PRISMS AND CUBES · STANDARD INSERTATION ALUMINIUM PRISMS STANDARD INSERTATION MAGNESIUM PRISMS...

8
PRISMS AND CUBES Shaker‘s ancillary equipment CENTROTECNICA S.r.l.

Transcript of PRISMS AND CUBES · STANDARD INSERTATION ALUMINIUM PRISMS STANDARD INSERTATION MAGNESIUM PRISMS...

Page 1: PRISMS AND CUBES · STANDARD INSERTATION ALUMINIUM PRISMS STANDARD INSERTATION MAGNESIUM PRISMS ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N INSERT M8 OPTIONS DELIV. WKS.

PRISMS AND CUBESShaker‘s ancillary equipment

CENTROTECNICA S.r.l.

Page 2: PRISMS AND CUBES · STANDARD INSERTATION ALUMINIUM PRISMS STANDARD INSERTATION MAGNESIUM PRISMS ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N INSERT M8 OPTIONS DELIV. WKS.

Almost all vibration tests should be performed along 3 orthogonal axes. The axis can be moved by rotating the item on a slip-table, on a prism or on a cube.

Our experience in vibration tests suggests that other structures like L an T fixtures in most of cases alter vibra-tion test by unwanted resonances.

PRISM

The prism can be considered as a substitute of the slip table. Two opposite faces with the same inserts pattern can be used to test the items. The prism can be used to perform the in-plane (horizontal) axis whi-le the out-of-plane (vertical) axis has to be performed fixing the items directly on the shaker armature or on an expander.

Main features:

Light structure 2 opposite faces to be used together High resonance frequencies if the loads on the two faces are well balanced.

CUBE

5 faces can be used to fix many items on a cube. The possibility to perform a test along 3 orthogonal axis without removing it is the main advantage of a cube. A three axis test on three different items can be per-formed by running the profile three times instead of nine if an L fixture is used. Main features:

Internally caved to save weight Save time using 5 faces High frequency range up to 335mm

Cube

Prism

WHY A PRISM? WHY A CUBE?

ManufacturingCubes and prisms are machined from solid or casted:

CASTED Several standard patterns are used to cast in aluminium or magnesium alloy the larger cubes and prisms.

MACHINED Smaller cubes and prisms can be machined from solid aluminium or magnesium alloy.

Page 3: PRISMS AND CUBES · STANDARD INSERTATION ALUMINIUM PRISMS STANDARD INSERTATION MAGNESIUM PRISMS ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N INSERT M8 OPTIONS DELIV. WKS.

TOP HAT WASHERS

Prism or Cube

Top Hat Washer

TRANSVERSAL MODE SHAPE The transversal mode shape is excited only in case of unbalanced payloads (for instance if an item is mounted on a face and the opposite face is free). Balancing the payload on prisms and cubes increase the usable frequency range and preserves shaker internal guidance system.

TORSIONAL MODE SHAPE The torsional mode is negligibly excited by the shaker

AXIAL MODE SHAPE: FIRST RESONANCE The axial mode shape is always excited by the shaker and causes the prism main resonance.This mode shape usually presents a high frequency thanks to the high axial stiffness of the material. Up to a dimension of 440 mm the main resonance is over 2000 Hz.

Stainless steel Top-Hat-Washers are forced into the fixing holes. This feature prevents deformations of the material due to the fixing screws.

When installed, the use of washers is not necessary.

To help the operator to choose proper fixing screws length, a drawing is included it the technical report.

This is a standard feature on casted items.

MODES

OPTIONS

CUBES AND PRISM CAN BE FULLY CUSTOMIZED UPON REQUEST!

All prisms have three main vibration mode shapes:

Page 4: PRISMS AND CUBES · STANDARD INSERTATION ALUMINIUM PRISMS STANDARD INSERTATION MAGNESIUM PRISMS ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N INSERT M8 OPTIONS DELIV. WKS.

CUBES AND PRISM SAMPLES

525x445x245 mm magnesium prism with dow17 treatment - Application in aerospoce industry

485x486x343 mm magnesium prims- Application in telecoms industry

330x330 mm prism available in aluminium and magnesium

Page 5: PRISMS AND CUBES · STANDARD INSERTATION ALUMINIUM PRISMS STANDARD INSERTATION MAGNESIUM PRISMS ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N INSERT M8 OPTIONS DELIV. WKS.

Rendering of a 335 mm cube for 440 armaturewith 120 M8 inserts on 100 grid pattern

335 mm cube for 440 armature with 176 M8 inserts on 50 grid pattern

485x486x343 mm magnesium prims- Application in telecoms industry

Prismatic fixture- Application in automotive industry

CUBES AND PRISM SAMPLES

Page 6: PRISMS AND CUBES · STANDARD INSERTATION ALUMINIUM PRISMS STANDARD INSERTATION MAGNESIUM PRISMS ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N INSERT M8 OPTIONS DELIV. WKS.

ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N° INSERT M8 OPTIONS DELIV. WKS.

Ø 110 78 78 78 0,8 20 - 6

Ø 110 110 110 130 2,6 41 - 6

Ø 156 110 110 110 2,2 45 - 6

Ø 156 156 156 176 7 45 - 6

Ø 180Ø 181Ø 335

127 127 127 3 45 - 6

Ø 180Ø 181Ø 335

198 198 223 12 80 - 6

Ø 240Ø 432, IØ 440

180 180 180 7 45 - 6

Ø 240Ø 432, IØ 440

240 240 275 22,6 80 - 6

Ø 335Ø 440 240 240 240 15 80 - 6

Ø 180Ø 181Ø 335

180 180 215 11 45 - 6

Ø 432, M, IØ 440 335 335 370 63 176 THW 8

Ø 432, M, IØ 440 350 350 380 53 120 THW 8

STANDARD INSERTATION ALUMINIUM CUBES

STANDARD INSERTATION MAGNESIUM CUBES

ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N° INSERT M8 OPTIONS DELIV. WKS.

Ø 110 78 78 78 0,6 20 - 10

Ø 110 110 110 130 2 41 - 10

Ø 156 110 110 110 1,5 45 - 10

Ø 156 156 156 176 5 45 - 10

Ø 180Ø 181Ø 335

127 127 127 2 45 - 10

Ø 180Ø 181Ø 335

198 198 223 8 80 - 10

Ø 240Ø 432, IØ 440

180 180 180 5 45 - 10

Ø 240Ø 432, IØ 440

240 240 275 15 80 - 10

Ø 335Ø 440 240 240 240 10 80 - 10

Ø 180Ø 181Ø 335

180 180 215 7,5 45 - 10

Ø 432, M, IØ 440 335 335 370 43 176 THW 8

Ø 432, M, IØ 440 350 350 380 35 120 THW 8

Page 7: PRISMS AND CUBES · STANDARD INSERTATION ALUMINIUM PRISMS STANDARD INSERTATION MAGNESIUM PRISMS ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N INSERT M8 OPTIONS DELIV. WKS.

ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N° INSERT M8 OPTIONS DELIV. WKS.

Ø 180Ø 181Ø 335

180 180 100 7 34 - 6

Ø 180Ø 181Ø 335

280 280 190 31 58 - 6

Ø 240Ø 432, M, I

Ø 440280 280 190 31 58 - 6

Ø 335Ø 440

330 330 190 42 50 THW 8

Ø 432, M, I 440 440 245 68 170 THW 8

Ø 440 440 440 245 68 170 THW 8

Ø 432, M, I 445 525 245 95 160 THW 8

Ø 440 445 525 245 95 160 THW 8

STANDARD INSERTATION ALUMINIUM PRISMS

STANDARD INSERTATION MAGNESIUM PRISMS

ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N° INSERT M8 OPTIONS DELIV. WKS.

Ø 180Ø 181Ø 335

180 180 100 5 34 - 10

Ø 180Ø 181Ø 335

280 280 190 21 58 - 10

Ø 240Ø 432, M, I

Ø 440280 280 190 21 58 - 10

Ø 335Ø 440 330 330 190 28 50 THW 8

Ø 432, M, I 440 440 245 46 170 THW 8

Ø 440 440 440 245 46 170 THW 8

Ø 432, M, I 445 525 245 64 160 THW 8

Ø 440 445 525 245 64 160 THW 8

Page 8: PRISMS AND CUBES · STANDARD INSERTATION ALUMINIUM PRISMS STANDARD INSERTATION MAGNESIUM PRISMS ARMATURE LENGHT (mm) WIDTH (mm) HEIGHT (mm) MASS (kg) N INSERT M8 OPTIONS DELIV. WKS.

ARMATURES

A B C

D E F

G

OTHER ARMATURES‘ SIZES AVAILABLE ON REQUEST

ISO 9001 - Cert. n. 2156/3

CENTROTECNICA S.r.l. Headquarter and Test House: Via N. Sauro, 1 - 20068 Peschiera Borromeo (MI) - ITALYProduction Unit and Test House: Via F. Confalonieri, 23 - 20060 Masate (MI) - ITALYTel: +39 02 55305888 - Fax: +39 02 45503582Email: [email protected] - Website: www.centrotecnica.net

CT/0

4.13

/Eng

./Re

v. 1

ARMATURES SAMPLES