Printer 2-Page Spread OFC-OBCamerilifteq.com/wp-content/uploads/2016/01/H550-700F-Brochure.pdf · 4...
-
Upload
nguyenduong -
Category
Documents
-
view
216 -
download
0
Transcript of Printer 2-Page Spread OFC-OBCamerilifteq.com/wp-content/uploads/2016/01/H550-700F-Brochure.pdf · 4...
14
3
4
16 28 A12
B
C
D
31
Head Clearance43.7 (1110)
Operator Seat Height
143.0 (3630) - H550F/FS144.5 (3670) - H620-700F/FS137.4 (3490) - H550FS
139.8 (3550) - H620-700F137.5 (3495) - H550FS139.5 (3545) - H620-700FS
See Mast Charts ForAvailable Masts And
Maximum Fork Heights.
E
18
F
29
H29
G
13
1615
Hyster® H550-700F/FS Lift Truck Dimensions
Circled dimensions correspond to the line numbers on the tabulated chart inside the Technical Guide. Dimensions are in inches (millimeters).Truck shown with optional equipment - strobe, light package and TouchPoint™ e-hydraulics with adjustable armrest and LP tank.
2
MODEL A B C D E F G H
H550FS 41.0 (1040) 80% 75.5 (1920) 92.7 (2355) 120.0 (3040) 110.0 (2795) 95.5 (2425) 108.8 (2765)H620FS 50.0 (1260) 70% 77.0 (1955) 94.1 (2390) 133.0 (3380) 124.0 (3150) 95.5 (2425) 109.8 (2790)H700FS 50.0 (1260) 70% 77.0 (1955) 94.1 (2390) 133.0 (3380) 124.0 (3150) 95.5 (2425) 109.8 (2790)H550F 41.0 (1040) 84% 75.5 (1920) 92.7 (2355) 120.0 (3040) 110.0 (2795) 95.5 (2425) 108.8 (2765)H620F 50.0 (1260) 70% 77.0 (1955) 94.1 (2390) 133.0 (3380) 124.0 (3150) 95.5 (2425) 109.8 (2790)H650F 41.0 (1040) 95% 77.0 (1955) 94.1 (2390) 133.0 (3380) 124.0 (3150) 95.5 (2425) 109.8 (2790)H700F 50.0 (1260) 70% 77.0 (1955) 94.1 (2390) 133.0 (3380) 124.0 (3150) 95.5 (2425) 109.8 (2790)
Hyster® H550-700F/FS Lift Truck Dimensions
3
1 Manufacturer Name Hyster Company Hyster Company Hyster Company Hyster Company Hyster Company Hyster Company Hyster Company
2 Model H550FS H620FS H700FS H550F H620F H650F H700F
Transmission Powershift Powershift Powershift Powershift Powershift Powershift Powershift
Engine Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3
3 Rated Capacity lb. (kg) 55,000 (25,000) 62,000 (28,000) 70,000 (32,000) 55,000 (25,000) 62,000 (28,000) 65,000 (30,000) 70,000 (32,000)
4 Load Center, Distance in. (mm) 36.0 (9000) 36.0 (900) 36.0 (900) 48.0 (1200) 48.0 (1200) 48.0 (1200) 48.0 (1200)
5 Power Type - Gasoline, LPG, Diesel Diesel Diesel Diesel Diesel Diesel Diesel Diesel
6 Operator Type Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider
7 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic
8 Wheels, Number - Front / Rear 4x / 2 4x / 2 4x / 2 4x / 2 4x / 2 4x / 2 4x / 2
9 Lift Height, Top of Fork (TOF) in. (mm) 124.5 (3163) 124.5 (3163) 124.5 (3163) 124.5 (3163) 124.5 (3163) 124.5 (3163) 124.5 (3163)
10 Forks, Thickness x Width x Length in. 4.5 X 8.0 X 72.0 4.5 X 12.0 X 72.0 4.5 X 12.0 X 72.0 4.5 X 8.0 X 96.0 4.5 X 12.0 X 96.0 4.5 X 12.0 X 96.0 42.0 X 3.9 X 1.6
Forks, Thickness x Width x Length (mm) (114 X 203 X 1830) (114 X 305 X 1830) (114 X 305 X 1830) (114 X 203 X 2438) (114 X 305 X 2438) (114 X 305 X 2438) (114 X 305 X 2438)
11 Mast Tilt Angles, Forward / Backward Degrees˚ 6F / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B
12 Truck Length To Face of Forks in. (mm) 226.1 (6629) 235.6 (5984) 246.6 (6264) 252.1 (6403) 261.6 (6645) 273.1 (6937) 281.6 (7153)
13 Overall Width, Standard Tread in. (mm) 120.0 (3040) 133.0 (3380) 133.0 (3380) 120.0 (3040) 133.0 (3380) 133.0 (3380) 133.0 (3380)
14 Height, Standard Mast - Lowered in. (mm) 155.0 (3937) 168.5 (4280) 168.5 (4280) 155.0 (3937) 168.5 (4280) 168.5 (4280) 168.5 (4280)
Height, Standard Mast - Extended without LBR in. (mm) 215.0 (5460) 228.2 (5798) 228.2 (5798) 215.0 (5460) 228.2 (5798) 228.2 (5798) 228.2 (5798)
15 Turning Radius, Minimum Outside (OTR) in. (mm) 211.2 (5365) 215.3 (5469) 228.0 (5790) 241.3 (6129) 245.3 (6231) 264.4 (6716) 268.4 (6817)
16 Load Face, Center of Wheel to Face of Forks in. (mm) 41.1 (1045) 42.1 (1069) 42.1 (1069) 41.1 (1045) 42.1 (1069) 42.1 (1069) 42.1 (1069)
17 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 252.3 (6408) 257.4 (6538) 270.1 (6860) 282.3 (7170) 294.7 (7555) 306.5 (7785) 310.5 (7890)
18 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 188.5 (4788) 199.1 (5057) 205.5 (5220) 203.7 (5174) 214.2 (5440) 221.8 (5634) 225.8 (5735)
19 Travel Speed, Standard Transmission RL mph (km / h) 18.4 (29.6) 16.3 (26.2) 16.3 (26.2) 18.4 (29.6) 16.3 (26.2) 16.3 (26.2) 16.3 (26.2)
20 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 49.2 (0.250) / 99.6 (0.506) 40.0 (0.203) / 81.7 (0.415) 40.0 (0.203) / 81.7 (0.415) 61.0 (0.31) / 131.0 (0.67) 46.0 (0.23) / 106.0 (0.54) 46.0 (0.23) / 106.0 (0.54) 46.0 (0.23) / 106.0 (0.54)
21 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 45.0 (0.23) / 96.0 (0.49) 65.0 (0.33) / 90.0 (0.46) 65.0 (0.33) / 96.0 (0.49) 45.0 (.23) / 96.0 (0.49) 65.0 (0.33) / 90.0 (0.46) 65.0 (0.33) / 94.0 (0.48) 65.0 (0.33) / 96.0 (0.49)
22 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 37,635 (17,070) 42,655 (19,348) 42,655 (19,348) 37,635 (17,070) 42,655 (19,348) 42,655 (19,348) 42,655 (19,348)
23 Gradeability, Standard Transmission @ 1 mph RL/NL Percent % 29 / 31 30 / 30 31 / 29 31 / 31 33 / 30 36 / 30 33 / 28
24 Weight, Standard Truck (2-Stg. LFL 86 / 129) NL lb. (kg.) 73,551 (33,362) 90,429 (41,018) 91,035 (41,293) 77,056 (34,952) 93,472 (42,398) 92,182 (41,813) 95,323 (43,238)
25 Axle Loading, Static Front / Rear RL lb. (kg.) 116,583 (52,881) / 12,084 (5481) 136,706 (62,009) / 15,452 (7009) 147,979 (67,122) / 13,605 (6171) 121,539 (55,129) / 10,633 (4823) 142,690 (64,723) / 12,511 (5675) 147,522 (66,915) / 10,798 (4898) 152,567 (69,203) / 13,305 (6035)
26 Tire Size, Front 14.0 x 24.0 – 28 Ply 16.0 X 25 – 24 Ply 16.0 X 25 – 28 Ply 14.0 X 24 – 28 Ply 16.0 X 25 – 24 Ply 16.0 X 25 – 24 Ply 16.0 X 25 – 28 Ply
27 Tire Size, Rear 14.0 x 24.0 – 28 Ply 16.0 X 25 – 24 Ply 16.0 X 25 – 28 Ply 14.0 X 24 – 28 Ply 16.0 X 25 – 24 Ply 16.0 X 25 – 24 Ply 16.0 X 25 – 28 Ply
28 Wheelbase in. (mm) 144.0 (3660) 144.0 (3660) 155.0 (3940) 170.0 (4320) 170.0 (4320) 190.0 (4826) 190.0 (4826)
29 Tread, Center to Center of Tires, Steer-Drive in. (mm) 104.0 (2640) / 94.0 (2390) 116.0 (2950) / 92.0 (2355) 116.0 (2950) / 92.0 (2355) 104.0 (2640) / 94.0 (2390) 116.0 (2950) / 92.0 (2355) 116.0 (2950) / 92.0 (2355) 116.0 (2950) / 92.0 (2355)
30 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 13.5 (343) 15.0 (381) 15.0 (381) 13.5 (343) 15.0 (381) 15.0 (381) 15.0 (381)
31 Ground Clearance, Center of Wheelbase NL in. (mm) 20.5 (520) 22.0 (559) 22.0 (559) 20.5 (520) 22.0 (559) 22.0 (559) 22.0 (559)
32 Service / Parking - Method of Control Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic
33 Service / Parking - Method of Operation Hand / Hydraulic Hand / Hydraulic Hand / Hydraulic Hand / Hydraulic Hand / Hydraulic Hand / Hydraulic Hand / Hydraulic
34 Battery Type Maintenance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free
35 Volts / Cold Cranking Amps v / cca 24 / 660 24 / 660 24 / 660 24 / 660 24 / 660 24 / 660 24 / 660
36 Engine, Manufacturer / Model Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3
37 Permanent Output @ 2000 RPM hp/kw 230/172 230/172 230/172 230/172 230/172 230/172 230/172
38 Number of Cylinders / Displacement No. / ci (cc) 6 / 504.5 (8267) 6 / 504.5 (8267) 6 / 504.5 (8267) 6 / 504.5 (8267) 6 / 504.5 (8267) 6 / 504.5 (8267) 6 / 504.5 (8267)
39 Transmission Type, Standard Powershift Powershift Powershift Powershift Powershift Powershift Powershift
Governor Setting NL RPM 2200 2200 2200 2200 2200 2200 2200
40 Auxillary Hydraulic Pressure Relief for Attachments PSI (Mpa) 3200 (22,050) 3200 (22,050) 3200 (22,050) 3200 (22,050) 3200 (22,050) 3200 (22,050) 3200 (22,050)
PERF
ORM
ANCE
†W
TTI
RES
&W
HEE
LSPO
WER
TRAI
ND
IMEN
SIO
NS
GEN
ERAL
4
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
† NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
†† Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer.
mpany Hyster Company Hyster Company Hyster Company Hyster Company
FS H550F H620F H650F H700F
hift Powershift Powershift Powershift Powershift
SC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3
,000) 55,000 (25,000) 62,000 (28,000) 65,000 (30,000) 70,000 (32,000)
900) 48.0 (1200) 48.0 (1200) 48.0 (1200) 48.0 (1200)
l Diesel Diesel Diesel Diesel
n Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider
tic Pneumatic Pneumatic Pneumatic Pneumatic
4x / 2 4x / 2 4x / 2 4x / 2
63) 124.5 (3163) 124.5 (3163) 124.5 (3163) 124.5 (3163)
0 X 72.0 4.5 X 8.0 X 96.0 4.5 X 12.0 X 96.0 4.5 X 12.0 X 96.0 42.0 X 3.9 X 1.6
X 1830) (114 X 203 X 2438) (114 X 305 X 2438) (114 X 305 X 2438) (114 X 305 X 2438)
1 B 6F / 10B 6F / 10B 6F / 10B 6F / 10B
264) 252.1 (6403) 261.6 (6645) 273.1 (6937) 281.6 (7153)
3380) 120.0 (3040) 133.0 (3380) 133.0 (3380) 133.0 (3380)
280) 155.0 (3937) 168.5 (4280) 168.5 (4280) 168.5 (4280)
5798) 215.0 (5460) 228.2 (5798) 228.2 (5798) 228.2 (5798)
790) 241.3 (6129) 245.3 (6231) 264.4 (6716) 268.4 (6817)
069) 41.1 (1045) 42.1 (1069) 42.1 (1069) 42.1 (1069)
860) 282.3 (7170) 294.7 (7555) 306.5 (7785) 310.5 (7890)
5220) 203.7 (5174) 214.2 (5440) 221.8 (5634) 225.8 (5735)
.2) 18.4 (29.6) 16.3 (26.2) 16.3 (26.2) 16.3 (26.2)
81.7 (0.415) 61.0 (0.31) / 131.0 (0.67) 46.0 (0.23) / 106.0 (0.54) 46.0 (0.23) / 106.0 (0.54) 46.0 (0.23) / 106.0 (0.54)
6.0 (0.49) 45.0 (.23) / 96.0 (0.49) 65.0 (0.33) / 90.0 (0.46) 65.0 (0.33) / 94.0 (0.48) 65.0 (0.33) / 96.0 (0.49)
1 ,348) 37,635 (17,070) 42,655 (19,348) 42,655 (19,348) 42,655 (19,348)
9 31 / 31 33 / 30 36 / 30 33 / 28
4 ,293) 77,056 (34,952) 93,472 (42,398) 92,182 (41,813) 95,323 (43,238)
13,605 (6171) 121,539 (55,129) / 10,633 (4823) 142,690 (64,723) / 12,511 (5675) 147,522 (66,915) / 10,798 (4898) 152,567 (69,203) / 13,305 (6035)
– 28 Ply 14.0 X 24 – 28 Ply 16.0 X 25 – 24 Ply 16.0 X 25 – 24 Ply 16.0 X 25 – 28 Ply
28 Ply 14.0 X 24 – 28 Ply 16.0 X 25 – 24 Ply 16.0 X 25 – 24 Ply 16.0 X 25 – 28 Ply
3940) 170.0 (4320) 170.0 (4320) 190.0 (4826) 190.0 (4826)
2.0 (2355) 104.0 (2640) / 94.0 (2390) 116.0 (2950) / 92.0 (2355) 116.0 (2950) / 92.0 (2355) 116.0 (2950) / 92.0 (2355)
381) 13.5 (343) 15.0 (381) 15.0 (381) 15.0 (381)
59) 20.5 (520) 22.0 (559) 22.0 (559) 22.0 (559)
draulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic
raulic Hand / Hydraulic Hand / Hydraulic Hand / Hydraulic Hand / Hydraulic
n e Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free
0 24 / 660 24 / 660 24 / 660 24 / 660
SC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3 Cummins QSC8.3
2 230/172 230/172 230/172 230/172
8267) 6 / 504.5 (8267) 6 / 504.5 (8267) 6 / 504.5 (8267) 6 / 504.5 (8267)
hift Powershift Powershift Powershift Powershift
0 2200 2200 2200 2200
050) 3200 (22,050) 3200 (22,050) 3200 (22,050) 3200 (22,050)
TRUCK CONFIGURATION:• 2-Stage FFL mast at highest non-highlift (HNHL) (124.5” (3165 mm) Maximum Fork Height (MFH).• 114.0” (2900 mm) Standard Carriage with load backrest extension (LBE).• Basic truck equipped with the Mazda 2.0L gasoline engine with single-speed electronic powershift transmission.
500
10,000
15,000
20,000
25,000
30,000
35,000
800 1000 1200 1400 1600 1800 2000
20,000
30,000
40,000
50,000
60,000
70,000
80,000
20 30 40 50 60 70 80
RATE
DLO
AD(lb
s)
LOAD CENTER (in)
RATE
DLO
AD(k
g)
LOAD CENTER (mm)
RATED LOAD vs. LOAD CENTERSTANDARD CARRIAGE
U. S. CUSTOMARY
RATED LOAD vs. LOAD CENTERSTANDARD CARRIAGE
METRIC
H700F
H650F
H550F
H620F
H650F H700F
H620F
H550F
500
10,000
15,000
20,000
25,000
30,000
35,000
800 1000 1200 1400 1600 1800 2000
LOAD CENTER (mm)
H650F H700F
H620F
H550F
RATE
DLO
AD(k
g)
RATED LOAD vs. LOAD CENTERINTEGRAL SIDESHIFT ATTACHMENT
METRIC
20,000
30,000
40,000
50,000
60,000
70,000
80,000
30 40 50 60 70 80 90
LOAD CENTER (in)
H650F
H700F
H620F
H550FRATE
DLO
AD(lb
s)
RATED LOAD vs. LOAD CENTERINTEGRAL SIDESHIFT ATTACHMENT
U. S. CUSTOMARY
5
Hyster® H550-700F Lift Truck Rated Capacities
TRUCK CONFIGURATION:• 2-Stage FFL mast at highest non-highlift (HNHL) (124.5” (3165 mm) Maximum Fork Height (MFH).• 114.0” (2900 mm) Standard Carriage with load backrest extension (LBE).• Basic truck equipped with the Mazda 2.0L gasoline engine with single-speed electronic powershift transmission.
500
10,000
15,000
20,000
25,000
30,000
35,000
400 600 800 1000 1200 1400 1600
20,000
30,000
40,000
50,000
60,000
70,000
80,000
10 20 30 40 50 60 70
500
10,000
15,000
20,000
25,000
30,000
35,000
400 600 800 1000 1200 1400 1600
20,000
30,000
40,000
50,000
60,000
70,000
80,000
10 20 30 40 50 60 70
LOAD CENTER (in)
LOAD CENTER (mm)
RATE
DLO
AD(lb
s)
LOAD CENTER (in)
RATE
DLO
AD(lb
s)
RATE
DLO
AD(k
g)
LOAD CENTER (mm)
RATE
DLO
AD(k
g)
RATED LOAD vs. LOAD CENTERINTEGRAL SIDESHIFT ATTACHMENT
U. S. CUSTOMARY
RATED LOAD vs. LOAD CENTERSTANDARD CARRIAGE
U. S. CUSTOMARY
RATED LOAD vs. LOAD CENTERINTEGRAL SIDESHIFT ATTACHMENT
METRIC
RATED LOAD vs. LOAD CENTERSTANDARD CARRIAGE
METRIC
H620FS
H700FS
H550FS
H620FSH700FS
H550FS
H620FS
H700FS
H550FS
H620FS
H700FS
H550FS
6
Hyster® H550-700FS Lift Truck Rated Capacities
H550F/FS MAST DIMENSIONSMaximum Fork Overall Lowered Overall Extended Height Approximate Total Weight of Standard Equipped TruckHeight (TOF) † Height without LBE H550FS/H550F w/NL H550FS/H550F w/RL
in. (mm) in. (mm) in. (mm) lbs. (kg) lbs. (kg)2-STAGE LIMITED FREE-LIFT (LFL) VISTA® MAST
124.5 (3162) 155.0 (3937) 215.0 (5461) 71758 (32543) / 71918 (32616) 71758 (32543) / 71918 (32616)
172.5 (4382) 179.0 (4547) 263.0 (6680) 73103 (33153) / 73263 (33226) 73103 (33153) / 73263 (33226)
196.5 (4991) 191.0 (4851) 287.0 (7290) 73357 (33268) / 73517 (33341) 73357 (33268) / 73517 (33341)
220.5 (5600) 203.0 (5156) 311.0 (7899) 74271 (33683) / 74431 (33756) 74271 (33683) / 74431 (33756)
244.5 (6210) 215.0 (5461) 335.0 (8509) 74767 (33908) / 74927 (33980) 74767 (33908) / 74927 (33980)
364.5 (9258) 275.0 (6985) 455.0 (11,557) 77532 (35162) / 77692 (35235) 77532 (35162) / 77692 (35235)
† Lift heights over 196.5” (4991 mm) maximum fork height are considered highlifts and require reduced capacity and restricted back tilt.
Total approximate weights listed include mast, standard carriage, load backrest extension and 70 lbs. LP tank and tank bracket.
RL = Rated Load NL = No Load LBE = Load Backrest Extension
7
Hyster® H550-700F/FS Mast Specifications
H620/650/700F MAST DIMENSIONSMaximum Fork Overall Lowered Overall Extended Height Approximate Total Weight of Standard Equipped TruckHeight (TOF) † Height without LBE H620F/H650F/H700F w/NL H620F/H650F/H700F w/RL
in. (mm) in. (mm) in. (mm) lbs. (kg) lbs. (kg)2-STAGE LIMITED FREE-LIFT (LFL) VISTA® MAST
124.5 (3162) 168.5 (4277) 228.0 (5800) 87,814 (39,825) / 86,529 (39,242) / 89,669 (40,666) 87,814 (39,825) / 86,529 (39,242) / 89,669 (40,666)
172.5 (4382) 192.5 (4887) 276.5 (7020) 89,174 (40,442) / 87,889 (39,859) / 91,029 (41,283) 89,174 (40,442) / 87,889 (39,859) / 91,029 (41,283)
220.5 (5600) 216.5 (5496) 324.0 (8848) 90,734 (41,149) / 89,449 (40,556) / 92,589 (41,990) 90,734 (41,149) / 89,449 (40,556) / 92,589 (41,990)
268.5 (6820) 240.5 (6106) 372.0 (9458) 92,470 (41,937) / 91,185 (41,354) / 94,325 (42,778) 92,470 (41,937) / 91,185 (41,354) / 94,325 (42,778)
364.5 (9258) 288.5 (7345) 468.0 (11,896) 94,746 (42,969) / 93,461 (42,386) / 96,601 (43,810) 94,746 (42,969) / 93,461 (42,386) / 96,601 (43,810)
388.5 (9868) 300.5 (7640) 492.5 (12,506) 95,341 (43,239) / 94,056 (42,656) / 97,196 (44,080) 95,341 (43,239) / 94,056 (42,656) / 97,196 (44,080)
† Lift heights over 196.5” (4991 mm) maximum fork height are considered highlifts and require reduced capacity and restricted back tilt.
Total approximate weights listed include mast, standard carriage, load backrest extension and 70 lbs. LP tank and tank bracket.
RL = Rated Load NL = No Load LBE = Load Backrest Extension
Hyster® H550-700F/FS Standard Features and Options
MASTSVISTA® masts provide good visibility. Welded mast chan-
nels and formed cross members provide durable weldments.Six standard masts for the H550F/FS trucks and six for theH620-700F/FS trucks provide versatility to match applications.
CARRIAGEPin-type carriage with fork positioners provides durability.
Optional pin-type sideshift with integral carriage and forkpositioners adds versatility. Overall width:
H550F/FS 114.0 (2900 mm)
H620-700F/FS 124.0 (3150 mm)
FORKSH550F/FS series features:4.50” x 8.00” x 72.0” (115 x 205 x 1830 mm) or 4.00 x 11.00 x 96.0 (102 x 280 x 2440 mm).
H620-700F/FS series features:4.10” x 11.80” x 96.0” (105 x 300 x 2440 mm) or 4.50 x 12.00 x 72.0 to 96.0 (115 x 305 x 1830 to 2440 mm).
Inside to inside, minimum fork spacing for the H550-F/FSwith the standard or sideshift carriage is 39.8 (1010 mm) and37.0 (940 mm) for the H620-700F/FS.
Maximum, outside to outside distance for the H550F/FSwith standard or sideshift carriage is 108.3 (2750 mm) and117.7 (2990 mm) for the H620-700F/FS.
ENGINESEach truck is equipped with the 4-cycle, in-line, 6-cylinder
Cummins QSC8.3-216 turbocharged Diesel engine with 506.6cu. in. (8300 cu. cm.) displacement; 4.50 (114 mm) bore; 5.30(135 mm) stroke for heavy-duty applications meeting all EPAstandards. Standard items include 24-volt electrical system;70-amp, heavy-duty alternator with integral regulator anddust-proof starter; two cartridge-type oil filters; mechanicalfuel pump; heavy-duty dry-type air cleaner with centrifugalpre-cleaner and outside, high-level air intake; restriction indi-cator; and overhead exhaust. Maximum torque is 567 ft. lbs.(770 N•m) at 1,500 RPM. Mechanical governor governs speedat 2500 RPM.
14.9 PSI cooling system includes heavy-duty radiator, ther-mostat and bypass; and puller-type fan. Large heat exchangercools transmission oil.
TRANSMISSIONThree-speed powershift transmission and torque converter
produce smooth shifting, precise inching, fast acceleration,and withstands rugged duty cycles. Gull-wing hood provideseasy access to check transmission oil.
HYDRAULIC SYSTEMHydraulic system operates at 2500 PSI (17,250 kPa).
Restriction indicators signal when filters need replacement.
25-micron hydraulic filters are easily accessed. Two gear-typemechanical pumps provide 108 GPM maximum output. Flowamplifier saves energy by diverting only the required amountof oil for steering. Automatic, two-speed system increases liftspeed in no-load situations.
STEER AXLE / STEER SYSTEMFully-hydrostatic power steering provides fast, low-effort
maneuvering. Equal area, double-ended cylinder makes for abalanced steering system, with an equal number of lock-to-lock turns in both directions. Steering cylinder is transversemounted in one-piece welded axle frame. Wheel spindles andhubs are mounted on pre-lubed and sealed, tapered rollerbearings for reduced maintenance.
BRAKESNon-asbestos brakes are standard equipment. Service
brakes consist of hydraulic wet disc wheel brakes and discbrake on the drive line. Spring-actuated drive-line park brakeapplies automatically when pressure falls below 1200 PSI.
Special attachments, equipment or accessories not listed above may be available through ApplicationsEngineering for specific application requirements.
9
CAPACITY:Model H550FS: 55,000 lbs. at 36.0” (25,000 kg at 900 mm) load center.Model H550F: 55,000 lbs. at 48.0” (25,000 kg at 1200 mm) load center.Model H620FS: 62,000 lbs. at 36.0” (28,000 kg at 900 mm) load center.Model H620F: 62,000 lbs. at 48.0” (28,000 kg at 1200 mm) load center.Model H650F: 65,000 lbs. at 48.0” (30,000 kg at 1200 mm) load center.Model H700FS: 70,000 lbs. at 36.0” (32,000 kg at 900 mm) load center.Model H700F: 70,000 lbs. at 48.0” (32,000 kg at 1200 mm) load center.
Rated capacities:Rated capacities for H550F/FS truck include being equipped with a two-stage VISTA® mast
to 124.5 (3165 mm) maximum fork height; 114.0 (2900 mm) standard carriage with 72.0-96.0(1830-2440 mm) long forks as required; diesel engine and Powershift transmission.
The H620-700F/FS trucks are equipped with a 124.0 (3150 mm) standard carriage with90.0-96.0 (2290-2440 mm) long forks as required; diesel engine and Powershift transmission.
STANDARD EQUIPMENTH550F/FS trucks include the following features as standard equipment. H550FS truck has
144.0 (3660 mm) wheelbase; H550F has 170.0 (4320 mm) wheelbase. Each truck has CumminsQSC8.3-216 diesel engine; 2-stage VISTA® mast with 124.5 (3165 mm) maximum fork height;114.0 (2900 mm) standard carriage with fork positioners; 72.0 (1830 mm) long forks (H550FS),96.0 (2440 mm) long forks (H550F); 6 degrees forward, 10 degrees back tilt; suspension seatwith folding armrests; adjustable hydraulic control console; tilt steering pod with soft-touchsteering wheel; overhead guard; light group; powershift transmission; 4-function hydraulic valve;operator restraint system; side view mirrors; horn; reverse audible alarm; and operating manual.
H620/700FS trucks include the following features as standard equipment. H620/700FS truckhas 155.0 (3940 mm) wheelbase; H620F truck has 170.0 (4320 mm) wheelbase; H650/700F has190.0 (4830 mm) wheelbase. Each truck has Cummins QSC8.3-216 diesel engine; 2-stageVISTA® mast with 124.5 (3165 mm) maximum fork height; 124.0 (3150 mm) standard carriagewith fork positioners; 72.0 (1830 mm) long forks (H620, 700FS), 96.0 (2440 mm) long forks(H620-700F); 6 degrees forward, 10 degrees back tilt; suspension seat with folding armrests;adjustable hydraulic control console; tilt steering pod with soft-touch steering wheel; overheadguard; light group; powershift transmission; 4-function hydraulic valve; operator restraint sys-tem; side view mirrors; horn; reverse audible alarm; and operating manual.
OPTIONAL EQUIPMENTOptional equipment includes 14.00 x 24 x 28 ply off-road tires; two-door cab; lifting eyes; tilt
indicator; light groups; integral sideshift; pin-type forks; empty container handling forks; 20-40”container handling attachment; low and high-mount fork packages; and twist locks.
Hyster CompanyP.O. Box 7006Greenville, North Carolina27835-7006
Part No.: H550-700F/TG 2/2006 Litho in U.S.A.
Visit us online at www.hysterusa.com or call us at 1-800-HYSTER-1.
Hyster, , SpaceSaver, VISTA and MONOTROL are registered trademarks of Hyster Company. Fortis,DuraMatch, Pacesetter VSM, TouchPoint, TouchControl, Challenger, and are trademarks of Hyster Company. Hyster products are subject to change without notice.
The Hyster Company products included in this document may be coveredby US Patent 6,684,148, and other patents pending.