Pro Rod Brochure

7/29/2019 Pro Rod Brochure

1/9


2/9


3/9


4/9

Coiled Sucker Rod is manufactured as one piec e wi th only two couplings; one at the top a nd

one at t he bottom. The side load is spread over the entire l ength of the rod string, virtually

eliminat ing holes in tubing.

Pro-Rod's coiled sucker rod is ideal for:

deviated, slant or directional well s to reduce rod/tubing wear

vertical wells wit h high operational speeds to reduce rod/tubing wear

high viscosity and/or sand production to eliminat e f low restricti on past couplings

wells wit h small tubular requiring larger diameter rod

thermal wells eliminating rod fall


5/9

Pro-Rod is manufact ured from micro-alloyed, modified hot rolled carbon or alloy steel. Coiled sucker

rod is available in diameters of 13/16 (20.6 mm), 7/ 8 (22. 2 mm), 1 (25. 4 mm) & 1 1/8 (28. 6 mm) and

in steel grades of 1536M (Carbon), 4120M (Chromium-M olybdenum) & 4330M (Nickel - Chromium-

Molybdenum).

Raw coils are uncoiled, straightened and welded together using a butt- fusion process. Pro-Rod then

uses high temperature induction furnaces to Quench & Temper the steel. This heat t reatment process

coupled with the metal s chemical c omposition, produces the nec essary hardness, toughness, corrosion

properties, metal strength, microstructure and tensile strength that is optimal for continuous coiled

rod in artifi cial li ft systems. The rod is then coated with an oil soluble coati ng which protects it from

atmospheric c orrosion in storage. Pin end connections are welde d on to the end of the rods using a

butt-fusion process. The rod is then coiled onto transport reels ready for installation. Quality control

inspections are preformed and recorded at ea ch step of the manufact uring process.


6/9


7/9


8/9

The X-celerator is the key to Pro-Rod's success.

It wa s originally designed as a service rig assist

unit but has now evolved into an a ll purpose coiled rod handling

system. C-Tech Design and M anufact uring designs and builds the

units in-house making c ustomization e asy. Currently our units are

manufactured in the following configurations:

Service Rig mounted

Rapid Rod Service Unit (Flush-by rig)

Truck mounted

Trailer mounted

Skid mounted

The X-celerator can run and pull coiled rod as

fast as 35 meters per minute. This unit alone

has changed the landscape of coiled rod service f orever.

What is the Fireblade?

We took the principles of electric flash-butt welding and applied it

to a proprietary, gas fire d system that produces equal results. The

result to the end user is an extremely portable and cost effective

welding system known as the Fireblade, which further reduces time

and expense on location. This ec onomic portable w elding system ca n

be used for all of your field wel ding requirements.


9/9

Pro Rod Brochure

Documents

Transcript of Pro Rod Brochure