 16 ga. structural galvanized steel tubing frame system (included with every cabinet)

7 1/2” class A fire rated Magnesium Oxide (MgO) backer board panels (included with every cabinet).

5

3

2

2

1

1

4

6

7

Cabinet Main Components


RTF45c-29-CC (Corner Cabinet) (Sold AS Pair)

1a Portion of original cabinet frame that gets removed during cutout for appliance.

1a


outdoor kitchen cabinet & accessory specifications

Part Number: Description: Common Use: Width: Height: Depth: Gross Weight:Maximum

Appliance Width:Maximum Storage Accessory Width:

Includes Floor System:

Includes Leveling Feet:

Includes Stainless Steel Vent: Finish:

RTF6-29-FC Outdoor kitchen filler cabinet Additional counter space and/or fill in gap between appliance cabinet and wall 6 in. 36 in. 29 in. 46 lbs. - - - - - - no yes no unfinished


RTF18-29-AC Outdoor kitchen appliance cabinet Small slide-in or drop-in appliance with door/drawers storage accessory 18 in. 36 in. 29 in. 86 lbs. 15 in. 15 in. yes yes yes unfinished



RTF36-29-AC Outdoor kitchen appliance cabinet Medium slide-in or drop-in appliance with door/drawers storage accessory 36 in. 36 in. 29 in. 138 lbs. 33 in. 33 in. yes yes yes unfinished

RTF36-29-RC Outdoor kitchen refrigeration cabinet Outdoor refrigerator, ice maker, wine chiller, or kegerator 36 in. 36 in. 29 in. 132 lbs. 33 in. 33 in. yes yes yes unfinished

RTF36-29-PB Outdoor kitchen power burner cabinet Slide-in or drop-in power burner with designed to sit lower than countertop level 36 in. 36 in. 29 in. 140 lbs. 24 in. 24 in. no yes no unfinished



RTF48-29-KC Outdoor kitchen kamado cabinet Kamado style ceramic smoker with large drawer storage accessory 48 in. 36 in. 29 in. 154 lbs. 28 in. 28 in. no yes no unfinished

RTF54-29-AC Outdoor kitchen appliance cabinet Medium-large slide-in or drop-in appliance with door/drawers storage accessory 54 in. 36 in. 29 in. 176 lbs. 51 in. 51 in. yes yes yes unfinished




RTF72-29-AC/RC-Combo Outdoor kitchen appliance & refrigeration cabinet Small-medium slide-in appliance with storage accessory & refrigerator 72 in. 36 in. 29 in. 222 lbs. 33 in. 33 in. yes yes yes unfinished

RTF90c-29-CC 90 deg. outdoor kitchen corner cabinet Corner cabinet for “L” shaped kitchens with square corner 29 in. 36 in. 29 in. 90 lbs. - - - - - - no yes no unfinished

RTF90c-29-CC-RND 90 deg. outdoor kitchen corner cabinet Corner cabinet for “L” shaped kitchens with rounded corner 29 in. 36 in. 29 in. 110 lbs. - - - - - - no yes no unfinished

RTF45c-29-CC 45 deg. outdoor kitchen corner cabinets (pair) Corner cabinet for “L” or “V” shaped kitchens with angled corner 22 in. (each) 36 in. 29 in. 46 lbs. - - - - - - no yes no unfinished

RTF-EndCap-RND Outdoor kitchen cabinet end cap Rounded end on outdoor kitchen 15 in. 36 in. 29 in. 88 lbs. - - - - - - no yes no unfinished

RTF(Cabinet Width)-BAR Raised backsplash with cantilevered bar (cabinet specific) Bar with tiled top or other materials needing sub-base (used with corbel supports) cabinet width 7 in. 14 in. (top) 12 in. (overhang)

10 lbs. per linear ft.

- - - - - - - - - - - - - - - unfinished

RTF(Cabinet Width)-BKSP Raised backsplash (cabinet specific) Backsplash only or bar with solid surface materials (used with corbel supports) cabinet width 7 in. 2 in. 3.5 lbs.per linear ft.

- - - - - - - - - - - - - - - unfinished

RTF-Corbels Decorative iron bar supports (pair) Support for cantilevered bar or solid-surface bar materials 11 in. 8.75 in. 1.5 in. 8 lbs. - - - - - - - - - - - - - - - rust powdercoat

WEDI-Overhang High-density foam countertop overhang support Tiled countertop overhang support 48 in. 2 in. 4 in. 1 lb. - - - - - - - - - - - - - - - unfinished

WEDI-Adhesive Urethane adhesive for WEDI-Overhang (10.5 oz tube) Securing countertop overhang support pieces - - - - - - - - - 1 lb. - - - - - - - - - - - - - - - - - -

rtf systems™

8(888) 340.4342 | rtfsystems.net

Part Number: Description: Common Use: Width: Height: Depth: Gross Weight:Maximum

Appliance Width:Maximum Storage Accessory Width:

Includes Floor System:

Includes Leveling Feet:

Includes Stainless Steel Vent: Finish:







RTF36-29-RC Outdoor kitchen refrigeration cabinet Outdoor refrigerator, ice maker, wine chiller, or kegerator 36 in. 36 in. 29 in. 132 lbs. 33 in. 33 in. yes yes yes unfinished

RTF36-29-PB Outdoor kitchen power burner cabinet Slide-in or drop-in power burner with designed to sit lower than countertop level 36 in. 36 in. 29 in. 140 lbs. 24 in. 24 in. no yes no unfinished



RTF48-29-KC Outdoor kitchen kamado cabinet Kamado style ceramic smoker with large drawer storage accessory 48 in. 36 in. 29 in. 154 lbs. 28 in. 28 in. no yes no unfinished





RTF72-29-AC/RC-Combo Outdoor kitchen appliance & refrigeration cabinet Small-medium slide-in appliance with storage accessory & refrigerator 72 in. 36 in. 29 in. 222 lbs. 33 in. 33 in. yes yes yes unfinished

RTF90c-29-CC 90 deg. outdoor kitchen corner cabinet Corner cabinet for “L” shaped kitchens with square corner 29 in. 36 in. 29 in. 90 lbs. - - - - - - no yes no unfinished

RTF90c-29-CC-RND 90 deg. outdoor kitchen corner cabinet Corner cabinet for “L” shaped kitchens with rounded corner 29 in. 36 in. 29 in. 110 lbs. - - - - - - no yes no unfinished

RTF45c-29-CC 45 deg. outdoor kitchen corner cabinets (pair) Corner cabinet for “L” or “V” shaped kitchens with angled corner 22 in. (each) 36 in. 29 in. 46 lbs. - - - - - - no yes no unfinished

RTF-EndCap-RND Outdoor kitchen cabinet end cap Rounded end on outdoor kitchen 15 in. 36 in. 29 in. 88 lbs. - - - - - - no yes no unfinished

RTF(Cabinet Width)-BAR Raised backsplash with cantilevered bar (cabinet specific) Bar with tiled top or other materials needing sub-base (used with corbel supports) cabinet width 7 in. 14 in. (top) 12 in. (overhang)

10 lbs. per linear ft.

- - - - - - - - - - - - - - - unfinished

RTF(Cabinet Width)-BKSP Raised backsplash (cabinet specific) Backsplash only or bar with solid surface materials (used with corbel supports) cabinet width 7 in. 2 in. 3.5 lbs.per linear ft.

- - - - - - - - - - - - - - - unfinished

RTF-Corbels Decorative iron bar supports (pair) Support for cantilevered bar or solid-surface bar materials 11 in. 8.75 in. 1.5 in. 8 lbs. - - - - - - - - - - - - - - - rust powdercoat

WEDI-Overhang High-density foam countertop overhang support Tiled countertop overhang support 48 in. 2 in. 4 in. 1 lb. - - - - - - - - - - - - - - - unfinished

WEDI-Adhesive Urethane adhesive for WEDI-Overhang (10.5 oz tube) Securing countertop overhang support pieces - - - - - - - - - 1 lb. - - - - - - - - - - - - - - - - - -

fire features & accessories

The rtf systems™ fire feature products include a collection of fire pits, as well as fireplaces, each with various shapes and sizes to

accommodate just about any project.

The fire pit products feature round, square, linear and bar table style fire pits and come complete with the gas burner system

(burner, burner pan, high-capacity key valve, flex line, fittings for both natural gas and liquid propane, and push-button ignition).

The round, square, and linear fire pits are a standard 18 inches tall, with diameters, widths, and lengths ranging from 36 inches to

72 inches, depending on the shape. The bar table style fire pit has a standard 29 inch x 29 inch base designed to connect to our

outdoor kitchen cabinets, and a choice of either a 48 inch or 60 inch diameter top with a total height of 43 inches.

The fireplace products are available in a traditional style with a wood-burning stainless insert (42 inches or 36 inches wide), dou-

ble-walled flue pipe, and termination cap; as well as a more contemporary, linear fireplace with a vent-free gas-burning insert.

Additionally, the traditional style fireplace has optional accessories such as chimney extensions, and wood storage boxes.

Included in our line of fire pit and fireplace products, are a variety of burn media options, such as fire glass, lava rock, and log

sets, which will add the final touch to your project and make it a true work of art.

10


fire pits & accessories

RTF-FPkit-RND RTF-FPkit-LINRTF-FPkit-SQR RTF-FPkit-BAR

1 Round, high-temp powder coated burner pan with stainless steel “spur” burner, natural gas & liquid propane orifice.

2High-capacity key valve with chrome valve cover and key, and stainless steel flex line.

3 Battery-operated push button ignition (includes AA battery).

4 Stainless steel air vents (2 included)

5 Leveling feet allowing for up to 3 1/2” of leveling adjustment.

6 1” x 1” 16 ga. structural galvanized steel tubing frame system.

7 1/2” class A fire rated Magnesium Oxide (MgO) backer board panels.

1

2

3

4

5

6

7

RTF-FPkit-TankTable

Fire Pit Main Components

rtf systems™

12(888) 340.4342 | rtfsystems.net

fire pit specifications

Part Number: Description: Width: Height: Depth:Gross

Weight:Includes

Leveling Feet: BTU’s/Hour** Finish:

RTF-FPkit-RND36 36” Diameter round outdoor gas fire pit with burner kit* 36 in. dia. 18 in. - - - 150 lbs. yes 36,000 unfinished




RTF-FPkit-SQR36 36” Square outdoor gas fire pit with burner kit* 36 in. 18 in. 36 in. 150 lbs. yes 36,000 unfinished




RTF-FPkit-LIN42 42” Wide linear outdoor gas fire pit with burner kit* 42 in. 18 in. 18 in. 147 lbs. yes 45,000 unfinished




RTF-FPkit-TankTable 18” Wide x 18” Deep x 24” Tall Propane Tank Holder 18 in. 24 in 18 in. 65 lbs. yes N/A unfinished

RTF-FPkit-BAR48 48” Diameter (top) bar table style outdoor gas fire pit with burner kit*

48 in. dia. (top)29 in. (base)

43 in. - - -29 in. (base)

348 lbs. yes 100,000 unfinished

RTF-FPkit-BAR60 60” Diameter (top) bar table style outdoor gas fire pit with burner kit*

60 in. dia.29 in. (base)

43 in. - - -29 in. (base)

373 lbs. yes 100,000 unfinished

* Fire pit burner kits include the following components:

36” diameter round and 36” square fire pits include 16” diameter black, high-temp powder coated burner pan, stainless steel spoke burner, high-capacity key valve, connection hoses, push-button spark ignition with enclosure, stainless steel igniter cover plate, batteries, and orifices for both natural gas and liquid propane (LP).

42” - 60” diameter round, 42” - 60” square, and bar table style fire pits include 25” diameter black, high-temp powder coated burner pan, stainless steel spoke burner, high-capacity key valve, connection hoses, push-button spark ignition with enclosure, stainless steel igniter cover plate, batteries, and orifices for both natural gas and liquid propane (LP).

Linear fire pits include stainless steel burner pan, stainless steel tube burner, high-capacity key valve, connection hoses, push-button spark ignition with enclosure, stainless steel igniter cover plate, batteries, and orifices for both natural gas and liquid propane (LP).

** BTU’s/Hour listings are based on 7.0”WC for Natural Gas and 11.0”WC for Liquid Propane (LP) at the burner orifice. Flex line size and proper gas pipe sizing will also affect BTU’s/Hour. As a result your BTU’s/Hour may vary slightly from specifications.


fireplace, accessories, & specifications

Part Number: Description: Width: Height: Depth: Gross Weight:Includes

Leveling Feet: Finish:

RTF-FPLkit-36 36” Traditional wood burning fireplace with insert kit* 72 in 120 in. 36 in. 698 lbs. no unfinished

RTF-FPLkit-42 42” Traditional wood burning fireplace with insert kit* 72 in 120 in. 36 in. 706 lbs. no unfinished

RTF-FPLkit-AWB Arched-top wood storage boxes for traditional fireplace 22.5 in. 42 in. 25 in. 132 lbs. no unfinished

RTF-FPLkit-SWB Straight-top wood storage boxes for traditional fireplace 22.5 in. 42 in. 25 in. 118 lbs. no unfinished

RTF-FPLkit-EXT Chimney extension for traditional fireplace 23 in. 18 in. 25 in. 48 lbs. no unfinished

* Traditional fireplace insert kits include the following components:

Either 36” or 42” wide stainless steel wood-burning fireplace insert with refractory firebrick panels, double-walled chimney flue pipe, spark arresting termination cap, and storm collar trim kit for flue pipe.

RTF-FPLkit (shown with RTF-FPLkit-AWB in Dark Gray)

RTF-FPLkit-SWB

RTF-FPLkit-SWB

rtf systems™

14(888) 340.4342 | rtfsystems.net

fireplace, accessories, & specifications

1Either 36” or 42” wide stainless steel wood-burning fireplace insert with refractory firebrick panels & knock-out for optional gas line installation.

2 Double-walled chimney flue pipe.

3 Spark arresting termination cap with storm collar trim kit for flue pipe.

4

5

1” x 1” 16 ga. structural galvanized steel tubing frame system.

1/2” class A fire rated Magnesium Oxide (MgO) backer board panels.

1

2

3

4

5 Traditional Fireplace Main Components

outdoor kitchen design ideas

When it comes to designing your outdoor living space, the possibilities are truly endless, and with rtf systems™, creating a unique

environment is easier than ever before. However, there are some basic principles to follow to ensure that your space not only

ends up functional, but also flows with the style of the home and backyard, and not like an afterthought:

• size the outdoor kitchen and/or fire feature to be proportional with the size of your patio.

• use veneer materials that either match or complement your home or patio area, and avoid

introducing a veneer not elsewhere present.

• if designing an outdoor kitchen away from your back door, be sure to include conveniences such

as refrigerators, bar centers, side burners, and warming drawers to reduce the number of trips you

have to make to your indoor kitchen.

• include plenty of space for storage accessories, such as doors, drawers, trash can pullouts, and pa-

per towel doors.

• don’t forget to design your appliance layout for plenty of counter area, especially on either side of

the grill and side burner. This comes in handy for food prep, as well as when its time to take food

off of the grill.

The following design ideas are common layouts that you can use to inspire your custom outdoor living space. You can use them

as-is and add in your veneer materials and countertops, add or remove elements, or create your own design. For help with cus-

tomizing these designs or creating something completely different, contact us at (888) 340-4342 or [email protected].

17

“L” shaped outdoor kitchen design with 90• corner


rtf systems™ Cabinets:

Legend: Qty.: Part Number:

1 RTF72-29-AC/RC Combo

1 RTF90c-29-CC

2 RTF36-29-AC

1* RTF90c-BKSP or RTF90c-BAR

2* RTF36-BKSP or RTF36-BAR

not shown 2* RTF-Corbels (Pair)

1

2 3 4

5 6 7

1

2

3 4

5

6 7

Finishing Materials:

Qty.: Type:

120 Sq. Ft. Veneer Material

44 Sq. Ft. Countertop Material

5 Sq. Ft.* Backsplash Material

13.5 Sq. Ft.* Bar-top Material

Appliances:

Qty.: Item:

1 Gas Grill

1 Refrigerator

1 Side Burner

1 Sink

1 Door/Drawer Combo

1 Trash Can Pullout

1 Single Door* Optional

* Optional

Finishing materials quantities are estimates only and provided for illustration purposes only. The quantities listed will vary based on the type of material chosen and should be verified prior to ordering.

“L” shaped outdoor kitchen design with 45• corner

19(888) 340.4342 | rtfsystems.net



1 RTF48-29-AC

1 RTF24-29-AC

1 RTF45c-29-CC

1 RTF36-29-RC

1 RTF36-29-AC






1

2

3

4

5

67

1

2

3

4

5

6

7


Qty.: Type:




27 Sq. Ft.* Bar-top Material

Appliances:

Qty.: Item:

1 Gas Grill

1 Refrigerator

1 Side Burner

1 Sink

1 Door/Drawer Combo

1 Trash Can Pullout

1 Single Door

* Optional

* Optional

3

7

8

9

10

8

9

10Finishing materials quantities are estimates only and provided for illustration purposes only. The quantities listed will vary based on the type of material chosen and should be verified prior to ordering.

rtf systems

“U” shaped outdoor kitchen design


1

2 3 4 5

6

7


Qty.: Type:





Appliances:

Qty.: Item:

1 Gas Grill

1 Refrigerator

1 Side Burner

1 Sink

1 Door/Drawer Combo

1 Trash Can Pullout

1 Single Door

1 Double Drawers

1 Kamado Smoker

* Optional


8 9 10 11




2 RTF90c-29-CC

2 RTF36-29-AC

1 RTF24-29-AC

1 RTF48-29-KC




1

2

3 4

5

6

7

* Optional

8

9 10

11

“straight” outdoor kitchen design

21(888) 340.4342 | rtfsystems.net




1 RTF48-29-AC




1 2

3 4

1

2

3

4


Qty.: Type:





Appliances:

Qty.: Item:

1 Gas Grill

1 Refrigerator

1 Bar Center with Sink

1 Door/Drawer Combo

1 Door/Trash Can Pullout Combo* Optional

* Optional


rtf systems

fire pit designs


1

2


Qty.: Type:




rtf systems™ Fire Pit:


1 RTF-FPkit-RND481

1



1 RTF-FPkit-LIN60

1 RTF-FPkit-TankTable


Qty.: Type:

20 Sq. Ft. Veneer Material (Fire Pit)

11 Sq. Ft. Countertop Material (Fire Pit)

12 Sq. Ft. Veneer Material (Tank Table)

4 Sq. Ft. Countertop Material (Tank Table)

1

2

fireplace designs

23(888) 340.4342 | rtfsystems.net

1

2


rtf systems

2



1 RTF-FPLkit-42

1 RTF-FPLkit-SWB


Qty.: Type:

116 Sq. Ft. Veneer Material (Fireplace)

12 Sq. Ft. Hearthtop/Cap Material (Fireplace)

66 Sq. Ft. Veneer Material (Wood Boxes)

22 Sq. Ft. Hearthtop/Cap Material (Wood Boxes)

1

2Finishing Materials:

Qty.: Type:


12 Sq. Ft. Hearthtop/Cap Material



1 RTF-FPLkit-421

1

1942 IH 35 South, Sui te 101, San Marcos, Texas 78666 | (888) 340.4342 ph. (888) 733.2593 fx . | r t fsystems.net

™rtfsystems

easy, fast , and eff ic ient products for bu i ld ing custom outdoor l iv ing spaces

Product Catalog (PDF) - RTF Systems

Documents

Transcript of Product Catalog (PDF) - RTF Systems